Description: Property Maintenance Technician Our long-standing professional property management company is in search of well-rounded property maintenance technicians to become part of our team. Skills, Knowledge & Personal Ethics: A good general knowledge of appliance, plumbing, electrical, carpentry repairs, knowledge of safety procedures, safety minded, ability to work with reasonable deadlines, dependable, ability to accommodate a schedule of after hours and weekend emergencies as needed. Previous experience in at least three of the following would be an added benefit: plumbing, hot water tank repairs or replacement, heating/ac repair, plumbing, appliance repair, installation of windows and interior/exterior doors, vinyl and plank floor installation. Summary of Functions: Reports directly to the Site Manager. Some of the daily job functions will be diagnosing, repairing, or replacement of any parts, fixtures, systems, or equipment throughout the property during vacant turnovers and performing resident service requests. Job Duties & Responsibilities: Duties may include, but are not limited to: Diagnose and perform corrective repairs or replacement to all buildings, fixtures, and equipment in a safe and timely manner. Following up with the Site Manager regarding any incomplete service requests or assigned tasks. Accurately document completed daily work assignments. Create professional public relations with all residents, co-workers, vendors, and contractors. Perform make ready repairs to restore apartments back to move-in condition. Re-inspect apartment with a check list after the make ready has been completed to ensure the best quality of work was performed. Complete all preventive maintenance as assigned, while maintaining accurate records of completion, e.g., changing furnace filters and cleaning out dryer vents. Will need to help in moving, removing, or installing appliances e.g., refrigerators, stoves, dishwashers, hot water tank, furnaces, a/c units as needed. Help to maintain the exterior curb appeal of the property. Assist with leaf removal and fall clean up. Assist with snow and ice removal throughout the property. Perform inspection as directed by the Site Manager, i.e., proper operation of smoke and CO detectors, playground equipment, balconies, decks, hallways, and all other common areas. Communicate and coordinate all maintenance objectives with the Site Manager on a daily basis. Perform all work according to the safety standards of the company. Keep your work area in a clean and safe manner on a daily basis. PM21 Requirements: Job Requirements: Normal work hours are from 8:00a.m. to 4:30p.m Monday through Friday. May require shared rotation of 24-hour emergency call service. Overtime may be required for emergency situations. Willing and able to work in various conditions, heat, cold, and reasonable heights. Must have a current drivers license with reliable transportation. High school diploma, general education degree or a minimum of 3 years of property maintenance experience. Ability to lift and carry up to 50lbs without assistance. Ability to kneel, crouch, climb, crawl, use ladders to reach items in need of repair. Basic computer skills for maintenance and payroll programs. Must provide own tools to effectively complete assigned tasks. Compensation details: 19-21 Hourly Wage PI5d0f0c86cd37-0000
09/10/2025
Full time
Description: Property Maintenance Technician Our long-standing professional property management company is in search of well-rounded property maintenance technicians to become part of our team. Skills, Knowledge & Personal Ethics: A good general knowledge of appliance, plumbing, electrical, carpentry repairs, knowledge of safety procedures, safety minded, ability to work with reasonable deadlines, dependable, ability to accommodate a schedule of after hours and weekend emergencies as needed. Previous experience in at least three of the following would be an added benefit: plumbing, hot water tank repairs or replacement, heating/ac repair, plumbing, appliance repair, installation of windows and interior/exterior doors, vinyl and plank floor installation. Summary of Functions: Reports directly to the Site Manager. Some of the daily job functions will be diagnosing, repairing, or replacement of any parts, fixtures, systems, or equipment throughout the property during vacant turnovers and performing resident service requests. Job Duties & Responsibilities: Duties may include, but are not limited to: Diagnose and perform corrective repairs or replacement to all buildings, fixtures, and equipment in a safe and timely manner. Following up with the Site Manager regarding any incomplete service requests or assigned tasks. Accurately document completed daily work assignments. Create professional public relations with all residents, co-workers, vendors, and contractors. Perform make ready repairs to restore apartments back to move-in condition. Re-inspect apartment with a check list after the make ready has been completed to ensure the best quality of work was performed. Complete all preventive maintenance as assigned, while maintaining accurate records of completion, e.g., changing furnace filters and cleaning out dryer vents. Will need to help in moving, removing, or installing appliances e.g., refrigerators, stoves, dishwashers, hot water tank, furnaces, a/c units as needed. Help to maintain the exterior curb appeal of the property. Assist with leaf removal and fall clean up. Assist with snow and ice removal throughout the property. Perform inspection as directed by the Site Manager, i.e., proper operation of smoke and CO detectors, playground equipment, balconies, decks, hallways, and all other common areas. Communicate and coordinate all maintenance objectives with the Site Manager on a daily basis. Perform all work according to the safety standards of the company. Keep your work area in a clean and safe manner on a daily basis. PM21 Requirements: Job Requirements: Normal work hours are from 8:00a.m. to 4:30p.m Monday through Friday. May require shared rotation of 24-hour emergency call service. Overtime may be required for emergency situations. Willing and able to work in various conditions, heat, cold, and reasonable heights. Must have a current drivers license with reliable transportation. High school diploma, general education degree or a minimum of 3 years of property maintenance experience. Ability to lift and carry up to 50lbs without assistance. Ability to kneel, crouch, climb, crawl, use ladders to reach items in need of repair. Basic computer skills for maintenance and payroll programs. Must provide own tools to effectively complete assigned tasks. Compensation details: 19-21 Hourly Wage PI5d0f0c86cd37-0000
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
We are seeking a motivated and experienced Fire alarm technician to join our team in our Georgia office. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, life, etc New hires receive 15 days of PTO to start beginning January 1, prorated the first year based on hire date. PTO increases with years in service. Employees are paid for 10 company holidays. If you are ambitious and a self motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI36f59f2398f1-0711
09/10/2025
Full time
We are seeking a motivated and experienced Fire alarm technician to join our team in our Georgia office. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, life, etc New hires receive 15 days of PTO to start beginning January 1, prorated the first year based on hire date. PTO increases with years in service. Employees are paid for 10 company holidays. If you are ambitious and a self motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI36f59f2398f1-0711
Pay: up to $37-$42.21 per hour, based on experience 3rd Shift Sign on bonus for New Hires: up to $7,500 $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
09/10/2025
Full time
Pay: up to $37-$42.21 per hour, based on experience 3rd Shift Sign on bonus for New Hires: up to $7,500 $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Automation Technician I Location: Ft. Gordon, GA Work Location: On-site Department: Operations Reports To: Site Manager FLSA Status: Hourly About Dorsett Controls Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. The opportunity We are seeking a skilled Automation Technician to join our Georgia team. In this role, you will be responsible for testing, calibrating, and repairing a wide variety of electrical, mechanical, electromechanical, and electronic instruments and equipment. This position is critical in ensuring systems meet compliance standards, operate reliably, and support mission-critical operations. Responsibilities Respond promptly to trouble calls, including those outlined in UMCS Standard Operating Procedures, within the required priority time frames. Perform scheduled maintenance and emergency work orders on time, ensuring compliance with performance expectations. Plan testing and calibration sequences for instruments and equipment. Set up standard and specialized lab equipment to evaluate, calibrate, and test instruments. Disassemble instruments and inspect components for defects, ensuring parts meet specifications. Repair, align, balance, and replace component parts and circuitry as required. Reassemble, test, and calibrate instruments and equipment to ensure accuracy. Develop formulas and solutions for complex measurement and calibration challenges. Support compliance with government regulations by assisting with certifications, training, and system security requirements Qualifications Education/Experience: Associate's degree from a two-year college or technical school, or at least five (5) years of related experience and/or training; or an equivalent combination of education and experience. Licenses/Certifications: Valid Driver's License (required) HVAC Certification (preferred) OSHA Training (preferred) Benefits Medical, dental, vision, life insurance, EAP, FSA, HSA, LTD/STD insurance and wellness benefits. Opportunities for advancement and education reimbursement. Travel Requirements Minimal and local Why Dorsett Controls? At Dorsett Controls, we combine technical excellence with a people-first approach. You'll be part of a team that values innovation, integrity, and growth. We invest in our people and empower them to lead, learn, and contribute meaningfully to impactful projects across the organization. We offer competitive compensation, comprehensive benefits, and opportunities to advance within a company that values your expertise and vision. Dorsett Controls is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Compensation details: 28-33 PIee60f114ad0a-2012
09/10/2025
Full time
Automation Technician I Location: Ft. Gordon, GA Work Location: On-site Department: Operations Reports To: Site Manager FLSA Status: Hourly About Dorsett Controls Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. The opportunity We are seeking a skilled Automation Technician to join our Georgia team. In this role, you will be responsible for testing, calibrating, and repairing a wide variety of electrical, mechanical, electromechanical, and electronic instruments and equipment. This position is critical in ensuring systems meet compliance standards, operate reliably, and support mission-critical operations. Responsibilities Respond promptly to trouble calls, including those outlined in UMCS Standard Operating Procedures, within the required priority time frames. Perform scheduled maintenance and emergency work orders on time, ensuring compliance with performance expectations. Plan testing and calibration sequences for instruments and equipment. Set up standard and specialized lab equipment to evaluate, calibrate, and test instruments. Disassemble instruments and inspect components for defects, ensuring parts meet specifications. Repair, align, balance, and replace component parts and circuitry as required. Reassemble, test, and calibrate instruments and equipment to ensure accuracy. Develop formulas and solutions for complex measurement and calibration challenges. Support compliance with government regulations by assisting with certifications, training, and system security requirements Qualifications Education/Experience: Associate's degree from a two-year college or technical school, or at least five (5) years of related experience and/or training; or an equivalent combination of education and experience. Licenses/Certifications: Valid Driver's License (required) HVAC Certification (preferred) OSHA Training (preferred) Benefits Medical, dental, vision, life insurance, EAP, FSA, HSA, LTD/STD insurance and wellness benefits. Opportunities for advancement and education reimbursement. Travel Requirements Minimal and local Why Dorsett Controls? At Dorsett Controls, we combine technical excellence with a people-first approach. You'll be part of a team that values innovation, integrity, and growth. We invest in our people and empower them to lead, learn, and contribute meaningfully to impactful projects across the organization. We offer competitive compensation, comprehensive benefits, and opportunities to advance within a company that values your expertise and vision. Dorsett Controls is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Compensation details: 28-33 PIee60f114ad0a-2012
• Pay: $25.00 per hour based on experience • (3rd) Shift • Sign on bonus for New Hires: ($1500.00) • Shift Differential- $2 for 2nd shift- $3 for 3rd shift • $600.00 yearly Tool allowance • Annual Boot Allowance • Outstanding benefits - • Excellent full time career with a stable and growing company • Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
• Pay: $25.00 per hour based on experience • (3rd) Shift • Sign on bonus for New Hires: ($1500.00) • Shift Differential- $2 for 2nd shift- $3 for 3rd shift • $600.00 yearly Tool allowance • Annual Boot Allowance • Outstanding benefits - • Excellent full time career with a stable and growing company • Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Specialized Fire & Security Inc
Riverdale, New Jersey
We are seeking a motivated and experienced Fire Alarm Technician to join our team. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan and we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, etc New hires receive 15 days of PTO to start beginning January 1. Prorated prior to January 1. PTO increases with years in service. Employees are paid for 10 company holidays. If you are an ambitious and self-motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using Company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments based on rotational schedule The qualified candidate for a Fire Alarm Technician should possess the following requirements: Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent In English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Siemens Fire Alarm Equipment is a plus National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI30dfaec1c5-
09/10/2025
Full time
We are seeking a motivated and experienced Fire Alarm Technician to join our team. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan and we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, etc New hires receive 15 days of PTO to start beginning January 1. Prorated prior to January 1. PTO increases with years in service. Employees are paid for 10 company holidays. If you are an ambitious and self-motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using Company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments based on rotational schedule The qualified candidate for a Fire Alarm Technician should possess the following requirements: Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent In English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Siemens Fire Alarm Equipment is a plus National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI30dfaec1c5-
Description: Job Title: Residential Maintenance Technician Reports to: Property Manager / Regional Manager Job Overview: A Residential Maintenance Technician is responsible for maintaining and repairing the physical condition of residential properties, ensuring that all systems and equipment operate efficiently and safely. They work to resolve any issues or repairs related to the structure, utilities, and appliances within residential buildings. Key Responsibilities: General Maintenance and Repairs: Perform routine inspections and maintenance tasks for plumbing, electrical, heating, ventilation, air conditioning (HVAC), and other residential systems. Repair or replace faulty equipment, appliances, fixtures, and other systems. Troubleshoot issues with appliances, plumbing, electrical systems, or HVAC units and take corrective actions. Plumbing: Fix leaks, unclog drains, and repair or replace pipes and fixtures as necessary. Maintain water supply and sewage systems. Electrical: Repair or replace light fixtures, outlets, and circuit breakers. Diagnose electrical issues and ensure systems are up to code. HVAC Systems: Maintain and repair heating and cooling systems. Replace air filters, clean ducts, and ensure proper functionality of HVAC units. Carpentry and Minor Structural Work: Repair damaged walls, floors, and ceilings. Fix doors, windows, and locks. Customer Service: Communicate effectively with tenants to resolve maintenance concerns. Respond to work orders in a timely manner, ensuring tenant satisfaction. Preventative Maintenance: Schedule regular maintenance tasks to ensure that systems and appliances operate efficiently. Conduct inspections to identify potential issues before they become major problems. Inventory and Equipment Management: Maintain an inventory of tools, materials, and supplies. Order and stock necessary parts for repairs and maintenance tasks. Safety Compliance: Adhere to all safety protocols and regulations to ensure a safe work environment. Keep up to date with local building codes and regulations. PM21 Requirements: Required Skills and Qualifications: Experience: Previous experience in residential maintenance, construction, or a related field. Technical Skills: Knowledge of plumbing, electrical, HVAC systems, and general repair techniques. Problem-Solving: Ability to troubleshoot and resolve maintenance issues promptly. Physical Stamina: Ability to lift heavy objects, climb ladders, and perform manual labor tasks. Communication: Strong communication skills to interact with residents and management. Preferred Qualifications: Certification in HVAC, plumbing, or electrical work. Previous experience in a property management or maintenance role. Knowledge of local building codes and regulations. Working Conditions: Work Hours: May require evening or weekend hours depending on the urgency of maintenance requests. Physical Demands: The job may involve lifting, standing for extended periods, and working in various weather conditions. Teamwork: Job may involve helping the team in other areas like painting, cleaning, grounds work, snow removal, etc. Compensation details: 21-23 Hourly Wage PI0e7a118ce2cd-6573
09/10/2025
Full time
Description: Job Title: Residential Maintenance Technician Reports to: Property Manager / Regional Manager Job Overview: A Residential Maintenance Technician is responsible for maintaining and repairing the physical condition of residential properties, ensuring that all systems and equipment operate efficiently and safely. They work to resolve any issues or repairs related to the structure, utilities, and appliances within residential buildings. Key Responsibilities: General Maintenance and Repairs: Perform routine inspections and maintenance tasks for plumbing, electrical, heating, ventilation, air conditioning (HVAC), and other residential systems. Repair or replace faulty equipment, appliances, fixtures, and other systems. Troubleshoot issues with appliances, plumbing, electrical systems, or HVAC units and take corrective actions. Plumbing: Fix leaks, unclog drains, and repair or replace pipes and fixtures as necessary. Maintain water supply and sewage systems. Electrical: Repair or replace light fixtures, outlets, and circuit breakers. Diagnose electrical issues and ensure systems are up to code. HVAC Systems: Maintain and repair heating and cooling systems. Replace air filters, clean ducts, and ensure proper functionality of HVAC units. Carpentry and Minor Structural Work: Repair damaged walls, floors, and ceilings. Fix doors, windows, and locks. Customer Service: Communicate effectively with tenants to resolve maintenance concerns. Respond to work orders in a timely manner, ensuring tenant satisfaction. Preventative Maintenance: Schedule regular maintenance tasks to ensure that systems and appliances operate efficiently. Conduct inspections to identify potential issues before they become major problems. Inventory and Equipment Management: Maintain an inventory of tools, materials, and supplies. Order and stock necessary parts for repairs and maintenance tasks. Safety Compliance: Adhere to all safety protocols and regulations to ensure a safe work environment. Keep up to date with local building codes and regulations. PM21 Requirements: Required Skills and Qualifications: Experience: Previous experience in residential maintenance, construction, or a related field. Technical Skills: Knowledge of plumbing, electrical, HVAC systems, and general repair techniques. Problem-Solving: Ability to troubleshoot and resolve maintenance issues promptly. Physical Stamina: Ability to lift heavy objects, climb ladders, and perform manual labor tasks. Communication: Strong communication skills to interact with residents and management. Preferred Qualifications: Certification in HVAC, plumbing, or electrical work. Previous experience in a property management or maintenance role. Knowledge of local building codes and regulations. Working Conditions: Work Hours: May require evening or weekend hours depending on the urgency of maintenance requests. Physical Demands: The job may involve lifting, standing for extended periods, and working in various weather conditions. Teamwork: Job may involve helping the team in other areas like painting, cleaning, grounds work, snow removal, etc. Compensation details: 21-23 Hourly Wage PI0e7a118ce2cd-6573
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
We are seeking a motivated and experienced Fire Alarm Technician to join our team. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, etc New hires receive 15 days of PTO to start beginning January 1. Prorated prior to January 1. PTO increases with years in service. Employees are paid for 10 company holidays. If you are an ambitious and self-motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using Company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments based on rotational schedule Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PIc22b0ac759c3-7747
09/10/2025
Full time
We are seeking a motivated and experienced Fire Alarm Technician to join our team. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, etc New hires receive 15 days of PTO to start beginning January 1. Prorated prior to January 1. PTO increases with years in service. Employees are paid for 10 company holidays. If you are an ambitious and self-motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using Company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments based on rotational schedule Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements - Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PIc22b0ac759c3-7747
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: up to $25-$34.38 per hour, based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
Pay: up to $25-$34.38 per hour, based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Progressive Foam Technologies, Inc.
Beach City, Ohio
ELECTRICAL ENGINEER This is not just another engineering role, it's an opportunity to step into a mission-critical position where your expertise will directly shape the future of our growing company. Unlike many companies where key roles turn over suddenly, we've planned ahead: you'll be able to train with our incumbent Electrical Engineer for several months before their retirement, giving you the confidence and continuity needed to succeed. Position Overview: The Electrical Engineer plays a critical part in ensuring production reliability, driving process improvements, and leading technical initiatives that impact both current operations and future innovation. Working closely with the maintenance and engineering team, this position provides engineering and technical support for production equipment and operations. The Electrical Engineer will develop and implement cost-effective manufacturing processes, recommend and execute process improvements, and coordinate new or revised machinery launches. Essential Job Functions: Commitment to company core values (Integrity, Respect, Excellence, Service, Interdependence, Listening, Accountability) Design, develop, and validate electrical equipment, components, circuits, or systems to ensure performance, safety, and reliability standards are achieved Apply mathematical modeling, engineering analysis, and computer simulations to optimize designs Conduct research on new technologies to innovate and implement solutions that improve equipment reliability and efficiency Inspect and diagnose machine malfunctions, underperforming equipment, or inefficient processes Repair and/or replace defective parts or equipment; ensure machinery is maintained to proper standards Recommend and implement Preventative & Predictive Maintenance programs, lubrication schedules, and non-destructive testing practices Lead, mentor, and train Maintenance Technicians; fill in as needed to support maintenance team coverage Design, develop, test, and/or source tools, machinery, and equipment; prepare cost justifications for new investments Collaborate with vendors, contractors, and internal teams (purchasing, quality, safety, production, accounting, sales) to solve problems and drive improvements Manage maintenance and engineering projects, ensuring safety, budget, timeline, and scope requirements are met Maintain accurate logs of maintenance activities, parts usage, and equipment performance Support production launches of new or revised machinery; troubleshoot and resolve manufacturing/design issues Maintain a proactive "willingness-to-learn" mindset, continually developing technical skills, including PLC and advanced control systems Travel regularly between Beach City and Gnadenhutten facilities Requirements: Bachelor's degree in Engineering from an accredited institution 4+ years of relevant experience in manufacturing engineering, electrical engineering, or equivalent combination of education/experience Strong ability to read, analyze, and interpret complex documents, technical drawings, and blueprints Proficiency in CAD software and ability to access, modify, and program PLC systems Solid math and analytical skills, including applied algebra, statistics, and logical/scientific problem-solving Strong communication and interpersonal skills with ability to work effectively across teams and with vendors Experience in design, testing, and validation of electrical systems and components Willingness to work flexibly, including multiple shifts, overtime, and on-call support when required Willingness and ability to travel overnight domestically and internationally as business needs dictate Why Work at Progressive Foam? We are not perfect, but we take pride in creating a workplace where employees feel valued, supported, and empowered to grow. You'll find meaningful work, opportunities to advance, and a positive, team-driven culture that makes coming to work enjoyable. Oh and the benefits? They're some of the best you'll find! Medical Insurance (super low premiums - cut them in half with our Wellness Program) Employer-Contributed HSA FREE Dental Insurance for employees and dependents FREE Short-Term Disability FREE Life Insurance Vision Insurance 401(k) Retirement Plan with Immediate Company Match Profit Sharing Retirement Bonus ($1,000 per year of service) Long-Term Disability Paid Maternity & Paternity Leave Educational Assistance (we cover tuition beyond the cost of books) Vacation & Paid Time Off 10 Paid Holidays Monthly Lunch Allowance PI2800a60a213a-2203
09/10/2025
Full time
ELECTRICAL ENGINEER This is not just another engineering role, it's an opportunity to step into a mission-critical position where your expertise will directly shape the future of our growing company. Unlike many companies where key roles turn over suddenly, we've planned ahead: you'll be able to train with our incumbent Electrical Engineer for several months before their retirement, giving you the confidence and continuity needed to succeed. Position Overview: The Electrical Engineer plays a critical part in ensuring production reliability, driving process improvements, and leading technical initiatives that impact both current operations and future innovation. Working closely with the maintenance and engineering team, this position provides engineering and technical support for production equipment and operations. The Electrical Engineer will develop and implement cost-effective manufacturing processes, recommend and execute process improvements, and coordinate new or revised machinery launches. Essential Job Functions: Commitment to company core values (Integrity, Respect, Excellence, Service, Interdependence, Listening, Accountability) Design, develop, and validate electrical equipment, components, circuits, or systems to ensure performance, safety, and reliability standards are achieved Apply mathematical modeling, engineering analysis, and computer simulations to optimize designs Conduct research on new technologies to innovate and implement solutions that improve equipment reliability and efficiency Inspect and diagnose machine malfunctions, underperforming equipment, or inefficient processes Repair and/or replace defective parts or equipment; ensure machinery is maintained to proper standards Recommend and implement Preventative & Predictive Maintenance programs, lubrication schedules, and non-destructive testing practices Lead, mentor, and train Maintenance Technicians; fill in as needed to support maintenance team coverage Design, develop, test, and/or source tools, machinery, and equipment; prepare cost justifications for new investments Collaborate with vendors, contractors, and internal teams (purchasing, quality, safety, production, accounting, sales) to solve problems and drive improvements Manage maintenance and engineering projects, ensuring safety, budget, timeline, and scope requirements are met Maintain accurate logs of maintenance activities, parts usage, and equipment performance Support production launches of new or revised machinery; troubleshoot and resolve manufacturing/design issues Maintain a proactive "willingness-to-learn" mindset, continually developing technical skills, including PLC and advanced control systems Travel regularly between Beach City and Gnadenhutten facilities Requirements: Bachelor's degree in Engineering from an accredited institution 4+ years of relevant experience in manufacturing engineering, electrical engineering, or equivalent combination of education/experience Strong ability to read, analyze, and interpret complex documents, technical drawings, and blueprints Proficiency in CAD software and ability to access, modify, and program PLC systems Solid math and analytical skills, including applied algebra, statistics, and logical/scientific problem-solving Strong communication and interpersonal skills with ability to work effectively across teams and with vendors Experience in design, testing, and validation of electrical systems and components Willingness to work flexibly, including multiple shifts, overtime, and on-call support when required Willingness and ability to travel overnight domestically and internationally as business needs dictate Why Work at Progressive Foam? We are not perfect, but we take pride in creating a workplace where employees feel valued, supported, and empowered to grow. You'll find meaningful work, opportunities to advance, and a positive, team-driven culture that makes coming to work enjoyable. Oh and the benefits? They're some of the best you'll find! Medical Insurance (super low premiums - cut them in half with our Wellness Program) Employer-Contributed HSA FREE Dental Insurance for employees and dependents FREE Short-Term Disability FREE Life Insurance Vision Insurance 401(k) Retirement Plan with Immediate Company Match Profit Sharing Retirement Bonus ($1,000 per year of service) Long-Term Disability Paid Maternity & Paternity Leave Educational Assistance (we cover tuition beyond the cost of books) Vacation & Paid Time Off 10 Paid Holidays Monthly Lunch Allowance PI2800a60a213a-2203
Company Highlights: The Bright Hotel is reimagining hotel operations by leveraging a tech-forward approach to the guest experience. Our goal is to personalize the stay for each guest driving stellar satisfaction rates. We are currently building out a portfolio of hotels focused on health and wellness called Vitality Hotels. Perks: 100% company-paid premium for employee-only coverage on select Medical, Dental, and Vision Insurance plans401K program with up to a 4% match and full vesting from day oneGenerous Paid Time Off - 2 weeks annually to recharge and relaxFlexible Spending Account (FSA) & Health Savings Account (HSA) options for added financial flexibilityVoluntary Life Insurance to provide additional coverage for you and your loved ones Purpose of the Role: Dayton Vitality Hotel is looking for a polite, friendly and helpful Maintenance Technician to join our team! This role will be fully on-site and will report to the Chief Engineer. The position will be responsible for maintaining building, grounds, and physical location with particular attention towards safety, security and asset protection. Participates with the emergency response team for all facility issues. Responsibilities: Establishes schedules for, and oversees performance of all preventive maintenance activities Assists in the establishment and implementation of Life Safety and other emergency related procedures/training for all personnel while executing emergency procedures in accordance with hotel standards. Complies with required safety regulations and procedures Ensures and maintains records of all maintenance/repairs performed as required by company policy and/or legal mandate Verifies that all work is performed in a safe, efficient manner and that the quality of same meets standard Prepares for periodic, walk through/visual inspections of all property assets to determine condition, establish maintenance priorities and highlight need for improvement areas Establishes/compiles lists of future projects and priorities, for submission to leadership for review and approval Maintains open communications with all departments to ensure timely response to operational needs Maintains cleanliness and excellent condition of equipment and work area Complies with hotel standards, policies and rules including safety and recycling standards and remains current with hotel information and changes Other duties as assigned Qualifications, Skills, Abilities and Experience: Ability to promote and apply teamwork skills Ability to maintain a positive attitude with a "How can I help" approach Ability to work day shift with availability to work night shift as needed Ability to use hands to lift, carry, or pull objects that may be heavy Ability to understand simple instructions Strong customer service experience Technical Licenses/Certifications: HVAC, Electrical, Plumbing etc Physical Requirements: The physical demands described are representative of those that must be met by an incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions & physical demands of this role. Ability to speak and hear. Close and distance vision. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Continually works in normal office conditions and in close proximity to others. Additional physical, visual requirements and working conditions may include but are not limited to: Must be able to work nights as needed Identify and distinguish colors May work outdoor or in difficult weather conditions Stand for long periods of time Walk extended distances Lift/carry 25-100 lbs. Kneel and/or stoop repeatedly May come in contact with fumes or airborne particles May be exposed to toxic or caustic chemicals Minimum Qualifications: High School Diploma or equivalent Minimum of 4 years related hotel experience Prior related supervisor experience Basic computer skills Work day shift with ability to work nights as needed Ability to commute/relocate to property Must have valid state issued Driver's License Please note, due to the requirements of this position, responses may automatically disqualify you from moving forward in the application process. Please review minimum qualifications thoroughly before applying. Schedule / Travel Requirements: Various schedules may applySome Travel required for the position PIaa772eade5-
09/10/2025
Full time
Company Highlights: The Bright Hotel is reimagining hotel operations by leveraging a tech-forward approach to the guest experience. Our goal is to personalize the stay for each guest driving stellar satisfaction rates. We are currently building out a portfolio of hotels focused on health and wellness called Vitality Hotels. Perks: 100% company-paid premium for employee-only coverage on select Medical, Dental, and Vision Insurance plans401K program with up to a 4% match and full vesting from day oneGenerous Paid Time Off - 2 weeks annually to recharge and relaxFlexible Spending Account (FSA) & Health Savings Account (HSA) options for added financial flexibilityVoluntary Life Insurance to provide additional coverage for you and your loved ones Purpose of the Role: Dayton Vitality Hotel is looking for a polite, friendly and helpful Maintenance Technician to join our team! This role will be fully on-site and will report to the Chief Engineer. The position will be responsible for maintaining building, grounds, and physical location with particular attention towards safety, security and asset protection. Participates with the emergency response team for all facility issues. Responsibilities: Establishes schedules for, and oversees performance of all preventive maintenance activities Assists in the establishment and implementation of Life Safety and other emergency related procedures/training for all personnel while executing emergency procedures in accordance with hotel standards. Complies with required safety regulations and procedures Ensures and maintains records of all maintenance/repairs performed as required by company policy and/or legal mandate Verifies that all work is performed in a safe, efficient manner and that the quality of same meets standard Prepares for periodic, walk through/visual inspections of all property assets to determine condition, establish maintenance priorities and highlight need for improvement areas Establishes/compiles lists of future projects and priorities, for submission to leadership for review and approval Maintains open communications with all departments to ensure timely response to operational needs Maintains cleanliness and excellent condition of equipment and work area Complies with hotel standards, policies and rules including safety and recycling standards and remains current with hotel information and changes Other duties as assigned Qualifications, Skills, Abilities and Experience: Ability to promote and apply teamwork skills Ability to maintain a positive attitude with a "How can I help" approach Ability to work day shift with availability to work night shift as needed Ability to use hands to lift, carry, or pull objects that may be heavy Ability to understand simple instructions Strong customer service experience Technical Licenses/Certifications: HVAC, Electrical, Plumbing etc Physical Requirements: The physical demands described are representative of those that must be met by an incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions & physical demands of this role. Ability to speak and hear. Close and distance vision. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Continually works in normal office conditions and in close proximity to others. Additional physical, visual requirements and working conditions may include but are not limited to: Must be able to work nights as needed Identify and distinguish colors May work outdoor or in difficult weather conditions Stand for long periods of time Walk extended distances Lift/carry 25-100 lbs. Kneel and/or stoop repeatedly May come in contact with fumes or airborne particles May be exposed to toxic or caustic chemicals Minimum Qualifications: High School Diploma or equivalent Minimum of 4 years related hotel experience Prior related supervisor experience Basic computer skills Work day shift with ability to work nights as needed Ability to commute/relocate to property Must have valid state issued Driver's License Please note, due to the requirements of this position, responses may automatically disqualify you from moving forward in the application process. Please review minimum qualifications thoroughly before applying. Schedule / Travel Requirements: Various schedules may applySome Travel required for the position PIaa772eade5-
$27.60-$41.39 per hour based on experience 2nd shift available Sign on bonus for New Hires: up to $7,500 $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
09/10/2025
Full time
$27.60-$41.39 per hour based on experience 2nd shift available Sign on bonus for New Hires: up to $7,500 $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Master Diesel Technician needed Sign on bonus Up to $5,000 for new hires Shift Sunday - Thursday OR Tuesday - Saturday - 1 weekend day required. PAY: $32.00 $44.38 per hour based on experience and certifications $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
09/10/2025
Full time
Master Diesel Technician needed Sign on bonus Up to $5,000 for new hires Shift Sunday - Thursday OR Tuesday - Saturday - 1 weekend day required. PAY: $32.00 $44.38 per hour based on experience and certifications $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
About the Role: The Experienced Maintenance Technician with HVAC Certification plays a critical role in ensuring the optimal operation and upkeep of all mechanical, electrical, and HVAC systems within Lakeside Central Apartments. This position is responsible for performing routine maintenance, troubleshooting, and repairs to maintain a safe, comfortable, and efficient living environment for residents. The technician will proactively identify potential issues and implement preventative measures to reduce downtime and extend equipment lifespan. Collaboration with property management and vendors is essential to coordinate repairs and upgrades while minimizing disruption to residents. Ultimately, this role contributes significantly to the overall satisfaction and retention of tenants by maintaining high standards of facility functionality and safety. Maintenance Technician Minimum Qualifications: Valid HVAC certification recognized by the state of Florida. Strong problem-solving skills and the ability to work independently with minimal supervision. Maintenance Technician Preferred Qualifications: Previous experience working in apartment or property management settings. Basic knowledge of appliance repair and carpentry. Maintenance Technician Responsibilities: Perform routine inspections, maintenance, and repairs on HVAC systems, plumbing, electrical, and other mechanical equipment throughout the apartment complex. Diagnose and troubleshoot malfunctions or breakdowns promptly to restore systems to full operation. Maintain accurate records of maintenance activities, repairs, and parts inventory to ensure compliance and efficient workflow. Respond to resident maintenance requests in a timely and professional manner, providing clear communication and effective solutions. Coordinate with external contractors and vendors for specialized repairs or system upgrades as needed. Ensure all work complies with safety regulations, building codes, and company policies. Full-time Employee Benefits: • (3) Weeks PTO in 1st year (vacation and sick time) • 9 Paid Holidays • Birthday-PAID day off • Medical, Dental and Vision Benefits-1st of month following 60 days • Company Paid Short Term, Long Term Disability and Group Life Insurance • 401K + Match • Educational Reimbursement • Uniforms Provided • Competitive Salary w/ MONTHLY Bonus Potential • Housing Discount PId1b3a4f89f4e-9976
09/10/2025
Full time
About the Role: The Experienced Maintenance Technician with HVAC Certification plays a critical role in ensuring the optimal operation and upkeep of all mechanical, electrical, and HVAC systems within Lakeside Central Apartments. This position is responsible for performing routine maintenance, troubleshooting, and repairs to maintain a safe, comfortable, and efficient living environment for residents. The technician will proactively identify potential issues and implement preventative measures to reduce downtime and extend equipment lifespan. Collaboration with property management and vendors is essential to coordinate repairs and upgrades while minimizing disruption to residents. Ultimately, this role contributes significantly to the overall satisfaction and retention of tenants by maintaining high standards of facility functionality and safety. Maintenance Technician Minimum Qualifications: Valid HVAC certification recognized by the state of Florida. Strong problem-solving skills and the ability to work independently with minimal supervision. Maintenance Technician Preferred Qualifications: Previous experience working in apartment or property management settings. Basic knowledge of appliance repair and carpentry. Maintenance Technician Responsibilities: Perform routine inspections, maintenance, and repairs on HVAC systems, plumbing, electrical, and other mechanical equipment throughout the apartment complex. Diagnose and troubleshoot malfunctions or breakdowns promptly to restore systems to full operation. Maintain accurate records of maintenance activities, repairs, and parts inventory to ensure compliance and efficient workflow. Respond to resident maintenance requests in a timely and professional manner, providing clear communication and effective solutions. Coordinate with external contractors and vendors for specialized repairs or system upgrades as needed. Ensure all work complies with safety regulations, building codes, and company policies. Full-time Employee Benefits: • (3) Weeks PTO in 1st year (vacation and sick time) • 9 Paid Holidays • Birthday-PAID day off • Medical, Dental and Vision Benefits-1st of month following 60 days • Company Paid Short Term, Long Term Disability and Group Life Insurance • 401K + Match • Educational Reimbursement • Uniforms Provided • Competitive Salary w/ MONTHLY Bonus Potential • Housing Discount PId1b3a4f89f4e-9976
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2025
Full time
Pay: $22.93 - $34.38 per hour based on experience $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
