Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
10/15/2025
Full time
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington. As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5" x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications. Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding. Document any discrepancies and report them to the appropriate personnel for resolution. Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications. Witness and document functional tests of aircraft components and systems to detect leaks. Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies. Maintain personal and tool certifications, ensuring compliance with operational standards. Assist and train other employees on inspection methods and procedures, providing guidance as needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience in Aerospace, Manufacturing, Quality, or experience in a regulated industry Ability to work in confined spaces (work within or pass through). Entry diameter 9.5"X17.7". Ability to complete Fall Protection Training. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to use a respirator or have been respirator certified. Proficiency in reading, writing, and speaking English. Preferred Qualifications: Experience working with precision measuring tools. Experience sealing Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
10/15/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington. As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5" x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications. Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding. Document any discrepancies and report them to the appropriate personnel for resolution. Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications. Witness and document functional tests of aircraft components and systems to detect leaks. Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies. Maintain personal and tool certifications, ensuring compliance with operational standards. Assist and train other employees on inspection methods and procedures, providing guidance as needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience in Aerospace, Manufacturing, Quality, or experience in a regulated industry Ability to work in confined spaces (work within or pass through). Entry diameter 9.5"X17.7". Ability to complete Fall Protection Training. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to use a respirator or have been respirator certified. Proficiency in reading, writing, and speaking English. Preferred Qualifications: Experience working with precision measuring tools. Experience sealing Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
10/15/2025
Full time
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
Location: 110 Shirley Store Road, Anderson, SC 29621 On-Site We are seeking a detail-oriented Quality Control Inspector to join our team. The ideal candidate will be responsible for ensuring that products meet the required quality standards and comply with industry regulations. This role is crucial in maintaining the integrity of our production processes and ensuring customer satisfaction through high-quality products.
10/15/2025
Full time
Location: 110 Shirley Store Road, Anderson, SC 29621 On-Site We are seeking a detail-oriented Quality Control Inspector to join our team. The ideal candidate will be responsible for ensuring that products meet the required quality standards and comply with industry regulations. This role is crucial in maintaining the integrity of our production processes and ensuring customer satisfaction through high-quality products.
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
10/15/2025
Full time
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
10/15/2025
Full time
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
10/15/2025
Full time
Quality Control Key Responsibilities: Microsoft/Excel proficiency required. Conducting visual inspections of raw materials, components, and finished products to ensure they meet quality specifications and regulatory requirements, Performing physical and chemical tests on samples using equipment such as calipers, micrometers, spectrophotometers, and other laboratory instruments, Documenting test results accurately and maintaining detailed records of quality control activities, Collaborating with production teams to address any quality issues and implement corrective actions as needed, Following safety guidelines and procedures to ensure a safe working environment, Communicating effectively with supervisors and team members regarding quality control findings and recommendations, Assisting in the investigation of customer complaints or product non-conformances. High school diploma or equivalent. Veterans are encouraged to apply. Prior experience in food services preferred but not required. Previous experience in packing or a similar role is preferred but not required. Strong attention to detail and accuracy. Ability to work well in a team environment. Basic math skills for counting and recording inventory. Willingness to work flexible hours, including weekends . Physical demands: Standing : Prolonged periods of standing on production floor (up to 8-10 hours per shift). Walking : Frequent walking around production and packaging areas. Lifting : Occasionally lift and move products or materials up to 25-50 lbs. Bending/Stooping : Regular bending to inspect lower-level machinery or products. Reaching : Frequent reaching over and around equipment or conveyors. Climbing : Occasionally climb steps or ladders to access equipment or inspection points. Repetitive Motions : Repetitive hand and arm movements when conducting tests or entering data.
Utility Pole Inspection Project Manager - Oklahoma City, OK Utility Pole Inspection Project Manager Position Summary: Alamon, Inc., a Montana-based employee-owned company since 1975, provides installation services to the utilities, energy, and communications industries nationwide. There is no ceiling when it comes to your professional growth at Alamon, an employee - owned company. Alamon, Inc. seeks a Utility Pole Inspection Project Manager for its Utility West department. This position entails: Overseeing and managing a team of Inspectors in assessing the quality, safety, and compliance of utility poles. The Project Manager will ensure the successful execution of all projects while adhering to all quality, safety, and budgetary standards. The Utility Pole Project Manager will be responsible for coordinating resources and materials, overseeing projects to ensure quality and timely completion, and communicating with the clients, the community, and staff. Watch this video to see how great a career at Alamon can be! Welcome to Alamon Job Description: Plan and monitor project progression. Coordinate staff and effectively forecast needs throughout the entirety of the project. Support recruiting efforts. Provide quality feedback and coaching to employees. Manage the rate of production and required deliverables to the client. Work with and manage multiple pole inspection crews on an inspections project. Serve as point of contact for the client, public and field staff. Allocate resources, including personnel, equipment, and materials to ensure efficient and accurate inspections. Ensure that safety protocols and guidelines are strictly followed to maintain a safe and secure working environment. Establish and enforce all quality control measures to ensure accurate and consistent inspection results. Review inspection reports and data collection. Oversee inspection projects to ensure they are conducted accurately, safely and in compliance with regulations. Maintain accurate and comprehensive project documentation, including project plans, schedules, inspection reports and correspondence. Be safety conscious and always follow company safety policies and procedures. Wear appropriate safety equipment (PPE) and follow established safety procedures. Demonstrate leadership abilities to successfully complete job tasks while accepting full responsibility for the safe operations and maintenance of the vehicle, equipment, and tools. Perform other job-related duties as assigned. Minimum Position Qualifications: Minimum of 1 year experience as a Utility Pole Inspector Foreman or in a related field. Minimum of 1 years' experience in a supervisory role is preferred. Must be at least 21 years of age and have a high school diploma or GED. Possess a current and valid driver's license with a clean driving record and no DUI/DWIs within the past 5 years. Must pass the pre-employment screening process, drug test and MVR pull. Willing to travel locally, statewide, or regionally as required. Must be able to read and understand written and verbal instructions and work orders. Possess a professional attitude that will positively represent Alamon to clients and the communities in which they work. Work Environment: This position will work outdoors, year-round, in all weather conditions, and on varying terrain. May work for extended periods in hot, cold, wet, windy, or icy conditions. Exposure to dust, odors, gasses, vapors, wet or slick surfaces, and loud noises is possible. Must always wear personal protective equipment (PPE) in compliance with Company standards and governmental regulations. Physical Demands: This is a physically arduous position that requires working outside in varying weather types and exposure to the elements. This position requires hiking and standing for long periods of time. Some jobs may require digging. Must be able to lift and carry up to 40lbs. Must be able to sit for extended periods of time to travel to and from job sites. Travel Requirements: This is a full-time traveling position that requires extensive travel where you will be on the road for upwards of 5 weeks at a time. Transportation and lodging are provided while traveling. Education and Experience: Highschool Diploma or GED Preferred. Benefits: Medical Insurance Dental Insurance Life Insurance policy Pharmacy Benefits Paid Holidays Paid time off Vacation time Employer-paid health insurance for each full-time employee ESOP company= Employee Stock Ownership Plan Lodging and transportation are provided while traveling. Work Authorization: Alamon does not currently support the H1B VISA for this position. EOE: Alamon Inc is an equal opportunity employer. As an Equal Opportunity Employer, Alamon Inc does not discriminate in employment decisions based on race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable state and local laws. Compensation details: 30-34 PI39fdee8a5-
10/15/2025
Full time
Utility Pole Inspection Project Manager - Oklahoma City, OK Utility Pole Inspection Project Manager Position Summary: Alamon, Inc., a Montana-based employee-owned company since 1975, provides installation services to the utilities, energy, and communications industries nationwide. There is no ceiling when it comes to your professional growth at Alamon, an employee - owned company. Alamon, Inc. seeks a Utility Pole Inspection Project Manager for its Utility West department. This position entails: Overseeing and managing a team of Inspectors in assessing the quality, safety, and compliance of utility poles. The Project Manager will ensure the successful execution of all projects while adhering to all quality, safety, and budgetary standards. The Utility Pole Project Manager will be responsible for coordinating resources and materials, overseeing projects to ensure quality and timely completion, and communicating with the clients, the community, and staff. Watch this video to see how great a career at Alamon can be! Welcome to Alamon Job Description: Plan and monitor project progression. Coordinate staff and effectively forecast needs throughout the entirety of the project. Support recruiting efforts. Provide quality feedback and coaching to employees. Manage the rate of production and required deliverables to the client. Work with and manage multiple pole inspection crews on an inspections project. Serve as point of contact for the client, public and field staff. Allocate resources, including personnel, equipment, and materials to ensure efficient and accurate inspections. Ensure that safety protocols and guidelines are strictly followed to maintain a safe and secure working environment. Establish and enforce all quality control measures to ensure accurate and consistent inspection results. Review inspection reports and data collection. Oversee inspection projects to ensure they are conducted accurately, safely and in compliance with regulations. Maintain accurate and comprehensive project documentation, including project plans, schedules, inspection reports and correspondence. Be safety conscious and always follow company safety policies and procedures. Wear appropriate safety equipment (PPE) and follow established safety procedures. Demonstrate leadership abilities to successfully complete job tasks while accepting full responsibility for the safe operations and maintenance of the vehicle, equipment, and tools. Perform other job-related duties as assigned. Minimum Position Qualifications: Minimum of 1 year experience as a Utility Pole Inspector Foreman or in a related field. Minimum of 1 years' experience in a supervisory role is preferred. Must be at least 21 years of age and have a high school diploma or GED. Possess a current and valid driver's license with a clean driving record and no DUI/DWIs within the past 5 years. Must pass the pre-employment screening process, drug test and MVR pull. Willing to travel locally, statewide, or regionally as required. Must be able to read and understand written and verbal instructions and work orders. Possess a professional attitude that will positively represent Alamon to clients and the communities in which they work. Work Environment: This position will work outdoors, year-round, in all weather conditions, and on varying terrain. May work for extended periods in hot, cold, wet, windy, or icy conditions. Exposure to dust, odors, gasses, vapors, wet or slick surfaces, and loud noises is possible. Must always wear personal protective equipment (PPE) in compliance with Company standards and governmental regulations. Physical Demands: This is a physically arduous position that requires working outside in varying weather types and exposure to the elements. This position requires hiking and standing for long periods of time. Some jobs may require digging. Must be able to lift and carry up to 40lbs. Must be able to sit for extended periods of time to travel to and from job sites. Travel Requirements: This is a full-time traveling position that requires extensive travel where you will be on the road for upwards of 5 weeks at a time. Transportation and lodging are provided while traveling. Education and Experience: Highschool Diploma or GED Preferred. Benefits: Medical Insurance Dental Insurance Life Insurance policy Pharmacy Benefits Paid Holidays Paid time off Vacation time Employer-paid health insurance for each full-time employee ESOP company= Employee Stock Ownership Plan Lodging and transportation are provided while traveling. Work Authorization: Alamon does not currently support the H1B VISA for this position. EOE: Alamon Inc is an equal opportunity employer. As an Equal Opportunity Employer, Alamon Inc does not discriminate in employment decisions based on race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable state and local laws. Compensation details: 30-34 PI39fdee8a5-
Title: HM183 Certified Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 8am - 5pm Relocation: Reimbursement Available KAG is now seeking to hire an HM183 Certified Diesel Mechanic! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 AnnualBoot Allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays HM183 Certified Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. HM183 will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. Become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short and long term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: - Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. - Provide constructive guidance to other employees and representatives of third parties. - Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: HM183 Certified Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 8am - 5pm Relocation: Reimbursement Available KAG is now seeking to hire an HM183 Certified Diesel Mechanic! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 AnnualBoot Allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays HM183 Certified Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. HM183 will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. Become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short and long term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: - Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. - Provide constructive guidance to other employees and representatives of third parties. - Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Alternating Monday through Thursday/ Tuesday through Friday from 2p-midnight Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Alternating Monday through Thursday/ Tuesday through Friday from 2p-midnight Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic: KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers.
10/15/2025
Full time
Title: Diesel Mechanic: KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers.
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Position's Pay Range: $18.00 to $36.00 based on experience Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 18.00-36.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 7am - 4pm Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprenticeswill receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & IIwill learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level IIIwill build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: - per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 7am - 4pm Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprenticeswill receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & IIwill learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level IIIwill build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: - per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Shift Days & Times Vary Depending on Location Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 9:30am - 6pm Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 Annual Boot Allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Monday through Friday from 9:30am - 6pm Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100 Annual Boot Allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 per_hour, General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: 4 - 10hr Days (mid day and early am available) Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
10/15/2025
Full time
Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: 4 - 10hr Days (mid day and early am available) Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: 21.00-45.00 , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers
