About NY CREATES: NY CREATES serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow. NY CREATES also runs some of the most advanced facilities in the world, boasts more than 3,000 industry experts and faculty, and manages public and private investments of more than $25 billion - placing it at the global epicenter of high-tech innovation and commercialization. Job Description: JOB SUMMARY The TGCM Lead Maintenance Technician is responsible for maintaining, operating, and conducting preventative maintenance inspections, as well as performing required maintenance duties. This includes the operation, maintenance, and repair of specialty chemical and gas systems to meet required standards of purity, quality, and facility performance. In this role, the Lead Maintenance Technician will oversee all areas of responsibility. Key responsibilities include: Requirements: MINIMUM REQUIREMENTS Minimum of 5 years of experience in TGCM operations environment, mechanical maintenance or equivalent educational and professional experience in a highly technical/engineering environment. Minimum of 2 years of direct leadership experience. Technical Knowledge: Operational experience with technical training; general understanding of mechanical, electrical, and control systems. Maintenance Skills: Experience working with maintenance schedules, blueprints, diagrams, sketches, codes, and maintaining detailed and accurate records. Physical Requirements: Ability to lift and push/pull 50 lbs. regularly, frequently climb (ladders, stairs, scaffolding), and work in adverse weather conditions and exposure to hazards (moving mechanical parts, heat, cold, noise). Must possess good interpersonal and communications skills, the ability to write clearly and concisely, and proficient use of Microsoft Office, computer maintenance management programs, and other applicable computer programs. Required to wear cleanroom protective equipment and various personal protective equipment (PPE) related to work activities. Including respiratory protection, requiring technicians to be clean shaven. Must be able to carry and respond to cell phone/emails outside of regularly scheduled work hours. This position is contingent on the satisfactory completion of a background investigation; this position may require annual background investigations. Candidates must address in their applications their ability to work with culturally diverse populations. This position is contingent on the satisfactory completion of a background investigation; this position may require annual background investigations. Preferred Qualifications: 10+ years of Experience in major semiconductor manufacturer, a supplier to the semiconductor industry or similar industry, such as specialty gas/equipment supplier, pharmaceutical or medical device manufacturer desired. Additional Information: Benefits Medical, Vision, and Dental Competitive Pay and PTO Flexible Heath Spending and Dependent Care Accounts Basic / Optional Life Insurance Post-Retirement Health Insurance Employer contribution of 7% of earnings to a Basic Retirement plan after meeting one year of service. Optional employee contributed retirement account Location: 257 Fuller Road, Albany, NY 12203 Pay Rate: $36-$39/ hr Posted rate is dependent on education and experience. NOTE: Some positions require access to export-controlled commodities, technical data, technology, software, or restricted programs where U.S. Government authorization may be required. For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies. The decision to pursue an export license application is at The Research Foundation for SUNY's sole discretion. Proof of status may be required prior to employment in connection with necessary authorizations. Employment is with the Research Foundation for SUNY. The Research Foundation is an Equal Opportunity Employer, including individuals with disabilities and protected veterans. In compliance with the Americans with Disabilities Act (ADA), if you have a disability and require a reasonable accommodation to apply please call Human Resources at .
09/08/2025
Full time
About NY CREATES: NY CREATES serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow. NY CREATES also runs some of the most advanced facilities in the world, boasts more than 3,000 industry experts and faculty, and manages public and private investments of more than $25 billion - placing it at the global epicenter of high-tech innovation and commercialization. Job Description: JOB SUMMARY The TGCM Lead Maintenance Technician is responsible for maintaining, operating, and conducting preventative maintenance inspections, as well as performing required maintenance duties. This includes the operation, maintenance, and repair of specialty chemical and gas systems to meet required standards of purity, quality, and facility performance. In this role, the Lead Maintenance Technician will oversee all areas of responsibility. Key responsibilities include: Requirements: MINIMUM REQUIREMENTS Minimum of 5 years of experience in TGCM operations environment, mechanical maintenance or equivalent educational and professional experience in a highly technical/engineering environment. Minimum of 2 years of direct leadership experience. Technical Knowledge: Operational experience with technical training; general understanding of mechanical, electrical, and control systems. Maintenance Skills: Experience working with maintenance schedules, blueprints, diagrams, sketches, codes, and maintaining detailed and accurate records. Physical Requirements: Ability to lift and push/pull 50 lbs. regularly, frequently climb (ladders, stairs, scaffolding), and work in adverse weather conditions and exposure to hazards (moving mechanical parts, heat, cold, noise). Must possess good interpersonal and communications skills, the ability to write clearly and concisely, and proficient use of Microsoft Office, computer maintenance management programs, and other applicable computer programs. Required to wear cleanroom protective equipment and various personal protective equipment (PPE) related to work activities. Including respiratory protection, requiring technicians to be clean shaven. Must be able to carry and respond to cell phone/emails outside of regularly scheduled work hours. This position is contingent on the satisfactory completion of a background investigation; this position may require annual background investigations. Candidates must address in their applications their ability to work with culturally diverse populations. This position is contingent on the satisfactory completion of a background investigation; this position may require annual background investigations. Preferred Qualifications: 10+ years of Experience in major semiconductor manufacturer, a supplier to the semiconductor industry or similar industry, such as specialty gas/equipment supplier, pharmaceutical or medical device manufacturer desired. Additional Information: Benefits Medical, Vision, and Dental Competitive Pay and PTO Flexible Heath Spending and Dependent Care Accounts Basic / Optional Life Insurance Post-Retirement Health Insurance Employer contribution of 7% of earnings to a Basic Retirement plan after meeting one year of service. Optional employee contributed retirement account Location: 257 Fuller Road, Albany, NY 12203 Pay Rate: $36-$39/ hr Posted rate is dependent on education and experience. NOTE: Some positions require access to export-controlled commodities, technical data, technology, software, or restricted programs where U.S. Government authorization may be required. For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies. The decision to pursue an export license application is at The Research Foundation for SUNY's sole discretion. Proof of status may be required prior to employment in connection with necessary authorizations. Employment is with the Research Foundation for SUNY. The Research Foundation is an Equal Opportunity Employer, including individuals with disabilities and protected veterans. In compliance with the Americans with Disabilities Act (ADA), if you have a disability and require a reasonable accommodation to apply please call Human Resources at .
3094 McCullough Blvd, Belden, MS 38826 What's the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you'll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske-the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It's simple. Maybe you've always had an interest in vehicle maintenance but haven't had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you'll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It's about going above and beyond for our customers-the way Penske goes above and beyond for you. It's about building meaningful relationships. It's about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done • Helping make sure our facilities are clean, safe environments for our customers and associates • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training programs • Advanced vehicle maintenance technology • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred • Valid driver's license required • Excellent customer service and communication skills • The ability to work well as part of a team • The ability and willingness to work outside • Basic mechanical ability and tool usage (preferred) • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Pay : $17.75 Shift Differentials: Second shift start times after 11am are eligible for $2.00 per hour shift differential Third shift start time after 9pm are eligible for $3.00 per hour shift differential Hours : Tuesday-Saturday 7a-330p Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. To learn more visit Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 3094 Mccullough Blvd Primary Location: US-MS-Belden Employer: Penske Truck Leasing Co., L.P. Req ID:
09/08/2025
Full time
3094 McCullough Blvd, Belden, MS 38826 What's the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you'll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske-the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It's simple. Maybe you've always had an interest in vehicle maintenance but haven't had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you'll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It's about going above and beyond for our customers-the way Penske goes above and beyond for you. It's about building meaningful relationships. It's about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done • Helping make sure our facilities are clean, safe environments for our customers and associates • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training programs • Advanced vehicle maintenance technology • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred • Valid driver's license required • Excellent customer service and communication skills • The ability to work well as part of a team • The ability and willingness to work outside • Basic mechanical ability and tool usage (preferred) • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Pay : $17.75 Shift Differentials: Second shift start times after 11am are eligible for $2.00 per hour shift differential Third shift start time after 9pm are eligible for $3.00 per hour shift differential Hours : Tuesday-Saturday 7a-330p Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. To learn more visit Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 3094 Mccullough Blvd Primary Location: US-MS-Belden Employer: Penske Truck Leasing Co., L.P. Req ID:
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Salary Range: $ To $ Job Summary: The successful Maintenance Technician II will maintain farm equipment, structures, and facilities, including repairs, preventative maintenance and ensuring the smooth operation of the farm. All tasks will be performed while supporting the policies, goals and objectives of the company. Summary of essential job functions: Equipment Maintenance: Repair and Overhaul: Diagnosing, repairing, and overhauling farm machinery and vehicles, such as tractors, trailers, and irrigation systems. Preventative Maintenance: Performing routine maintenance tasks like lubrication, inspections, and cleaning to extend equipment lifespan and prevent breakdowns. Record Keeping: Maintaining accurate records of repairs and maintenance performed on equipment. Inventory Management: Ensuring adequate supplies and parts are available for repairs and maintenance. Facility Maintenance: Building Repairs: Making minor repairs to farm buildings, greenhouses, gates, and other structures. Electrical and Plumbing: Performing basic electrical and plumbing repairs. Irrigation Systems: Maintaining and repairing irrigation systems. Custodial Duties: Keeping the farm premises clean and organized. General Tasks: Operating Equipment: Operating farm machinery and tools safely and efficiently. Following Instructions: Following verbal and written instructions and directions. Working Independently: Performing duties effectively, timely, and without supervision. Safety: Ensuring a safe working environment by adhering to safety protocols and procedures. Minimum Requirements: At least 5 years experience or trade school training in electrical and mechanical repair Ability to read and interpret documents, schematics and drawings Ability to write detailed repair reports as well as good verbal communication Willing to work on a rotating weekend or on-call Able to climb ladders and work at elevations Clean criminal history and drug free. Must be in good physical condition and able to work outdoors for extended periods of time. Ability to demonstrate high ethical standards and set a positive example for crew members. Current first aid/CPR certification, or ability and willingness to obtain one. Abilities Required: Basic concepts about greenhouse operations, quality and productivity Good interpersonal communication, able to work well with others Manufacturing aptitude, Must be able to work as part of a team Willingness to work nights and/or weekends, hours will change based on business needs Able to work indoors, outdoors, in warehouse or greenhouse all seasons Able to lift up to 50 lbs and able to stand for prolonged periods of time Ability to take initiative and work with minimum supervision, Self motivated Ability to solve practical problems and deal with a variety of changing situations. Ability to tolerate exposure to greenhouse elements such as heat, cold, water and dirt. Bilingual English/Spanish helpful PIce1a5f5-
09/08/2025
Full time
Salary Range: $ To $ Job Summary: The successful Maintenance Technician II will maintain farm equipment, structures, and facilities, including repairs, preventative maintenance and ensuring the smooth operation of the farm. All tasks will be performed while supporting the policies, goals and objectives of the company. Summary of essential job functions: Equipment Maintenance: Repair and Overhaul: Diagnosing, repairing, and overhauling farm machinery and vehicles, such as tractors, trailers, and irrigation systems. Preventative Maintenance: Performing routine maintenance tasks like lubrication, inspections, and cleaning to extend equipment lifespan and prevent breakdowns. Record Keeping: Maintaining accurate records of repairs and maintenance performed on equipment. Inventory Management: Ensuring adequate supplies and parts are available for repairs and maintenance. Facility Maintenance: Building Repairs: Making minor repairs to farm buildings, greenhouses, gates, and other structures. Electrical and Plumbing: Performing basic electrical and plumbing repairs. Irrigation Systems: Maintaining and repairing irrigation systems. Custodial Duties: Keeping the farm premises clean and organized. General Tasks: Operating Equipment: Operating farm machinery and tools safely and efficiently. Following Instructions: Following verbal and written instructions and directions. Working Independently: Performing duties effectively, timely, and without supervision. Safety: Ensuring a safe working environment by adhering to safety protocols and procedures. Minimum Requirements: At least 5 years experience or trade school training in electrical and mechanical repair Ability to read and interpret documents, schematics and drawings Ability to write detailed repair reports as well as good verbal communication Willing to work on a rotating weekend or on-call Able to climb ladders and work at elevations Clean criminal history and drug free. Must be in good physical condition and able to work outdoors for extended periods of time. Ability to demonstrate high ethical standards and set a positive example for crew members. Current first aid/CPR certification, or ability and willingness to obtain one. Abilities Required: Basic concepts about greenhouse operations, quality and productivity Good interpersonal communication, able to work well with others Manufacturing aptitude, Must be able to work as part of a team Willingness to work nights and/or weekends, hours will change based on business needs Able to work indoors, outdoors, in warehouse or greenhouse all seasons Able to lift up to 50 lbs and able to stand for prolonged periods of time Ability to take initiative and work with minimum supervision, Self motivated Ability to solve practical problems and deal with a variety of changing situations. Ability to tolerate exposure to greenhouse elements such as heat, cold, water and dirt. Bilingual English/Spanish helpful PIce1a5f5-
UNIVERSAL CALIBRATION AND DIAGNOSTICS LLC
Bradenton, Florida
Description: We are looking for a highly skilled, highly motivated and professional install technician to join our American Glass Professionals team to travel, install and calibrate new windshields across the state of Florida Responsible for handling and replacing different types of auto glass while providing exceptional customer service during the install and calibration process. At American Glass Pros, we provide customers with a convenient, seamless solution for damaged auto-glass replacement, and pride ourselves in exceeding the expectations of our windshield companies and clients. Responsibilities Removing damaged auto glass from vehicles safely and efficiently, which can involve dismantling parts of the vehicle. Cleaning and preparing the vehicles frame or window area for installation to ensure proper adhesion and sealing. Installing new glass or windshield using appropriate tools and techniques to ensure proper fit and seal. Testing the installed glass to ensure it meets safety standards and functions correctly, such as verifying proper alignment and ensuring no leaks. Interacting with customers to explain the installation process, answer questions, and provide recommendations for care and maintenance of the newly installed glass. Adhering to safety protocols and guidelines throughout the installation process to protect both themselves and customers vehicles. Keeping tools, equipment, and work area clean and well-maintained to ensure optimal performance and safety. documenting work completed, including any issues encountered during the installation process and measures taken to resolve them. Staying informed about new technologies and techniques in auto glass installation to enhance skills and provide better service. Requirements: Must pay attention to detail and be able to prioritize. Technical school experience is preferred. Ability to lift heavy objects (up to 50 lbs) Previous experience in automotive repair Valid in-state driver's license and have/maintain an acceptable, safe diving record. Must be able to engage with clients in friendly professional manner. Must work well under pressure. Demonstrate behaviors consistent with our values, vision and mission in all interactions with customers and co-workers. Ability to handle high volume intake and work in a fast-paced environment. Experience: Glass installation: 2 Year Minimum Mechanical Experience preferred Customer service experience preferred Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Required to stand, walk, and sit; talk or hear, both in person and by telephone; use hands to finger, handle or feel objects or controls; reach with hands and arms. Regularly required to stoop, kneel, bend, crouch and lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Position Type/Expected Hours of Work: This is a full-time hourly position. Days and hours of work are generally Monday through Saturday, 7:00 a.m. to 5:00 p.m. This position regularly requires longer hours and weekend work. Travel: Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected. Work Authorization: Must possess and maintain a valid Driver's License. All offers of employment are contingent upon satisfactory results of a thorough background check and drug screen. Successful results of a background check are at the sole discretion of AGP. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Compensation details: 27-32 Hourly Wage PIc58e97e5-
09/08/2025
Full time
Description: We are looking for a highly skilled, highly motivated and professional install technician to join our American Glass Professionals team to travel, install and calibrate new windshields across the state of Florida Responsible for handling and replacing different types of auto glass while providing exceptional customer service during the install and calibration process. At American Glass Pros, we provide customers with a convenient, seamless solution for damaged auto-glass replacement, and pride ourselves in exceeding the expectations of our windshield companies and clients. Responsibilities Removing damaged auto glass from vehicles safely and efficiently, which can involve dismantling parts of the vehicle. Cleaning and preparing the vehicles frame or window area for installation to ensure proper adhesion and sealing. Installing new glass or windshield using appropriate tools and techniques to ensure proper fit and seal. Testing the installed glass to ensure it meets safety standards and functions correctly, such as verifying proper alignment and ensuring no leaks. Interacting with customers to explain the installation process, answer questions, and provide recommendations for care and maintenance of the newly installed glass. Adhering to safety protocols and guidelines throughout the installation process to protect both themselves and customers vehicles. Keeping tools, equipment, and work area clean and well-maintained to ensure optimal performance and safety. documenting work completed, including any issues encountered during the installation process and measures taken to resolve them. Staying informed about new technologies and techniques in auto glass installation to enhance skills and provide better service. Requirements: Must pay attention to detail and be able to prioritize. Technical school experience is preferred. Ability to lift heavy objects (up to 50 lbs) Previous experience in automotive repair Valid in-state driver's license and have/maintain an acceptable, safe diving record. Must be able to engage with clients in friendly professional manner. Must work well under pressure. Demonstrate behaviors consistent with our values, vision and mission in all interactions with customers and co-workers. Ability to handle high volume intake and work in a fast-paced environment. Experience: Glass installation: 2 Year Minimum Mechanical Experience preferred Customer service experience preferred Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Required to stand, walk, and sit; talk or hear, both in person and by telephone; use hands to finger, handle or feel objects or controls; reach with hands and arms. Regularly required to stoop, kneel, bend, crouch and lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Position Type/Expected Hours of Work: This is a full-time hourly position. Days and hours of work are generally Monday through Saturday, 7:00 a.m. to 5:00 p.m. This position regularly requires longer hours and weekend work. Travel: Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected. Work Authorization: Must possess and maintain a valid Driver's License. All offers of employment are contingent upon satisfactory results of a thorough background check and drug screen. Successful results of a background check are at the sole discretion of AGP. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Compensation details: 27-32 Hourly Wage PIc58e97e5-
Description: Join our Best-One of Indy team - now hiring at our Riley Park Tire location for our full-time Automotive Lube Technician position! Who We Are: Over the past 77 years, what started out as a single bay service station has grown into a respected tire and service company with over 285 locations in over 35 states - one of the largest independent tire companies in North America. At Best-One, we strive to be the leading the most trusted provider of tires and service in all of our markets with a mission for creating raving fans. And we know our success starts with our team members - our internal ravings fans. We're looking for an Automotive Lube Technician who places an emphasis on creating results for teammates, customers, and the company. What you get: Top Pay - the more you know, the more you earn Paid holidays & vacations; closed most major holidays Home on Sundays Health/dental/vision insurance 401(K) Team member discount program Continuing education/training Uniform Program and being a part of a company that offers a career, not just a job! What will you be doing as an Automotive Lube Technician? Provide general services for vehicle maintenance and repair, such as oil changes, tire rotation and replacement, etc. Assist fellow teammates in performing technical activities Minimize customer complaints through the provision of thorough yet time-effective repair services Ensure that shop equipment is maintained in top working condition, and adheres to shop safety and environmental practices Keep store management aware of mechanical repair problems as they occur Operate equipment and customer vehicles safely and responsibly Maintain strong communication between store teammates and all support departments Be familiar with, adhere to, and enforce company policies and procedures Adhere to legal guidelines, including such things as OSHA requirements What boxes do you have to check in order to join our team? At least 18 years of age Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling We offer a full work schedule Monday - Saturday (most locations close at 2pm on Saturday), and you'll be home on Sundays Employer is an Equal Opportunity & Drug-Free Employer Full-Time, Non-Exempt (Automotive Lube Technician up to $17/hr) Requirements: PIf01ccd9ccb98-8907
09/08/2025
Full time
Description: Join our Best-One of Indy team - now hiring at our Riley Park Tire location for our full-time Automotive Lube Technician position! Who We Are: Over the past 77 years, what started out as a single bay service station has grown into a respected tire and service company with over 285 locations in over 35 states - one of the largest independent tire companies in North America. At Best-One, we strive to be the leading the most trusted provider of tires and service in all of our markets with a mission for creating raving fans. And we know our success starts with our team members - our internal ravings fans. We're looking for an Automotive Lube Technician who places an emphasis on creating results for teammates, customers, and the company. What you get: Top Pay - the more you know, the more you earn Paid holidays & vacations; closed most major holidays Home on Sundays Health/dental/vision insurance 401(K) Team member discount program Continuing education/training Uniform Program and being a part of a company that offers a career, not just a job! What will you be doing as an Automotive Lube Technician? Provide general services for vehicle maintenance and repair, such as oil changes, tire rotation and replacement, etc. Assist fellow teammates in performing technical activities Minimize customer complaints through the provision of thorough yet time-effective repair services Ensure that shop equipment is maintained in top working condition, and adheres to shop safety and environmental practices Keep store management aware of mechanical repair problems as they occur Operate equipment and customer vehicles safely and responsibly Maintain strong communication between store teammates and all support departments Be familiar with, adhere to, and enforce company policies and procedures Adhere to legal guidelines, including such things as OSHA requirements What boxes do you have to check in order to join our team? At least 18 years of age Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling We offer a full work schedule Monday - Saturday (most locations close at 2pm on Saturday), and you'll be home on Sundays Employer is an Equal Opportunity & Drug-Free Employer Full-Time, Non-Exempt (Automotive Lube Technician up to $17/hr) Requirements: PIf01ccd9ccb98-8907
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking a Fire Inspector to join the team in Seattle, WA; Auburn, WA; Everett, WA; or Renton, WA. The Boeing Fire Department is the world's largest Industrial fire department. Boeing firefighters provide a safe working environment and are ready to respond to emergencies and disasters at our Boeing sites. The Boeing Puget Sound area has a diverse footprint with fire services supporting five sites. Auburn and Puyallup, Washington sites support fabrication. Everett, Washington hosts 747, 767, 777, & 787 aircraft production and customer delivery. Renton, Washington hosts 737 aircraft production while Seattle, Washington supports 737 deliveries and new aircraft derivative flight tests. Position Responsibilities: Conducts field inspections and applies command media to ensure compliance with fire protection requirements Monitors, enforces, and documents compliance with locally adopted fire code and associated local fire protection requirements/amendments References fire code relating to the inspection, testing, and maintenance of fire protection systems Implements Boeing policy, procedure, and practice relating to fire prevention Establishes national and local recognized fire prevention codes, standards, and applicable methods Coordinates, supervises and conducts (as appropriate) the inspection, maintenance and testing of the fire protection systems to meet the requirements under National Fire Protection Association (NFPA) 72 National Fire Alarm and Signaling Code, NFPA 25 Standard for Inspection, Testing, Maintenance of Water-Based Fire Protection Systems, and equivalent standards Identifies corrective actions to ensure that properties and systems comply with federal/ state laws, municipal ordinances, applicable fire codes, contractual requirements, Boeing policy, and industry standards Documents violations and corrective actions within computer-based tracking applications such as Emergency Reporting Follows up on violation resolution and corrective actions until closure with employees and first level management Keeps the Deputy Chief and Fire Prevention Captain (as appropriate) informed of all Fire Inspections and prevention activities Maintains all fire protection system Inspection, Test and Maintenance records for all system inspections in computer-based tracking software such as emergency reporting in accordance with the record retention schedule Witnesses the acceptance testing of fire protection systems in accordance with the relevant design standards as Boeing's Fire Protection representative Coordinates with Boeing Fire Protection Engineering as required to ensure appropriate site fire protection is maintained Performs reviews of operations, construction, and facility plans and drawings, relating to compliance with egress system design, portable fire extinguishers, emergency responder access, fire protection system naming and point identification, and general configuration of systems Reviews and compares new construction, including fire protection system modifications, with previously approved plans, identifying and resulting discrepancies, communicating discrepancies to the responsible organization, and following up to ensure discrepancies are resolved in accordance with the applicable codes, standards and the policies of the Authority Having Jurisdiction (AHJ) Participates and assists in all scheduled training requirements Provides fire prevention training and education to employees as needed to maintain Boeing's status as a fire prevention first department Coordinates with firefighters, site services, construction management, contractors and outside agencies in the performance of their duties Assists, responds and participates in emergency incidents at the site Prepares and submits fire and medical reports as required Performs other functions as necessary to achieve Fire Department requirements Responds to and supports all emergencies involving company personnel, buildings, equipment and vehicles Responds and advances medical care Executes Aircraft Rescue Firefighting (ARFF) Executes Confined Space Rescue Executes as a Hazardous Materials Technician Responds to service requests as outlined in company and administrative procedures Inspects fire department apparatus, fire protection systems and fire protection equipment related to department procedures Executes hot work control Participates in training activities and instruction sessions Conducts training in basic skills of a firefighter Conducts training for external customers in emergency preparedness and safety skills Monitors systems and receive requests for fire department services and dispatch resources appropriately Maintains required skills to ensure job proficiency Demonstrates proficiency in all firefighting techniques This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Current International Code Council (ICC), International Fire Services Accreditation Congress (IFSAC) and/or United States recognized Fire Inspector 1 certification Current valid driver's license and the ability to obtain a Washington State driver's license within 6 months of employment Current National Registry or Washington State Emergency Medical Technician (EMT) certification Ability to apply for reciprocity within 30 days of your start date and obtain reciprocity within 6 months of your start date Willing to travel domestically as needed Preferred Qualifications (Desired Skills/Experience): State, IFSAC or Pro Board Firefighter 2 certification Ability to become a Hazardous Materials Technician within 1 year of your hire date Ability to pass and maintain a Firefighter physical/stress test 3+ years of experience in emergency services 3+ years of experience with building and fire codes, modern fire prevention principles, procedures and equipment 3+ years of experience with the Microsoft Office suite including Word, Excel, PowerPoint, Access, and Project 3+ years of experience building relationships and partnering with all levels of employees, including executives 3+ years of experience applying risk management and mitigation principles 2 years of experience as a paid full-time Firefighter or any combination of 3 years of experience as a full-time, part time or volunteer Firefighter within the last 5 years Experience with aircraft rescue firefighting Experience with Security & Fire Protection or uniformed security policies, procedures, disciplines and requirements Union Representation: This is an hourly position represented by the International Association of Firefighters, Local I-66. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $37.00 - $49.23 Applications for this position will be accepted until Sept. 09, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
09/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking a Fire Inspector to join the team in Seattle, WA; Auburn, WA; Everett, WA; or Renton, WA. The Boeing Fire Department is the world's largest Industrial fire department. Boeing firefighters provide a safe working environment and are ready to respond to emergencies and disasters at our Boeing sites. The Boeing Puget Sound area has a diverse footprint with fire services supporting five sites. Auburn and Puyallup, Washington sites support fabrication. Everett, Washington hosts 747, 767, 777, & 787 aircraft production and customer delivery. Renton, Washington hosts 737 aircraft production while Seattle, Washington supports 737 deliveries and new aircraft derivative flight tests. Position Responsibilities: Conducts field inspections and applies command media to ensure compliance with fire protection requirements Monitors, enforces, and documents compliance with locally adopted fire code and associated local fire protection requirements/amendments References fire code relating to the inspection, testing, and maintenance of fire protection systems Implements Boeing policy, procedure, and practice relating to fire prevention Establishes national and local recognized fire prevention codes, standards, and applicable methods Coordinates, supervises and conducts (as appropriate) the inspection, maintenance and testing of the fire protection systems to meet the requirements under National Fire Protection Association (NFPA) 72 National Fire Alarm and Signaling Code, NFPA 25 Standard for Inspection, Testing, Maintenance of Water-Based Fire Protection Systems, and equivalent standards Identifies corrective actions to ensure that properties and systems comply with federal/ state laws, municipal ordinances, applicable fire codes, contractual requirements, Boeing policy, and industry standards Documents violations and corrective actions within computer-based tracking applications such as Emergency Reporting Follows up on violation resolution and corrective actions until closure with employees and first level management Keeps the Deputy Chief and Fire Prevention Captain (as appropriate) informed of all Fire Inspections and prevention activities Maintains all fire protection system Inspection, Test and Maintenance records for all system inspections in computer-based tracking software such as emergency reporting in accordance with the record retention schedule Witnesses the acceptance testing of fire protection systems in accordance with the relevant design standards as Boeing's Fire Protection representative Coordinates with Boeing Fire Protection Engineering as required to ensure appropriate site fire protection is maintained Performs reviews of operations, construction, and facility plans and drawings, relating to compliance with egress system design, portable fire extinguishers, emergency responder access, fire protection system naming and point identification, and general configuration of systems Reviews and compares new construction, including fire protection system modifications, with previously approved plans, identifying and resulting discrepancies, communicating discrepancies to the responsible organization, and following up to ensure discrepancies are resolved in accordance with the applicable codes, standards and the policies of the Authority Having Jurisdiction (AHJ) Participates and assists in all scheduled training requirements Provides fire prevention training and education to employees as needed to maintain Boeing's status as a fire prevention first department Coordinates with firefighters, site services, construction management, contractors and outside agencies in the performance of their duties Assists, responds and participates in emergency incidents at the site Prepares and submits fire and medical reports as required Performs other functions as necessary to achieve Fire Department requirements Responds to and supports all emergencies involving company personnel, buildings, equipment and vehicles Responds and advances medical care Executes Aircraft Rescue Firefighting (ARFF) Executes Confined Space Rescue Executes as a Hazardous Materials Technician Responds to service requests as outlined in company and administrative procedures Inspects fire department apparatus, fire protection systems and fire protection equipment related to department procedures Executes hot work control Participates in training activities and instruction sessions Conducts training in basic skills of a firefighter Conducts training for external customers in emergency preparedness and safety skills Monitors systems and receive requests for fire department services and dispatch resources appropriately Maintains required skills to ensure job proficiency Demonstrates proficiency in all firefighting techniques This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Current International Code Council (ICC), International Fire Services Accreditation Congress (IFSAC) and/or United States recognized Fire Inspector 1 certification Current valid driver's license and the ability to obtain a Washington State driver's license within 6 months of employment Current National Registry or Washington State Emergency Medical Technician (EMT) certification Ability to apply for reciprocity within 30 days of your start date and obtain reciprocity within 6 months of your start date Willing to travel domestically as needed Preferred Qualifications (Desired Skills/Experience): State, IFSAC or Pro Board Firefighter 2 certification Ability to become a Hazardous Materials Technician within 1 year of your hire date Ability to pass and maintain a Firefighter physical/stress test 3+ years of experience in emergency services 3+ years of experience with building and fire codes, modern fire prevention principles, procedures and equipment 3+ years of experience with the Microsoft Office suite including Word, Excel, PowerPoint, Access, and Project 3+ years of experience building relationships and partnering with all levels of employees, including executives 3+ years of experience applying risk management and mitigation principles 2 years of experience as a paid full-time Firefighter or any combination of 3 years of experience as a full-time, part time or volunteer Firefighter within the last 5 years Experience with aircraft rescue firefighting Experience with Security & Fire Protection or uniformed security policies, procedures, disciplines and requirements Union Representation: This is an hourly position represented by the International Association of Firefighters, Local I-66. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $37.00 - $49.23 Applications for this position will be accepted until Sept. 09, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Dollar General Fleet is Now Hiring Diesel Technicians Earn Up to $29.50/Hour - Comprehensive Benefits Package Paid Vacation & Holidays - Company-Provided Tools (Applicants must have at least 1 year of experience working on Class-A trucks.) Company Benefits: Earn up to $29.50/hour - paid out weekly Comprehensive benefits package Company-provided tools - no cost to you Paid vacation and holidays Newest technology & equipment And much more! ( Depending on location) Requirements: At least one (1) year of experience working on Class A trucks Experience working with air brakes, hydraulic & electrical systems. Prior welding and fabrication experience required Tire repair experience (repair, mounting, dismounting) preferred. Perform DOT inspections and compliancy Schedule Your Interview with Dollar General Fleet Today! Duties & Responsibilities: Diagnose and repair truck and trailer components such as doors, floors, side panels, electrical and air brake systems Perform preventive maintenance (PMs) on tractor and trailer equipment, including routine technical repairs and completing repair orders Perform maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, lift-gates, and any company-owned equipment Abide by all Company policies and safety rules and assist in maintaining a clean, safe work environment Assist drivers with addressing outstanding vehicle issues Maintain repairs for Class 8 trucks, trailers and yard tractors Safely operates gauges, forklifts, shunt trucks, torches, grinders, and various hand and power safety tools Get Started: STEP ONE: Request info by submitting this form STEP TWO: Schedule an interview with Dollar General Fleet STEP THREE: A Dollar General Fleet recruiter will connect with you to discuss our available opportunities & answer any questions you have. Schedule Your Interview with Dollar General Fleet Today!
09/08/2025
Full time
Dollar General Fleet is Now Hiring Diesel Technicians Earn Up to $29.50/Hour - Comprehensive Benefits Package Paid Vacation & Holidays - Company-Provided Tools (Applicants must have at least 1 year of experience working on Class-A trucks.) Company Benefits: Earn up to $29.50/hour - paid out weekly Comprehensive benefits package Company-provided tools - no cost to you Paid vacation and holidays Newest technology & equipment And much more! ( Depending on location) Requirements: At least one (1) year of experience working on Class A trucks Experience working with air brakes, hydraulic & electrical systems. Prior welding and fabrication experience required Tire repair experience (repair, mounting, dismounting) preferred. Perform DOT inspections and compliancy Schedule Your Interview with Dollar General Fleet Today! Duties & Responsibilities: Diagnose and repair truck and trailer components such as doors, floors, side panels, electrical and air brake systems Perform preventive maintenance (PMs) on tractor and trailer equipment, including routine technical repairs and completing repair orders Perform maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, lift-gates, and any company-owned equipment Abide by all Company policies and safety rules and assist in maintaining a clean, safe work environment Assist drivers with addressing outstanding vehicle issues Maintain repairs for Class 8 trucks, trailers and yard tractors Safely operates gauges, forklifts, shunt trucks, torches, grinders, and various hand and power safety tools Get Started: STEP ONE: Request info by submitting this form STEP TWO: Schedule an interview with Dollar General Fleet STEP THREE: A Dollar General Fleet recruiter will connect with you to discuss our available opportunities & answer any questions you have. Schedule Your Interview with Dollar General Fleet Today!
New Journey, a Genesis10 compmany, is actively seeking a resource for a full time, 3 month Contract position with potential for extension or conversion. Compensation: $36.00 per hour The main function of a facilities technician is to provide general maintenance support for the assigned buildings. Job Responsibilities: Monitor the facility to ensure that it remains safe, secure, and well-maintained. Troubleshoot power, HVAC system and controls, and mechanical systems. Maintain general & preventative maintenance, carpentry, plumbing systems, and vendor management. Replace lighting system bulbs and ballasts as needed. Move office furniture, machinery, equipment, and other materials, as requested. Required Qualifications: High school diploma or GED required 5-7 years of HVAC experience required Plumbing background would be nice as well Industrial/pharmaceutical background - this is not an office setting Interpersonal skills, attention to detail, and problem-solving skills. Basic ability to work independently and manage ones time. Basic knowledge of machines and tools, including their designs, uses, repair and maintenance. Only candidates available and ready to work directly as NJAI/Genesis10 employees will be considered for this position. If you have the described qualifications and are interested in this exciting opportunity, apply today! About New Journey/Genesis10: New Journey, a Genesis10 company, is a leader in staffing, providing opportunities in light industrial, finance/accounting, financial services, human resources, data, administrative, autonomous vehicles, business operations, and legal, amongst others. These opportunities provide professional growth with direct-hire, contract, & contract-to-hire roles at Fortune 1000 and mid-market companies. Benefits of working with New Journey include: Weekly pay Medical, Dental, Vision Behavioral Health Platform Health Savings Account Voluntary Term Life Insurance Voluntary Hospital Indemnity (Critical Illness & Accident) 401K Sick Pay (for applicable states/municipalities Commuter Benefits (Dallas, NYC, SF) Our team of experienced recruiters can help you find the ideal job to help you build your career. We care about people. We care about you. To learn more and to view all of our available career opportunities, please find us by searching New Journey is an Equal Opportunity Employer. Candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
09/08/2025
Full time
New Journey, a Genesis10 compmany, is actively seeking a resource for a full time, 3 month Contract position with potential for extension or conversion. Compensation: $36.00 per hour The main function of a facilities technician is to provide general maintenance support for the assigned buildings. Job Responsibilities: Monitor the facility to ensure that it remains safe, secure, and well-maintained. Troubleshoot power, HVAC system and controls, and mechanical systems. Maintain general & preventative maintenance, carpentry, plumbing systems, and vendor management. Replace lighting system bulbs and ballasts as needed. Move office furniture, machinery, equipment, and other materials, as requested. Required Qualifications: High school diploma or GED required 5-7 years of HVAC experience required Plumbing background would be nice as well Industrial/pharmaceutical background - this is not an office setting Interpersonal skills, attention to detail, and problem-solving skills. Basic ability to work independently and manage ones time. Basic knowledge of machines and tools, including their designs, uses, repair and maintenance. Only candidates available and ready to work directly as NJAI/Genesis10 employees will be considered for this position. If you have the described qualifications and are interested in this exciting opportunity, apply today! About New Journey/Genesis10: New Journey, a Genesis10 company, is a leader in staffing, providing opportunities in light industrial, finance/accounting, financial services, human resources, data, administrative, autonomous vehicles, business operations, and legal, amongst others. These opportunities provide professional growth with direct-hire, contract, & contract-to-hire roles at Fortune 1000 and mid-market companies. Benefits of working with New Journey include: Weekly pay Medical, Dental, Vision Behavioral Health Platform Health Savings Account Voluntary Term Life Insurance Voluntary Hospital Indemnity (Critical Illness & Accident) 401K Sick Pay (for applicable states/municipalities Commuter Benefits (Dallas, NYC, SF) Our team of experienced recruiters can help you find the ideal job to help you build your career. We care about people. We care about you. To learn more and to view all of our available career opportunities, please find us by searching New Journey is an Equal Opportunity Employer. Candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Description: Join our Best-One of Indy team - now hiring at our Best-One of Lafayette location for our full-time Automotive Lube Technician position! Who We Are: For the 3rd year, Best-One of Indy was recognized as one of the Best Places to Work in the tire industry by Tire Business . But that's not all - in 2024, Best-One of Indy was selected as Tire Review's Top Shop, further solidifying our reputation as a leader in the industry. This is not just a recognition; it's a testament to our commitment to our team members and the dynamic culture we foster. Are you ready to join a winning team? Apply today! Full-time: up to $17/hr What will you be doing as an Automotive Lube Technician? Provide general services for vehicle maintenance and repair, such as oil changes, tire rotation and replacement, etc. Assist fellow teammates in performing technical activities Minimize customer complaints through the provision of thorough yet time-effective repair services Ensure that shop equipment is maintained in top working condition, and adheres to shop safety and environmental practices Keep store management aware of mechanical repair problems as they occur Operate equipment and customer vehicles safely and responsibly Maintain strong communication between store teammates and all support departments Be familiar with, adhere to, and enforce company policies and procedures Adhere to legal guidelines, including such things as OSHA requirements What boxes do you have to check in order to join our team? At least 18 years of age Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling We offer a full work schedule Monday - Saturday (most locations close at 2pm on Saturday), and you'll be home on Sundays Employer is an Equal Opportunity & Drug-Free Employer Full-Time, Non-Exempt (Automotive Lube Technician up to $17/hr) Requirements: PI5-
09/08/2025
Full time
Description: Join our Best-One of Indy team - now hiring at our Best-One of Lafayette location for our full-time Automotive Lube Technician position! Who We Are: For the 3rd year, Best-One of Indy was recognized as one of the Best Places to Work in the tire industry by Tire Business . But that's not all - in 2024, Best-One of Indy was selected as Tire Review's Top Shop, further solidifying our reputation as a leader in the industry. This is not just a recognition; it's a testament to our commitment to our team members and the dynamic culture we foster. Are you ready to join a winning team? Apply today! Full-time: up to $17/hr What will you be doing as an Automotive Lube Technician? Provide general services for vehicle maintenance and repair, such as oil changes, tire rotation and replacement, etc. Assist fellow teammates in performing technical activities Minimize customer complaints through the provision of thorough yet time-effective repair services Ensure that shop equipment is maintained in top working condition, and adheres to shop safety and environmental practices Keep store management aware of mechanical repair problems as they occur Operate equipment and customer vehicles safely and responsibly Maintain strong communication between store teammates and all support departments Be familiar with, adhere to, and enforce company policies and procedures Adhere to legal guidelines, including such things as OSHA requirements What boxes do you have to check in order to join our team? At least 18 years of age Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling We offer a full work schedule Monday - Saturday (most locations close at 2pm on Saturday), and you'll be home on Sundays Employer is an Equal Opportunity & Drug-Free Employer Full-Time, Non-Exempt (Automotive Lube Technician up to $17/hr) Requirements: PI5-
Health Systems Management
Winston Salem, North Carolina
$2000.00 sign on bonus for CCHT (Certified Clinical Hemodialysis Technician) or Bonent CHT (Certified Hemodialysis Technologist/Technician) Certifications. Patient Care Technician (PCT) Patient Care Technicians (PCTs) at Health Systems Management support and work under the guidance of RNs to provide dialysis treatment to multiple patients at a time. PCTs have a combination of technical skills and compassion needed to improve the quality of life for our patients while promoting positive patient outcomes. Successful candidates will have the opportunity to learn the discipline of dialysis. To be considered for this position q ualified candidates are required to have a minimum of 6 months of healthcare and/or direct patient care experience. Good fit for those with - CHT, CCHT, CNA, CMA, PCA, CPT, CMA, EMT, CST, CPhT, etc. About Us: Health Systems Management, Inc. (HSM) is a full-service healthcare management organization providing a full range of development, management, and administrative services for dialysis facilities over the past 35 years in Georgia, South Carolina, and North Carolina. HSM has an outstanding reputation in the renal community for providing high quality patient care and encouraging physician input while maintaining efficient business operations. We are currently looking for compassionate, dedicated, and highly motivated PCTs to join our dialysis team. PCT Responsibilities and Physical Demands: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Set up of the hemodialysis machine. Greet patients and collect details regarding their previous treatment. Report any concerns or observations to the lead nurse. Assist with and prepare the patient's vascular access for treatment. Initiate, monitor, and discontinue dialysis treatment per written policies, procedures, and standards of care. Obtain patient's vital signs before, during, and after dialysis treatment and appropriately document in patient medical record. Responsible for appropriately calculating and documenting patient's fluid removal. PCT performs appropriate access cannulation and reports any difficulties or unusual findings to the lead nurse. Monitor the patient for any adverse reaction(s) and conduct appropriate intervention. Monitor the dialysis machine for any malfunction. Report any malfunctions to the lead nurse. Demonstrates knowledge of infection control as related to hand washing, personal protective equipment (PPE), and universal precautions. Maintain patient safety and comfort, which may include assisting with personal care needs and activities of daily living. Responds appropriately to emergency situations. Note you will have exposure to blood, needles, and various other bodily fluids. This position provides direct patient care that regularly involves heavy lifting, moving of patients, and assisting with ambulation. PCT will spend considerable time walking, bending, stretching, and standing. The employee may occasionally be required to move machines, equipment, and may lift chemical and water solutions of up to 30 pounds and high as five feet. You are required to acknowledge the inter-facility coverage policy that supports floating to various clinics during and after your training, if needed. PCT What You Can Expect: Improvement: HSM consistently strives to improve processes for our patients and teammates. Training: May take plate in a facility or a different clinic other than your assigned home clinic. Hours: Work hours may vary during the training period. However, you will typically work between 36-40 hours per week during training. Education Requirements and Position Qualifications: High School Diploma required. Basic computer knowledge required. 6 Months of healthcare and/or direct patient care experience is required. Continued employment is dependent on successful completion of the Health Systems Management training program in its entirety. The ability to work long hours is required. You could be on your feet for extended periods of time. Our day ends when patients care is completed. You must have a flexible schedule and be able to work mornings, evenings, weekends, and holidays. Must pass the Certified Clinical Hemodialysis Technician (CCHT) exam within 18 months following the first day of employment. Must have or obtain Basic Life Support certification approved by the American Heart Association Must be comfortable working around blood and needles, including cannulation, and obtaining labs. Excellent bedside manner and communication skills. Employee must successfully pass the Ishiharas Color Blind Test. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time . What HSM Provides: Extensive benefits package to include: Medical and Prescription Coverage Options Dental Vision Flexible Spending Account Short-Term and Long-Term Disability 401K with company match Paid Time Off: Start accruing time on your first day with the company. Paid Time Off Cash Out Two Times per Year. Tuition Reimbursement. Employee Assistance Program for: Family Resources, Counseling, Financial and Legal Guidance. Paid On the job training to help you develop your dialysis skills. The training is a combination of the classroom setting and direct patient care. Position ladders that provide transparent information on advancement opportunities in the role. Reimbursement: HSM will provide a one-time reimbursement to sit for your Certified Clinical Hemodialysis Technician (CCHT) exam. HSM, INC maintains a drug-free workplace in accordance with state and federal laws. Health Systems Management, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Compensation details: 17-27.5 Hourly Wage PIb15591b98b30-3325
09/08/2025
Full time
$2000.00 sign on bonus for CCHT (Certified Clinical Hemodialysis Technician) or Bonent CHT (Certified Hemodialysis Technologist/Technician) Certifications. Patient Care Technician (PCT) Patient Care Technicians (PCTs) at Health Systems Management support and work under the guidance of RNs to provide dialysis treatment to multiple patients at a time. PCTs have a combination of technical skills and compassion needed to improve the quality of life for our patients while promoting positive patient outcomes. Successful candidates will have the opportunity to learn the discipline of dialysis. To be considered for this position q ualified candidates are required to have a minimum of 6 months of healthcare and/or direct patient care experience. Good fit for those with - CHT, CCHT, CNA, CMA, PCA, CPT, CMA, EMT, CST, CPhT, etc. About Us: Health Systems Management, Inc. (HSM) is a full-service healthcare management organization providing a full range of development, management, and administrative services for dialysis facilities over the past 35 years in Georgia, South Carolina, and North Carolina. HSM has an outstanding reputation in the renal community for providing high quality patient care and encouraging physician input while maintaining efficient business operations. We are currently looking for compassionate, dedicated, and highly motivated PCTs to join our dialysis team. PCT Responsibilities and Physical Demands: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Set up of the hemodialysis machine. Greet patients and collect details regarding their previous treatment. Report any concerns or observations to the lead nurse. Assist with and prepare the patient's vascular access for treatment. Initiate, monitor, and discontinue dialysis treatment per written policies, procedures, and standards of care. Obtain patient's vital signs before, during, and after dialysis treatment and appropriately document in patient medical record. Responsible for appropriately calculating and documenting patient's fluid removal. PCT performs appropriate access cannulation and reports any difficulties or unusual findings to the lead nurse. Monitor the patient for any adverse reaction(s) and conduct appropriate intervention. Monitor the dialysis machine for any malfunction. Report any malfunctions to the lead nurse. Demonstrates knowledge of infection control as related to hand washing, personal protective equipment (PPE), and universal precautions. Maintain patient safety and comfort, which may include assisting with personal care needs and activities of daily living. Responds appropriately to emergency situations. Note you will have exposure to blood, needles, and various other bodily fluids. This position provides direct patient care that regularly involves heavy lifting, moving of patients, and assisting with ambulation. PCT will spend considerable time walking, bending, stretching, and standing. The employee may occasionally be required to move machines, equipment, and may lift chemical and water solutions of up to 30 pounds and high as five feet. You are required to acknowledge the inter-facility coverage policy that supports floating to various clinics during and after your training, if needed. PCT What You Can Expect: Improvement: HSM consistently strives to improve processes for our patients and teammates. Training: May take plate in a facility or a different clinic other than your assigned home clinic. Hours: Work hours may vary during the training period. However, you will typically work between 36-40 hours per week during training. Education Requirements and Position Qualifications: High School Diploma required. Basic computer knowledge required. 6 Months of healthcare and/or direct patient care experience is required. Continued employment is dependent on successful completion of the Health Systems Management training program in its entirety. The ability to work long hours is required. You could be on your feet for extended periods of time. Our day ends when patients care is completed. You must have a flexible schedule and be able to work mornings, evenings, weekends, and holidays. Must pass the Certified Clinical Hemodialysis Technician (CCHT) exam within 18 months following the first day of employment. Must have or obtain Basic Life Support certification approved by the American Heart Association Must be comfortable working around blood and needles, including cannulation, and obtaining labs. Excellent bedside manner and communication skills. Employee must successfully pass the Ishiharas Color Blind Test. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time . What HSM Provides: Extensive benefits package to include: Medical and Prescription Coverage Options Dental Vision Flexible Spending Account Short-Term and Long-Term Disability 401K with company match Paid Time Off: Start accruing time on your first day with the company. Paid Time Off Cash Out Two Times per Year. Tuition Reimbursement. Employee Assistance Program for: Family Resources, Counseling, Financial and Legal Guidance. Paid On the job training to help you develop your dialysis skills. The training is a combination of the classroom setting and direct patient care. Position ladders that provide transparent information on advancement opportunities in the role. Reimbursement: HSM will provide a one-time reimbursement to sit for your Certified Clinical Hemodialysis Technician (CCHT) exam. HSM, INC maintains a drug-free workplace in accordance with state and federal laws. Health Systems Management, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Compensation details: 17-27.5 Hourly Wage PIb15591b98b30-3325
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Levco Management LLC
University Of Richmond, Virginia
Description: About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management. Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part of our company's success is our employees, which is why we invest so much in our team members' success through comprehensive benefits, performance bonuses, team building events, and much more. Levco places a high priority on developing our employees and providing them with the support and resources they need to achieve personal goals, professional growth, and successful long-term careers with our company. We focus on building an inclusive, team-oriented culture of passionate and hard-working professionals. Growing together as a team provides our employees with a sense of camaraderie and rewarding professional opportunities that are unique to our company. We are looking for an upbeat, hard-working individual to join us in making a positive impact on the community. If you are customer-oriented, a team player, and are ready to make a difference, join the Levco team! Maintenance Technician Full Time: 40 hours/week Hourly: Compensation is commensurate with experience. FLSA Status: Non-Exempt Schedule: Monday - Friday, Saturdays as needed, on-call rotation as needed. Reports to: Maintenance Supervisor Discount: Up to 50% rent discount (restrictions apply) Job Description Levco Management is currently hiring a Maintenance Technician for a property located in Richmond, VA. We are seeking an individual with experience in the apartment industry who is dependable, hard-working, and interested in developing their technical skills. Qualifications 1 year of residential maintenance experience. General maintenance skills (electrical, plumbing, appliance repair, HVAC, carpentry, etc.). Must provide your own hand tools including handheld power tools. Must be able to lift at least 50 lbs regularly without assistance. EPA certification is required. Valid driver's license and reliable transportation are required. Must be able to pass a background check as well as a maintenance skills assessment. Responsibilities Complete apartment turnovers. General painting and drywall repairs. Complete service requests. Assist with preventative maintenance programs. Assist with grounds upkeep daily. Completing thorough inspections of the common areas on a regular basis. Any other duties as assigned by your supervisor Benefits PTO: 15 days after 90 days of employment (lump sum), increases with tenure Industry leading paid Holidays Generous housing discounts Health, vision, and dental insurance plans with employer contributions Employer covered group life insurance policy Voluntary life and accident insurance Short-term disability 401(k) Cell phone and mileage reimbursement $100 weekly on call bonus potential Quarterly bonus potential Levco Management is an Equal Opportunity Employer. Requirements: PIdf4b7e2acc00-0729
09/08/2025
Full time
Description: About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management. Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part of our company's success is our employees, which is why we invest so much in our team members' success through comprehensive benefits, performance bonuses, team building events, and much more. Levco places a high priority on developing our employees and providing them with the support and resources they need to achieve personal goals, professional growth, and successful long-term careers with our company. We focus on building an inclusive, team-oriented culture of passionate and hard-working professionals. Growing together as a team provides our employees with a sense of camaraderie and rewarding professional opportunities that are unique to our company. We are looking for an upbeat, hard-working individual to join us in making a positive impact on the community. If you are customer-oriented, a team player, and are ready to make a difference, join the Levco team! Maintenance Technician Full Time: 40 hours/week Hourly: Compensation is commensurate with experience. FLSA Status: Non-Exempt Schedule: Monday - Friday, Saturdays as needed, on-call rotation as needed. Reports to: Maintenance Supervisor Discount: Up to 50% rent discount (restrictions apply) Job Description Levco Management is currently hiring a Maintenance Technician for a property located in Richmond, VA. We are seeking an individual with experience in the apartment industry who is dependable, hard-working, and interested in developing their technical skills. Qualifications 1 year of residential maintenance experience. General maintenance skills (electrical, plumbing, appliance repair, HVAC, carpentry, etc.). Must provide your own hand tools including handheld power tools. Must be able to lift at least 50 lbs regularly without assistance. EPA certification is required. Valid driver's license and reliable transportation are required. Must be able to pass a background check as well as a maintenance skills assessment. Responsibilities Complete apartment turnovers. General painting and drywall repairs. Complete service requests. Assist with preventative maintenance programs. Assist with grounds upkeep daily. Completing thorough inspections of the common areas on a regular basis. Any other duties as assigned by your supervisor Benefits PTO: 15 days after 90 days of employment (lump sum), increases with tenure Industry leading paid Holidays Generous housing discounts Health, vision, and dental insurance plans with employer contributions Employer covered group life insurance policy Voluntary life and accident insurance Short-term disability 401(k) Cell phone and mileage reimbursement $100 weekly on call bonus potential Quarterly bonus potential Levco Management is an Equal Opportunity Employer. Requirements: PIdf4b7e2acc00-0729
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Location: Chardon , OH About Redwood: At Redwood Living, Inc. ("Redwood"), we believe our success is driven by the people who power us. We are proud to be a multi-state employer with a growing team of over 650 employees committed to building neighborhoods and careers that thrive. Our employees are passionate, talented, and empowered to make decisions that positively impact the lives of our residents. From on-site teams to corporate leadership, every Redwood team member plays a vital role in delivering exceptional experiences. We foster a culture rooted in integrity, open communication, and a commitment to exceeding expectations. As we continue to expand our footprint and grow our team, we seek individuals who share our values and are excited to contribute to a dynamic, forward-thinking organization. At Redwood, you'll find more than a job - you'll find a place to grow, lead, and make a difference. We live by eight core values that guide everything we do: • Do One Thing Really Well • Be Entrepreneurial • Serve Those You Lead • Deliver More Than Expected • Communicate Openly and Honestly • Instill Family and Team Spirit • Demonstrate Integrity and Authenticity • Be Nice and Have Fun Position Overview: Each Redwood Neighborhood has an Apartment Maintenance Technician whose primary responsibilities involve performing routine and general maintenance on the facilities, buildings, and equipment on site, plus performing certain groundskeeping tasks. Daily responsibilities include utilizing various power tools, completing unit turns, and troubleshooting appliances. An aspect of the Apartment Maintenance Technician role involves customer service and communication with both residents and fellow employees. This role will be expected to act as a Redwood ambassador and always provide a positive employee and resident experience. Service Technicians enter residents' homes to complete work orders and will be expected to handle repairs and communications in a manner that promotes the best possible experience for residents. Duties & Responsibilities: Maintain and repair facilities, buildings, and grounds as assigned through work orders Prepare vacated apartment homes for release quickly and professionally Complete minor plumbing, electrical, carpentry, painting, and drywall tasks Minor plumbing system repairs (clearing drains, toilet issues, repair/replace water heaters) Service kitchen appliances, washers, dryers, and garage issues when necessary Emergency maintenance as part of an on-call emergency schedule Follow safety standards at all times Snow removal All other related duties as assigned Required Qualifications: 1 year of general maintenance experience Valid driver's license High school diploma or equivalent Preferred Qualifications: HVAC Certification Exceptional customer service skills Apartment maintenance experience Ability to operate smartphone, tablet, and computers Physical Requirements: Ability to Lift up to 50 pounds frequently, lift up to 100 pounds occasionally. Ability to push/pull 25 pounds frequently, 50-100 pounds occasionally, with and without a dolly Ability to sit, stand, bend, kneel, twist, climb and walk frequently This position includes working at heights such as using ladders or step stools as needed Discover the amazing benefits and perks that Redwood Apartment Neighborhoods offers! Visit our website today to learn more and see why Redwood is a great place to work: Redwood Apartment Neighborhoods Employee Benefits & Perks Redwood Living, Inc. is an equal opportunity employer. Redwood strictly prohibits and does not tolerate illegal discrimination, and Redwood provides equal employment opportunities to employees and applicants without regard to race, color, religion, creed, national origin or ancestry, ethnicity, sex (including gender, pregnancy, sexual orientation, and gender identity), age, physical or mental disability, citizenship, past, current, or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state, or local law. PIac150f6b18bb-6519
09/08/2025
Full time
Location: Chardon , OH About Redwood: At Redwood Living, Inc. ("Redwood"), we believe our success is driven by the people who power us. We are proud to be a multi-state employer with a growing team of over 650 employees committed to building neighborhoods and careers that thrive. Our employees are passionate, talented, and empowered to make decisions that positively impact the lives of our residents. From on-site teams to corporate leadership, every Redwood team member plays a vital role in delivering exceptional experiences. We foster a culture rooted in integrity, open communication, and a commitment to exceeding expectations. As we continue to expand our footprint and grow our team, we seek individuals who share our values and are excited to contribute to a dynamic, forward-thinking organization. At Redwood, you'll find more than a job - you'll find a place to grow, lead, and make a difference. We live by eight core values that guide everything we do: • Do One Thing Really Well • Be Entrepreneurial • Serve Those You Lead • Deliver More Than Expected • Communicate Openly and Honestly • Instill Family and Team Spirit • Demonstrate Integrity and Authenticity • Be Nice and Have Fun Position Overview: Each Redwood Neighborhood has an Apartment Maintenance Technician whose primary responsibilities involve performing routine and general maintenance on the facilities, buildings, and equipment on site, plus performing certain groundskeeping tasks. Daily responsibilities include utilizing various power tools, completing unit turns, and troubleshooting appliances. An aspect of the Apartment Maintenance Technician role involves customer service and communication with both residents and fellow employees. This role will be expected to act as a Redwood ambassador and always provide a positive employee and resident experience. Service Technicians enter residents' homes to complete work orders and will be expected to handle repairs and communications in a manner that promotes the best possible experience for residents. Duties & Responsibilities: Maintain and repair facilities, buildings, and grounds as assigned through work orders Prepare vacated apartment homes for release quickly and professionally Complete minor plumbing, electrical, carpentry, painting, and drywall tasks Minor plumbing system repairs (clearing drains, toilet issues, repair/replace water heaters) Service kitchen appliances, washers, dryers, and garage issues when necessary Emergency maintenance as part of an on-call emergency schedule Follow safety standards at all times Snow removal All other related duties as assigned Required Qualifications: 1 year of general maintenance experience Valid driver's license High school diploma or equivalent Preferred Qualifications: HVAC Certification Exceptional customer service skills Apartment maintenance experience Ability to operate smartphone, tablet, and computers Physical Requirements: Ability to Lift up to 50 pounds frequently, lift up to 100 pounds occasionally. Ability to push/pull 25 pounds frequently, 50-100 pounds occasionally, with and without a dolly Ability to sit, stand, bend, kneel, twist, climb and walk frequently This position includes working at heights such as using ladders or step stools as needed Discover the amazing benefits and perks that Redwood Apartment Neighborhoods offers! Visit our website today to learn more and see why Redwood is a great place to work: Redwood Apartment Neighborhoods Employee Benefits & Perks Redwood Living, Inc. is an equal opportunity employer. Redwood strictly prohibits and does not tolerate illegal discrimination, and Redwood provides equal employment opportunities to employees and applicants without regard to race, color, religion, creed, national origin or ancestry, ethnicity, sex (including gender, pregnancy, sexual orientation, and gender identity), age, physical or mental disability, citizenship, past, current, or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state, or local law. PIac150f6b18bb-6519
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
09/08/2025
Full time
Wagstaff Description: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $26-$35 per hour, depending on experience As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Assists with the development, implementation and consistent application of Wagstaff's metrology program in collaboration with other departments throughout the production stream from design through manufacturing and inspection. Administers the consistent application of metrological concepts as defined in the ASME Y14.5 Dimension and Tolerancing standard. Work as a member of the Manufacturing Engineering team and in collaboration with Quality Assurance to develop design, manufacturing, inspection & calibration standards and methods associated with geometric form specifications (GD&T). Primary Job Responsibilities Assists with the development and maintenance of Wagstaff's metrology program Administers the implementation of the metrology program through the entire production stream including design, manufacturing, and inspection. Identifies sources of error contributing to uncertainty of results to determine reliability of measurement processes in quantitative terms. Redesigns or adjusts measurement processes as needed to minimize errors. Specifies measurement instrumentation needed to ensure effective inspections. Assists with developing calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements. Mentors and trains other employees to enhance CMM skills Communicates with engineering, manufacturing, quality assurance, and laboratory personnel in design, implementation, evaluation, and revision of geometric dimensions and tolerances. Advises others on methods of resolving measurement problems Responsible for writing, maintaining, and updating calibration documentation and inspection records. Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Assist in developing and providing training for Quality Assurance programs and processes Assist in statistical studies and analysis Other duties as assigned Requirements: Associate's Degree in Quality, Engineering, Mathematics, or equivalent experience Minimum of 4 years of experience in using CMM or PCMM equipment Preferred experience with Laser Tracker or Laser Scanning equipment Thorough understanding of Dimension and Tolerancing standard ASME Y14.5 Experience with PolyWorks inspection software Formal training, or equivalent knowledge and skills, in gauging and inspection methodology Effective verbal and written communication skills Ability to make effective decisions and presentations on complex manufacturing and inspection topics to technicians, engineers, managers, customers & suppliers. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22 PIf-3760
Maintenance Generalist I Rutland-VT-05701-United States Maintenance Generalist is responsible for performing a variety of skilled and semi-skilled tasks to ensure the smooth operation of the facilities at Rutland Regional Medical Center. This role involves working from oral and written instructions, work orders, drawings, and specifications to carry out maintenance tasks promptly, efficiently, and effectively. The Generalist plans, coordinates, and participates in maintenance activities independently and/or alongside other members of the maintenance team as assigned. May be assigned to perform routine maintenance duties associated with the operations of the hospital equipment and facilities. Licensed Electrician or certified HVAC Technician desired. Minimum Education High School diploma, vocational school education, or equivalent. Minimum Work Experience 1 year of related experience Required Licenses/Certifications Maintain valid Driver's license. MECH Certification (ASHE/AHA) preferred Required Skills, Knowledge, and Abilities Familiar with federal, state, and local rules and regulations regarding building maintenance and repair. Basic knowledge of plumbing, electrical, HVAC, and carpentry principles. Basic knowledge of maintenance practices and safety procedures. Basic knowledge of tools and equipment used in maintenance work Ability to troubleshoot and diagnose equipment issues Ability to perform basic repairs and maintenance tasks Ability to follow written and verbal instructions. Ability to work independently and as part of a team Ability to maintain a clean and organized work area. Ability to communicate effectively with patients, visitors, staff, and contractors/vendors. Ability to read and interpret blueprints, schematics and manufacturer's instructions. Pay Range: $21.47 - $31.80 PIf87a111a4b53-8789
09/08/2025
Full time
Maintenance Generalist I Rutland-VT-05701-United States Maintenance Generalist is responsible for performing a variety of skilled and semi-skilled tasks to ensure the smooth operation of the facilities at Rutland Regional Medical Center. This role involves working from oral and written instructions, work orders, drawings, and specifications to carry out maintenance tasks promptly, efficiently, and effectively. The Generalist plans, coordinates, and participates in maintenance activities independently and/or alongside other members of the maintenance team as assigned. May be assigned to perform routine maintenance duties associated with the operations of the hospital equipment and facilities. Licensed Electrician or certified HVAC Technician desired. Minimum Education High School diploma, vocational school education, or equivalent. Minimum Work Experience 1 year of related experience Required Licenses/Certifications Maintain valid Driver's license. MECH Certification (ASHE/AHA) preferred Required Skills, Knowledge, and Abilities Familiar with federal, state, and local rules and regulations regarding building maintenance and repair. Basic knowledge of plumbing, electrical, HVAC, and carpentry principles. Basic knowledge of maintenance practices and safety procedures. Basic knowledge of tools and equipment used in maintenance work Ability to troubleshoot and diagnose equipment issues Ability to perform basic repairs and maintenance tasks Ability to follow written and verbal instructions. Ability to work independently and as part of a team Ability to maintain a clean and organized work area. Ability to communicate effectively with patients, visitors, staff, and contractors/vendors. Ability to read and interpret blueprints, schematics and manufacturer's instructions. Pay Range: $21.47 - $31.80 PIf87a111a4b53-8789
Description: About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management. Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part of our company's success is our employees, which is why we invest so much in our team members' success through comprehensive benefits, performance bonuses, team building events, and much more. Levco places a high priority on developing our employees and providing them with the support and resources they need to achieve personal goals, professional growth, and successful long-term careers with our company. We focus on building an inclusive, team-oriented culture of passionate and hard-working professionals. Growing together as a team provides our employees with a sense of camaraderie and rewarding professional opportunities that are unique to our company. We are looking for an upbeat, hard-working individual to join us in making a positive impact on the community. If you are customer-oriented, a team player, and are ready to make a difference, join the Levco team! Maintenance Technician Full Time: 40 hours/week Hourly: $22.00 - $25.00 per hour, compensation is commensurate with experience. FLSA Status: Non-Exempt Schedule: Monday - Friday, Saturdays as needed, overtime may be required. Reports to: Maintenance Supervisor Sign On Bonus: $1,500 Job Description Levco Management is currently hiring a Maintenance Technician for a property located in North Chesterfield, VA. We are seeking an individual with experience in the apartment industry who is dependable, hard-working, and interested in developing their technical skills. Qualifications 1 year of residential maintenance experience General maintenance skills (electrical, plumbing, appliance repair, HVAC, carpentry, etc.) Must provide your own hand tools including handheld power tools EPA 608 certification required Must be able to lift at least 50 lbs regularly without assistance Valid driver's license and reliable transportation are required Must be able to pass a background check as well as a maintenance skills assessment Responsibilities Complete apartment turnovers General painting and drywall repairs Complete work orders Assist with preventative maintenance programs Assist with keeping grounds clean daily Completing thorough inspections of the common areas on a regular basis Any other duties your supervisor assigns to you Benefits PTO: 15 days after 90 days of employment (lump sum), increases with tenure Industry leading paid Holidays Generous housing discounts Health, vision, and dental insurance plans with employer contributions Employer covered group life insurance policy Voluntary life and accident insurance Short-term disability 401(k) Cell phone and mileage reimbursement $100 weekly on call bonus potential Quarterly bonus potential terms and conditions apply Levco Management is an Equal Opportunity Employer. Requirements: PI2076d318cc86-1989
09/08/2025
Full time
Description: About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management. Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part of our company's success is our employees, which is why we invest so much in our team members' success through comprehensive benefits, performance bonuses, team building events, and much more. Levco places a high priority on developing our employees and providing them with the support and resources they need to achieve personal goals, professional growth, and successful long-term careers with our company. We focus on building an inclusive, team-oriented culture of passionate and hard-working professionals. Growing together as a team provides our employees with a sense of camaraderie and rewarding professional opportunities that are unique to our company. We are looking for an upbeat, hard-working individual to join us in making a positive impact on the community. If you are customer-oriented, a team player, and are ready to make a difference, join the Levco team! Maintenance Technician Full Time: 40 hours/week Hourly: $22.00 - $25.00 per hour, compensation is commensurate with experience. FLSA Status: Non-Exempt Schedule: Monday - Friday, Saturdays as needed, overtime may be required. Reports to: Maintenance Supervisor Sign On Bonus: $1,500 Job Description Levco Management is currently hiring a Maintenance Technician for a property located in North Chesterfield, VA. We are seeking an individual with experience in the apartment industry who is dependable, hard-working, and interested in developing their technical skills. Qualifications 1 year of residential maintenance experience General maintenance skills (electrical, plumbing, appliance repair, HVAC, carpentry, etc.) Must provide your own hand tools including handheld power tools EPA 608 certification required Must be able to lift at least 50 lbs regularly without assistance Valid driver's license and reliable transportation are required Must be able to pass a background check as well as a maintenance skills assessment Responsibilities Complete apartment turnovers General painting and drywall repairs Complete work orders Assist with preventative maintenance programs Assist with keeping grounds clean daily Completing thorough inspections of the common areas on a regular basis Any other duties your supervisor assigns to you Benefits PTO: 15 days after 90 days of employment (lump sum), increases with tenure Industry leading paid Holidays Generous housing discounts Health, vision, and dental insurance plans with employer contributions Employer covered group life insurance policy Voluntary life and accident insurance Short-term disability 401(k) Cell phone and mileage reimbursement $100 weekly on call bonus potential Quarterly bonus potential terms and conditions apply Levco Management is an Equal Opportunity Employer. Requirements: PI2076d318cc86-1989
