22 jobs found

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Are you a compassionate and dedicated individual looking for a fulfilling career opportunity? Look no further! We are currently seeking a dynamic individual to join our team and make a positive impact on the lives of our patient population at our clinic in Anchorage, AK. Key Responsibilities: Perform and/or oversee repair and maintenance activities on water treatment equipment, dialysis equipment, ancillary equipment, test equipment, and the physical plant for assigned areas/facilities as recommended by the manufacturer and in compliance with FMCNA Clinical/Technical Services policies and procedures, industry standards and local, state and federal regulatory requirements. Document all repairs and maintenance activity/repairs per applicable policies and/or procedures. Employee is required to work on high voltage equipment. Purchase and maintain inventory of service parts. Ensure defective parts with associated RGA and warranty parts are returned in a timely manner. Actively support and participate in the Quality Assessment and Process Improvement (QAPI) process. Work with facility staff to ensure all regulatory and OSHA requirements are met. Perform water/dialysate sample collection and processing per applicable policies and procedures. Review, evaluate and report water/dialysate quality results per applicable policies and procedures. Transport equipment and supplies as needed. Perform other duties as assigned. Please note that this is not an all-inclusive list of the responsibilities of the position. Qualifications/Requirements: High school diploma or G.E.D. required. AA Degree in electronics, biomedical technology, or equivalent preferred. Previous dialysis, hospital, or medical experience preferred. Confirmation of ability to distinguish all primary colors. All attained certifications must be maintained and current. Attend all technical training programs required by state/federal regulations and USRC policy. Valid Driver's License Ability to work independently and a flexible schedule including nights, weekends and holidays. Demonstrated working knowledge of the English language and ability to communicate verbally and in writing. What we can offer: Competitive compensation plans. Competitive medical, dental, and vision plans, generous paid-time off and a 401k Retirement Plan with a company match Excellent work/life balance schedules. Ongoing training and development opportunities available at every clinic. Opportunities for advancement Physical Job Requirements: Frequent long periods of standing, bending, stooping, walking, sitting The use of dollies or other equipment is mandatory when moving heavy weight items. The ability to lift up to 50 lbs. as high as 5 feet. Reasonable accommodations may be made for individuals with disabilities Ability to travel to other clinics as needed. Overnight travel may be required. There is potential exposure to chemicals and infectious materials. Personal Protective Equipment (PPE) is provided by the company. Join us in our commitment to providing quality patient care and fostering a positive environment for both our patients and our dedicated staff. If you're ready to contribute to a healthcare team that values excellence, apply today and embark on a rewarding journey with us! Liberty Administrative Services, LLC provides an inclusive and safe environment for all applicants and employees. Liberty Administrative Services, LLC treats all individuals equally without regard to race, color, religion, sex (gender identity, gender expression, transgender), sexual orientation, age, pregnancy, parenthood, marital status, national origin or ancestry, citizenship status, disability, military status, genetic predisposition or carrier status or any other impermissible factor according to applicable law. For applicants in need of assistance or special accommodations for any part of the application process because of a medical condition or disability, please send an email to to let us know the nature of your request. PIa90f532e5d0b-7630

Are you a compassionate and dedicated individual looking for a fulfilling career opportunity? Look no further! We are currently seeking a dynamic individual to join our team and make a positive impact on the lives of our patient population at our clinic in Anchorage, AK. Key Responsibilities: Perform and/or oversee repair and maintenance activities on water treatment equipment, dialysis equipment, ancillary equipment, test equipment, and the physical plant for assigned areas/facilities as recommended by the manufacturer and in compliance with FMCNA Clinical/Technical Services policies and procedures, industry standards and local, state and federal regulatory requirements. Document all repairs and maintenance activity/repairs per applicable policies and/or procedures. Employee is required to work on high voltage equipment. Purchase and maintain inventory of service parts. Ensure defective parts with associated RGA and warranty parts are returned in a timely manner. Actively support and participate in the Quality Assessment and Process Improvement (QAPI) process. Work with facility staff to ensure all regulatory and OSHA requirements are met. Perform water/dialysate sample collection and processing per applicable policies and procedures. Review, evaluate and report water/dialysate quality results per applicable policies and procedures. Transport equipment and supplies as needed. Perform other duties as assigned. Please note that this is not an all-inclusive list of the responsibilities of the position. Qualifications/Requirements: High school diploma or G.E.D. required. AA Degree in electronics, biomedical technology, or equivalent preferred. Previous dialysis, hospital, or medical experience preferred. Confirmation of ability to distinguish all primary colors. All attained certifications must be maintained and current. Attend all technical training programs required by state/federal regulations and USRC policy. Valid Driver's License Ability to work independently and a flexible schedule including nights, weekends and holidays. Demonstrated working knowledge of the English language and ability to communicate verbally and in writing. What we can offer: Competitive compensation plans. Competitive medical, dental, and vision plans, generous paid-time off and a 401k Retirement Plan with a company match Excellent work/life balance schedules. Ongoing training and development opportunities available at every clinic. Opportunities for advancement Physical Job Requirements: Frequent long periods of standing, bending, stooping, walking, sitting The use of dollies or other equipment is mandatory when moving heavy weight items. The ability to lift up to 50 lbs. as high as 5 feet. Reasonable accommodations may be made for individuals with disabilities Ability to travel to other clinics as needed. Overnight travel may be required. There is potential exposure to chemicals and infectious materials. Personal Protective Equipment (PPE) is provided by the company. Join us in our commitment to providing quality patient care and fostering a positive environment for both our patients and our dedicated staff. If you're ready to contribute to a healthcare team that values excellence, apply today and embark on a rewarding journey with us! Liberty Administrative Services, LLC provides an inclusive and safe environment for all applicants and employees. Liberty Administrative Services, LLC treats all individuals equally without regard to race, color, religion, sex (gender identity, gender expression, transgender), sexual orientation, age, pregnancy, parenthood, marital status, national origin or ancestry, citizenship status, disability, military status, genetic predisposition or carrier status or any other impermissible factor according to applicable law. For applicants in need of assistance or special accommodations for any part of the application process because of a medical condition or disability, please send an email to to let us know the nature of your request. PIa90f532e5d0b-7630