227 jobs found

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator, Preceptor or in collaboration with other Registered Nurses. Performs ongoing, systematic collection and analysis of patient data pre - during - post hemodialysis treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Team Leader, Charge Nurse, Supervisor or Physician as needed. Assesses, collaborates, and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with direct and ancillary patient care staff, all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. The position may require travel to training sites or other facilities. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a Team Leader or designated Nurse in Charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 9 months experience as a RN. Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification. Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Chronic/acute hemodialysis experience (preferred). Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator, Preceptor or in collaboration with other Registered Nurses. Performs ongoing, systematic collection and analysis of patient data pre - during - post hemodialysis treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Team Leader, Charge Nurse, Supervisor or Physician as needed. Assesses, collaborates, and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with direct and ancillary patient care staff, all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. The position may require travel to training sites or other facilities. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a Team Leader or designated Nurse in Charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 9 months experience as a RN. Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification. Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Chronic/acute hemodialysis experience (preferred). Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator, Preceptor or in collaboration with other Registered Nurses. Performs ongoing, systematic collection and analysis of patient data pre - during - post hemodialysis treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Team Leader, Charge Nurse, Supervisor or Physician as needed. Assesses, collaborates, and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with direct and ancillary patient care staff, all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. The position may require travel to training sites or other facilities. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a Team Leader or designated Nurse in Charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 9 months experience as a RN. Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification. Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Chronic/acute hemodialysis experience (preferred). Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 2 may be an entry level designation into the Clinical Advancement Program (CAP) for new employees who meet the RN CAP 2 criteria or attained through advancement from RN CAP 1. This position is accountable and responsible for the provision and coordination of clinically competent care including assessment planning intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team this position participates in decision-making teaching leadership functions and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy procedures standards of nursing practice state and federal regulations. Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator Preceptor or in collaboration with other Registered Nurses. Performs ongoing systematic collection and analysis of patient data pre - during - post hemodialysis treatment for assigned patients and documents in the patient medical record makes adjustments or modifications to treatment plan as indicated and notifies Team Leader Charge Nurse Supervisor or Physician as needed. Assesses collaborates and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides in collaboration with direct and ancillary patient care staff all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s) and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource leader coach mentor and role model for new and incumbent employees by setting examples of appropriate behavior work habits and attitudes towards patients co-workers supervisors and the company at the facility and area level. Ensures correct laboratory collection processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Participates in education and quality improvement projects at the facility and area level as directed by Supervisor. May serve as a Preceptor to new employees. Required to complete CAP requirements to maintain or advance. Performs all other duties as assigned by Supervisor PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move with assistance machines and equipment of up to 200 lbs. and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Day to day work includes desk work computer work and interaction with patients facility/hospital staff and physicians. The position may require travel to training sites or other facilities. May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians LVN/LPNs/RNs as a Team Leader or designated Nurse in Charge after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with minimum of 2 years of Nephrology Nursing experience Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. " EOE, disability/veterans

Paid one on one training and education provided Empower, engage and train dialysis patients on peritoneal and home hemodialysis using state of the art training programs and equipment Primarily works in the clinic setting and conducts initial home visits with another staff member present Position functions as an onsite Patient Educator and Case Manager for patients with various shifts and work hours PURPOSE AND SCOPE: The registered professional nurse Home Therapies RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. Assesses and manages patients' response to home dialysis training and treatment therapy by following prescribed predetermined protocols and communicates patient related issues to the physician as needed. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor with guidance from the Educator, Preceptor or in collaboration with another Registered Nurse. Performs ongoing, systematic collection and analysis of dialysis data for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor or physician as needed. Assesses, collaborates and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with the patient, home care partner, direct and ancillary patient care staff, all aspects of the provision of safe and effective delivery of dialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Assists in the identification, evaluation, selection and education of Home Dialysis candidates and Home Partners. Performs assessment and identifies barriers of the Home Dialysis candidate's home environment and partner / family readiness and ability to perform dialysis treatments in the home. Trains Home Dialysis patients and / or Home Partners on the safe, effective operation and maintenance of all Home Dialysis equipment and treatment supplies through an organized and formal Home Dialysis Training Program. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of equipment, patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Rotates coverage with other licensed home therapies staff as assigned to ensure reliable and adequate coverage. Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs. The position may require travel to training sites, other facilities or patient homes. May be asked to provide essential functions of this position in other locations including patient's home with the same physical demands and working conditions as described above. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. SUPERVISION: Assigned oversight of LPNs/LVNs, RNs, Patient Care Technicians and Home Therapy Care Team Assistants as a Team Leader or designated Nurse in charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 12 months experience as a RN. Successful completion of 3 months experience as a RN in home peritoneal dialysis and / or hemodialysis. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Minimum of 1-year experience as a Registered Nurse (preferred) Home dialysis therapy experience (preferred). ACKNOWLEDGEMENT: I acknowledge that I have read and accepted this job description. I understand what is expected of me in this position, and I am able to perform the essential functions as outlined with or without reasonable accommodation. Furthermore, I understand that the duties and responsibilities listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. If I have any questions about duties and responsibilities not specified in this job description that I am asked to perform, I should discuss them with my immediate Supervisor or my Human Resources representative. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Paid one on one training and education provided Empower, engage and train dialysis patients on peritoneal and home hemodialysis using state of the art training programs and equipment Primarily works in the clinic setting and conducts initial home visits with another staff member present Position functions as an onsite Patient Educator and Case Manager for patients with various shifts and work hours PURPOSE AND SCOPE: The registered professional nurse Home Therapies RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. Assesses and manages patients' response to home dialysis training and treatment therapy by following prescribed predetermined protocols and communicates patient related issues to the physician as needed. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. Performs all essential functions under the direction of the Supervisor with guidance from the Educator, Preceptor or in collaboration with another Registered Nurse. Performs ongoing, systematic collection and analysis of dialysis data for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor or physician as needed. Assesses, collaborates and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family. Directs and provides, in collaboration with the patient, home care partner, direct and ancillary patient care staff, all aspects of the provision of safe and effective delivery of dialysis therapy to assigned patients. Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. Initiates or assists with emergency response measures. Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. Ensures patient awareness related to transplant and treatment modality options. Assists in the identification, evaluation, selection and education of Home Dialysis candidates and Home Partners. Performs assessment and identifies barriers of the Home Dialysis candidate's home environment and partner / family readiness and ability to perform dialysis treatments in the home. Trains Home Dialysis patients and / or Home Partners on the safe, effective operation and maintenance of all Home Dialysis equipment and treatment supplies through an organized and formal Home Dialysis Training Program. Required to complete CAP requirements to advance. Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position provides direct patient care that regularly involves heavy lifting, moving of equipment, patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Rotates coverage with other licensed home therapies staff as assigned to ensure reliable and adequate coverage. Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs. The position may require travel to training sites, other facilities or patient homes. May be asked to provide essential functions of this position in other locations including patient's home with the same physical demands and working conditions as described above. Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. SUPERVISION: Assigned oversight of LPNs/LVNs, RNs, Patient Care Technicians and Home Therapy Care Team Assistants as a Team Leader or designated Nurse in charge, after meeting all the following: Successful completion of all FKC education and training requirements for new employees. Must have a minimum of 12 months experience as a RN. Successful completion of 3 months experience as a RN in home peritoneal dialysis and / or hemodialysis. EDUCATION and LICENSURE: Graduate of an accredited School of Nursing. Current appropriate state licensure. Current or successful completion of CPR BLS Certification Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. Minimum of 1-year experience as a Registered Nurse (preferred) Home dialysis therapy experience (preferred). ACKNOWLEDGEMENT: I acknowledge that I have read and accepted this job description. I understand what is expected of me in this position, and I am able to perform the essential functions as outlined with or without reasonable accommodation. Furthermore, I understand that the duties and responsibilities listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. If I have any questions about duties and responsibilities not specified in this job description that I am asked to perform, I should discuss them with my immediate Supervisor or my Human Resources representative. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us! Boeing Test and Evaluation (BT&E) is seeking a Instrumentation Technician C to join our teams in Seattle, WA. In this role, you will work with blueprints, schematics, technical manuals and bulletins, National Bureau of Standards, manufacturers' specifications, oral and written instructions. You will be installing instrumentation, primarily strain gauges and thermocouples on all models of Boeing aircraft civilian, military and space. Position Responsibilities: Receive work assignment from team leader or supervisor and obtain necessary materials and equipment Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields Perform modification of test equipment to meet engineering configuration, as required Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required Use shop tools and any test equipment required to complete work assignment Write tie-ins, and maintain records such as work log for areas/equipment as required Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required Pack electronic equipment for travel as required per drawing and Boeing applicable specifications Check work after completion of each operation to be sure job is per drawing or other instructions Put completed job or reworked job up for inspection as required Contact team leader/supervisor/engineer/planner when assistance is needed (e.g. if there is questions about drawings or paperwork, if drawings and paperwork do not match, or when any other problem arises) Maintain personal and tool certifications, as required Comply with applicable tool control policies Effectively accomplishing the tasks, duties and responsibilities of this job requires at least these attributes Ability to use precision measuring tools and test equipment and interpret results Knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies, per the appropriate electrical codes Knowledge of aircraft electrical and mechanical systems Ability to calculate and apply advanced mathematics Know and interpret data from a coordinate system to identify multiple axis and dimensional references (3-D) Ability to set up and operate floor mounted hydraulic and/or mechanical operated equipment Ability to demonstrate entry level competency in operation of PIT (Power Industrial Trucks), in a safe manner as required Ability to safely operate various types of hand tools and/or hand-held power tools as required Effectively communicate information Knowledge of basic electricity and electrical systems Operate various types of test equipment, perform testing and interpret results, as required Knowledge of proper use, handling, and disposal of hazardous materials/chemicals, oils, coolants, and lubricants per government regulations and Boeing procedures Travel up to 10% of the time, both domestically and internationally. The following Physical Demands may be requirements of this job: Frequent (3-6 Hrs.) Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking Occasional (1-3 Hrs.) Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) The following Chemicals/Materials may be requirements of this job: Frequent (3-6 Hrs.) Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) Occasional (1-3 Hrs.) Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) The following Environmental Conditions may be requirements of this job: Continuous (6-8 Hrs.) Noise (constant or intermittent sounds or pitch) Frequent (3-6 Hrs.) Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) Occasional (1-3 Hrs.) Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) The following Personal Protective Equipment may be requirements of this job: Continuous (6-8 Hrs.) Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) Frequent (3-6 Hrs.) Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): 1+ year of experience reading and interpreting wire harness diagrams and installation schematics 1+ year of experience in electrical (wire shop) fabrication and required processes Preferred Qualifications (Desired Skills/Experience): 3+ years of strain gaging experience 3+ years of experience in Aircraft Electrical systems Certification(s) in: Electrical (Crimping, Bond and Ground); Mechanical (Fork lift, Hand truck, Pressure/vacuum); or Safety (Electrical, Egress, Explosives) Shift: This position is for 1st shift. This position may require travel up to 10% of the time, both domestically and internationally. Union: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $27.32/hour - $57.88/hour Applications for this position will be accepted until Jan. 10, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington. As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures. Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight). Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures. Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments. Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance. Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules. Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance. Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions. Create production aids as needed to facilitate inspection assignments. Maintain necessary certifications, licenses, and permits required for the role. Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights up to 35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications: 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Must be willing to work any shift; including days, evenings, nights, and weekends. Preferred Qualifications: FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified. 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 12, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.