POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS - WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE - WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES - WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps - centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as - level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge "balance" tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA - WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required - arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI2071ee5-
09/08/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS - WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE - WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES - WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps - centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as - level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge "balance" tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA - WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required - arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI2071ee5-
Structural Foreman - 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports to: General Superintendent/Production Manager/Lead Structural Foreman Supervisory Responsibility: Structural Team Location: Jacksonville, FL - Normandy Campus Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective Exceptional experience in the direction and monitoring of structural fitters and structural welders. Proceed with the building of all structure related module assembly ready to ship and re-assemble. While under the direction of the Fabrication Superintendent, for the completion of Manufactured Chiller plants. Essential Functions Identify teams for crew structure. Verify the training level of crew members and seek training/qualifications as needed. Understand all standard operation procedures (SOP's), safety procedures, and production guidelines. Work hand in hand with the superintendent to meet any schedules or training. Monitor all tasks assigned and help verify critical layout and cuts to fit as needed to halt re-work. Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all "safety procedures." Seek to improve all operations to reduce man hours and improve safety. Work with the Engineering Department on solution and revisions See to all proper maintainance of machinery and equipment related to job completions. Meet the company needs as well as the customer needs. Use all resources to ensure the proper completion on all projects such as QAQC inspections, Superintendent approval utilizing Kaizan implementations always seeking improvements. Participate on daily turnover from 1st to 2nd shifts with detailed infromation both verbal and written. Monitor all materials used for individual projects to be sure it is correct. Monitor and maintain the entire Fab Shop with all activities. Ensure the proper loading of modules as the tractor trailer arrives after assisting the wrap team being sure that all modules are labeled with Company Logo, banners, and sign along with center of gravity stickers. Being part of the load out team, staying with it until the driver is safely on his way out. Monitor the proper staging of all structural assemblies and parts that are processed and staged according to requirements, placed in the appropriate laydown area. Maintain all laydowns areas and keep dunnage and debris to a minimum. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Team Builder / Leadership Attributes Reliable Attendance Strong Decision-Making Ability Excellent Communication Proficiency - Written and Verbal Ethical Conduct Problem Solving Exceptional Organizational Skills Attention to Detail - Thoroughness Time Management Supervisory Responsibility This position has supervisory responsibilities. Work Location This position will work out of our Manufacturing Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience. High school diploma or GED 3+ Years' experience in a role qualifying as Forman Position title 3+ Years' experience in Welding SMAW, FCAW, GMAW and GTAW, or a combination thereof OSHA-30 Preferred Education and Experience Bachelor's degree 2+ years vocational technical training Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Please note this job description is not designed to cover or contain a comprehensive listing of activities, Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. PIf23c563efd97-3090
09/07/2025
Full time
Structural Foreman - 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports to: General Superintendent/Production Manager/Lead Structural Foreman Supervisory Responsibility: Structural Team Location: Jacksonville, FL - Normandy Campus Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective Exceptional experience in the direction and monitoring of structural fitters and structural welders. Proceed with the building of all structure related module assembly ready to ship and re-assemble. While under the direction of the Fabrication Superintendent, for the completion of Manufactured Chiller plants. Essential Functions Identify teams for crew structure. Verify the training level of crew members and seek training/qualifications as needed. Understand all standard operation procedures (SOP's), safety procedures, and production guidelines. Work hand in hand with the superintendent to meet any schedules or training. Monitor all tasks assigned and help verify critical layout and cuts to fit as needed to halt re-work. Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all "safety procedures." Seek to improve all operations to reduce man hours and improve safety. Work with the Engineering Department on solution and revisions See to all proper maintainance of machinery and equipment related to job completions. Meet the company needs as well as the customer needs. Use all resources to ensure the proper completion on all projects such as QAQC inspections, Superintendent approval utilizing Kaizan implementations always seeking improvements. Participate on daily turnover from 1st to 2nd shifts with detailed infromation both verbal and written. Monitor all materials used for individual projects to be sure it is correct. Monitor and maintain the entire Fab Shop with all activities. Ensure the proper loading of modules as the tractor trailer arrives after assisting the wrap team being sure that all modules are labeled with Company Logo, banners, and sign along with center of gravity stickers. Being part of the load out team, staying with it until the driver is safely on his way out. Monitor the proper staging of all structural assemblies and parts that are processed and staged according to requirements, placed in the appropriate laydown area. Maintain all laydowns areas and keep dunnage and debris to a minimum. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Team Builder / Leadership Attributes Reliable Attendance Strong Decision-Making Ability Excellent Communication Proficiency - Written and Verbal Ethical Conduct Problem Solving Exceptional Organizational Skills Attention to Detail - Thoroughness Time Management Supervisory Responsibility This position has supervisory responsibilities. Work Location This position will work out of our Manufacturing Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience. High school diploma or GED 3+ Years' experience in a role qualifying as Forman Position title 3+ Years' experience in Welding SMAW, FCAW, GMAW and GTAW, or a combination thereof OSHA-30 Preferred Education and Experience Bachelor's degree 2+ years vocational technical training Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Please note this job description is not designed to cover or contain a comprehensive listing of activities, Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. PIf23c563efd97-3090
"A World of Opportunities" Committed to an industry that combines innovation and responsibility, we embody our slogan on a daily basis: "A World of Opportunities". Trust, Reputation, Integrity and Rise are strong values that make up Clayens' DNA! About the Role: We are looking for an experienced Shift Supervisor to oversee our production operations. Youll guarantee that manufacturing remains a smooth and efficient process by monitoring employees and organizing workflows. In a fast-paced environment like production, the supervisor is an integral part of the manufacturing process. They must be competent and comprehend complex operations. You should be able to optimize day-to-day activities while minimizing the costs. The goal is to ensure that production processes deliver products of maximum quality in a profitable manner. Responsibilities Supervises and coordinates activities of workers engaged in molding plastic products, applying knowledge of molding machine setup and operating techniques and production machining methods: Reads operating logs to identify inoperative molding machines, determines reasons for machine malfunction, and arranges for machine repair. Reviews production schedules and work orders, and assigns duties to workers according to order priorities. Studies quality control reports to identify product defects and directs machine operators to adjust machines to eliminate flaws. Examines molded products from each machine to verify conformance to specifications. Conducts or directs training of new employees in machine operation. Confers with management and other supervisors to resolve production problems. Ensures safety requirements are met by enforcing the use of personal protective equipment (i.e., safety glasses, etc.) and requiring team members to keep work areas clean and uncluttered. Other duties as assigned. Qualifications and Experience Minimum two years' technical in plastic injection molding required. Basic computer skills to enter data. High School or general education degree (GED) preferred. The ability to communicate and comprehend the English language, both verbally and written. The ability to work with coworkers in a team environment Must be motivated, detail oriented, and self-directed. Must be able to perform each essential duty satisfactorily with or without reasonable accommodations. Ability to work as a cooperative team player, treating all co-workers, customer, and suppliers with consideration and respect. Physical Requirements: Prolonged standing 8 12 hours. Ability to lift up to 50 pounds. Benefits Offered: Medical, Dental, Vision, Life Insurance, Long Term & Short Term Disability, Critical Care and Accident Coverage, Pet Insurance, Wellness Program, Vacation, Sick Time, 401K with Match,10 paid holidays and work/life balance plus much more! 1st Shift: 7a - 3p 2nd Shift: 3p - 11p 3rd Shift: 11p - 7a Monday - Friday Compensation details: 27-33 Hourly Wage PIe757dcf16c8f-1357
09/07/2025
Full time
"A World of Opportunities" Committed to an industry that combines innovation and responsibility, we embody our slogan on a daily basis: "A World of Opportunities". Trust, Reputation, Integrity and Rise are strong values that make up Clayens' DNA! About the Role: We are looking for an experienced Shift Supervisor to oversee our production operations. Youll guarantee that manufacturing remains a smooth and efficient process by monitoring employees and organizing workflows. In a fast-paced environment like production, the supervisor is an integral part of the manufacturing process. They must be competent and comprehend complex operations. You should be able to optimize day-to-day activities while minimizing the costs. The goal is to ensure that production processes deliver products of maximum quality in a profitable manner. Responsibilities Supervises and coordinates activities of workers engaged in molding plastic products, applying knowledge of molding machine setup and operating techniques and production machining methods: Reads operating logs to identify inoperative molding machines, determines reasons for machine malfunction, and arranges for machine repair. Reviews production schedules and work orders, and assigns duties to workers according to order priorities. Studies quality control reports to identify product defects and directs machine operators to adjust machines to eliminate flaws. Examines molded products from each machine to verify conformance to specifications. Conducts or directs training of new employees in machine operation. Confers with management and other supervisors to resolve production problems. Ensures safety requirements are met by enforcing the use of personal protective equipment (i.e., safety glasses, etc.) and requiring team members to keep work areas clean and uncluttered. Other duties as assigned. Qualifications and Experience Minimum two years' technical in plastic injection molding required. Basic computer skills to enter data. High School or general education degree (GED) preferred. The ability to communicate and comprehend the English language, both verbally and written. The ability to work with coworkers in a team environment Must be motivated, detail oriented, and self-directed. Must be able to perform each essential duty satisfactorily with or without reasonable accommodations. Ability to work as a cooperative team player, treating all co-workers, customer, and suppliers with consideration and respect. Physical Requirements: Prolonged standing 8 12 hours. Ability to lift up to 50 pounds. Benefits Offered: Medical, Dental, Vision, Life Insurance, Long Term & Short Term Disability, Critical Care and Accident Coverage, Pet Insurance, Wellness Program, Vacation, Sick Time, 401K with Match,10 paid holidays and work/life balance plus much more! 1st Shift: 7a - 3p 2nd Shift: 3p - 11p 3rd Shift: 11p - 7a Monday - Friday Compensation details: 27-33 Hourly Wage PIe757dcf16c8f-1357
Description: About Command Companies Command Companies is among the country's largest privately held printers and is comprised of closely held companies with common ownership, unionized workforces and strategic capabilities that serve clients in various industries. With nearly 1 million square feet of space across several facilities, Command Companies offers a robust set of print, mail and communications solutions that enable companies to connect with their audiences, stakeholders, members and other constituents across channels and devices, anytime and anywhere. Command Robbinsville is state-of-the-art book manufacturing facility, ideal for producing educational books, computer books, catalogs, annual reports, and directories. Command Robbinsville is seeking Industrial Electricians to join our growing Maintenance team! We have openings on 2nd shift (3 PM - 11 PM) and 3rd shift (11 PM - 7 AM). Overtime is available. The Industrial Electrician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment within the printing facility. This role ensures that presses, finishing equipment, material handling systems, and building electrical infrastructure operate safely and efficiently to support production schedules. Responsibilities: Install, maintain, and repair electrical systems, equipment, and controls used in printing and finishing operations. Troubleshoot electrical and electronic issues on presses, conveyors, motors, drives, PLCs, and control panels. Perform preventive maintenance and inspections to reduce downtime and extend equipment life. Read and interpret blueprints, wiring diagrams, and schematics to diagnose and resolve issues. Ensure compliance with National Electrical Code (NEC), OSHA, and facility safety standards. Maintain accurate records of maintenance, repairs, and parts usage. Collaborate with production supervisors, machine operators, and maintenance team members to resolve technical problems quickly. Support facility projects including equipment installations, upgrades, and plant electrical improvements. Assist with maintaining backup power systems, lighting, and energy management controls. Participate in continuous improvement and energy efficiency initiatives. Other job related duties as assigned. Requirements: Qualifications: High school diploma or equivalent required; completion of a certified electrician apprenticeship program preferred. State-issued Journeyman or Master Electrician license (as required by local jurisdiction). Minimum 3-5 years of experience within a printing facility, manufacturing, or heavy industrial environment. Strong knowledge of electrical systems, PLCs, motors, VFDs, control systems, and instrumentation. Ability to read and interpret technical drawings and manuals. Familiarity with safety protocols, lockout/tagout procedures, and industrial electrical codes. Strong troubleshooting and problem-solving skills. Ability to work independently and as part of a team in a fast-paced production setting. Physical ability to stand, bend, and lift up to 50 lbs. Work Environment: Manufacturing/printing facility with exposure to noise, ink/chemicals, and moving machinery. May require overtime, weekends, and on-call availability depending on production needs. Command Robbinsville is proud to offer competitive pay and great benefits! Medical, dental, vision coverage Company-paid life insurance Voluntary long-term disability coverage Paid time off Company paid holidays 401(k) with company match Employee Assistance Program Employee recognition programs And more! By joining the Command Robbinsville team, you will become part of one of the most exciting teams in the manufacturing industry. If you are looking for a great career that provides job satisfaction and professional advancement with a company that values YOU, join our team today! As an EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER, Command Companies and its affiliates do not discriminate against applicants or employees because of their race, color citizenship status, national origin, ancestry, gender (except where gender is a bonafide occupational qualification), sexual orientation, age, religion, creed, marital status, veteran status, domestic violence victim status, political affiliation or any other factor protected by federal, state or local law. PIde85c1fc6e92-4147
09/06/2025
Full time
Description: About Command Companies Command Companies is among the country's largest privately held printers and is comprised of closely held companies with common ownership, unionized workforces and strategic capabilities that serve clients in various industries. With nearly 1 million square feet of space across several facilities, Command Companies offers a robust set of print, mail and communications solutions that enable companies to connect with their audiences, stakeholders, members and other constituents across channels and devices, anytime and anywhere. Command Robbinsville is state-of-the-art book manufacturing facility, ideal for producing educational books, computer books, catalogs, annual reports, and directories. Command Robbinsville is seeking Industrial Electricians to join our growing Maintenance team! We have openings on 2nd shift (3 PM - 11 PM) and 3rd shift (11 PM - 7 AM). Overtime is available. The Industrial Electrician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment within the printing facility. This role ensures that presses, finishing equipment, material handling systems, and building electrical infrastructure operate safely and efficiently to support production schedules. Responsibilities: Install, maintain, and repair electrical systems, equipment, and controls used in printing and finishing operations. Troubleshoot electrical and electronic issues on presses, conveyors, motors, drives, PLCs, and control panels. Perform preventive maintenance and inspections to reduce downtime and extend equipment life. Read and interpret blueprints, wiring diagrams, and schematics to diagnose and resolve issues. Ensure compliance with National Electrical Code (NEC), OSHA, and facility safety standards. Maintain accurate records of maintenance, repairs, and parts usage. Collaborate with production supervisors, machine operators, and maintenance team members to resolve technical problems quickly. Support facility projects including equipment installations, upgrades, and plant electrical improvements. Assist with maintaining backup power systems, lighting, and energy management controls. Participate in continuous improvement and energy efficiency initiatives. Other job related duties as assigned. Requirements: Qualifications: High school diploma or equivalent required; completion of a certified electrician apprenticeship program preferred. State-issued Journeyman or Master Electrician license (as required by local jurisdiction). Minimum 3-5 years of experience within a printing facility, manufacturing, or heavy industrial environment. Strong knowledge of electrical systems, PLCs, motors, VFDs, control systems, and instrumentation. Ability to read and interpret technical drawings and manuals. Familiarity with safety protocols, lockout/tagout procedures, and industrial electrical codes. Strong troubleshooting and problem-solving skills. Ability to work independently and as part of a team in a fast-paced production setting. Physical ability to stand, bend, and lift up to 50 lbs. Work Environment: Manufacturing/printing facility with exposure to noise, ink/chemicals, and moving machinery. May require overtime, weekends, and on-call availability depending on production needs. Command Robbinsville is proud to offer competitive pay and great benefits! Medical, dental, vision coverage Company-paid life insurance Voluntary long-term disability coverage Paid time off Company paid holidays 401(k) with company match Employee Assistance Program Employee recognition programs And more! By joining the Command Robbinsville team, you will become part of one of the most exciting teams in the manufacturing industry. If you are looking for a great career that provides job satisfaction and professional advancement with a company that values YOU, join our team today! As an EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER, Command Companies and its affiliates do not discriminate against applicants or employees because of their race, color citizenship status, national origin, ancestry, gender (except where gender is a bonafide occupational qualification), sexual orientation, age, religion, creed, marital status, veteran status, domestic violence victim status, political affiliation or any other factor protected by federal, state or local law. PIde85c1fc6e92-4147
IMP Foreman Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Manager / IMP Superintendent Supervisory Responsibility: IMP Team Location: Jacksonville, FL ( Normandy Campus, West Jacksonville ) Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective Exceptional experience in the direction and monitoring of Insulated Metal Panel installers. Proceed with the building of all structure related module assembly ready to ship and re-assemble. While under the direction of the IMP Superintendent, for the completion of Manufactured Chiller plants. Company Benefits Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off. 10-Paid holidays a year. Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, annually. Baileys Gym Membership Tuition Assistance 2nd Shift Differential 10% Essential Functions Identify teams for crew structure. Verify the training level of crew members and seek training/qualifications as needed. Understand all standard operation procedures (SOP's), safety procedures, and production guidelines. Work hand in hand with the superintendent to meet any schedules or training. Monitor all tasks assigned and help verify critical layout and cuts to fit as needed to halt re-work. Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all "safety procedures." Seek to improve all operations to reduce man hours and improve safety. Work with the Engineering Department on solution and revisions See to all proper maintenance of machinery and equipment related to job completions. Meet the company needs as well as the customer needs. Use all resources to ensure the proper completion on all projects such as QAQC inspections, Superintendent approval utilizing Kaizan implementations always seeking improvements. Participate on daily turnover from 1st to 2nd shifts with detailed information both verbal and written. Monitor all materials used for individual projects to be sure it is correct. Monitor and maintain the entire Fab Shop with all activities. Ensure the proper loading of modules as the tractor trailer arrives after assisting the wrap team being sure that all modules are labeled with Company Logo, banners, and sign along with center of gravity stickers. Being part of the load out team, staying with it until the driver is safely on his way out. Monitor the proper staging of all structural assemblies and parts that are processed and staged according to requirements, placed in the appropriate laydown area. Maintain all laydowns areas and keep dunnage and debris to a minimum. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Team Builder / Leadership Attributes Reliable Attendance Strong Decision-Making Ability Excellent Communication Proficiency - Written and Verbal Ethical Conduct Problem Solving Exceptional Organizational Skills Attention to Detail - Thoroughness Time Management Safety Sheet Metal Blueprint Supervisory Responsibility This position has supervisory responsibilities. Work Location This position will work out of our Manufacturing Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience. High school diploma or GED 5+ Years' experience in sheet metal trade with 5+ Years' as qualifying Foreman Position title 3+ Years' experience in Insulated Metal Panels OSHA-30 Preferred Education and Experience Bachelor's degree 2+ years vocational technical training Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Please note this job description is not designed to cover or contain a comprehensive listing of activities, Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. PI76728d96d5-
09/05/2025
Full time
IMP Foreman Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Manager / IMP Superintendent Supervisory Responsibility: IMP Team Location: Jacksonville, FL ( Normandy Campus, West Jacksonville ) Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective Exceptional experience in the direction and monitoring of Insulated Metal Panel installers. Proceed with the building of all structure related module assembly ready to ship and re-assemble. While under the direction of the IMP Superintendent, for the completion of Manufactured Chiller plants. Company Benefits Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off. 10-Paid holidays a year. Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, annually. Baileys Gym Membership Tuition Assistance 2nd Shift Differential 10% Essential Functions Identify teams for crew structure. Verify the training level of crew members and seek training/qualifications as needed. Understand all standard operation procedures (SOP's), safety procedures, and production guidelines. Work hand in hand with the superintendent to meet any schedules or training. Monitor all tasks assigned and help verify critical layout and cuts to fit as needed to halt re-work. Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all "safety procedures." Seek to improve all operations to reduce man hours and improve safety. Work with the Engineering Department on solution and revisions See to all proper maintenance of machinery and equipment related to job completions. Meet the company needs as well as the customer needs. Use all resources to ensure the proper completion on all projects such as QAQC inspections, Superintendent approval utilizing Kaizan implementations always seeking improvements. Participate on daily turnover from 1st to 2nd shifts with detailed information both verbal and written. Monitor all materials used for individual projects to be sure it is correct. Monitor and maintain the entire Fab Shop with all activities. Ensure the proper loading of modules as the tractor trailer arrives after assisting the wrap team being sure that all modules are labeled with Company Logo, banners, and sign along with center of gravity stickers. Being part of the load out team, staying with it until the driver is safely on his way out. Monitor the proper staging of all structural assemblies and parts that are processed and staged according to requirements, placed in the appropriate laydown area. Maintain all laydowns areas and keep dunnage and debris to a minimum. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Team Builder / Leadership Attributes Reliable Attendance Strong Decision-Making Ability Excellent Communication Proficiency - Written and Verbal Ethical Conduct Problem Solving Exceptional Organizational Skills Attention to Detail - Thoroughness Time Management Safety Sheet Metal Blueprint Supervisory Responsibility This position has supervisory responsibilities. Work Location This position will work out of our Manufacturing Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience. High school diploma or GED 5+ Years' experience in sheet metal trade with 5+ Years' as qualifying Foreman Position title 3+ Years' experience in Insulated Metal Panels OSHA-30 Preferred Education and Experience Bachelor's degree 2+ years vocational technical training Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Please note this job description is not designed to cover or contain a comprehensive listing of activities, Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. PI76728d96d5-
OUR COMPANY AmeriBolt, founded in 2005, focuses on providing exceptional service to fastener distributors in the Southeast and Gulf Coast regions. Built on a foundation of speed and customer service, AmeriBolt has expanded its capacity while maintaining a commitment to superior service from quotation to delivery. As part of the LoneStar Group, AmeriBolt benefits from LoneStar's global manufacturing capabilities and customer approvals. Together, they offer enhanced value and diversified products to customers. LoneStar is a global leader in high-performance fasteners, gaskets, and flow-control components, serving industries like oil and gas and power generation, with operations across multiple regions. OUR BENEFITS Our Benefits include: Medical Insurance, Dental Insurance, Vision Insurance, Life Insurance, Short Term, and accident insurance. We also offer 401(k) with matching contributions, Flexible Paid Time Off (PTO), Paid Holidays, and the opportunity to be part of a dedicated and reliable team. ESSENTIAL FUNCTIONS AmeriBolt is seeking an experienced and motivated Maintenance Technician to join our growing team! If you're looking for a hands-on role in a fast-paced manufacturing environment-with competitive pay and the opportunity to work with advanced equipment-this is the position for you. We have 1 immediate opening in our Maintenance Department on 2nd shift. The Maintenance Technician is responsible for the routine operation and maintenance of mechanical, pneumatic, hydraulic, ventilation, and electrical systems and devices. Conduct preventative maintenance on manufacturing equipment and facilities, performing repairs and upgrades as necessary, and implementing new equipment and technologies. The role involves working with a wide range of equipment, including advanced CNC machine tools and specialized diagnostic instruments. JOB OVERVIEW Comply with all company policies and procedures including Health, Safety and Quality Assurance policies. Report injuries, accidents, near misses or unsafe conditions to a Supervisor or Manager immediately. Trouble shoots and repair plant equipment and processes. Provide support to the production team to produce superior quality materials that meet/exceed client needs. This role supports the needs of manufacturing and facilities to ensure both are in top working order. Locates and diagnoses failures, replace defective components, performs basic troubleshooting using standard equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals and verbal and/or written instructions. Diagnose problems with PLC's and complex control systems. Performs preventative maintenance on equipment as specified. Properly inspect and maintain shop equipment in accordance with OSHA regulation. Installs functional and structural parts in devices or equipment. Prepares new machines and production equipment for operation. Repairs and maintains machinery and mechanical equipment such as pneumatic tools, motors, conveyor systems, production machines, equipment using testing instruments, hand and power tools and precision-measuring instruments. Work with mechanical, hydraulic, pneumatic, vacuum and process ventilation systems. Disassembles machines and repairs or replaces broken parts, adjusts functional parts of mechanical devices as necessary, Cleans and lubricates parts, inspects completed repairs and orders replacement parts. Prepares reports, keeps records, maintains appropriate maintenance, repair logs, requisitions for spare parts, and requires maintenance supplies as required. Maintain a clean, organized and safe shop and production floor. Identify, label and stage parts for the equipment. Electrical & Electromechanical Focus; Performs a wide variety of functions such as installation maintenance, repair of equipment for generating, distributing, and utilizing electrical energy. Uses instruments to test circuits, replace or install new power, light, electronic and control circuits. Repairs complex electrical equipment including motors, switches, switchboards, electrical mechanisms, automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Performs complex wiring assignments; installs, measures, cuts, bonds, threads, assembles and installs electrical conduit. Works from schematics, drawings, layouts, or other specifications to locate and diagnose trouble in the electrical system or equipment. Accurately perform the documentation requirements. Plan and perform other assorted maintenance functions SKILLS AND QUALIFICATIONS Experience: 5+ years of related experience and/or training in a manufacturing environment; with the ability and knowledge to safely use all required power tools and diagnostic equipment necessary to troubleshoot and repair electrical systems, mechanical systems, hydraulic and pneumatic systems and CNC controls preferred. Strong electrical and mechanical maintenance experience and knowledge required Ability to read equipment, component and wiring drawings and schematics; familiar with Hydraulic and Pneumatic systems. Knowledge of occupational hazards and safety precautions of the trades involved. Ability to adjust to changes without compromising Quality or Performance. Must be willing to work a shift schedule and work overtime as needed, including weekends. Knowledge of Fanuc or ABB automation robotics (Preferred) Ability to Welding and burning applications WORK SCHEDULE Monday through Friday with weekend work as needed 2 nd Shift hours are 2pm-11:30pm Shift Differential Pay for 2nd shift hours worked 8-hour shift with overtime daily as needed PHYSICAL DEMANDS Must be able to stand for the duration of scheduled shift Moderate physical effort handling parts. Equivalent to frequently exerting average effort. Ability to manually load or unload materials onto or off of pallets, skids, platforms, saws, and trucks. Able to lift items weighing up to 50 lbs. repetitively. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus Manual dexterity using hands, fingers, and arms to push, pull, reach, grab, hold, lift, and hammer Continuous mental and visual attention in cleaning. Diversified duties requiring constant alertness or activity. WORK ENVIRONMENT Manufacturing warehouse environment with multi step process production runs on different machines. High value highly customized components, long and large parts, and high precision manufacturing for critical service applications Noise Level: Moderate to High Temperature variable with season PI98226f38b28d-3987
09/05/2025
Full time
OUR COMPANY AmeriBolt, founded in 2005, focuses on providing exceptional service to fastener distributors in the Southeast and Gulf Coast regions. Built on a foundation of speed and customer service, AmeriBolt has expanded its capacity while maintaining a commitment to superior service from quotation to delivery. As part of the LoneStar Group, AmeriBolt benefits from LoneStar's global manufacturing capabilities and customer approvals. Together, they offer enhanced value and diversified products to customers. LoneStar is a global leader in high-performance fasteners, gaskets, and flow-control components, serving industries like oil and gas and power generation, with operations across multiple regions. OUR BENEFITS Our Benefits include: Medical Insurance, Dental Insurance, Vision Insurance, Life Insurance, Short Term, and accident insurance. We also offer 401(k) with matching contributions, Flexible Paid Time Off (PTO), Paid Holidays, and the opportunity to be part of a dedicated and reliable team. ESSENTIAL FUNCTIONS AmeriBolt is seeking an experienced and motivated Maintenance Technician to join our growing team! If you're looking for a hands-on role in a fast-paced manufacturing environment-with competitive pay and the opportunity to work with advanced equipment-this is the position for you. We have 1 immediate opening in our Maintenance Department on 2nd shift. The Maintenance Technician is responsible for the routine operation and maintenance of mechanical, pneumatic, hydraulic, ventilation, and electrical systems and devices. Conduct preventative maintenance on manufacturing equipment and facilities, performing repairs and upgrades as necessary, and implementing new equipment and technologies. The role involves working with a wide range of equipment, including advanced CNC machine tools and specialized diagnostic instruments. JOB OVERVIEW Comply with all company policies and procedures including Health, Safety and Quality Assurance policies. Report injuries, accidents, near misses or unsafe conditions to a Supervisor or Manager immediately. Trouble shoots and repair plant equipment and processes. Provide support to the production team to produce superior quality materials that meet/exceed client needs. This role supports the needs of manufacturing and facilities to ensure both are in top working order. Locates and diagnoses failures, replace defective components, performs basic troubleshooting using standard equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals and verbal and/or written instructions. Diagnose problems with PLC's and complex control systems. Performs preventative maintenance on equipment as specified. Properly inspect and maintain shop equipment in accordance with OSHA regulation. Installs functional and structural parts in devices or equipment. Prepares new machines and production equipment for operation. Repairs and maintains machinery and mechanical equipment such as pneumatic tools, motors, conveyor systems, production machines, equipment using testing instruments, hand and power tools and precision-measuring instruments. Work with mechanical, hydraulic, pneumatic, vacuum and process ventilation systems. Disassembles machines and repairs or replaces broken parts, adjusts functional parts of mechanical devices as necessary, Cleans and lubricates parts, inspects completed repairs and orders replacement parts. Prepares reports, keeps records, maintains appropriate maintenance, repair logs, requisitions for spare parts, and requires maintenance supplies as required. Maintain a clean, organized and safe shop and production floor. Identify, label and stage parts for the equipment. Electrical & Electromechanical Focus; Performs a wide variety of functions such as installation maintenance, repair of equipment for generating, distributing, and utilizing electrical energy. Uses instruments to test circuits, replace or install new power, light, electronic and control circuits. Repairs complex electrical equipment including motors, switches, switchboards, electrical mechanisms, automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Performs complex wiring assignments; installs, measures, cuts, bonds, threads, assembles and installs electrical conduit. Works from schematics, drawings, layouts, or other specifications to locate and diagnose trouble in the electrical system or equipment. Accurately perform the documentation requirements. Plan and perform other assorted maintenance functions SKILLS AND QUALIFICATIONS Experience: 5+ years of related experience and/or training in a manufacturing environment; with the ability and knowledge to safely use all required power tools and diagnostic equipment necessary to troubleshoot and repair electrical systems, mechanical systems, hydraulic and pneumatic systems and CNC controls preferred. Strong electrical and mechanical maintenance experience and knowledge required Ability to read equipment, component and wiring drawings and schematics; familiar with Hydraulic and Pneumatic systems. Knowledge of occupational hazards and safety precautions of the trades involved. Ability to adjust to changes without compromising Quality or Performance. Must be willing to work a shift schedule and work overtime as needed, including weekends. Knowledge of Fanuc or ABB automation robotics (Preferred) Ability to Welding and burning applications WORK SCHEDULE Monday through Friday with weekend work as needed 2 nd Shift hours are 2pm-11:30pm Shift Differential Pay for 2nd shift hours worked 8-hour shift with overtime daily as needed PHYSICAL DEMANDS Must be able to stand for the duration of scheduled shift Moderate physical effort handling parts. Equivalent to frequently exerting average effort. Ability to manually load or unload materials onto or off of pallets, skids, platforms, saws, and trucks. Able to lift items weighing up to 50 lbs. repetitively. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus Manual dexterity using hands, fingers, and arms to push, pull, reach, grab, hold, lift, and hammer Continuous mental and visual attention in cleaning. Diversified duties requiring constant alertness or activity. WORK ENVIRONMENT Manufacturing warehouse environment with multi step process production runs on different machines. High value highly customized components, long and large parts, and high precision manufacturing for critical service applications Noise Level: Moderate to High Temperature variable with season PI98226f38b28d-3987
What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: The CNC Grind-Creep Feed Operator , reporting to the Shift Supervisor, is responsible for adhering to all policies and procedures related to the various parts and equipment for which they are trained and certified. Additionally, operators are tasked with loading and unloading parts to meet production demands, inspecting parts using various precision measuring tools, and making decisions to accept or reject parts. They must also effectively communicate any changes both verbally and in writing. Essential Duties: Operate CNC flat surface and creep feed grinding equipment, as well as other machinery as necessary, to produce the required number of correct parts in a timely manner, according to process documentation. This can include operating multiple pieces of equipment simultaneously Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges pin, thread, indicator, height , optical comparators, and coordinate measuring machines CMM Maintain working knowledge of CNC principles, including G and M codes Maintain working knowledge of rotary/linear axes Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required Analyze and interpret CMM reports and properly offset machine dimensions to meet customer specifications Perform deburring operations to within specified tolerances Document actions by updating control charts, travelers, and reporting labor in the ERP system Perform under AS9100 quality standards and NADCAP accreditation Maintains a safe and clean work environment by performing daily housekeeping duties Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management Dependability, integrity, cooperation, and taking the initiative for work responsibilities and challenges are critical Always take ownership and be accountable for your actions Reliable attendance and a respectful demeanor are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience: High school diploma or GED required CNC Machining certificate from a Trade School preferred, or acceptable work experience in lieu of schooling Must meet the ITAR definition of 120.15 U.S. person Duty-related experience, including operation of flat surface grinders, preferred Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with G & M codes preferred Key Competencies: Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Complex problem-solving with critical math skills Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 95% of the scheduled shift Walking or climbing stairs as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free each day. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 20-28 Hourly Wage PI141f774a81a4-7702
09/05/2025
Full time
What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: The CNC Grind-Creep Feed Operator , reporting to the Shift Supervisor, is responsible for adhering to all policies and procedures related to the various parts and equipment for which they are trained and certified. Additionally, operators are tasked with loading and unloading parts to meet production demands, inspecting parts using various precision measuring tools, and making decisions to accept or reject parts. They must also effectively communicate any changes both verbally and in writing. Essential Duties: Operate CNC flat surface and creep feed grinding equipment, as well as other machinery as necessary, to produce the required number of correct parts in a timely manner, according to process documentation. This can include operating multiple pieces of equipment simultaneously Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges pin, thread, indicator, height , optical comparators, and coordinate measuring machines CMM Maintain working knowledge of CNC principles, including G and M codes Maintain working knowledge of rotary/linear axes Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required Analyze and interpret CMM reports and properly offset machine dimensions to meet customer specifications Perform deburring operations to within specified tolerances Document actions by updating control charts, travelers, and reporting labor in the ERP system Perform under AS9100 quality standards and NADCAP accreditation Maintains a safe and clean work environment by performing daily housekeeping duties Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management Dependability, integrity, cooperation, and taking the initiative for work responsibilities and challenges are critical Always take ownership and be accountable for your actions Reliable attendance and a respectful demeanor are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience: High school diploma or GED required CNC Machining certificate from a Trade School preferred, or acceptable work experience in lieu of schooling Must meet the ITAR definition of 120.15 U.S. person Duty-related experience, including operation of flat surface grinders, preferred Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with G & M codes preferred Key Competencies: Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Complex problem-solving with critical math skills Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 95% of the scheduled shift Walking or climbing stairs as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free each day. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 20-28 Hourly Wage PI141f774a81a4-7702
Help us change lives At Exact Sciences, we're helping change how the world prevents, detects and guides treatment for cancer. We give patients and clinicians the clarity needed to make confident decisions when they matter most. Join our team to find a purpose-driven career, an inclusive culture, and robust benefits to support your life while you're working to help others. The Supervisor, Histology (Monday - Friday 12:00pm - 8:30pm) is responsible for the day-to-day operations of Histology in support of meeting production throughput and quality requirements in a manner that utilizes laboratory best practices and adheres to all company policies and procedures. Additionally, the Supervisor, Histology is a point person for interactions with Pathology to ensure that specimens are prepared and delivered on-time and with sufficient quality for Pathology review and analytical testing. This role requires excellent attention to detail, excellent written and verbal communication skills, the ability to multi-task and be flexible with tasks and schedules, and the ability to work independently and in a team environment. The Supervisor, Histology is a liaison between the Accessioning and Histology laboratory staff and various functional groups including, but not limited to, Customer Service, Analytical Laboratory, Process and Service Engineering, Information Technology, Human Resources, and Materials Management groups. As such, the Supervisor, Histology must exhibit leadership skills such as good judgment, sound analysis and decision making, the ability to remain professional and composed under pressure, effective interpersonal skills, and the ability to effectively communicate across all levels of the laboratory and across departments. The Supervisor, Histology directly supervise the histology staff. Emphasis is placed on involvement with scheduling, troubleshooting technical and non-technical challenges, coaching and mentoring the laboratory staff, and building an effective team. The Supervisor, Histology will, in partnership with the lab training team, drive the training of both new hires and current employees with moderate levels of experience to advance the overall technical and organization readiness of the Histology Group. The Supervisor, Histology assists the Histology Management Team in managing projects, meeting project deliverables, and implementing laboratory enhancements. Given the wide variety of tasks involved in this position, the Supervisor, Histology must demonstrate the ability to seek guidance and input when analyzing complex issues and make recommendations that lead to sound decisions in a timely manner, the commitment to helping and motivating employees, the ability to respond to difficult issues quickly, fairly, and ethically, outstanding organizational skills, and the ability to respond to change with flexibility in order to adapt quickly to evolving circumstances. The Supervisor, Histology must be able to utilize various communication channels (e.g., email, communication board, team meetings, one-on-one etc.), to communicate team goals and priorities clearly, openly, and objectively, and to communicate changes, issues, and challenges to various sections of the Clinical Laboratory and applicable cross-functional teams. Essential Duties Include, but are not limited to, the following: Resolution of technical problems in accordance with policies and procedures established by the laboratory director or technical supervisor. Monitoring of test performance. Ensuring that remedial actions are taken when test systems deviate from the laboratory's established performance specifications. Providing or ensuring orientation of testing personnel. Maintain stringent standards for quality; identifying any issues which might adversely impact the quality of test results and/or employee safety and immediately communicating these to the appropriate management representatives, as necessary, to ensure prompt resolution. Oversee the day-to-day operations of the Histology laboratory; including, but not limited to, ensuring processing systems are functioning properly and samples are processed in a timely manner, with sufficient quality, and delivered to Pathology and Analytical Laboratory as expected, monitoring quality control testing results, assisting the Histology Management team in planning, validation, and implementation of new test procedures, and direct supervision of Histology laboratory personnel. Work with the Histology laboratory staff on the laboratory's quality control and quality assurance procedures, technical/process troubleshooting and improvement procedures, and staff training and education programs under the guidance of management. Interact with Clinical Laboratory QA, IT, Process Engineering, Customer Service, and other cross-functional teams to address process and workflow issues. Assist the Histology Management team to manage laboratory and cross-functional projects; such as process improvement, quality improvement, development studies, and new assay launch. Write and review standard operating procedures (SOPs), NCDR and DAR reports, and other documents, as assigned. Write, review, and conduct staff performance assessments, facilitate development discussions, and partner with Histology Management and Human Resources, as needed, to effectively manage staff performance gaps. Conduct the training and competency assessment of Histology staff, under the guidance of Histology management. Assist management in resource management and exploring various improvement initiatives. Assist management in holding staff meetings and implementing staff development plans and team building exercises. Ensure that Histology laboratory operations and personnel conducts meet the requirements of local, state, and federal regulatory agencies and company policies. Participate in quality assurance activities. Assist the staff with daily laboratory processing. Ability to maintain open communication with employees, managers, cross-functional team members, and customers, as needed. Ability to integrate and apply feedback in a professional manner. Ability to prioritize and drive to results with a high emphasis on quality. Ability to work individually and as part of a team. Ability to effectively communicate verbally and in writing technical information to technical and non-technical audiences. Ability to analyze and make recommendations to solve complex issues that impact laboratory processes under the guidance of the Histology Management team. Supervise staff; including, but not limited to, organize and prioritize work, write/conduct performance reviews, train/develop, and manage work performance. Communicate goals clearly to employees to ensure understanding and success in achieving them. Motivate and inspire employees to do their best work through coaching. Maintain morale and support employee engagement initiatives. Uphold company mission and values through accountability, innovation, integrity, quality, and teamwork. Support and comply with the company's Quality Management System policies and procedures. Regular and reliable attendance. Some time spent using near vision to view samples at close range. Use of various chemicals may be used to perform duties. May be exposed to hazardous materials, tissue specimens and instruments with moving parts, lasers, heating and freezing elements, and high-speed centrifugation. Minimum Qualifications Bachelor Degree in a scientific field, 6+ years of laboratory experience. Detailed knowledge and understanding of CAP, CLIA and NY regulations. Professional working knowledge of regulatory inspection preparation and execution. Strong computer skills; including proficiency with standard business software (e.g., Microsoft Office), laboratory information management software (LIMS) systems, and automated instrumentation. Authorization to work in the United States without sponsorship. Demonstrated ability to perform the Essential Duties of the position with or without accommodation. Preferred Qualifications Experience in high volume Clinical or surgical Pathology Laboratory. Experience with using Laboratory Information Management Systems (LIMS). Experience with project management. HT(ASCP) or HLT(ASCP) certification. Possession of active QIHC (Qualification in Immunohistochemistry) through the ASCP Board of Certification. Salary Range: $67,000.00 - $119,000.00 The annual base salary shown is for this position located in US - AZ - Phoenix on a full-time basis. In addition, this position is bonus eligible. Exact Sciences is proud to offer an employee experience that includes paid time off (including days for vacation, holidays, volunteering, and personal time), paid leave for parents and caregivers, a retirement savings plan, wellness support, and health benefits including medical, prescription drug, dental, and vision coverage. Learn more about our benefits . Our success relies on the experiences and perspectives of a diverse team, and Exact Sciences fosters a culture where all employees can develop personally and professionally with a sense of respect and belonging. If you require an accommodation, please contact us here . Not ready to apply? Join our Talent Community to stay updated on the latest news and opportunities at Exact Sciences. We are an equal employment opportunity employer . click apply for full job details
09/04/2025
Full time
Help us change lives At Exact Sciences, we're helping change how the world prevents, detects and guides treatment for cancer. We give patients and clinicians the clarity needed to make confident decisions when they matter most. Join our team to find a purpose-driven career, an inclusive culture, and robust benefits to support your life while you're working to help others. The Supervisor, Histology (Monday - Friday 12:00pm - 8:30pm) is responsible for the day-to-day operations of Histology in support of meeting production throughput and quality requirements in a manner that utilizes laboratory best practices and adheres to all company policies and procedures. Additionally, the Supervisor, Histology is a point person for interactions with Pathology to ensure that specimens are prepared and delivered on-time and with sufficient quality for Pathology review and analytical testing. This role requires excellent attention to detail, excellent written and verbal communication skills, the ability to multi-task and be flexible with tasks and schedules, and the ability to work independently and in a team environment. The Supervisor, Histology is a liaison between the Accessioning and Histology laboratory staff and various functional groups including, but not limited to, Customer Service, Analytical Laboratory, Process and Service Engineering, Information Technology, Human Resources, and Materials Management groups. As such, the Supervisor, Histology must exhibit leadership skills such as good judgment, sound analysis and decision making, the ability to remain professional and composed under pressure, effective interpersonal skills, and the ability to effectively communicate across all levels of the laboratory and across departments. The Supervisor, Histology directly supervise the histology staff. Emphasis is placed on involvement with scheduling, troubleshooting technical and non-technical challenges, coaching and mentoring the laboratory staff, and building an effective team. The Supervisor, Histology will, in partnership with the lab training team, drive the training of both new hires and current employees with moderate levels of experience to advance the overall technical and organization readiness of the Histology Group. The Supervisor, Histology assists the Histology Management Team in managing projects, meeting project deliverables, and implementing laboratory enhancements. Given the wide variety of tasks involved in this position, the Supervisor, Histology must demonstrate the ability to seek guidance and input when analyzing complex issues and make recommendations that lead to sound decisions in a timely manner, the commitment to helping and motivating employees, the ability to respond to difficult issues quickly, fairly, and ethically, outstanding organizational skills, and the ability to respond to change with flexibility in order to adapt quickly to evolving circumstances. The Supervisor, Histology must be able to utilize various communication channels (e.g., email, communication board, team meetings, one-on-one etc.), to communicate team goals and priorities clearly, openly, and objectively, and to communicate changes, issues, and challenges to various sections of the Clinical Laboratory and applicable cross-functional teams. Essential Duties Include, but are not limited to, the following: Resolution of technical problems in accordance with policies and procedures established by the laboratory director or technical supervisor. Monitoring of test performance. Ensuring that remedial actions are taken when test systems deviate from the laboratory's established performance specifications. Providing or ensuring orientation of testing personnel. Maintain stringent standards for quality; identifying any issues which might adversely impact the quality of test results and/or employee safety and immediately communicating these to the appropriate management representatives, as necessary, to ensure prompt resolution. Oversee the day-to-day operations of the Histology laboratory; including, but not limited to, ensuring processing systems are functioning properly and samples are processed in a timely manner, with sufficient quality, and delivered to Pathology and Analytical Laboratory as expected, monitoring quality control testing results, assisting the Histology Management team in planning, validation, and implementation of new test procedures, and direct supervision of Histology laboratory personnel. Work with the Histology laboratory staff on the laboratory's quality control and quality assurance procedures, technical/process troubleshooting and improvement procedures, and staff training and education programs under the guidance of management. Interact with Clinical Laboratory QA, IT, Process Engineering, Customer Service, and other cross-functional teams to address process and workflow issues. Assist the Histology Management team to manage laboratory and cross-functional projects; such as process improvement, quality improvement, development studies, and new assay launch. Write and review standard operating procedures (SOPs), NCDR and DAR reports, and other documents, as assigned. Write, review, and conduct staff performance assessments, facilitate development discussions, and partner with Histology Management and Human Resources, as needed, to effectively manage staff performance gaps. Conduct the training and competency assessment of Histology staff, under the guidance of Histology management. Assist management in resource management and exploring various improvement initiatives. Assist management in holding staff meetings and implementing staff development plans and team building exercises. Ensure that Histology laboratory operations and personnel conducts meet the requirements of local, state, and federal regulatory agencies and company policies. Participate in quality assurance activities. Assist the staff with daily laboratory processing. Ability to maintain open communication with employees, managers, cross-functional team members, and customers, as needed. Ability to integrate and apply feedback in a professional manner. Ability to prioritize and drive to results with a high emphasis on quality. Ability to work individually and as part of a team. Ability to effectively communicate verbally and in writing technical information to technical and non-technical audiences. Ability to analyze and make recommendations to solve complex issues that impact laboratory processes under the guidance of the Histology Management team. Supervise staff; including, but not limited to, organize and prioritize work, write/conduct performance reviews, train/develop, and manage work performance. Communicate goals clearly to employees to ensure understanding and success in achieving them. Motivate and inspire employees to do their best work through coaching. Maintain morale and support employee engagement initiatives. Uphold company mission and values through accountability, innovation, integrity, quality, and teamwork. Support and comply with the company's Quality Management System policies and procedures. Regular and reliable attendance. Some time spent using near vision to view samples at close range. Use of various chemicals may be used to perform duties. May be exposed to hazardous materials, tissue specimens and instruments with moving parts, lasers, heating and freezing elements, and high-speed centrifugation. Minimum Qualifications Bachelor Degree in a scientific field, 6+ years of laboratory experience. Detailed knowledge and understanding of CAP, CLIA and NY regulations. Professional working knowledge of regulatory inspection preparation and execution. Strong computer skills; including proficiency with standard business software (e.g., Microsoft Office), laboratory information management software (LIMS) systems, and automated instrumentation. Authorization to work in the United States without sponsorship. Demonstrated ability to perform the Essential Duties of the position with or without accommodation. Preferred Qualifications Experience in high volume Clinical or surgical Pathology Laboratory. Experience with using Laboratory Information Management Systems (LIMS). Experience with project management. HT(ASCP) or HLT(ASCP) certification. Possession of active QIHC (Qualification in Immunohistochemistry) through the ASCP Board of Certification. Salary Range: $67,000.00 - $119,000.00 The annual base salary shown is for this position located in US - AZ - Phoenix on a full-time basis. In addition, this position is bonus eligible. Exact Sciences is proud to offer an employee experience that includes paid time off (including days for vacation, holidays, volunteering, and personal time), paid leave for parents and caregivers, a retirement savings plan, wellness support, and health benefits including medical, prescription drug, dental, and vision coverage. Learn more about our benefits . Our success relies on the experiences and perspectives of a diverse team, and Exact Sciences fosters a culture where all employees can develop personally and professionally with a sense of respect and belonging. If you require an accommodation, please contact us here . Not ready to apply? Join our Talent Community to stay updated on the latest news and opportunities at Exact Sciences. We are an equal employment opportunity employer . click apply for full job details
Magnetic Technologies Corporation
Woodstock, Illinois
Arnold Magnetic Technologies is a leading global manufacturer of high-performance permanent magnets, flexible composites, electromagnets, magnetic assemblies, and precision thin metal foils. Arnold's magnets, metals, and systems are used in high-efficiency electric motors and generators, sensors, batteries, and more. Brief Summary of Position: Perform a variety of duties in the set-up and operation of roll conditioning equipment used to condition a variety of mill rollers and in the set-up and operation of mill rewind and cleaning lines. Responsibilities/Essential Functions of Position: Work from standard processing or verbal instructions. Maintain job and production records. Maintain identity of materials. Assist in other areas of the PTM facility as necessary. Machine Tooling Operator (Lapper) Responsibilities: Set-up manual & automatic lapping machines. Select rotary lap needed to condition mill roll. Place roll into lapper, start machine and move pressure paddle back and forth to remove defects, such as gouges, pin pricks, holes and unparalleled. Use instruments to measure and assure that necessary roll dimensional and surface finish requirements are met. Deburr strip, when required. Maintain identification of materials. Perform any other functions related to the lapping and tool conditioning. Rewind Responsibilities: Set-up and operate foil mill rewind and cleaning lines. Detect and correct operations difficulties. Report unusual operating difficulties to supervisor. Operate rewind and test equipment to perform visual strip inspection for color, holes, streaks, and lamination, magnetic and other defects. Keep work area in a clean an orderly condition. Required Technical/Job Experience and Qualifications: 1-3 years in a manufacturing environment Basic math skills (add, subtract, multiply and divide) using decimals and fractions. Strong communication skills to facilitate productive and consistent handling of material Education Requirements: High School degree, diploma or a GED equivalent qualification from a certified college. Working Conditions: Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected Working production environment Physical Requirements: Must be able to lift a minimum of 25 - 40 pounds Occasionally, must use hand-trucks Standing for extended periods of time Machines/Equipment Used: Variety of hand tools. Lapping machines Micrometers, microscopes 2nd Shift Hours: 3:30PM - 11:30AM 3rd Shift Hours: 11:30PM - 7:30AM Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran PI7f806d1069b2-7936
09/04/2025
Full time
Arnold Magnetic Technologies is a leading global manufacturer of high-performance permanent magnets, flexible composites, electromagnets, magnetic assemblies, and precision thin metal foils. Arnold's magnets, metals, and systems are used in high-efficiency electric motors and generators, sensors, batteries, and more. Brief Summary of Position: Perform a variety of duties in the set-up and operation of roll conditioning equipment used to condition a variety of mill rollers and in the set-up and operation of mill rewind and cleaning lines. Responsibilities/Essential Functions of Position: Work from standard processing or verbal instructions. Maintain job and production records. Maintain identity of materials. Assist in other areas of the PTM facility as necessary. Machine Tooling Operator (Lapper) Responsibilities: Set-up manual & automatic lapping machines. Select rotary lap needed to condition mill roll. Place roll into lapper, start machine and move pressure paddle back and forth to remove defects, such as gouges, pin pricks, holes and unparalleled. Use instruments to measure and assure that necessary roll dimensional and surface finish requirements are met. Deburr strip, when required. Maintain identification of materials. Perform any other functions related to the lapping and tool conditioning. Rewind Responsibilities: Set-up and operate foil mill rewind and cleaning lines. Detect and correct operations difficulties. Report unusual operating difficulties to supervisor. Operate rewind and test equipment to perform visual strip inspection for color, holes, streaks, and lamination, magnetic and other defects. Keep work area in a clean an orderly condition. Required Technical/Job Experience and Qualifications: 1-3 years in a manufacturing environment Basic math skills (add, subtract, multiply and divide) using decimals and fractions. Strong communication skills to facilitate productive and consistent handling of material Education Requirements: High School degree, diploma or a GED equivalent qualification from a certified college. Working Conditions: Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected Working production environment Physical Requirements: Must be able to lift a minimum of 25 - 40 pounds Occasionally, must use hand-trucks Standing for extended periods of time Machines/Equipment Used: Variety of hand tools. Lapping machines Micrometers, microscopes 2nd Shift Hours: 3:30PM - 11:30AM 3rd Shift Hours: 11:30PM - 7:30AM Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran PI7f806d1069b2-7936
U.S. Tsubaki Power Transmission, LLC
Holyoke, Massachusetts
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Set-up and operate a wide range of presses to assemble chain and other operations associated to ensure that all assembly processes are maintained and run to the high levels of efficiency and quality stipulated by U.S. Tsubaki standards. Primarily responsible for set-up and operation of a complete range of automatic chain assembly equipment, semi automatic equipment, power presses, pre-stressing equipment, greasing and packaging equipment. Able to measure all quality parameters of assembled chain and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Assist, train and develop operators. Requirements: Must have followed an approved training program for setting up and operating all equipment in a section. Strong mechanical ability is a must. Trade school qualification in manufacturing / engineering related discipline desirable. Requires sufficient knowledge of press operation and set-up. A tooling background would help. Must be able to read, interpret and follow instructions on engineering drawings, etc. Prior Set-up experience on automatic, mechanical and hydraulic press equipment required. Must be self-motivated to ensure that allocated work load is completed in a timely, efficient manner. Able to work from drawings, production schedules work routings and verbal instruction of group leader or supervisor. Understand and follow procedures specified by the company for both Quality and Operation of the assembly process. Able to select proper tooling, equipment, and materials for the job at hand. Must be flexible and able to change and adapt working practices as required to suit the changing needs of the business. Must be capable of setting up and maintaining mechanical equipment/assemblies. Follow direction / instruction of group leader or supervisor. Must provide adequate parts to the operation to maintain efficient flow of product. Must be physically fit and capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PIa71b7d930e4e-2705
09/04/2025
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Set-up and operate a wide range of presses to assemble chain and other operations associated to ensure that all assembly processes are maintained and run to the high levels of efficiency and quality stipulated by U.S. Tsubaki standards. Primarily responsible for set-up and operation of a complete range of automatic chain assembly equipment, semi automatic equipment, power presses, pre-stressing equipment, greasing and packaging equipment. Able to measure all quality parameters of assembled chain and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Assist, train and develop operators. Requirements: Must have followed an approved training program for setting up and operating all equipment in a section. Strong mechanical ability is a must. Trade school qualification in manufacturing / engineering related discipline desirable. Requires sufficient knowledge of press operation and set-up. A tooling background would help. Must be able to read, interpret and follow instructions on engineering drawings, etc. Prior Set-up experience on automatic, mechanical and hydraulic press equipment required. Must be self-motivated to ensure that allocated work load is completed in a timely, efficient manner. Able to work from drawings, production schedules work routings and verbal instruction of group leader or supervisor. Understand and follow procedures specified by the company for both Quality and Operation of the assembly process. Able to select proper tooling, equipment, and materials for the job at hand. Must be flexible and able to change and adapt working practices as required to suit the changing needs of the business. Must be capable of setting up and maintaining mechanical equipment/assemblies. Follow direction / instruction of group leader or supervisor. Must provide adequate parts to the operation to maintain efficient flow of product. Must be physically fit and capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PIa71b7d930e4e-2705
What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: The CNC Grind-Creep Feed Operator , reporting to the Shift Supervisor, is responsible for adhering to all policies and procedures related to the various parts and equipment for which they are trained and certified. Additionally, operators are tasked with loading and unloading parts to meet production demands, inspecting parts using various precision measuring tools, and making decisions to accept or reject parts. They must also effectively communicate any changes both verbally and in writing. Essential Duties: Operate CNC flat surface and creep feed grinding equipment, as well as other machinery as necessary, to produce the required number of correct parts in a timely manner, according to process documentation. This can include operating multiple pieces of equipment simultaneously Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges pin, thread, indicator, height , optical comparators, and coordinate measuring machines CMM Maintain working knowledge of CNC principles, including G and M codes Maintain working knowledge of rotary/linear axes Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required Analyze and interpret CMM reports and properly offset machine dimensions to meet customer specifications Perform deburring operations to within specified tolerances Document actions by updating control charts, travelers, and reporting labor in the ERP system Perform under AS9100 quality standards and NADCAP accreditation Maintains a safe and clean work environment by performing daily housekeeping duties Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management Dependability, integrity, cooperation, and taking the initiative for work responsibilities and challenges are critical Always take ownership and be accountable for your actions Reliable attendance and a respectful demeanor are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience: High school diploma or GED required CNC Machining certificate from a Trade School preferred, or acceptable work experience in lieu of schooling Must meet the ITAR definition of 120.15 U.S. person Duty-related experience, including operation of flat surface grinders, preferred Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with G & M codes preferred Key Competencies: Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Complex problem-solving with critical math skills Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 95% of the scheduled shift Walking or climbing stairs as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free each day. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 20-28 Hourly Wage PIf9408d5b7e38-7702
09/04/2025
Full time
What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: The CNC Grind-Creep Feed Operator , reporting to the Shift Supervisor, is responsible for adhering to all policies and procedures related to the various parts and equipment for which they are trained and certified. Additionally, operators are tasked with loading and unloading parts to meet production demands, inspecting parts using various precision measuring tools, and making decisions to accept or reject parts. They must also effectively communicate any changes both verbally and in writing. Essential Duties: Operate CNC flat surface and creep feed grinding equipment, as well as other machinery as necessary, to produce the required number of correct parts in a timely manner, according to process documentation. This can include operating multiple pieces of equipment simultaneously Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges pin, thread, indicator, height , optical comparators, and coordinate measuring machines CMM Maintain working knowledge of CNC principles, including G and M codes Maintain working knowledge of rotary/linear axes Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required Analyze and interpret CMM reports and properly offset machine dimensions to meet customer specifications Perform deburring operations to within specified tolerances Document actions by updating control charts, travelers, and reporting labor in the ERP system Perform under AS9100 quality standards and NADCAP accreditation Maintains a safe and clean work environment by performing daily housekeeping duties Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management Dependability, integrity, cooperation, and taking the initiative for work responsibilities and challenges are critical Always take ownership and be accountable for your actions Reliable attendance and a respectful demeanor are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience: High school diploma or GED required CNC Machining certificate from a Trade School preferred, or acceptable work experience in lieu of schooling Must meet the ITAR definition of 120.15 U.S. person Duty-related experience, including operation of flat surface grinders, preferred Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with G & M codes preferred Key Competencies: Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Complex problem-solving with critical math skills Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 95% of the scheduled shift Walking or climbing stairs as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free each day. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 20-28 Hourly Wage PIf9408d5b7e38-7702
Who We Are and What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: Reporting to the Manufacturing Supervisor, the FPI Inspector is responsible for following all policies and procedures associated with the various parts and equipment that they may be required to run. In addition, inspectors must load/unload parts, inspect parts using various precision measuring tools, accept or reject parts, and communicate any changes, both verbally and in writing. Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications. Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary, such as borescopes, rulers, calipers, gauges, or micrometers. Perform and document the scheduled FPI test log and reports Maintain, test, and replenish dipping solutions Clean parts using chemical degreaser and parts wash machine Prep parts using specialized material Inspect parts using ultraviolet light Report proper labor hours in the ERP system Maintain a safe and clean work environment by performing daily housekeeping duties Updates job knowledge by participating in educational opportunities and reading technical publications. Follow all Hi-Tek policies and procedures, including the use of proper PPE Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment. Strong communication and interpersonal skills to maintain a working relationship with Quality and Engineering Dependability, integrity, cooperation, and taking the initiative for responsibilities and challenges are critical Ability to operate autonomously and self-direct Good and reliable attendance and a positive attitude are a must Any other duties needed to help drive our vision, fulfill our mission, and abide by our organization's values Education and Experience: Must meet the ITAR definition of 120.15 U.S. person High school diploma or GED required Must have at a minimum a Level I FPI certificate with the ability to obtain Level II FPI certification Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with Repair and Overhaul FPI Inspection Experience with other NDT fields, i.e., X-Ray Troubleshooting/problem-solving skills Key Competencies: The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass the annual vision test as required. Perform under AS9100 standards and NADCAP accreditation Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 50% of the scheduled shift Walking or sitting as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free daily. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 22-28 Hourly Wage PI6d5f271c6-
09/04/2025
Full time
Who We Are and What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: What You Will Do: Reporting to the Manufacturing Supervisor, the FPI Inspector is responsible for following all policies and procedures associated with the various parts and equipment that they may be required to run. In addition, inspectors must load/unload parts, inspect parts using various precision measuring tools, accept or reject parts, and communicate any changes, both verbally and in writing. Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications. Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary, such as borescopes, rulers, calipers, gauges, or micrometers. Perform and document the scheduled FPI test log and reports Maintain, test, and replenish dipping solutions Clean parts using chemical degreaser and parts wash machine Prep parts using specialized material Inspect parts using ultraviolet light Report proper labor hours in the ERP system Maintain a safe and clean work environment by performing daily housekeeping duties Updates job knowledge by participating in educational opportunities and reading technical publications. Follow all Hi-Tek policies and procedures, including the use of proper PPE Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment. Strong communication and interpersonal skills to maintain a working relationship with Quality and Engineering Dependability, integrity, cooperation, and taking the initiative for responsibilities and challenges are critical Ability to operate autonomously and self-direct Good and reliable attendance and a positive attitude are a must Any other duties needed to help drive our vision, fulfill our mission, and abide by our organization's values Education and Experience: Must meet the ITAR definition of 120.15 U.S. person High school diploma or GED required Must have at a minimum a Level I FPI certificate with the ability to obtain Level II FPI certification Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with Repair and Overhaul FPI Inspection Experience with other NDT fields, i.e., X-Ray Troubleshooting/problem-solving skills Key Competencies: The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass the annual vision test as required. Perform under AS9100 standards and NADCAP accreditation Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 50% of the scheduled shift Walking or sitting as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free daily. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! Compensation details: 22-28 Hourly Wage PI6d5f271c6-
Now Hiring General Laborers & Fabricators Training wage is $23.67! 2nd Shift starting at $25.17! Weekend Shift starting at $26.67! Flexibility to be Hired for Either 2nd or Weekend Shift Shifts Available: 2nd Shift: Mondays - Thursdays, 3:45pm - 3:30am; Fridays, 3:45pm - 8:45pm Weekend Shift: Fridays - Sundays; 5:00am - 5:00pm 2 nd Shift: Hours Over 40 Paid at Time and a Half Weekend Shift: Hours Over 36 Paid at Time and a Half All Shifts: Hours Over 50 Paid at Double Time At Veritas Steel, we're leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Advantages of Working Here: Weekly Paycheck Weekly Attendance Bonus Paid Training Safety Boot Reimbursement Paid Vacation Hours Paid Company Holidays Medical, Dental, & Vision Insurance Pension Program A Day in the Life: As a General Laborer/Fabricator employed at Veritas Steel's Wausau location, you are responsible for grinding, drilling, shop clean-up, and miscellaneous tasks. You can meet production demands promptly and complete high-quality work. Your Skills Include: High School diploma or GED Great attendance to learn and grow your skills Commitment to the attendance policy and procedures Commitment to work safety and actively participating in our safety culture Quality, accuracy, thoroughness, and reliability of work performed Your Day Includes: Operating hand and power tools, such as grinders and sanders Assisting with setup and operation of equipment necessary to fabricate material as required by job specifications Maintaining a clean and organized work environment, including the proper storage and disposal of materials Using proper safety equipment to ensure surfaces are adequately prepared for all operations Coordinating with shop supervisor and other personnel to complete work orders efficiently, on time, and with top-notch quality Performing other tasks as assigned by the supervisor Your Physical Abilities: Able to lift 40 lbs. and carry 30 lbs. Must be able to push /move objects up to 50 lbs. of force Pulling requirements up to 122 lbs. of force Necessary to stand, walk, stoop, and kneel Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Your Environment: Work performed indoors in a large warehouse or outside in all weather conditions Regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel, and other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Compensation details: 23.67-26.67 Hourly Wage PIe1fb-3636
09/03/2025
Full time
Now Hiring General Laborers & Fabricators Training wage is $23.67! 2nd Shift starting at $25.17! Weekend Shift starting at $26.67! Flexibility to be Hired for Either 2nd or Weekend Shift Shifts Available: 2nd Shift: Mondays - Thursdays, 3:45pm - 3:30am; Fridays, 3:45pm - 8:45pm Weekend Shift: Fridays - Sundays; 5:00am - 5:00pm 2 nd Shift: Hours Over 40 Paid at Time and a Half Weekend Shift: Hours Over 36 Paid at Time and a Half All Shifts: Hours Over 50 Paid at Double Time At Veritas Steel, we're leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Advantages of Working Here: Weekly Paycheck Weekly Attendance Bonus Paid Training Safety Boot Reimbursement Paid Vacation Hours Paid Company Holidays Medical, Dental, & Vision Insurance Pension Program A Day in the Life: As a General Laborer/Fabricator employed at Veritas Steel's Wausau location, you are responsible for grinding, drilling, shop clean-up, and miscellaneous tasks. You can meet production demands promptly and complete high-quality work. Your Skills Include: High School diploma or GED Great attendance to learn and grow your skills Commitment to the attendance policy and procedures Commitment to work safety and actively participating in our safety culture Quality, accuracy, thoroughness, and reliability of work performed Your Day Includes: Operating hand and power tools, such as grinders and sanders Assisting with setup and operation of equipment necessary to fabricate material as required by job specifications Maintaining a clean and organized work environment, including the proper storage and disposal of materials Using proper safety equipment to ensure surfaces are adequately prepared for all operations Coordinating with shop supervisor and other personnel to complete work orders efficiently, on time, and with top-notch quality Performing other tasks as assigned by the supervisor Your Physical Abilities: Able to lift 40 lbs. and carry 30 lbs. Must be able to push /move objects up to 50 lbs. of force Pulling requirements up to 122 lbs. of force Necessary to stand, walk, stoop, and kneel Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Your Environment: Work performed indoors in a large warehouse or outside in all weather conditions Regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel, and other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Compensation details: 23.67-26.67 Hourly Wage PIe1fb-3636
Join The Inn Crowd! The Holiday Inn Express in Grandville is a fast-paced, high-energy workplace, with endless opportunities for advancement. Come join the best team in the Hospitality Industry! Guest Service Representative Shift: 2nd Shift, weekend availability required. PART-TIME Guest Service Representative Wage: Starting at $16/hour Guest Service Representative can be used as a PAID internship Guest Service Representative Position Summary: Responsible for providing strong sales techniques and excellent guest service, according to Suburban Inns' Core Values and Suburban Inns/IHG standards, as well as going above and beyond to ensure that guests are 100% satisfied. Guest Service Representative Benefits Include: Employee and Friends & Family hotel and restaurant discounts Earned Paid Time Off for ALL Team Members Insurance (health, vision, dental, life) for full time Team Members Flexible schedules Holiday Pay 8 hours of paid volunteer time per year Advancement opportunities Monetary recognition program Monetary referral program 100% paid maternity/paternity or adoption leave for those who qualify for FMLA Employee Assistance Program (EAP) through Pine Rest (3 free counseling visits, online library, and access to legal, financial and elder care consultations) Guest Service Representative Essential Functions: Greet all guests in a friendly, positive manner. Ask questions of guests and make personal connections to make them feel they are welcome and valued Sell the property according to the Suburban Inns sales standard Gather the appropriate data from each guest, from address information to credit cards and signatures Follow the shift checklists each day, completing every task in order to ensure smooth and efficient hotel operations Record any special needs or requests and unique occurrences throughout the shift in Quore. Communicate any unordinary occurrences to the next shift. Maintain a neat and clean workspace at the front desk and adjacent areas Check the pool area as many times as needed throughout the shift, stocking pool towels and straightening up the pool deck Perform property walk-arounds as needed throughout the shift, and address all issues encountered. All trash, used towels, etc. must be picked up, lobby coffee stocked, check public restrooms and clean if necessary. Keep eyes open for any and all safety and security issues. Report any problems to the appropriate department and General Manager Complete any required emergency training needed according to Suburban Inns and IHG standards, with documentation of training being completed. Stay knowledgeable of all emergency procedures and aware of how to handle each situation Complete any required IHG training for front desk procedures and IHG Rewards Club, 100% responsible for ensuring IHG Rewards Club standards are exceeded each shift Responsible for the settlement and reconciling of guest accounts and paperwork Balance cash drawer and make appropriate cash drops Provide excellent guest service: Supply information to guests regarding hotel policies, services, and amenities Respond to guest requests for assistance and information on the surrounding areas, such as directions, dining, entertainment, and events Handle all guest concerns and be able to problem solve in a tactful, professional manner Maintain open lines of communication between all departments within the hotel Follow all Suburban Inns Processes Exhibit regular and recurrent attendance records Other duties as requested by management Guest Service Representative Position Requirements: Minimum Knowledge: Requires ability to interpret/extract information and/or perform arithmetic functions. May require typing, basic computer knowledge, record keeping, or word processing. Good communication skills Formal Education and Job-Related Experience: This position requires a minimum formal education of a high school diploma or equivalent related experience License, Training, and/or Certification Required: CPR Certification (may be completed upon hire) Work Schedule: Work regularly requires or varies between day, evening, night, holiday, and/or weekend assignments. Schedule varies according to business demands and needs Required Travel: Position does not require travel to other Suburban Inns properties or client locations. Work is completed on the property Guest Service Representative Uniform and Appearance Guidelines: Uniform: Uniform shirt and name tag provided. Close-toed shoes are the responsibility of the Team Member. Appearance: Hair must be well-groomed. All facial piercings and tattoos that are not covered by a work uniform must be approved by management. Any tattoo that is deemed offensive to co-workers, guests, vendors or others in the workplace based on racial, sexual, religious, ethnic or other characteristics or attributes of a sensitive or legally protected nature are not permitted and must remain covered or concealed at all times. This policy will be administered by the position's supervisor, without regard to race, religion, age, sex, national origin, disability, height, weight, genetics, familial status, veteran status, and other protected characteristics. The Vice President of Hotel Operations has the authority to veto any decision made by the position's supervisor. Powered by JazzHR Compensation details: 16 Hourly Wage PI57bccc5-
09/03/2025
Full time
Join The Inn Crowd! The Holiday Inn Express in Grandville is a fast-paced, high-energy workplace, with endless opportunities for advancement. Come join the best team in the Hospitality Industry! Guest Service Representative Shift: 2nd Shift, weekend availability required. PART-TIME Guest Service Representative Wage: Starting at $16/hour Guest Service Representative can be used as a PAID internship Guest Service Representative Position Summary: Responsible for providing strong sales techniques and excellent guest service, according to Suburban Inns' Core Values and Suburban Inns/IHG standards, as well as going above and beyond to ensure that guests are 100% satisfied. Guest Service Representative Benefits Include: Employee and Friends & Family hotel and restaurant discounts Earned Paid Time Off for ALL Team Members Insurance (health, vision, dental, life) for full time Team Members Flexible schedules Holiday Pay 8 hours of paid volunteer time per year Advancement opportunities Monetary recognition program Monetary referral program 100% paid maternity/paternity or adoption leave for those who qualify for FMLA Employee Assistance Program (EAP) through Pine Rest (3 free counseling visits, online library, and access to legal, financial and elder care consultations) Guest Service Representative Essential Functions: Greet all guests in a friendly, positive manner. Ask questions of guests and make personal connections to make them feel they are welcome and valued Sell the property according to the Suburban Inns sales standard Gather the appropriate data from each guest, from address information to credit cards and signatures Follow the shift checklists each day, completing every task in order to ensure smooth and efficient hotel operations Record any special needs or requests and unique occurrences throughout the shift in Quore. Communicate any unordinary occurrences to the next shift. Maintain a neat and clean workspace at the front desk and adjacent areas Check the pool area as many times as needed throughout the shift, stocking pool towels and straightening up the pool deck Perform property walk-arounds as needed throughout the shift, and address all issues encountered. All trash, used towels, etc. must be picked up, lobby coffee stocked, check public restrooms and clean if necessary. Keep eyes open for any and all safety and security issues. Report any problems to the appropriate department and General Manager Complete any required emergency training needed according to Suburban Inns and IHG standards, with documentation of training being completed. Stay knowledgeable of all emergency procedures and aware of how to handle each situation Complete any required IHG training for front desk procedures and IHG Rewards Club, 100% responsible for ensuring IHG Rewards Club standards are exceeded each shift Responsible for the settlement and reconciling of guest accounts and paperwork Balance cash drawer and make appropriate cash drops Provide excellent guest service: Supply information to guests regarding hotel policies, services, and amenities Respond to guest requests for assistance and information on the surrounding areas, such as directions, dining, entertainment, and events Handle all guest concerns and be able to problem solve in a tactful, professional manner Maintain open lines of communication between all departments within the hotel Follow all Suburban Inns Processes Exhibit regular and recurrent attendance records Other duties as requested by management Guest Service Representative Position Requirements: Minimum Knowledge: Requires ability to interpret/extract information and/or perform arithmetic functions. May require typing, basic computer knowledge, record keeping, or word processing. Good communication skills Formal Education and Job-Related Experience: This position requires a minimum formal education of a high school diploma or equivalent related experience License, Training, and/or Certification Required: CPR Certification (may be completed upon hire) Work Schedule: Work regularly requires or varies between day, evening, night, holiday, and/or weekend assignments. Schedule varies according to business demands and needs Required Travel: Position does not require travel to other Suburban Inns properties or client locations. Work is completed on the property Guest Service Representative Uniform and Appearance Guidelines: Uniform: Uniform shirt and name tag provided. Close-toed shoes are the responsibility of the Team Member. Appearance: Hair must be well-groomed. All facial piercings and tattoos that are not covered by a work uniform must be approved by management. Any tattoo that is deemed offensive to co-workers, guests, vendors or others in the workplace based on racial, sexual, religious, ethnic or other characteristics or attributes of a sensitive or legally protected nature are not permitted and must remain covered or concealed at all times. This policy will be administered by the position's supervisor, without regard to race, religion, age, sex, national origin, disability, height, weight, genetics, familial status, veteran status, and other protected characteristics. The Vice President of Hotel Operations has the authority to veto any decision made by the position's supervisor. Powered by JazzHR Compensation details: 16 Hourly Wage PI57bccc5-
Build Your Legacy with Veritas Steel! We take great pride in the bridges we build, and in the people who build them! General labor / Paint Shop starting pay is $24.57-$28.05 based on shift. Weekly Pay! 1 st shift: 5AM-420PM Mon-Thurs 2 nd Shift: 430PM-430AM Mon-Thurs Weekend Shift: 5AM-5PM Fri-Sun Double time after 50 hours worked in a week! We offer a very competitive benefit package! We offer company-paid life and accidental death & dismemberment insurance and short-term disability insurance, employee-paid medical insurance, dental and vision care, long-term disability insurance, flexible spending account, and a retirement plan consisting of a 401(k) plan and a pension with a weekly company contribution! You will begin earning vacation time the first complete month of employment! We also have 10 paid Holidays! We provide uniforms, annual boot allowance, and provide necessary Safety Personal Protective Equipment (PPE). General Laborer / Paint Shop employee at Veritas Steel's Eau Claire location are responsible for supporting the painting process of steel products. The successful candidate will work closely with the paint team to ensure products are properly prepped, painted, and inspected. Must be 18 years old to apply. General Laborer / Paint Shop Principle Duties & Responsibilities: Assist with preparation and painting of steel products using various tools and equipment Operate hand and power tools, such as grinders and sanders, to clean and prepare surfaces for painting Follow safety protocols and guidelines while handling and applying paint and related chemicals Assist with setup and operation of equipment necessary to coat fabricated material as required by job specifications Help maintain a clean and organized work environment, including the proper storage and disposal of materials Perform other tasks as assigned by the paint team lead or supervisor General Laborer / Paint Shop Knowledge, Skills, & Abilities: Previous sandblast and paint experience; preferred Commitment to working safely and actively participating in our safety culture The ability to work with and communicate well with others Maintain quality, accuracy, thoroughness, and reliability of work performed General Laborer / Paint Shop Physical Requirements: Able to lift up to 75lbs occasionally Must be able to push/pull/move objects up to 100 lbs. of force Necessary to stand, walk, stoop, climb, and kneel Must have a good range of motion when reaching forward, shoulder to overhead, and bending General Laborer / Paint Shop Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Safety is our priority! We have a very extensive training program to ensure the safety of all of our employees. Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. 1st shift: 5AM-420PM Mon-Thurs 2nd Shift: 430PM-430AM Mon-Thurs Weekend Shift: 5AM-5PM Fri-Sun Compensation details: 24.57-28.05 Hourly Wage PIe6a52dd5-
09/03/2025
Full time
Build Your Legacy with Veritas Steel! We take great pride in the bridges we build, and in the people who build them! General labor / Paint Shop starting pay is $24.57-$28.05 based on shift. Weekly Pay! 1 st shift: 5AM-420PM Mon-Thurs 2 nd Shift: 430PM-430AM Mon-Thurs Weekend Shift: 5AM-5PM Fri-Sun Double time after 50 hours worked in a week! We offer a very competitive benefit package! We offer company-paid life and accidental death & dismemberment insurance and short-term disability insurance, employee-paid medical insurance, dental and vision care, long-term disability insurance, flexible spending account, and a retirement plan consisting of a 401(k) plan and a pension with a weekly company contribution! You will begin earning vacation time the first complete month of employment! We also have 10 paid Holidays! We provide uniforms, annual boot allowance, and provide necessary Safety Personal Protective Equipment (PPE). General Laborer / Paint Shop employee at Veritas Steel's Eau Claire location are responsible for supporting the painting process of steel products. The successful candidate will work closely with the paint team to ensure products are properly prepped, painted, and inspected. Must be 18 years old to apply. General Laborer / Paint Shop Principle Duties & Responsibilities: Assist with preparation and painting of steel products using various tools and equipment Operate hand and power tools, such as grinders and sanders, to clean and prepare surfaces for painting Follow safety protocols and guidelines while handling and applying paint and related chemicals Assist with setup and operation of equipment necessary to coat fabricated material as required by job specifications Help maintain a clean and organized work environment, including the proper storage and disposal of materials Perform other tasks as assigned by the paint team lead or supervisor General Laborer / Paint Shop Knowledge, Skills, & Abilities: Previous sandblast and paint experience; preferred Commitment to working safely and actively participating in our safety culture The ability to work with and communicate well with others Maintain quality, accuracy, thoroughness, and reliability of work performed General Laborer / Paint Shop Physical Requirements: Able to lift up to 75lbs occasionally Must be able to push/pull/move objects up to 100 lbs. of force Necessary to stand, walk, stoop, climb, and kneel Must have a good range of motion when reaching forward, shoulder to overhead, and bending General Laborer / Paint Shop Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Safety is our priority! We have a very extensive training program to ensure the safety of all of our employees. Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. 1st shift: 5AM-420PM Mon-Thurs 2nd Shift: 430PM-430AM Mon-Thurs Weekend Shift: 5AM-5PM Fri-Sun Compensation details: 24.57-28.05 Hourly Wage PIe6a52dd5-
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Shop Leader Mechanic - 2nd Shift US-PA-Bernville Job ID: Type: Regular Full-Time # of Openings: 1 Category: Maintenance Landis C. Deck & Sons Division Overview Landis C. Deck & Sons, a division of the H&K Group, Inc. is looking for 2nd Shift Shop Leader/Mechanic to guide mechanics in the proper repair and servicing of all company owned assets, including electric, diesel, and gasoline industrial trucks and equipment . The ideal candidate is self-motivated, organized, competent, and professional . Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA/MSHA and H&K Safety policies Performs all duties of employees supervised as required Performs repairs, services, inspections, and DVIR Assigns tasks to mechanics Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic maintenance and repair of trucks and equipment Communicates with supervisors and operations personnel in the event of an unscheduled repair requirement that would lead to the loss of use of any truck or piece of equipment Maintains requisitions and supply of spare parts Enforces all company policies and procedures Maintains a safe, clean, non-bias shop Maintains shop to comply with all MSHA and OSHA regulations Maintains all licensed equipment and vehicles to comply with DOT regulations Responsible for all mechanics at that facility Provides a dependable, safe asset repaired in a cost-effective manner Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training Equivalent combinations of education and experience may be considered Two years of supervisory experience Class A or B CDL or ability to obtain within one year Clean driving record State Inspection License Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience 4 years of related experience and/or training State Inspection license Experience working in heavy civil construction, road construction, or quarries OSHA, MSHA, or other relevant safety certifications Physical Demands Frequently required to: Stand, walk, sit Use hands to finger, handle, feel, and grasp Reach with hands and arms Talk or hear Climb, balance, crawl, stoop, crouch, kneel, Lift and/or move up to 75 pounds Work Environment Regularly exposed to: Moving mechanical parts Fumes or airborne particles Occasionally exposed to: Wet/humid conditions Outside weather including extreme cold and heat Risk of electrical shock High, precarious places Noise level is usually moderate The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! PI11449b9edb59-0096
09/02/2025
Full time
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Shop Leader Mechanic - 2nd Shift US-PA-Bernville Job ID: Type: Regular Full-Time # of Openings: 1 Category: Maintenance Landis C. Deck & Sons Division Overview Landis C. Deck & Sons, a division of the H&K Group, Inc. is looking for 2nd Shift Shop Leader/Mechanic to guide mechanics in the proper repair and servicing of all company owned assets, including electric, diesel, and gasoline industrial trucks and equipment . The ideal candidate is self-motivated, organized, competent, and professional . Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA/MSHA and H&K Safety policies Performs all duties of employees supervised as required Performs repairs, services, inspections, and DVIR Assigns tasks to mechanics Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic maintenance and repair of trucks and equipment Communicates with supervisors and operations personnel in the event of an unscheduled repair requirement that would lead to the loss of use of any truck or piece of equipment Maintains requisitions and supply of spare parts Enforces all company policies and procedures Maintains a safe, clean, non-bias shop Maintains shop to comply with all MSHA and OSHA regulations Maintains all licensed equipment and vehicles to comply with DOT regulations Responsible for all mechanics at that facility Provides a dependable, safe asset repaired in a cost-effective manner Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training Equivalent combinations of education and experience may be considered Two years of supervisory experience Class A or B CDL or ability to obtain within one year Clean driving record State Inspection License Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience 4 years of related experience and/or training State Inspection license Experience working in heavy civil construction, road construction, or quarries OSHA, MSHA, or other relevant safety certifications Physical Demands Frequently required to: Stand, walk, sit Use hands to finger, handle, feel, and grasp Reach with hands and arms Talk or hear Climb, balance, crawl, stoop, crouch, kneel, Lift and/or move up to 75 pounds Work Environment Regularly exposed to: Moving mechanical parts Fumes or airborne particles Occasionally exposed to: Wet/humid conditions Outside weather including extreme cold and heat Risk of electrical shock High, precarious places Noise level is usually moderate The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! PI11449b9edb59-0096
Big E's is a fast-paced, high-energy workplace, with endless opportunities for skill development and advancement. Come join the best team in the Food and Beverage and the Hospitality Industries! Bartender Shifts: 2nd Bartender Wage: $5.75/hr plus tips Bartender Position can be used as a paid internship Bartender Benefits Include: Hotel and restaurant discounts Earned Paid Time Off for ALL Team Members Insurance (health, vision, dental, life) for full time Team Members Flexible schedules Holiday Pay 8 hours of paid volunteer time per year Advancement and professional growth opportunities 100% paid maternity/paternity or adoption leave for those who qualify for FMLA Employee Assistance Program (EAP) through Pine Rest (3 free counseling visits, online library, and access to legal, financial and elder care consultations) Bartender Position Summary: Responsible for the mixing and service of all types of beverages according to standards, as well as taking food orders. Alcoholic beverage service must be done responsibly and according to the law, while following local health department standards, Suburban Inns/Big E's standards, and Suburban Inns' Core Values, as well as going above and beyond to ensure that guests are 100% satisfied. Bartender Essential Functions: Greet all guests in a friendly, positive manner. Ask questions of guests and make personal connections to make them feel they are welcome and valued Ensure all guests requesting alcohol have proper ID and are over 21 years of age Attempt to limit problems and liability related to customers' excessive drinking by taking steps such as persuading customers to stop drinking, or ordering taxis or other transportation for intoxicated patrons Inspect bar prior to shift for adequate supplies Prepare garnishes, set up mixers, and pre-mixed drinks following safety procedures Stock glasses, liquors, beers, and wines Follow setup procedure (well, ice, garnishes) upon opening the bar Mix, prepare, and serve drinks according to the make recipes Collect payment for all checks to be closed Responsible for cash drawer reconciliation Ensure all orders are rung into POS system prior to making Run and cash out keno tickets Responsible for keno cash drawer reconciliation Maintain and clean bar area and equipment Advise supervisor of any complaints as soon as possible, but also follow the One More Step guidelines by taking charge of the issue and offering solutions Request supplies as needed Clean and close down the bar at the end of the night according to procedures Help with monthly cleaning and routine maintenance of bar equipment Follow proper "to-go" order guidelines Follow all Suburban Inns processes Exhibit regular and recurrent attendance records Other duties as requested by management Bartender Position Requirements: Minimum Knowledge: Requires ability to interpret / extract information and /or perform arithmetic functions. Good communication skills Formal Education and Job-Related Experience: None License, Registration, and/or Certification Required: TIPS or ServSafe Alcohol Certification (may be completed upon hire) Work Schedule: Work regularly requires or varies between day, evening, night, holiday, and/or weekend assignments. Schedule varies according to business demands and needs Required Travel: Position does not require travel to other Suburban Inns properties or other locations. Work is completed on property. Bartender Uniform and Appearance Guidelines: Uniform: Uniform shirt and name tag provided. Suburban Inns approved blue jeans (see Uniform Policy) and black, close-toed, non-slip shoes are the responsibility of the Team Member. Appearance: Hair must be kept well-groomed. All facial piercings and tattoos that are not covered by a work uniform must be approved by management. Any tattoo that is deemed offensive to co-workers, guests, vendors or others in the workplace based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive or legally protected nature are not permitted and must remain covered or concealed at all times. This policy will be administered by the position's supervisor, without regard to race, religion, age, sex, national origin, disability, height, weight, genetics, familial status, veteran status, and other protected characteristics. The Vice President of Operations has the authority to veto any decision made by the position's supervisor. Powered by JazzHR Compensation details: 5.75 Hourly Wage PI32c6ee5aaef2-2733
09/02/2025
Full time
Big E's is a fast-paced, high-energy workplace, with endless opportunities for skill development and advancement. Come join the best team in the Food and Beverage and the Hospitality Industries! Bartender Shifts: 2nd Bartender Wage: $5.75/hr plus tips Bartender Position can be used as a paid internship Bartender Benefits Include: Hotel and restaurant discounts Earned Paid Time Off for ALL Team Members Insurance (health, vision, dental, life) for full time Team Members Flexible schedules Holiday Pay 8 hours of paid volunteer time per year Advancement and professional growth opportunities 100% paid maternity/paternity or adoption leave for those who qualify for FMLA Employee Assistance Program (EAP) through Pine Rest (3 free counseling visits, online library, and access to legal, financial and elder care consultations) Bartender Position Summary: Responsible for the mixing and service of all types of beverages according to standards, as well as taking food orders. Alcoholic beverage service must be done responsibly and according to the law, while following local health department standards, Suburban Inns/Big E's standards, and Suburban Inns' Core Values, as well as going above and beyond to ensure that guests are 100% satisfied. Bartender Essential Functions: Greet all guests in a friendly, positive manner. Ask questions of guests and make personal connections to make them feel they are welcome and valued Ensure all guests requesting alcohol have proper ID and are over 21 years of age Attempt to limit problems and liability related to customers' excessive drinking by taking steps such as persuading customers to stop drinking, or ordering taxis or other transportation for intoxicated patrons Inspect bar prior to shift for adequate supplies Prepare garnishes, set up mixers, and pre-mixed drinks following safety procedures Stock glasses, liquors, beers, and wines Follow setup procedure (well, ice, garnishes) upon opening the bar Mix, prepare, and serve drinks according to the make recipes Collect payment for all checks to be closed Responsible for cash drawer reconciliation Ensure all orders are rung into POS system prior to making Run and cash out keno tickets Responsible for keno cash drawer reconciliation Maintain and clean bar area and equipment Advise supervisor of any complaints as soon as possible, but also follow the One More Step guidelines by taking charge of the issue and offering solutions Request supplies as needed Clean and close down the bar at the end of the night according to procedures Help with monthly cleaning and routine maintenance of bar equipment Follow proper "to-go" order guidelines Follow all Suburban Inns processes Exhibit regular and recurrent attendance records Other duties as requested by management Bartender Position Requirements: Minimum Knowledge: Requires ability to interpret / extract information and /or perform arithmetic functions. Good communication skills Formal Education and Job-Related Experience: None License, Registration, and/or Certification Required: TIPS or ServSafe Alcohol Certification (may be completed upon hire) Work Schedule: Work regularly requires or varies between day, evening, night, holiday, and/or weekend assignments. Schedule varies according to business demands and needs Required Travel: Position does not require travel to other Suburban Inns properties or other locations. Work is completed on property. Bartender Uniform and Appearance Guidelines: Uniform: Uniform shirt and name tag provided. Suburban Inns approved blue jeans (see Uniform Policy) and black, close-toed, non-slip shoes are the responsibility of the Team Member. Appearance: Hair must be kept well-groomed. All facial piercings and tattoos that are not covered by a work uniform must be approved by management. Any tattoo that is deemed offensive to co-workers, guests, vendors or others in the workplace based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive or legally protected nature are not permitted and must remain covered or concealed at all times. This policy will be administered by the position's supervisor, without regard to race, religion, age, sex, national origin, disability, height, weight, genetics, familial status, veteran status, and other protected characteristics. The Vice President of Operations has the authority to veto any decision made by the position's supervisor. Powered by JazzHR Compensation details: 5.75 Hourly Wage PI32c6ee5aaef2-2733
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! 2nd Shift Maintenance - Must be able to weld US-PA-Douglassville Job ID: Type: Regular Full-Time Category: Quarry Douglassville Quarry Overview Douglassville Quarry, a division of H&K Group, Inc., is looking for a Maintenance person to support production and maintenance of the quarry. The ideal candidate is safety focused, action oriented, pays attention to detail, and excels at teamwork. Must be able to torch/weld. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work according to MSHA and H&K Safety policies Perform plant maintenance Maintain clean work areas including catwalks, walk-ways and general plant area Proactively learn plant functions and operations Obtain all knowledge to complete assigned tasks Take direction from and work in a team with all other site personnel Cross train to learn all jobs of plant and be able to substitute when necessary Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR related experience and/or training A combination of education and experience may be considered Effective verbal and written communication Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Must be able to weld/toch Preferred Skills, Education, and Experience 3+ months related experience Experience operating heavy equipment Strong preference for Loader operation experience Experience working in a quarry, heavy civil construction, or other outdoor industrial setting MSHA or other relevant safety certification Physical Demands Regularly required to stand and walk Frequently required to: Use hands to finger, handle, or feel Reach with hands and arms Climb, balance, stoop, kneel, crouch, or crawl Talk or hear Occasionally required to sit Lift and/or move up to 25 pounds regularly, up to 50 pounds frequently, and up to 100 pounds occasionally Specific vision needs include depth perception and ability to adjust focus Work Environment Regularly exposed to Moving mechanical parts Outside weather conditions Frequently exposed to High, precarious places Fumes or airborne particles Vibration Occasionally exposed to risk of electrical shock Noise level is usually loud The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical PI7db9c9e70c91-6494
09/02/2025
Full time
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! 2nd Shift Maintenance - Must be able to weld US-PA-Douglassville Job ID: Type: Regular Full-Time Category: Quarry Douglassville Quarry Overview Douglassville Quarry, a division of H&K Group, Inc., is looking for a Maintenance person to support production and maintenance of the quarry. The ideal candidate is safety focused, action oriented, pays attention to detail, and excels at teamwork. Must be able to torch/weld. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work according to MSHA and H&K Safety policies Perform plant maintenance Maintain clean work areas including catwalks, walk-ways and general plant area Proactively learn plant functions and operations Obtain all knowledge to complete assigned tasks Take direction from and work in a team with all other site personnel Cross train to learn all jobs of plant and be able to substitute when necessary Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR related experience and/or training A combination of education and experience may be considered Effective verbal and written communication Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Must be able to weld/toch Preferred Skills, Education, and Experience 3+ months related experience Experience operating heavy equipment Strong preference for Loader operation experience Experience working in a quarry, heavy civil construction, or other outdoor industrial setting MSHA or other relevant safety certification Physical Demands Regularly required to stand and walk Frequently required to: Use hands to finger, handle, or feel Reach with hands and arms Climb, balance, stoop, kneel, crouch, or crawl Talk or hear Occasionally required to sit Lift and/or move up to 25 pounds regularly, up to 50 pounds frequently, and up to 100 pounds occasionally Specific vision needs include depth perception and ability to adjust focus Work Environment Regularly exposed to Moving mechanical parts Outside weather conditions Frequently exposed to High, precarious places Fumes or airborne particles Vibration Occasionally exposed to risk of electrical shock Noise level is usually loud The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical PI7db9c9e70c91-6494
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! 2nd Shift Plant Operator US-PA-Narvon Job ID: Type: Regular Full-Time # of Openings: 1 Category: Quarry Silver Hill Quarry Overview Silver Hill Quarry, a division of The H&K Group, Inc. is looking for the ideal 2nd Shift Plant Operator! The plant operator provides smooth operation of plant equipment by performing the following duties: Great benefits including 100% paid medical insurance for you and your family! Responsibilities Essential Abilities, Duties, and Responsibilities: Perform all work according to company safety policies and MSHA policies. Know and follow company start and stop procedures. Performs daily greasing and oil checks on crushers and screens. Keeps walkways clear of any debris and reports spillage issues to superintendent. Performs daily guarding inspections and plant checks and reports any maintenance issues to superintendent. Inspects screen media to ensure proper condition for maximum production. Keeps operating booth clean and free from any inappropriate materials. Carries out duties and work procedures to meet production schedules. Suggests changes in working conditions and use of equipment to increase efficiency of quarry operations and work crew. When needed/required assists workers in solving production problems. Fills out necessary paperwork daily. H&K provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Comprehensive Benefits Offered! PI27107afb4cd0-4856
09/02/2025
Full time
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! 2nd Shift Plant Operator US-PA-Narvon Job ID: Type: Regular Full-Time # of Openings: 1 Category: Quarry Silver Hill Quarry Overview Silver Hill Quarry, a division of The H&K Group, Inc. is looking for the ideal 2nd Shift Plant Operator! The plant operator provides smooth operation of plant equipment by performing the following duties: Great benefits including 100% paid medical insurance for you and your family! Responsibilities Essential Abilities, Duties, and Responsibilities: Perform all work according to company safety policies and MSHA policies. Know and follow company start and stop procedures. Performs daily greasing and oil checks on crushers and screens. Keeps walkways clear of any debris and reports spillage issues to superintendent. Performs daily guarding inspections and plant checks and reports any maintenance issues to superintendent. Inspects screen media to ensure proper condition for maximum production. Keeps operating booth clean and free from any inappropriate materials. Carries out duties and work procedures to meet production schedules. Suggests changes in working conditions and use of equipment to increase efficiency of quarry operations and work crew. When needed/required assists workers in solving production problems. Fills out necessary paperwork daily. H&K provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Comprehensive Benefits Offered! PI27107afb4cd0-4856
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". Role and Responsibilities This position is accountable for supporting field operations at assigned project location. Employees operate a variety of friction or hydraulic lattice boom cranes ranging from 50 ton to 150 ton in the construction or repair of barges, boats, and/or ferries. Works as assigned by the Project Manager and/or Barge Repair Supervisor(s) to assist the project team in ensuring timely and successful completion of Barge Repair project. Typically, they will work closely with Welders, Laborers, and/or other skilled or semi-skilled craft workers. Night Shift will train during the day shift for the first few weeks. Must be available for overtime and weekends Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Operates assigned heavy equipment in a safe and effective manner to minimize the risk of injury, property damage, or loss of life. Maneuvers and positions loads over designated areas in a smooth, safe manner. Utilizes load charts to ensure lifts are performed within the determined load and radius capabilities of the crane. Assists in the assembly and disassembly of the crane installation of boom and hoisting cables on the crane. Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment. Performs daily equipment inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.; Advises Foreman of any requirements for maintenance or repairs. Ensures that crane is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation. Ensures the crane has adequate ground bearing capacity to ensure the stability of the crane throughout lifting activities. Is responsible for all rigging and the method in which loads are rigged. Works closely with site management and workers to complete projects in a safe, efficient, and timely manner. Performs crane operator duties and rigging functions associated with lifting operations. Makes precise load placements where exact movements are necessary to position the load accurately and safely under complex and adverse conditions. Works with and assists crew in excavation activities which may include hoisting material, tools, equipment, and/or any related work. Performs other related duties as assigned. Participates in Safety and Environmental initiatives that will contribute to compliance of State/Federal regulations and improve existing Company programs. Responsible and accountable for employee's own personal safety, as well as the safety of all co-workers and any others employee encounters. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed; Alerts Foreman, Safety Officer, or Human Resources to observed safety issues. This position may require long hours and weekend work. Qualifications and Education Requirements 3-5 years' experience operating hydraulic cranes required; High school diploma or equivalent; or minimum of three (3) years' related experience and/or training, or equivalent combination of experience, education, and/or training which provides the necessary crane operator skills, knowledge and abilities is required. The employee must: Demonstrate ability to operate equipment in a safe and responsible manner. Demonstrate knowledge of construction rigging standards: use of slings, cable chokers, spreader bars, multi-part load blocks, etc. Demonstrate ability to read, understand and use crane load charts to determine load and radius capabilities of assigned equipment. Demonstrate ability to follow instructions and make decisions based on safety and operational standards of assigned equipment. Demonstrate ability to read and write. Competencies: Stress management/Composure, Communication proficiency, Teamwork orientation, Results driven Knowledge of proper use of equipment, materials, and supplies used on Barge Repair projects. Demonstrated ability to problem-solve and draw conclusions. Working knowledge of Shipyard operations preferred. Preferred Skills PHYSICAL/MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The employee frequently works near moving mechanical parts, and regularly works in outside weather conditions. The individual must properly utilize appropriate personal protective equipment (PPE) as required. This includes hard hat, safety glasses, reflective vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being conducted. In addition, Crane Operators must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Accessing and exiting machines safely. Standing, stooping, bending, crouching, kneeling, squatting, climbing, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing vertical ladders of a height of 6ft or greater. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; 20/20 vision (naturally or with corrective lenses). Must be able to pass Crane Operator Physical. PI1ed988f85fb1-5768
09/01/2025
Full time
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". Role and Responsibilities This position is accountable for supporting field operations at assigned project location. Employees operate a variety of friction or hydraulic lattice boom cranes ranging from 50 ton to 150 ton in the construction or repair of barges, boats, and/or ferries. Works as assigned by the Project Manager and/or Barge Repair Supervisor(s) to assist the project team in ensuring timely and successful completion of Barge Repair project. Typically, they will work closely with Welders, Laborers, and/or other skilled or semi-skilled craft workers. Night Shift will train during the day shift for the first few weeks. Must be available for overtime and weekends Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Operates assigned heavy equipment in a safe and effective manner to minimize the risk of injury, property damage, or loss of life. Maneuvers and positions loads over designated areas in a smooth, safe manner. Utilizes load charts to ensure lifts are performed within the determined load and radius capabilities of the crane. Assists in the assembly and disassembly of the crane installation of boom and hoisting cables on the crane. Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment. Performs daily equipment inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.; Advises Foreman of any requirements for maintenance or repairs. Ensures that crane is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation. Ensures the crane has adequate ground bearing capacity to ensure the stability of the crane throughout lifting activities. Is responsible for all rigging and the method in which loads are rigged. Works closely with site management and workers to complete projects in a safe, efficient, and timely manner. Performs crane operator duties and rigging functions associated with lifting operations. Makes precise load placements where exact movements are necessary to position the load accurately and safely under complex and adverse conditions. Works with and assists crew in excavation activities which may include hoisting material, tools, equipment, and/or any related work. Performs other related duties as assigned. Participates in Safety and Environmental initiatives that will contribute to compliance of State/Federal regulations and improve existing Company programs. Responsible and accountable for employee's own personal safety, as well as the safety of all co-workers and any others employee encounters. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed; Alerts Foreman, Safety Officer, or Human Resources to observed safety issues. This position may require long hours and weekend work. Qualifications and Education Requirements 3-5 years' experience operating hydraulic cranes required; High school diploma or equivalent; or minimum of three (3) years' related experience and/or training, or equivalent combination of experience, education, and/or training which provides the necessary crane operator skills, knowledge and abilities is required. The employee must: Demonstrate ability to operate equipment in a safe and responsible manner. Demonstrate knowledge of construction rigging standards: use of slings, cable chokers, spreader bars, multi-part load blocks, etc. Demonstrate ability to read, understand and use crane load charts to determine load and radius capabilities of assigned equipment. Demonstrate ability to follow instructions and make decisions based on safety and operational standards of assigned equipment. Demonstrate ability to read and write. Competencies: Stress management/Composure, Communication proficiency, Teamwork orientation, Results driven Knowledge of proper use of equipment, materials, and supplies used on Barge Repair projects. Demonstrated ability to problem-solve and draw conclusions. Working knowledge of Shipyard operations preferred. Preferred Skills PHYSICAL/MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The employee frequently works near moving mechanical parts, and regularly works in outside weather conditions. The individual must properly utilize appropriate personal protective equipment (PPE) as required. This includes hard hat, safety glasses, reflective vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being conducted. In addition, Crane Operators must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Accessing and exiting machines safely. Standing, stooping, bending, crouching, kneeling, squatting, climbing, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing vertical ladders of a height of 6ft or greater. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; 20/20 vision (naturally or with corrective lenses). Must be able to pass Crane Operator Physical. PI1ed988f85fb1-5768