795 jobs found

Field Service Technician II - Production Equipment (3rd shift - 11:00 pm - 7:00 am / Sun - Thurs) US-OH-Dublin Job ID: 33982 Type: Full-Time # of Openings: 1 Category: Field Service OH - Dublin About the Role Spotting a solution and fixing a problem is a tremendous technical skillset. It requires diligence, determination, and a knack for knowledge. Does this sound like you? If so, Canon USA, an innovator of technology, solutions, and services, wants to meet you. We're ready to bring aboard individuals who strive for excellence in operational, maintenance, and networking support to help our valued customers with basic technical expertise of Canon-supported products. Your Impact We're actively seeking an individual to: Diagnose basic mechanical, software, network, and system failures using established procedures. Service and repair designated equipment to Canon standards and specifications. Maintain working knowledge and aptitude of multiple product groups. This includes basic aspects of troubleshooting and diagnostics. Meet and exceed customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance. Properly maintain all technical information, Field Service Reports, Expense Reports, and Canon property assigned. Maintain all technical information and Canon property assigned and provide direction to less experienced technicians. Provide the solutions of escalated technical and/or customer service-related problem areas for any territory requested. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We're looking for a dedicated individual with: HS Diploma, GED, or equivalent experience required, plus 1 to 2 years of related experience. A basic understanding of internet environments and the ability to complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class. The ability to travel (valid driver's license and acceptable driving record necessary). The capability to work in a 24/7 environment, while performing shift work and on-call rotations. Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). In accordance with applicable law, we are providing the anticipated hourly rate for this role: $21.50 to 30.75 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIfe911dc1cea7-0716

Maintenance Technician Maintenance Technician ABOUT US POAH Communities is a mission-driven organization managing over 13,000 affordable housing apartments. As part of the Preservation of Affordable Housing, Inc. family, our team of 500+ professionals believes that quality housing management goes beyond providing safe, comfortable homes; it's about creating environments where residents can thrive. Our commitment to excellence in affordable housing management serves as a foundation for resident success and community empowerment. See our employees in action and how you can contribute to the mission! ABOUT THE ROLE POAH Communities is seeking a highly qualified individual to serve as Maintenance Technician for The Washington at Woodlawn. This is a Local 1 Union position. This individual will be a bright and dynamic leader with hands-on experience. The Washington at Woodlawn Park comprises sixteen vintage apartment buildings in the Woodlawn and Washington Park neighborhoods. The Washington is another phase of POAH's revitalization of Woodlawn into a vibrant, healthy and attractive mixed-use/mixed-income urban community containing a variety of distinctive structures combining residential, commercial and recreational uses and driving the economic revitalization of Chicago's Woodlawn community just south of the University of Chicago. The Washington at Woodlawn Park : ABOUT YOUR IMPACT Insuring a safe, secure and comfortable living environment for residents, visitors and staff. Being knowledgeable of pertinent laws and EPA and OSHA regulations. Being aware of the condition of apartment property throughout the community and immediately initiate action to correct unsafe conditions. Scheduling and performing routine preventative maintenance on all appropriate equipment. Performing work area clean-up and safety related duties. Diagnosing and perform minor and routine maintenance/repairs. Insuring all make-ready repairs and services are completed. Inspecting and helping coordinate all needed make-ready repairs and services. Assisting in keeping grounds neat and clean. Rake, sweep, shovel as necessary. ABOUT YOU Must have at least 1 year experience in apartment maintenance. High School diploma or GED required. HVAC certification preferred. Must have a valid Driver's License and automobile insurance coverage as use of personal vehicle may be required. Must be able to work a flexible schedule with weekends and on-call basis as necessary. Must be knowledgeable and skilled in the safe use and maintenance of hand tools, power tools, user-moved aids, mechanical equipment, measuring devices. Must be able to perform the following duties 66-100% of the time: be on feet, bend/stoop/squat/kneel, climb stairs, push/pull, reach above shoulder, climb ladders, grasp/grip/turn, finger dexterity, lift/carry up to 75lbs, be able to read and understand maintenance forms and warning labels. Must be able to work in all weather conditions. BENEFITS AT POAH COMMUNITIES POAH Communities prioritizes the wellbeing of you and your family by offering a comprehensive benefits package: Health & Wellness: Medical, dental, and vision insurance; wellness programming including monthly webinars and medical insurance discounts Financial: 401(k) with up to 4% company match; FSA options for healthcare, dependent care, and commuting; Life & AD&D insurance; free financial coaching Time Off: 15 days of PTO (increases with tenure), 2 personal days, and 11 paid holidays annually. Paid Leave: 12 weeks Parental Leave; Bereavement; Jury Duty; Voting Incentives: Employee referral bonus, suggestion rewards, employee recognition programming Professional development opportunities: tuition reimbursement, mentorship program, ongoing training and learning sessions, professional certifications Our salary structure is competitive and reflects individual experience. POAH Communities embraces equal opportunity employment and values workforce diversity. For additional details, please visit our website at Stay connected with POAH and POAH Communities: Instagram Linkedin Pay Rate: $27.23 Compensation details: 27.23-27.23 PIadece86ddb20-8497

We're seeking skilled Heavy Equipment Operators for exciting projects in select U.S cities. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $30 - $36 per hour Benefits: Paid Time Off Medical Retirement Here's what Skillit needs from you: Past experience in construction equipment operator jobs or a related supporting industry. Past experience in operating different machinery used in construction, earthmoving or excavation. A valid commercial driver's license (CDL) or heavy equipment operator certificate is preferred for the job. Strong attention to detail, interpersonal skills, mechanical aptitude and the ability to follow safety protocols. Physical stamina to handle demanding job site conditions and long shifts. Ability to read, write and communicate in English. Understanding of GPS equipment and operations. Here's what you'll be doing: Operating heavy equipment such as bulldozers, graders, backhoes, compactors, excavators, graders, haul trucks and cranes to move earth, dig, load, haul and spread material. Ensuring safe equipment operation by conducting pre-use checks and regular maintenance inspections. Following project blueprints, site plans, and safety procedures to maintain efficient work. Coordinating with site managers, engineers, and other members of the construction staff to maintain workflow and project timelines. Adherence to all safety protocols and regulations to minimize occupational risks at the workplace. May require assisting with heavy physical activity (lifting/pushing/pulling objects weighing over 60 lbs) Operate machinery in varied weather conditions (wet, humid, hot, exposure to fumes/ dust/ vibrations)

Our mission is to help individuals live the best lives possible through better health and inclusion in a positive community! Job Description The Managers of 10 Fitness are expected to uphold and deliver the 10 Fitness member experience via being honest and committed individuals who are moldable, patient, and resilient. They should be leaders who are enthusiastic about helping others and have a strong desire to make a difference. All team members will contribute to running a clean, friendly, and well-maintained club; execute the team member basics of being on time and complying with company policies. The team member will strive to ensure a safe, fun, and interactive environment in a positive and professional manner. Management: Communicate with the Senior Management on all things related to members and sales. Communicate with Human Resources on all things related to staffing changes. Ensure that all signage and displays are correct at all times. Ensure a safe and friendly work environment by documenting and reporting all claims of harassment and discrimination, policy and safety violations, and injuries. Order all supplies needed for the club from the different vendors when needed. Control expenses on club P&L by managing payroll/overtime hours and not over-ordering supplies from vendors. Manage inventory to avoid missing items via locking up retail items, retaining and review packing slips, and entering new items into rapid restock. Manage cash handling via recording cash and checks received in a ledger, comparing to DataTrak report, and making accurate bank deposits weekly. Achieve monthly and yearly financial goals for the club as determined by Corporate. Attend all staff meetings as required. Provide Corporate with helpful information about how to improve its business in the club/market. Member Experience: Ensure that every member/guest is greeted by name with a smile. Ensure that all members/guests are on the right track and have what they need to accomplish their fitness goals. Ensure that all check-in and safety precautions are followed. Receive and obtain information from all incoming inquiries; direct to the appropriate recipients. Handle member service issues which may include lost and found items, scan-in issues, member change documents, questions about personal training, and any questions about billing and payments. Continue learning how to better yourself by completing any reading material or job training exercises/programs assigned to you by Senior Management. Promote and sell memberships and personal training. Ensure equipment and/or building is working properly; submit a maintenance ticket for any questionable items and ensure they are fixed in a timely manner. Immediately handle any and all incidents or member concerns. Record these in an incident report and keep on record. Club Cleanliness and Safety: Maintain a neat and well-organized work area. Perform routine safety check; follow up with Maintenance team, IT team, or Senior Management if there are any concerns. Re-rack equipment and weights, and clean equipment as needed. Commitment to Excellence Champion company values with pride. Champion the health and safety of all staff, members, and guests. Commit to providing the highest quality of products and services. Communicate with excellence at all times. Foster a positive work environment. Ensure accountability at all levels. Make sound decisions at all times. Qualifications / Experience: 1-2 years of experience in sales/customer service required Basic computer skills Certifications / Educational Level: High School Diploma or GED required CPR/AED certification required 10 Fitness approved Personal Training Certification preferred Bachelor's Degree in Business Administration, Exercise Science, or Kinesiology, or related field, is preferred Physical Requirements: This job duty often requires the employee to regularly stand for up to 8 hours, walk, kneel, reach with hands and arms, and effectively communicate. Employee must occasionally lift and/or move up to 50 pounds. Work Environment: Employee may be regularly exposed to moving mechanical parts while performing duties of this job. Employee may be exposed to higher volume levels of noise while in this environment. Compensation: Base hourly range: $20.00 - $24.00 Opportunity to earn monthly incentive bonuses up to $1,000 based on specified KPIs This job description intends to describe the general nature and level of work being performed by the people assigned to this job. It is not intended to include all duties and responsibilities. The order in which duties and responsibilities are listed is not significant. PI05dbe4b148a2-9593

National Radio Astronomy Observatory Title: Mechanical Engineer III Location: Green Bank Observatory, PO Box 2, GREEN BANK, West Virginia, United States of America Requisition Number: 147 Job Family: Mechanical Engineer Pay Type: Salary Required Education: ENG Position Description: Position Summary The National Radio Astronomy Observatory (NRAO) is an exciting and prestigious research facility that plays a vital role in the study of the universe. The Observatory operates a variety of radio telescopes that span the globe, including the famous Very Large Array (VLA) in New Mexico, the Green Bank Telescope in West Virginia, and the Atacama Large Millimeter/submillimeter Array (ALMA) in Chile. These telescopes are among the most advanced in the world, allowing astronomers to explore the universe in unprecedented detail. At the Green Bank Observatory, we are recruiting a Mechanical Engineer to join the Telescope Operations Division to support upcoming projects to bring new capabilities to our telescopes. In this role, you will take on impactful assignments across the breadth of telescope operations to deliver new infrastructure while maintaining existing telescope systems. Tasks include performing engineering analysis, driving design innovation, and executing projects that provide solutions to keep our world-class telescopes at the forefront of science. Your responsibilities will span the full project lifecycle: from design recommendations and procurement to manufacturing, construction, testing, and initial operations. This position requires a motivated person with high-level organizational skills who is comfortable working in an academic environment alongside engineers, scientists, and technical staff toward the overall mission of the Observatories. This position will be based on site at the Green Bank Observatory in Green Bank, WV. The position is initially available for a two-year appointment but may be extended or converted to a non-term appointment with budget and mutual interest. What You Will be Doing: Lead and contribute to the design, analysis, and integration of mechanical systems for major telescope subsystems, including thermal management, environmental enclosures, structural components, cable routing, and maintenance/access infrastructure Support the development, improvement, and deployment of mechanical assemblies associated with telescope instruments, receivers, and protective systems Coordinate with engineers, technicians, and cross-disciplinary teams to identify challenges, develop solutions, and ensure that designs meet functional, operational, and safety requirements Oversee or support the fabrication, installation, testing, and verification of mechanical systems, ensuring conformance with specifications, procedures, and quality standards Participate in observatory-wide engineering initiatives, contributing to both new development projects and the resolution of technical and operational issues Direct or collaborate with technical staff in the construction, maintenance, and repair of site equipment and support systems Assist in preparing project documentation including cost estimates, schedules, technical analyses, and recommendations for improvements or equipment procurement Maintain compliance with safety policies, identify and address unsafe conditions, and promote safe work practices Perform other engineering duties as assigned Work Environment Work is mission driven, team oriented and typically performed in an office setting within a research or development environment. Occasional field work in an industrial setting will be required. Who You Are: You have a Bachelor's Degree in Mechanical Engineering or a related field. You have at least 3 years' experience in related field. While not required, you may have a Master's Degree in Engineering and/or 5+ years of relevant experience. Competency Summary You are proficient in the use of computer and software packages such as Autocad and Inventor and be willing to learn such packages as Nastran (structural analysis software). You have high-level of competency in Microsoft software products and web-based systems, Visio and SharePoint. You have excellent communication skills - both verbally and in writing. You can apply critical attention to detail. You are highly organized. While not required, you may have experience with machining or manufacturing. Additional Requirements Will be required to stand and sit and perform fine hand manipulation. Must be able to operate a personal computer. Must work near moving mechanical parts and/or with electrical equipment. Occasionally required to climb or balance, and stoop, kneel, and crouch. May occasionally work and in high, precarious places and in outside weather conditions, and may be exposed to chemicals, or the risk of electrical shock. Must occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision, distance vision, color and depth perception. Observatory employees must be authorized to work in the United States. The Observatory presently cannot sponsor H-1B Visas for this position. Safety Sensitive The selected candidate must successfully pass a post-offer, pre-employment/pre-placement drug screen. Failure to pass the screen will disqualify the candidate from employment consideration for a period of six months from the date of the results. Total Rewards: Associated Universities, Inc. (AUI) offers a comprehensive total rewards package for this position, subject to eligibility requirements. We are committed to serving our employees and their families with an extensive and competitive compensation and benefits package that supports our employees' overall well-being and career growth. Compensation AUI strives to attract and retain dedicated, highly qualified, competent, and motivated employees by offering competitive compensation and recognition for performance. This is an open rank position, for a level III or IV Engineering position. Factors which may affect starting level placement may include education, experience, skills, competencies, other qualifications of the successful candidate. Benefits: AUI's benefits package addresses the needs of employees and their families with most benefits beginning on the first day of employment. AUI provides excellent paid time off (13 holidays, annual accrual of up to 24 vacation days and 15 sick days, additional time off for doctor/dentist visits, and 8 weeks of paid parental leave). Medical, dental and vision plans are effective on the first day of employment. AUI's retirement benefit contributes an amount equal to 10 percent of a qualified participant's base pay with no required employee contribution; we also offer an optional supplemental, tax-deferred plan for employee retirement contributions. Application Instructions: Select the "Apply Now" button. Please be prepared to upload your current CV/Resume and a cover letter describing interest and suitability for the position Equal Opportunity Employer Statement: AUI is an equal opportunity employer. To view our complete statement, please visit . If you require reasonable accommodation for any part of the application or hiring process, you may submit your request by sending an email to . PM20 PI1c9c81f417f3-4050

This is a remote based role with heavy travel. We are accepting applicants that currently reside in Florida, New Jersey, New York, or Toronto, Canada. Travel will be 50-80% for this role. About Us Hyperion Solutions is a technology-driven vertical transportation solution provider headquartered in Memphis, Tennessee, with offices across the United States. We connect trusted brands to deliver premier integrated solutions in Systems & Components, Digital Solutions, and Technical Services for the vertical transportation industry. As a rapidly growing company, we are continuously seeking positive, energetic, and passionate people to join our team. Torin Drive North America, a Hyperion brand, is a leading provider of geared and gearless machines for commercial and freight traction elevators. We are currently seeking a Field Service Technician to support our customers through technical assistance, site visits, and written communications. What You'll Do - Provide customers with training and technical support for the installation, repair, and troubleshooting of machines, motors, brakes, drives, controllers, and other electromechanical components - Troubleshoot, install, and repair components at customer sites and in the central facility - Create, complete, and document field service procedures - Organize, track, and analyze all service activities; maintain the field service database - Support new product development, including proper testing and qualification - Administer Certified Mechanic Training - Collaborate with the field support team to prioritize and execute tasks efficiently - Conduct root cause analysis to drive product improvement and process efficiency - Coordinate with factory and vendor technical support teams to resolve customer issues - Build and maintain positive professional relationships with customers and field staff - Perform other duties as assigned What You'll Bring - Preferred experience: elevator mechanic or service technician with hands-on installation, maintenance, troubleshooting, and diagnostics of elevator equipment - Strong interpersonal skills, grounded in honesty, ethics, and integrity - Excellent customer service and communication skills - Strong analytical and problem-solving abilities - Proficiency with Microsoft Office, Windows OS, web browsers, and search tools; SAP experience a plus - Punctuality, sense of urgency, self-motivation, and the ability to work both independently and as part of a team - Willingness and ability to travel domestically and internationally up to 80% based on field needs - Ability to work a minimum of 40 hours per week - Valid passport required Benefits At Hyperion Solutions, Inc., our employees are our most valuable asset. We offer: - Competitive salary - Generous benefits package - Opportunities for advancement - A positive work environment that encourages initiative and supports personal and professional growth Equal Opportunity Employer Hyperion Solutions is an Equal Opportunity Employer and does not discriminate against any employee or applicant based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, veteran status, disability, or any other protected class under federal, state, or local law. PI37b05e6d9c5e-6526

Our mission is to help individuals live the best lives possible through better health and inclusion in a positive community! Job Description The Assistant Managers of 10 Fitness are expected to uphold and deliver the 10 Fitness member experience via being honest and committed individuals who are moldable, patient, and resilient. They should be leaders who are enthusiastic about helping others and have a strong desire to make a difference. All team members will contribute to running a clean, friendly and well-maintained club; execute the team member basics of being on time and complying with company policies. The team member will strive to ensure a safe, fun, and interactive environment in a positive and professional manner. Management: Communicate daily with the General Manager on all things related to staff, members, and sales Work with the General Manager to ensure the club has adequate staffing at all times, including assisting in the hiring and firing of employees and recruiting of potential employees Provide a consistent line of communication to all employees through daily/weekly/monthly meetings that go over the following but not limited to: policy and procedure changes, sales updates, coaching & development, disciplinary reasons (under the direction of the GM), etc. Ensure that all signage and displays are correct at all times Ensure that all employees are aware and abide by company policies and procedures at all times Ensure a safe and friendly work environment by documenting and reporting all claims of harassment and discrimination, policy and safety violations, injuries, and other incidents In the absence of the General Manager, with the General Manager's approval, approve all time off requests and timecard changes on the payroll system Provide coaching to all staff to aide in their development of becoming model 10 Fitness employees and help guide employees for future growth within 10 Fitness. Coaching includes but is not limited to: mock sales tours, cleaning audits, Datatrak and payroll system instruction, customer service coaching, etc. Assist in the ordering of all supplies needed for the club from the different vendors when needed Assist the manager in controlling expenses on club P&L by managing payroll/overtime hours and not over-ordering supplies from vendors Manage inventory to avoid missing items by locking up retail items and retaining and reviewing packing slips Assist the General Manager in managing Group Exercise instructors, classes, and attendance (at applicable locations); make sure it is up to 10 Fitness' standards Achieve monthly and yearly financial goals for the club as determined by Corporate Lead and/or attend all staff meetings as required Provide Corporate with helpful information about how to improve its business in the club/market Member Experience: Ensure that every member/guest is greeted by name with a smile Ensure that all members/guests are on the right track and have what they need to accomplish their fitness goals Ensure all check-in and safety precautions are followed Receive and obtain information from all incoming inquiries, then direct to the appropriate recipients Handle member service issues which may include: lost and found items, member change forms, questions about personal training, and any questions about billing and payments. Go the extra mile with customer service for the member/guest via Second Mile Service Write and mail thank you cards to all new members daily Set Tanning beds and Massage Chairs Promote and sell memberships, merchandise, and supplements Promote Personal Training and Group Exercise Ensure that all employees are aware of appropriate workplace conduct and are held accountable for their actions and behavior Ensure equipment and/or facilities are working properly; submit a maintenance ticket for any questionable items and ensure they are fixed in a timely manner Club Cleanliness and Safety: Maintain a neat, well-organized work area which will include ensuring each employee has cleaned and organized their assigned zone Perform routine safety checks during assigned shift; follow up with maintenance or upper management if there are any concerns Commitment to Excellence: Champion company values with pride Champion the health and safety of all staff, members and guests Commit to providing the highest quality of products and services Communicate with excellence at all times Foster a positive work environment Develop those you work with to be the best Ensure accountability at all levels Make sound decisions at all times Qualifications / Experience: Must have 6-12 months experience in sales/customer service Basic computer skills Certifications / Educational Level: High School Diploma or GED required Bachelor's Degree in Business Administration or Exercise Science is preferred Personal Training Certification is preferred Physical Requirements: This job duty often requires the employee to regularly stand for up to 8 hours, walk, kneel, reach with hands and arms, and effectively communicate. Employee must occasionally lift and/or move up to 50 pounds. Work Environment: Employee may be regularly exposed to moving mechanical parts while performing duties of this job Employee may be exposed to higher volume levels of noise while in this environment Compensation: Base hourly rate: $17.00 - $20.00 Opportunity to earn monthly incentive bonuses up to $500 based on specified KPIs This job description intends to describe the general nature and level of work being performed by the people assigned to this job. It is not intended to include all duties and responsibilities. The order in which duties and responsibilities are listed is not significant. Compensation details: 17-20 Hourly Wage PIeade86b57a04-5059

We are hiring for CNC Operators for 2nd or 3rd shift - hours flexible SUMMARY: To process various products on a variety of CNC equipment and/or cells. ESSENTIAL DUTIES AND RESPONSIBILITIES: RESPONSIBILITIES include the following. Set up, adjust and operate a wide variety of numerically controlled machines and or cells, to perform rough and finish operations on a wide variety of casting, forgings and parts of copper, aluminum, steel graphite and other ferrous or non-ferrous metals and alloys. Work from programs, operational data and set up instructions. Manually perform deburring operations during cycle by hand sanding, belt sanding or operate single drill press and cleaning equipment to perform secondary operations. Use other hand tools, as necessary to maintain required quality. Will assist in training when needed. Other duties may be assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Associate's degree (A. A.) or equivalent from two-year college or technical school; or three to five years related experience and/or training;. or equivalent combination of education and experience. MATHEMATICAL and/or COMPUTER SKILLS: Ability to calculate figures and amounts such as proportions, percentages, area, and circumference. Ability to apply concepts of basic algebra and geometry. Knowledge of computer operation and related software required. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS: Operate fork lift truck (will be licensed in accordance with OSHA power industrial truck operator requirements.) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and or move up to 10 lbs. and occasionally lift and/or move up to 100 lbs. with the use of jib cranes and other moving and lifting devices. While performing the duties of this job, the employee is regularly required to stand and reach with hands and arms. The employee frequently is required to sit and use hands to finger, handle, or feel. The employee is occasionally required to walk; stoop, kneel, crouch, or crawl; and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. It is the employee's responsibility to properly utilize all required safety equipment and apparel at all times. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to loud continuous noise and vibration. The noise level in the work environment is usually moderate. OTHER DUTIES AND RESPONSIBILITIES: Detect quantity discrepancies, defective material, unusual conditions or operating difficulties and report to proper supervision. Will complete data transactions where necessary. Perform changing lubrication, cleaning and maintenance of equipment when necessary. Will maintain a clean and orderly work area at all times. A working knowledge of all job related Quality Management System operating procedures and work instructions is required. In addition to a great pay rate, we offer 2 weeks of Paid Vacation after 6 months of employment, 11 Paid Holidays (1 that you get to pick!), 16 hours of personal paid time for those days you need to schedule time off during working hours, Health, Vision and Dental Insurances, Company Paid Life, Short and Long Term Disability, 401k, and Profit Sharing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances as well as a physical. Electric Materials Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Compensation details: 26.12-28.39 Hourly Wage PIb78bfce0780a-6879

Summary The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications • Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). • Must be able to read and understand blueprints, specifications and routings • Ability to operate, adjust offsets; setup experience preferred, but not necessary • Ability to edit programs, fanuc controls, G code and M code programming • Requires mathematical skills that require the ability to add, subtract, multiply, and divide. • Must perform metric conversions. • Requires good oral and written communication skills in order to interact with employees. • Ability to true in jaws • Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience • Ability to work in a fast-paced environment. • Ability to communicate with all levels of the organization. • Ability to multi-task, establish priorities, set aggressive goals and achieve them. • Must be open to work overtime, as necessary. • 2 axis or 4 axis/live tooling • Ability to adjust taper on the OD/ID/face • Experience with tail stock and steady rests • Able to check pin size over threads • Knowledge of bore gages • Able to add extra passes to OD/bore/face if necessary • Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases "occasionally," "regularly," and "frequently" correspond to the following definitions: "Occasionally" means up to 1/3 of working time, "regularly" means between 1/3 and 2/3 of working time, and "frequently" means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time PIebcfc-8125

Reports to: Production Manager Location: Maple Grove, MN Position Summary: The technical services group is responsible for the assembly, integration, testing, installation, maintenance, training and support of the Avonix industrial x-ray imaging systems. Area of responsibilities are divided into levels. Levels 1, 2, and 3 primarily focus on factory production. Level 4 supports final production testing and focuses on installation, maintenance and customer support. Areas of Responsibility - Level 2: Will include, but not limited to the following: Assembly of mechanical and electrical subcomponents. Integration of subcomponents Machine build. Electrical wiring and terminations. Quality inspections. Basic machine startup and trouble shooting. PLC program loading, testing and trouble shooting. Motion controller programming, testing and trouble shooting. Assist with system installations. Approximate 90% factory production work / 10% field installations. Other duties as assigned. Required Knowledge, Skills, and Abilities: Alignment with the Avonix ACE core values. Basic knowledge of general mechanical assembly. Basic knowledge of general electrical assembly and circuits. Average computer skills. Basic understanding of PLC programming or the ability to learn and master the skill. Basic understanding of motion programming or the ability to learn and master the skill Ability to effectively communicate with Avonix employees, customers and management in a professional manner. Ability to provide technical solutions with a high degree of professionalism. Self-motivated, well organized and attention to detail. Strong mechanical and electrical aptitude with a strong desire to learn and succeed. Education and Experience: Two years' experience in related assembly or machine build technology. Certificates, License, Registrations: US Citizen, Green Card holder or equivalent. Compensation details: 24-30 Hourly Wage PI2fc3e51d313c-9873

Overview: Parker and Sons is currently seeking HVAC Sales Technicians in Tucson, AZ to join our team comprised of creative and energetic employees, who are dedicated to delivering the best customer service experience every day. Our Sales Technicians are responsible to diagnose all aspects of the HVAC system, give customers options and pricing of repairs, order parts for install purposes and collect payment upon completion while ensuring quality work is completed to all local and national codes. A proven history of excellent customer service, and a strong attention to following up with loyal customers is highly encouraged. WE ARE BUSY ALL YEAR ROUND - Earning Potential $100,000 - $200,000 + per year (average), PLUS industry leading benefits, PTO, 6 Paid Holidays per year + get paid to take your birthday off, 401(k) with Company match and so much more! What's In It For Me? Market Value Compensation ($100k+) Rewarding Commissions Structure! Robust PTO Plan Health, Vision and Dental plans for you and your family to choose from 401K Retirement Plan with company match Life Insurance, Short-Term and Long-Term Disability Special Program Options: FSA, EAP, Legal Services, and Identity Theft Continuous Training for your Professional Development Working in a dynamic, collaborative, and fun environment Responsibilities: What Wil I Do? Successfully perform routine maintenance on residential heating and air conditioning systems Operate a variety of hand and power tools to inspect repair, and conduct maintenance on furnaces, condensers, and compressors Build client relationships by providing outstanding service through strong communication and customer service skills Educate your clients on their systems and maintenance requirements Identify opportunities for clients to improve their home comfort systems through product overview Document service performed and recommendations made by completing applicable forms, reports, logs and/or records Complete all tasks in accordance with quality and safety standards Qualifications: Do I have What it Takes? 3+ years of experience in maintenance, diagnosing & troubleshooting, and correcting diverse HVAC system issues Mechanical aptitude Great customer service skills Excellent interpersonal and customer service skills with a strong desire to exceed customer expectations Results driven in a high-energy environment Attention to detail Must be able to follow directions and work independently Experience with Service Titan a plus! Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.

Cumberland Farms is one of the fastest-growing convenience retailers in the United States, committed to becoming America's 'one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our US headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Take home vehicle All tools provided Work-life balance On-call stipends Reasonable OT expectations Training & 3 year pay raises for entry level / inexperienced technicians Competitive wages Work today, get paid tomorrow through our earned wage access program Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: The General Maintenance Technician is responsible for performing a variety of maintenance tasks to ensure the safety, functionality, and appearance of facilities and equipment. Key responsibilities include troubleshooting, repairs, and preventive maintenance in areas such as plumbing, electrical, HVAC, carpentry, and general building systems. Responsibilities: 1. Troubleshoot and independently repair building systems, including plumbing, electrical, HVAC, and general mechanical components. 2. Perform preventive maintenance tasks on complex systems and equipment to ensure optimal performance and longevity. 3. Assist in training and mentoring entry-level technicians by providing guidance on maintenance tasks and best practices. 4. Lead smaller maintenance projects, ensuring timely completion and adherence to quality standards. 5. Collaborate with vendors or contractors to coordinate repairs or installations, verifying work complies with company and industry standards. 6. Maintain an organized inventory of tools, replacement parts, and vehicle supplies, ensuring adequate stock for ongoing maintenance needs. 7. Assist with equipment upgrades or replacements and coordinate ordering of necessary parts or tools. 8. Conduct routine maintenance and inspections on the service vehicle, ensuring compliance with scheduled upkeep and company standards. 9. Adhere to workplace safety protocols, company policies, and industry regulations (e.g., OSHA, safety codes, building codes) while completing tasks. 10. Identify and promptly report safety hazards or compliance issues to the maintenance supervisor. 11. Perform other duties as assigned by the management team to support departmental objectives. Working Relationships: Work directly with Department teammates. Frequent communication with other departments or teams, and External Vendors. Minimum Education: High School or GED Preferred Education: Trade and Technical schools' certificate/diploma Minimum Experience: 3-5 years of related experience Preferred Experience: 5-7 years of related experience. Proficient knowledge of building systems, including HVAC, electrical, plumbing, mechanical, and safety systems Licenses/Certifications: Applicable Trade Licensure; Plumbing, Electrical, Carpentry Soft Skills: Communication Skills - Clearly convey information, listen actively, and ensure mutual understanding Teamwork & Collaboration - Working effectively with others to achieve common goals Problem-solving - Use critical thinking to analyze situations and implement effective solutions Adaptability - Stay flexible and open to change in a dynamic work environment Time Management - Prioritize tasks, meeting deadlines, and managing time efficiently Other Requirements: Travel: Travel is a must; you must be able to drive for extended periods as needed A company vehicle is provided; they must maintain a clean driving record Hours & Conditions: Monday-Friday, 40 hours minimum, with participation in an on-call rotation, including holiday coverage Physical Requirements: Must be able to work safely in confined spaces as required by the role Ability to regularly lift up to 10 pounds, frequently lift up to 25 pounds, and occasionally lift up to 80 pounds, using proper lifting techniques and equipment as needed Must be able to stand or walk for up to 8 hours per day Ability to perform physical tasks such as reaching overhead, bending, squatting, twisting, grasping, gripping, and performing repetitive movements Comfortable working in environments with varying temperatures, including cold and hot conditions, as required by the role The work environment usually has moderate noise levels typical of industrial or operational settings At Cumberland Farms, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced corporate environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement. In the spirit of pay transparency, we're sharing the base salary range for this position. Final pay within this range will be based on your skills, experience, and qualifications. Base pay represents just one part of our total rewards approach. We're proud to offer a variety of financial and non-financial benefits that invest in your overall growth, well-being, and career journey.

We're seeking skilled Heavy Equipment Operators for exciting projects in select U.S cities. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $30 - $36 per hour Benefits: Paid Time Off Medical Retirement Here's what Skillit needs from you: Past experience in construction equipment operator jobs or a related supporting industry. Past experience in operating different machinery used in construction, earthmoving or excavation. A valid commercial driver's license (CDL) or heavy equipment operator certificate is preferred for the job. Strong attention to detail, interpersonal skills, mechanical aptitude and the ability to follow safety protocols. Physical stamina to handle demanding job site conditions and long shifts. Ability to read, write and communicate in English. Understanding of GPS equipment and operations. Here's what you'll be doing: Operating heavy equipment such as bulldozers, graders, backhoes, compactors, excavators, graders, haul trucks and cranes to move earth, dig, load, haul and spread material. Ensuring safe equipment operation by conducting pre-use checks and regular maintenance inspections. Following project blueprints, site plans, and safety procedures to maintain efficient work. Coordinating with site managers, engineers, and other members of the construction staff to maintain workflow and project timelines. Adherence to all safety protocols and regulations to minimize occupational risks at the workplace. May require assisting with heavy physical activity (lifting/pushing/pulling objects weighing over 60 lbs) Operate machinery in varied weather conditions (wet, humid, hot, exposure to fumes/ dust/ vibrations)

Description: Position Summary: Install and perform preventative maintenance on electrical equipment, and participate in facilities and maintenance department activities and projects. Essential Duties and Responsibilities include the following, other duties may be assigned: Promote working in a safe manner including completing JSA's and developing safe work plans for hazardous situational work, establishing designated work zones with posted signage, communicating hazards adequately to nearby employees, utilizing proper PPE, initiating stop-work practices in unsafe situations, reporting incidents and injuries promptly, and confronting unsafe acts and situations related to contractor work. Responsible for planning, assembling, installation, maintenance and testing of electrical equipment and wiring systems in an industrial setting, including AC/DC voltages, single and 3-phase, and wireless equipment Calibrate, install, and maintain transmitters, transducers, and other sensing equipment Make recommendations for the improvement of the operation of existing electrical systems and designs/layouts for future electrical systems including researching, developing plans, and submitting purchasing requests Perform PM's, troubleshooting, repairs, adjustments, and installations to industrial electrical systems including electrical components of mechanical systems, for systems up to 600 VAC, and for control systems up to 50 VDC, motor and motor controls, HVAC, lighting, access controls, cameras, and other equipment. This will require weekly and monthly inspections of equipment and good record keeping ability Assist in on-the-job training of apprentice electricians, technicians, and uphold RECARO expectations of contractors Adhere to the RECARO Lock out/Tag out program, work with Arc Flash equipment, and other OSHA requirements and standards Participate in ariel work, overhead lifting activities, loading and unloading of equipment, and other setup and relocation of heavy equipment or objects Light plumbing, fabricating, painting, housekeeping, groundskeeping, facilities inspection overhead doors repairs, events setup and teardown, inclement weather preparations, assisting other tradesman and emergency repairs Promoted good housekeeping including adherence to Bloodborne Pathogens standards and maintain an organized work area Coordinate with external vendors Maintain compliance with Federal and State Environmental regulations and agencies within RECARO guidelines Operate forklift, scissor/boom man lifts, company vehicles and other necessary equipment to perform job duties Able to work periodic weekends and evenings to accomplish certain tasks in non-production hours to minimize the impact to production Motivated self-starter who can manage tasks and projects and make decisions, and is also willing to be apart of a high performing team Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Possess Journeyman Electrical license At least 5 years Journeyman Electrician experience, Industrial Electrical experience preferred Must be able to use multi-meters, meggar, amp probe, thermal imaging devices and other instruments used in troubleshooting electrical equipment Basic knowledge of National Electrical Code High school diploma or equivalent At least 5 years experience in some type of maintenance support in manufacturing environment Ability to remain flexible in a dynamic business environment Ability to read/comprehend electrical schematics and technical information Work effectively as a team member Prioritize and complete multiple tasks and responsibilities Certificates and Licenses: Journeyman Electrical License Valid Drivers License PI552ee8d101ae-7952

Field Service Technician II US-MI-Novi Job ID: 33866 Type: Full-Time # of Openings: 1 Category: Field Service MI - Novi (Detroit) About the Role Spotting a solution and fixing a problem is a tremendous technical skillset. It requires diligence, determination, and a knack for knowledge. Does this sound like you? If so, Canon USA, an innovator of technology, solutions, and services, wants to meet you. We're ready to bring aboard individuals who strive for excellence in operational, maintenance, and networking support to help our valued customers with basic technical expertise of Canon-supports products. Your Impact We're actively seeking an individual to: Diagnose basic mechanical, software, network, and system failures using established procedures. Service and repair designated equipment to Canon standards and specifications. Maintain working knowledge and aptitude of multiple product groups. This includes basic aspects of troubleshooting and diagnostics. Meet and exceed customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance. Properly maintain all technical information, Field Service Reports, Expense Reports, and Canon property assigned. Maintain all technical information and Canon property assigned and provide direction to less experienced technicians. Provide the solutions of escalated technical and/or customer service-related problem areas for any territory requested. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We're looking for a dedicated individual with: HS Diploma, GED, or equivalent experience required, plus 1 to 2 years of related experience. A basic understanding of internet environments and the ability to complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class. The ability to travel (valid driver's license and acceptable driving record necessary) Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). We are providing the anticipated hourly rate for this role: $21.50 to 31.74 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIb17a7b44dfaa-3265

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We're proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Performs all work in accordance with established safety procedures. Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. Assists in the repair and adjustment of equipment. Washes vehicles and equipment. Conducts safety checks on vehicles. Assists with service calls for breakdowns. Perform other maintenance related work as required. Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications 3-5+ years' experience as class A or B mechanic Computer diagnostic experience is required Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus Trade school or similar training is a plus Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.64/Hr. Salary Range Maximum: USD $32.64/Hr.