97 jobs found

TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

We are looking for an experienced Stores and Receiving Specialist to work in our aerospace manufacturing plant! This is a fantastic opportunity because it is a hybrid position and will have both stores responsibilities and will be cross trained in receiving. We are Tacoma's BEST KEPT SECRET, with one of the best benefits packages in town, and we are HIRING NOW! WHO WE ARE AND WHAT WE DO WE MAKE RIGID & FLEXIBLE POLYURETHANE FOAM AND BUILD-TO-PRINT COMPOSITE PARTS General Plastics has been meeting the stringent requirements of engineers and design teams in diverse industries for over 80 years. Commercial, military and composite manufacturing companies use LAST-A-FOAM rigid and flexible foam sheet stock for its proven mechanical properties and extraordinary versatility. They also depend on us to provide high-quality, high-performance composite assemblies and finished custom parts. We work with our customers through the design process, feasibility, fabrication, and delivery of custom parts. From high-temperature tooling boards, core material or custom fabricated assemblies, expect quality, uniformity, and stability of materials with General Plastics. From the oceans' depths to deep space, we shape great ideas into reality! JOB DESCRIPTION SUMMARY Stores and Receiving Specialist (Aerospace Manufacturing) This position is responsible for the complete lifecycle of incoming materials, including receipt, inspection, internal movement, accurate inventory maintenance, and issuance to the manufacturing floor. This is a critical role in ensuring material integrity and production continuity. Core Responsibilities Stores and Inventory Control: Material Issuance: Responsible for accurately issuing materials and kits used by the operations team for the fabrication and assembly of aerospace parts, processing all associated transactions in the ERP system. Inventory Accuracy: Maintain accurate physical and systematic inventory record in the company stores area through precise material handling, location management, and routine cycle counting. Internal Logistics: Manage the efficient movement of materials throughout the manufacturing plant, utilizing appropriate equipment (hand truck, pallet jack, forklift) including transport to the secure upper mezzanine stores area. Departmental Collaboration: Work closely with the Production Planning, Quality Assurance, and Shipping departments to manage material flow. Receiving and Inspection: Inbound Logistics: Receive, unload, and process all incoming shipments (raw materials, components, supplies) from vendors and carriers. Documentation Verification: Perform an initial verification of all inbound materials against the corresponding packing lists and Purchase Orders (POs) to confirm quantity, part number, and description. System Processing: Accurately transact material receipts in the ERP/WMS system, affixing identification tags, and staging materials in the appropriate quarantine area for Quality Inspection. Quality Inspection: Conduct preliminary visual and dimensional inspection of received parts to ensure conformance to basic requirements. Verify required documentation, such as Certificates of Conformance (CoC) and Material Test Reports (MTRs), against the Purchase Order specifications. Utilize basic precision measuring instruments (e.g., calipers, micrometers, tape measures) to check critical dimensions. Non-Conformance Management: Document and isolate non-conforming or damaged materials, initiating the Non-Conformance Report (NCR) process and ensuring rejected stock is securely quarantined. Area Organization: Maintain a clean, safe, and highly organized receiving dock and inspection area, adhering to 5S principles. Requirements Must have previous experience in manufacturing or warehousing logistics (preferably in aerospace or plastics manufacturing). Must be able to receive and interpret written work instructions and verbal directions from supervisors and peers. Must demonstrate good judgment to perform the job correctly and safely, particularly when operating materials handling equipment. Ability to read, interpret, and process technical documentation (POs, packing lists, CoCs). Must have a high school diploma or GED. Basic proficiency in utilizing an ERP or Inventory Management System (WMS) is highly desirable. Physical Requirements Standing 8 hours per day. Ability to climb one flight of stairs multiple times per day (Stores area is on second floor of mezzanine). Ability to operate materials handling equipment, including a forklift (certification preferred/required). Finger dexterity - the ability to make precisely coordinated movements of the fingers to grasp, manipulate, or assemble small objects for inspection and counting. Ability to work with or around chemical solvents (e.g., when handling incoming chemical raw materials). SHIFT This position requires that you are available for either day or swing shift. We offer a $1.50 shift premium for anyone on swing shift. Overtime is optional and never mandatory! WHAT WE HAVE TO OFFER Your innovation and hard work can help create some of the most unique high performance plastic products for emerging markets, and long-term customers in the country. As a result, you'll find one of the best compensation, benefits and advancement programs in the industry. We're looking for energetic, motivated people with a "can-do" attitude and a desire to work "smart." If you are a person with a strong work ethic who enjoys the chance to excel in a positive, team-oriented setting, you'll find General Plastics to be a rewarding environment. PAY STARTS BETWEEN $21 - $24/hr PLUS BONUS - DEPENDING ON EXPERIENCE Our Total Compensation Package is Beyond the Industry Average and includes the following: Profit-Sharing Bonus Program paid 3 times per year Outstanding Platinum Health Care Benefits including zero premium for medical and vision for entire family & zero premiums for dental for employee Company Matched 401K up to 8% Employee Assistance Plan We encourage healthy eating and subsidize lunchroom food/beverage costs Disability & Life Insurance Package Flexible Spending and Dependent Care Accounts available Generous Earned Time Off Plan starts at 15 days of leave per year, plus 9 Paid Holidays ITAR - US Persons Status Due to General Plastics' participation in the defense industry, International Traffic in Arms (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. A "US Person" can be a US citizen, a lawful permanent legal resident, or an individual who has been admitted as a refugee or asylee. General Plastics Manufacturing Company EEO Statement General Plastics is committed to a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, age, religion, gender, sexual orientation, gender identity, disability, veteran status, or any other legally protected status. Should you have a disability that requires assistance and/or reasonable accommodation with the job application process, please contact the Human Resources department at . Drug and Alcohol-Free Workplace General Plastics is a Drug and Alcohol-Free Workplace, and both post offer applicants and employees are subject to testing for marijuana, cocaine, PCP, opioids, amphetamines, and alcohol when criteria are met as outlined in our company policies. We are a federal subcontractor, and we test for marijuana Requirements Must have previous experience in manufacturing or warehousing logistics (preferably in aerospace or plastics manufacturing). Must be able to receive and interpret written work instructions and verbal directions from supervisors and peers. Must demonstrate good judgment to perform the job correctly and safely, particularly when operating materials handling equipment. Ability to read, interpret, and process technical documentation (POs, packing lists, CoCs). Must have a high school diploma or GED. Basic proficiency in utilizing an ERP or Inventory Management System (WMS) is highly desirable. Physical Requirements Standing 8 hours per day. Ability to climb one flight of stairs multiple times per day (Stores area is on second floor of mezzanine). Ability to operate materials handling equipment, including a forklift (certification preferred/required). Finger dexterity - the ability to make precisely coordinated movements of the fingers to grasp, manipulate, or assemble small objects for inspection and counting. Ability to work with or around chemical solvents (e.g., when handling incoming chemical raw materials). SHIFT This position requires that you are available for either day or swing shift. We offer a $1.50 shift premium for anyone on swing shift. Overtime is optional and never mandatory! WHAT WE HAVE TO OFFER . click apply for full job details

COMPANY BACKGROUND: LEER GROUP is North America's largest manufacturer and supplier of fiberglass and aluminum truck caps and tonneaus for residential and commercial applications. The group is comprised of multiple brands including: LEER , Snugtop, Bedslide, Pace Edwards , Century, Raider, and StateWide Windows . Together, these companies have manufacturing plants in Pennsylvania, Indiana, Washington, and Oregon, and sell through more than 1,300 independent dealers to individuals, small businesses, exporters, new car and truck dealerships, and fleet operators. Founded in the late 1960s, LEER is the most widely recognized brand name in the truck cap industry and the number-one selling brand of pickup truck caps and tonneau covers in the country. LEER truck caps are custom-manufactured in Indiana, and Pennsylvania and delivered to more than 800 independent LEER retailers. The industry leader in innovation, quality and customer service, LEER offers the industry's most complete selection of truck caps for consumer and commercial use, fiberglass tonneaus, retractable tonneau covers, and a soft roll-up cover. With its wide range of products, dozens of standard and optional features, and its partnerships with racking and storage solutions companies such as Thule, LEER offers products that appeal to a large and diverse customer base. Customized ordering ensures LEER can create a truck cap or tonneau for urban or rural use that appeals to families, hunters and fishermen, cyclists and boating enthusiasts or anyone who needs a stylish, well-built cargo solution. For its commercial and fleet customers, LEER offers truck caps customized with dozens of trade-related options and storage systems. A subsidiary of J.B. Poindexter, a privately held diversified manufacturing company, LEER Group offers a vast variety of career opportunities, internally as well as within the J.B. Poindexter family of companies. We offer competitive salaries and progressive benefits including health, dental, vision, life insurance, disability plans, 401K, paid time off, tuition reimbursement and more. We pride ourselves in team member development, performance, recognition, and a culture of diversity and respect. Whether you are taking the next step of your career or just beginning, joining LEER Group's winning team means being part of a great home away from home. You will be challenged. You will be proud. Are you looking for an opportunity to develop your skills in General Production Labor? If you are dedicated, a fast learner and have great attendance, this is the job for you! State Wide Windows, is looking to fill full time 1st shift positions for our Manufacturing Production Labor in Elkhart, IN. These Positions are scheduled: Monday-Thursday 5:00 am - 3:30 pm w/ mandatory overtime including Fridays & Saturdays if necessary. GENERAL SUMMARY: A Manufacturing Production Labor Worker will perform various basic and skilled Manufacturing Production Labor tasks and processes to achieve a finished product. The tasks will vary depending on the position in the line. COMPETENCIES (KNOWLEDGE, SKILLS AND ABILITIES): These positions are very active and requires standing, walking, bending, kneeling, stooping, and crouching Must be able to be to work on time and ready to work Must be able to demonstrate accuracy and thoroughness Must be able to work with minimal supervision Must use the assigned Personal Protective Equipment (PPE) such as: Safety Glasses, ear plugs, and cut resistant safety gloves If you are interested in making a positive change, please stop by to complete an application or send the information to anyone who may be interested. You can apply at: 3518 CR 6 East Elkhart, IN 46514 ext. 16901 Why work for Leer Group (TAG) Leer Group offers top competitive rate of pay with increases at 30 and 90 days depending on attendance and ability. Year around employment - No Shut down in July! We have 10 paid holidays. - No Waiting Period After 1 year, Team Members are eligible for 1 week of paid vacation. TAG does not have shutdowns like other industries, we work year around, so you take your vacation when you want. After 2 years, you will be eligible for 2 weeks of paid vacation. After 7 years, this increases to 3 weeks. At 15 years, you will be eligible for 4 weeks! After 90 days Full Time Team members are eligible for 16 hours of unpaid sick time to use for medical reasons. Leer Group pays all their Full-Time team members to have Life Insurance, AD&D coverage, Long Term and Short-Term Disability. In addition to the Life and Disability benefits, Leer Group offers very competitive Health, Dental and Vision plans to all employees. Leer Group also has a great 401(k) plan that includes a 3% match of the 1st 5% you contribute. If 5% of your income is $30, Tag contributes another $18 to your plan! It's a great way to save for the future. (.60 per $1.00 Contributed) Leer Group rewards it employees with t-shirts, sweatshirts, luncheons . When we meet our goals. Stable - LONG TERM business in Indiana, Pennsylvania, Washington, Oregon, and California. Cross training, become a more rounded employee PandoLogic. Category:Manufacturing,

COMPANY OVERVIEW: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing over 23,000 people and net sales of over $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. DIVISION OVERVIEW: Crown's Food Division is a premier manufacturer of food cans. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Division. JOB LOCATION: Crown Cork & Seal USA, Inc. th Street SE Massillon, Ohio POSITION OVERVIEW: The Production Engineer will assist engineers and manufacturing staff with business-critical projects that support daily operations, safety, quality and productivity improvements of our products and processes. This position will cover existing operations and help with our expansion projects. DUTIES AND RESPONSIBILITIES: Consults with design engineers on features needed for new or existing installation. Prepares purchase requisitions or work orders to obtain needed tools or parts for the installation. Coordinates staff and assist in set-up die and equipment assembly and debugging for installations to ensure on-time completion. Investigates and resolves engineering related manufacturing problems. Compares dimensions of parts to blueprints, and resolve differences by revising or redesigning, utilizing 2D & 3D CAD tools (AutoCAD & SolidWorks) and Inventor Programs. Assists with satellite plant installations, as needed, including set-up, assembly, problem solving and follow-up to project completion. Analysis of data, evaluation of results and creation of technical reports, recommending further actions to be taken Working on cross disciplinary teams to solve manufacturing problems in the field Reporting project progress to Senior Management Working with Tool and Die shop to develop tooling packages for production equipment Other duties as assigned by management. MINIMUM QUALIFICATIONS: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or similar engineering area 3-5 years manufacturing engineering experience Experience with mechanical design, gear design, cam design, and/or food packaging machinery design Proficient with AutoCAD and Autodesk Inventor design software Proficient with Microsoft Office, especially Excel, Word, and PowerPoint Background in Lean/6-Sigma preferred Prior leadership experience preferred Understanding of the use of statistics in manufacturing Strong written, verbal, analytical and interpersonal skills required High level of independent thinking and resourcefulness to develop and propose solutions to problems Ability to interface with various levels of staff from peers to management, to production employees PHYSICAL REQUIREMENTS: While performing the duties of this job, the team member is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls, and reach with hands and arms. The team member is frequently required to climb or balance and talk or hear. The team member is occasionally required to stoop, kneel, crouch, or crawl. The team member must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus . WORKING CONDITIONS: Generally, this position's work duties are split between a typical office setting and the plant production floor. While performing the duties of this job in the plant, the team member may be exposed to moving mechanical parts and vehicular traffic This position may be exposed to a wide range of temperatures in the plant The noise level in the plant is frequently loud The Massillon plant and grounds are tobacco-free. This means that the use of tobacco of any kind will not be permitted anywhere in the building or on Crown property. This also includes prohibiting the use of any electronic cigarette devices. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EEO/AA/Vets/Disabled

Calgon Carbon A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: General Laborer Location: Equipment and Assembly Facility - Pittsburgh, PA Excellent Benefits : Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks : Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of Work: Monday-Friday (must be able to work a two shift rotation; day and afternoon) Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Duties and Responsibilities (not limited to) Perform all general labor functions (Sweep floors, empty trash, cut grass/remove snow when needed) Load/unload trucks Operate fork truck Operate jib hoist Operate small power tools Operate and maintain all personal safety equipment Assemble all standard products, such as disposorbs, vaporpacs, high flow ventsorbs, etc. Pressure test all assembled units to meet necessary requirements Recondition small returnable units, such as cyclesorbs, bulk bins, etc. Weigh/Load carbon into the small systems as needed. Assist in receiving and verification of quantities of materials and parts delivered to E&A. Read instructions & drawings as necessary for the reconditioning and assembly of standard products. Fabricates lined pipe (PPL and TFE). This includes cutting, threading, assembly, flaring and testing of pipe spools from 1" through 4". Cuts, threads, and assembles carbon steel pipe, plastic pipe and stainless steel pipe Assists with warehousing duties. Performs layout and assembly on all small equipment such as cyclesorbs, bulk bins, vapor paks and high flow ventsorbs (and fan skids). Maintain CCC's service equipment. This includes dual modules, mobile adsorbers, filters, etc. Duties include review of system when returned from customers, preparation of list(s) of required repairs and parts, performance of repairs to the mechanical parts of the systems as well as localized (spot) lining/painting repairs Pickup parts and or make small equipment deliveries Qualifications A High school diploma or general education degree (GED) is preferred 0-2 years of general labor experience Industrial labor experience is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PIe1924b745e76-1049

Manufacturing Engineer 3 Department: Manufacturing Division: Manufacturing Engineering At Daniel Defense Only the Best Build the Best Daniel Defense engineers and manufactures the world's finest weapon systems and accessories. Our mission to honor God and defend freedom is accomplished by serving customers and providing top quality solutions to our military, law enforcement and civilians that are seeking premium firearms for home defense, hunting, and sport shooting. As a Manufacturing Engineer 3 you will be responsible for the functions outlined below Essential Functions: Responsible for demonstrating commitment to and leadership of environmental health and safety principles, policies and procedures. Plans and designs manufacturing processes for a production facility. Analyzes assembly, fabrication, machining and other processes to maximize efficiency by optimization of layout of equipment, workflow, and assembly methods. Determines the parts, equipment, tools and processes need in order to achieve manufacturing goals according to product specifications. May conduct time and cost analysis of processes. Research, design, develop, test, and improve manufacturing processes by studying product and manufacturing methods and equipment. Apply knowledge of product design, fabrication, assembly, tooling and materials; confer with equipment vendors where necessary. Conduct audits of assembly and machining processes and/or work instructions; solicit observations from operators. Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. Assure product and process quality by designing testing methods; testing finished product and process capabilities; establishing standards; and confirming manufacturing processes. Provide manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; and estimating future requirements. Keep equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; and requesting special service where necessary. Maintain product and process files in company database. Maintain professional and technical knowledge by attending education workshops, reviewing professional publications, and participating in established personal networks and professional societies. Complete design and development projects by training and guiding machinists, programmers, and operators. Participates in the company's efforts to continuously improve in Safety, 6S, Quality, Delivery and Productivity. Expected to be a contributor to the company standards on high integrity, safety, fair and equitable treatment and a positive work environment Other responsibilities as deemed appropriate or necessary by the VP and/or management. Knowledge, Skills and Abilities: Bachelor's Degree with 4-7 years of prior manufacturing experience in metal working environment or a combination of related experience, education and/or training to sufficiently and successfully perform the essential functions of the job. Contributes to moderately complex aspects of a project. Work is generally independent and collaborative in nature. Has knowledge of commonly used concepts, practices, and procedures within the field. Has experience of GD&T, Solidworks, CNC Programming, Mastercam, or similar software. Dealing with complex issues to ensure that leadership and supervision, as well as shop employees, are kept abreast of problems, changes, issues, etc. Must be able to manage time efficiently and put in the extra effort and hours as needed. Demonstrated ability to manage multiple projects simultaneously, set priorities, identify and address problems, meet deadlines, stay within budget and ability to work under pressure. Demonstrated ability to recognize and work in accordance with our Company Values. Physical Requirements: Must be able to lift and carry awkward items weighing up to 50 pounds. Requires intermittent standing, walking, sitting and bending throughout the work day. Must be able to work in a manufacturing environment, to include working in and around machinery, exposure to noise and chemicals, lights/lasers, etc. Must be able to wear appropriate Personal Protection Equipment as required by your position and/or Company policy. Daniel Defense is an EOE AA M/F/Vet/Disability employer and promotes a "Drug-Free Workplace." Note: The statements above are intended to describe the general nature and level of work being performed by those assigned to the job. This list is not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel in this job. Responsibilities are subject to change at the discretion of the employer and do not establish a contract of employment - Daniel Defense is an at-will employer. PI23b02d13b0d7-9716

Engineering Student Intern / Co Op Department: Engineering Division: All Engineering Teams At Daniel Defense, Only the Best Build the Best Daniel Defense engineers and manufactures the world's finest weapon systems and accessories. Our mission to Honor God and Defend Freedom is accomplished by serving customers and providing top quality solutions to our military, law enforcement and civilians that are seeking premium firearms for home defense, hunting, and sport shooting. As an Engineering Student Intern / Co Op , you will gain hands-on experience in Research & Development, New Product Development, Automation, Electrical, Design and/or Manufacturing engineering functions. You will be expected to contribute to projects that enhance product performance, support manufacturing efficiency, and ensure quality standards while developing your engineering skills in a real-world environment. Essential Functions: Responsible for demonstrating commitment to and leadership of environmental health and safety principles, policies and procedures. Engineering Disciplines that you may work with: Design, Manufacturing, New Product Development, etc. Aid in the New Product Stage/Gate Process to help ideas and technologies venture into new product. Assist in the design, prototyping, and testing of firearms and related accessories. Develop technical data packages including CAD models, 2D drawings, and specifications for manufacturing and assembly. Maintain and construct work instructions and standard operating procedures (SOPs). Contribute to cost estimates, risk assessments, and design reviews for new products. Create and execute test procedures for new technologies and existing product lines. Provide technical support to sales and marketing on new products. Work with manufacturing to design cost-effective and efficient solutions. Participate in fixture and gage design for handling, assembly, and inspection of parts. Develop, implement, and validate new gaging systems and fixtures in alignment with equipment performance requirements. Collaborate with team members and company personnel to create and implement operating procedures, and assist in resolving system malfunctions. Participates in the company's efforts to continuously improve in Safety, 6S, Quality, Delivery and Productivity. Expected to be a contributor to the company standards on high integrity, safety, fair and equitable treatment and a positive work environment Knowledge, Skills, and Abilities: Mechanical, Manufacturing or related Engineering major in-progress, minimum GPA of 2.75 1 year of related experience and/or training; or equivalent combination of education and experience. Experience in SolidWorks (3D modeling required; exposure to Mastercam or similar software is a plus.) Basic understanding of Geometric Dimensioning and Tolerancing (GD&T). Exposure to Finite Element Analysis and interpreting results preferred. Knowledge of manufacturing processes, fixtures and gaging systems desirable. Experience with firearms design and implementation a plus. Strong teamwork and communication skills; ability to interact with Executive Leadership, team members, vendors and customers. Self-motivated, independent worker with the ability to manage tasks under deadlines Firearm experience a plus but not required. Physical Requirements: Must be able to lift and carry awkward items weighing up to 25-50 pounds. Requires intermittent standing, walking, sitting and bending throughout the workday. Must be able to work in a manufacturing environment, to include working in and around machinery, exposure to noise and chemicals, lights/lasers, etc. Must be able to wear appropriate Personal Protection Equipment as required by your position and/or Company policy. Daniel Defense is an EOE AA M/F/Vet/Disability employer and promotes a "Drug-Free Workplace." Note: The statements above are intended to describe the general nature and level of work being performed by those assigned to the job. This list is not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel in this job. Responsibilities are subject to change at the discretion of the employer and do not establish a contract of employment - Daniel Defense is an at-will employer. PIf87b5-

NPD Engineering Manager The New Product Development (NPD) Engineering Manager is responsible for leading the end-to-end development of innovative products from concept through production, ensuring they meet performance, quality, cost, and schedule goals. This role oversees and mentors a multidisciplinary engineering team, fostering a high-performance culture and actively developing technical talent to support both product needs. The NPD Engineering Manager plays a critical role in driving technical excellence, project execution, and cross-functional collaboration with product management, manufacturing, quality, and supply chain teams. As an NPD Engineering Manager you will: Be responsible for management of multi-facility global design teams in a Stage-Gate process. Coordinate the activities of mechanical, electrical, and manufacturing engineers to complete designs, build test units, and create documentation. Responsible for managing resources within the departmental team to be in line with workload and schedule commitments on projects, delegating/allocating tasks and responsibilities to team members Develop schedules, coordinate and manage projects of all complexity levels with little to no supervision. Responsible for preparation and monitoring of project budgets in area of responsibility. Responsible for departmental project designs meet requirements of specification and standards while promoting error-proof assembly. Responsible for coordination with specification writers to ensure project feasibility. Ensure design personnel utilize Lean design and manufacturing processes and follow good design control practices. Deliver innovate designs that meet profit, cost, quality, and time-to-market metrics. Oversee construction and testing of prototype components or assemblies as required in the development and approval process. Ensure designs follow established procedures for creation and maintenance of CAD databases and libraries. Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings. Responsible for proactively identifying and mitigating risks to the project. Be responsible for development test plan creation based on D/PFMEA and in line with project specifications, industry standards, and G&W reliability and validation requirements. Responsible for ensuring testing is in line with the test plan and meets or exceeds G&W requirements. Perform root cause analysis and troubleshooting on the new and existing products and processes Work with third party vendors and/or partners to develop high quality, lowest cost design options. Interface with purchasing and vendors in the selection and approval of component parts and assemblies. Prepare written documentation of processes, material requirements, test results and project activity as required. Create / revise G&W standards as needed. Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times. Participate in industry organizations (associations, standards committees, etc) to stay informed of and to influence industry activities. Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes. Help to train departmental teams on the application and customer use of G&W products. Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involved Develop direct reports' work skills to improve department quality, throughput and to reduce scrap/rework. Work with individuals regarding company competencies and personal growth plans. Responsible for rating performance of subordinates against job requirements, established goals, and company competencies. Coaches, mentors and influences others within departmental structure while reinforcing the corporate mission, vision, and values. Educate and mentor to develop technical skill sets. Encourage innovative thought processes and "out of the box" thinking for design and manufacturing processes. May perform other duties as assigned. As a Leader, be responsible for hire/fire decisions; performance appraisals; employee training and development; handles disciplinary problems. This job will be evaluated on these decisions. We are looking for someone who: Holds a Bachelor's degree in Electrical Engineering Has 8+ years progressive experience in Engineering design and/or development which includes: Leading highly technical and innovative projects. Desire to be constantly challenged with new problems Project management, team management, root-cause analysis and computer analysis programs Medium/high voltage electrical power systems Leading and reviewing DFMEA, PFMEA, and PPAP process and documents Leading development projects within a Stage Gate Process Possesses strong technical knowledge in the following categories per discipline: Mechanical: Molded Components and polycarbonate housings or Mechanism Design, castings, and metal fabricated parts. Electrical: Current and Voltage Sensors, Power Systems (Protection, System Analysis, and System Fault Response) Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers. Has excellent communication and mentoring skills. Has proven experience with computers; Microsoft Office, Microsoft Project or equivalents. Preferably has been a published author and/or involvement in industry publications. Ideally has a history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies. What we offer you: Typical pay is $111,828 - $160,000 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Aerodyne Industries is a dynamic, rapidly growing engineering and information technology services firm headquartered on Florida's exciting Space Coast. With locations throughout the US, we take pride in delivering small business agility with large corporation capabilities. Our list of clients count on us to prepare NASA's Missions to the Moon and Mars and to defend our nation supporting the Missile Defense Agency and Department of Defense. Join the adventure of a lifetime by becoming a teammate with Aerodyne Industries and work on projects that will define our future. Responsibilities: Support flight and development projects as the focal engineer for Electrical, Electronic and Electromechanical parts specification, selection, part utilization, and obsolescence management through the use of NASA and industry standard databases for all part types listed in MSFC-STD-3012. Participation in the NASA EEE Parts Community of Practice. Failure analysis of avionics systems, assemblies, and components by applying both non-destructive and destructive testing methods to identify root causes of failures. Candidate will be required to perform the following: Perform continuous parts obsolescence monitoring and notification of project impacts of EEE parts using Silicon Expert, Total Parts Plus, and EPARTS (Electronics Parts Application, Reporting, and Tracking System) databases. Electrical, electronic and electromechanical part selection for NASA programs. Maintenance of electrical, electronic and electromechanical part requirements and specifications. Support maintenance the obsolescence module of the Electronics Parts Application, Reporting, and Tracking System. Perform obsolescence analysis of electrical, electronic and electromechanical parts used throughout the Agency. Support development of electrical, electronic and electromechanical part plans, lists, reviews, testing, and analyses. Participate in space flight, and development projects, failure analysis of avionics systems, assemblies, and components. Conduct failure analysis of electrical and electronics systems in a laboratory environment and development of corresponding failure analysis methodology. Determine root cause of failures and/or failure modes. Assist or lead investigations into nonconforming products. Participate in Electronics Parts Application, Reporting, and Tracking System meetings. Participate in electrical, electronic and electromechanical parts Community of Practice meetings. Degree in Engineering or related field is required. Degree from an ABET accredited university is preferred. Typically, educational requirements are the equivalent of a Ph.D., with a minimum 9 years of experience, Masters with at least 13 years of experience, or BS with at least 15 years of experience. The following skills are required or desired, as indicated: Experience in part specification and selection for all part types listed in MSFC-STD-3012 is desired. Experience is required in EEE parts engineering, including parts obsolescence management, part utilization, database maintenance and usage is required. Knowledge and experience in using obsolescence analysis tools (software) to provide proactive obsolescence management is required. Knowledge of materials science is required. Knowledge of electronic components is required. Knowledge and experience in failure analysis of avionics with an understanding of the underlying mechanical/electrical causes for component and/or assembly failures is desired. Oral and technical writing skills are required. Essential Functions Work Environment Office environment. Requires ability to provide clear, concise, accurate and timely communication, both verbally and in writing (100%). Requires ability to interact professionally with co-workers, management, and client (100%). Requires travel in the domestic USA ( Physical Requirements Requires sitting for extended periods of time in meetings with peers, management, and with our client at NASA facilities to discuss technical issues (10%). Also, requires sitting for extended periods of time at a desk to write reports and perform engineering tasks (40%). Requires ability to use stairs or elevators for access between floors and multiple buildings at NASA and our facilities (10%). Equipment and Machines Requires ability to operate a personal computer, a telephone, fax machine, copier, calculator, and other general office equipment (100%). Attendance Normal workday is from 7:30 a.m. through 4:30 p.m., Monday thru Friday. Minimal overtime may be required (10%) to meet schedule milestones and to support technical demands of the job. Regular attendance is a necessity and adequate arrangements for delegating duties during absences are required. Other Essential Functions The ability to work independently with minimal supervision, to make rational decisions, and to exercise good judgment is essential (100%). Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. Proof of U.S. Citizenship is required. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PIf2c6e77f5d32-1318

Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? Join Our Team as an Outside Plant Construction Technician II in Plymouth, WI! Ready to roll up your sleeves and bring cutting-edge fiber technology to life? As our Outside Plant Construction Technician II, you'll be at the heart of building and maintaining our state-of-the-art PON/fiber network. From installing buried and aerial fiber facilities to mastering construction equipment like trenchers, backhoes, end loaders, and plows, you'll make a real impact every day. You'll also install, test, troubleshoot, and repair fiber facilities to keep our customers connected. If you love working with your hands, being outdoors, and making a difference in your community, this is the role for you! Please note : This position may be filled as an Outside Plant Construction Technician I (ID ), II (ID ) or III (), based on the candidate's skills and qualifications. Separate job postings outline the minimum requirements for each role. Please review both postings and apply to any level for which you are qualified and interested. This position is eligible for a $5,000 sign-on bonus! (Payout terms apply) Schedule: This is a full-time, 40-hour-per-week role with a flexible schedule. Please note that the schedule may vary depending on the specific market. Why Join Us? As a member of our Construction and Service Enablement team at TDS, you'll play a critical role in building and maintaining cutting-edge fiber optic networks that connect communities nationwide. With over 50 years of experience, TDS is a leader in fiber internet innovation, delivering up to 10 Gigabit speeds to homes and businesses. Join our team and be part of a collaborative environment where your skills in construction, safety, and technology will directly impact the future of connectivity in urban, suburban, and rural areas. This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. Responsibilities : What We're Looking For: Self-Motivated: You're driven, ambitious, and always looking for ways to improve. Attention to Detail: You are committed to following safety protocols, and you take pride in precision, ensuring every measurement and assembly is accurate. Teamwork and Communication: You have strong communication skills and thrive in collaborative environments. Technical Proficiency: You have a solid understanding of telecommunication systems and equipment operation. What You'll Do: Perform general construction and maintenance of aerial and buried fiber facilities, ensuring compliance with maps, staking sheets, and safety standards. Operate and maintain construction equipment, including excavation tools, to build and repair outside plant fiber networks. Install, splice, test, troubleshoot, and repair fiber optic facilities using specialized equipment. Conduct cable fault acceptance tests, locate defective fiber, and resolve issues efficiently. Update GIS, maps, and as-builts; set and label infrastructure like peds, vaults, and handholes. Restore worksites to original condition upon project completion. Train and mentor team members as needed and maintain construction equipment. Provide support to field service technicians and complete required documentation promptly. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 1+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rocksaw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may inlude a background check administered by the customer. Preferred 1+ years' experience in the construction of fiber optic cable outside plant networks -OR- installation of any underground or overhead utilities will be considered. Horizontal directional drilling experience preferred. Understanding of telecommunication products and services. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Training As an Outside Plant Construction Technician II, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment. The duration of training varies based on the team assignment. Training for underground teams is 3 weeks, with an additional 1 week required for aerial training. Depending on factors such as market needs, prior skills, and team size, some individuals may only complete underground training, while others may undergo the full 4-week program, including aerial training. Physical Demands and Work Environment This role requires frequent standing, walking, kneeling, climbing, and handling equipment, with the ability to lift/move up to 50 pounds regularly and over 100 pounds occasionally. Vision requirements include close, distance, color, peripheral, depth perception, and focus. Work conditions often include exposure to outdoor weather, attics, crawl spaces, high-risk areas (e.g., high voltage, trenches, manholes), and mechanical equipment. Occasional exposure to extreme temperatures, humidity, fumes, and loud noise is expected. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here . Who is TDS Telecom? TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections . click apply for full job details

Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? Join Our Team as an Outside Plant Construction Technician I in Plymouth, WI! Are you ready to be part of a team that's transforming the way communities stay connected? Join us as an Outside Plant Construction Technician I in Plymouth, WI, where you'll play a hands-on role in building the infrastructure powering tomorrow's communication networks. From installing cutting-edge fiber optic systems to ensuring compliance with state and local regulations, this position offers the perfect blend of physical, technical, and impactful work. If you're passionate about making a difference and thrive in dynamic environments, keep reading to discover how you can shape the future with us! Please note : This position may be filled as an Outside Plant Construction Technician I (ID ), II (ID ) or III (), based on the candidate's skills and qualifications. Separate job postings outline the minimum requirements for each role. Please review both postings and apply to any level for which you are qualified and interested. This position is eligible for a $5,000 sign-on bonus! (Payout terms apply) Schedule: This is a full-time, 40-hour-per-week role with a flexible schedule. Please note that the schedule may vary depending on the specific market. Why Join Us? As a member of our Construction and Service Enablement team at TDS, you'll play a critical role in building and maintaining cutting-edge fiber optic networks that connect communities nationwide. With over 50 years of experience, TDS is a leader in fiber internet innovation, delivering up to 10 Gigabit speeds to homes and businesses. Join our team and be part of a collaborative environment where your skills in construction, safety, and technology will directly impact the future of connectivity in urban, suburban, and rural areas. This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. Responsibilities : What We're Looking For: Self-Motivated: You're driven, ambitious, and always looking for ways to improve. Attention to Detail: You are committed to following safety protocols, and you take pride in precision, ensuring every measurement and assembly is accurate. Teamwork and Communication: You have strong communication skills and thrive in collaborative environments. What You'll Do: Conduct general construction tasks in various weather conditions, adhering to safety standards. Aids in transporting construction equipment to and from the worksite. Assists with and executes the installation of aerial and buried fiber based on maps, staking sheets, and locate markings. Operates hand tools, cable locators, and testing equipment as needed. Installs and sets enclosures, including buried and aerial vaults, pedestals, and handholes. Climbs poles, ladders, towers, and other structures as required, utilizing a bucket truck when necessary. Labels and marks fiber optic and copper facilities accurately. Utilizes dispatching applications and relevant tools for project coordination. Supports fiber splicing, repairs, and outside plant maintenance activities. Restores landscapes to original condition upon project completion. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 6+ months experience in any combination of the following areas: customer service, electrical or utility construction, -OR-technical certification (or higher) -OR- current military service, or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Horizontal directional drilling experience preferred. Basic understanding of telecommunication products and services. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Training: As an Outside Plant Construction Technician I, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment. The duration of training varies based on the team assignment. Training for underground teams is 3 weeks, with an additional 1 week required for aerial training. Depending on factors such as market needs, prior skills, and team size, some individuals may only complete underground training, while others may undergo the full 4-week program, including aerial training. Physical Demands and Work Environment This role involves frequent physical activity, including standing, walking, kneeling, climbing, and lifting up to 50 pounds regularly (occasionally over 100 pounds). Vision requirements include close, distance, color, and depth perception. Work conditions often include outdoor weather, attics, crawl spaces, and high-risk areas like high voltage zones, trenches, and manholes. Exposure to heavy equipment, fumes, vibration, extreme temperatures, and loud noise is common. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here . Who is TDS Telecom? TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections, our mission is to create a better world by delivering innovative communication solutions that enhance the way people live, work, and connect. Visit to learn more! At TDS, we are committed to Equal Employment Opportunity (EEO) and value the difference of backgrounds, experiences and perspectives in our workforce . click apply for full job details

NPD Engineering Manager The New Product Development (NPD) Engineering Manager is responsible for leading the end-to-end development of innovative products from concept through production, ensuring they meet performance, quality, cost, and schedule goals. This role oversees and mentors a multidisciplinary engineering team, fostering a high-performance culture and actively developing technical talent to support both product needs. The NPD Engineering Manager plays a critical role in driving technical excellence, project execution, and cross-functional collaboration with product management, manufacturing, quality, and supply chain teams. As an NPD Engineering Manager you will: Be responsible for management of multi-facility global design teams in a Stage-Gate process. Coordinate the activities of mechanical, electrical, and manufacturing engineers to complete designs, build test units, and create documentation. Responsible for managing resources within the departmental team to be in line with workload and schedule commitments on projects, delegating/allocating tasks and responsibilities to team members Develop schedules, coordinate and manage projects of all complexity levels with little to no supervision. Responsible for preparation and monitoring of project budgets in area of responsibility. Responsible for departmental project designs meet requirements of specification and standards while promoting error-proof assembly. Responsible for coordination with specification writers to ensure project feasibility. Ensure design personnel utilize Lean design and manufacturing processes and follow good design control practices. Deliver innovate designs that meet profit, cost, quality, and time-to-market metrics. Oversee construction and testing of prototype components or assemblies as required in the development and approval process. Ensure designs follow established procedures for creation and maintenance of CAD databases and libraries. Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings. Responsible for proactively identifying and mitigating risks to the project. Be responsible for development test plan creation based on D/PFMEA and in line with project specifications, industry standards, and G&W reliability and validation requirements. Responsible for ensuring testing is in line with the test plan and meets or exceeds G&W requirements. Perform root cause analysis and troubleshooting on the new and existing products and processes Work with third party vendors and/or partners to develop high quality, lowest cost design options. Interface with purchasing and vendors in the selection and approval of component parts and assemblies. Prepare written documentation of processes, material requirements, test results and project activity as required. Create / revise G&W standards as needed. Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times. Participate in industry organizations (associations, standards committees, etc) to stay informed of and to influence industry activities. Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes. Help to train departmental teams on the application and customer use of G&W products. Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involved Develop direct reports' work skills to improve department quality, throughput and to reduce scrap/rework. Work with individuals regarding company competencies and personal growth plans. Responsible for rating performance of subordinates against job requirements, established goals, and company competencies. Coaches, mentors and influences others within departmental structure while reinforcing the corporate mission, vision, and values. Educate and mentor to develop technical skill sets. Encourage innovative thought processes and "out of the box" thinking for design and manufacturing processes. May perform other duties as assigned. As a Leader, be responsible for hire/fire decisions; performance appraisals; employee training and development; handles disciplinary problems. This job will be evaluated on these decisions. We are looking for someone who: Holds a Bachelor's degree in Electrical Engineering Has 8+ years progressive experience in Engineering design and/or development which includes: Leading highly technical and innovative projects. Desire to be constantly challenged with new problems Project management, team management, root-cause analysis and computer analysis programs Medium/high voltage electrical power systems Leading and reviewing DFMEA, PFMEA, and PPAP process and documents Leading development projects within a Stage Gate Process Possesses strong technical knowledge in the following categories per discipline: Mechanical: Molded Components and polycarbonate housings or Mechanism Design, castings, and metal fabricated parts. Electrical: Current and Voltage Sensors, Power Systems (Protection, System Analysis, and System Fault Response) Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers. Has excellent communication and mentoring skills. Has proven experience with computers; Microsoft Office, Microsoft Project or equivalents. Preferably has been a published author and/or involvement in industry publications. Ideally has a history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies. What we offer you: Typical pay is $111,828 - $160,000 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Calgon Carbon A Kuraray Company is growing-and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: CNC Plasma Table Programmer Location: Equipment & Assembly Plant - Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hours/Week The CNC Plasma Table Programmer will create programs for the CNC Plasma table, plate roll and press brake machines utilizing part nesting software. The CNC Plasma Table Programmer will create files and daily nesting plans for the CNC plasma table. The CNC Plasma Table Programmer ensures all materials are routed properly and that enough nested jobs are prepared to keep machines running. Duties and Responsibilities (not limited to) Monitor and maintain inventory of drop materials to maximize utilization of materials to include reducing scrap generated during processing Cycle count plate inventory and maximize utilization through nesting, ensuring strategic consumption of raw materials. Compare on hand material to SAP counts Reads and interprets manufacturer drawings and creates CNC files for plasma cutting tables, plate rolls and brake press to produce parts for fabrication Qualifications High school diploma or general education degree (GED) is required Associates degree (A.A.), or equivalent from two-year college or technical school is preferred 0-2 years 1 year of experience drafting or CNC programming is required 0-2 years 1 year of experience with AUTOCAD 2D is required 0-2 years 1 year of experience with SAP is required 0-2 years 1 year of experience with .DXF, .DWG and various print file types is required 0-2 years 1 year of experience building spreadsheets in Microsoft Excel is required Auto CAD CAM Software is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran PIb498e6d278a2-8695

Aerodyne Industries is a dynamic, rapidly growing engineering and information technology services firm headquartered on Florida's exciting Space Coast. With locations throughout the US, we take pride in delivering small business agility with large corporation capabilities. Our list of clients count on us to prepare NASA's Missions to the Moon and Mars and to defend our nation supporting the Missile Defense Agency and Department of Defense. Join the adventure of a lifetime by becoming a teammate with Aerodyne Industries and work on projects that will define our future. Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a System Engineer EVA Tools to join the team with JETS II. We are actively searching for qualified candidates for this potential opening; however, we do not have assurance at this time when the position will be finalized and opened. Because we have strong reason to believe the position will be approved soon, we are proceeding with identifying qualified candidates and conducting interviews. The System Engineer EVA Tools will: Participate in trade studies and analyses that will influence the design and performance of the hardware used for exploration and sample curation during Lunar excursions. Perform requirements decomposition and develop requirements documents Develop verification and validation plans and statements Develop interface control documents Review and provide comments on program documentation Coordinate with Artemis system management teams Work in a team environment and report to the team lead to provide status on progress and issues and for support Perform other duties as required Resumes, in month and year format, must be submitted with application in order to be considered for the position. Qualifications - External Requisition Qualifications: This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area. Experience with the development of requirements documents including functional requirements and verification success criteria Experience with the design, assembly, testing, verification, and operation of hardware Basic knowledge of commonly-used concepts, practices, and procedures in a hardware field, such as mechanical and electrical system design, engineering drawings and sketches, material selection, and design of software and tools Ability to prepare written documents and to verbally present at various meetings Familiarity with Microsoft Office products Requisition Preferences: BS degree in engineering from an accredited engineering school and two (2) years of direct engineering experience. Familiar with Johnson Space Center (JSC) organizations, processes, and procedures Experience with development of EVA hardware Experience with Systems Engineering processes and techniques Why Join Our Team? In addition to exciting career opportunities, we also have: Excellent personal and professional career growth 9/80 work schedule (every other Friday off), when applicable Onsite cafeteria (breakfast & lunch) Much, much more! Additional Information Proof of U.S. Citizenship or US Permanent Residency may be a requirement for this position. Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Essential Functions Work Environment Generally, an office environment, but can involve inside or outside work depending on task. Physical Requirements Work may involve sitting or standing for extended periods (90% of time). May require lifting and carrying up to 25 lbs. (5% of time). Equipment and Machines Standard office equipment (PC, telephone, printer, etc.). Attendance Regular attendance in accordance with the established work schedule is critical. Ability to work outside normal schedule and adjust schedule to meet peak periods and surge requirements. Other Essential Functions Professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. US EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status . PI0c5bcd59326d-3990

NPD Engineering Manager The New Product Development (NPD) Engineering Manager is responsible for leading the end-to-end development of innovative products from concept through production, ensuring they meet performance, quality, cost, and schedule goals. This role oversees and mentors a multidisciplinary engineering team, fostering a high-performance culture and actively developing technical talent to support both product needs. The NPD Engineering Manager plays a critical role in driving technical excellence, project execution, and cross-functional collaboration with product management, manufacturing, quality, and supply chain teams. As an NPD Engineering Manager you will: Be responsible for management of multi-facility global design teams in a Stage-Gate process. Coordinate the activities of mechanical, electrical, and manufacturing engineers to complete designs, build test units, and create documentation. Responsible for managing resources within the departmental team to be in line with workload and schedule commitments on projects, delegating/allocating tasks and responsibilities to team members Develop schedules, coordinate and manage projects of all complexity levels with little to no supervision. Responsible for preparation and monitoring of project budgets in area of responsibility. Responsible for departmental project designs meet requirements of specification and standards while promoting error-proof assembly. Responsible for coordination with specification writers to ensure project feasibility. Ensure design personnel utilize Lean design and manufacturing processes and follow good design control practices. Deliver innovate designs that meet profit, cost, quality, and time-to-market metrics. Oversee construction and testing of prototype components or assemblies as required in the development and approval process. Ensure designs follow established procedures for creation and maintenance of CAD databases and libraries. Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings. Responsible for proactively identifying and mitigating risks to the project. Be responsible for development test plan creation based on D/PFMEA and in line with project specifications, industry standards, and G&W reliability and validation requirements. Responsible for ensuring testing is in line with the test plan and meets or exceeds G&W requirements. Perform root cause analysis and troubleshooting on the new and existing products and processes Work with third party vendors and/or partners to develop high quality, lowest cost design options. Interface with purchasing and vendors in the selection and approval of component parts and assemblies. Prepare written documentation of processes, material requirements, test results and project activity as required. Create / revise G&W standards as needed. Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times. Participate in industry organizations (associations, standards committees, etc) to stay informed of and to influence industry activities. Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes. Help to train departmental teams on the application and customer use of G&W products. Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involved Develop direct reports' work skills to improve department quality, throughput and to reduce scrap/rework. Work with individuals regarding company competencies and personal growth plans. Responsible for rating performance of subordinates against job requirements, established goals, and company competencies. Coaches, mentors and influences others within departmental structure while reinforcing the corporate mission, vision, and values. Educate and mentor to develop technical skill sets. Encourage innovative thought processes and "out of the box" thinking for design and manufacturing processes. May perform other duties as assigned. As a Leader, be responsible for hire/fire decisions; performance appraisals; employee training and development; handles disciplinary problems. This job will be evaluated on these decisions. We are looking for someone who: Holds a Bachelor's degree in Electrical Engineering Has 8+ years progressive experience in Engineering design and/or development which includes: Leading highly technical and innovative projects. Desire to be constantly challenged with new problems Project management, team management, root-cause analysis and computer analysis programs Medium/high voltage electrical power systems Leading and reviewing DFMEA, PFMEA, and PPAP process and documents Leading development projects within a Stage Gate Process Possesses strong technical knowledge in the following categories per discipline: Mechanical: Molded Components and polycarbonate housings or Mechanism Design, castings, and metal fabricated parts. Electrical: Current and Voltage Sensors, Power Systems (Protection, System Analysis, and System Fault Response) Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers. Has excellent communication and mentoring skills. Has proven experience with computers; Microsoft Office, Microsoft Project or equivalents. Preferably has been a published author and/or involvement in industry publications. Ideally has a history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies. What we offer you: Typical pay is $111,828 - $160,000 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor