Description: Laboratory Technologist (I, II, III) at Mosaic Diagnostics Department: Laboratory Reports To: Laboratory Operations Manager Prepared Date: 7/16/2025 FLSA Status: Non-exempt Summary of position: The Laboratory Technologist- The Laboratory Technologist performs medical laboratory tests, procedures, and analyses to provide data used by physicians to diagnose, treat, and promote health and wellness. The selected candidate will be responsible for performing all facets of testing including preparing calibrators, quality controls, and samples for analysis. The candidate will prepare chemical reagents needed for testing and perform maintenance of instrumentation. This position requires strong analytical reasoning, analytical instrument operating experience, and excellent troubleshooting capabilities in a fast-paced clinical laboratory environment. Duties/Responsibilities: Level I - Minimum Perform laboratory assays in accordance with Mosaic DX standard operating procedures Operate, calibrate and maintain all laboratory equipment and instruments according to standard operating procedures to ensure quality results Maintain adequate inventory of supplies, reagents and materials Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient samples Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and maintenance performed Be capable of identifying problems and patterns that may adversely affect test performance or reporting of test results. Analyze chromatographic and mass spectral data generated by GCMS and/or LCMS instrumentation Analyze test results and import into the LIMS/LIS systems for patient reporting Prepare chemical reagents Perform daily maintenance of analytical instruments Perform preventative maintenance on instruments and equipment per established schedule Successfully operate all required instrumentation including but not limited to fume hoods, centrifuges, rotators, GCMS, LCMS, Immunology Successfully and accurately mix solutions Successfully and accurately pipette solutions and specimens Manage day to day workflow within the department and/or per assigned bench Ability to meet and maintain turnaround time requirements of patient testing Ability to clearly document in all applicable logs, documents and systems for traceability Review and suggest edits to Standard Operating Procedures Follow all CLIA regulatory requirements Clearly and professionally communicate with all staff at Mosaic Diagnostics Check email daily and respond as needed by following normal business practices Accept or reject test results in accordance with standard operating procedures Document remedial action, troubleshooting, quality assurance activities and instrument maintenance Adhere to established processing timelines Adhere to all quality and safety standards Other duties as assigned by management Level II - Fully meets the responsibilities of Level I plus the following: General knowledge of Standard Operating Procedure writing, assay theory, and instrumentation Perform general troubleshooting for instruments and assays Perform orientation and training to new employees on all applicable instruments and equipment within the test system Evaluate and document testing personnel training Assist and perform new assay validation Assist and manage special projects as assigned Able and willing to support other departments Meet all CLIA Requirements Participate on special project teams as requested by supervisory staff Other duties as assigned by management Level III - Fully meets the responsibilities of Level II plus the following: Train Staff on advanced troubleshooting skills for instrumentation and assays Ability to assist staff with questions and be a subject matter exert Participate in advanced troubleshooting activities in conjunction with Technical Supervisor Cross-trained in multiple assays or processes Able and willing to support other departments Possess advanced knowledge of test systems or instruments Volunteer to serve on various committees and panels to the benefit of the laboratory or company in general (e.g. Safety Committee) Performs training and Qualified Personnel responsibilities as assigned In absence of team lead or management, if needed, adjust staffing according to volume and workflow. Required Skills/Abilities: Level I - Minimum Bachelor's degree in a biology science, a chemistry science or medical technology from a four-year college or university Minimum of 6 hours of biology credits, 6 hours of chemistry credits and 12 additional science credits GCMS or LCMS: 1 year (Preferred) Laboratory experience: 1 year (Preferred) Willing to work with potentially infectious human blood and body fluids Ability to work with automated and manual platforms Must possess skills required for aseptic techniques Intermediate level of proficiency with PC based software programs Demonstrates a high level of integrity and honesty in performing tests, documenting test results and maintaining patient, client, employee and laboratory business confidentiality Excellent verbal & written communication skills Analytical judgment, problem solving skills, accuracy and strong detail oriented Level II - Fully meets the qualifications of Level I plus the following: Minimum of 2 years of laboratory experience as a Laboratory Technologist I. Ability to move between tasks throughout the day to maintain workflow Must be familiar with lab statistical analysis Experience and proficient user of Microsoft office products LIMS/LIS experience with documentation of laboratory data Ability to critically think and troubleshoot High attention to detail Level III - Fully meets the qualifications of Level II plus the following: Minimum of 6 years of laboratory experience Possess the skillset to be a trainer and Qualified Personnel Possess advanced knowledge and troubleshooting capability Has demonstrated achievement in advancing laboratory improvements, including participation in committees, panels, process improvement teams, or other related activities Ability and willingness to train others Requirements: Physical Requirements: Physical dexterity sufficient to use hands, arms, and shoulders repetitively to operate a keyboard and other office equipment, use a telephone, access file cabinets and other items stored at various levels, including overhead Ability to speak and hear well enough to communicate clearly and understandably with sufficient volume to ensure an accurate exchange of information in normal conversational distance, over the telephone, and in a group setting Ability to stand for extended periods of time as necessary in the laboratory (4 or more hours) Ability to lift and move items weighing up to 40 pounds Physical dexterity sufficient to move body frequently around laboratory equipment and instrumentation Ability to continuously operate a personal computer for extended periods of time (4 or more hours) Mental acuity sufficient to collect and interpret data, evaluate, reason, define problems, establish facts, draw valid conclusions, make valid judgments and decisions The essential physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Compensation details: 24-34 Hourly Wage PI8675e92f29e1-5324
03/20/2026
Full time
Description: Laboratory Technologist (I, II, III) at Mosaic Diagnostics Department: Laboratory Reports To: Laboratory Operations Manager Prepared Date: 7/16/2025 FLSA Status: Non-exempt Summary of position: The Laboratory Technologist- The Laboratory Technologist performs medical laboratory tests, procedures, and analyses to provide data used by physicians to diagnose, treat, and promote health and wellness. The selected candidate will be responsible for performing all facets of testing including preparing calibrators, quality controls, and samples for analysis. The candidate will prepare chemical reagents needed for testing and perform maintenance of instrumentation. This position requires strong analytical reasoning, analytical instrument operating experience, and excellent troubleshooting capabilities in a fast-paced clinical laboratory environment. Duties/Responsibilities: Level I - Minimum Perform laboratory assays in accordance with Mosaic DX standard operating procedures Operate, calibrate and maintain all laboratory equipment and instruments according to standard operating procedures to ensure quality results Maintain adequate inventory of supplies, reagents and materials Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient samples Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and maintenance performed Be capable of identifying problems and patterns that may adversely affect test performance or reporting of test results. Analyze chromatographic and mass spectral data generated by GCMS and/or LCMS instrumentation Analyze test results and import into the LIMS/LIS systems for patient reporting Prepare chemical reagents Perform daily maintenance of analytical instruments Perform preventative maintenance on instruments and equipment per established schedule Successfully operate all required instrumentation including but not limited to fume hoods, centrifuges, rotators, GCMS, LCMS, Immunology Successfully and accurately mix solutions Successfully and accurately pipette solutions and specimens Manage day to day workflow within the department and/or per assigned bench Ability to meet and maintain turnaround time requirements of patient testing Ability to clearly document in all applicable logs, documents and systems for traceability Review and suggest edits to Standard Operating Procedures Follow all CLIA regulatory requirements Clearly and professionally communicate with all staff at Mosaic Diagnostics Check email daily and respond as needed by following normal business practices Accept or reject test results in accordance with standard operating procedures Document remedial action, troubleshooting, quality assurance activities and instrument maintenance Adhere to established processing timelines Adhere to all quality and safety standards Other duties as assigned by management Level II - Fully meets the responsibilities of Level I plus the following: General knowledge of Standard Operating Procedure writing, assay theory, and instrumentation Perform general troubleshooting for instruments and assays Perform orientation and training to new employees on all applicable instruments and equipment within the test system Evaluate and document testing personnel training Assist and perform new assay validation Assist and manage special projects as assigned Able and willing to support other departments Meet all CLIA Requirements Participate on special project teams as requested by supervisory staff Other duties as assigned by management Level III - Fully meets the responsibilities of Level II plus the following: Train Staff on advanced troubleshooting skills for instrumentation and assays Ability to assist staff with questions and be a subject matter exert Participate in advanced troubleshooting activities in conjunction with Technical Supervisor Cross-trained in multiple assays or processes Able and willing to support other departments Possess advanced knowledge of test systems or instruments Volunteer to serve on various committees and panels to the benefit of the laboratory or company in general (e.g. Safety Committee) Performs training and Qualified Personnel responsibilities as assigned In absence of team lead or management, if needed, adjust staffing according to volume and workflow. Required Skills/Abilities: Level I - Minimum Bachelor's degree in a biology science, a chemistry science or medical technology from a four-year college or university Minimum of 6 hours of biology credits, 6 hours of chemistry credits and 12 additional science credits GCMS or LCMS: 1 year (Preferred) Laboratory experience: 1 year (Preferred) Willing to work with potentially infectious human blood and body fluids Ability to work with automated and manual platforms Must possess skills required for aseptic techniques Intermediate level of proficiency with PC based software programs Demonstrates a high level of integrity and honesty in performing tests, documenting test results and maintaining patient, client, employee and laboratory business confidentiality Excellent verbal & written communication skills Analytical judgment, problem solving skills, accuracy and strong detail oriented Level II - Fully meets the qualifications of Level I plus the following: Minimum of 2 years of laboratory experience as a Laboratory Technologist I. Ability to move between tasks throughout the day to maintain workflow Must be familiar with lab statistical analysis Experience and proficient user of Microsoft office products LIMS/LIS experience with documentation of laboratory data Ability to critically think and troubleshoot High attention to detail Level III - Fully meets the qualifications of Level II plus the following: Minimum of 6 years of laboratory experience Possess the skillset to be a trainer and Qualified Personnel Possess advanced knowledge and troubleshooting capability Has demonstrated achievement in advancing laboratory improvements, including participation in committees, panels, process improvement teams, or other related activities Ability and willingness to train others Requirements: Physical Requirements: Physical dexterity sufficient to use hands, arms, and shoulders repetitively to operate a keyboard and other office equipment, use a telephone, access file cabinets and other items stored at various levels, including overhead Ability to speak and hear well enough to communicate clearly and understandably with sufficient volume to ensure an accurate exchange of information in normal conversational distance, over the telephone, and in a group setting Ability to stand for extended periods of time as necessary in the laboratory (4 or more hours) Ability to lift and move items weighing up to 40 pounds Physical dexterity sufficient to move body frequently around laboratory equipment and instrumentation Ability to continuously operate a personal computer for extended periods of time (4 or more hours) Mental acuity sufficient to collect and interpret data, evaluate, reason, define problems, establish facts, draw valid conclusions, make valid judgments and decisions The essential physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Compensation details: 24-34 Hourly Wage PI8675e92f29e1-5324
Equipment Maintenance III Department: Maintenance Division: Operations At Daniel Defense, Only the Best Build the Best Daniel Defense engineers and manufactures the world's finest weapon systems and accessories. Our mission to honor God and defend Freedom is accomplished by serving customers and providing top-quality solutions to our military, law enforcement, and civilian customers seeking premium firearms for home defense, hunting, and sport shooting. As the Equipment Maintenance III, you will be responsible for the functions outlined below: Essential Functions: Responsible for demonstrating commitment to and leadership of environmental health and safety principles, policies and procedures. Must be able to effectively perform Level II job functions. Conforms to and operates within the framework of all applicable operator work instructions, SOPs, quality, and safety procedures. Participates in required safety toolbox discussions and monthly meetings. Maintain proper housekeeping of work area; Keep all machines, tools, and equipment and work surfaces free of oil, grease, etc. Assist with the organization of, and performing daily maintenance tasks for, the machine tool coolant and scrap metals process Provide support in maintaining 6S signage and marking of equipment, walkways and other locational marking on shop floor. Maintain all manufacturing equipment and machines to include preventative maintenance. Maintain lighting, HVAC filters, painting, plumbing, signage, etc. of company facilities. Record and track maintenance schedules. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Perform routine and emergency/unscheduled repairs of CNC production equipment as needed. Overtime and off shift call in may be required. Install, maintain and repair complex machines and tools such as lathes, CNC machines, large special purpose machines, etc. Plan repair procedures, machine and fabricate parts, perform skilled fitting and aligning as required. Construct wooden or metal crates, frames, tables, etc. Work from complicated drawings, machine/equipment manuals and technical specifications. Use a variety of precision measuring instruments for exacting measurements. Work from general assignments and proceed with minimal supervision and directions. Demonstrates strong leadership skills and knowledge. Direct department with assigned tasks in Machine Shop Maintenance Supervisor's absence. Participates in the company's efforts to continuously improve in Safety, 6S, Quality, Delivery and Productivity. Expected to be a contributor to the company standards on high integrity, safety, fair and equitable treatment and a positive work environment Other responsibilities as deemed appropriate or necessary by management. Knowledge, Skills, and Abilities: High school diploma or general education degree (GED); 3+ years of prior maintenance experience or related experience and/or training; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Apprenticeship or equivalent training plus considerable experience is required to perform work. Advanced mechanical knowledge with the ability to service and repair pumps, motors, shafts, bearings and spindles. May be required to work varying shifts or weekends as needed. Advanced experience using power, pneumatic, hydraulic and hand tools. Advanced experience maintaining and repairing all equipment, to include CNC, servo motors, related controls wiring, programmable controllers, etc. Ability to operate forklifts, man lifts, hand and power tools. Has knowledge of commonly used concepts, practices and procedures within the field. Teamwork and the ability to cooperate and work proactively with others is a must. Intermediate understanding of manufacturing processes. Ability to prioritize responsibilities and work under deadlines and pressure. Proficient at isolating various forms of hazardous energy (electrical, hydraulic, pneumatic, etc.) and safely perform lockout/tag out procedures. Ability to work, interact and effectively communicate with all company officials, employees, vendors, customers, etc. Demonstrated ability to manage multiple projects simultaneously, set priorities, identify and address problems, meet deadlines, and stay within budget. Demonstrated ability to recognize and work in accordance with our Company Values. Physical Requirements: Must be able to lift and carry awkward items weighing up to 50 pounds. Requires intermittent standing, walking, sitting and bending throughout the workday. Must be able to work in a manufacturing environment, to include working in and around machinery, exposure to noise and chemicals, lights/lasers, etc. Must be able to wear appropriate Personal Protection Equipment as required by your position and/or Company policy. Daniel Defense is an EOE AA M/F/Vet/Disability employer and promotes a "Drug-Free Workplace." Note: The statements above are intended to describe the general nature and level of work being performed by those assigned to the job. This list is not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel in this job. Responsibilities are subject to change at the discretion of the employer and do not establish a contract of employment - Daniel Defense is an at-will employer. PI40aa25caa5-
03/20/2026
Full time
Equipment Maintenance III Department: Maintenance Division: Operations At Daniel Defense, Only the Best Build the Best Daniel Defense engineers and manufactures the world's finest weapon systems and accessories. Our mission to honor God and defend Freedom is accomplished by serving customers and providing top-quality solutions to our military, law enforcement, and civilian customers seeking premium firearms for home defense, hunting, and sport shooting. As the Equipment Maintenance III, you will be responsible for the functions outlined below: Essential Functions: Responsible for demonstrating commitment to and leadership of environmental health and safety principles, policies and procedures. Must be able to effectively perform Level II job functions. Conforms to and operates within the framework of all applicable operator work instructions, SOPs, quality, and safety procedures. Participates in required safety toolbox discussions and monthly meetings. Maintain proper housekeeping of work area; Keep all machines, tools, and equipment and work surfaces free of oil, grease, etc. Assist with the organization of, and performing daily maintenance tasks for, the machine tool coolant and scrap metals process Provide support in maintaining 6S signage and marking of equipment, walkways and other locational marking on shop floor. Maintain all manufacturing equipment and machines to include preventative maintenance. Maintain lighting, HVAC filters, painting, plumbing, signage, etc. of company facilities. Record and track maintenance schedules. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Perform routine and emergency/unscheduled repairs of CNC production equipment as needed. Overtime and off shift call in may be required. Install, maintain and repair complex machines and tools such as lathes, CNC machines, large special purpose machines, etc. Plan repair procedures, machine and fabricate parts, perform skilled fitting and aligning as required. Construct wooden or metal crates, frames, tables, etc. Work from complicated drawings, machine/equipment manuals and technical specifications. Use a variety of precision measuring instruments for exacting measurements. Work from general assignments and proceed with minimal supervision and directions. Demonstrates strong leadership skills and knowledge. Direct department with assigned tasks in Machine Shop Maintenance Supervisor's absence. Participates in the company's efforts to continuously improve in Safety, 6S, Quality, Delivery and Productivity. Expected to be a contributor to the company standards on high integrity, safety, fair and equitable treatment and a positive work environment Other responsibilities as deemed appropriate or necessary by management. Knowledge, Skills, and Abilities: High school diploma or general education degree (GED); 3+ years of prior maintenance experience or related experience and/or training; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Apprenticeship or equivalent training plus considerable experience is required to perform work. Advanced mechanical knowledge with the ability to service and repair pumps, motors, shafts, bearings and spindles. May be required to work varying shifts or weekends as needed. Advanced experience using power, pneumatic, hydraulic and hand tools. Advanced experience maintaining and repairing all equipment, to include CNC, servo motors, related controls wiring, programmable controllers, etc. Ability to operate forklifts, man lifts, hand and power tools. Has knowledge of commonly used concepts, practices and procedures within the field. Teamwork and the ability to cooperate and work proactively with others is a must. Intermediate understanding of manufacturing processes. Ability to prioritize responsibilities and work under deadlines and pressure. Proficient at isolating various forms of hazardous energy (electrical, hydraulic, pneumatic, etc.) and safely perform lockout/tag out procedures. Ability to work, interact and effectively communicate with all company officials, employees, vendors, customers, etc. Demonstrated ability to manage multiple projects simultaneously, set priorities, identify and address problems, meet deadlines, and stay within budget. Demonstrated ability to recognize and work in accordance with our Company Values. Physical Requirements: Must be able to lift and carry awkward items weighing up to 50 pounds. Requires intermittent standing, walking, sitting and bending throughout the workday. Must be able to work in a manufacturing environment, to include working in and around machinery, exposure to noise and chemicals, lights/lasers, etc. Must be able to wear appropriate Personal Protection Equipment as required by your position and/or Company policy. Daniel Defense is an EOE AA M/F/Vet/Disability employer and promotes a "Drug-Free Workplace." Note: The statements above are intended to describe the general nature and level of work being performed by those assigned to the job. This list is not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel in this job. Responsibilities are subject to change at the discretion of the employer and do not establish a contract of employment - Daniel Defense is an at-will employer. PI40aa25caa5-
HORST ENGINEERING & MANUFACTURING CO
East Hartford, Connecticut
Sets-up and operates CNC Swiss Machines to produce highly precision component parts that meet all quality standards. Must be able to work independently and provide training/guidance to others. This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate Swiss Turning machines (Citizen L20, A20, A32, M32, M32Y)Will work with blueprints, operation sheets, and other work instructions.Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance with quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized.Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 7 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Must be familiar with Fanuc and/or Mitsubishi Controls Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours. PIdedc5-
03/20/2026
Full time
Sets-up and operates CNC Swiss Machines to produce highly precision component parts that meet all quality standards. Must be able to work independently and provide training/guidance to others. This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate Swiss Turning machines (Citizen L20, A20, A32, M32, M32Y)Will work with blueprints, operation sheets, and other work instructions.Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance with quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized.Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 7 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Must be familiar with Fanuc and/or Mitsubishi Controls Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours. PIdedc5-
A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit The Maintenance Technician III is responsible for performing ongoing corrective, predictive and preventative maintenance for the process equipment within the assigned operating area. This position also could entail the execution of setup and changeover support for all process equipment used in various classified areas up to a Class 100 aseptic environment. This role requires the ability to perform mechanical and electrical troubleshooting to ensure optimal operation of the process equipment. The Maintenance Technician III will also perform basic mechanical training to Production Operators and serve as a resource to help implement continuous improvement projects. The Maintenance Technician III reports to a Supervisor, Maintenance. Job Responsibilities Complete emergency repair, rebuilding, changeover and inspection work on process related equipment. Install, inspect, test, adjust, repair and perform line turnarounds, changeovers, and preventative maintenance per established procedures in a timely and efficient manner. Troubleshoot the following Automation systems; PLCs, HMIs, SCADA. Ability to interpret diagrams, drawing, PLC code and other schematics. Complete documentation and required functions in the work order system to close out activities in compliance with cGMPs. Responsible for equipment and system performance through data monitoring within the assigned operating area. Use a variety of testing, tools, and measuring equipment in the efficient maintenance and troubleshooting of electronic, environmental monitoring, pneumatic, hydraulic, and mechanical line equipment. Provide training to operators for equipment set-up and for minor adjustments or repairs. Install new equipment and oversee equipment upgrades according to site SOPs. Perform 5S activities and maintain organization of operating areas. Perform work requirements in a responsible manner, in accordance with SOPs, cGMPs and established safety procedures in accordance with OSHA requirements and guidelines. Be familiar with "Material Safety Data Sheets" for area chemicals. Perform batch record and GMP documentation entries. Maintain records and/or logs as required in performance of job responsibilities. This will include mathematical computation where needed. Work with minimal supervision under the direction of the Maintenance Facilitator, Process Facilitator, Engineer, or other activity leads. Perform roles of Technician and Mechanical Technician as required to support daily PET activities. Utilize appropriate Problem Solving and Troubleshooting techniques to complete equipment repairs. Follow and maintain compliance with established MRO procedures and inventory control. Serve as a project resource to PET to assist in the follow up and timely implementation of projects and validation activities Responsible for maintaining Aseptic Processing and Gowning certifications as required to support assigned work areas. (Area Dependent) Perform cleaning and housekeeping activities for assigned areas as required to maintain a cGMP environment. Perform other similar and related responsibilities as assigned by area management. Some overtime will be required with prior notice to support business needs. Emergency overtime may be required with little notice to ensure operation of equipment within the manufacturing. Minimum Requirements: Experience in a regulated production environment, specifically responsible for equipment maintenance and performance Experience with some of following Automation systems; PLCs, HMIs, SCADA, Rockwell Inductive (Ignition) Aveva (Wonderware), Siemens, Emerson (GE) or B&R Must have the ability to effectively understand, read, write, communicate and follow instructions in the English language. Ability to lift and handle equipment change parts, tooling, and materials associated with equipment maintenance and repair. Proficient with Computerized Maintenance Management Systems such as Maximo or SAP. Preferred Background: High school graduate, vocational school graduate or equivalent Associates in Engineering or a related discipline or equivalent mechanical trade school graduate preferred Previous experience with automated equipment preferred Training in mechanics, hydraulics, electronics and testing equipment in electrical and/or mechanical troubleshooting Knowledge of data and materials maintenance systems such as SAP, KRONOS, or other MRP systems Experience with OEE, TPM, LEAN or other Continuous Improvement systems Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $38.00 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters. PIfa8e260a2e02-4435
03/19/2026
Full time
A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit The Maintenance Technician III is responsible for performing ongoing corrective, predictive and preventative maintenance for the process equipment within the assigned operating area. This position also could entail the execution of setup and changeover support for all process equipment used in various classified areas up to a Class 100 aseptic environment. This role requires the ability to perform mechanical and electrical troubleshooting to ensure optimal operation of the process equipment. The Maintenance Technician III will also perform basic mechanical training to Production Operators and serve as a resource to help implement continuous improvement projects. The Maintenance Technician III reports to a Supervisor, Maintenance. Job Responsibilities Complete emergency repair, rebuilding, changeover and inspection work on process related equipment. Install, inspect, test, adjust, repair and perform line turnarounds, changeovers, and preventative maintenance per established procedures in a timely and efficient manner. Troubleshoot the following Automation systems; PLCs, HMIs, SCADA. Ability to interpret diagrams, drawing, PLC code and other schematics. Complete documentation and required functions in the work order system to close out activities in compliance with cGMPs. Responsible for equipment and system performance through data monitoring within the assigned operating area. Use a variety of testing, tools, and measuring equipment in the efficient maintenance and troubleshooting of electronic, environmental monitoring, pneumatic, hydraulic, and mechanical line equipment. Provide training to operators for equipment set-up and for minor adjustments or repairs. Install new equipment and oversee equipment upgrades according to site SOPs. Perform 5S activities and maintain organization of operating areas. Perform work requirements in a responsible manner, in accordance with SOPs, cGMPs and established safety procedures in accordance with OSHA requirements and guidelines. Be familiar with "Material Safety Data Sheets" for area chemicals. Perform batch record and GMP documentation entries. Maintain records and/or logs as required in performance of job responsibilities. This will include mathematical computation where needed. Work with minimal supervision under the direction of the Maintenance Facilitator, Process Facilitator, Engineer, or other activity leads. Perform roles of Technician and Mechanical Technician as required to support daily PET activities. Utilize appropriate Problem Solving and Troubleshooting techniques to complete equipment repairs. Follow and maintain compliance with established MRO procedures and inventory control. Serve as a project resource to PET to assist in the follow up and timely implementation of projects and validation activities Responsible for maintaining Aseptic Processing and Gowning certifications as required to support assigned work areas. (Area Dependent) Perform cleaning and housekeeping activities for assigned areas as required to maintain a cGMP environment. Perform other similar and related responsibilities as assigned by area management. Some overtime will be required with prior notice to support business needs. Emergency overtime may be required with little notice to ensure operation of equipment within the manufacturing. Minimum Requirements: Experience in a regulated production environment, specifically responsible for equipment maintenance and performance Experience with some of following Automation systems; PLCs, HMIs, SCADA, Rockwell Inductive (Ignition) Aveva (Wonderware), Siemens, Emerson (GE) or B&R Must have the ability to effectively understand, read, write, communicate and follow instructions in the English language. Ability to lift and handle equipment change parts, tooling, and materials associated with equipment maintenance and repair. Proficient with Computerized Maintenance Management Systems such as Maximo or SAP. Preferred Background: High school graduate, vocational school graduate or equivalent Associates in Engineering or a related discipline or equivalent mechanical trade school graduate preferred Previous experience with automated equipment preferred Training in mechanics, hydraulics, electronics and testing equipment in electrical and/or mechanical troubleshooting Knowledge of data and materials maintenance systems such as SAP, KRONOS, or other MRP systems Experience with OEE, TPM, LEAN or other Continuous Improvement systems Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $38.00 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters. PIfa8e260a2e02-4435
HORST ENGINEERING & MANUFACTURING CO
East Hartford, Connecticut
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards. Ability and willingness to train others. Can work independently and lead a project. This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pm This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)Will work with blueprints, operation sheets, and other work instructions.Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance to quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours. PIe4204bd7e1eb-6932
03/16/2026
Full time
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards. Ability and willingness to train others. Can work independently and lead a project. This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pm This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)Will work with blueprints, operation sheets, and other work instructions.Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance to quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours. PIe4204bd7e1eb-6932
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/12/2026
Full time
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/12/2026
Full time
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/12/2026
Full time
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/12/2026
Full time
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/10/2026
Full time
Maintenance Mechanic III (Journeyman Plumber Experience) - Good Samaritan Hospital Start time flexible between 6:00 a.m.-8:00 a.m.; 8 hour shifts Under the direction of the Supervisor, this position is responsible for the expert level maintenance and repair of hospital buildings, facilities, and equipment. The role requires journeyman level plumbing expertise as well as working knowledge and reasonable proficiency in additional building trades. The Maintenance Mechanic III provides technical guidance to helpers, workers, and mechanics on maintenance operations and assists the Supervisor in identifying optimal methods for maintenance and system operations. This position requires the ability to work independently with minimal supervision, including determining maintenance needs, establishing priorities, and responding appropriately. A strong customer service orientation is essential. Location: Good Samaritan Hospital 375 Dixmyth Ave, Cincinnati, OH 45220 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
At Bethesda North Hospital, every team member plays a vital role in supporting exceptional patient care. As a Maintenance Mechanic, your work ensures that our campus remains safe, reliable, and fully operational for the patients, families, and caregivers who depend on us every day. Location: Bethesda North Hospital, 10500 Montgomery Rd, Montgomery, OH 45242 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Preferred qualifications: Working knowledge of HVAC systems Experience with boilers and air compressors Familiarity with steam systems Understanding of chillers and cooling towers Background in commercial building maintenance Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community
03/06/2026
Full time
At Bethesda North Hospital, every team member plays a vital role in supporting exceptional patient care. As a Maintenance Mechanic, your work ensures that our campus remains safe, reliable, and fully operational for the patients, families, and caregivers who depend on us every day. Location: Bethesda North Hospital, 10500 Montgomery Rd, Montgomery, OH 45242 Schedule: Full time day shift Incentives & Benefits: We offer competitive shift differentials, opportunities for professional growth, and a comprehensive benefits package that may include medical, dental, vision, paid time off, retirement savings plans, and tuition reimbursement. PRN positions not eligible for TriHealth benefits Minimum Job Requirements: Associate's Degree (Required) 3 - 4 years experience in a related field (Required) Mechanical / electrical background including familiarity with repair and maintenance tools and terms Ability to read and interpret blueprints and technical manuals Equivalent relevant experience is acceptable in lieu of minimum education. Preferred qualifications: Working knowledge of HVAC systems Experience with boilers and air compressors Familiarity with steam systems Understanding of chillers and cooling towers Background in commercial building maintenance Job Overview: Under the direction of the Supervisor, this position directly responsible for the maintenance and upkeep of the Hospital buildings, facilities and equipment at the "expert", "master craftsman", or "specialist" level in one of the building trades. Must be familiar with and reasonably proficient in the other trades. Provides technical direction/advice to helpers/workers/mechanics on maintenance operations. Assists Supervisor in determining optimal maintenance and operations methods. Must be able to work with little or no direct supervision as employee is solely responsible for ascertaining what maintenance or repair is required, determining its priority and responding appropriately. Customer Service orientation is mandatory. Job Responsibilities: Completes paperwork associated with Work Orders and turns in on time. Files Incidents Reports and notes critical turnover in Maintenance Redbook. Completes work orders, scheduled and un-scheduled, within the time constraints allowed for each type of work order Maintains a neat, organized work place, including but not limited to assigned mechanical and electrical rooms. Maintains proper parts level inventories in his/her assigned areas. Appears professional in dress and appearance in work area. Uses proper techniques and personal protective equipment so as to perform work in a safe efficient manner. Uses technical ability to complete work request, scheduled and un-scheduled in a professional, thorough manner. Working Conditions: Bending - Occasionally Climbing - Occasionally Concentrating - Frequently Continuous Learning - Frequently Hearing: Conversation - Consistently Hearing: Other Sounds - Frequently Interpersonal Communication - Frequently Kneeling - Occasionally Lifting Lifting 50+ Lbs. - Frequently Lifting Pulling - Consistently Pushing - Consistently Reaching - Consistently Reading - Frequently Sitting - Occasionally Standing - Consistently Stooping - Frequently Talking - Consistently Thinking/Reasoning - Frequently Use of Hands - Frequently Color Vision - Occasionally Visual Acuity: Far - Frequently Visual Acuity: Near - Consistently Walking - Consistently TriHealth SERVE Standards and ALWAYS Behaviors At TriHealth, we believe there is no responsibility more important than to SERVE our patients, our communities, and our fellow team members. To achieve our vision and mission, ALL TriHealth team members are expected to demonstrate and live the following: Serve: ALWAYS • Welcome everyone by making eye contact, greeting with a smile, and saying "hello" • Acknowledge when patients/guests are lost and escort them to their destination or find someone who can assist • Refrain from using cell phones for personal reasons in public spaces or patient care areas Excel: ALWAYS • Recognize and take personal responsibility to address and recover from service breakdowns when a customer's expectations have not been met • Offer patients and guests priority when waiting (lines, elevators) • Work on improving quality, safety, and service Respect: ALWAYS • Respect cultural and spiritual differences and honor individual preferences. • Respect everyone's opinion and contribution, regardless of title/role. • Speak positively about my team members and other departments in front of patients and guests. Value: ALWAYS • Value the time of others by striving to be on time, prepared and actively participating. • Pick up trash, ensuring the physical environment is clean and safe. • Be a good steward of our resources, using supplies and equipment efficiently and effectively, and will look for ways to avoid waste. Engage: ALWAYS • Acknowledge wins and frequently thank team members and others for contributions. • Show courtesy and compassion with customers, team members and the community