26 jobs found

Field Service Engineer II US-CA-San Jose Job ID: 33523 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations. This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time.Troubleshoot hardware and software related issues and implement solutionsCollect data for software related issues and discuss with headquarter in Japan.Accurately document all maintenance activity and provide field service reports.Install equipment control software and maintain record of software revision history.Participate in the installation of equipment at customers' sites.Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work.Provide training and assistance to other technicians.Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees,Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring HS Diploma, GED, or equivalent experience required. AA OR BS degree in a related field is preferred, plus 1-2 years of related experience (i.e. FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferredAbility to understand electrical and mechanical drawings for troubleshootingExperience with PLC and other software applications is a plusAbility to work independently following 3-6 months of on the job trainingMust have analytical skills for problem analysis and resolutionDecide on problem solving road map and follow methodical means to resolutionDecide and recommend spare and consumable parts for PM's and repairsJob may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesPosition may require ability to work flexible shiftsRequires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $29.20 - $43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIf0cc4a648a6e-1192

Description: DUTIES AND RESPONSIBILITIES Responsible for supervising the Metrology technical personnel calibrating variety of test instruments for one or more skill areas, such as: Ø Electrical Equipment Ø Dimensional Equipment Ø Industrial / Mechanical Equipment Ø Temperature Equipment Ø RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Capable in developing formal plans for facilities and equipment, personnel training and certification, measurement standards and traceability. Ability to recognize and address non-conformances and file Corrective Action Reports. Provide administration in all areas of service to facilitate both quality and quick turnaround. Capable in conducting workshops and classes for personnel / technician training. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Ensure that environmental conditions are adequate for the work performed. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the customer is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the client to operate and / or calibrate the client's equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessment as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Lab Manager has the authority and resources needed to carry out their duties, including: Implementation, maintenance and improvement of the management system; Identification of deviations from the management system or from the procedures for performing laboratory activities; Initiation of actions to prevent or minimize such deviations; Reporting to laboratory management on the performance of the management system and any need for improvement; Ensuring the effectiveness of laboratory activities. Ability to write procedures, train personnel, capable in managing company instrumentation, good housekeeping skills, capable in computer database management for company instruments. Responsible for the control of standards maintenance and intermediate checks of company equipment. Travels regionally or out of the country to perform field calibration work. Assists in the planning and scheduling of calibration workload when input is deemed necessary. Coordinates and responds promptly to customer inquiries and provides technical support and advice as required; coordination should be supported with factual information. Maintains accurate records of all activities and prepares technical reports with recommendation as applicable. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes Observes safety precautions and quality standard in the performance of task and complies with the company directives and policies; observes proper communication practices and manages confidentiality of information within and outside the group If the Lab Manager does not meet Tech 3 Dimensional and Electrical requirements, then there must be another technician at a Tech 3 Dimensional level that can report to the Lab Manager. Requirements: The professional qualifications required and the experience necessary to effectively complete the responsibilities of this position. Education: - Educational attainment gained from Technical or other related courses, preferably in Metrology, Instrumentation, Electronics or its equivalent. Training: - Complete the QMS exams 101, 102, 103, 104, 105, 201 and 401 with 70% minimum score. - ESDC Teamsite Module, to be completed within 3 days of commencing employment. - System / Software development system / Software modification. - Qualification and Certification. - -Basic Trouble Shooting and Repair Techniques. Work Experience: - Minimum 7 years of metrology experience and/or years of audit/ quality experience. - Meets all requirements of either an Electronic or Dimensional Supervisor. Knowledge, Skills and Ability: Demonstrates good verbal communication, good written skills Knowledgeable in calibration procedures, computation of uncertainty and computer applications. Must have keen eye for quality and details, basic problem solving techniques. Familiar with techniques and tools associated with ISO/IEC 17025. Team player, Trustworthy, Service oriented and can manage priorities. Ability to drive four-wheel vehicle (w/ valid driver's license) is an advantage. PI4a619f44454b-0875

Overview To be part of our organization, every employee should understand and share in the YNHHS Vision, support our Mission, and live our Values. These values - integrity, patient-centered, respect, accountability, and compassion - must guide what we do, as individuals and professionals, every day. Assesses, implements and coordinates the Respiratory Care Plan for inpatients and outpatients. Operates a wide variety of complex technical equipment for diagnostic and therapeutic purposes. Continuously monitors therapy, therapeutic response and the disease process being treated and makes appropriate and timely revisions and modifications to the treatment plan in consult with the interns, residents, attending physicians and pulmonary physiologist. In addition to general Respiratory Therapy responsibilities, the Sr. Registered Respiratory Therapist role supports specialized complex functions within the Cardiac Catheterization Laboratory Pulmonary Lab and/or the Sleep Laboratory. EEO/AA/Disability/Veteran Responsibilities 1. Able to perform a wide variety of complex clinical and technical tasks according to the standards set forth in the Departmental Procedure manual. 2. Maintains complete and timely documentation in all job aspects, including all facets of the medical record and all departmental statistical records. Part-time and per diem employees may be restricted in some procedures as determined by the Manager and/or Medical director and noted on the Orientation Checklist and demonstrated in Competency Testing 3. Maintains an accurate and current awareness of all departmental and hospital policies and procedures as evidenced in clinical competencies, attendance at departmental in-services, review and compliance with all communication sheet entries, announcements and memoranda pertinent to the operation of the department. 4. The staff member must be able to demonstrate the knowledge and skills necessary to provide care appropriate to the age of the patients served on his or her assigned unit. The individual must demonstrate knowledge of the principles of growth and development over the life span and possess the ability to assess data reflective of the patient's status and interpret the appropriate information needed to identify each patient's requirements relative to his or her age-specific needs, and to provide the care needed as described in the department's policies and procedures 5. CATH LAB SPECIFIC: Operates a wide variety of complex technical equipment for diagnostic and therapeutic purposes in the Cardiac Catheterization Laboratory. Continuously monitors patient and response and makes appropriate suggestions to the cardiologist and/or angiographer. Assists the cardiologist and/or angiographer during the performance of cardiac catheterization with and without angioplasty. Understands all technical aspects of Cardiac Catheterization and Primary Cardiac Angioplasty. 6. SLEEP LAB SPECIFIC: Under the general supervision of the Sleep Medical Director perform various in and out of lab sleep testing to provide comprehensive evaluation and treatment of sleep disorders. Knowledge and understanding of indications and contraindications for noninvasive ventilation and oxygen therapy. Educate patients as needed on sleep disease processes and current therapies that are being utilized. Coordinates quality assurance data collection and other daily processes including a variety of duties to support the operations of the department. Able to perform the duties defined for a sleep technician and able to provide oversight of other sleep center staff as needed. Qualifications EDUCATION Associates degree in Respiratory Therapy, NBRC approved college or equivalent required, B.S. preferred. Four weeks training in Cardiac Catheterization and Primary Angioplasty and 6 months on-the-job training, two years of sleep lab experience. Ongoing education in the field of sleep medicine and continuing education units annually as defined by the AASM for technologists in an accredited sleep program; must additionally meet all BRPT and AASM educational requirements. Ongoing education and continuing education units to maintain CPFT/RPFT credential. Ongoing education with specialized bronchoscopy procedures. EXPERIENCE One year in-hospital clinical practice experience. One year in sub-specialty area (Cardiac Catheterization, Pulmonary Lab Sleep Lab, Bronchoscopy) LICENSURE Registered by the National Board for Respiratory Therapy. Basic Life Support Certificate by American Heart Association. Advanced Cardiac Life Support Certificate by American Heart Association. Licensed by the State of Connecticut in Respiratory Therapy. Certification in Arterial Blood Gas Sampling. Registered in Cardiac Invasive Specialties by Cardiac Credentialing International (RCIS - CCI) preferred. For Sleep Lab, Registered Polysomnographic Technologist (RPSGT) certification required through the BRPT (Board of Registered Polysomnographic Technologists). For Pulmonary Lab CPFT required, RPFT preferred. Must obtain CPFT within 6 months of hire for Pulmonary Lab. Must obtain RPSGT within 6 months of hire for Sleep Lab SPECIAL SKILLS Work with patients comprises great majority of job role. Patient condition varies from healthy outpatients to severely ill intensive care patients. Frequent contact with patients' families and visitors. Extensive daily interaction with medical staff, including nurses, interns, residents, and attending physicians. Occasional contact with other hospital personnel. Education and competency with others in the department. PHYSICAL DEMAND Administers tests and/or therapy in a standing position (75%). Able to respond to emergencies with rapid dispatch, including the ability to walk up to 7 flights of stairs. Bending to angles greater than 45 degrees. Lifting, pulling and pushing objects up to 40 pounds. Transports equipment weighing up to 300 pounds on rollers. Able to move patients weighing up to 300 pounds with assistance using proper body mechanics and equipment. Able to perform prolonged cardiopulmonary resuscitation. Exposure to respiratory and other pathogens including drug resistant strains of tuberculosis and A. Staph, HIV, and hepatitis B. Exposure to blood and body fluids. Exposure to pentamidine, ribovirin, radiation and other potentially harmful substances listed in the MSDS. YNHHS Requisition ID 161837

Field Service Engineer II US-CA-San Jose Job ID: 33523 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations.This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time.Troubleshoot hardware and software related issues and implement solutionsCollect data for software related issues and discuss with headquarter in Japan.Accurately document all maintenance activity and provide field service reports.Install equipment control software and maintain record of software revision history.Participate in the installation of equipment at customers' sites.Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work.Provide training and assistance to other technicians.Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees,Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring HS Diploma, GED, or equivalent experience required. AA OR BS degree in a related field is preferred, plus 1-2 years of related experience (i.e. FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferredAbility to understand electrical and mechanical drawings for troubleshootingExperience with PLC and other software applications is a plusAbility to work independently following 3-6 months of on the job trainingMust have analytical skills for problem analysis and resolutionDecide on problem solving road map and follow methodical means to resolutionDecide and recommend spare and consumable parts for PM's and repairsJob may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesPosition may require ability to work flexible shiftsRequires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $29.20 - $43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI5a18cef67cd3-1192

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging: At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description About the Role: Maintain plant equipment and machinery to ensure optimal working condition while driving continuous improvements aligned with operational priorities. Perform timely and effective root cause analysis to resolve equipment failures, enhancing efficiency, quality, and overall reliability. Assist in diagnosing and repairing mechanical issues across a range of plant equipment, including conveyors, pallet handling systems, and other manufacturing machinery. Key Responsibilities may include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician I Day Shift to join our team in Beech Island, SC. As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee ' s health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. Key Accountabilities - What you will do M aintaining and repairing plant production equipment . D iagnose and repair mechanical and electrical failures in all plant manufacturing equipment : conveyers, process pallet handling machines, dismantling, painting and stenciling systems. Perform proactive and reactive maintenance activities ensuring strict adherence to health and safety protocols . Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks in the CMMS ( Computerized Maintenance Management System) . E nsur e compliance with health and safety regulations and contributing to overall plant performance. Experience - What you will bring Day shift with flexibility for on call as needed 3-5 years of experience in industrial machine maintenance. Ability to read and use mechanical and electrical schematics for troubleshooting. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Preventative and corrective Maintenance on conveyance equipment . Ability to climb steps over conveyor system, work in tight spaces as well as at heights. Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. Ability to use Computerized Maintenance Management Systems (CMMS). Skills & Knowledge Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic ( RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience NEC 70E Electrical Safety Mechanical Knowledge Chain Drive Live Roller Conveyor and Belt Conveyor systems Hydraulics pumps and circuits Air compressors Pneumatic circuits valves What we Offer: Competitive Pay w/ Shift Differential Benefits Day 1! 401K w/ company match (up to 4%) F REE company-paid vision, short-term disability, and life insurance FREE company-provided PPE and safety equipment Tuition reimbursement, parental leave, childcare assistance , profit sharing, and MORE! Location: Sits on a customer location Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer, and we are committed to developing a diverse workforce in which everyone is treated fairly, with respect, and has the opportunity to contribute to business success while realizing his or her potential. This means harnessing the unique skills and experience that each individual brings and we do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Individuals fraudulently misrepresenting themselves as Brambles or CHEP representatives have scheduled interviews and offered fraudulent employment opportunities with the intent to commit identity theft or solicit money. Brambles and CHEP never conduct interviews via online chat or request money as a term of employment. If you have a question as to the legitimacy of an interview or job offer, please contact us at .

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description About the Role: Maintain plant equipment and machinery to ensure optimal working condition while driving continuous improvements aligned with operational priorities. Perform timely and effective root cause analysis to resolve equipment failures, enhancing efficiency, quality, and overall reliability. Assist in diagnosing and repairing mechanical issues across a range of plant equipment, including conveyors, pallet handling systems, and other manufacturing machinery. Key Responsibilities may include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician I Day Shift to join our team in Beech Island, SC. As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee ' s health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. Key Accountabilities - What you will do M aintaining and repairing plant production equipment . D iagnose and repair mechanical and electrical failures in all plant manufacturing equipment : conveyers, process pallet handling machines, dismantling, painting and stenciling systems. Perform proactive and reactive maintenance activities ensuring strict adherence to health and safety protocols . Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks in the CMMS ( Computerized Maintenance Management System) . E nsur e compliance with health and safety regulations and contributing to overall plant performance. Experience - What you will bring Day shift with flexibility for on call as needed 3-5 years of experience in industrial machine maintenance. Ability to read and use mechanical and electrical schematics for troubleshooting. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Preventative and corrective Maintenance on conveyance equipment . Ability to climb steps over conveyor system, work in tight spaces as well as at heights. Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. Ability to use Computerized Maintenance Management Systems (CMMS). Skills & Knowledge Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic ( RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience NEC 70E Electrical Safety Mechanical Knowledge Chain Drive Live Roller Conveyor and Belt Conveyor systems Hydraulics pumps and circuits Air compressors Pneumatic circuits valves What we Offer: Competitive Pay w/ Shift Differential Benefits Day 1! 401K w/ company match (up to 4%) F REE company-paid vision, short-term disability, and life insurance FREE company-provided PPE and safety equipment Tuition reimbursement, parental leave, childcare assistance , profit sharing, and MORE! Location: Sits on a customer location Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer, and we are committed to developing a diverse workforce in which everyone is treated fairly, with respect, and has the opportunity to contribute to business success while realizing his or her potential. This means harnessing the unique skills and experience that each individual brings and we do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Individuals fraudulently misrepresenting themselves as Brambles or CHEP representatives have scheduled interviews and offered fraudulent employment opportunities with the intent to commit identity theft or solicit money. Brambles and CHEP never conduct interviews via online chat or request money as a term of employment. If you have a question as to the legitimacy of an interview or job offer, please contact us at .

At Vertiv, we design, manufacture, and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture Company leaders have many years of hands-on Field Service experience in this industry and many others Tremendous focus is placed on employee technical and leadership development Technical Training takes place in our state of the art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning Competitive benefits include: Company vehicle, smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k, Profit Sharing, & Generous PTO/Vacation Plan, Medical, Vision & Dental & more Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides Company-wide commitment to promoting a strong work/life balance An employer-of-choice for Veterans with technical backgrounds The Field Service Technician is primarily responsible for scheduled and remedial (break-fix) service on Small to Medium UPS, Power Distribution Units & Battery system products (2-120KVA) serviced by Vertiv, commensurate with appropriate classroom and on-the-job training. The Field Service Technician is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Field Service Technician is primarily responsible to support products and services sold to our "Edge" market segment, including retail, financial, and municipal customers. RESPONSIBILITIES: ROLE Perform service tasks as assigned and as per company policies and procedures Capable of working under direct supervision or independently based upon training completion Render on-site and phone assistance to customers Communicate with Technical Support on technical or procedural issues Implement Field Change Notices per published guidelines Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY Operate in a safe manner in accordance with published safety guidelines Maintain and operate company vehicle in accordance with local laws and company policy Must wear appropriate PPE as per company guidelines and accordance with job duties Adhere to work hours policy guidelines - "14 hours rule" Report all work related accidents or injuries within 24 hours to the appropriate personnel. ADMINISTRATION Complete accurate and timely administrative tasks (i.e. Time cards, expense report, mileage reports, Service Request task closure, service reports) per company guidelines Maintain individual inventory and perform cycle counts in accordance with company policy Maintain company property (company vehicle, credit cards, PPE, test equipment, laptop, etc.) per company policies CUSTOMER SATISFACTION Provide proper and adequate communication to internal and external customers Provide estimated time of arrival to the customer where applicable Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each assignment Strive to provide all customers a "first time fix" for their equipment Maintain customer satisfaction rates per company guidelines Attend Customer Meetings as required PERFORMANCE Maximize productivity by combining service opportunities Complete all technical and administrative work in an efficient and timely manner Capable of making technical and commercial decisions under pressure Properly evaluate site and equipment for appropriate billing status Maintain productive utilization rate per company guidelines Perform inventory cycle counts per company guidelines Adhere to company dress code and safety regulations Meet or exceed on-site response time requirements for each customer Understand and comply with company startup/escalation processes and procedures Maintain proper and adequate level of internal communications QUALIFICATIONS Experience (one or more of the following) ASEET or AMEET, or progress towards, is preferred High School or Vocational School Diploma 2-4 years military experience in a related technical field 0-2 years of relevant industry experience Interpersonal and Administrative Skills Communicate professionally and respectfully in both written and verbal forms Manage time effectively by prioritizing and balancing technical tasks with administrative tasks Collaborative with peers, customers, suppliers, and leadership Complete administrative tasks (i.e. report writing, time entry, expense reporting, material debriefing, inventory counting, etc.) in a timely fashion Technical skills Make basic site evaluation skills to include: environmental temperature, and general operating conditions Familiarity with electrical / electronic test equipment and fundamentals Follow written technical documentation (i.e. procedures and product manuals) to perform service tasks Employ elementary fix/repair techniques based on directed supervision Complete service tasks and return unit to full operating conditions based upon directed supervision Summarize and report all work related tasks performed in written and verbal form Efficient with a personal computer and associated applications (Microsoft Office, Vertiv software, etc.) WORKING CONDITIONS: Travel is required Flexible schedules (weekends, evenings, and holidays) Valid driver's license Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to . click apply for full job details

At Vertiv, we design, manufacture, and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture Company leaders have many years of hands-on Field Service experience in this industry and many others Tremendous focus is placed on employee technical and leadership development Technical Training takes place in our state of the art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning Competitive benefits include: Company vehicle, smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k, Profit Sharing, & Generous PTO/Vacation Plan, Medical, Vision & Dental & more Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides Company-wide commitment to promoting a strong work/life balance An employer-of-choice for Veterans with technical backgrounds The Field Service Technician is primarily responsible for scheduled and remedial (break-fix) service on Small to Medium UPS, Power Distribution Units & Battery system products (2-120KVA) serviced by Vertiv, commensurate with appropriate classroom and on-the-job training. The Field Service Technician is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Field Service Technician is primarily responsible to support products and services sold to our "Edge" market segment, including retail, financial, and municipal customers. RESPONSIBILITIES: ROLE Perform service tasks as assigned and as per company policies and procedures Capable of working under direct supervision or independently based upon training completion Render on-site and phone assistance to customers Communicate with Technical Support on technical or procedural issues Implement Field Change Notices per published guidelines Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY Operate in a safe manner in accordance with published safety guidelines Maintain and operate company vehicle in accordance with local laws and company policy Must wear appropriate PPE as per company guidelines and accordance with job duties Adhere to work hours policy guidelines - "14 hours rule" Report all work related accidents or injuries within 24 hours to the appropriate personnel. ADMINISTRATION Complete accurate and timely administrative tasks (i.e. Time cards, expense report, mileage reports, Service Request task closure, service reports) per company guidelines Maintain individual inventory and perform cycle counts in accordance with company policy Maintain company property (company vehicle, credit cards, PPE, test equipment, laptop, etc.) per company policies CUSTOMER SATISFACTION Provide proper and adequate communication to internal and external customers Provide estimated time of arrival to the customer where applicable Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each assignment Strive to provide all customers a "first time fix" for their equipment Maintain customer satisfaction rates per company guidelines Attend Customer Meetings as required PERFORMANCE Maximize productivity by combining service opportunities Complete all technical and administrative work in an efficient and timely manner Capable of making technical and commercial decisions under pressure Properly evaluate site and equipment for appropriate billing status Maintain productive utilization rate per company guidelines Perform inventory cycle counts per company guidelines Adhere to company dress code and safety regulations Meet or exceed on-site response time requirements for each customer Understand and comply with company startup/escalation processes and procedures Maintain proper and adequate level of internal communications QUALIFICATIONS Experience (one or more of the following) ASEET or AMEET, or progress towards, is preferred High School or Vocational School Diploma 2-4 years military experience in a related technical field 0-2 years of relevant industry experience Interpersonal and Administrative Skills Communicate professionally and respectfully in both written and verbal forms Manage time effectively by prioritizing and balancing technical tasks with administrative tasks Collaborative with peers, customers, suppliers, and leadership Complete administrative tasks (i.e. report writing, time entry, expense reporting, material debriefing, inventory counting, etc.) in a timely fashion Technical skills Make basic site evaluation skills to include: environmental temperature, and general operating conditions Familiarity with electrical / electronic test equipment and fundamentals Follow written technical documentation (i.e. procedures and product manuals) to perform service tasks Employ elementary fix/repair techniques based on directed supervision Complete service tasks and return unit to full operating conditions based upon directed supervision Summarize and report all work related tasks performed in written and verbal form Efficient with a personal computer and associated applications (Microsoft Office, Vertiv software, etc.) WORKING CONDITIONS: Travel is required Flexible schedules (weekends, evenings, and holidays) Valid driver's license Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to . click apply for full job details