BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting career opportunity as an LNG Plant Control Systems Technician/Senior LNG Plant Control Systems Technician located at our Cove Point Facility located in Lusby, MD. RESPONSIBILITIES The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) reports directly to the DCS Supervisor and is a member of a multi-disciplined crew responsible for the SAFE Operation and Maintenance of a liquefied natural gas (LNG) import /export and re-gasification terminal including LNG process systems infrastructure controls, emergency response, electrical and emergency power generation, turbines, auxiliary control support systems, PLC, and Distributed Control System (DCS). Dedication sensitivity to safety issues and compliance with policies and procedures is essential for the safe reliable and efficient operation of the terminal. The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) specific job responsibilities include the following: The successful candidate must be willing to work in an industrial environment, including time spent performing DCS technician engineering room and field work including the inspection, testing, service, repair, configuration, calibration, and installation of automated control systems, Human Machine Interface (HMI) consoles, network hardware, and related components that would be found in industrial facilities such as a power station, chemical plant, manufacturing facility, petrochemical NGL, cryogenic natural gas processing or hydrocarbon facility. Work on complex and detailed control systems, troubleshoots and repairs control and network systems, and replaces component parts as required. Under the supervision or direction of an experienced Senior or Lead, maintain the DCS network hardware and configuration, perform changes to existing Emerson DeltaV logic and HMI graphics, GE MK VIe or Woodward Combustion/Steam Turbine Controls, Allen Bradley and other local Programmable Logic Controls (PLCs) and other duties as assigned. Performs periodic backup on all DCS / PLC controllers, network and supporting computers. Submit drawings and configuration changes made on the DCS, network, and field instrumentation following the site's modification and MOC process. Assist in training and guiding less experienced Technicians and addressing Operations control system concerns. Obtain a basic understanding of all plant DCS, Safety Instrumented System (SIS), PLC, LNG regasification and liquefaction processes and control systems. Understands control systems for plant utilities, including air, water, power generation, and nitrogen Monitors or assists in the loading/unloading of LNG ships. May perform the duties of an LNG Technician (DCS) in a rotational shift environment, including holidays, weekends, and nights. Participates in training on environmental safety, operations and security procedures. Recognizes the safety and environmental consequences of actions taken. Maintains the highest levels of environmental and safety compliance. Performs all duties applying safety protocols and adhering to regulatory mandates. Reviews and analyzes alarm history to improve operational efficiencies and eliminate nuisance alarms Assists in the development, implementation, and execution of OT cybersecurity policies and procedures. Manages updates on all cybersecurity OT compliance software used for asset inventory, whitelisting, intrusion detection, password vault, disaster recovery, and intrusion detection. Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Plant Control System Technician: 2+ years of related experience. Applied knowledge of automated control system instruments such as flow meters, pressure gauges, thermocouples, regulators and other industrial components Competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulation compliance systems. Ability to provide guidance and/or training to less experienced Technicians and Operators. Competent in workstation and server software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel Analytical and deductive reasoning skills, oral and written communication skills, technical writing skills, instrumentation skills, and mathematical skills. Ability to troubleshoot and solve equipment or process problems. Ability to conduct site inspections or walk downs, including working at heights. Ability to recommend changes to DCS, instrumentation drawing and configuration documentation. Sr Plant Control System Technician: A minimum of 5+ years direct experience with operations, instrumentation, DCS, PLC's and Computer systems. Applied knowledge of automated control instruments such as flow meters, pressure gauges, thermocouples, regulators, and other industrial components. Full competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulations and the associated control and data acquisition systems. Ability to provide guidance and/or training to Technicians and Operators. Competent in personal computer software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel. Strong analytical and deductive reasoning, oral and written communication, technical writing, and mathematical skills. Demonstrated ability to troubleshoot and solve DCS hardware and process control problems. Full ability to conduct site inspections or walk downs, including working at heights. Experience in commissioning medium to large scale industrial control installations Demonstrated ability to maintain documentation related to the DCS and instrumentation. Contribute to a team-centric work environment based on mutual respect and integrity. Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers. Education Degree or an equivalent combination of education and demonstrated related experience may be accepted in lieu of preferred level of education: Associate Preferred Discipline: Technical Studies Must have a valid TWIC card or proof of TWIC card application prior to employment. Other disciplines may be substituted for the preferred discipline(s) listed above. Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification Job Category LNG Operations Posting Date 2025-12-04 Apply Before 2026-02-12T04:59 00 Job Schedule Full time Locations 2100 Cove Point Rd, Lusby, MD, 20657, US Relocation Assistance Available for this position dependent upon eligibility requirements Business Cove Point LNG, LP Compensation details: 38.16-54.89 PI8ed4c1f1cfcf-6350
01/10/2026
Full time
BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting career opportunity as an LNG Plant Control Systems Technician/Senior LNG Plant Control Systems Technician located at our Cove Point Facility located in Lusby, MD. RESPONSIBILITIES The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) reports directly to the DCS Supervisor and is a member of a multi-disciplined crew responsible for the SAFE Operation and Maintenance of a liquefied natural gas (LNG) import /export and re-gasification terminal including LNG process systems infrastructure controls, emergency response, electrical and emergency power generation, turbines, auxiliary control support systems, PLC, and Distributed Control System (DCS). Dedication sensitivity to safety issues and compliance with policies and procedures is essential for the safe reliable and efficient operation of the terminal. The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) specific job responsibilities include the following: The successful candidate must be willing to work in an industrial environment, including time spent performing DCS technician engineering room and field work including the inspection, testing, service, repair, configuration, calibration, and installation of automated control systems, Human Machine Interface (HMI) consoles, network hardware, and related components that would be found in industrial facilities such as a power station, chemical plant, manufacturing facility, petrochemical NGL, cryogenic natural gas processing or hydrocarbon facility. Work on complex and detailed control systems, troubleshoots and repairs control and network systems, and replaces component parts as required. Under the supervision or direction of an experienced Senior or Lead, maintain the DCS network hardware and configuration, perform changes to existing Emerson DeltaV logic and HMI graphics, GE MK VIe or Woodward Combustion/Steam Turbine Controls, Allen Bradley and other local Programmable Logic Controls (PLCs) and other duties as assigned. Performs periodic backup on all DCS / PLC controllers, network and supporting computers. Submit drawings and configuration changes made on the DCS, network, and field instrumentation following the site's modification and MOC process. Assist in training and guiding less experienced Technicians and addressing Operations control system concerns. Obtain a basic understanding of all plant DCS, Safety Instrumented System (SIS), PLC, LNG regasification and liquefaction processes and control systems. Understands control systems for plant utilities, including air, water, power generation, and nitrogen Monitors or assists in the loading/unloading of LNG ships. May perform the duties of an LNG Technician (DCS) in a rotational shift environment, including holidays, weekends, and nights. Participates in training on environmental safety, operations and security procedures. Recognizes the safety and environmental consequences of actions taken. Maintains the highest levels of environmental and safety compliance. Performs all duties applying safety protocols and adhering to regulatory mandates. Reviews and analyzes alarm history to improve operational efficiencies and eliminate nuisance alarms Assists in the development, implementation, and execution of OT cybersecurity policies and procedures. Manages updates on all cybersecurity OT compliance software used for asset inventory, whitelisting, intrusion detection, password vault, disaster recovery, and intrusion detection. Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Plant Control System Technician: 2+ years of related experience. Applied knowledge of automated control system instruments such as flow meters, pressure gauges, thermocouples, regulators and other industrial components Competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulation compliance systems. Ability to provide guidance and/or training to less experienced Technicians and Operators. Competent in workstation and server software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel Analytical and deductive reasoning skills, oral and written communication skills, technical writing skills, instrumentation skills, and mathematical skills. Ability to troubleshoot and solve equipment or process problems. Ability to conduct site inspections or walk downs, including working at heights. Ability to recommend changes to DCS, instrumentation drawing and configuration documentation. Sr Plant Control System Technician: A minimum of 5+ years direct experience with operations, instrumentation, DCS, PLC's and Computer systems. Applied knowledge of automated control instruments such as flow meters, pressure gauges, thermocouples, regulators, and other industrial components. Full competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulations and the associated control and data acquisition systems. Ability to provide guidance and/or training to Technicians and Operators. Competent in personal computer software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel. Strong analytical and deductive reasoning, oral and written communication, technical writing, and mathematical skills. Demonstrated ability to troubleshoot and solve DCS hardware and process control problems. Full ability to conduct site inspections or walk downs, including working at heights. Experience in commissioning medium to large scale industrial control installations Demonstrated ability to maintain documentation related to the DCS and instrumentation. Contribute to a team-centric work environment based on mutual respect and integrity. Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers. Education Degree or an equivalent combination of education and demonstrated related experience may be accepted in lieu of preferred level of education: Associate Preferred Discipline: Technical Studies Must have a valid TWIC card or proof of TWIC card application prior to employment. Other disciplines may be substituted for the preferred discipline(s) listed above. Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification Job Category LNG Operations Posting Date 2025-12-04 Apply Before 2026-02-12T04:59 00 Job Schedule Full time Locations 2100 Cove Point Rd, Lusby, MD, 20657, US Relocation Assistance Available for this position dependent upon eligibility requirements Business Cove Point LNG, LP Compensation details: 38.16-54.89 PI8ed4c1f1cfcf-6350
BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting career opportunity as an LNG Plant Control Systems Technician/Senior LNG Plant Control Systems Technician located at our Cove Point Facility located in Lusby, MD. RESPONSIBILITIES The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) reports directly to the DCS Supervisor and is a member of a multi-disciplined crew responsible for the SAFE Operation and Maintenance of a liquefied natural gas (LNG) import /export and re-gasification terminal including LNG process systems infrastructure controls, emergency response, electrical and emergency power generation, turbines, auxiliary control support systems, PLC, and Distributed Control System (DCS). Dedication sensitivity to safety issues and compliance with policies and procedures is essential for the safe reliable and efficient operation of the terminal. The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) specific job responsibilities include the following: The successful candidate must be willing to work in an industrial environment, including time spent performing DCS technician engineering room and field work including the inspection, testing, service, repair, configuration, calibration, and installation of automated control systems, Human Machine Interface (HMI) consoles, network hardware, and related components that would be found in industrial facilities such as a power station, chemical plant, manufacturing facility, petrochemical NGL, cryogenic natural gas processing or hydrocarbon facility. Work on complex and detailed control systems, troubleshoots and repairs control and network systems, and replaces component parts as required. Under the supervision or direction of an experienced Senior or Lead, maintain the DCS network hardware and configuration, perform changes to existing Emerson DeltaV logic and HMI graphics, GE MK VIe or Woodward Combustion/Steam Turbine Controls, Allen Bradley and other local Programmable Logic Controls (PLCs) and other duties as assigned. Performs periodic backup on all DCS / PLC controllers, network and supporting computers. Submit drawings and configuration changes made on the DCS, network, and field instrumentation following the site's modification and MOC process. Assist in training and guiding less experienced Technicians and addressing Operations control system concerns. Obtain a basic understanding of all plant DCS, Safety Instrumented System (SIS), PLC, LNG regasification and liquefaction processes and control systems. Understands control systems for plant utilities, including air, water, power generation, and nitrogen Monitors or assists in the loading/unloading of LNG ships. May perform the duties of an LNG Technician (DCS) in a rotational shift environment, including holidays, weekends, and nights. Participates in training on environmental safety, operations and security procedures. Recognizes the safety and environmental consequences of actions taken. Maintains the highest levels of environmental and safety compliance. Performs all duties applying safety protocols and adhering to regulatory mandates. Reviews and analyzes alarm history to improve operational efficiencies and eliminate nuisance alarms Assists in the development, implementation, and execution of OT cybersecurity policies and procedures. Manages updates on all cybersecurity OT compliance software used for asset inventory, whitelisting, intrusion detection, password vault, disaster recovery, and intrusion detection. Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Plant Control System Technician: 2+ years of related experience. Applied knowledge of automated control system instruments such as flow meters, pressure gauges, thermocouples, regulators and other industrial components Competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulation compliance systems. Ability to provide guidance and/or training to less experienced Technicians and Operators. Competent in workstation and server software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel Analytical and deductive reasoning skills, oral and written communication skills, technical writing skills, instrumentation skills, and mathematical skills. Ability to troubleshoot and solve equipment or process problems. Ability to conduct site inspections or walk downs, including working at heights. Ability to recommend changes to DCS, instrumentation drawing and configuration documentation. Sr Plant Control System Technician: A minimum of 5+ years direct experience with operations, instrumentation, DCS, PLC's and Computer systems. Applied knowledge of automated control instruments such as flow meters, pressure gauges, thermocouples, regulators, and other industrial components. Full competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulations and the associated control and data acquisition systems. Ability to provide guidance and/or training to Technicians and Operators. Competent in personal computer software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel. Strong analytical and deductive reasoning, oral and written communication, technical writing, and mathematical skills. Demonstrated ability to troubleshoot and solve DCS hardware and process control problems. Full ability to conduct site inspections or walk downs, including working at heights. Experience in commissioning medium to large scale industrial control installations Demonstrated ability to maintain documentation related to the DCS and instrumentation. Contribute to a team-centric work environment based on mutual respect and integrity. Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers. Education Degree or an equivalent combination of education and demonstrated related experience may be accepted in lieu of preferred level of education: Associate Preferred Discipline: Technical Studies Must have a valid TWIC card or proof of TWIC card application prior to employment. Other disciplines may be substituted for the preferred discipline(s) listed above. Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification Job Category LNG Operations Posting Date 2025-12-04 Apply Before 2026-02-12T04:59 00 Job Schedule Full time Locations 2100 Cove Point Rd, Lusby, MD, 20657, US Relocation Assistance Available for this position dependent upon eligibility requirements Business Cove Point LNG, LP Compensation details: 38.16-54.89 PI814069a1ef7c-6350
01/10/2026
Full time
BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting career opportunity as an LNG Plant Control Systems Technician/Senior LNG Plant Control Systems Technician located at our Cove Point Facility located in Lusby, MD. RESPONSIBILITIES The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) reports directly to the DCS Supervisor and is a member of a multi-disciplined crew responsible for the SAFE Operation and Maintenance of a liquefied natural gas (LNG) import /export and re-gasification terminal including LNG process systems infrastructure controls, emergency response, electrical and emergency power generation, turbines, auxiliary control support systems, PLC, and Distributed Control System (DCS). Dedication sensitivity to safety issues and compliance with policies and procedures is essential for the safe reliable and efficient operation of the terminal. The LNG Plant Control Systems Technician / Sr LNG Plant Control System Technician (DCS) specific job responsibilities include the following: The successful candidate must be willing to work in an industrial environment, including time spent performing DCS technician engineering room and field work including the inspection, testing, service, repair, configuration, calibration, and installation of automated control systems, Human Machine Interface (HMI) consoles, network hardware, and related components that would be found in industrial facilities such as a power station, chemical plant, manufacturing facility, petrochemical NGL, cryogenic natural gas processing or hydrocarbon facility. Work on complex and detailed control systems, troubleshoots and repairs control and network systems, and replaces component parts as required. Under the supervision or direction of an experienced Senior or Lead, maintain the DCS network hardware and configuration, perform changes to existing Emerson DeltaV logic and HMI graphics, GE MK VIe or Woodward Combustion/Steam Turbine Controls, Allen Bradley and other local Programmable Logic Controls (PLCs) and other duties as assigned. Performs periodic backup on all DCS / PLC controllers, network and supporting computers. Submit drawings and configuration changes made on the DCS, network, and field instrumentation following the site's modification and MOC process. Assist in training and guiding less experienced Technicians and addressing Operations control system concerns. Obtain a basic understanding of all plant DCS, Safety Instrumented System (SIS), PLC, LNG regasification and liquefaction processes and control systems. Understands control systems for plant utilities, including air, water, power generation, and nitrogen Monitors or assists in the loading/unloading of LNG ships. May perform the duties of an LNG Technician (DCS) in a rotational shift environment, including holidays, weekends, and nights. Participates in training on environmental safety, operations and security procedures. Recognizes the safety and environmental consequences of actions taken. Maintains the highest levels of environmental and safety compliance. Performs all duties applying safety protocols and adhering to regulatory mandates. Reviews and analyzes alarm history to improve operational efficiencies and eliminate nuisance alarms Assists in the development, implementation, and execution of OT cybersecurity policies and procedures. Manages updates on all cybersecurity OT compliance software used for asset inventory, whitelisting, intrusion detection, password vault, disaster recovery, and intrusion detection. Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Plant Control System Technician: 2+ years of related experience. Applied knowledge of automated control system instruments such as flow meters, pressure gauges, thermocouples, regulators and other industrial components Competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulation compliance systems. Ability to provide guidance and/or training to less experienced Technicians and Operators. Competent in workstation and server software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel Analytical and deductive reasoning skills, oral and written communication skills, technical writing skills, instrumentation skills, and mathematical skills. Ability to troubleshoot and solve equipment or process problems. Ability to conduct site inspections or walk downs, including working at heights. Ability to recommend changes to DCS, instrumentation drawing and configuration documentation. Sr Plant Control System Technician: A minimum of 5+ years direct experience with operations, instrumentation, DCS, PLC's and Computer systems. Applied knowledge of automated control instruments such as flow meters, pressure gauges, thermocouples, regulators, and other industrial components. Full competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulations and the associated control and data acquisition systems. Ability to provide guidance and/or training to Technicians and Operators. Competent in personal computer software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel. Strong analytical and deductive reasoning, oral and written communication, technical writing, and mathematical skills. Demonstrated ability to troubleshoot and solve DCS hardware and process control problems. Full ability to conduct site inspections or walk downs, including working at heights. Experience in commissioning medium to large scale industrial control installations Demonstrated ability to maintain documentation related to the DCS and instrumentation. Contribute to a team-centric work environment based on mutual respect and integrity. Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers. Education Degree or an equivalent combination of education and demonstrated related experience may be accepted in lieu of preferred level of education: Associate Preferred Discipline: Technical Studies Must have a valid TWIC card or proof of TWIC card application prior to employment. Other disciplines may be substituted for the preferred discipline(s) listed above. Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification Job Category LNG Operations Posting Date 2025-12-04 Apply Before 2026-02-12T04:59 00 Job Schedule Full time Locations 2100 Cove Point Rd, Lusby, MD, 20657, US Relocation Assistance Available for this position dependent upon eligibility requirements Business Cove Point LNG, LP Compensation details: 38.16-54.89 PI814069a1ef7c-6350
Job Summary We are seeking an experienced AI / Machine Learning Engineer to drive data-driven transformation across our manufacturing operations. In this role, you will collaborate closely with manufacturing, operations, and business teams to identify high-impact AI/ML use cases and deliver end-to-end machine learning solutions. You will work with large-scale manufacturing data to improve quality, efficiency, and operational decision-making. Key Roles & Responsibilities Identify & Groom AI/ML Use Cases Partner with manufacturing, operations, and business stakeholders to identify opportunities where AI and machine learning can solve real-world problems, improve efficiency, and create measurable value. Define project scope, objectives, and success metrics. End-to-End Machine Learning Delivery Own machine learning initiatives from ideation through production. This includes data collection, data cleaning, feature engineering, model development, validation, deployment, and ongoing monitoring in production environments. Programming & Data Engineering Develop clean, scalable, and efficient code primarily using Python. Build data pipelines, automate analytical workflows, and support ML model training and deployment. Use SQL extensively for data extraction, transformation, and analysis. Data Analysis & Modeling Analyze large and complex manufacturing datasets from systems such as MES, ERP, and IoT sensors. Identify patterns, engineer meaningful features, and develop predictive or prescriptive models for use cases such as quality improvement, predictive maintenance, and process optimization. Insight Communication & Stakeholder Engagement Translate complex technical analyses into clear, actionable insights and recommendations for non-technical stakeholders, enabling data-driven decision-making across the organization. Candidate Expectations & Qualifications Experience 3+ years of hands-on experience in AI, Machine Learning, or Data Science. Prior experience in manufacturing, industrial, or operations-focused environments is strongly preferred. Technical Skills Strong proficiency in Python and ML libraries such as scikit-learn, TensorFlow, and PyTorch. Solid SQL skills for data querying, transformation, and analysis. Experience with data visualization tools such as Power BI or Tableau. Basic understanding of MLOps concepts, including model deployment, monitoring, and lifecycle management. Domain Knowledge (Preferred) Understanding of manufacturing processes and data sources such as MES, ERP, and IoT systems. Familiarity with common manufacturing challenges, including quality control, predictive maintenance, process optimization, and order backlog management. Soft Skills Strong analytical and problem-solving mindset with the ability to decompose complex problems into data-driven solutions. Excellent communication and collaboration skills, enabling effective interaction with cross-functional teams ranging from plant operators to senior leadership. Nice-to-Have Skills Experience working with cloud platforms such as AWS, Azure, or Google Cloud Platform. Knowledge of time-series analysis, anomaly detection, and optimization techniques.
01/08/2026
Full time
Job Summary We are seeking an experienced AI / Machine Learning Engineer to drive data-driven transformation across our manufacturing operations. In this role, you will collaborate closely with manufacturing, operations, and business teams to identify high-impact AI/ML use cases and deliver end-to-end machine learning solutions. You will work with large-scale manufacturing data to improve quality, efficiency, and operational decision-making. Key Roles & Responsibilities Identify & Groom AI/ML Use Cases Partner with manufacturing, operations, and business stakeholders to identify opportunities where AI and machine learning can solve real-world problems, improve efficiency, and create measurable value. Define project scope, objectives, and success metrics. End-to-End Machine Learning Delivery Own machine learning initiatives from ideation through production. This includes data collection, data cleaning, feature engineering, model development, validation, deployment, and ongoing monitoring in production environments. Programming & Data Engineering Develop clean, scalable, and efficient code primarily using Python. Build data pipelines, automate analytical workflows, and support ML model training and deployment. Use SQL extensively for data extraction, transformation, and analysis. Data Analysis & Modeling Analyze large and complex manufacturing datasets from systems such as MES, ERP, and IoT sensors. Identify patterns, engineer meaningful features, and develop predictive or prescriptive models for use cases such as quality improvement, predictive maintenance, and process optimization. Insight Communication & Stakeholder Engagement Translate complex technical analyses into clear, actionable insights and recommendations for non-technical stakeholders, enabling data-driven decision-making across the organization. Candidate Expectations & Qualifications Experience 3+ years of hands-on experience in AI, Machine Learning, or Data Science. Prior experience in manufacturing, industrial, or operations-focused environments is strongly preferred. Technical Skills Strong proficiency in Python and ML libraries such as scikit-learn, TensorFlow, and PyTorch. Solid SQL skills for data querying, transformation, and analysis. Experience with data visualization tools such as Power BI or Tableau. Basic understanding of MLOps concepts, including model deployment, monitoring, and lifecycle management. Domain Knowledge (Preferred) Understanding of manufacturing processes and data sources such as MES, ERP, and IoT systems. Familiarity with common manufacturing challenges, including quality control, predictive maintenance, process optimization, and order backlog management. Soft Skills Strong analytical and problem-solving mindset with the ability to decompose complex problems into data-driven solutions. Excellent communication and collaboration skills, enabling effective interaction with cross-functional teams ranging from plant operators to senior leadership. Nice-to-Have Skills Experience working with cloud platforms such as AWS, Azure, or Google Cloud Platform. Knowledge of time-series analysis, anomaly detection, and optimization techniques.
We are seeking two experienced MACHINE OPERATORS to work on a rotating shift basis for a client of ours in Mosinee. Will be training at that location in preparation for an expanding plant in Plover this spring. Pay is $20.50/hour or more based on experience. Must be self-motivated, team-oriented and eager to work in food production. Prior food manufacturing experience is highly desired . Will monitor and control production machinery and use "clean in place" procedures on product machinery & tools. Will also take samples correctly of product for testing in the lab. Will complete and document in accordance to customer specification and government agencies Will aid other employees to maintain a safe process and qualify product Maintain a clean work environment by: Aiding the plant manager Operating within HACCP guidelines Lifting up to 60 pounds from the ground Openings are on a rotating 1 week days (8am-4pm)/ 1 week nights (2pm-9/10pm) and at times overnight working between 6pm-6am, Monday-Friday with some Saturdays as needed as well. If your hours are flexible and you are looking for a company to call home, this is it! We are looking for candidates with a strong work ethic who have a solid work history and good job longevity. Must be able to work alongside minors. Drug testing will be completed prior to placement. Flex-Staff is an Equal Opportunity Employer, which includes providing equal opportunity for protected veterans and individuals with disabilities. Experience and Education: Minimum of 1 year machine operating experience High school diploma Desired Qualifications: Willing and able to perform all job essential functions with or without accommodation Willing and able to be exposed to/perform all physical and environmental factors Certifications: Forklift Certification Experience: 1-3 years in a food production position Experience with Dryers, evaporators, vats, milk separators UF, MF, or RO systems Experience in a food manufacturing facility Interested candidates can apply on-line at or submit a resume to Flex-Staff is an Equal Opportunity Employer, which includes providing equal opportunity for protected veterans and individuals with disabilities. Pandologic. Category:Manufacturing,
01/08/2026
Full time
We are seeking two experienced MACHINE OPERATORS to work on a rotating shift basis for a client of ours in Mosinee. Will be training at that location in preparation for an expanding plant in Plover this spring. Pay is $20.50/hour or more based on experience. Must be self-motivated, team-oriented and eager to work in food production. Prior food manufacturing experience is highly desired . Will monitor and control production machinery and use "clean in place" procedures on product machinery & tools. Will also take samples correctly of product for testing in the lab. Will complete and document in accordance to customer specification and government agencies Will aid other employees to maintain a safe process and qualify product Maintain a clean work environment by: Aiding the plant manager Operating within HACCP guidelines Lifting up to 60 pounds from the ground Openings are on a rotating 1 week days (8am-4pm)/ 1 week nights (2pm-9/10pm) and at times overnight working between 6pm-6am, Monday-Friday with some Saturdays as needed as well. If your hours are flexible and you are looking for a company to call home, this is it! We are looking for candidates with a strong work ethic who have a solid work history and good job longevity. Must be able to work alongside minors. Drug testing will be completed prior to placement. Flex-Staff is an Equal Opportunity Employer, which includes providing equal opportunity for protected veterans and individuals with disabilities. Experience and Education: Minimum of 1 year machine operating experience High school diploma Desired Qualifications: Willing and able to perform all job essential functions with or without accommodation Willing and able to be exposed to/perform all physical and environmental factors Certifications: Forklift Certification Experience: 1-3 years in a food production position Experience with Dryers, evaporators, vats, milk separators UF, MF, or RO systems Experience in a food manufacturing facility Interested candidates can apply on-line at or submit a resume to Flex-Staff is an Equal Opportunity Employer, which includes providing equal opportunity for protected veterans and individuals with disabilities. Pandologic. Category:Manufacturing,
Express Employment Professionals
Saint Louis, Missouri
CNC Set-Up Technician Location: Kirkwood, MO Pay Range: $25-$30/hr, depending on experience (DOE) Schedule: Full-Time Position Summary: The CNC Set-Up Technician at our valued client located in Kirkwood, MO is responsible for advanced set-up, troubleshooting, and repair of CNC equipment including mills and lathes. This position requires deep technical expertise and the ability to immediately contribute with minimal training. The technician is expected to create, manage, optimize, and maintain CNC program files in both G-code and Mazatrol software. Collaboration with Manufacturing Engineering and involvement in prototype part machining and creation are critical parts of this role. Key Responsibilities: p :pt-0 &>p :mb-2 &>p :my-0"> Set up, operate, and troubleshoot all CNC mills and lathes with minimal supervision or training needed. p :pt-0 &>p :mb-2 &>p :my-0"> Diagnose and repair technical issues on CNC equipment, addressing mechanical, electrical, and software-related problems. p :pt-0 &>p :mb-2 &>p :my-0"> Develop, edit, and optimize CNC programs using both G-code and Mazatrol for new and existing projects. p :pt-0 &>p :mb-2 &>p :my-0"> Maintain a library of program files, ensuring accurate documentation and revision control. p :pt-0 &>p :mb-2 &>p :my-0"> Work closely with Manufacturing Engineering to refine machining processes and improve efficiency. p :pt-0 &>p :mb-2 &>p :my-0"> Read and interpret complex engineering drawings, blueprints, and technical documents. p :pt-0 &>p :mb-2 &>p :my-0"> Machine prototype parts and support new product development projects as directed. p :pt-0 &>p :mb-2 &>p :my-0"> Perform precise measurements using micrometers, calipers, and other inspection tools. p :pt-0 &>p :mb-2 &>p :my-0"> Ensure all machines are operated and maintained in a safe and efficient manner. p :pt-0 &>p :mb-2 &>p :my-0"> Train and mentor less experienced operators or machinists as required. Qualifications: p :pt-0 &>p :mb-2 &>p :my-0"> Extensive hands-on experience setting up and programming CNC mills and lathes. p :pt-0 &>p :mb-2 &>p :my-0"> Complete working knowledge of G-code and Mazatrol programming for both set-up and troubleshooting. p :pt-0 &>p :mb-2 &>p :my-0"> Ability to quickly identify, diagnose, and repair mechanical and control systems on CNC equipment. p :pt-0 &>p :mb-2 &>p :my-0"> Proven track record of working independently and producing high-quality results with minimal supervision. p :pt-0 &>p :mb-2 &>p :my-0"> Familiarity with manufacturing best practices, machining of prototypes, and support of engineering projects. p :pt-0 &>p :mb-2 &>p :my-0"> Strong understanding of engineering drawings, CAD/CAM files, and quality standards. p :pt-0 &>p :mb-2 &>p :my-0"> High school diploma or GED required; technical certifications or advanced machining coursework preferred. p :pt-0 &>p :mb-2 &>p :my-0"> Excellent organizational, communication, and teamwork skills. Physical Requirements: p :pt-0 &>p :mb-2 &>p :my-0"> Ability to stand, walk, bend, and lift moderately heavy items throughout the shift as required for equipment maintenance and set-up. PandoLogic. Category:Manufacturing,Louis, MO-63110
12/29/2025
Full time
CNC Set-Up Technician Location: Kirkwood, MO Pay Range: $25-$30/hr, depending on experience (DOE) Schedule: Full-Time Position Summary: The CNC Set-Up Technician at our valued client located in Kirkwood, MO is responsible for advanced set-up, troubleshooting, and repair of CNC equipment including mills and lathes. This position requires deep technical expertise and the ability to immediately contribute with minimal training. The technician is expected to create, manage, optimize, and maintain CNC program files in both G-code and Mazatrol software. Collaboration with Manufacturing Engineering and involvement in prototype part machining and creation are critical parts of this role. Key Responsibilities: p :pt-0 &>p :mb-2 &>p :my-0"> Set up, operate, and troubleshoot all CNC mills and lathes with minimal supervision or training needed. p :pt-0 &>p :mb-2 &>p :my-0"> Diagnose and repair technical issues on CNC equipment, addressing mechanical, electrical, and software-related problems. p :pt-0 &>p :mb-2 &>p :my-0"> Develop, edit, and optimize CNC programs using both G-code and Mazatrol for new and existing projects. p :pt-0 &>p :mb-2 &>p :my-0"> Maintain a library of program files, ensuring accurate documentation and revision control. p :pt-0 &>p :mb-2 &>p :my-0"> Work closely with Manufacturing Engineering to refine machining processes and improve efficiency. p :pt-0 &>p :mb-2 &>p :my-0"> Read and interpret complex engineering drawings, blueprints, and technical documents. p :pt-0 &>p :mb-2 &>p :my-0"> Machine prototype parts and support new product development projects as directed. p :pt-0 &>p :mb-2 &>p :my-0"> Perform precise measurements using micrometers, calipers, and other inspection tools. p :pt-0 &>p :mb-2 &>p :my-0"> Ensure all machines are operated and maintained in a safe and efficient manner. p :pt-0 &>p :mb-2 &>p :my-0"> Train and mentor less experienced operators or machinists as required. Qualifications: p :pt-0 &>p :mb-2 &>p :my-0"> Extensive hands-on experience setting up and programming CNC mills and lathes. p :pt-0 &>p :mb-2 &>p :my-0"> Complete working knowledge of G-code and Mazatrol programming for both set-up and troubleshooting. p :pt-0 &>p :mb-2 &>p :my-0"> Ability to quickly identify, diagnose, and repair mechanical and control systems on CNC equipment. p :pt-0 &>p :mb-2 &>p :my-0"> Proven track record of working independently and producing high-quality results with minimal supervision. p :pt-0 &>p :mb-2 &>p :my-0"> Familiarity with manufacturing best practices, machining of prototypes, and support of engineering projects. p :pt-0 &>p :mb-2 &>p :my-0"> Strong understanding of engineering drawings, CAD/CAM files, and quality standards. p :pt-0 &>p :mb-2 &>p :my-0"> High school diploma or GED required; technical certifications or advanced machining coursework preferred. p :pt-0 &>p :mb-2 &>p :my-0"> Excellent organizational, communication, and teamwork skills. Physical Requirements: p :pt-0 &>p :mb-2 &>p :my-0"> Ability to stand, walk, bend, and lift moderately heavy items throughout the shift as required for equipment maintenance and set-up. PandoLogic. Category:Manufacturing,Louis, MO-63110
