22 jobs found

Field Service Engineer II US-CA-San Jose Job ID: 33523 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations. This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time.Troubleshoot hardware and software related issues and implement solutionsCollect data for software related issues and discuss with headquarter in Japan.Accurately document all maintenance activity and provide field service reports.Install equipment control software and maintain record of software revision history.Participate in the installation of equipment at customers' sites.Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work.Provide training and assistance to other technicians.Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees,Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring HS Diploma, GED, or equivalent experience required. AA OR BS degree in a related field is preferred, plus 1-2 years of related experience (i.e. FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferredAbility to understand electrical and mechanical drawings for troubleshootingExperience with PLC and other software applications is a plusAbility to work independently following 3-6 months of on the job trainingMust have analytical skills for problem analysis and resolutionDecide on problem solving road map and follow methodical means to resolutionDecide and recommend spare and consumable parts for PM's and repairsJob may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesPosition may require ability to work flexible shiftsRequires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $29.20 - $43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI132fc93117a0-1192

85436BR Sr. Food Service Worker, Per Diem NUTRITION SERVICES Per Diem 85436BR Job Summary This person works as a team to provide patient food service that is safe, accurate, timely and responsive to the patient's needs. Food service includes stocking and serving portion controlled hot and cold food, replenishing stations, restocking work stations, assembly, delivery and collection of patient trays. The person maintains cleanliness and sanitation of the work stations and equipment. This position is responsible for providing excellent patient and nursing interactions and is looked upon as the ambassador for the department of Nutrition and Food Services. The final salary and offer components are subject to additional approvals based on UC policy. Your placement within the salary range is dependent on a number of factors including your work experience and internal equity within this position classification at UCSF. For positions that are represented by a labor union, placement within the salary range will be guided by the rules in the collective bargaining agreement. The salary range for this position is $32.18 - $32.18 (Hourly Rate). To learn more about the benefits of working at UCSF, including total compensation, please visit: Required Qualifications High School diploma or equivalent A minimum of 2 years of customer facing experience within the food service, hospitality or retail industries. Read, write, follow written or oral instructions and be understood in English. Basic computer skills. This position requires flexibility to orient and work at all UCSF Medical Center locations. Ability to meet physical demands involved with job duties as outlined below Preferred Qualifications Two years of college or equivalent State of California Food Handler certification or Servsafe certification About UCSF At UCSF Health, our mission of innovative patient care, advanced technology and pioneering research is redefining what's possible for the patients we serve - a promise we share with the professionals who make up our team. Consistently ranked among the top 10 hospitals nationwide by U.S. News & World Report - UCSF Health is committed to providing the most rewarding work experience while delivering the best care available anywhere. In an environment that allows for continuous learning and opportunities for professional growth, UCSF Health offers the ideal atmosphere in which to best use your skills and talents. Pride Values UCSF is a diverse community made of people with many skills and talents. We seek candidates whose work experience or community service has prepared them to contribute to our commitment to professionalism, respect, integrity, diversity and excellence - also known as our PRIDE values. In addition to our PRIDE values, UCSF is committed to equity - both in how we deliver care as well as our workforce. We are committed to building a broadly diverse community, nurturing a culture that is welcoming and supportive, and engaging diverse ideas for the provision of culturally competent education, discovery, and patient care. Additional information about UCSF is available at diversity.ucsf.edu Join us to find a rewarding career contributing to improving healthcare worldwide. Equal Employment Opportunity The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. Organization Health Job Code and Payroll Title 005095 MED CTR FOOD SVC WORKER SR PD Job Category Allied Health Bargaining Unit American Federation of State, County and Municipal Employees - Service Unit (AFSCME-SX) Employee Class Per Diem Percentage 20% Location San Francisco, CA Campus St. Mary's Work Style Fully On-Site Shift Days, Evenings, Weekends, Variable Shift Length 8 Hours At UCSF Health, we are proud of the many talented, knowledgeable and dedicated employees who have helped build our tradition of excellence in health care. As testament to the quality of our entire team, UCSF Medical Center is consistently ranked among the best hospitals in the nation by U.S. News & World Report. Our team includes doctors, nurses and other health professionals, as well as many others who support their work, from accounting to food services to strategic planning. Working at UCSF UC San Francisco is virtually an industry of its own. As a growing organization comprised of the university campus, UCSF Health, and UCSF-affiliated hospitals, we are one of the largest employers in the region. We invite you to explore one of the many employment opportunities that support our mission of advancing health worldwide. UCSF seeks motivated and talented individuals for opportunities ranging from academic appointments for faculty scientists and scholars, health care professionals, managerial and administrative positions, as well as service industry jobs such as shuttle bus drivers, custodians and cafeteria workers. Our culture is one of professional growth and passion for the communities we serve. You can read about our PRIDE values .

SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". Role and Responsibilities This position is accountable for supporting field operations at assigned project location. Employees operate a variety of friction or hydraulic lattice boom cranes ranging from 50 ton to 150 ton in the construction or repair of barges, boats, and/or ferries. Works as assigned by the Project Manager and/or Barge Repair Supervisor(s) to assist the project team in ensuring timely and successful completion of Barge Repair project. Typically, they will work closely with Welders, Laborers, and/or other skilled or semi-skilled craft workers. Night Shift will train during the day shift for the first few weeks. Must be available for overtime and weekends Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Operates assigned heavy equipment in a safe and effective manner to minimize the risk of injury, property damage, or loss of life. Maneuvers and positions loads over designated areas in a smooth, safe manner. Utilizes load charts to ensure lifts are performed within the determined load and radius capabilities of the crane. Assists in the assembly and disassembly of the crane installation of boom and hoisting cables on the crane. Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment. Performs daily equipment inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.; Advises Foreman of any requirements for maintenance or repairs. Ensures that crane is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation. Ensures the crane has adequate ground bearing capacity to ensure the stability of the crane throughout lifting activities. Is responsible for all rigging and the method in which loads are rigged. Works closely with site management and workers to complete projects in a safe, efficient, and timely manner. Performs crane operator duties and rigging functions associated with lifting operations. Makes precise load placements where exact movements are necessary to position the load accurately and safely under complex and adverse conditions. Works with and assists crew in excavation activities which may include hoisting material, tools, equipment, and/or any related work. Performs other related duties as assigned. Participates in Safety and Environmental initiatives that will contribute to compliance of State/Federal regulations and improve existing Company programs. Responsible and accountable for employee's own personal safety, as well as the safety of all co-workers and any others employee encounters. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed; Alerts Foreman, Safety Officer, or Human Resources to observed safety issues. This position may require long hours and weekend work. Qualifications and Education Requirements 3-5 years' experience operating hydraulic cranes required; High school diploma or equivalent; or minimum of three (3) years' related experience and/or training, or equivalent combination of experience, education, and/or training which provides the necessary crane operator skills, knowledge and abilities is required. The employee must: Demonstrate ability to operate equipment in a safe and responsible manner. Demonstrate knowledge of construction rigging standards: use of slings, cable chokers, spreader bars, multi-part load blocks, etc. Demonstrate ability to read, understand and use crane load charts to determine load and radius capabilities of assigned equipment. Demonstrate ability to follow instructions and make decisions based on safety and operational standards of assigned equipment. Demonstrate ability to read and write. Competencies: Stress management/Composure, Communication proficiency, Teamwork orientation, Results driven Knowledge of proper use of equipment, materials, and supplies used on Barge Repair projects. Demonstrated ability to problem-solve and draw conclusions. Working knowledge of Shipyard operations preferred. Preferred Skills PHYSICAL/MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The employee frequently works near moving mechanical parts, and regularly works in outside weather conditions. The individual must properly utilize appropriate personal protective equipment (PPE) as required. This includes hard hat, safety glasses, reflective vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being conducted. In addition, Crane Operators must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Accessing and exiting machines safely. Standing, stooping, bending, crouching, kneeling, squatting, climbing, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing vertical ladders of a height of 6ft or greater. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; 20/20 vision (naturally or with corrective lenses). Must be able to pass Crane Operator Physical. PIf26b40fe0efa-5768

Field Technician III The Field Technician II will safely set, maintain, repair and operate multiple types of natural gas compressors in their respective area for Park Energy Services. Duties & Responsibilities Read gas meters and instrumentation recording the amounts of gas received/delivered/consumed and report any operational, temperature and pressure changes as needed in operating logs Watch gauges, dials or other indicators to make sure equipment is working properly Set units and perform start-up procedures on location Maintain replacement/repair parts for assigned units Assist with overhaul of engines, compressors and related components Assist in disassembly and removal of unit from location Use hand tools to clean, lubricate, adjust equipment, replace filters, gaskets and other items while identifying what kind of maintenance is needed Use electronic devices for troubleshooting, testing or commissioning equipment Coordinate and assist with scheduled and unscheduled equipment repair and maintenance Will have call-out rotation responsibilities and respond to unscheduled service calls Submit accurate maintenance reports and other necessary paperwork Maintain a current and valid driver's license Other duties as assigned Skills & Competencies Working knowledge of pneumatic and electric starters, electrical systems, fuel systems, cooling systems, lubrication systems, ignition systems and other compression related anatomy Working knowledge of different types of engines and compressors - operations, maintenance and troubleshooting Understand the basic operations of production equipment such separators, dehydrators, etc. Proficient with Microsoft Office Suite and ability to learn and efficiently utilize other software tools and applications that are beneficial to the position Communicate information effectively with all levels of co-workers by phone, email or in person Able to work independently or with others Education & Experience High school diploma or GED is preferred 2+ years mechanical experience on engines and/or other mechanical equipment Prefer experience with modern engines and compressors used in the natural gas industry, including modern electronic engine controls PI75e05a115b36-5679

Trainer/Course Development (Technical/Semiconductor) US-CA-San Jose Job ID: 33547 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA San Jose Branch About the Role Based in our San Jose office, you will develop and deliver training on industrial products (photolithography equipment). Not only will you prepare lesson plans, but also partner with customers and internal members to implement training as well as maintain equipment in the cleanrooms and training facilities to ensure equipment availability for training and demonstrations. This is an exciting opportunity to combine your technical expertise with your course development and training skills. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Conduct user training on Photolithography products both in-house and at customer sitesProvide classroom and laboratory training for internal and external customer training courses that includes but not limited to operation, preventive maintenance, application, and installation aspects of Canon photolithography equipmentDevelop new internal and external technical materialsRevise existing internal and external technical materials to ensure technical materials are current and accurateVerify accuracy of technical procedures to support field service technicians and customer needsProvide detailed presentations on technical topicsResponsible for operation, and maintenance of the training facilities and training equipment and preparation of the instructional site in the San Jose facility Participate in discussion groups as needed, to share technical information and improve technical knowledge of less experienced colleaguesContact customers to discuss training needs and acquire feedback from customers on current training programs and systems About You: The Skills & Expertise You Bring Requires a Bachelor's degree in a relevant technical field or equivalent experience and 3-5 years of related work experienceSemiconductor equipment, maintenance knowledge preferred, photolithography equipment knowledge helpfulPrior experience as a technical trainer preferredMay require up to 50% travel within the US (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesAbility to work flexible shiftsProficiency with Word, Excel, and PowerPointPhysical Demands & Work EnvironmentThe worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working in office environment and also in cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) In accordance with applicable law, we are providing the anticipated base salary for this role $70,310- $103,770 Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIf309f-6059

Colliflower Inc/Randall Pressure Systems, a leading Parker Hannifin distributor of hoses and fittings is seeking a motivated and Bilingual (Spanish & English) Store Manager Trainee in our Geneva, IL location. Since 1951, we've been committed to exceeding expectations within the fluid connector industry. This is an exciting opportunity to launch a rewarding career with Colliflower and get your foot in the industry. Education and training will include business operations, customer service, inventory, sales, product, hose assembly, facility management and other areas of a Colliflower store. Schedule: Monday-Friday, 8:00 AM-5:00 PM Compensation & Benefits Competitive pay based on an individual's industry knowledge, skills, experience, and location. Overtime Pay - Referral Bonus - Company Wide Sales Goal Awards - Premium Pay for after hour services Paid time off (including 2 weeks paid vacation, 40 hours of sick, 6 paid holidays) Medical, Dental, Vision options for employee, spouse and family Life, LTD, AD&D Insurance Flexible Savings Accounts for Medical Expenses 401K with Company Match Key Responsibilities Customer Service Respond to internal and external customer inquiries in a timely, professional & courteous manner Identify proper product solution for customer under the guidance of the Store Manager Address customer issues and resolve under the guidance of the Store Manager Use the Colliflower's Vision and Guiding Principles in handling all customer interactions Provide potential sale leads and information to Store Manager; actively participate in customer capture programs Start and engage in Colliflower's internal training programs within three months of start date Actively promote all company products and services Hose Assembly & Facility Management Assemble product and crimp hoses to manufacturer's recommendation under guidance of the Store Manager Assist Store Manager with waste and cost reduction Perform duties related to maintaining a safe, organized, and clean store Assist Store Manager with routine facility maintenance Inventory & Product Management Handle deliveries, unpack product, stock and cleans shelves Perform inventory projects as directed by Store Manager Track inventory and order product Maintain product displays Perform shipping/receiving duties Administration Process sales transactions Assist Store Manager with recording transactions related to invoices, stock transfers, and inventory levels Consistently and accurately complete timecard Ensure that intellectual property is confidential, maintained, and secure Perform other duties as required by Store Manager or Regional Support Manager Qualifications and Skills Bilingual - Spanish required Possess good customer service skills Possess proficient oral and written communication skills Have a mechanical aptitude Possess a quality work ethic Possess proficient organizational skills Possess proficient math skills; ability to read and interpret tape measure and know/learn metrics Physical Requirements Must be able to lift, push & pull up to 150lbs Regularly required to stand, walk, bend, stoop, kneel, reach, push, pull, and climb Manual dexterity required to operate machinery and tools Work Environment Work performed in a workshop environment Routinely uses standard office equipment (i.e.: computers, phones, fax machines) as well as hand and power tools (i.e.: hose saws, pliers, box cutters, tape measure, and crimping machine) Exposed to several elements but with none present to the extent of being disagreeable (i.e.: noise from equipment and occasional odor that comes from cutting rubber hose) Colliflower, is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Applicants can view postings by clicking the links: E-Verify & Right to Work Equal Employment Opportunity Family Medical Leave Act Employee Polygraph Protection Act Pregnancy Fairness Workers Act Powered by JazzHR Compensation details: 18 Hourly Wage PI25f59208a7c6-8987

JOB SUMMARY Industrial Engineer I will support the Industrial Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES Monitor and continuously improve daily quality/efficiency performance for assigned areas. Design and procure production tooling, processing equipment and workstations. Coordinate layout and workstation move activities. Prepares time estimates for proposed projects and evaluates time factors. Minimize change over time by ensuring programs use common set-ups where possible. Verify that machine maintenance is being performed on schedule. Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations. Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations. Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS Key Requirements: o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.) o Understanding of Jabil's global strategies and direction o Understanding of site's facilities, capabilities and how they tie back to the Jabil strategies and direction o Strong analytical ability o Able to implement continuous improvements and cost reduction programs o Good communication skills Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Description: THIS IS AN ON-SITE POSITION LOCATED IN STREETSBORO OHIO About Us: LayerZero Power Systems Inc. is a globally recognized leader in providing state-of-the-art power distribution solutions for critical industries. With a strong focus on reliability, innovation, and customer satisfaction, we deliver advanced power systems products that ensure uninterrupted and dependable power supply in mission-critical environments. Our customer base is comprised of companies in the data center (our focus), financial, computer service provision, and semiconductor manufacturing sectors. LayerZero Power Systems is on a trajectory of sustained growth, with a loyal customer base of existing Fortune 100 customers and an expanding portfolio of new customers. Position Description: Test Technician The Test Technician at LayerZero Power Systems, Inc. will be responsible for implementing appropriate test methods, utilizing necessary test equipment, implementing test procedures and software, and providing a lead role in the testing of newly developed products and standard production testing. The Test Technician will operate on all types of test instruments and will have limited supervision. LayerZero Power Systems, Inc. is looking for an intelligent, detail-oriented, dependable worker with excellent documentation skills to join our team. Requirements: Primary Duties: Inspection and testing of electrical/electronic power equipment, transformers, circuit breakers. Troubleshooting of AC and DC power and control circuits up to 480V Perform occasional repairs of control, power and fiber optic assembly, crimping and routing Programming electronic devices, interfacing with computer and programs on computer. Completing test reports and documentation using computer, keyboard, paperwork. Manipulating objects, tools and controls Includes standing for extended periods of time, as well as reaching, bending and kneeling Experience & Skills: Proficient with Voltmeter and current meter Read and understand schematics, wiring diagrams, and mechanical drawings Experience using hand tools Experience with use and maintenance of electrical PPE Experience with Lock-out/Tag-out and other standard electrical safety procedures Computer experience; Excel, Word, file manipulation Experience with electrical parts assembly and/or wiring preferred Electrical troubleshooting of electrical component and electronics Use of measurement tools Demonstrated oral and written communication skills. Some programming knowledge a plus Some knowledge of the NEC code preferred Education: Associate's degree in Electrical Engineering Technology or 2 years minimum experience in the power industry What We Offer: Competitive pay with performance incentives 100% company-paid medical, dental, and vision 401(k) with company match 3 weeks PTO, 8 paid holidays, and 2 floating holidays Why You will Love Working with Us: Impact: Develop your skills and expertise in a rapidly growing industry, with your work directly influencing the success of mission-critical projects. Innovation: immerse yourself in an environment that celebrates forward thinking and continuous improvement. Collaborative spirit: Work closely with engineers, marketers, and other professionals to bring ideas to life. Grow with us: We are committed to your personal and professional development, offering endless opportunities to improve your skills and advance your career. At LayerZero, we are proud to be an Equal Opportunity Employer. We welcome and celebrate diversity, and we are committed to creating an inclusive environment for all employees. Compensation details: 27-30 Hourly Wage PIf8a1961ee2a3-1501

Field Service Engineer II - Semiconductor US-CA-San Jose Job ID: 33153 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations. This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time.Troubleshoot hardware and software related issues and implement solutionsCollect data for software related issues and discuss with headquarter in Japan.Accurately document all maintenance activity and provide field service reports.Install equipment control software and maintain record of software revision history.Participate in the installation of equipment at customers' sites.Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work.Provide training and assistance to other technicians.Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees,Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring HS Diploma, GED, or equivalent experience required. AA OR BS degree in a related field is preferred, plus 1-2 years of related experience (i.e. FSE or Technician position in a semiconductor equipment company or a technical position in the engineering field) PVD or semiconductor vacuum equipment experienceMulti chamber cluster systems and robotics experience is highly preferred Ability to understand electrical and mechanical drawings for troubleshootingExperience with PLC and other software applications is a plusAbility to work independently following 3-6 months of on the job trainingMust have analytical skills for problem analysis and resolutionDecide on problem solving road map and follow methodical means to resolutionDecide and recommend spare and consumable parts for PM's and repairsJob may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesPosition may require ability to work flexible shiftsRequires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems.We are providing the anticipated rate for this role : $29.20 - 43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI0fd3bb5-

Field Service Engineer I - Semiconductor US-OR-Gresham Job ID: 33692 Type: Full-Time # of Openings: 1 Category: Engineering Additional Locations CUS About the Role Canon U.S.A., Inc. has an exciting opportunity in Oregon to support our photolithography equipment customers and enable them to utilize cutting edge technology in their semiconductor manufacturing process. You will be trained to support Canon's lithography equipment (steppers and scanners). This position will be based in Oregon but will also travel to support other US locations. NOTE: Weekly scheduled hours will vary 35 - 40 hours/week with occasional overtime as needed. Your Impact Install, repair, calibrate and maintain semiconductor process equipment while minimizing equipment down time. Escalate advanced repairs as needed, to senior level technicians. Monitor, inspect and maintain semiconductor equipment in order to prevent and minimize malfunctions. Maintain accurate documentation of maintenance activity and provide periodic reports Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work. Provide training and assistance to technicians and may provide basic instruction to customers. Participate in ongoing technical training to expand technical expertise. About You: The Skills & Expertise You Bring Please note: This is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. HS diploma, GED, or equivalent experience required, plus less than 1 year of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field). Lithography experience is beneficial but not required and experience on high precision equipment helpful.May require upwards of 40% overnight travel (valid driver's license and acceptable driving record necessary). Requires MS Word, Excel, and PowerPoint. Position will require travel to other offices/customer sites within the US. Requires ability to work flexible shifts, compressed workweeks. This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies. Requires ability to lift up to 30 pounds individually and for lifting over 30 pounds assistance may be available.Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time.Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder.The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses).The work environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways.The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $27.88 - $41.75 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIaf9c712098f0-3695

SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". JOB SUMMARY This position is accountable for supporting field operations at assigned project location. Employees operate a variety of friction or hydraulic lattice boom cranes ranging from 50 ton to 150 ton in the construction or repair of barges, boats, and/or ferries. Works as assigned by the Project Manager and/or Barge Repair Supervisor(s) to assist the project team in ensuring timely and successful completion of Barge Repair project. Typically, they will work closely with Welders, Laborers, and/or other skilled or semi-skilled craft workers. LOCATION: Galveston. ( 1002 Texas Clipper Rd, Galveston, TX 77554 ) BENEFITS : Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES: Operates assigned heavy equipment in a safe and effective manner to minimize the risk of injury, property damage, or loss of life. Maneuvers and positions loads over designated areas in a smooth, safe manner. Utilizes load charts to ensure lifts are performed within the determined load and radius capabilities of the crane. Assists in the assembly and disassembly of the crane installation of boom and hoisting cables on the crane. Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment. Performs daily equipment inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.; Advises Foreman of any requirements for maintenance or repairs. Ensures that crane is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation. Ensures the crane has adequate ground bearing capacity to ensure the stability of the crane throughout lifting activities. Is responsible for all rigging and the method in which loads are rigged. Works closely with site management and workers to complete projects in a safe, efficient, and timely manner. Performs crane operator duties and rigging functions associated with lifting operations. Makes precise load placements where exact movements are necessary to position the load accurately and safely under complex and adverse conditions. Works with and assists crew in excavation activities which may include hoisting material, tools, equipment, and/or any related work. Performs other related duties as assigned. Education, Experience and Training: 3-5 years' experience operating hydraulic cranes required; High school diploma or equivalent; or minimum of three (3) years' related experience and/or training, or equivalent combination of experience, education, and/or training which provides the necessary crane operator skills, knowledge and abilities is required. The employee must: Demonstrate ability to operate equipment in a safe and responsible manner. Demonstrate knowledge of construction rigging standards: use of slings, cable chokers, spreader bars, multi-part load blocks, etc. Demonstrate ability to read, understand and use crane load charts to determine load and radius capabilities of assigned equipment. Demonstrate ability to follow instructions and make decisions based on safety and operational standards of assigned equipment. Demonstrate ability to read and write. Competencies: Stress management/Composure, Communication proficiency, Teamwork orientation, Results driven Knowledge of proper use of equipment, materials, and supplies used on Barge Repair projects. Demonstrated ability to problem-solve and draw conclusions. Working knowledge of Shipyard operations preferred. Special Requirements/Knowledge, Skills and Abilities: Must have good communication skills and take good directions from yard manager. Understanding of company quality and environmental manuals and procedures described therein. Must have or be eligible for TWIC card. Physical/Environmental Requirements: Barge chemical environment requires prolonged kneeling, standing, walking, twisting, climbing, and the ability to lift and carry in access of 120 lbs, assisted. Ability to work in varied conditions (i.e.: heat, cold, rain, ice, snow, etc.), inside and outside. Ability to work in confined space/heights and operate equipment safely and efficiently. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an "at-will" basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP. PI2c5915fe5-

Description: Hayfield Window & Door is a growing manufacturer of premium quality vinyl windows and consistently ranks as a Top 100 Window and Door Manufacturer in North America. We have an immediate opening for a Maintenance Tech in our manufacturing facility and are looking for hard working, dependable individuals who possess carpentry or mechanical skills to join our team. Benefits of working for Hayfield Window and Door: Medical, Dental and Vision insurance 401(k) plan Accrued Paid time off - 104 accrued hours available for new hires! Paid Holidays On the site training Opportunity to grow The Maintenance Technician performs general maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems. Essential Functions: Inspects and identifies equipment or machines in need of repair and Troubleshoots issues to determine necessary repairs. Prepares work by studying assembly instructions, specifications, and parts lists. Gathering parts, sub-assemblies, tools, and materials to complete assigned tasks. Assembles components by examining connections for correct fit, fastening parts and subassemblies. Verifies specifications by measuring completed component. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Engage in related support functions that impact machine's ability to run orders. Schedule and complete preventative maintenance of equipment, including inspecting, calibrating, safety checks, repair/replace broken or worn-out components. Troubleshoot equipment failures or breakdowns. Basic electronic knowledge and multimeter use. Perform maintenance on the facility, including plumbing, electrical and structural repairs/modification. Upgrade, modify or adjust all machines and/or existing guarding to increase safety. Follow all safety rules, including lockout/tagout, regulations, machine guidelines and guarding while starting, working on preventive maintenance, and cleaning machines. Wear required PPE to maintain safety and adhere to all safety procedures and processes. Can accurately read a tape measure. Ability to follow instructions from supervisors or senior maintenance workers. Knowledge of general carpentry and repair. Excellent organizational and time management skills. Other duties as assigned Requirements: Physical Requirements: Must be physically capable of lifting 75 lbs. Ability to frequently sit, stand, walk, reach within hand, and arm length, stoop, kneel, and crouch. Full hand dexterity. Must be able to stand on your feet for extended periods of time. Skills: Analytical, logical, and detailed thought process. Ability to read/troubleshoot form electrical schematics. Read and build from fabrications drawings. Knowledge of manufacturing processes. Knowledge of pneumatic systems, electronic cards, and basic welding skills. Intermediate computer competency with Microsoft Office programs. Effective time management. Teamwork - Ability to work well within and across functional departments. Good oral and written communication. Innovative thinking. Entry Level Qualifications: High school diploma or equivalent required. Related experience preferred. On-the-job training offered. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Hayfield Window and Door provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. PIc0c7dae8636d-5613

Position Title: Project Manager - Process Pipe Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY The Project Manager must work safely and productively on various sized Industrial project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Project Manager position. All employees are expected to communicate, always build relationships with other team members, and use good judgment. The Project Manager is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned ESSENTIAL DUTIES • Inform construction administration of project management assignment. Ensure procurement and/or completion of the following: o Required Bonding o Required Insurance o Project Directions (Map) o Project Files o Viewpoint Job Template Setup o Business License Requirements • Upon assignment of project - schedule and attend pre-construction handoff meetings to receive project information. • Review building plans and specifications, estimate, estimating proposals, and client contract. • Analyze project risks • Develop overall plan to complete contracted work in conjunction with Superintendent • Gather and organize the following information for future use: o Contracted Scope of Work o Project Safety Concerns o Material Quantity Takeoffs o Design Deficiencies o Potential Design/Construction Changes o Potential Schedule and Cost Impacts • Coordinate assembly of project budget derived from Estimate. • Work with the Project Superintendent to prepare project schedule. • Coordinate preparation of Site Specific Safety Plan • Conduct project Kick Off meeting with WBC project team to discuss all Project needs. • Coordinate material vendor selection and buyout process. • Ensure that all required submittals are collected, reviewed for compliance with contract documents, and submitted to the client for review. • Ensure that all building materials, equipment, and supplies are available to the WBC Superintendent for the project. • Coordinate the provision of adequate craft-level employees necessary to complete the job effectively, efficiently, and safely. • Ensure that the project layout process is planned and conducted properly. Coordinate project needs with Superintendent and field engineering staff • Review all plan and scope of work changes and Facilitate the change order process. Work with Superintendent to ensure project milestones are met. • Monitor quality control. • Monitor construction progress and actual costs versus budget. Frequently review information with Superintendent. Monitor labor production rates for significant phase codes of work. In cooperation with Superintendent, continuously analyze, trouble shoot, and attempt to improve construction processes. • Ensure that all work is performed in strict compliance with WBC Safety Manual, Site Specific Safety Plan, OSHA requirements, and Client requirements. • Assist WBC Superintendent(s) with troubleshooting and solving any special problems as they arise on the job site. • Review all material, service, and equipment invoices associated with assigned projects for correctness. • Review project timesheets and production reports weekly or more often as needed to track project activity. • Analyze actual job costs and estimate future cost. • Complete revenue projections. • Analyze percentage of work complete on each assigned project and prepare Progress Invoice to the client for each billing period. • Attend Project Coordination meetings for each assigned project. Participate as project team member to assist in coordinating, scheduling work. Represent Wayne Brothers Inc.'s interest and the interests of the project team. • Coordinate successful closure of assigned projects. • For major projects, conduct Post Project Review Meeting • Attend weekly internal Operations Team meeting and Participate as a team player. • Support continuing education and internal training opportunities for employees • Assist Business Development • Assist Estimating • Assist with Strategic Planning • Assist Executive Management Team with any assignments • Function as Mentor for WBC team. • Cultivate a positive working relationship between WBC, Clients, Subcontractors, and Vendors. • Coordinate, manage, and communicate with all subcontractors • Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. • Ensure that a safe, accident/incident- free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience Minimal 2-year Associate degree in Mechanical Engineering Technology or other related field 4-year Bachelor's Degree - preferred Minimum 5 years related experience - Required Knowledge, Skills and Abilities Required Planning Organizing Coordinating Analyzing and interpreting Data Problem Solving Negotiating Writing, speaking, listening Motivating Work effectively under pressure Analyze situations objectively Cultivate and nurture positive relationships with employees, vendors, and clients Effective at dealing with difficult people and situations Utilitarian Able to forecast future costs with reasonable accuracy Good math/geometry/trigonometry skills Proficient at adding/subtracting/calculating measurements, areas, and volumes Certificates, Licenses, Registrations • Valid Driver's License - Required • OSHA 10-Hour Certification - Required; training provided by Wayne Brothers Physical Demands Sitting for Long Periods of Time including at desk, at plan table, and in vehicle Climbing Ladders or working at heights or in confined spaces occasionally Wearing fall protection occasionally Driving for an extended period of time (1-8 hours) Work extended or occasionally odd hours Walking across uneven terrain and over surfaces under construction frequently Typing frequently Talking on telephone frequently Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI9865edaf3f7d-7281

Position Title: Project Manager - Process Piping Group Date Posted: 09/26/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY The Project Manager must work safely and productively on various sized Industrial project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Project Manager position. All employees are expected to communicate, always build relationships with other team members, and use good judgment. The Project Manager is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned ESSENTIAL DUTIES Inform construction administration of project management assignment. Ensure procurement and/or completion of the following: o Required Bonding o Required Insurance o Project Directions (Map) o Project Files o Viewpoint Job Template Setup o Business License Requirements Upon assignment of project - schedule and attend pre-construction handoff meetings to receive project information. Review building plans and specifications, estimate, estimating proposals, and client contract. Analyze project risks Develop overall plan to complete contracted work in conjunction with Superintendent Gather and organize the following information for future use: o Contracted Scope of Work o Project Safety Concerns o Material Quantity Takeoffs o Design Deficiencies o Potential Design/Construction Changes o Potential Schedule and Cost Impacts Coordinate assembly of project budget derived from Estimate. Work with the Project Superintendent to prepare project schedule. Coordinate preparation of Site Specific Safety Plan Conduct project Kick Off meeting with WBC project team to discuss all Project needs. Coordinate material vendor selection and buyout process. Ensure that all required submittals are collected, reviewed for compliance with contract documents, and submitted to the client for review. Ensure that all building materials, equipment, and supplies are available to the WBC Superintendent for the project. Coordinate the provision of adequate craft-level employees necessary to complete the job effectively, efficiently, and safely. Ensure that the project layout process is planned and conducted properly. Coordinate project needs with Superintendent and field engineering staff Review all plan and scope of work changes and Facilitate the change order process. Work with Superintendent to ensure project milestones are met. Monitor quality control. Monitor construction progress and actual costs versus budget. Frequently review information with Superintendent. Monitor labor production rates for significant phase codes of work. In cooperation with Superintendent, continuously analyze, trouble shoot, and attempt to improve construction processes. Ensure that all work is performed in strict compliance with WBC Safety Manual, Site Specific Safety Plan, OSHA requirements, and Client requirements. Assist WBC Superintendent(s) with troubleshooting and solving any special problems as they arise on the job site. Review all material, service, and equipment invoices associated with assigned projects for correctness. Review project timesheets and production reports weekly or more often as needed to track project activity. Analyze actual job costs and estimate future cost. Complete revenue projections. Analyze percentage of work complete on each assigned project and prepare Progress Invoice to the client for each billing period. Attend Project Coordination meetings for each assigned project. Participate as project team member to assist in coordinating, scheduling work. Represent Wayne Brothers Inc.'s interest and the interests of the project team. Coordinate successful closure of assigned projects. For major projects, conduct Post Project Review Meeting Attend weekly internal Operations Team meeting and Participate as a team player. Support continuing education and internal training opportunities for employees Assist Business Development Assist Estimating Assist with Strategic Planning Assist Executive Management Team with any assignments Function as Mentor for WBC team. Cultivate a positive working relationship between WBC, Clients, Subcontractors, and Vendors. Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident- free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience Minimal 2-year Associate degree in Mechanical Engineering Technology or other related field 4-year Bachelor's Degree - preferred Minimum 5 years related experience - Required Knowledge, Skills and Abilities Required Planning Organizing Coordinating Analyzing and interpreting Data Problem Solving Negotiating Writing, speaking, listening Motivating Work effectively under pressure Analyze situations objectively Cultivate and nurture positive relationships with employees, vendors, and clients Effective at dealing with difficult people and situations Utilitarian Able to forecast future costs with reasonable accuracy Good math/geometry/trigonometry skills Proficient at adding/subtracting/calculating measurements, areas, and volumes Certificates, Licenses, Registrations • Valid Driver's License - Required • OSHA 10-Hour Certification - Required; training provided by Wayne Brothers Physical Demands Sitting for Long Periods of Time including at desk, at plan table, and in vehicle Climbing Ladders or working at heights or in confined spaces occasionally Wearing fall protection occasionally Driving for an extended period of time (1-8 hours) Work extended or occasionally odd hours Walking across uneven terrain and over surfaces under construction frequently Typing frequently Talking on telephone frequently Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI4e8d1d833ff6-1253

Position Title: Project Manager - Industrial Group Date Posted: 09/26/2025 Location: Eagleville, TN Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY The Project Manager must work safely and productively on various sized Industrial project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Project Manager position. All employees are expected to communicate, always build relationships with other team members, and use good judgment. The Project Manager is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Procure Industrial work through Business Development in TN Region Inform construction administration of project management assignment. Ensure procurement and/or completion of the following: Required Bonding Required Insurance Project Directions (Map) Project Files Viewpoint Job Template Setup Business License Requirements Upon assignment of project - schedule and attend pre-construction handoff meeting to receive project information. This meeting will be the conduit for all information realized during the bidding and project procurement phase to be delivered from pre-construction to operations. Review building plans and specifications, estimate, estimating proposals, and client contract. Analyze project risks Develop overall plan to complete contracted work in conjunction with Superintendent Gather and organize the following information for future use: Contracted Scope of Work Project Safety Concerns Material Quantity Takeoffs Design Deficiencies Potential Design/Construction Changes Potential Schedule and Cost Impacts Coordinate assembly of project budget derived from Estimate. Budget should be complete with cost, man-hours, and accurate units of measure. Budget should be broken down into applicable phase codes and cost types utilizing most recent global list. Work with the Project Superintendent to prepare project schedule (when project is of significant size and complexity) considering production rates, crew sizes needed, activities, sequences and durations, critical dates for subcontractors and suppliers, and milestone dates. Note: Project Schedule can be of critical path type, spreadsheet, hand-written, or other depending on our internal needs as well as the clients. Coordinate preparation of Site Specific Safety Plan including safety requirements, risk analysis at the job task level, safety officer inspection needs, site security, locks; specific training needed for formwork, fall protection, rigging, equipment operation, MSDS notebook, etc. Conduct project Kick Off meeting with WBC project team to discuss the following: Contract Documents Current Scope of Work Current Estimate Current Schedule with Milestones Client Relations Manpower Requirements Equipment Requirements Production Goals for all major work items Material Vendors and Budgeted Quantities Subcontractors Submittal Requirements Safety Analysis of Project Client Goals and Special Concerns Establish Project Organizational Chart and assign responsibilities. Coordinate material vendor selection and buyout process. This will include determination of best value among reputable vendors for items including, but not limited to: valves, pumps, tubing, insulation, hangers, fittings, accessories, equipment piping, etc. Ensure that all required submittals are collected, reviewed for compliance with contract documents, and submitted to the client for review. Date of submission shall allow adequate time for client and designer review, return to vendor, fabrication (if applicable) and delivery that will support scheduled construction activity on the job. Ensure that all building materials, equipment, and supplies are available to the WBC Superintendent for the project. Coordinate the provision of adequate craft-level employees necessary to complete the job effectively, efficiently, and safely. Communicate personnel needs through Human Resource Department. Assist when needed to acquire personnel that will meet the requirements of the project. Ensure that the project layout process is planned and conducted properly. Coordinate project needs with Superintendent and field engineering staff. Note: Execution of layout should utilize company resources in most efficient manner to accomplish needs of the project. Review all plan and scope of work changes. Facilitate the change order process including the following: Coordination of the estimating effort required Procure material and subcontractor pricing Scribe and deliver Change Order Proposal to client as required by contract Any required negotiation of change order scope and pricing with client Upon change order approval, coordinate entry of change order into Viewpoint including changes to budgeted cost, revenue, man hours, units, purchase orders, subcontracts, etc. Work with Superintendent to ensure project milestones are met. Monitor quality control to ensure that all building specifications are met. Monitor construction progress and actual costs versus budget. Frequently review information with Superintendent. Monitor labor production rates for significant phase codes of work. In cooperation with Superintendent, continuously analyze, trouble shoot, and attempt to improve construction processes. The intent shall be to take every opportunity to increase efficiency and/or improve quality of the work without increasing cost. Ensure that all work is performed in strict compliance with WBC Safety Manual, Site Specific Safety Plan, OSHA requirements, and Client requirements. Assist WBC Superintendent(s) with troubleshooting and solving any special problems as they arise on the job site in order to: (a) keep employees safe, (b) ensure the work activities remain on schedule and (c) that we "Safely Exceed the Expectations" of the client. Review all material, service, and equipment invoices associated with assigned projects for correctness. Assign correct phase code and cost type in Viewpoint AP Invoice Review module. Approve or place on hold appropriately to control payment release. Review project timesheets and production reports weekly or more often as needed to track project activity. Analyze actual job costs and estimate future cost required to complete contracted work on a monthly basis for each assigned project. Work will be performed and interfaced in "JC Projections." Complete revenue projections for any work not currently incorporated into the Contract, but for which cost has been projected. The work will be performed in "JC Revenue Projections." Analyze percentage of work complete on each assigned project and prepare Progress Invoice to the client for each billing period. The work is typically performed in spreadsheet format as well as in JB Progress Billing in Viewpoint. Attend Project Coordination meetings for each assigned project. Participate as project team member to assist in coordinating, scheduling work. Represent Wayne Brothers Inc.'s interest and the interests of the project team. Coordinate successful closure of assigned projects. This will include closeout of all change orders, submission of punch list, completion of punch list, submission of all closeout documentation as required by contract, and collection of Client Satisfaction Survey. For major projects, conduct Post Project Review Meeting Attend weekly internal Operations Team meeting. List manpower availability and needs for each project. Discuss other operational needs, safety issues, etc. Participate as a team player. Support continuing education and internal training opportunities for employees working on assigned projects Participate in EPMS system including completion of Team Member Appraisal Instrument for fellow employees when requested. Assist Business Development as needed. Assist Estimating as needed Assist with Strategic Planning as assigned. Represent WBC in any litigation as required. Assist Executive Management Team with any assignments Function as Mentor and WBC systems and operations trainer for any junior Project Managers, Project Engineers, Superintendents, and Foremen. Cultivate a positive working relationship between WBC, Clients, Subcontractors, and Vendors. Recognize competent subordinates worthy of promotion and be abreast of position vacancies to ensure staff progression. Coordinate, manage, and communicate with all subcontractors and effectively deal with any disputes. Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident- free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience 4-year Bachelor's Degree - preferred Minimum 5 -10 years related experience - Required . click apply for full job details

Trainer/Course Development (Technical/Semiconductor) US-CA-San Jose Job ID: 33547 Type: Full-Time # of Openings: 1 Category: Education/Training CUSA San Jose Branch About the Role Based in our San Jose office, you will develop and deliver training on industrial products (photolithography equipment). Not only will you prepare lesson plans, but also partner with customers and internal members to implement training as well as maintain equipment in the cleanrooms and training facilities to ensure equipment availability for training and demonstrations. This is an exciting opportunity to combine your technical expertise with your course development and training skills. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Conduct user training on Photolithography products both in-house and at customer sitesProvide classroom and laboratory training for internal and external customer training courses that includes but not limited to operation, preventive maintenance, application, and installation aspects of Canon photolithography equipmentDevelop new internal and external technical materialsRevise existing internal and external technical materials to ensure technical materials are current and accurateVerify accuracy of technical procedures to support field service technicians and customer needsProvide detailed presentations on technical topicsResponsible for operation, and maintenance of the training facilities and training equipment and preparation of the instructional site in the San Jose facility Participate in discussion groups as needed, to share technical information and improve technical knowledge of less experienced colleaguesContact customers to discuss training needs and acquire feedback from customers on current training programs and systems About You: The Skills & Expertise You Bring Requires a Bachelor's degree in a relevant technical field or equivalent experience and 3-5 years of related work experienceSemiconductor equipment, maintenance knowledge preferred, photolithography equipment knowledge helpfulPrior experience as a technical trainer preferredMay require up to 50% travel within the US (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policiesAbility to work flexible shiftsProficiency with Word, Excel, and PowerPointPhysical Demands & Work Environment The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working in office environment and also in cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) In accordance with applicable law, we are providing the anticipated base salary for this role $70,310- $103,770 Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI62773b5d9c9b-6059