592 jobs found

Overview Bowhead seeks a Lead VTC Engineer to support our customer on the PICRD II contract in Colorado Springs, CO. Responsibilities • Plan and Oversee installations (specifically relating to AV Control System Programming and testing), operate, and maintain video conferencing equipment on NIPR, SIPR and JWICS networks. • Oversee VTC support team in maintaining the video conferencing-unique hardware, software, and peripherals. (e.g., CODEC, AV, Gateways, TMS, Monitors, Projectors, AMX Panels) • Maintain currency with advancing technologies and provide recommendations for new technologies, including technology refresh, to the Government • Program and configure Extron, Crestron, AMX, and BIAMP systems for advanced AV deployments • Perform rack-level system configuration and testing and conduct troubleshooting and system validation for complex AV environments • Collaborate with project managers, field engineers, and design teams to ensure successful deployments and day-to-day customer AV/VTC sessions • Provide timely programming updates for Extron and Crestron systems in response to outages and as project requirements evolve • Maintain accurate technical documentation, configuration files, commissioning reports and ensure systems comply with applicable DoD and DISA standards • Provide oversight of daily AV/VTC operations across NIPR, SIPR, and JWICS networks • Lead troubleshooting and resolution efforts for escalated AV/VTC issues, providing root cause analysis and system-level remediation • Interface with government leadership and external vendors to ensure operational continuity and technology alignment • Mentor and train junior AV/VTC personnel; provide advanced technical guidance and support • Support the creation and maintenance of SOPs and security documentation for AV/VTC operations Qualifications • A BS degree in Information Technology, Cybersecurity, Data Science, Information Systems, or Computer Science • Minimum of 10 years advanced experience in engineering and installing VTC/AV systems and with Crestron/Extron and AMX control programming and DSP audio installation for AV/VTC systems • Experience supporting and maintaining VTC/AV equipment and scheduling on the NIPRNET, SIPRNET, COE JWICS, GWAN, and GOLD networks • Excellent customer service skills including customer relationships, responsiveness, timely resolution of customer issues, and the ability to problem-solve creatively in time-sensitive situations • Core and Additional Knowledge, Skills, and Abilities Tasks (KSATs) defined in the DoD Cyber Workforce Framework for Work Role 411 (Intermediate) CERTIFICATION REQUIREMENTS: • Comp TIA Security + and at least one of the following: Crestron Certified Programmer (CCP) Certification, Extron Authorized Programmer (EAP) Certification, Crestron Technician Certification, Extron Control Professional Certification, Extron Network AV Specialist • Python 3.x proficiency and Thinklogical Technology 300 are highly desired SECURITY CLEARANCE REQUIRED: Must currently hold a Top Secret security clearance with SCI eligibility. Physical Demands: • Must be able to lift up to 25 pounds • Must be able to stand and walk for prolonged amounts of time • Must be able to twist, bend and squat periodically

The Fire Extinguisher Technician is responsible for performing scheduled or unscheduled maintenance on fire extinguishers in both residential and commercial spaces. This position is located out of our Charleston South Carolina district office. JOB RESPONSIBILITIES: Performance of daily, weekly, monthly and/or annual inspections and preventative maintenance services on various sized fire extinguishersRepair, replace, fill and tag all fire extinguishersService and test fire extinguishersComplete electronic and/or handwritten inspection reports Document time worked as well as all paperwork relating to assigned tasks in a timely manner Assist the scheduling and completion of assigned duties Ability to work independently and use provided personal protective equipmentJOB REQUIREMENTS: High school diploma or equivalent Fire Extinguisher experience requiredPossess an understanding of NFPA and building and fire codes Willing to communicate effectively; both verbally and written Possess a valid driver's licenseProfessional appearance By applying, you consent to your information being transmitted by Veritone to the Employer, as data controller, through the Employer's data processor SonicJobs. See Impact Fire Services Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at PandoLogic. Category:Installation & Maintenance,

Job Description Job Title: Master Automotive Technician / Mechanic Location: 1515 FM 646 Rd, League City, TX 77573 Job Overview: We are looking for automotive technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for must seek solutions to tough problems with a strong passion for doing what's right for our guests. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Honestly assess vehicles and document detailed recommendations of necessary repairs and manufacturer's maintenance recommendations Maintain professionalism while addressing all customer concerns Review TSB's and other service recommendations and translate them to the customer's needs Politely and professionally communicate cause and correction for our guest concerns regarding their vehicle Complete wheel and tire replacements as needed Follow and promote our high standards of safety, cleanliness, and organization Responsible for keeping the branded repair vehicle clean and presentable at all times Master MFG-level diagnostic tools (MFG scan tools and subscriptions are provided by CBA) Qualifications Qualifications: Positive attitude and a desire to serve our guest 5+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Must have sufficient knowledge of traffic laws, understand them and follow them Aptitude for learning additional skills and processes Must have a valid driver's license and a clean driving record Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive,

About the Opportunity: • Job Title: Maintenance Technician • Pay Rate Range: $30.00-$35.00/Hour • Location: Jordan, MN • Schedule: 2nd Shift Monday-Friday 3PM-11PM • Position Type: Temp to Hire Requirements and Qualifications: 1. Education/certification or experience with welding. 2. 5 years of experience performing maintenance in a production setting, concrete plants especially. 3. Not afraid to get dirty during their shift. Grease, dirt, and dust. 4. Experience or education in welding is required. 5. Ability to operate, or willingness to learn forklifts. 6. Experience working with concrete production machines. 7. Have any experience in robotics, programming, electronics, or hydraulics is desired but not required. 8. Ability to lift up to 50lbs. Duties and Responsibilities: 1. Perform routine maintenance tasks on automated concrete paver production equipment, such as conveyor systems, and hydraulic systems. 2. Troubleshoot and diagnose mechanical, electrical, and hydraulic issues to minimize downtime. 3. Conducts preventative maintenance according to schedules to maintain equipment reliability and longevity. 4. Collaborate with production teams to understand equipment performance and address any operation concerns promptly. Discover Award Staffing: At Award Staffing, we believe that work should be more than just a paycheck-it should inspire, empower, and create a sense of purpose. We're passionate about connecting people through meaningful work that truly fits their skills and aspirations. Voted Minnesota's Top Staffing Agency to work for by the Star Tribune, we partner with companies of all sizes to help you find a role where you can thrive. Our team is here to support you every step of the way. Let's find the job that's right for you. Why Award Staffing: • Values Matching: We don't just help you find a job; we connect you with a company that aligns with your values, ensuring it's the right fit for who you are. • Professional & Personal Growth: Your growth matters to us. We focus on finding positions that offer opportunities for skill development and personal fulfillment, so you can thrive in every aspect of your life. • Impact: The work you do should make a difference. We're committed to placing you in roles where you can have a meaningful impact on your life and the community around you. Benefits: May accrue up to 48 hours of paid sick time per year Medical Dental Vision Short-term disability 401k AAP/EEO Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Award Staffing Inc. is a Drug-Free Workplace/EEO Employer. PandoLogic. Category:Installation & Maintenance,

About the Opportunity: • Job Title: Maintenance Technician • Pay Rate Range: $30.00-$35.00/Hour • Location: Jordan, MN • Schedule: 2nd Shift Monday-Friday 3PM-11PM • Position Type: Temp to Hire Requirements and Qualifications: 1. Education/certification or experience with welding. 2. 5 years of experience performing maintenance in a production setting, concrete plants especially. 3. Not afraid to get dirty during their shift. Grease, dirt, and dust. 4. Experience or education in welding is required. 5. Ability to operate, or willingness to learn forklifts. 6. Experience working with concrete production machines. 7. Have any experience in robotics, programming, electronics, or hydraulics is desired but not required. 8. Ability to lift up to 50lbs. Duties and Responsibilities: 1. Perform routine maintenance tasks on automated concrete paver production equipment, such as conveyor systems, and hydraulic systems. 2. Troubleshoot and diagnose mechanical, electrical, and hydraulic issues to minimize downtime. 3. Conducts preventative maintenance according to schedules to maintain equipment reliability and longevity. 4. Collaborate with production teams to understand equipment performance and address any operation concerns promptly. Discover Award Staffing: At Award Staffing, we believe that work should be more than just a paycheck-it should inspire, empower, and create a sense of purpose. We're passionate about connecting people through meaningful work that truly fits their skills and aspirations. Voted Minnesota's Top Staffing Agency to work for by the Star Tribune, we partner with companies of all sizes to help you find a role where you can thrive. Our team is here to support you every step of the way. Let's find the job that's right for you. Why Award Staffing: • Values Matching: We don't just help you find a job; we connect you with a company that aligns with your values, ensuring it's the right fit for who you are. • Professional & Personal Growth: Your growth matters to us. We focus on finding positions that offer opportunities for skill development and personal fulfillment, so you can thrive in every aspect of your life. • Impact: The work you do should make a difference. We're committed to placing you in roles where you can have a meaningful impact on your life and the community around you. Benefits: May accrue up to 48 hours of paid sick time per year Medical Dental Vision Short-term disability 401k AAP/EEO Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Award Staffing Inc. is a Drug-Free Workplace/EEO Employer. PandoLogic. Category:Installation & Maintenance,

About the Opportunity: • Job Title: Maintenance Technician • Pay Rate Range: $30.00-$35.00/Hour • Location: Jordan, MN • Schedule: 2nd Shift Monday-Friday 3PM-11PM • Position Type: Temp to Hire Requirements and Qualifications: 1. Education/certification or experience with welding. 2. 5 years of experience performing maintenance in a production setting, concrete plants especially. 3. Not afraid to get dirty during their shift. Grease, dirt, and dust. 4. Experience or education in welding is required. 5. Ability to operate, or willingness to learn forklifts. 6. Experience working with concrete production machines. 7. Have any experience in robotics, programming, electronics, or hydraulics is desired but not required. 8. Ability to lift up to 50lbs. Duties and Responsibilities: 1. Perform routine maintenance tasks on automated concrete paver production equipment, such as conveyor systems, and hydraulic systems. 2. Troubleshoot and diagnose mechanical, electrical, and hydraulic issues to minimize downtime. 3. Conducts preventative maintenance according to schedules to maintain equipment reliability and longevity. 4. Collaborate with production teams to understand equipment performance and address any operation concerns promptly. Discover Award Staffing: At Award Staffing, we believe that work should be more than just a paycheck-it should inspire, empower, and create a sense of purpose. We're passionate about connecting people through meaningful work that truly fits their skills and aspirations. Voted Minnesota's Top Staffing Agency to work for by the Star Tribune, we partner with companies of all sizes to help you find a role where you can thrive. Our team is here to support you every step of the way. Let's find the job that's right for you. Why Award Staffing: • Values Matching: We don't just help you find a job; we connect you with a company that aligns with your values, ensuring it's the right fit for who you are. • Professional & Personal Growth: Your growth matters to us. We focus on finding positions that offer opportunities for skill development and personal fulfillment, so you can thrive in every aspect of your life. • Impact: The work you do should make a difference. We're committed to placing you in roles where you can have a meaningful impact on your life and the community around you. Benefits: May accrue up to 48 hours of paid sick time per year Medical Dental Vision Short-term disability 401k AAP/EEO Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Award Staffing Inc. is a Drug-Free Workplace/EEO Employer. PandoLogic. Category:Installation & Maintenance,

Date Posted: 2025-12-22 Country: United States of America Location: AL218: 315 Bob Heath Drive,Huntsville 315 Bob Heath Drive , Huntsville, AL, 35806 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Our mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We empower our employees to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. The Electronics Lab Assembly/Solder Technician is primarily responsible for using their skills for assembling, cabling, and validating complex testing rack test systems. This position is 100% onsite in Huntsville, Alabama What you will do Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes. Perform pin crimping, wire routing, and use hand and powered tools. Test and troubleshoot systems using multimeters and other diagnostic tools. Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. Perform physical tasks such as retrieving, storing, and installing equipment. Work from detailed assembly drawings, schematics, or work instructions. Work from verbal instructions and conceptual ideas to a achieve a desired output. Recognizing failures and isolating problems and suggesting appropriate corrective action. Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality. Manage inventory, paperwork, and maintain organizational standards. Qualifications You Must Have High School Diploma or equivalent (GED) and A minimum of 4 years of work experience. Assemble and configure rack-mounted test systems, cables, and harnesses Verification/Inspection experience with associated standards, processes, and documentation. Qualifications Preferred Work experience with mechanical and soldering standards, processes, and documentation. Experience working within an Engineering Technical Support Environment. Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents. CCA manufacturing experience. Knowledge of Fabrication Standards, Processes, and Documentation. IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications Associates Degree in a Technical field. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Location Information Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here? Huntsville Location information: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 40,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Please note, this position is located at Sugarbush Resort in Warren, VT Year Round RESORT OVERVIEW: Sugarbush Resort is a year-round destination offering some of the best skiing and riding in the east, an award-winning ski school, mountain biking, golf, disc golf, an array of dining venues, and a fully appointed Health and Recreation Center. Do you want to join an all-star team dedicated to delivering an unparalleled guest experience? Make this your best season yet by joining the team at Sugarbush and taking advantage of everything Vermont has to offer. BESIDES GETTING PAID TO WORK AT AN INCREDIBLE RESORT, WHAT'S IN IT FOR YOU?: Free skiing + riding privileges at Sugarbush and across the family of Alterra Mountain Company resorts for all eligible employees and their dependents. Free or discounted IKON pass. Discounted golf perks along with health & recreation center membership for eligible employees and their dependents. Vacation and sick time for eligible employees to rest, relax and recharge. Generous discounts on food & beverage, apparel, and outdoor gear. Medical, dental, vision, life, AD&D, short term & long-term disability insurance, EAP, HSAs, FSAs, and more. 401(k) plan with generous company match. Paid parental leave of up to 6 weeks for eligible employees. Employee housing (subject to availability). POSITION SUMMARY: Sugarbush Resort is searching for a Vehicle Maintenance Technician to repair and maintain company vehicles. This is a great opportunity for someone with light or heavy-duty engine experience that enjoys spending time in the mountains. This is a full-time year-round position that pays between $20-$25 per hour depending on experience. RESPONSIBILITIES: Perform daily checks, regular service, and preventative maintenance tasks on company vehicles in order to maximize safety and longevity. Locate breakdowns and communicate with managers to plan and perform mechanical repairs. Look up parts numbers and prices to be ordered for parts requisitions with management. Maintain strong communication with teammates and management. Perform all tasks in an environmentally sound manner, especially in regard to proper disposal of all waste products. Support the Sugarbush Vision and Values. Attend weekly Safety and Service Meetings. QUALIFICATIONS: Must be 18 years old with relevant mechanical experience. Must have a positive attitude and reliable transportation. Prefer you have own tools or willing to buy. Vehicle Technical School education preferred. Must be able to work some weekends and holidays. Must be able to lift 70 pounds. Must be able to work in all weather conditions. Must have strong basic reading and writing skills and the ability to keep records. Must be able to use many types of safety equipment (eye protection, ear protection, hard hat, mask, etc.) Must be able to drive or learn to drive loaders, snowmobiles, trucks, buses, and grooming vehicles. Sugarbush Resort is an Equal Opportunity Employer An offer of employment may be contingent upon the results of a background, MVR, or criminal records check Required Preferred Job Industries Maintenance & Janitorial

Position Title: Maintenance Technician II Reports To: Field Supervisor or General Manager Status : Full-time, Regular position Category : Technician Location Name : Epperson Service Experts Location Address : 1306 Fording Island Rd Suite 106, Bluffton, SC 29910 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities ( depending on the position ) Our Top Technicians earn over $70,000 Generous PTO provided 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays) 29 paid days off after your 2 nd year of employment Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone , tablet , uniform plan , and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Position Summary: Under general supervision, performs precision tune-ups and maintenance on HVAC equipment and accessories. Communicates with customers to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customers. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: Works under general supervision to perform maintenance calls Performs routine precision tune-ups and maintenance on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects and performs limited diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Assists the Service Technician in servicing heating, air conditioning, ventilation, and refrigeration equipment as well as accessories Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. If necessary, collects payment from customers. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked Performs similar/other duties as needed or assigned Health & Safety Roles and Responsibilities: Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications: High school diploma or GED with additional training and 1-3 years' experience in HVAC with technical training certification preferred Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Basic knowledge of the fundamentals of the operational functionality of heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Basic skills in reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on air conditioning equipment Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Experience performing basic maintenance work on HVAC equipment and related accessories is desirable Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 40 pounds and ability to lift and carry items weighing up to 30 pounds

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $40 / hour + Paid OT Location: Bronx, NY Schedule: Monday to Friday, 4AM to 12:30PM Responsibilities: The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Water North America locations. Respond to field service calls. Order mechanical components, services and parts and maintain inventory. Perform and document all phases of vehicle maintenance and repair, including diagnostics. Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. Maintain a unit history file for each vehicle Qualifications: Must be 21 years of age or older. Experience with both diesel /propane vehicles and air brake systems, preferably with heavy duty vehicles. Engine and Chassis Diagnostic software experience. Focus on safe work practices and high quality while executing duties under minimal supervision. Accurately record and document all maintenance activity. Ability to use fleet software for vehicle maintenance tracking, input work orders, and inventory management. Workflow Daily Vehicle Inspection Report (DVIR) and US DOT requirements for commercial vehicles. Ability to lift parts and equipment weighing up to 50 pounds. Must have own set of personal tools. Ability to meet Department of Transportation (DOT) driver qualification policy requirements. CDL preferred; ability to obtain within six (6) months of entering the position (CDL may be required in some locations) Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members .

Position Summary: This posting is for 2nd Shift Only. Provide technical and mechanical support to maintain equipment, minimize downtime, and ensure efficient facility operations. Key Responsibilities: Perform repairs, preventive maintenance, and installation of machines, tools, and equipment. Troubleshoot and resolve mechanical, electrical, hydraulic, pneumatic, PLCs, and robotic system issues. Ensure compliance with safety regulations, PPE requirements, and company policies. Conduct 5S housekeeping, safety audits, and accident investigations. Maintain equipment records and coordinate with other departments for operational efficiency. Support Kaizen and continuous improvement initiatives. Communicate across shifts and with team members to maintain stable production. Work Environment: Automotive manufacturing setting with required PPE. 2nd shift position, including overtime and weekends. Minimal travel required. Qualifications: Education: A high school diploma or GED is required; an associate's degree in maintenance, industrial technology, or a related field is preferred. Experience: Minimum 3 years of maintenance experience (automotive industry preferred). Technical Skills: Expertise in electrical systems, hydraulics, pneumatics, robotics, PLC programming, and conveyor systems. Ability to troubleshoot, analyze, and implement corrective actions for equipment failures. Familiarity with Toyota Production System is a plus. Soft Skills: Strong problem-solving, communication, and teamwork abilities. Ability to work in fast-paced, multicultural environments and adapt to changing demands. Strong time management and organization skills. Computer Skills: Proficiency in Microsoft Office and ERP systems (e.g., Oracle) preferred. Physical Requirements: Ability to stand, walk, climb, stoop, and lift to 50 lbs as needed. Comfortable working in manufacturing environments with noise, dust, and temperature variations.

Position Title: Maintenance Technician II Reports To: Field Supervisor or General Manager Status : Full-time, Regular position Category : Technician Location Name : Epperson Service Experts Location Address : 1306 Fording Island Rd Suite 106, Bluffton, SC 29910 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities ( depending on the position ) Our Top Technicians earn over $70,000 Generous PTO provided 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays) 29 paid days off after your 2 nd year of employment Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone , tablet , uniform plan , and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Position Summary: Under general supervision, performs precision tune-ups and maintenance on HVAC equipment and accessories. Communicates with customers to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customers. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: Works under general supervision to perform maintenance calls Performs routine precision tune-ups and maintenance on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects and performs limited diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Assists the Service Technician in servicing heating, air conditioning, ventilation, and refrigeration equipment as well as accessories Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. If necessary, collects payment from customers. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked Performs similar/other duties as needed or assigned Health & Safety Roles and Responsibilities: Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications: High school diploma or GED with additional training and 1-3 years' experience in HVAC with technical training certification preferred Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Basic knowledge of the fundamentals of the operational functionality of heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Basic skills in reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on air conditioning equipment Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Experience performing basic maintenance work on HVAC equipment and related accessories is desirable Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 40 pounds and ability to lift and carry items weighing up to 30 pounds

$2,500 Sign-On-Bonus based on experience!Impact Fire Services is looking for a Fire Sprinkler Technician to be located in the Venice, Florida area.REQUIRED EXPERIENCE/QUALIFICATIONSMinimum of 2 years' fire sprinkler pipe fitting experience.Commercial Construction Experience preferred.Must know how to read drawings.Can run, layout, measure, thread and cut pipe.Knowledge of Fire Sprinkler Systems installation methods.Adhere to all safety policies and procedures.ADDITIONAL PREFERRED EXPERIENCE / QUALIFICATIONSKnowledge of Fire Sprinkler System DesignUnderstands Fire Sprinkler CodeMust work in an efficient manner with little supervision.Possess and maintain a valid driver's license in accordance with Company guidelines. By applying, you consent to your information being transmitted by Veritone to the Employer, as data controller, through the Employer's data processor SonicJobs. See Impact Fire Services Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at PandoLogic. Category:Installation & Maintenance,

Please note, this position is located at Sugarbush Resort in Warren, VT Year Round RESORT OVERVIEW: Sugarbush Resort is a year-round destination offering some of the best skiing and riding in the east, an award-winning ski school, mountain biking, golf, disc golf, an array of dining venues, and a fully appointed Health and Recreation Center. Do you want to join an all-star team dedicated to delivering an unparalleled guest experience? Make this your best season yet by joining the team at Sugarbush and taking advantage of everything Vermont has to offer. BESIDES GETTING PAID TO WORK AT AN INCREDIBLE RESORT, WHAT'S IN IT FOR YOU?: Free skiing + riding privileges at Sugarbush and across the family of Alterra Mountain Company resorts for all eligible employees and their dependents. Free or discounted IKON pass. Discounted golf perks along with health & recreation center membership for eligible employees and their dependents. Vacation and sick time for eligible employees to rest, relax and recharge. Generous discounts on food & beverage, apparel, and outdoor gear. Medical, dental, vision, life, AD&D, short term & long-term disability insurance, EAP, HSAs, FSAs, and more. 401(k) plan with generous company match. Paid parental leave of up to 6 weeks for eligible employees. Employee housing (subject to availability). POSITION SUMMARY: Sugarbush Resort is searching for a Vehicle Maintenance Technician to repair and maintain company vehicles. This is a great opportunity for someone with light or heavy-duty engine experience that enjoys spending time in the mountains. This is a full-time year-round position that pays between $20-$25 per hour depending on experience. RESPONSIBILITIES: Perform daily checks, regular service, and preventative maintenance tasks on company vehicles in order to maximize safety and longevity. Locate breakdowns and communicate with managers to plan and perform mechanical repairs. Look up parts numbers and prices to be ordered for parts requisitions with management. Maintain strong communication with teammates and management. Perform all tasks in an environmentally sound manner, especially in regard to proper disposal of all waste products. Support the Sugarbush Vision and Values. Attend weekly Safety and Service Meetings. QUALIFICATIONS: Must be 18 years old with relevant mechanical experience. Must have a positive attitude and reliable transportation. Prefer you have own tools or willing to buy. Vehicle Technical School education preferred. Must be able to work some weekends and holidays. Must be able to lift 70 pounds. Must be able to work in all weather conditions. Must have strong basic reading and writing skills and the ability to keep records. Must be able to use many types of safety equipment (eye protection, ear protection, hard hat, mask, etc.) Must be able to drive or learn to drive loaders, snowmobiles, trucks, buses, and grooming vehicles. Sugarbush Resort is an Equal Opportunity Employer An offer of employment may be contingent upon the results of a background, MVR, or criminal records check Required Preferred Job Industries Maintenance & Janitorial

POSITION SUMMARY: The Test Technician will maintain the functionality, productivity, and reliability of testing equipment in our Testing Department. ESSENTIAL FUNCTIONS: Oversees the performance of testing equipment to maintain high standards of quality and efficiency. Conducts preventative maintenance in line with the scheduled PM plan. Ensures proper calibration and functionality of testing equipment to guarantee accurate results. Sets up, adjusts, troubleshoots, and repairs testing equipment according to engineering specifications or manufacturer guidelines. Works collaboratively with teams to identify defect root causes and proposes potential solutions or improvements. Maintains detailed records of test results and prepares comprehensive reports for engineers and other stakeholders. Communicates effectively with vendors and suppliers to address technical concerns or coordinate requirements. Performs additional duties as assigned to support operational needs. GUIDELINES (ABILITIES, KNOWLEDGE, AND SKILLS): Fundamental understanding of electronics and electrical circuits Strong attention to detail, with the ability to carefully analyze results and detect problems or inconsistencies in testing equipment Proficient in problem-solving by identifying root causes of issues and developing effective solutions Skilled in interpreting test results, recognizing patterns, and deriving meaningful insights from data Adept at documenting findings clearly and communicating results and recommendations effectively to team members or stakeholders Capable of efficiently managing multiple testing tasks while adhering to deadlines Excellent communication skills for effective collaboration and information sharing Proficient in Microsoft Windows OS, Linux, and Microsoft Office Suite EDUCATION/EXPERIENCE: Associate degree in Electronics or 1-3 years of equivalent experience in electronics, manufacturing, or a related field is required.

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. $3,000 Sign On Bonus! Reporting Location: Elgin, IL Pay: $39.60/ hour Sign on Bonus: $3,000 (payable after 90 days of successful employment) PM Shift: Monday - Friday (Saturdays dependent on business needs) Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities: The Sr Fleet Technician's primary purpose will require the individual to perform preventative and corrective maintenance on fleet vehicles and equipment including gas and diesel engines, hydraulic systems, air brakes, forklifts, tankers and trailers. Key responsibilities Troubleshoot and repair fleet vehicles and equipment Oversee Fleet Technicians and provide direction as assigned by Lead Technician Help schedule and support all work within the shop Coordinate training Manage costs according to budget and daily completion of repairs Ensure DOT compliance Program and record assigned preventative maintenance tasks Receive and process invoices for payment Maintain parts inventory and budget Parts and Inventory control Maintain shop housekeeping standards and prepare end of month reporting and/or any other administrative requirements Ensure safe work practices Qualifications: Key Qualifications Positive team-player attitude High School Diploma, GED or equivalent work experience Completed 2 years of technical education or possess 3 years of hands on experience Must have diagnostic experience and the ability to both read and understand technical manuals and schematics Perform additional facilities repairs Ability to handle physical requirements including but not limited to repeated bending, stretching, twisting and lifting up to 60 pounds Microsoft Office (Excel, Outlook) experience preferred Must be experienced in diesel engine repair, hydraulic systems, drive train assemblies, suspension chassis, electrical troubleshooting and repair Valid Driver's License Ability to obtain CDL Class B within specified period of time ASE certification required within specified period of time Must possess personal tools Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Brands and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members .

Description: About our company: Bakerly, a happy family-owned company, is proud to be home to one of the fastest-growing brands in the US food industry! We are a baked goods manufacturer that emphasizes delicious, premium, and authentic recipes using only the very best ingredients. Our offices located in Miami, FL, Easton, PA, and San Antonio, TX, will make you feel right at home. Please visit our website to learn more about our delicious French crêpes, golden chocolate croissants, fluffy pancakes, and our large range of outstanding French brioches. Scope/Purpose of the Position The purpose of this position is to lead the Maintenance Department, ensuring the safe, reliable, and efficient operation of all production and facility equipment across the site. The Maintenance Manager provides strategic and technical leadership for all maintenance activities, oversees departmental budgets and staffing, and drives preventive and predictive maintenance programs. This role ensures long-term asset reliability, supports continuous improvement initiatives, and partners with Production, Quality, and Engineering to sustain high operational performance. Key Responsibilities and Essential Functions Strategic & Departmental Leadership: Direct and oversee all maintenance operations, ensuring alignment with corporate engineering and reliability standards. Develop and manage departmental budgets, staffing plans, and capital improvement initiatives. Define and communicate department objectives, key performance indicators (KPIs), and expectations. Provide leadership and mentorship to supervisors, leads, and technicians to ensure engagement and performance. Establish and maintain skill development and succession planning strategies for all maintenance personnel. Represent the Maintenance Department in leadership meetings, audits, and cross-functional reviews. Operational Oversight: Ensure all maintenance activities are performed safely, efficiently, and in compliance with OSHA and Bakerly policies. Oversee preventive and predictive maintenance programs to minimize downtime and maximize equipment availability. Manage vendor and contractor relationships, ensuring quality and cost control in all external maintenance work. Maintain proper spare parts inventory levels and accuracy through CMMS management. Ensure timely and accurate documentation of maintenance activities, work orders, and inspections. Support Engineering with equipment design modifications and capital projects. Continuous Improvement & Collaboration: Lead root cause analysis (RCA) for equipment failures and implement corrective actions. Drive initiatives to improve reliability, performance, and efficiency of plant systems. Partner with Production, Quality, and Sanitation teams to maintain uptime and product integrity. Promote sustainability and resource efficiency by reducing utilities consumption. Foster open communication and collaboration across departments to ensure seamless operations. Compliance: Ensure adherence to GMPs, food safety standards (SQF, FSMA), and company maintenance policies. Promote a proactive safety culture through regular training, audits, and incident prevention. Support compliance with all local, state, and federal regulations related to safety, environmental, and facility systems. Supervisory Responsibilities Leads the Maintenance Department, including supervisors, leads, and technicians. Accountable for hiring, training, performance evaluation, and disciplinary action within the department. Responsible for developing leadership capability and maintaining a culture of accountability and continuous improvement. Requirements: Education: High school diploma or equivalent required; technical degree or certification in Electrical, Mechanical, or Industrial Maintenance preferred. Experience: Minimum of 4 years of industrial/mechanical maintenance experience in a packaging or manufacturing environment. Minimum of 2 years in a management or leadership position within a food manufacturing setting. Experience with CMMS systems and maintenance planning. Strong understanding of mechanical, electrical, pneumatic, and refrigeration systems. Skills: Strong leadership, communication, and decision-making skills. Ability to build and lead a multi-disciplinary technical team. Proficiency in Microsoft Office (Word, Excel, PowerPoint); AutoCAD knowledge a plus. Excellent problem-solving, organization, and time management abilities. Commitment to safe work practices and high operational standards. Preferred Qualifications Associate or bachelor's degree in Engineering, Maintenance Management, or a related technical discipline. Formal training or certification in reliability engineering or maintenance planning. Experience implementing predictive maintenance or continuous improvement methodologies (e.g., TPM, Lean). Physical Requirements Ability to stoop, kneel, crouch, crawl, or climb (including stairs/ladders). Ability to stand, walk, and reach with hands and arms. Ability to lift and move up to 50 pounds. Dexterity to handle tools, parts, and materials. Vision abilities including close, distance, peripheral, depth perception, and focus adjustment. Work Environment Work primarily on the production floor with exposure to varying temperatures, humidity, and noise levels. Frequent standing, walking, and bending required. Possible proximity to food ingredients, including allergens (wheat, dairy). PPE required at all times (hairnet, beard net if applicable, gloves, safety shoes). Strict adherence to sanitation and safety standards. Location: Easton, PA Job Type: Full Time FLSA: Salary-Exempt Benefits and Perks Competitive salary and performance-based bonus incentives Comprehensive health, dental, and vision insurance packages Employer-paid life insurance and long-term disability Flexible spending accounts (FSA) Additional supplemental insurance options (life, critical, accident, STD) Free stress-management counseling and discounts on health and fitness products Generous PTO policy and 401(k) plan with 3% employer match 9 paid company holidays 40% discount on all company products Our Commitment We are committed to creating a diverse and inclusive workplace, free from discrimination. Our recruitment process is based solely on qualifications and skills, without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We comply with all applicable laws and regulations regarding non-discrimination in employment. PIa6da4-5575