Assistant Director - Special Facilities Management Job ID: 14653 Location: El Paso, TX Full/Part Time: Full Time Regular/Temporary: Regular Position Information Hiring Department: Special Facilities Management Department Posting End Date: Open until filled. Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekends FLSA status: Exempt Earliest Start Date: As soon as possible. Salary: Commensurate with experience. Required Application Materials: Resume Cover Letter List of three references Note: To the extent that this position involves research, work, or access to critical infrastructure as referenced in Executive Order GA-48, being hired for and continuing to be employed in this position requires the ability to maintain the security or integrity of the infrastructure. The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Position Summary Summary: Reports to, and administratively assists, the Director of Special Facility Management in all functions of the Special Events Department. The Assistant Director of Special Facility Management will oversee operations and perform management functions at venues and events in the Office of Special Events. The Assistant Director will be responsible for day-to-day operations to ensure all event needs are met. This position will work closely with staff to provide a high level customer service in order to ensure a friendly, safe environment at all events, and work with operations and technical team on developing policies and procedures, assist with planning and cost estimates. Additionally, the Assistant Director will oversee personnel staffing, job performance, budget, equipment and supplies inventory, and provide input on venue improvements. Note: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Statement of Duties and Responsibilities: Coordinate the events calendar and assigns daily work to supervisors. Assist with the scheduling of full time and part time staff for all events. Prioritize posts and determine suitable staffing levels with Supervisors. Assists with event layouts and planning. Assists with event execution from inception to restore. Inspect and assure that final event setup thoroughly matches the Requisition or Production Advance before client arrives. Acts as the liaison with live event production staff regarding security and event operations for ticketed and nonticketed events. Supervises and participates in Athletics Game Day Management; Serves as manager on duty, as required. Oversee the maintenance of the special use facilities grounds and facility equipment. Ensures the quality of services and workmanship by managing, planning, scheduling, supervising engineering and electrical maintenance personnel. Works with Facilities Services on campus to implement the most efficient and cost effective means for operation of mechanical systems, HVAC systems and lighting systems. Manages resources to ensure compliance with budget objectives, and standards of facility and equipment repair, equipment inventory and cost control. Responsible for ensuring that outside work performed by other departments, contractors, and/or vendors for the facilites are coordinated through the office to insure the work is conducted within prescribed industry standards and norms. Assists in seeking outside clients and events to create additional revenues for the Don Haskins Center, Sun Bowl Stadium, Magoffin Auditorium for the department. Monitors the formulation and coordination of account specifications, requirements for monetary transactions, and associated documents; reviews and approves negotiated agreements for area(s) of assigned responsibility. Reviews cost factors and estimates used in planning, organizing, and scheduling work, preparing bids, selecting vendors or subcontractors, and determining cost effectiveness. Assists in timekeeping software and payroll procedures for part time staff working in the Auxiliary Services Shared Pool. Conducts overall management of a full time supervisors, student work-studies, and internship/volunteer programs. Interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; coaching and counseling subordinates; rewarding and disciplining employees; addressing complaints and resolving problem. Understands department's role in accomplishing the University's mission. Acts as liaison between University Departments and External Clients. Participates in various committees, professional trainings, industry conferences, and conventions. knowledge of all Microsoft Office software, Autodesk CAD software, and able to learn and use institutional software systems. Promotes organization policies and procedures in compliance with local, state, and federal rules and regulations; advises University personnel regarding the development and implementation of regulatory strategy, potential areas of regulatory concern, and new government/regulatory developments. Provides training policies, standards, guidelines, and security monitoring processes in relation to general control, privacy regulations, and development and operation of the University's infrastructure. Knowledge of all Microsoft Office software and able to learn and use institutional software systems. Complies with all State and University policies. Other duties may be assigned. Supervisory Responsibilities Carries out supervisory responsibilities in accordance with the organization's objectives, policies and applicable laws. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: Education: Bachelor's Degree and Experience: Three to 5 years years of experience, and/or training to the essential duties and responsibilities; or equivalent combination of education and experience. Occasional traveling required. Preferred Qualifications: 5+ years related experience (Venue Management, Facility Management, Event Management and/or production, Event Promotion); and a minimum of (2) years of supervisory experience. Strong communicator with proven ability to drive projects assigned to completion. Excellent organizational skills and attention to detail. Ability to foster and develop good working relationships with the University's internal clients as well as clients in the entertainment sectors. Strong written and verbal communication skills. Strong customer service skills. Ability to coordinate multiple projects. Creativity and proven problem solving skills. Ability to work non-traditional hours to include evenings and weekends. Proven ability and knowledge to work with professionals in the live entertainment business. Ability to work well with faculty, staff, students, and the general public. Why Pick UTEP About the University of Texas at El Paso UTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve. The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America. About VP Business Affairs . click apply for full job details
01/10/2026
Full time
Assistant Director - Special Facilities Management Job ID: 14653 Location: El Paso, TX Full/Part Time: Full Time Regular/Temporary: Regular Position Information Hiring Department: Special Facilities Management Department Posting End Date: Open until filled. Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekends FLSA status: Exempt Earliest Start Date: As soon as possible. Salary: Commensurate with experience. Required Application Materials: Resume Cover Letter List of three references Note: To the extent that this position involves research, work, or access to critical infrastructure as referenced in Executive Order GA-48, being hired for and continuing to be employed in this position requires the ability to maintain the security or integrity of the infrastructure. The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Position Summary Summary: Reports to, and administratively assists, the Director of Special Facility Management in all functions of the Special Events Department. The Assistant Director of Special Facility Management will oversee operations and perform management functions at venues and events in the Office of Special Events. The Assistant Director will be responsible for day-to-day operations to ensure all event needs are met. This position will work closely with staff to provide a high level customer service in order to ensure a friendly, safe environment at all events, and work with operations and technical team on developing policies and procedures, assist with planning and cost estimates. Additionally, the Assistant Director will oversee personnel staffing, job performance, budget, equipment and supplies inventory, and provide input on venue improvements. Note: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Statement of Duties and Responsibilities: Coordinate the events calendar and assigns daily work to supervisors. Assist with the scheduling of full time and part time staff for all events. Prioritize posts and determine suitable staffing levels with Supervisors. Assists with event layouts and planning. Assists with event execution from inception to restore. Inspect and assure that final event setup thoroughly matches the Requisition or Production Advance before client arrives. Acts as the liaison with live event production staff regarding security and event operations for ticketed and nonticketed events. Supervises and participates in Athletics Game Day Management; Serves as manager on duty, as required. Oversee the maintenance of the special use facilities grounds and facility equipment. Ensures the quality of services and workmanship by managing, planning, scheduling, supervising engineering and electrical maintenance personnel. Works with Facilities Services on campus to implement the most efficient and cost effective means for operation of mechanical systems, HVAC systems and lighting systems. Manages resources to ensure compliance with budget objectives, and standards of facility and equipment repair, equipment inventory and cost control. Responsible for ensuring that outside work performed by other departments, contractors, and/or vendors for the facilites are coordinated through the office to insure the work is conducted within prescribed industry standards and norms. Assists in seeking outside clients and events to create additional revenues for the Don Haskins Center, Sun Bowl Stadium, Magoffin Auditorium for the department. Monitors the formulation and coordination of account specifications, requirements for monetary transactions, and associated documents; reviews and approves negotiated agreements for area(s) of assigned responsibility. Reviews cost factors and estimates used in planning, organizing, and scheduling work, preparing bids, selecting vendors or subcontractors, and determining cost effectiveness. Assists in timekeeping software and payroll procedures for part time staff working in the Auxiliary Services Shared Pool. Conducts overall management of a full time supervisors, student work-studies, and internship/volunteer programs. Interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; coaching and counseling subordinates; rewarding and disciplining employees; addressing complaints and resolving problem. Understands department's role in accomplishing the University's mission. Acts as liaison between University Departments and External Clients. Participates in various committees, professional trainings, industry conferences, and conventions. knowledge of all Microsoft Office software, Autodesk CAD software, and able to learn and use institutional software systems. Promotes organization policies and procedures in compliance with local, state, and federal rules and regulations; advises University personnel regarding the development and implementation of regulatory strategy, potential areas of regulatory concern, and new government/regulatory developments. Provides training policies, standards, guidelines, and security monitoring processes in relation to general control, privacy regulations, and development and operation of the University's infrastructure. Knowledge of all Microsoft Office software and able to learn and use institutional software systems. Complies with all State and University policies. Other duties may be assigned. Supervisory Responsibilities Carries out supervisory responsibilities in accordance with the organization's objectives, policies and applicable laws. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: Education: Bachelor's Degree and Experience: Three to 5 years years of experience, and/or training to the essential duties and responsibilities; or equivalent combination of education and experience. Occasional traveling required. Preferred Qualifications: 5+ years related experience (Venue Management, Facility Management, Event Management and/or production, Event Promotion); and a minimum of (2) years of supervisory experience. Strong communicator with proven ability to drive projects assigned to completion. Excellent organizational skills and attention to detail. Ability to foster and develop good working relationships with the University's internal clients as well as clients in the entertainment sectors. Strong written and verbal communication skills. Strong customer service skills. Ability to coordinate multiple projects. Creativity and proven problem solving skills. Ability to work non-traditional hours to include evenings and weekends. Proven ability and knowledge to work with professionals in the live entertainment business. Ability to work well with faculty, staff, students, and the general public. Why Pick UTEP About the University of Texas at El Paso UTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve. The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America. About VP Business Affairs . click apply for full job details
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIfeab5-8042
01/10/2026
Full time
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIfeab5-8042
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Title : Customer Account Manager Hours : 8am-5pm Monday-Friday Salary : $50,000-$60,000/yr Opportunity summary: As a Senior Assistant Customer Service, you will represent Smurfit Westrock to the customer and act as a critical liaison between the customer, sales, and operations teams. You will be the first point of contact with our customer and set the tone for their Smurfit Westrock experience. You will maintain the ongoing relationship with multiple customers and sales staff, utilizing a diverse knowledge of products, logistics, production planning, and inventory management. As a Smurfit Westrock employee, you will be empowered to develop yourself through a culture of training to give you the tools to accomplish your best work and satisfy the customer. How you will impact Smurfit Westrock Represent Smurfit Westrock values and deliver excellent service through each interaction. Facilitates quotes and provides pricing. Creates new item specifications/projects. Manage accounts through processing incoming orders, and/or inquiries, by scheduling demand on machines, and managing orders to ensure customer's delivery requirements are met. Proactively track order activity and inventory levels and alert appropriate staff/customers of any potential issues Handle outside purchases for services and materials required for the manufacturing of customer projects. Produce customized reports and share data with customers. Generate customer issues and support the Quality Manager to obtain information, research, and troubleshoot quality issues. What you need to succeed: High School diploma or G.E.D. (Preferred Associate/bachelor's degree) Customer service or related work experience in manufacturing environment or other industries (2+ years- experience preferred) Basic knowledge of operational procedures and tools. Demonstrates a customer-oriented mindset and ability to operate with customers' best interests in mind. Strong communication, collaboration, and problem-solving skills to complete a task or achieve a common goal and ensure a great customer experience. Demonstrates an interest, willingness, and drive to learn new things; seeks to understand concepts, processes, and ideas within area of functional expertise. Demonstrate organizational and time management skills to ensure achievement of desired results. Work in a fast-pace, team environment and partner with internal departments to achieve goals and satisfy customers. Ability to navigate in multiple systems. What we offer: Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities An attractive salary reflecting skills, competencies, and potential. A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. Generous benefits including 401 K Matching, Medical, Dental, Vision all starting day one. Stock Purchase Program, Tuition Reimbursement, and Wellness program. The starting range is $50,000-$60,000/yr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at and the application window is expected to close by 1/5/26. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law. The salary range for this position is $34,500.00 - $57,500.00, depending on your role, level, and location. The range listed is also the expected pay for roles in Illinois and Colorado. The benefits for this role include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your pay will be based on factors such as your skills, experience, and education. To learn more about this posting, please contact your recruiter during the hiring process. You may apply online at Smurfit Westrock External Careers and the application window is expected to close by 06-Feb-2026.
01/09/2026
Full time
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Title : Customer Account Manager Hours : 8am-5pm Monday-Friday Salary : $50,000-$60,000/yr Opportunity summary: As a Senior Assistant Customer Service, you will represent Smurfit Westrock to the customer and act as a critical liaison between the customer, sales, and operations teams. You will be the first point of contact with our customer and set the tone for their Smurfit Westrock experience. You will maintain the ongoing relationship with multiple customers and sales staff, utilizing a diverse knowledge of products, logistics, production planning, and inventory management. As a Smurfit Westrock employee, you will be empowered to develop yourself through a culture of training to give you the tools to accomplish your best work and satisfy the customer. How you will impact Smurfit Westrock Represent Smurfit Westrock values and deliver excellent service through each interaction. Facilitates quotes and provides pricing. Creates new item specifications/projects. Manage accounts through processing incoming orders, and/or inquiries, by scheduling demand on machines, and managing orders to ensure customer's delivery requirements are met. Proactively track order activity and inventory levels and alert appropriate staff/customers of any potential issues Handle outside purchases for services and materials required for the manufacturing of customer projects. Produce customized reports and share data with customers. Generate customer issues and support the Quality Manager to obtain information, research, and troubleshoot quality issues. What you need to succeed: High School diploma or G.E.D. (Preferred Associate/bachelor's degree) Customer service or related work experience in manufacturing environment or other industries (2+ years- experience preferred) Basic knowledge of operational procedures and tools. Demonstrates a customer-oriented mindset and ability to operate with customers' best interests in mind. Strong communication, collaboration, and problem-solving skills to complete a task or achieve a common goal and ensure a great customer experience. Demonstrates an interest, willingness, and drive to learn new things; seeks to understand concepts, processes, and ideas within area of functional expertise. Demonstrate organizational and time management skills to ensure achievement of desired results. Work in a fast-pace, team environment and partner with internal departments to achieve goals and satisfy customers. Ability to navigate in multiple systems. What we offer: Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities An attractive salary reflecting skills, competencies, and potential. A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. Generous benefits including 401 K Matching, Medical, Dental, Vision all starting day one. Stock Purchase Program, Tuition Reimbursement, and Wellness program. The starting range is $50,000-$60,000/yr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at and the application window is expected to close by 1/5/26. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law. The salary range for this position is $34,500.00 - $57,500.00, depending on your role, level, and location. The range listed is also the expected pay for roles in Illinois and Colorado. The benefits for this role include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your pay will be based on factors such as your skills, experience, and education. To learn more about this posting, please contact your recruiter during the hiring process. You may apply online at Smurfit Westrock External Careers and the application window is expected to close by 06-Feb-2026.
St. Jude Children's Research Hospital
Memphis, Tennessee
Job Description At St. Jude Children's Research Hospital, every role contributes to our mission of advancing cures and saving children. The Compliance Program Administrator for International Compliance plays a vital part in safeguarding the integrity of our global collaborations and research. This position leads to the development, implementation, and oversight of international compliance programs, including trade compliance areas such as export controls, sanctions, antiboycott laws, and anti-bribery/anti-corruption initiatives. The role ensures adherence to U.S. and international regulations while serving as a trusted resource for faculty, staff, and leadership. Responsibilities include implementing policies and training programs, conducting audits and monitoring activities, advising on complex compliance matters, and partnering on risk management strategies. Through this work, you help protect St. Jude's commitment to ethical practices and scientific excellence-so that together, we can continue to make discoveries that change lives worldwide. Key Responsibilities Program Leadership & Compliance Oversight Direct St. Jude 's international compliance program s , including policy development, implementation, and continuous improvement. Serve as the primary point of contact for export control s, sanctions, restricted party screenings, antiboycott laws, anti-bribery/anti-corruption programs, and general international compliance questions. Manage risk assessment processes, conduct periodic reviews, and ensure compliance program effectiveness. Regulatory Guidance & Determinations Provide export classifications and jurisdiction determinations for technology, equipment, software, and materials. Assess eligibility for license exemptions and exceptions; prepare technology control plans when required . Advise on applicability of the Fundamental Research Exclusion and other regulatory provisions. Training & Education Develop and maintain comprehensive international compliance training programs, including in-person sessions, online modules, and workshops. Ensure internal websites and resources remain current and accessible. Act as a resource for faculty, researchers, and staff engaged in export-controlled projects. Collaboration & Advisory Role Partner with internal offices (e.g., Grants and Sponsored Programs, Legal , Global Pediatric Medicine ) to provide guidance on proposals, awards, and agreements. Review St. Jude -related documents such as NDAs, MTAs, licensing agreements, and visa applications for export compliance considerations. Advise St. Jude on trade compliance, including export and import control s , sanctions and other applicable laws and institutional policies. Government & External Relations M anage relate correspondence with U.S. government agencies regarding , including registrations, licenses, classification requests, and technical assistance agreements. Represent St. Jude in national organizations such as the Association of University Export Control Officers (AUECO) and attend relevant continuing education sessions. Monitoring & Continuous Improvement Track and analyze regulatory changes impacting international compliance. Identify and implement new tools, systems, and efficiencies to strengthen compliance efforts. Maintain auditable records related to all areas of assigned work. Qualifications Minimum Education and/or Training: Bachelor's degree in relevant field required . J.D. or advanced degree in science, engineering, or related field. Minimum Experience: Minimum Requirement: 5+ years of directly applicable compliance experience (e.g., governance, auditing and monitoring, training, risk assessment, investigation of compliance concerns and action recommendation). Prior compliance program management experience. Proven performance in earlier role. Preferred Qualifications: Comprehensive knowledge of ITAR, EAR, OFAC, FCPA, and other related federal regulations. Acumen to conduct research, in partnership with legal teams, into global regulations that apply to St. Jude's international operations . Proficiency in compliance software tools (e.g., restricted party screening tools, shipping tools) , familiarity with research administration systems , a nd experience with federal export control systems including SNAP-R and ACE. Experience in a biomedical research environment or an academic medical center. Knowledge of cybersecurity principles and international research collaboration risks. Experience advising on complex and nuanced international compliance matters. People management experience a plus. Licensure, Registration and/or Certification Required by SJCRH Only: One of the following licenses/certifications must be obtained within 2 years of employment: RHIA: Registered Health Information Administrator. CHC: Certified in Healthcare Compliance. CHRC: Certification in Healthcare Research Compliance. CHPC: Certification in Healthcare Privacy Compliance. CCEP/CCEP-I: Certified Compliance & Ethics Professional/Certified Compliance & Ethics Professional - International. CCS: Certified Compliance Specialist. CPCO: Certified Professional Compliance Officer. CCP: Certified Compliance Professional. CIPP: Certified Information Privacy Professional, CQA: Certified Quality Auditor, CQE: Certified Quality Engineer, or other relevant license/certification. (LC: RN TN) Must possess a current Tennessee State Board of Nursing license if primary residence is Tennessee or a Nurse Licensure non-Compact state, (LC: RN ARK or RN Miss) Must possess a current State Board of Nursing license in the state of primary residence if the state is a Nurse Licensure Compact state. (LC: NBCRNA) Certification by National Board of Certification and Recertification of Nurse Anesthetists, (LC: APN-TN) Must possess a current Advanced Practice Nurse License issued by the Tennessee State Board of Nursing, (LC: PHARM-TN) Licensure by the Tennessee State Board of Pharmacy, (LC: PTCB-PTECH) Pharmacy Technician Certification by the Pharmacy Technician Certification Board (PTCB). CIA: Certified Internal Auditor. Preferred Certifications: Certified U.S. Export Compliance Officer (CUSECO) or Certified Sanctions and Export Control Professional (CSECP). Certified Compliance & Ethics Professional - International. CHC: Certified in Healthcare Compliance. CHRC: Certification in Healthcare Research Compliance. CHPC: Certification in Healthcare Privacy Compliance. Compensation In recognition of certain U.S. state and municipal pay transparency laws, St. Jude is including a reasonable estimate of the compensation range for this role. This is an estimate offered in good faith and a specific salary offer takes into account factors that are considered in making compensation decisions including but not limited to skill sets, experience and training, licensure and certifications, and other business and organizational needs. It is not typical for an individual to be hired at or near the top of the salary range and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current salary range is $86,320 - $154,960 per year for the role of Compliance Program Administrator - International Compliance. Explore our exceptional benefits ! St. Jude is an Equal Opportunity Employer No Search Firms St. Jude Children's Research Hospital does not accept unsolicited assistance from search firms for employment opportunities. Please do not call or email. All resumes submitted by search firms to any employee or other representative at St. Jude via email, the internet or in any form and/or method without a valid written search agreement in place and approved by HR will result in no fee being paid in the event the candidate is hired by St. Jude.
01/09/2026
Full time
Job Description At St. Jude Children's Research Hospital, every role contributes to our mission of advancing cures and saving children. The Compliance Program Administrator for International Compliance plays a vital part in safeguarding the integrity of our global collaborations and research. This position leads to the development, implementation, and oversight of international compliance programs, including trade compliance areas such as export controls, sanctions, antiboycott laws, and anti-bribery/anti-corruption initiatives. The role ensures adherence to U.S. and international regulations while serving as a trusted resource for faculty, staff, and leadership. Responsibilities include implementing policies and training programs, conducting audits and monitoring activities, advising on complex compliance matters, and partnering on risk management strategies. Through this work, you help protect St. Jude's commitment to ethical practices and scientific excellence-so that together, we can continue to make discoveries that change lives worldwide. Key Responsibilities Program Leadership & Compliance Oversight Direct St. Jude 's international compliance program s , including policy development, implementation, and continuous improvement. Serve as the primary point of contact for export control s, sanctions, restricted party screenings, antiboycott laws, anti-bribery/anti-corruption programs, and general international compliance questions. Manage risk assessment processes, conduct periodic reviews, and ensure compliance program effectiveness. Regulatory Guidance & Determinations Provide export classifications and jurisdiction determinations for technology, equipment, software, and materials. Assess eligibility for license exemptions and exceptions; prepare technology control plans when required . Advise on applicability of the Fundamental Research Exclusion and other regulatory provisions. Training & Education Develop and maintain comprehensive international compliance training programs, including in-person sessions, online modules, and workshops. Ensure internal websites and resources remain current and accessible. Act as a resource for faculty, researchers, and staff engaged in export-controlled projects. Collaboration & Advisory Role Partner with internal offices (e.g., Grants and Sponsored Programs, Legal , Global Pediatric Medicine ) to provide guidance on proposals, awards, and agreements. Review St. Jude -related documents such as NDAs, MTAs, licensing agreements, and visa applications for export compliance considerations. Advise St. Jude on trade compliance, including export and import control s , sanctions and other applicable laws and institutional policies. Government & External Relations M anage relate correspondence with U.S. government agencies regarding , including registrations, licenses, classification requests, and technical assistance agreements. Represent St. Jude in national organizations such as the Association of University Export Control Officers (AUECO) and attend relevant continuing education sessions. Monitoring & Continuous Improvement Track and analyze regulatory changes impacting international compliance. Identify and implement new tools, systems, and efficiencies to strengthen compliance efforts. Maintain auditable records related to all areas of assigned work. Qualifications Minimum Education and/or Training: Bachelor's degree in relevant field required . J.D. or advanced degree in science, engineering, or related field. Minimum Experience: Minimum Requirement: 5+ years of directly applicable compliance experience (e.g., governance, auditing and monitoring, training, risk assessment, investigation of compliance concerns and action recommendation). Prior compliance program management experience. Proven performance in earlier role. Preferred Qualifications: Comprehensive knowledge of ITAR, EAR, OFAC, FCPA, and other related federal regulations. Acumen to conduct research, in partnership with legal teams, into global regulations that apply to St. Jude's international operations . Proficiency in compliance software tools (e.g., restricted party screening tools, shipping tools) , familiarity with research administration systems , a nd experience with federal export control systems including SNAP-R and ACE. Experience in a biomedical research environment or an academic medical center. Knowledge of cybersecurity principles and international research collaboration risks. Experience advising on complex and nuanced international compliance matters. People management experience a plus. Licensure, Registration and/or Certification Required by SJCRH Only: One of the following licenses/certifications must be obtained within 2 years of employment: RHIA: Registered Health Information Administrator. CHC: Certified in Healthcare Compliance. CHRC: Certification in Healthcare Research Compliance. CHPC: Certification in Healthcare Privacy Compliance. CCEP/CCEP-I: Certified Compliance & Ethics Professional/Certified Compliance & Ethics Professional - International. CCS: Certified Compliance Specialist. CPCO: Certified Professional Compliance Officer. CCP: Certified Compliance Professional. CIPP: Certified Information Privacy Professional, CQA: Certified Quality Auditor, CQE: Certified Quality Engineer, or other relevant license/certification. (LC: RN TN) Must possess a current Tennessee State Board of Nursing license if primary residence is Tennessee or a Nurse Licensure non-Compact state, (LC: RN ARK or RN Miss) Must possess a current State Board of Nursing license in the state of primary residence if the state is a Nurse Licensure Compact state. (LC: NBCRNA) Certification by National Board of Certification and Recertification of Nurse Anesthetists, (LC: APN-TN) Must possess a current Advanced Practice Nurse License issued by the Tennessee State Board of Nursing, (LC: PHARM-TN) Licensure by the Tennessee State Board of Pharmacy, (LC: PTCB-PTECH) Pharmacy Technician Certification by the Pharmacy Technician Certification Board (PTCB). CIA: Certified Internal Auditor. Preferred Certifications: Certified U.S. Export Compliance Officer (CUSECO) or Certified Sanctions and Export Control Professional (CSECP). Certified Compliance & Ethics Professional - International. CHC: Certified in Healthcare Compliance. CHRC: Certification in Healthcare Research Compliance. CHPC: Certification in Healthcare Privacy Compliance. Compensation In recognition of certain U.S. state and municipal pay transparency laws, St. Jude is including a reasonable estimate of the compensation range for this role. This is an estimate offered in good faith and a specific salary offer takes into account factors that are considered in making compensation decisions including but not limited to skill sets, experience and training, licensure and certifications, and other business and organizational needs. It is not typical for an individual to be hired at or near the top of the salary range and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current salary range is $86,320 - $154,960 per year for the role of Compliance Program Administrator - International Compliance. Explore our exceptional benefits ! St. Jude is an Equal Opportunity Employer No Search Firms St. Jude Children's Research Hospital does not accept unsolicited assistance from search firms for employment opportunities. Please do not call or email. All resumes submitted by search firms to any employee or other representative at St. Jude via email, the internet or in any form and/or method without a valid written search agreement in place and approved by HR will result in no fee being paid in the event the candidate is hired by St. Jude.
Overview Responsible for organizing, directing and controlling the daily OR schedule to provide quality service for the Perioperative patient. Maintains active communication among medical staff, interdepartmental staff, and operating room staff; ensures schedule progression and issue resolution. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR), Education: Bachelor's Degree: Nursing (Required), Work Experience: Specific to patient population Responsibilities Coordinates and supervises the operation of the daily surgery schedule, case assignment, room and personnel assignments. Assumes Responsibility for the operation of the Surgery Department, Sterilization Department, and Endoscopy Department when Manager is not present. Assumes daily responsibility for coordination of the surgical schedule to assure the most efficient utilization of the operating rooms. Monitor case progression to identify potential schedule changes. Assigns, coordinates and monitors utilization of personnel and facilities. Provides for the assignment of lunch and break relief for intraoperative staff. Collaborates with charge anesthesiologist to ensure that the schedule runs efficiently in accordance with policies and protocols. Provides assistance and leadership to the staff to ensure departmental objectives and assignments are accomplished as scheduled. Acts as a resource person for clinical care problems in all areas. Markets department's services and equipment to physicians. Works to maintain a positive team relationship with physicians and coworkers. Monitors/coordinates special equipment. Evaluates the level of patient care delivered in the operating room and recommends changes to ensure compliance with established standards of nursing care. Coordination of staff work and vacation schedules to provide adequate staff availability for scheduled caseload. Supervise and assist various specialty Lead RN's as needed. Ensure desired level of Productivity is achieved through appropriate staffing levels, monitor for correct clocking practices, and ensuring that specialty Lead RN's are held accountable for their employees accomplishing their assigned duties. Be available for Phone calls and act as a liaison for the surgery department during off hours to aid in managing the Surgery Schedule and employee issues that may present themselves. Organizes, develops, implements, and modifies schedule planning and schedule administration program based on facility goals and objectives in conjunction with the ADSS. Collaborates with Education Coordinator to identify and facilitate staff developmental needs as they relate to schedule planning and administration. Contributes to development of QI standards for schedule planning and administration with subsequent implementation and maintenance of ongoing program. Participates actively in departmental meetings and committees to promote professional practice; problem solving, generates ideas and promotes change. Attends in-service programs and seminars to enhance knowledge of scheduling management and clinical practice. Demonstrates understanding of unit standards, policies and procedures and relates them appropriately to personnel. Reviews and recommends procedure/policy revisions and staffing changes necessary to delivery of quality patient care. Provides for instruction on the correct care and handling of supplies and equipment to ensure their proper function. Monitors nursing operative practices, correct aseptic techniques and infection control procedures. Monitors and provides staff participation at mandatory in-service education: including Fire, Safety, Infection control, and disaster plan. Coordinates nursing and surgical scrub technician students with students' instructors. Participates with In-service for staff development. Supports and assists with staff orientation. Demonstrates positive interpersonal relations with all constituencies and cooperates harmoniously with others in the accomplishments of department's goals in meeting the needs of quality patient care. Communicates with ancillary departments to define and resolve specific problem areas and ensure continuity in patient care. Interprets patients' and surgeons' needs to all personnel and provides supervision and instruction when necessary to meet these needs perioperatively. Communicates schedule delays and changes to anesthesiology, surgeons, and nurse managers, and establishes appropriate schedule modifications. Communicates with staff, anesthesia providers, and surgeons to assess needs and problem solve. Directs concern to OR Manager. Ensures that the RN Leads are informing patient and families regarding the status of the procedure, especially in emergency and prolonged procedures, after consultation with staff physician/room staff. Be available to perform this role when RN Leads are not able. Communicates performance expectations for control desk, off-shift and holding staff. Demonstrates ability to provide clear and concise directions. Demonstrates ability to work effectively with others and promote good interpersonal rapport among others. Demonstrates win/win attitude & problem solving skills. Be available to Circulate, Scrub, and Precept as needed to assist with the department's needs. Staff perceives you to be fair, approachable, and able to facilitate positive outcomes. Regularly seeks input from physicians regarding satisfaction with level of patient care and/or quality concerns. Ensure that staff work schedule, Call schedule, and vacation schedules are out weeks in advance in order to provide adequate staffing for daily Surgery schedule. Demonstrates support for departmental and institutional leadership and Methodist Health Service Corporation. Assist with employee satisfaction. Participate with personnel and staff development: Demonstrates clinical competence and perceived as a clinical resource to staff. Maintains confidential information. Development & Patient Education Continues professional development and involvement in professional activities that enhance nursing practice by sharing knowledge through networking and research. Assess and chooses teaching strategies appropriate to the patient's and their families' age specific needs, culture, gender, readiness to learn and level of comprehension. Consults appropriate resources within the hospital to provide specialized education. Demonstrates knowledge that patient and workplace safety is a priority by preventing errors, accidents and infections and reporting potential or actual concerns immediately. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance . We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $35.42per hour - $60.92per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
01/09/2026
Full time
Overview Responsible for organizing, directing and controlling the daily OR schedule to provide quality service for the Perioperative patient. Maintains active communication among medical staff, interdepartmental staff, and operating room staff; ensures schedule progression and issue resolution. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR), Education: Bachelor's Degree: Nursing (Required), Work Experience: Specific to patient population Responsibilities Coordinates and supervises the operation of the daily surgery schedule, case assignment, room and personnel assignments. Assumes Responsibility for the operation of the Surgery Department, Sterilization Department, and Endoscopy Department when Manager is not present. Assumes daily responsibility for coordination of the surgical schedule to assure the most efficient utilization of the operating rooms. Monitor case progression to identify potential schedule changes. Assigns, coordinates and monitors utilization of personnel and facilities. Provides for the assignment of lunch and break relief for intraoperative staff. Collaborates with charge anesthesiologist to ensure that the schedule runs efficiently in accordance with policies and protocols. Provides assistance and leadership to the staff to ensure departmental objectives and assignments are accomplished as scheduled. Acts as a resource person for clinical care problems in all areas. Markets department's services and equipment to physicians. Works to maintain a positive team relationship with physicians and coworkers. Monitors/coordinates special equipment. Evaluates the level of patient care delivered in the operating room and recommends changes to ensure compliance with established standards of nursing care. Coordination of staff work and vacation schedules to provide adequate staff availability for scheduled caseload. Supervise and assist various specialty Lead RN's as needed. Ensure desired level of Productivity is achieved through appropriate staffing levels, monitor for correct clocking practices, and ensuring that specialty Lead RN's are held accountable for their employees accomplishing their assigned duties. Be available for Phone calls and act as a liaison for the surgery department during off hours to aid in managing the Surgery Schedule and employee issues that may present themselves. Organizes, develops, implements, and modifies schedule planning and schedule administration program based on facility goals and objectives in conjunction with the ADSS. Collaborates with Education Coordinator to identify and facilitate staff developmental needs as they relate to schedule planning and administration. Contributes to development of QI standards for schedule planning and administration with subsequent implementation and maintenance of ongoing program. Participates actively in departmental meetings and committees to promote professional practice; problem solving, generates ideas and promotes change. Attends in-service programs and seminars to enhance knowledge of scheduling management and clinical practice. Demonstrates understanding of unit standards, policies and procedures and relates them appropriately to personnel. Reviews and recommends procedure/policy revisions and staffing changes necessary to delivery of quality patient care. Provides for instruction on the correct care and handling of supplies and equipment to ensure their proper function. Monitors nursing operative practices, correct aseptic techniques and infection control procedures. Monitors and provides staff participation at mandatory in-service education: including Fire, Safety, Infection control, and disaster plan. Coordinates nursing and surgical scrub technician students with students' instructors. Participates with In-service for staff development. Supports and assists with staff orientation. Demonstrates positive interpersonal relations with all constituencies and cooperates harmoniously with others in the accomplishments of department's goals in meeting the needs of quality patient care. Communicates with ancillary departments to define and resolve specific problem areas and ensure continuity in patient care. Interprets patients' and surgeons' needs to all personnel and provides supervision and instruction when necessary to meet these needs perioperatively. Communicates schedule delays and changes to anesthesiology, surgeons, and nurse managers, and establishes appropriate schedule modifications. Communicates with staff, anesthesia providers, and surgeons to assess needs and problem solve. Directs concern to OR Manager. Ensures that the RN Leads are informing patient and families regarding the status of the procedure, especially in emergency and prolonged procedures, after consultation with staff physician/room staff. Be available to perform this role when RN Leads are not able. Communicates performance expectations for control desk, off-shift and holding staff. Demonstrates ability to provide clear and concise directions. Demonstrates ability to work effectively with others and promote good interpersonal rapport among others. Demonstrates win/win attitude & problem solving skills. Be available to Circulate, Scrub, and Precept as needed to assist with the department's needs. Staff perceives you to be fair, approachable, and able to facilitate positive outcomes. Regularly seeks input from physicians regarding satisfaction with level of patient care and/or quality concerns. Ensure that staff work schedule, Call schedule, and vacation schedules are out weeks in advance in order to provide adequate staffing for daily Surgery schedule. Demonstrates support for departmental and institutional leadership and Methodist Health Service Corporation. Assist with employee satisfaction. Participate with personnel and staff development: Demonstrates clinical competence and perceived as a clinical resource to staff. Maintains confidential information. Development & Patient Education Continues professional development and involvement in professional activities that enhance nursing practice by sharing knowledge through networking and research. Assess and chooses teaching strategies appropriate to the patient's and their families' age specific needs, culture, gender, readiness to learn and level of comprehension. Consults appropriate resources within the hospital to provide specialized education. Demonstrates knowledge that patient and workplace safety is a priority by preventing errors, accidents and infections and reporting potential or actual concerns immediately. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance . We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $35.42per hour - $60.92per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
Document Control Specialist / Project Officer Associate US-NY-Long Island City Job ID: Type: Regular Full-Time # of Openings: 1 Category: Construction Management The LiRo Group Overview We have an immediate need for a Project Office Associate for our Long Island City location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities Responsible for performing technical and administrative tasks related to the review of New York City permits Review documents submitted for City required building and other permits for completeness and accuracy Provide support to permit applications in completing the filing procedure with various city agencies Deliver documents to various city agencies for data entry, review and/or approval Work closely with Plan Examiners in reviewing documents for city building codes and for guaranteeing compliance Research existing building status from city records at various agencies Qualifications Must have: Bachelor's Degree in Construction Management, Engineering or Architecture 3+ years of full time expereince performing construction document review, zoning compliance, filing and facilitating permit approval and researching property status Experience in schools/education/building facilities a big+ Must be detail oriented and have the ability to work in a fast-paced environment MS Office experience required NYS Driver's License We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation Package Employee- Only Stock Purchase Plan Mentoring programs Continuing Education Program Employee referral bonus Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $60,000 Maximum: $80,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates' qualifications and location. - The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. Please visit our website for all of our career opportunities at PI3206f9b1c7c5-9881
01/09/2026
Full time
Document Control Specialist / Project Officer Associate US-NY-Long Island City Job ID: Type: Regular Full-Time # of Openings: 1 Category: Construction Management The LiRo Group Overview We have an immediate need for a Project Office Associate for our Long Island City location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities Responsible for performing technical and administrative tasks related to the review of New York City permits Review documents submitted for City required building and other permits for completeness and accuracy Provide support to permit applications in completing the filing procedure with various city agencies Deliver documents to various city agencies for data entry, review and/or approval Work closely with Plan Examiners in reviewing documents for city building codes and for guaranteeing compliance Research existing building status from city records at various agencies Qualifications Must have: Bachelor's Degree in Construction Management, Engineering or Architecture 3+ years of full time expereince performing construction document review, zoning compliance, filing and facilitating permit approval and researching property status Experience in schools/education/building facilities a big+ Must be detail oriented and have the ability to work in a fast-paced environment MS Office experience required NYS Driver's License We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation Package Employee- Only Stock Purchase Plan Mentoring programs Continuing Education Program Employee referral bonus Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $60,000 Maximum: $80,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates' qualifications and location. - The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. Please visit our website for all of our career opportunities at PI3206f9b1c7c5-9881
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
01/09/2026
Full time
Reporting to the AME Manager, this position will be responsible for managing cross-functional projects delivering a continuous improvement of our safety, quality, delivery, and cost through the elimination of waste from our production processes, launching new products/processes into operations, and by educating and empowering our production staff. As an Advanced Manufacturing Engineer II you will: Manage Manufacturing Engineering projects. Preparation of detailed project plans with estimated project task hours and timelines for development, production, validation, and launch. Will be responsible for on-time, on-budget delivery of projects Oversee research and development of new manufacturing equipment, processes, standard operating procedures, and work instructions. Improve manufacturing processes through review of all engineering deliverables for technical accuracy and adherence to engineering standards and project schedules. Interact with Design Engineering, Operations, and Supply Chain teams to ensure design for manufacturability of new products. Participates in the design review process, and acts as a liaison for products from inception through shipment to the customer Will be involved in New product launches. Review new product design and work with design engineering to identify areas for improved product manufacturability, reduced manufacturing cost, and improved process reliability. Provide manufacturing feasibility during various phases of new products and new technologies. Identify new opportunities for process improvement. Analyze capital equipment needs for new technologies and business needs. Investigate, plan, and implement such capital projects Leading Projects through detailed plans and execution on innovative change across assigned assets, both equipment upgrades and equipment optimizations. Design and implement tooling and fixtures focused on error-proofing to eliminate waste in the manufacturing process and make operations safer. Conducts/leads or participates in Process Mapping, FMEA, RIE'S and 8 Step Problem Solving, Quality Control Plan development, DFM, initiatives to promote and ensure that processes are continuously improved Assist in the hiring, training, and mentoring of manufacturing engineers and support staff to work to their full potential. Support G&W manufacturing transformation to Industry 4.0 and Advanced Automation solutions Create and improve G&W project delivery process and standard tools used in delivering Advanced Automation solutions Review and write reports, approve expenditures, enforce rules. Recommend, plan and direct installation of new equipment. Communicate and collaborate with other managers and departments. Prepare and deliver engineering-related presentations as required. Assist with other duties as assigned We are looking for someone who: Holds a Bachelor's Degree in Industrial, Manufacturing, Mechanical, or related Engineering field Has 5+ years total experience. Is computer proficient; confident with data analysis programs Possesses problem-solving skills with experience using root cause analysis techniques Can provide examples of new product production integration or significant operational improvement projects I Ideally you will also have: Project Management and Leadership Six Sigma, Red X, or other problem-solving certification CAD/CAM experience Experience working cross-functionally with all levels of the organization structure What we offer you: Typical pay is $80,000 - 94,915 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIa799e7bc2cf9-8042
01/08/2026
Full time
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIa799e7bc2cf9-8042
Description CHRISTUS Santa Rosa Hospital - Westover Hills(CSRH-WH) is a 150-bed hospital serving the fastest growing area of San Antonio. Specialized care includes orthopedic and surgical services, ICU, women's services, a newborn nursery, comprehensive cardiovascular care from diagnostics to open heart surgery, vascular lab, sleep center, emergency services, the CHRISTUS Weight Loss Institute, wound care, rehabilitation, and more. The campus also boasts an Outpatient Imaging Center and three medical plazas, one of which houses our CHRISTUS Santa Rosa Family Medicine Residency Program and CHRISTUS Santa Rosa Family Health Center. Summary: This Job meets the minimum CLIA qualifications of a Laboratory General Supervisor, and under the direction of the Laboratory Director and/or Laboratory Manager, coordinates and manages the day-to-day operations of their specific section(s) and shift(s). The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status. In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use. This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements. The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s). Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel. Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director. Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc. Plans, organizes and coordinates the work activities of assigned section(s) and shift(s). Keeps accurate attendance records on all associates; maintains time and attendance records for the department. Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail. Assists the Director/Manager in associate performance conversations that drive merit increases. Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary. Enforces all safety policies and procedures. Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor. Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records. Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained. Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care. Refers clinical problems to the laboratory director, manager, or supervisor as appropriate. Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications. Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning. Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs and adjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor. Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated. Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand. Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary. Responsible for maintaining orientation records on new associates. Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities. Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s). Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies. Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director. Oversees and enforces expectations of personnel in assigned section(s). Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s). Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc. Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof. Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department. Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served. Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required). Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values. Provides notification and documentation of critical laboratory values obtained. Calculates, enters, and/or verifies results of laboratory procedures. Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties. Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in local professional associations. Demonstrates adherence to the CORE values of CHRISTUS Health. Performs other duties as assigned. Job Requirements: Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required. Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required. 5 years of full-time primary experience in the specific section of responsibility required. Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
01/08/2026
Full time
Description CHRISTUS Santa Rosa Hospital - Westover Hills(CSRH-WH) is a 150-bed hospital serving the fastest growing area of San Antonio. Specialized care includes orthopedic and surgical services, ICU, women's services, a newborn nursery, comprehensive cardiovascular care from diagnostics to open heart surgery, vascular lab, sleep center, emergency services, the CHRISTUS Weight Loss Institute, wound care, rehabilitation, and more. The campus also boasts an Outpatient Imaging Center and three medical plazas, one of which houses our CHRISTUS Santa Rosa Family Medicine Residency Program and CHRISTUS Santa Rosa Family Health Center. Summary: This Job meets the minimum CLIA qualifications of a Laboratory General Supervisor, and under the direction of the Laboratory Director and/or Laboratory Manager, coordinates and manages the day-to-day operations of their specific section(s) and shift(s). The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status. In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use. This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements. The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s). Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel. Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director. Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc. Plans, organizes and coordinates the work activities of assigned section(s) and shift(s). Keeps accurate attendance records on all associates; maintains time and attendance records for the department. Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail. Assists the Director/Manager in associate performance conversations that drive merit increases. Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary. Enforces all safety policies and procedures. Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor. Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records. Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained. Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care. Refers clinical problems to the laboratory director, manager, or supervisor as appropriate. Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications. Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning. Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs and adjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor. Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated. Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand. Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary. Responsible for maintaining orientation records on new associates. Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities. Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s). Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies. Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director. Oversees and enforces expectations of personnel in assigned section(s). Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s). Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc. Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof. Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department. Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served. Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required). Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values. Provides notification and documentation of critical laboratory values obtained. Calculates, enters, and/or verifies results of laboratory procedures. Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties. Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in local professional associations. Demonstrates adherence to the CORE values of CHRISTUS Health. Performs other duties as assigned. Job Requirements: Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required. Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required. 5 years of full-time primary experience in the specific section of responsibility required. Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI642d91f8e6-
01/07/2026
Full time
Systems & Technical Trainer US-NJ-Jamesburg Job ID: 33745 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA Eastern Regional Office About the Role Canon U.S.A., Inc. In Jamesburg, NJ is seeking a Systems & Technical Trainer (Trainer, Technical). The Systems & Technical Trainer delivers training in his/her assigned region and works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns. Possess hardware technical expertise and provides training classes supporting internal and external customers. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Deliver training in his/her assigned region works with the curriculum development team to improve and refine training program content as well as supports other divisional objectives as management assigns Possess hardware technical expertise and provides training classes supporting internal and external customers Works with the Sr. Systems & Technical Trainer during the evolution process to ensure that he/she is delivering training program content consistently meeting the standards of the department Provides coaching and constructive feedback to the his/her students to ensure the support professionals efficiently meet course requirements Conducts dealer visits and discusses training needs and acquires feedback from dealers on current training programs and systems Seeks out new areas of development, researches competitors programs and coordinates the information with other trainers and implements key initiatives to ensure Canon's image as an imaging technology and training leader is enhanced Visit Key Dealers with or without the Education Support Services Specialist and assist in evaluating dealers training needs Promote Educational Services training initiatives and programs ex. ATSP Ensures accuracies of all training delivery programs in the regional training center Possesses specialized knowledge or skills in a particular functional area A developing professional, working towards full proficiency in the job role Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate About You: The Skills & Expertise You Bring Bachelor's degree in a relevant field (Finance, Mathematics, Engineering, or MIS discipline) or equivalent experience required, plus 3 to 5 years of related experience Strong analytical and communications skills and thorough knowledge of MS Office; functional knowledge of other analytical tools and report creation technologies preferred Must be proficient in all Learning and Training technology and systems to ensure they can provide quality feedback to students and to the curriculum development team Additionally must support other trainers in understanding and using the training technology We are providing the anticipated salary range for this role: $54,460 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI642d91f8e6-
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
01/07/2026
Full time
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
01/07/2026
Full time
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
01/07/2026
Full time
Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Compensation: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis and Lean Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate "required to operate" and "required on roles" staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change and change management, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations Management and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at . If you need assistance or an accommodation in applying, please contact our Human Resources Department at . Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.
