Mechanic III diagnoses vehicle malfunctions, performs preventive maintenance and repairs various types of transit and support vehicles, either in the field or at the Operations garage. Mechanic III duties also include general vehicle repair, skilled in some aspects of paint and body repair, basic electric/electronic diagnosis and repair. This position requires supervision. Mechanic III reports to the Maintenance Supervisor on duty. Essential Job Functions: (Duties listed are neither intended to be all inclusive nor to limit duties that might reasonably be assigned.) Technical/Mechanical: Maintain proficiency in the diagnosis and repair of all HRT vehicles. Maintain proficiency in the removal and replacement of some components on HRT vehicles. Ensure accurate diagnosis skills and effective repair and/or replacement of component techniques necessary for the proper functioning of assigned equipment. Effectively and efficiency perform preventive maintenance inspections. Ensure the timely and effective repair of any problems identified during preventive maintenance inspections. Work to develop skill in: Performing all levels of preventive maintenance. Repairing and inspecting wheelchair lifts, ramps and restraints. Repairing and adjusting torsion arms, air bags, and all other components of suspension system. Testing, repairing and/or replacing components of electrical and lighting systems. Replacing bolted and bonded body components including but not limited to glazing, mirrors, panels, stanchions and passenger seats. Properly mixing and applying body filler. Repairing and overhauling brake systems. Perform road service calls for vehicle failures. Road testing vehicles to ensure safety and quality of work performed. Perform the duties of Helper, Servicer and Cleaner as required. Advise supervisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time frame. Operate forktruck. Administrative/Teamwork: Interact effectively, courteously, and professionally with operations department employees and other HRT employees regarding vehicle repairs and other shop business. Assume primary responsibility of assigned projects. Perform all required written and/or automated work orders and other documentation as directed. Report equipment abuse or component tampering to the shop supervisor. Train other HRT employees in the safe and efficient performance of fleet maintenance and proper operation of required maintenance equipment/tooling. Involved in the daily operation of the shop. Possess the ability to interpret maintenance manuals, wiring diagrams and other documents and to safely operate all company equipment. OSHA/Safety/Environmental: Maintain a clean, safe work area in compliance with HRT/OSHA standards. Safely uses all power and hand held mechanic tools. Maintain awareness and compliance with all current HRT, local, state, and federal regulations, such as regulations governing the handling and disposal of hazardous waste and use of Personal Protective Equipment (PPE). Perform other maintenance duties or assignments as requested. Responsible for proper use of Personal Protective Equipment (PPE).HRT Environmental Management System (EMS): Responsible for maintaining a general awareness of HRT's EMS. Handle all related job responsibilities in accordance to HRT's Environmental Policy, relevant EMS Standard Operating Procedures, and Emergency Management Plan.Training and/or Education: High school diploma/GED required. Trade school preferred. Required Experience: Must have three (3) years heavy duty shop experience within the past five (5) years or an equivalent combination of education and experience. Mechanical experience will be given preference over general shop experience. Must have proficiency in the diagnosis and repair of all HRT vehicles and be able to read/comprehend written and electronic service information. Licenses or Certificates: Must have CDL Class B license and/or CDL Permit and the ability to acquire within sixty (60) days of employment a valid Virginia CDL Class B license with air brake and passenger endorsements. Special Requirements: Written and verbal communication and presentation skills. Must be able interpret and carry out verbal and written assignments. Ability to pass DOT physical examination. Ability to meet night vision requirements. Must pass HRT's written and technical skills assessment(s) prior to moving to the Mechanic III classification. Must meet ongoing educational, training and DOT requirements to retain employment in this position. Must be able to pass federal government background screening process for local military installation access. This position is classified as essential personnel and as Safety-Sensitive. FLSA Status Non Exempt Physical Demands: Must be able to lift eighty (80) lbs. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Unusual Demands: Must be able to work in all weather conditions and on all work shifts. Duties may require overtime as necessary to meet service demands. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work involves meeting multiple demands on a timely basis.
11/01/2025
Full time
Mechanic III diagnoses vehicle malfunctions, performs preventive maintenance and repairs various types of transit and support vehicles, either in the field or at the Operations garage. Mechanic III duties also include general vehicle repair, skilled in some aspects of paint and body repair, basic electric/electronic diagnosis and repair. This position requires supervision. Mechanic III reports to the Maintenance Supervisor on duty. Essential Job Functions: (Duties listed are neither intended to be all inclusive nor to limit duties that might reasonably be assigned.) Technical/Mechanical: Maintain proficiency in the diagnosis and repair of all HRT vehicles. Maintain proficiency in the removal and replacement of some components on HRT vehicles. Ensure accurate diagnosis skills and effective repair and/or replacement of component techniques necessary for the proper functioning of assigned equipment. Effectively and efficiency perform preventive maintenance inspections. Ensure the timely and effective repair of any problems identified during preventive maintenance inspections. Work to develop skill in: Performing all levels of preventive maintenance. Repairing and inspecting wheelchair lifts, ramps and restraints. Repairing and adjusting torsion arms, air bags, and all other components of suspension system. Testing, repairing and/or replacing components of electrical and lighting systems. Replacing bolted and bonded body components including but not limited to glazing, mirrors, panels, stanchions and passenger seats. Properly mixing and applying body filler. Repairing and overhauling brake systems. Perform road service calls for vehicle failures. Road testing vehicles to ensure safety and quality of work performed. Perform the duties of Helper, Servicer and Cleaner as required. Advise supervisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time frame. Operate forktruck. Administrative/Teamwork: Interact effectively, courteously, and professionally with operations department employees and other HRT employees regarding vehicle repairs and other shop business. Assume primary responsibility of assigned projects. Perform all required written and/or automated work orders and other documentation as directed. Report equipment abuse or component tampering to the shop supervisor. Train other HRT employees in the safe and efficient performance of fleet maintenance and proper operation of required maintenance equipment/tooling. Involved in the daily operation of the shop. Possess the ability to interpret maintenance manuals, wiring diagrams and other documents and to safely operate all company equipment. OSHA/Safety/Environmental: Maintain a clean, safe work area in compliance with HRT/OSHA standards. Safely uses all power and hand held mechanic tools. Maintain awareness and compliance with all current HRT, local, state, and federal regulations, such as regulations governing the handling and disposal of hazardous waste and use of Personal Protective Equipment (PPE). Perform other maintenance duties or assignments as requested. Responsible for proper use of Personal Protective Equipment (PPE).HRT Environmental Management System (EMS): Responsible for maintaining a general awareness of HRT's EMS. Handle all related job responsibilities in accordance to HRT's Environmental Policy, relevant EMS Standard Operating Procedures, and Emergency Management Plan.Training and/or Education: High school diploma/GED required. Trade school preferred. Required Experience: Must have three (3) years heavy duty shop experience within the past five (5) years or an equivalent combination of education and experience. Mechanical experience will be given preference over general shop experience. Must have proficiency in the diagnosis and repair of all HRT vehicles and be able to read/comprehend written and electronic service information. Licenses or Certificates: Must have CDL Class B license and/or CDL Permit and the ability to acquire within sixty (60) days of employment a valid Virginia CDL Class B license with air brake and passenger endorsements. Special Requirements: Written and verbal communication and presentation skills. Must be able interpret and carry out verbal and written assignments. Ability to pass DOT physical examination. Ability to meet night vision requirements. Must pass HRT's written and technical skills assessment(s) prior to moving to the Mechanic III classification. Must meet ongoing educational, training and DOT requirements to retain employment in this position. Must be able to pass federal government background screening process for local military installation access. This position is classified as essential personnel and as Safety-Sensitive. FLSA Status Non Exempt Physical Demands: Must be able to lift eighty (80) lbs. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Unusual Demands: Must be able to work in all weather conditions and on all work shifts. Duties may require overtime as necessary to meet service demands. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work involves meeting multiple demands on a timely basis.
Kauai Coffee, the largest coffee farm in the US, is seeking to fill the role of Mechanical Equipment Shop Supervisor. Incumbent supervises and oversees the operations of the Mechanical Equipment Shop to achieve Company operational objectives. Primary Functions: Develops, organizes, coordinates, plans and implements procedures and practices for all mobile equipment maintenance and repairs Directs and coordinates the activities of subordinates to achieve company/department goals. Schedules and assigns work on equipment. Works closely with all departments to optimize production and maintenance schedules to ensure highest level of overall performance, reliability and workforce productivity. Responsible for archiving all equipment data including nameplate information, repair history and mechanical safety device testing. Implements corrective, predictive and preventative maintenance programs to ensure the highest level of equipment availability. Responsible for preparing and adhering to annual operating and capital budgets. Orders and purchases parts, equipment and supplies and processes invoices. Knowledgeable of and complies with all Federal, State, Local, and Company safety, health, and environmental regulations. Provides a safe working environment for all employees to minimize accidents and their related costs. Responsible for compliance with company rules and policies and with the Company/Union Agreement to ensure fair and equitable treatment of all employees. Assists in building a healthy, team-oriented work environment to insure continued success of Kauai Coffee Company, LLC. Additional duties as assigned. Qualifications/Skills/Knowledge Requirements: At least 5 years experience as certified ICE Mechanic and mobile equipment service and maintenance. College degree in automotive engineering or related field preferred. Must possess good administrative, personnel and overall communication skills. Expertise in the following areas: Gasoline engines, Diesel engines, Hydraulics, Electronics/electrical, PM/Work Order programs and the ordering and purchasing of parts. Ability to prioritize work to meet deadlines.
11/01/2025
Full time
Kauai Coffee, the largest coffee farm in the US, is seeking to fill the role of Mechanical Equipment Shop Supervisor. Incumbent supervises and oversees the operations of the Mechanical Equipment Shop to achieve Company operational objectives. Primary Functions: Develops, organizes, coordinates, plans and implements procedures and practices for all mobile equipment maintenance and repairs Directs and coordinates the activities of subordinates to achieve company/department goals. Schedules and assigns work on equipment. Works closely with all departments to optimize production and maintenance schedules to ensure highest level of overall performance, reliability and workforce productivity. Responsible for archiving all equipment data including nameplate information, repair history and mechanical safety device testing. Implements corrective, predictive and preventative maintenance programs to ensure the highest level of equipment availability. Responsible for preparing and adhering to annual operating and capital budgets. Orders and purchases parts, equipment and supplies and processes invoices. Knowledgeable of and complies with all Federal, State, Local, and Company safety, health, and environmental regulations. Provides a safe working environment for all employees to minimize accidents and their related costs. Responsible for compliance with company rules and policies and with the Company/Union Agreement to ensure fair and equitable treatment of all employees. Assists in building a healthy, team-oriented work environment to insure continued success of Kauai Coffee Company, LLC. Additional duties as assigned. Qualifications/Skills/Knowledge Requirements: At least 5 years experience as certified ICE Mechanic and mobile equipment service and maintenance. College degree in automotive engineering or related field preferred. Must possess good administrative, personnel and overall communication skills. Expertise in the following areas: Gasoline engines, Diesel engines, Hydraulics, Electronics/electrical, PM/Work Order programs and the ordering and purchasing of parts. Ability to prioritize work to meet deadlines.
Overview: Immediate opening for Jr. Automotive Technicians/Mechanics T.O. Haas Tire serves the community! We have been in business since 1947, T.O. Haas Tire has 24 locations across Nebraska, Kansas and Iowa and we're growing fast! We sell many tire brands for cars, pickups, SUVs, tractors, trailers, ATVs, pivot irrigation systems, and more. In addition to tires, wheels, and batteries, T.O. Haas Tire & Auto performs many automotive services including oil changes, alignments, brakes, exhaust, shocks, struts, cooling systems, transmission fluid flush, and more. We employ ASE Certified Technicians to keep your vehicle riding and running at its best. The Junior Automotive Technician is responsible for conducting basic automotive diagnostic and repair such as oil changes, tire and wheel related services and light vehicle maintenance. Pay: $40,000 to $60,000/Yr. Benefits: Closed Sunday Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement Principal Duties and Responsibilities : Performs basic mechanical repairs based on level of experience Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes, fluid changes and power flushes and other basic services. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Previous automotive technician / mechanic experience preferred Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license Must be at least 18 years old Ability to obtain a State Inspector License (in applicable locations) is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The Junior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions . The Junior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
10/31/2025
Full time
Overview: Immediate opening for Jr. Automotive Technicians/Mechanics T.O. Haas Tire serves the community! We have been in business since 1947, T.O. Haas Tire has 24 locations across Nebraska, Kansas and Iowa and we're growing fast! We sell many tire brands for cars, pickups, SUVs, tractors, trailers, ATVs, pivot irrigation systems, and more. In addition to tires, wheels, and batteries, T.O. Haas Tire & Auto performs many automotive services including oil changes, alignments, brakes, exhaust, shocks, struts, cooling systems, transmission fluid flush, and more. We employ ASE Certified Technicians to keep your vehicle riding and running at its best. The Junior Automotive Technician is responsible for conducting basic automotive diagnostic and repair such as oil changes, tire and wheel related services and light vehicle maintenance. Pay: $40,000 to $60,000/Yr. Benefits: Closed Sunday Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement Principal Duties and Responsibilities : Performs basic mechanical repairs based on level of experience Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes, fluid changes and power flushes and other basic services. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Previous automotive technician / mechanic experience preferred Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license Must be at least 18 years old Ability to obtain a State Inspector License (in applicable locations) is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The Junior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions . The Junior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Maintenance Technician Salary Range - $23 - $30 per hour plus applicable shift pay Every professional wants to work for an industry leader. Now is your chance as Hearth & Home Technologies is hiring a Maintenance Technician in Randolph, VT. A career at Hearth & Home Technologies puts you in the position of working with the most popular brands in the industry, such as the iconic Vermont Castings brand, and having an impact on a product that people love. The hearth is the center of the home and family life. The team you work with will be highly skilled and trained. The products and company you represent are best-in-class. Candidates will assist all members with repairs or modifications to plant equipment or facilities according to requirements prioritized by the Maintenance Lead / Supervisor. Responsible for completing preventative maintenance routines; taking corrective action as needed. Excellent mechanical aptitude and ability to analyze, evaluate and solve mechanical problems. General background in repair and maintenance. Welding and fabrication skills; operation of machine shop equipment and various measuring devices such as calipers and dial indicators. Ability to communicate and work well with all levels of members within the facility both individually and in a team environment. Ability to interface with line operators to assist with repairs and troubleshooting. Ability to work beneath machines and in close quarters while performing analysis and repair work. Ensure a safe workplace for all members. Benefits of Working for HHT: This rewarding career includes competitive compensation, comprehensive benefits and a supportive environment focused on developing your skills and advancing your career. Benefits that start Day 1 Health Care: full medical, dental and vision Three Weeks Paid Time Off 10 Company Paid Holidays 401k and Company Match Profit Sharing - Eligible after one year of service Other Dynamic Perks: Work Today Get Paid Today: Access your compensation when you need it. You are more than a number; you are a member and a significant part of the organization. Hearth & Home Technologies is an operating division of HNI Corporation (NYSE: HNI). We design, manufacture and distribute a wide variety of gas, electric, wood and biomass burning fireplaces, inserts, stoves and accessories. All in the USA. Lakeville, Minnesota is our home, but we have locations throughout the United States.
10/31/2025
Full time
Maintenance Technician Salary Range - $23 - $30 per hour plus applicable shift pay Every professional wants to work for an industry leader. Now is your chance as Hearth & Home Technologies is hiring a Maintenance Technician in Randolph, VT. A career at Hearth & Home Technologies puts you in the position of working with the most popular brands in the industry, such as the iconic Vermont Castings brand, and having an impact on a product that people love. The hearth is the center of the home and family life. The team you work with will be highly skilled and trained. The products and company you represent are best-in-class. Candidates will assist all members with repairs or modifications to plant equipment or facilities according to requirements prioritized by the Maintenance Lead / Supervisor. Responsible for completing preventative maintenance routines; taking corrective action as needed. Excellent mechanical aptitude and ability to analyze, evaluate and solve mechanical problems. General background in repair and maintenance. Welding and fabrication skills; operation of machine shop equipment and various measuring devices such as calipers and dial indicators. Ability to communicate and work well with all levels of members within the facility both individually and in a team environment. Ability to interface with line operators to assist with repairs and troubleshooting. Ability to work beneath machines and in close quarters while performing analysis and repair work. Ensure a safe workplace for all members. Benefits of Working for HHT: This rewarding career includes competitive compensation, comprehensive benefits and a supportive environment focused on developing your skills and advancing your career. Benefits that start Day 1 Health Care: full medical, dental and vision Three Weeks Paid Time Off 10 Company Paid Holidays 401k and Company Match Profit Sharing - Eligible after one year of service Other Dynamic Perks: Work Today Get Paid Today: Access your compensation when you need it. You are more than a number; you are a member and a significant part of the organization. Hearth & Home Technologies is an operating division of HNI Corporation (NYSE: HNI). We design, manufacture and distribute a wide variety of gas, electric, wood and biomass burning fireplaces, inserts, stoves and accessories. All in the USA. Lakeville, Minnesota is our home, but we have locations throughout the United States.
JOB FUNCTION: As a Fleet Maintenance Technician you will repair and maintain fleet equipment and assist with snow removal. RESPONSIBILITIES: Maintain work area cleanliness and safety Perform all levels of preventive maintenance and services on fleet and campus equipment Complete repair orders accurately and legibly with all necessary information Repair and troubleshoot major components such as engine, transmissions and differentials, to include replacing complete assemblies, fuel system components etc. Utilize OEM Software to preform diagnostic solutions of fleet vehicles Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications Road test vehicles when necessary to diagnose malfunctions or to ensure that they are working properly Assign priority and process vehicle repair work orders Provide accurate documentation and filing Work safely, effectively, and cooperatively with team members, supervisors, drivers, dispatchers, and outside services Assist snow removal team at the wholesale complex Other duties as assigned BASIC QUALIFICATIONS: Must be at least 18 years old or older High school diploma or equivalent Valid driver's license with ability to obtain Class A CDL Thermo King / Carrier repair experience Diesel and heavy equipment / trailer mechanic skills Basic computer skills (diagnostic and administrative) PHYSICAL DEMANDS: Mechanic work on, under, or in vehicles for 6+ hours a day Computer keyboard work sitting for up to 2 hours at a time Occasional walking, crawling and climbing Often preforming lifting, pushing, and pulling activities TYPICAL EQUIPMENT USED: A variety of tools and equipment are used for class 8 heavy duty vehicle repairs, hand tools, computer diagnostics, tire machines, etc. Equipment- Detroit, Volvo, Cummins, Thermo King, Carrier, etc. WORK ENVIRONMENT: Exposure to varying temperatures Exposure to moving mechanical parts, vehicles, oils, gases, and fumes Occasionally exposed to extreme cold and hot temperatures Occasional moderate to loud truck shop noise BENEFITS: Paid Holidays Paid Time Off Paid Parental Leave Flexible Scheduling Employee Discount Weekly Pay On-the-job, paid training Comprehensive Medical/Rx Health Savings Account Flex Spending Account - Medical Dental and Vision Insurance Company Paid Short Term Disability and Basic Life Insurance/AD&D Supplemental Life Insurance Long Term Disability Critical Illness Insurance Accident Insurance 401(l) Retirement Planning (With company match) Dependent Care Reimbursement Account Student Loan Paydown Program For more information, please call Bret Grimes at (515)- or Blake Linsenmeyer at (515)-. EOE Required Preferred Job Industries Retail
10/31/2025
Full time
JOB FUNCTION: As a Fleet Maintenance Technician you will repair and maintain fleet equipment and assist with snow removal. RESPONSIBILITIES: Maintain work area cleanliness and safety Perform all levels of preventive maintenance and services on fleet and campus equipment Complete repair orders accurately and legibly with all necessary information Repair and troubleshoot major components such as engine, transmissions and differentials, to include replacing complete assemblies, fuel system components etc. Utilize OEM Software to preform diagnostic solutions of fleet vehicles Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications Road test vehicles when necessary to diagnose malfunctions or to ensure that they are working properly Assign priority and process vehicle repair work orders Provide accurate documentation and filing Work safely, effectively, and cooperatively with team members, supervisors, drivers, dispatchers, and outside services Assist snow removal team at the wholesale complex Other duties as assigned BASIC QUALIFICATIONS: Must be at least 18 years old or older High school diploma or equivalent Valid driver's license with ability to obtain Class A CDL Thermo King / Carrier repair experience Diesel and heavy equipment / trailer mechanic skills Basic computer skills (diagnostic and administrative) PHYSICAL DEMANDS: Mechanic work on, under, or in vehicles for 6+ hours a day Computer keyboard work sitting for up to 2 hours at a time Occasional walking, crawling and climbing Often preforming lifting, pushing, and pulling activities TYPICAL EQUIPMENT USED: A variety of tools and equipment are used for class 8 heavy duty vehicle repairs, hand tools, computer diagnostics, tire machines, etc. Equipment- Detroit, Volvo, Cummins, Thermo King, Carrier, etc. WORK ENVIRONMENT: Exposure to varying temperatures Exposure to moving mechanical parts, vehicles, oils, gases, and fumes Occasionally exposed to extreme cold and hot temperatures Occasional moderate to loud truck shop noise BENEFITS: Paid Holidays Paid Time Off Paid Parental Leave Flexible Scheduling Employee Discount Weekly Pay On-the-job, paid training Comprehensive Medical/Rx Health Savings Account Flex Spending Account - Medical Dental and Vision Insurance Company Paid Short Term Disability and Basic Life Insurance/AD&D Supplemental Life Insurance Long Term Disability Critical Illness Insurance Accident Insurance 401(l) Retirement Planning (With company match) Dependent Care Reimbursement Account Student Loan Paydown Program For more information, please call Bret Grimes at (515)- or Blake Linsenmeyer at (515)-. EOE Required Preferred Job Industries Retail
Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewarding career, we invite you to review our opportunities! Job Description Summary Shop Foreman Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop a career track • Leverage your current skills while developing new skills • Work with an incredible team of people Sunbelt Rentals the fastest growing rental business in North America is seeking a Shop Foreman. As a Shop Foreman, you will supervise employees engaged in repairing and maintaining rental equipment. Assists in coordinating and directing the workload of the Service Department for maximum efficiency and productivity while providing quality repair work. Advises and recommends technician skills and training needs. Consistently exhibits Sunbelt Rental's core values. DUTIES & RESPONSIBILITIES • Instruct, assist and train service technicians in best practices of equipment repair and safety • Perform inspections of completed repairs to ensure thorough and quality of work performed • Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes • Work in cooperation with other areas to provide quality, seamless customer service • Directs service technicians and yard staff in daily operations • Schedules service and maintenance of equipment in the workshop and/or customer job site; including coordinating response to breakdowns with road technicians • Monitors all equipment, ensuring that all repairs have been properly designated to the account of a customer, supplier or the profit center • Assists Profit Center Manager in training employees, planning, assigning, and directing work; addressing complaints and resolving conflicts • Other duties assigned by manager QUALIFICATIONS • Trade school or college degree (bachelor or associates) preferred • Valid Driver's license • Previous supervisory experience • 5+ years of mechanical experience within Rental Industry or similar industry • Proven customer relations and communications skills • Basic computer understanding to enter data or information into a terminal or PC • Methods, materials and tools required to repair and maintain rental equipment • Proven safety record The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Base Pay Range: $26.54 - 36.48Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.
10/08/2025
Full time
Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewarding career, we invite you to review our opportunities! Job Description Summary Shop Foreman Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop a career track • Leverage your current skills while developing new skills • Work with an incredible team of people Sunbelt Rentals the fastest growing rental business in North America is seeking a Shop Foreman. As a Shop Foreman, you will supervise employees engaged in repairing and maintaining rental equipment. Assists in coordinating and directing the workload of the Service Department for maximum efficiency and productivity while providing quality repair work. Advises and recommends technician skills and training needs. Consistently exhibits Sunbelt Rental's core values. DUTIES & RESPONSIBILITIES • Instruct, assist and train service technicians in best practices of equipment repair and safety • Perform inspections of completed repairs to ensure thorough and quality of work performed • Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes • Work in cooperation with other areas to provide quality, seamless customer service • Directs service technicians and yard staff in daily operations • Schedules service and maintenance of equipment in the workshop and/or customer job site; including coordinating response to breakdowns with road technicians • Monitors all equipment, ensuring that all repairs have been properly designated to the account of a customer, supplier or the profit center • Assists Profit Center Manager in training employees, planning, assigning, and directing work; addressing complaints and resolving conflicts • Other duties assigned by manager QUALIFICATIONS • Trade school or college degree (bachelor or associates) preferred • Valid Driver's license • Previous supervisory experience • 5+ years of mechanical experience within Rental Industry or similar industry • Proven customer relations and communications skills • Basic computer understanding to enter data or information into a terminal or PC • Methods, materials and tools required to repair and maintain rental equipment • Proven safety record The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Base Pay Range: $26.54 - 36.48Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.
Penske Truck Leasing Co., L.P.
Harrisonburg, Virginia
3430 S Main St Harrisonburg VA 22801 United States What's the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipment-not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs-like replacing or rotating tires-and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske's Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver's license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 3430 S Main St Primary Location: US-VA-Harrisonburg Employer: Penske Truck Leasing Co., L.P. Req ID:
10/08/2025
Full time
3430 S Main St Harrisonburg VA 22801 United States What's the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipment-not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs-like replacing or rotating tires-and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske's Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver's license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 3430 S Main St Primary Location: US-VA-Harrisonburg Employer: Penske Truck Leasing Co., L.P. Req ID:
Position Description Job Summary: The Foreman is responsible for coordinating, scheduling, and overseeing craft employee activities across one or more job sites. This role ensures productivity, compliance with safety standards, and alignment with project timelines and specifications. Duties and Responsibilities: Plan and supervise field operations, including construction methods, manpower needs, material and equipment requirements, temporary power setup, and shift scheduling. Coordinate activities across trades, company departments, and other contractors. Collaborate with estimating and planning teams to ensure compliance with job specifications and timelines. Identify and resolve site challenges such as low productivity, scheduling conflicts, or equipment issues. Monitor and enforce safety compliance on job sites; document incidents and implement corrective measures. Perform daily observations (BOCs) and productivity tracking. Provide regular reporting on work progress and crew performance. Administer and support preventive maintenance and repair programs for construction equipment. Troubleshoot, diagnose, and coordinate repair of diesel and gas-powered equipment (service truck provided). Perform welding and fabrication as needed (MIG, TIG, ARC). Maintain accurate maintenance records, equipment logs, and inventory levels. Liaise with specialty shops and vendors for external repair support. Provide support and mentorship to craft employees; identify and recommend corrective actions or recognition. Position Requirements Required Skills and Abilities: Proven experience supervising field crews in a construction environment. Strong understanding of scheduling, cost control, and productivity tracking. Mechanical aptitude and experience with construction equipment repair. Familiarity with Microsoft Office (Word, Excel, Outlook) and digital job tracking tools. Proficient in verbal and written business communication. Essential Core Competencies: Safety Focused: Leads by example in promoting and enforcing job site safety standards. Results Oriented: Drives performance, monitors goals, and ensures project deliverables are met. People Leadership: Supports team development through clear communication, accountability, and mentorship. Operational Efficiency: Plans ahead, allocates resources, and adjusts priorities to meet changing field demands. Education and Experience: Minimum 5 years of supervisory experience in construction or related trades. Technical expertise in construction methods, tools, and equipment. Demolition, heavy equipment, or Class A CDL experience is a plus. Physical and Additional Requirements: Must be able to lift and move 45 lbs or more. Must be able to work in physically demanding conditions. Willing to work in various weather conditions (hot, cold, rain). Must wear steel toe leather work boots. Position Instructions Penhall Company has been shaping the future of concrete services for over 65 years. As the nation's leader in concrete cutting, coring, scanning, and demolition, and ranked 3rd in Demolition by ENR's 2023 Top Specialty Contractors, we deliver more than just expertise-we deliver results. With safety at the core of our operations and state-of-the-art technology in our hands, we ensure every project is executed with precision, efficiency, and care. Equal Opportunity Information Legal Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Penhall Company is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a This job description is intended to describe the general nature and level of work being performed by employees in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required. Penhall Company reserves the right to modify, add, or remove duties and to assign other responsibilities as necessary.
10/07/2025
Full time
Position Description Job Summary: The Foreman is responsible for coordinating, scheduling, and overseeing craft employee activities across one or more job sites. This role ensures productivity, compliance with safety standards, and alignment with project timelines and specifications. Duties and Responsibilities: Plan and supervise field operations, including construction methods, manpower needs, material and equipment requirements, temporary power setup, and shift scheduling. Coordinate activities across trades, company departments, and other contractors. Collaborate with estimating and planning teams to ensure compliance with job specifications and timelines. Identify and resolve site challenges such as low productivity, scheduling conflicts, or equipment issues. Monitor and enforce safety compliance on job sites; document incidents and implement corrective measures. Perform daily observations (BOCs) and productivity tracking. Provide regular reporting on work progress and crew performance. Administer and support preventive maintenance and repair programs for construction equipment. Troubleshoot, diagnose, and coordinate repair of diesel and gas-powered equipment (service truck provided). Perform welding and fabrication as needed (MIG, TIG, ARC). Maintain accurate maintenance records, equipment logs, and inventory levels. Liaise with specialty shops and vendors for external repair support. Provide support and mentorship to craft employees; identify and recommend corrective actions or recognition. Position Requirements Required Skills and Abilities: Proven experience supervising field crews in a construction environment. Strong understanding of scheduling, cost control, and productivity tracking. Mechanical aptitude and experience with construction equipment repair. Familiarity with Microsoft Office (Word, Excel, Outlook) and digital job tracking tools. Proficient in verbal and written business communication. Essential Core Competencies: Safety Focused: Leads by example in promoting and enforcing job site safety standards. Results Oriented: Drives performance, monitors goals, and ensures project deliverables are met. People Leadership: Supports team development through clear communication, accountability, and mentorship. Operational Efficiency: Plans ahead, allocates resources, and adjusts priorities to meet changing field demands. Education and Experience: Minimum 5 years of supervisory experience in construction or related trades. Technical expertise in construction methods, tools, and equipment. Demolition, heavy equipment, or Class A CDL experience is a plus. Physical and Additional Requirements: Must be able to lift and move 45 lbs or more. Must be able to work in physically demanding conditions. Willing to work in various weather conditions (hot, cold, rain). Must wear steel toe leather work boots. Position Instructions Penhall Company has been shaping the future of concrete services for over 65 years. As the nation's leader in concrete cutting, coring, scanning, and demolition, and ranked 3rd in Demolition by ENR's 2023 Top Specialty Contractors, we deliver more than just expertise-we deliver results. With safety at the core of our operations and state-of-the-art technology in our hands, we ensure every project is executed with precision, efficiency, and care. Equal Opportunity Information Legal Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Penhall Company is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a This job description is intended to describe the general nature and level of work being performed by employees in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required. Penhall Company reserves the right to modify, add, or remove duties and to assign other responsibilities as necessary.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. We are a drug-free workplace and conduct drug testing. Nucor Rebar Fabrication is seeking applicants for our Maintenance Technician position supporting our location in Riverside, AL. We are North America's leading fabricator, installer and distributor of concrete reinforcing steel and related products. Teammates are the key to our success and every teammate can and does make a difference. We prioritize safety in everything we do. A career at Nucor Rebar Fabrication means stability, being heard and respected, and opportunity for personal and professional growth. Nucor, our parent company, is a Fortune 100 company recently named Fortune's best workplace in Manufacturing and Production. Nucor is committed to being good stewards of the environment and is constantly striving to find new and innovative ways to decrease our carbon footprint. Each branch of Nucor Rebar Fabrication works together as a team to be the best in the business. We're looking to add a hardworking teammate with integrity, problem-solving skills and who is not afraid of hard work. Benefits: Medical and dental are just the beginning. We value our teammates and offer a benefits package that also includes a bonus program, profit sharing, retirement savings, vacation and holiday pay, scholarship and tuition reimbursement, and unlimited growth potential. When you join Nucor Rebar Fabrication you are joining a fast-paced and stable work environment. For more information on our benefits go to Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Nucor - North America's largest steel and steel products producer Forge deep bonds with teammates; celebrate wins together; and always put safety first Shape your own future with the freedom to activate your ideas that propel us forward Get the foundation you need to create a stable and lifelong career All Nucor Teammates have the opportunity to receive a full benefits package, including: Medical/Dental/Vision insurances; Long-Term Disability Insurance; Life Insurance for you and your family; Vacation Days; Paid Holidays; 401K with Company Match; Nucor Profit Share Program; Nucor Stock Purchase Program; College Tuition Reimbursement program for you and your spouse; and a College Tuition Scholarship program for children of employees. Basic Job Functions: The role of the Maintenance Technician is to drive positive results in the Production Department to meet all NRF Division goals and continuously build a World-Class Rebar Fabrication facility to take care of Nucor's Customers. This will include, but is not limited to: Assist the safety team in the design, development and/or installation of machine guards and safety devices Perform routine maintenance to ensure safe and optimum functioning of equipment, systems, and processes Troubleshoot, repair, and modify equipment to maintain workplace safety and production efficiency Generat parts lists and labor time estimates for maintenance and repairs Advise Production Supervisor on machine purchasing and installation Train key shop teammates on new equipment and/or modifications to existing equipment Maintain repair records Other duties as assigned by Production Supervisor Minimum Qualifications: •Legally authorized to work in the United States without company sponsorship now or in the future. •Minimum two years' experience working on hydraulic, pneumatic and electrical maintenance and repairs •Ability to read and interpret schematic diagrams Preferred Qualifications: •2 or more years working experience in an industrial plant •2-year degree in mechanical/electrical or related field •AC & DC motor knowledge and experience •VFD knowledge and experience •Power transformer knowledge and experience •Programmable Logic Controller knowledge and experience •Formal electrical safety knowledge and experience •Experience in operation of forklift, mobile crane, and/or other mobile equipment Additionally: •Accountability - Displays responsibility with work habits and has ability to hold others accountable for desired results. •Initiative - Being proactive with seeking out work that needs to be done and being willing to take on responsibilities and challenges. •Teamwork - Encouraging and building mutual trust, respect, and cooperation among team members as well as effectively managing and resolving conflict as needed while working in a coordinated effort with others to achieve a common goal. •Problem Solving - Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions. •Maintenance Systems and Techniques - Knowledge of servicing, repairing, adjusting, and testing equipment, systems, and processes. Strong familiarity and comfort with electrical systems. •Attention to Detail - Thorough in accomplishing tasks, no matter how small they may be, and taking care to make sure that expectations are met. •Communication Skills - The ability to give full attention to what others are saying and communicating information so that others will understand. •Judgment/Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. We are a drug-free workplace and conduct drug testing. Nucor Rebar Fabrication is seeking applicants for our Maintenance Technician position supporting our location in Riverside, AL. We are North America's leading fabricator, installer and distributor of concrete reinforcing steel and related products. Teammates are the key to our success and every teammate can and does make a difference. We prioritize safety in everything we do. A career at Nucor Rebar Fabrication means stability, being heard and respected, and opportunity for personal and professional growth. Nucor, our parent company, is a Fortune 100 company recently named Fortune's best workplace in Manufacturing and Production. Nucor is committed to being good stewards of the environment and is constantly striving to find new and innovative ways to decrease our carbon footprint. Each branch of Nucor Rebar Fabrication works together as a team to be the best in the business. We're looking to add a hardworking teammate with integrity, problem-solving skills and who is not afraid of hard work. Benefits: Medical and dental are just the beginning. We value our teammates and offer a benefits package that also includes a bonus program, profit sharing, retirement savings, vacation and holiday pay, scholarship and tuition reimbursement, and unlimited growth potential. When you join Nucor Rebar Fabrication you are joining a fast-paced and stable work environment. For more information on our benefits go to .
10/07/2025
Full time
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. We are a drug-free workplace and conduct drug testing. Nucor Rebar Fabrication is seeking applicants for our Maintenance Technician position supporting our location in Riverside, AL. We are North America's leading fabricator, installer and distributor of concrete reinforcing steel and related products. Teammates are the key to our success and every teammate can and does make a difference. We prioritize safety in everything we do. A career at Nucor Rebar Fabrication means stability, being heard and respected, and opportunity for personal and professional growth. Nucor, our parent company, is a Fortune 100 company recently named Fortune's best workplace in Manufacturing and Production. Nucor is committed to being good stewards of the environment and is constantly striving to find new and innovative ways to decrease our carbon footprint. Each branch of Nucor Rebar Fabrication works together as a team to be the best in the business. We're looking to add a hardworking teammate with integrity, problem-solving skills and who is not afraid of hard work. Benefits: Medical and dental are just the beginning. We value our teammates and offer a benefits package that also includes a bonus program, profit sharing, retirement savings, vacation and holiday pay, scholarship and tuition reimbursement, and unlimited growth potential. When you join Nucor Rebar Fabrication you are joining a fast-paced and stable work environment. For more information on our benefits go to Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Nucor - North America's largest steel and steel products producer Forge deep bonds with teammates; celebrate wins together; and always put safety first Shape your own future with the freedom to activate your ideas that propel us forward Get the foundation you need to create a stable and lifelong career All Nucor Teammates have the opportunity to receive a full benefits package, including: Medical/Dental/Vision insurances; Long-Term Disability Insurance; Life Insurance for you and your family; Vacation Days; Paid Holidays; 401K with Company Match; Nucor Profit Share Program; Nucor Stock Purchase Program; College Tuition Reimbursement program for you and your spouse; and a College Tuition Scholarship program for children of employees. Basic Job Functions: The role of the Maintenance Technician is to drive positive results in the Production Department to meet all NRF Division goals and continuously build a World-Class Rebar Fabrication facility to take care of Nucor's Customers. This will include, but is not limited to: Assist the safety team in the design, development and/or installation of machine guards and safety devices Perform routine maintenance to ensure safe and optimum functioning of equipment, systems, and processes Troubleshoot, repair, and modify equipment to maintain workplace safety and production efficiency Generat parts lists and labor time estimates for maintenance and repairs Advise Production Supervisor on machine purchasing and installation Train key shop teammates on new equipment and/or modifications to existing equipment Maintain repair records Other duties as assigned by Production Supervisor Minimum Qualifications: •Legally authorized to work in the United States without company sponsorship now or in the future. •Minimum two years' experience working on hydraulic, pneumatic and electrical maintenance and repairs •Ability to read and interpret schematic diagrams Preferred Qualifications: •2 or more years working experience in an industrial plant •2-year degree in mechanical/electrical or related field •AC & DC motor knowledge and experience •VFD knowledge and experience •Power transformer knowledge and experience •Programmable Logic Controller knowledge and experience •Formal electrical safety knowledge and experience •Experience in operation of forklift, mobile crane, and/or other mobile equipment Additionally: •Accountability - Displays responsibility with work habits and has ability to hold others accountable for desired results. •Initiative - Being proactive with seeking out work that needs to be done and being willing to take on responsibilities and challenges. •Teamwork - Encouraging and building mutual trust, respect, and cooperation among team members as well as effectively managing and resolving conflict as needed while working in a coordinated effort with others to achieve a common goal. •Problem Solving - Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions. •Maintenance Systems and Techniques - Knowledge of servicing, repairing, adjusting, and testing equipment, systems, and processes. Strong familiarity and comfort with electrical systems. •Attention to Detail - Thorough in accomplishing tasks, no matter how small they may be, and taking care to make sure that expectations are met. •Communication Skills - The ability to give full attention to what others are saying and communicating information so that others will understand. •Judgment/Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. We are a drug-free workplace and conduct drug testing. Nucor Rebar Fabrication is seeking applicants for our Maintenance Technician position supporting our location in Riverside, AL. We are North America's leading fabricator, installer and distributor of concrete reinforcing steel and related products. Teammates are the key to our success and every teammate can and does make a difference. We prioritize safety in everything we do. A career at Nucor Rebar Fabrication means stability, being heard and respected, and opportunity for personal and professional growth. Nucor, our parent company, is a Fortune 100 company recently named Fortune's best workplace in Manufacturing and Production. Nucor is committed to being good stewards of the environment and is constantly striving to find new and innovative ways to decrease our carbon footprint. Each branch of Nucor Rebar Fabrication works together as a team to be the best in the business. We're looking to add a hardworking teammate with integrity, problem-solving skills and who is not afraid of hard work. Benefits: Medical and dental are just the beginning. We value our teammates and offer a benefits package that also includes a bonus program, profit sharing, retirement savings, vacation and holiday pay, scholarship and tuition reimbursement, and unlimited growth potential. When you join Nucor Rebar Fabrication you are joining a fast-paced and stable work environment. For more information on our benefits go to .
Why Join Altec? Be a part of a respected company in business for over 95 years. Altec NUECO provides used equipment to our customers as well as an exit strategy for disposing of existing equipment. Our associates are vital in helping us deliver on Altec's commitment to be there for the life of the equipment. Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity People are our Greatest Strength - Quality - Spiritual Development - Teamwork Apply at Take a Career Step Should you wish to further your education, Altec will pay for you to get your Bachelor's Degree after 6 months of employment and provides a way to do that totally online. Altec Inc. is a financially stable company with a history of continuous growth, providing a pool of resources to draw on and with a focus on continuous improvement. Altec specializes in aerial devices, digger derricks, cranes, telecom, and specialty equipment, supporting customers in over 100 countries throughout the world. Purpose: The purpose of this position is to assist technicians with repairs and preparing units for customer delivery. Serves in a non-technical role not requiring specialized skill or autonomy. Safety is a primary responsibility in everything we do, as is adhering to the Altec Company Values. Requirements: High School Diploma/GED required. Mechanical Aptitude required. Ability to satisfactorily complete all required/assigned training. Ability to seek out appropriate associate for assistance. Ability to drive motor vehicles and operate forklifts. Physical effort is required to move objects that may weigh up to 75 pounds. Frequent stooping, bending, squatting and kneeling are required to service and repair equipment. A high level of dexterity is required in the use of a variety of hand and power tools Overtime and shift work may be required. Ensures appropriate reviews have been performed as needed for high quality Major Responsibilities: Transfers tools, parts, equipment, and supplies to and from work stations and other areas. Holds or gathers tools, parts, equipment, and supplies for other workers. Moves vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Adjusts, maintains, and repairs tools, equipment, and machines, and assist skilled workers with similar tasks. Maintains work area in a safe, clean, and orderly manner. Performs all tasks in a manner fully consistent with Altec Safety practices and procedures. Notifies technicians or supervisors of situations that may impact a customer relationship. Provides accurate and sufficient information on all required documents. Demonstrates Altec Company Values. Performs other duties as assigned. Altec provides competitive pay which rewards performance, plus comprehensive benefits including Medical, Dental and Prescription Drug Program, Retirement 401(k) Program, Vacation and Holidays, Flexible Spending Accounts, Tuition Assistance Program, Employee Assistance and Mental Health/Substance Abuse Program, Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
10/07/2025
Full time
Why Join Altec? Be a part of a respected company in business for over 95 years. Altec NUECO provides used equipment to our customers as well as an exit strategy for disposing of existing equipment. Our associates are vital in helping us deliver on Altec's commitment to be there for the life of the equipment. Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity People are our Greatest Strength - Quality - Spiritual Development - Teamwork Apply at Take a Career Step Should you wish to further your education, Altec will pay for you to get your Bachelor's Degree after 6 months of employment and provides a way to do that totally online. Altec Inc. is a financially stable company with a history of continuous growth, providing a pool of resources to draw on and with a focus on continuous improvement. Altec specializes in aerial devices, digger derricks, cranes, telecom, and specialty equipment, supporting customers in over 100 countries throughout the world. Purpose: The purpose of this position is to assist technicians with repairs and preparing units for customer delivery. Serves in a non-technical role not requiring specialized skill or autonomy. Safety is a primary responsibility in everything we do, as is adhering to the Altec Company Values. Requirements: High School Diploma/GED required. Mechanical Aptitude required. Ability to satisfactorily complete all required/assigned training. Ability to seek out appropriate associate for assistance. Ability to drive motor vehicles and operate forklifts. Physical effort is required to move objects that may weigh up to 75 pounds. Frequent stooping, bending, squatting and kneeling are required to service and repair equipment. A high level of dexterity is required in the use of a variety of hand and power tools Overtime and shift work may be required. Ensures appropriate reviews have been performed as needed for high quality Major Responsibilities: Transfers tools, parts, equipment, and supplies to and from work stations and other areas. Holds or gathers tools, parts, equipment, and supplies for other workers. Moves vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Adjusts, maintains, and repairs tools, equipment, and machines, and assist skilled workers with similar tasks. Maintains work area in a safe, clean, and orderly manner. Performs all tasks in a manner fully consistent with Altec Safety practices and procedures. Notifies technicians or supervisors of situations that may impact a customer relationship. Provides accurate and sufficient information on all required documents. Demonstrates Altec Company Values. Performs other duties as assigned. Altec provides competitive pay which rewards performance, plus comprehensive benefits including Medical, Dental and Prescription Drug Program, Retirement 401(k) Program, Vacation and Holidays, Flexible Spending Accounts, Tuition Assistance Program, Employee Assistance and Mental Health/Substance Abuse Program, Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. Required Preferred Job Industries Maintenance & Janitorial
10/07/2025
Full time
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. Required Preferred Job Industries Maintenance & Janitorial
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. Required Preferred Job Industries Maintenance & Janitorial
10/07/2025
Full time
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. Required Preferred Job Industries Maintenance & Janitorial
Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! QUALITY CONTROL INSPECTOR III Overview: The Quality Control Inspector III is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments. Minimum Required Qualifications : Technical school diploma or equivalent combination of education and experience 3-5 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment. Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments. knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection. Familiar with AQL, sampling methods and traceability. Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc. Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc. Must be a US Citizen Essential or Primary / Key Responsibilities : Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis. Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages. Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL Reconcile final inspection documentation for shipments Interact with source inspector as needed and part-take in source inspection duties if necessary. Read, understand and interpret Mechanical/Electronic drawings. Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step. Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor. Approve finished products by confirming specifications, conducting visual and physical measurement of the product. Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs Work with Engineering, Operations, and other sources to resolve issues and meet goals Additional Duties / Responsibilities : Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals Consistently demonstrate commitment to company values Keep management informed of area activities and of any significant problems Assume responsibility for related duties as required or assigned Ensure that work area and work areas of direct reports are clean, secure, and well maintained Complete special projects and miscellaneous assignments as required Work Environment : While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud. This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required). This is a full-time position. Days and hours of work are 8 hours, Monday through Friday. Occasional overtime and weekend work may be required as job duties demand. No travel is expected for this position. Physical Requirements : While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch The employee may be required to lift and/or move items weighing up to 25 pounds. This position is at our Montville, NJ office location. Pay Range: $30.50 - $38.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30.50 - $38.00 per hour
10/07/2025
Full time
Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! QUALITY CONTROL INSPECTOR III Overview: The Quality Control Inspector III is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments. Minimum Required Qualifications : Technical school diploma or equivalent combination of education and experience 3-5 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment. Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments. knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection. Familiar with AQL, sampling methods and traceability. Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc. Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc. Must be a US Citizen Essential or Primary / Key Responsibilities : Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis. Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages. Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL Reconcile final inspection documentation for shipments Interact with source inspector as needed and part-take in source inspection duties if necessary. Read, understand and interpret Mechanical/Electronic drawings. Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step. Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor. Approve finished products by confirming specifications, conducting visual and physical measurement of the product. Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs Work with Engineering, Operations, and other sources to resolve issues and meet goals Additional Duties / Responsibilities : Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals Consistently demonstrate commitment to company values Keep management informed of area activities and of any significant problems Assume responsibility for related duties as required or assigned Ensure that work area and work areas of direct reports are clean, secure, and well maintained Complete special projects and miscellaneous assignments as required Work Environment : While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud. This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required). This is a full-time position. Days and hours of work are 8 hours, Monday through Friday. Occasional overtime and weekend work may be required as job duties demand. No travel is expected for this position. Physical Requirements : While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch The employee may be required to lift and/or move items weighing up to 25 pounds. This position is at our Montville, NJ office location. Pay Range: $30.50 - $38.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30.50 - $38.00 per hour
Why Join Altec? Altec is a manufacturing company, Made in America. Altec associates are empowered to build products that make a difference to our customers, communities, and industry. We are building on 90+ years of knowledge, experience, and relationships, working to add value to the electric utility, telecom, contractor, lights and signs, and tree care markets. Altec products and services can be found across the U.S. and in over 100 countries around the world. The purpose of this position is to assist technicians with repairs and preparing units for customer delivery. Serves in a non-technical role not requiring specialized skill or autonomy. Safety is a primary responsibility in everything we do as is adhering to the Altec Company Values. $20 to $21 per hour Apply now at Basic Qualifications, Experience, and Skills Required Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. High School Diploma/GED Mechanical Aptitude Ability to satisfactorily complete all required/assigned training Ability to seek out appropriate associate for assistance Ability to drive motor vehicles and operate forklifts Physical effort is required to move objects that may weigh up to 75 pounds Frequent stooping, bending, squatting and kneeling are required to service and repair equipment A high level of dexterity is required in the use of a variety of hand and power tools Overtime and shift work may be required Ensures appropriate reviews have been performed as needed for high quality Requires outside and inside contacts to carry out company policy and programs; improper handling may have effect on operational results; must often deal with matters requiring explanation and obtaining of approvals Major Responsibilities Transfers tools, parts, equipment, and supplies to and from workstations and other areas Holds or gathers tools, parts, equipment, and supplies for other workers Moves vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Adjusts, maintains, and repairs tools, equipment, and machines, and assist skilled workers with similar tasks. Maintains work area in a safe, clean, and orderly manner Performs all tasks in a manner fully consistent with Altec Safety practices and procedures. Notifies technicians or supervisors of situations that may impact a customer relationship. Provides accurate and sufficient information on all required documents. Performs other duties as assigned. Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork Competitive pay which rewards performance Comprehensive benefits including Medical, Dental and Prescription Drug Program - Retirement 401(k) Program - Vacation and Holidays - Flexible Spending Accounts - Tuition Assistance Program - Employee Assistance and Mental Health/Substance Abuse Program - Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
10/07/2025
Full time
Why Join Altec? Altec is a manufacturing company, Made in America. Altec associates are empowered to build products that make a difference to our customers, communities, and industry. We are building on 90+ years of knowledge, experience, and relationships, working to add value to the electric utility, telecom, contractor, lights and signs, and tree care markets. Altec products and services can be found across the U.S. and in over 100 countries around the world. The purpose of this position is to assist technicians with repairs and preparing units for customer delivery. Serves in a non-technical role not requiring specialized skill or autonomy. Safety is a primary responsibility in everything we do as is adhering to the Altec Company Values. $20 to $21 per hour Apply now at Basic Qualifications, Experience, and Skills Required Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. High School Diploma/GED Mechanical Aptitude Ability to satisfactorily complete all required/assigned training Ability to seek out appropriate associate for assistance Ability to drive motor vehicles and operate forklifts Physical effort is required to move objects that may weigh up to 75 pounds Frequent stooping, bending, squatting and kneeling are required to service and repair equipment A high level of dexterity is required in the use of a variety of hand and power tools Overtime and shift work may be required Ensures appropriate reviews have been performed as needed for high quality Requires outside and inside contacts to carry out company policy and programs; improper handling may have effect on operational results; must often deal with matters requiring explanation and obtaining of approvals Major Responsibilities Transfers tools, parts, equipment, and supplies to and from workstations and other areas Holds or gathers tools, parts, equipment, and supplies for other workers Moves vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Adjusts, maintains, and repairs tools, equipment, and machines, and assist skilled workers with similar tasks. Maintains work area in a safe, clean, and orderly manner Performs all tasks in a manner fully consistent with Altec Safety practices and procedures. Notifies technicians or supervisors of situations that may impact a customer relationship. Provides accurate and sufficient information on all required documents. Performs other duties as assigned. Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork Competitive pay which rewards performance Comprehensive benefits including Medical, Dental and Prescription Drug Program - Retirement 401(k) Program - Vacation and Holidays - Flexible Spending Accounts - Tuition Assistance Program - Employee Assistance and Mental Health/Substance Abuse Program - Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, pregnancy, sexual orientation, marital status, gender identity, national origin, citizenship status, age, disability or protected veteran status. Shift: 2pm to Midnight Must have at least 4 years of Fleet Maintenance experience and 2 years of supervisory experience. I. Job Summary Supervises and provides direct leadership for technicians. Manages work flow and assigns tasks. II. Essential Duties and Responsibilities Oversees the day-to-day operations of employees in the maintenance shop. Coordinates and supervises all maintenance work and repairs, and monitors progress and quality. Reviews driver repairs and other maintenance requests and prepares work order documents. Performs mechanical duties as needed. Monitors inventory of replacement parts and restocks as needed. Oversees personnel including coaching, training, evaluating employee performance, and conducting disciplinary action as needed. Provides input into termination, compensation, and promotion decisions. Interprets and ensures consistent application of organizational policies and safety regulations. Creates and submits reports as necessary. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited) 4 years years of relevant work experience. (in addition to education requirements) Valid Driver's License IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) rarely; Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally; This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
10/07/2025
Full time
As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, pregnancy, sexual orientation, marital status, gender identity, national origin, citizenship status, age, disability or protected veteran status. Shift: 2pm to Midnight Must have at least 4 years of Fleet Maintenance experience and 2 years of supervisory experience. I. Job Summary Supervises and provides direct leadership for technicians. Manages work flow and assigns tasks. II. Essential Duties and Responsibilities Oversees the day-to-day operations of employees in the maintenance shop. Coordinates and supervises all maintenance work and repairs, and monitors progress and quality. Reviews driver repairs and other maintenance requests and prepares work order documents. Performs mechanical duties as needed. Monitors inventory of replacement parts and restocks as needed. Oversees personnel including coaching, training, evaluating employee performance, and conducting disciplinary action as needed. Provides input into termination, compensation, and promotion decisions. Interprets and ensures consistent application of organizational policies and safety regulations. Creates and submits reports as necessary. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited) 4 years years of relevant work experience. (in addition to education requirements) Valid Driver's License IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) rarely; Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally; This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
JOB SUMMARY This is an Operations position responsible for managing the activities associated with maintaining the fleet maintenance department. Responsibilities include, but are not limited to; supervising the company shop and shop personnel for the maintenance, diagnosis, and repair of the Sysco fleet, ensuring safety and security of the shop and fleet, and providing general supervision and direction to shop staff. The position is also responsible for administrative duties including parts procurement, inventory management, asset tracking and cost control through maintenance systems. RESPONSIBILITIES Supervises the daily work and safety of associates engaged in fleet maintenance and repair. Oversees labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Administers the proper utilization of Company assets in support of the fleet maintenance department. Coordinates required processes and repairs with proper departments as necessary. Assist with ensuring the proper scheduling of truck maintenance and repairs; along with compliance of all company programs, including preventative maintenance and inspection of vehicles, non-scheduled maintenance and troubleshooting, repair, rebuild and overhaul of vehicles. Review fleet maintenance functions and various operational and expense reporting. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet maintenance. Conducts audit daily to ensure all required documentation is accurately completed (including all work orders, breakdowns, preventative maintenance logs, pre/post-trip inspections, certifications) and that items are installed correctly with a minimum potential for loss. Supervises parts inventory and issues required purchase orders based on anticipated needs. Aid with oversight of a fleet services budget to include a review of past year income and expenses; adjusts and administers all fleet service purchases including parts, tools and office supplies. Assist with budgets and contracts between third party vendor services to ensure efficient operations. Help with ensuring proper licensing of fleet vehicles and annual vehicle/trailer inspections. Stay current with technical manuals, literature and technical advancements of the trade as it pertains to company-owned vehicles. Maintains associate relations through regular department or pre-shift meetings; maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale, and submits and respond to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Implement management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Sustains with ensuring compliance with all Company and safety rules, policies and procedures. Ensures compliance with local, state and federal regulatory agencies (i.e., OSHA, DOT, and EFC). QUALIFICATIONS Education High school diploma or general education degree (GED). Experience 1-3 years maintenance experience; or equivalent combination of education and related experience. Certificates, Licenses, and Registrations Must possess a valid state Driver's License meeting Company standards. Complete a Sysco approved defensive driving program. Class A CDL preferred. Powered Industrial Equipment Certification from Sysco. Trailer Refer (608) Certification required. Cab Air (609) Certification required. Air Brake Certification required. Automotive Service Excellence (ASE) Certification preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Knowledge of methods, techniques, and procedures involved in repairs and replacement. Understanding of vehicle operations and safety guidelines. Proficient in the use of all tools of the trade, shop equipment, and power tools including but not limited to jacks, hydraulic lifts, air tools, and diagnostic equipment. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions: The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the Corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity.
10/07/2025
Full time
JOB SUMMARY This is an Operations position responsible for managing the activities associated with maintaining the fleet maintenance department. Responsibilities include, but are not limited to; supervising the company shop and shop personnel for the maintenance, diagnosis, and repair of the Sysco fleet, ensuring safety and security of the shop and fleet, and providing general supervision and direction to shop staff. The position is also responsible for administrative duties including parts procurement, inventory management, asset tracking and cost control through maintenance systems. RESPONSIBILITIES Supervises the daily work and safety of associates engaged in fleet maintenance and repair. Oversees labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Administers the proper utilization of Company assets in support of the fleet maintenance department. Coordinates required processes and repairs with proper departments as necessary. Assist with ensuring the proper scheduling of truck maintenance and repairs; along with compliance of all company programs, including preventative maintenance and inspection of vehicles, non-scheduled maintenance and troubleshooting, repair, rebuild and overhaul of vehicles. Review fleet maintenance functions and various operational and expense reporting. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet maintenance. Conducts audit daily to ensure all required documentation is accurately completed (including all work orders, breakdowns, preventative maintenance logs, pre/post-trip inspections, certifications) and that items are installed correctly with a minimum potential for loss. Supervises parts inventory and issues required purchase orders based on anticipated needs. Aid with oversight of a fleet services budget to include a review of past year income and expenses; adjusts and administers all fleet service purchases including parts, tools and office supplies. Assist with budgets and contracts between third party vendor services to ensure efficient operations. Help with ensuring proper licensing of fleet vehicles and annual vehicle/trailer inspections. Stay current with technical manuals, literature and technical advancements of the trade as it pertains to company-owned vehicles. Maintains associate relations through regular department or pre-shift meetings; maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale, and submits and respond to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Implement management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Sustains with ensuring compliance with all Company and safety rules, policies and procedures. Ensures compliance with local, state and federal regulatory agencies (i.e., OSHA, DOT, and EFC). QUALIFICATIONS Education High school diploma or general education degree (GED). Experience 1-3 years maintenance experience; or equivalent combination of education and related experience. Certificates, Licenses, and Registrations Must possess a valid state Driver's License meeting Company standards. Complete a Sysco approved defensive driving program. Class A CDL preferred. Powered Industrial Equipment Certification from Sysco. Trailer Refer (608) Certification required. Cab Air (609) Certification required. Air Brake Certification required. Automotive Service Excellence (ASE) Certification preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Knowledge of methods, techniques, and procedures involved in repairs and replacement. Understanding of vehicle operations and safety guidelines. Proficient in the use of all tools of the trade, shop equipment, and power tools including but not limited to jacks, hydraulic lifts, air tools, and diagnostic equipment. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions: The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the Corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity.
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity.
10/06/2025
Full time
JOB SUMMARY This is an Operations position responsible for directing the activities associated with the general maintenance, repair, and appearance of the facility, fleet shop, outside grounds, office space, beverage department, security, and power industrial equipment and third party providers. Responsibilities include, but are not limited to, expense management, compliance with government regulations, ensuring safety and security of the building, its contents, and people and providing management and direction to beverage, fleet, and facility maintenance staff. RESPONSIBILITIES Directs the daily work and safety of associates engaged in building, grounds, sanitation, fleet maintenance, and repair, refrigeration systems, beverage department, power industrial equipment, and security. Advises labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Coordinates emergency response or crisis management activities, develops and maintains liaisons with local emergency management and other entities to facilitate plan development, response effort coordination and assists safety manager with training initiatives. Conducts the proper selection, purchase, utilization, and inventory of Company assets in support of the fleet and facilities departments. Collaborate with other departments as necessary to ensure upgrades and repairs are completed efficiently and effectively. Develop business relationships to ensure communication and efficient operations with third-party vendors, including but not limited to, janitorial, pest services, security, external contractors, fleet and facility maintenance and beverage. Maintains current certificate of insurance and hold harmless agreements for all contracted vendors. Prepares budget, profit plans, and capital requests as required. Evaluates metrics and adjusts activities to meet or exceed performance expectations. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within fleet and facility maintenance, beverage, power industrial equipment and security. Establishes preventative maintenance schedules for all systems, equipment, and buildings including: ammonia refrigeration system, Heating, Ventilation, and Air Conditioning (HVAC) Systems, fire protection and security systems, electrical and energy management, dock doors/dock plate systems, power industrial equipment, building components (roof, interior and exterior floors/walls, doors, paved surfaces and landscaping). Handles priorities, assigns and monitors fleet and facility projects for quality and timely completion. Utilizes maintenance tracking software for task management. Administers audits ensuring all required inspections and documentation are completed accurately (including but not limited to food safety documentation, Department of Transportation (DOT) records, EPSM, PSM, etc.) and retained to ensure the minimum potential for loss. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, up-dating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Ensures accurate and up-dated re-certifications of commercial equipment and Commercial Vehicle Operators Registration (CVOR) (Canada) are compliant. Complies with local, state and federal regulatory agencies (i.e. OSHA, etc.) QUALIFICATIONS Education Bachelor's degree required or equivalent combination of education and related experience. Experience 7 years maintenance management experience required. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Level 1 Ammonia Operation Certification required. HAZWOPER 24 hrs Training required. Incident Commander Training required, or obtains within 12 months. Certificate, licenses and registrations in refrigeration required. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Certificate in diesel engines, electrical, hydraulic, pneumatic and braking systems preferred. Certificate in fleet trade/mechanic preferred. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Able to write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Working knowledge of ammonia and Freon systems. Proven knowledge of environmental regulations/legislation and governing bodies. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Condition To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places and confined spaces. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity.
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtime Strong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $28-34/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
10/06/2025
Full time
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtime Strong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $28-34/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtime Strong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $28-34/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
10/06/2025
Full time
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtime Strong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $28-34/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtimeStrong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $29-35/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
10/06/2025
Full time
Why Join Altec? On-demand access to technical support, direct parts, and engineeringMulti-level technician career progression programOngoing training on Altec equipmentCompetitive compensation that rewards performanceComprehensive benefits including affordable medical options, dental and vision care, matching 401(k), company-paid Basic Life, wellness programs, company events, paid vacationPotential to work overtimeStrong in spirit and industry knowledge, Altec mechanics are the best in the industry. If you are a career-minded equipment mechanic seeking a cleaner, smarter work environment or a field mechanic willing and able to repair equipment vital to our nation's infrastructure, and if you are ready to join a team of 45+ service centers and a broad network of mobile technicians, then we want to meet you! Hourly rate and potential for overtime varies relative to experience and location. Job openings exist across the U.S. and Canada. Pay: $29-35/hr depending on experience and skill Should the selected candidate meet the qualifications of a more experienced level in the career path, the job level may be adjusted. Altec, family-owned since 1929, has the reach and resources of a large organization with the heart of a local firm. "More than just building equipment, we also build relationships." Altec products and services can be found across the U.S. and in over 100 countries around the world. Safety is a primary responsibility in everything we do as is support of the Altec Company Values: Customer First - Enjoyment of Work - Family - Financial Stability - Integrity - People are our Greatest Strength - Quality - Spiritual Development - Teamwork The Ideal Background: Experience with aerial devices, digger derricks, chippers, cranes; or construction, mining, farm equipment such as excavators, skid steers, dozers or tractors; or military heavy equipment such as the MRAP vehicle, HMEE, or tanks; aircraft and aerospace or ground support equipment (AGE/GSE) or similarPrevious experience as a mechanic or technician, with a focus on heavy equipmentEducation in mechanics, electrical or hydraulic systemsThe Job: Perform replacement of electrical, hydraulic, and mechanical componentsUtilize all technical support resources (such as operator, parts, and maintenance manuals, HowFactory, etc.) in troubleshooting, determining procedures, and identifying parts needed for repairPerform Unit Condition Inspections and ReportsMaintain work area in a safe, clean, and orderly mannerPerform all tasks in a manner fully consistent with Altec Safety practices and proceduresAdvise supervisors of situations that may impact a customer relationshipProvide accurate and sufficient information on all required documentsDemonstrate Altec Company ValuesAll other duties as assignedThe Requirements: High School Diploma, state-approved High School Equivalency, or GEDStrong interpersonal, customer service, and organizational skillsPhysical effort to move objects and tools that may weigh up to 75 pounds; frequent stooping, bending, squatting, and kneelingA high level of dexterityAs needed, provide basic tools per the Altec tool policyDrive motor vehiclesDevelop basic computer skills with Microsoft officeAbility to support customer by working overtimeAdvocate safety in everything we doAltec offers a competitive salary that rewards performance and dedication, along with a comprehensive benefits package, which includes: MedicalDentalVisionPaid Vacation and HolidaysRetirement 401(k) ProgramPrescription Safety GlassesTuition ReimbursementEmployee Assistance and Mental Health/Substance Abuse ProgramWellness Rewards ProgramLife InsuranceAltec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.
