283 jobs found

Position: Field Service Technician Position Type: Full-time, Non-Exempt, Hourly Reports To: Field Services Site Leads Location: Remote Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing This role requires being out in the field on client project sites. The projects involve the installation, testing, and commissioning of a modular cooling system at sites in Texas, Idaho, Alabama, South Carolina and Ohio. This position requires flexibility to travel around the country. Travel time is approximately 70-75%. The Field Service Technician will provide responsive electrical, mechanical and automation support for chilled water systems and ancillary components through analysis, troubleshooting, remediation, implementation, commissioning and testing. As a direct point of contact for our customers, this role will drive customer satisfaction, maximize customer retention and increase profitability in a field environment without direct supervision. Essential Functions Providing on hand support during hydro-testing & flushing to address leaks as they develop, re-torquing flanges and mechanical connections as needed Troubleshooting mechanical equipment, such as valves, and at times performing replacement Perform repair welds on as needed basis Familiarity with pipefitting and the ability to read and interpret piping schematics and blueprints. Read and interpret engineered drawings (P&ID's, loop sheets, wiring schematics, electrical one-lines, PLC ladder logic, etc.) Operate all standard service tools and electrical testing equipment (multimeters, voltmeters, megohmmeters, etc.) Calibrate, troubleshoot and monitor variable frequency drives and 0-10V/4-20mA instrumentation Perform moderately complex chilled water system start-ups Set up VFD parameters for proper interface and operation Performing any site installation of auxiliary piping & equipment What We're Looking For Must Have's: Proven experience in installing and commissioning modular cooling systems. Minimum 3 years previous experience with piping and welding (techniques such as TIG, MIG, and stick welding) in HVAC or modular systems. Knowledge of various piping materials (e.g., steel, copper, PVC) and their applications. Ability to perform precise measurements and cuts for piping installations. Ability to diagnose and troubleshoot issues related to piping and welding. Proficiency in using welding and pipefitting tools and equipment (threader, reaming and cutting, tap & die, etc.) Proficiency with working on Victaulic piping Knowledge of piping instrumentation and in line devices Prior experience with motors, control systems and motor control centers (up to 4160V, 3 phase) Prior experience calibrating and troubleshooting industrial instrumentation (pressure, temperature, flow) Ability to operate forklifts, scissor lifts and boom lifts Proficiency in Microsoft Office OSHA 30 with a strong safety record NFPA70e LOTO certification Relevant State Certifications and Licenses Knowledge of king span or metal span panels and flashing Must be authorized to work in the United States and have a current passport. Must have a valid driver's license and be able to obtain TWIC Experienced in preparing daily field reports through Autodesk or similar construction management tools Experienced in navigating the demands and responsibilities of active construction environments. Nice to Have: Familiar with Rockwell Automation ABB, VFD Drive, Rockwell Automation PLC and HMI vocational training with emphasis on industrial instrumentation Rockwell Automation certification ISA certification Certified Control Systems Technician (CCST) registration or completion of relevant training courses Experience with PLC Programming Logic (Allen Bradley and Siemens) Previous equipment startup and commissioning experience Microsoft certifications for Rockwell products and other relevant applications What We Offer Travel Per Diem Pay for lodging and food Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off. 10-Paid holidays a year. Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership Tuition Assistance What Hours You Will Work Overtime may be necessary as workload dictates. This may include weekdays, weekends or holidays. Work Conditions This position operates mainly in a construction site and operating industrial plant environment. The technician must comply with safety policies, practices and procedures at all times. Work is primarily done in the field which could be in a construction area requiring use of earplugs, hardhat, steel-toe boots and safety glasses. The work environment could be outdoors, hot or cold, noisy and/or dirty. Physical Demands The technician must be able to work effectively in a construction environment for system testing including climbing ladders and moving around on platforms to maneuver in and around equipment. The technician must also occasionally lift and/or move up to 50 pounds. The technician must be able to see and read printed materials, speak and comprehend verbal communication, operate a computer, travel including flying as well as driving long distances, work in confined spaces, stand for long periods of time and walk on uneven surfaces. PIb6b4adf5fe78-0957

Position Title: Field Technician / Installer - Sacramento, CA Location: Dixon, CA 95620, USA• Davis, CA, USA• Sacramento, CA, USA Req. ID: 72 Join our Team and Make a Difference! At Lifeway Mobility, we believe that everyone deserves to live comfortably, independently, and safely in their own homes. As a leading nationwide provider of accessibility solutions, we are dedicated to enabling individuals with accessibility needs to remain in the place they love. We are more than just a company - we are a community driven by our Core Values of Putting People First, Being Accountable, and Doing Well While Doing Good. These principles guide everything we do, from the products we offer to the way we interact with our customers and each other. Joining our team means becoming part of a highly engaged workforce where you will have access to training opportunities, growth potential, and a comprehensive benefits plan. Whether you're starting your career or looking to take the next step, Lifeway Mobility offers a supportive environment where you can thrive and make a difference. Exciting Career Opportunity - Join a Growing Company and Make a Difference! Are you looking for a career that combines hands-on work, the chance to learn new skills, and the opportunity to make a real impact in people's lives? If you have mechanical experience to include working with power and hand tools and a desire to grow and learn- we want to talk to you! Lifeway Mobility is growing rapidly, and we're looking for passionate individuals to join our team in California. No matter your background, we'll provide the training you need to install life-changing accessibility products, such as wheelchair ramps, stair lifts, elevators, and more! Why Lifeway Mobility? Training provided : Gain specialized skills and become a vital part of a team that makes a meaningful difference in people's lives. New Location : We are expanding and need motivated individuals to help us grow our territory throughout Sacramento. Career growth : We're growing fast, and we want you to grow with us. What Your Day Will Look Like: Installation & Repair : Install and repair accessibility products like wheelchair ramps, stair lifts, and ceiling lifts, helping people with impaired mobility live independently in their own homes. Customer Interaction : Explain project details to customers and answer their questions to ensure their satisfaction. On-the-Job Training : Receive training directly from manufacturers and hands-on experience in the field-on paid time! Travel & Teamwork : daily use of the company vehicle (no wear and tear on your vehicle!) and opportunity to work independently in Sacramento. What We Offer: Competitive Pay & Benefits : Enjoy great pay, health benefits, paid time off, and a cell phone allowance. Incentive Bonuses : Get rewarded for your hard work. Job Growth : We're expanding, which means growth opportunities for you! About Lifeway Mobility: At Lifeway Mobility, we're dedicated to providing innovative accessibility solutions that enable seniors and individuals with disabilities to live independently in their own homes. We're not just about selling products; we focus on understanding each customer's unique needs and delivering customized solutions that improve their quality of life. What We're Looking For: Experience : Experience working with your hands in any mechanical field; for example, auto mechanic, electrical background (low voltage), solar, HVAC. Tool Skills : Proficiency with hand and power tools. Customer Service : Strong communication skills and a focus on customer satisfaction. Tech-Savvy : Basic computer skills for entering data. Requirements : High school diploma/GED, ability to pass a drug test, background check, and motor vehicle record check. Physical Ability : Able to lift 75+ lbs, work in all weather conditions, climb ladders, and occasionally work in confined spaces or at heights. Ready to build a career and make a difference? Apply today to join Lifeway Mobility and help people stay in their homes and live their best lives! At Lifeway Mobility, we care about our employees' well-being. Join our team and enjoy a comprehensive benefits package that includes medical, dental, vision, 401k, employer paid life and LTD and some voluntary benefits too. We set you up for success at the start- with our Academy, which includes virtual and in person training, ongoing support, and the opportunity to grow, either in your role, or into a new role. Plus, you'll have the opportunity to relax and recharge with 7 paid holidays and three weeks of PTO. Apply now to be a part of our team. Ready to elevate your career with us? Lifeway Mobility is an Equal Opportunity Employer Job Details Pay Type: Hourly Hiring Min Rate: 24 USD Hiring Max Rate: 27 USD Travel Required: Yes Compensation details: 24-27 Hourly Wage PI97ab06ce518f-9242

About Us Keystone Management is directed by experienced professionals. From managing the world's busiest airport and biggest airline, to managing the largest cereal manufacturing facility, our experience in specialized, technical industrial, facility, and aviation services are second to none. We provide various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets. JOB SUMMARY The Facilities Maintenance Technician III, under supervision, is responsible for performing essential preventive maintenance and repair of building plumbing, mechanical, electrical, and control systems, including refrigeration, and A/C units at the hangar and terminal locations. Location: Logan International Airport (BOS) Boston, MA Shift: 2:00 PM-10:30 PM Hourly Range: $32.00-36.00 Per Hour ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Repair, maintain/monitor all equipment and amenities. Diagnose equipment issues and assist in the diagnosis of process-related problems through collaborative teamwork. Change all filters for HVAC as required. Change light bulbs, interior and exterior, as needed. Use computer-based CMMS system to create and closeout work orders with data including labor hours, equipment maintenance and parts used. Carry a company radio/cell phone for coverage and site-wide communication. Available to work flexible hours. Available for an assigned emergency on-call schedule. Assists/Escort outside service personnel, inspectors and vendors. Keeps workspace neat, clean and free of clutter. Understand and comply with OSHA, Safety and PPE requirements. Performs other work-related duties as assigned. KNOWLEDGE, SKILLS, AND EDUCATION HS Diploma or Equivalent Certification in a skilled trade or system is a must Experience performing preventative maintenance (PM's) on equipment Experience fitting industrial piping systems with materials such as, PVC, copper, stainless steel instrument tubing is a plus Experience with steam systems and heat exchanges is preferred Strong customer service skills Excellent communication skills Strong problem-solving skills Detail oriented Commercial Carpentry experience is a plus ATTRIBUTES FOR SUCCESS Willing to go above and beyond Takes pride in their appearance High level of professionalism Ability to work in a fast-paced environment and perform well under pressure Adaptable Positive attitude Willingness to share knowledge with team members, supervisors, and customer Self-discipline Reliable WORKING CONDITIONS, TRAVEL, PHYSICAL REQUIREMENTS This is a full-time position, 40 hours per week, with additional hours as needed to address the needs of the customer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions/physical requirements of the job. Additional requirements are as follows: Ability to stand for long periods Ability to walk on level, uneven and slippery surfaces Ability to frequently reach, twist, turn, kneel, bend, squat and stoop Ability to operate office equipment, computer and tools Correctable vision and hearing Ability to walk long distances within the airport Ability to regularly lift, drag, carry and push equipment, tools and supplies up to 75 pounds Ability to climb ladders Ability to function in high-pressure situations Ability to drive a vehicle Exposure to mechanical, electrical and noise hazards Exposure to inclement weather conditions SECURITY REQUIREMENTS Pass a drug test Pass a Keystone Management background check Pass a Federal Aviation Administration background check Pass a driving history check Possess a current driving license Flexible and reliable for all shifts to support projects and client EOE Statement Keystone Management is an Equal Opportunity/Affirmative Action employer. It is our policy to employ qualified applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, genetic information, or other protected status. E-Verify Company Information Keystone Management, LLC participates in the Federal Government E-Verify Program, an internet-based system that allows businesses to determine the eligibility of their employees to work in the United States. Powered by JazzHR Compensation details: 32-36 Hourly Wage PI39d8ae0edddb-4850

Description: At H.O. Bostrom, we've been designing and manufacturing precision-engineered seating solutions for over 75 years. As a global leader in ergonomic seating systems for industries ranging from fire and rescue to marine, military, and healthcare, we take pride in crafting products that keep people safe and comfortable on the job. But what truly sets us apart is our commitment to people - both our customers and our team. We foster a collaborative, respectful, and inclusive workplace where your ideas matter and your growth is supported. If you're passionate about problem-solving, innovation, and making a real impact, H.O. Bostrom is the place to build a meaningful career. Job Summary: The maintenance technician will perform a wide variety of maintenance tasks pertaining to the general upkeep and maintenance of both equipment and the building. This position will troubleshoot equipment breakdowns and perform scheduled maintenance procedures. In addition, the maintenance technician will perform light mechanical work such as repairing hand tools, minor plumbing and light carpentry work. This position will be called on to do miscellaneous indoor and outdoor projects, cleaning and repairs as necessary. Essential Duties: Maintain preventive maintenance schedules and task lists for all production equipment Servicing and repair of hand tools and minor floor machines Building maintenance and repairs, including drywall, paint, doors, locks, racks, equipment and restroom upkeep. External building maintenance such as snow removal or landscaping. Trash and cardboard removal as needed Ensure regulatory requirements are performed and met for water and air discharge quality Maintain light bulbs, HVAC filters, door and window functions Assemble, install, disassemble and relocate workstation equipment and furnishings as needed Clean and organize multiple areas of the facility Participate in continuous improvement activities All other duties as assigned Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee will be working both inside and outside of the manufacturing plant and is required to walk, stand, bend, and lift up to 60 pounds on an infrequent basis. This position will also stoop, bend or reach above the shoulders. Requirements: High School Diploma or GED 1 year work experience in industrial maintenance 1 year work experience working with mechanical, electrical, and pneumatic tools and equipment Forklift certification, preferred Prior experience with preventative maintenance tracking, preferred Prior experience maintaining robotic welding equipment, preferred Knowledge, Skills, and Abilities: Basic computer experience Knowledge of general OSHA safety standards and regulations Ability to read labels and work instructions Ability to work independently to troubleshoot problems as well as in a team environment Ability to perform basic math functions, including addition, subtraction, multiplication, and division Ability to communicate effectively, both verbally and in writing Ability to work with minimal supervision and self-motivate Compensation details: 23-26 Hourly Wage PI7db020e92fb6-1193

Description: Job Summary We're looking for a skilled HVAC Technician who specializes in replacing and installing major components like coils and compressors in residential systems. In this role, you'll handle the heavy-hitting repairs that keep systems running at their best, while also stepping in to assist with service and maintenance calls when needed. This position is perfect for a technician with strong technical expertise, attention to detail, and a commitment to doing quality work the right way. Key Responsibilities Install, replace, and service residential HVAC coils and compressors to manufacturer specifications and company standards. Diagnose issues with coils, compressors, and refrigerant lines, ensuring long-term system reliability. Perform brazing, soldering, and piping modifications as required. Conduct evacuations, charging, and system performance testing. Follow all local, state, and federal codes as well as company safety policies. Keep detailed records of work performed, parts used, and site conditions. Communicate clearly with customers, supervisors, and team members about job progress and findings. Maintain organized tools, equipment, and workspaces. Qualifications High school diploma or equivalent required; HVAC trade school or technical training preferred. 2+ years of HVAC installation or service experience, with a focus on coils and compressors. EPA Section 608 Certification required. Strong understanding of the refrigeration cycle, electrical components, and safety standards. Skilled in brazing, soldering, and using HVAC diagnostic tools/meters. Excellent troubleshooting and problem-solving abilities. Experience with ServiceTitan or similar HVAC software is a plus. Valid driver's license and clean driving record. Physical Requirements Able to lift 50+ lbs and perform physical tasks such as climbing, bending, and standing for long periods. Comfortable working outdoors and in tight spaces. Benefits Medical, dental and vision insurance FSA with debit card Employer-paid Short-Term Disability (STD) $20K in life insurance and $20K AD&D insurance 401(k) employer match Paid Vacation PTO Paid Holidays Annualized reviews for merit increases Potential for advancement About Our Company: Texas Ace Heating & Air is the premier heating, and air-conditioning company located in Midlothian, Texas, serving all of the Dallas / Fort Worth area and surrounding cities. Our purpose is to provide our internal peers and external customers with unparalleled service, quality products and outstanding care. Our belief is that if you take care of the best, you will keep the best - which is why we provide the most competitive compensation packages and provide full-time positions YEAR ROUND! We are eager to provide you with a great opportunity - one where you can make a difference! The company is backed by The Sterling Group, a private equity firm established in 1982. The Sterling Group specializes in acquiring controlling interests in companies across the manufacturing, distribution, and industrial services sectors, focusing on enterprises with valuations typically between $100 million and $1 billion. To date, the firm has sponsored 67 platform buyouts, along with numerous add-on acquisitions, contributing to a total transaction value exceeding $22 billion. Currently, The Sterling Group manages over $9.4 billion in assets. Requirements: PI6a4f2c19c40d-0441

Join the Keystone Community We are changing the world, one world at a time, by providing various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets . What You'll Do As the on-site Facilities Manager you will function as a strategic partner to the airport's operations team, translating their service priorities into clear maintenance actions that protect the passenger experience. You will lead and develop a 19-person technical workforce responsible for passenger boarding bridges, baggage handling system, HVAC, plumbing, electrical, mechanical systems, and life-safety equipment, setting measurable KPIs and coaching the team to meet or exceed them. In this role, you will oversee the installation, maintenance, and repair of all critical mechanical, electrical, plumbing, HVAC, and safety systems. You will manage and audit third-party vendors to ensure contract compliance and quality standards, driving cost-effective results, as well as m onitoring budgets and implementing cost-effective strategies to maximize value . Through regular walk-throughs and clear, timely reporting to both the client and Keystone leadership, you will help maintain a safe, efficient, and welcoming environment for passengers, employees, and stakeholders. What Makes You the Perfect Fit Education & Experience Bachelor's degree in facility management, engineering, or a related field-or equivalent experience 7+ years in facilities management, including hands-on MEP systems experience 5+ years of team leadership and supervisory experience Proficiency in Microsoft Office (PowerPoint, Excel) and familiarity with CMMS and construction management software Must have led more than 18 people at one time. Must have led highly skilled and medium skilled technicians. Must have managed complex and multi-facet facilities such as airports, hospitals, data centers and/or university systems. Must have dealt with all types of clients, good and challenging. Must have experience with major pieces of commercial facility assets Certifications • Certified Facility Manager (CFM) or Facility Management Professional (FMP) preferred Salary Transparency Statement The pay range for this position is $130,000-150,000 annually. The actual compensation will be based on a variety of factors including experience, skills, certifications, and location. Keystone Management, LLC is committed to pay transparency and equity across all roles. PRE-EMPLOYMENT REQUIREMENTS Upon receiving a contingent offer of employment, the selected candidate must comply with the following as a condition of employment: Successfully pass a background check with Keystone Management, LLC and the Federal Aviation Administration. Successfully pass the Ronald Reagan National Airport SIDA badge and drivers test within two tries. Valid driver's license and a MVR driving history check required. What You'll Get We offer more than just a job. At Keystone Management, LLC, you'll enjoy industry-leading benefits, a positive and collaborative work environment, and a competitive salary. Plus, you'll get your birthday off! Here's what you'll enjoy as part of our team: Competitive Salary 401(k) with company match Comprehensive health, dental, and vision insurance Paid time off, including your birthday off Life, short-term, and long-term disability insurance Professional development opportunities EOE Statement Keystone Management, LLC is an Equal Opportunity/Affirmative Action employer. It is our policy to employ qualified applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, genetic information, or other protected status. E-Verify Company Information Keystone Management, LLC participates in the Federal Government E-Verify Program, an internet-based system that allows businesses to determine the eligibility of their employees to work in the United States . Powered by JazzHR Compensation details: 00 PIefed-3053

Description: Summary The Floating Maintenance Technician is responsible for the overall maintenance of the physical plants, under the direction of the Maintenance Directors. Essential Duties and Responsibilities Include the following. Other duties may be assigned. MUST BE HVAC CERTIFIED Must be skilled in all aspects of Maintenance. Perform electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc. Perform plumbing work such as cleaning stoppages, replacing fittings, etc. Replace broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, draperies and locks. Paint, interior and exterior. Perform carpentry work such as fitting doors, freeing windows, replacing and building shelves, sanding and refinishing floors. Train other staff members. Assist the resident manager in scheduling annual apartment inspections. Be responsible for refurbishing of apartments prior to resident occupancy. Perform scheduled maintenance on all equipment based on the manufacturers recommendations and operating manuals. Periodically inspect all units, buildings and common areas, performing repairs and janitorial assistance as scheduled. Have knowledge regarding contracts and suppliers, their services, goods and prices. Assist in apartment follow-up inspections. Must be flexible and able to adapt to a variety of property types. Some travel required. Requirements: Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); 5 years of prior maintenance experience, preferable Supervisor experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Must be able to read and write English. Must have good communication skills. Mathematical Skills Must show basic understanding of math. Certificates, Licenses, Registrations Must have a valid driver's license, reliable means of transportation, and be insurable. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Must be able to climb stairs and ladders and reach heights of 8 feet with the aid of a ladder. No fear of heights (24 feet or more). The employee must regularly lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works in outside weather conditions and is frequently exposed to risk of electrical shock. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. At Freeman Webb, we're not just offering a job, but a fulfilling career in property management. We believe in the power of teamwork and prioritize a supportive work environment where collaboration thrives. Our brand value, "Support Each Other, Above all We're a Team," sets the tone for how we operate. We are committed to working together, empowering one another, and fostering an atmosphere where everyone's opinion and feedback are valued. In addition to a fulfilling work culture, we provide our employees with competitive benefits, including a 401K plan, paid time off, and other valuable perks. We understand the importance of work-life balance and strive to create an environment where our employees can thrive both personally and professionally. When you join Freeman Webb, you become part of a family. We believe in promoting from within and nurturing the growth of our teams. Professional development and consistent training are at the core of our approach, ensuring that our employees have the tools and knowledge to excel in their roles. We celebrate our collective achievements and recognize the contribution of our diverse teams, which has earned us the honor of being named a Top Workplace in multiple cities year after year. If you are seeking a career that offers growth, a supportive team environment, and the opportunity to make a difference, join us at Freeman Webb Company. Together, we inspire each other to take ownership of our actions and create a positive impact. Apply today and embark on a rewarding journey with us. PId0b15a980b1a-4777

Location: North Canton , OH About Redwood: At first glance, Redwood Living, Inc. (Redwood) is a company that builds and manages single-story apartment homes. But when you look closer, you'll see we are so much more. We are builders, innovators, and individuals who go the extra mile. Our success is driven by the incredible people who make up our workforce. Our Redwood Ambassadors are not only passionate and talented but also empowered to make decisions that enhance the lives of our residents and their fellow employees. Join us and be part of a team that values creativity, dedication, and the power to make a difference. We live by eight core values that guide everything we do: • Do One Thing Really Well • Be Entrepreneurial • Serve Those You Lead • Deliver More Than Expected • Communicate Openly and Honestly • Instill Family and Team Spirit • Demonstrate Integrity and Authenticity • Be Nice and Have Fun Position Overview: Each Redwood Neighborhood has an Apartment Maintenance Technician whose primary responsibilities involve performing routine and general maintenance on the facilities, buildings, and equipment on site, plus performing certain groundskeeping tasks. Daily responsibilities include utilizing various power tools, completing unit turns, and troubleshooting appliances. An aspect of the Apartment Maintenance Technician role involves customer service and communication with both residents and fellow employees. This role will be expected to act as a Redwood ambassador and always provide a positive employee and resident experience. Service Technicians enter residents' homes to complete work orders and will be expected to handle repairs and communications in a manner that promotes the best possible experience for residents. Duties & Responsibilities: Maintain and repair facilities, buildings, and grounds as assigned through work orders Prepare vacated apartment homes for release quickly and professionally Complete minor plumbing, electrical, carpentry, painting, and drywall tasks Minor plumbing system repairs (clearing drains, toilet issues, repair/replace water heaters) Service kitchen appliances, washers, dryers, and garage issues when necessary Emergency maintenance as part of an on-call emergency schedule Follow safety standards at all times Snow removal All other related duties as assigned Required Qualifications: 1 year of general maintenance experience Valid driver's license High school diploma or equivalent Preferred Qualifications: HVAC Certification Exceptional customer service skills Apartment maintenance experience Ability to operate smartphone, tablet, and computers Physical Requirements: Ability to Lift up to 50 pounds frequently, lift up to 100 pounds occasionally. Ability to push/pull 25 pounds frequently, 50-100 pounds occasionally, with and without a dolly Ability to sit, stand, bend, kneel, twist, climb and walk frequently This position includes working at heights such as using ladders or step stools as needed Discover the amazing benefits and perks that Redwood Apartment Neighborhoods offers! Visit our website today to learn more and see why Redwood is a great place to work: Redwood Apartment Neighborhoods Employee Benefits & Perks Redwood Living, Inc. is an equal opportunity employer. Redwood strictly prohibits and does not tolerate illegal discrimination, and Redwood provides equal employment opportunities to employees and applicants without regard to race, color, religion, creed, national origin or ancestry, ethnicity, sex (including gender, pregnancy, sexual orientation, and gender identity), age, physical or mental disability, citizenship, past, current, or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state, or local law. PI3cc31367d9f0-6525

Who We Are: At Dorsett Controls, we are at the forefront of automation innovation, providing cutting-edge control systems across industries such as HVAC, water/wastewater SCADA, and industrial automation. Our commitment to precision, efficiency, and reliability empowers organizations to optimize operations through smart technology solutions. We foster a culture of collaboration, learning, and career growth, ensuring that every team member plays a key role in shaping the future of automation. If you are passionate about designing and implementing world-class automation systems, we invite you to be part of our team. Your Role: As an Automation Engineer, you will be responsible for designing, implementing, and optimizing automation solutions that drive operational excellence. From pre-sales consultation to project execution and ongoing support, your expertise will directly impact the success of our clients and our business. What We Offer: Comprehensive Benefits - Medical, dental, vision, life insurance, EAP, FSA, HSA, LTD/STD insurance, and wellness benefits. Career Growth - Opportunities for advancement and education reimbursement. Impactful Work - Be a part of a team that delivers cutting-edge automation solutions in a collaborative and supportive environment. Key Responsibilities: Design and implement SCADA, PLC, and control system solutions for various industries. Develop HMI applications and program PLC-based controllers for automation and data collection. Configure and deploy RF and cellular communication networks for SCADA and RTU systems. Create and maintain software databases, control circuits, and system designs that meet automation requirements. Conduct Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to ensure system reliability. Collaborate with customers and internal teams to develop effective automation solutions. Provide technical support and assist in training new engineers and technicians. Ensure compliance with industry standards and company protocols in all automation projects. What You Bring: Bachelor's degree in Computer Science, Electrical Engineering, Engineering Technology or 5+ years of relevant experience. Proven ability to lead technical teams and manage complex automation projects. 8+ years of experience with PLCs, Direct Digital Controllers, or Distributed Control Systems. Hands-on experience with Allen-Bradley, Modicon PLCs, and commercial SCADA/HMI software. Certification or experience with Ignition or VTScada software is required. Strong understanding of IT networking, servers, and control system integration. Proficiency in CAD software for designing automation systems. Strong problem-solving, time management, and communication skills. Additional Requirements: Valid Driver's License (Class C) - Some travel may be required based on project needs. Ability to lift up to 30 pounds and work in a combination of office and field environments. Why Join Dorsett Controls? At Dorsett Controls, you will be part of a team that values innovation, technical excellence, and continuous improvement. Your expertise will help shape the future of automation while you grow professionally in a company that supports your career aspirations. Are you ready to make an impact? Apply today and take the next step in your automation engineering career! Certificates, Licenses, Registrations Valid Driver's License Class C Travel May require overnight or extended travel out-of-town based on project need. Language Skills Ability to read, analyze, and interpret common scientific and technical documents. Ability to respond to common inquiries or complaints from customers, or team members. Ability to effectively present information to management. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk, hear, stand, walk and lift up to 30 pounds. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Dorsett Controls is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Compensation details: 00 PI579537bc82ee-1195

Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PI262045bab28d-7550

HVAC Technician Location: Lakewood, CO Salary Range: $30 - $36 / hour Target fill date: Open until filled Rocky Mountain College of Art + Design is seeking an HVAC Technician to join our team on our beautiful, historic campus in Lakewood, CO. This individual will support the maintenance of the college campus by performing a variety of tasks, including connecting wires to circuit breakers, transformers, or other components; conducting preventative and electrical maintenance; troubleshooting equipment; and completing basic electrical repairs and installations. Occasional nights and weekends are required, and the technician may need to take 24-hour calls. Candidates must live within commuting distance of our campus and have reliable transportation. Primary Responsibilities: Perform minor maintenance and repair to designated equipment; perform routine and preventive maintenance on building equipment Monitor boiler chemicals and settings Perform basic electrical repairs/installation Perform general maintenance Operate and clean manual and power maintenance equipment; perform minor equipment repair Willingness to learn and perform tasks related to Structured Technology cabling, CAT6 cable, Fiber Optics, Cabling Terminations, installation of Security Cameras, Door Access, Sound Systems and Streaming Systems. Perform trash and snow removal Light construction and other building needs as requested Perform scheduled maintenance Be on call for after hours as needed Cover on call for the Director of Facilities when needed Behaviors and Attitudes reflect RMCAD's Mission, Vision, and Values Perform other duties as deemed necessary by management Qualifications: High School Diploma or GED required Experience with boilers Four years of experience in electrical work required Must be able to speak, read, and write English fluently Must know and be able to apply the National Electrical Code (NEC); maintains knowledge of any changes in the code Current State of Colorado Journeyman Electrical license required Must be able to perform the following tasks: Connect wires to circuit breakers, transformers, or other components Install conduit and new outlets Repair or replace wiring, equipment, or fixtures, using hand tools or power tools Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem. Working Conditions and Physical Demands: While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles and toxic or caustic chemicals. The employee regularly works near moving mechanical parts and is frequently exposed to outdoor weather conditions. The employee frequently works on high places and is occasionally exposed to extreme heat, wet or humid conditions (non-weather) and risk of electrical shock. The noise level in the work environment is usually loud. Must be able to move objects weighing up to 100 pounds regularly. Requires bending and stretching on a regular basis; may involve climbing high ladders or crawling around in confined spaces. Occasional nights and weekends are required. May need to take 24 hour calls. Our Benefits: Flexible Spending Account (FSA) Medical, Dental, & Vision Insurance Basic Life & AD&D Short & Long Term Disability Time Off including paid vacation, sick and holidays (7 Most Observed, and Birthday) 401k employer match Tuition Waiver Rocky Mountain College of Art + Design is an Equal Opportunity Employer Compensation details: 30-36 PIfd64c01b1-

We are seeking a skilled and experienced Utilities Superintendent to oversee the operation, maintenance, and reliability of all utilities, facilities, and grounds for our pharmaceutical manufacturing facility in Middletown DE. This role is responsible for ensuring all utilities equipment, automation & controls, and facilities are operated efficiently, safely, and maintained in compliance with Good Engineering Practices. The ideal candidate will lead a team of multi-skilled operators and maintenance technicians, manage vendor service contracts, and implement preventive/predictive maintenance programs, while working closely with cross-functional teams to support production goals and continuous improvement initiatives. Arrange and support routine maintenance activities on all utilities equipment including but not limited to Hurst Boilers, York Chillers, Marley Cooling Towers, Kaeser Air Compressors, BWT PW System, Durr RTO, and Caterpillar Emergency Diesel Generators, Develop and implement the Preventive Maintenance programs on all utilities equipment and systems Develop and implement a comprehensive Predictive Maintenance program including electrical system thermography, rotating equipment vibration analysis, and oil sampling Ensure safe and efficient operation of all utilities equipment and systems Ensure all direct reports and contractors work safely and in strict accordance with all WuXi EHS directives, policies and procedures Propose new technology, new materials and new equipment to enhance existing utilities maintenance level Effectively manage on hand quantities of all necessary spare parts to ensure reliable equipment and systems operation Responsible for the development of departmental Standard Operating Procedures (SOP's) and emergency response policies/procedures for utility maintenance operations. Organize ongoing training programs for the Utilities Team Ensure the optimization of the performance and efficiency of all utilities equipment and systems Manage the overall site Energy Efficiency programs including various utility supply contracts for natural gas and electricity with local regulating agencies Act as official liaison to the Town of Middletown for all utility related issues - electricity supply, effluent water treatment, etc. Act as official liaison to the state regulatory agency DNREC and manage all aspects of the Title V air emissions permitting program for boiler Nox emissions and operation of Regenerative Thermal Oxidizer RTO Manage all facilities and grounds contracts including but not limited to lawn care & snow removal, janitorial services, garbage disposal and recycling, uniforms, gas cylinders, universal waste disposal, etc. Implement Root Cause Analysis (RCA) or other similar reliability based protocols on all equipment failures Regulatory Compliance & Documentation Maintain accurate records of all maintenance activities, work orders, SOPs, calibration, and validation reports. Ensure all equipment and systems are properly qualified and validated per regulatory standards. Participate in audits and regulatory inspections, providing necessary maintenance documentation and reports Responsible for state of Delaware licensing of high-pressure boiler equipment operators Strong working knowledge of all EHS protocols including Safe Work Permitting, Lock Out/Tag Out, Confined Space Entry, Energized Equipment Work, Elevated Work, Hot Work, Lifting Equipment Usage, Underground Excavation Working knowledge of electrical systems from 27.3 KV down to 480 Volts Team Leadership & Training Lead and manage a team of multi-skilled maintenance technicians and equipment operators Provide technical support and guidance to operations and maintenance personnel including training on utilities equipment operation and maintenance. Foster a culture of safety, quality, and continuous improvement within the Utilities department Collaborate with cross-functional teams, including Production, Quality Assurance, Engineering, and Safety teams. Continuous Improvement & Cost Management Identify and implement efficiency improvements to optimize operation & maintenance operations and to reduce costs. Manage the Utilities Equipment Operating Budget and the associated Maintenance support budget, spare parts inventory, and vendor contracts to ensure cost-effective maintenance solutions. Recommend and implement energy-saving and sustainability initiatives to improve overall facility performance Manage the ongoing annual Capital Improvement budget for all Utilities equipment and systems Bachelor's of Science degree in Engineering (Mechanical, Electrical, Chemical, Industrial, etc.) or a related field required 5+ years of specific Utilities equipment operation and maintenance experience in a Life Sciences/Pharmaceuticals/Biotechnology or FDA-regulated environment required Strong knowledge of GMP, FDA, OSHA, and industry best practices in Utilities Equipment and systems operation and maintenance Hands-on past experience with cleanrooms, HVAC systems, water purification, compressed air, electrical systems, pressure/temperature/flow instrumentation, instrumentation testing & calibration, and automation systems a plus Knowledge of PLC's, HMI's, SCADA, Building Management Systems (BMS), and Environmental Management Systems (EMS) a plus. Experience with Computerized Maintenance Management Systems (CMMS) - past experience with SAP R/4 HANA EAM module is a definite plus Excellent problem-solving, leadership, and project management skills Ability to work in a fast-paced, highly regulated environment. Certification in Lean Manufacturing, Six Sigma, or Reliability-Centered Maintenance (RCM) is a plus Strong hands-on leadership style Proficient in oral & written communication skills Demonstrated ability to read, write and speak English Past experience with AutoCAD or other drawing management system is a plus Proficiency in Microsoft Office (Excel, Word, Outlook, PowerPoint) 10% travel is possible; both domestic and international Physical Requirements: Must be able to work in an office environment with minimal noise conditions Must be able to wear appropriate PPE Must be able to work in a plant environment with variable noise levels Ability to stand/sit/walk for long periods of time Ability to lift 10 lbs. routinely Ability to crouch, bend, twist, and reach Ability to push/pull 10 lbs. routinely / often / occasionally Clarity of vision Ability to identify and distinguish colors Must be able to perform activities with repetitive motions Ability to climb ladders / stairs / scaffolding Ability to work in variable temperatures (hot, cold, etc.) Ability to work both inside and outside in varying working conditions

Position: Field Service Technician Position Type: Full-time, Non-Exempt, Hourly Reports To: Field Services Site Leads Location: Remote Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing This role requires being out in the field on client project sites. The projects involve the installation, testing, and commissioning of a modular cooling system at sites in Texas, Idaho, Alabama, South Carolina and Ohio. This position requires flexibility to travel around the country. Travel time is approximately 70-75%. The Field Service Technician will provide responsive electrical, mechanical and automation support for chilled water systems and ancillary components through analysis, troubleshooting, remediation, implementation, commissioning and testing. As a direct point of contact for our customers, this role will drive customer satisfaction, maximize customer retention and increase profitability in a field environment without direct supervision. Essential Functions Providing on hand support during hydro-testing & flushing to address leaks as they develop, re-torquing flanges and mechanical connections as needed Troubleshooting mechanical equipment, such as valves, and at times performing replacement Perform repair welds on as needed basis Familiarity with pipefitting and the ability to read and interpret piping schematics and blueprints. Read and interpret engineered drawings (P&ID's, loop sheets, wiring schematics, electrical one-lines, PLC ladder logic, etc.) Operate all standard service tools and electrical testing equipment (multimeters, voltmeters, megohmmeters, etc.) Calibrate, troubleshoot and monitor variable frequency drives and 0-10V/4-20mA instrumentation Perform moderately complex chilled water system start-ups Set up VFD parameters for proper interface and operation Performing any site installation of auxiliary piping & equipment What We're Looking For Must Have's: Proven experience in installing and commissioning modular cooling systems. Minimum 3 years previous experience with piping and welding (techniques such as TIG, MIG, and stick welding) in HVAC or modular systems. Knowledge of various piping materials (e.g., steel, copper, PVC) and their applications. Ability to perform precise measurements and cuts for piping installations. Ability to diagnose and troubleshoot issues related to piping and welding. Proficiency in using welding and pipefitting tools and equipment (threader, reaming and cutting, tap & die, etc.) Proficiency with working on Victaulic piping Knowledge of piping instrumentation and in line devices Prior experience with motors, control systems and motor control centers (up to 4160V, 3 phase) Prior experience calibrating and troubleshooting industrial instrumentation (pressure, temperature, flow) Ability to operate forklifts, scissor lifts and boom lifts Proficiency in Microsoft Office OSHA 30 with a strong safety record NFPA70e LOTO certification Relevant State Certifications and Licenses Knowledge of king span or metal span panels and flashing Must be authorized to work in the United States and have a current passport. Must have a valid driver's license and be able to obtain TWIC Experienced in preparing daily field reports through Autodesk or similar construction management tools Experienced in navigating the demands and responsibilities of active construction environments. Nice to Have: Familiar with Rockwell Automation ABB, VFD Drive, Rockwell Automation PLC and HMI vocational training with emphasis on industrial instrumentation Rockwell Automation certification ISA certification Certified Control Systems Technician (CCST) registration or completion of relevant training courses Experience with PLC Programming Logic (Allen Bradley and Siemens) Previous equipment startup and commissioning experience Microsoft certifications for Rockwell products and other relevant applications What We Offer Travel Per Diem Pay for lodging and food Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off. 10-Paid holidays a year. Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership Tuition Assistance What Hours You Will Work Overtime may be necessary as workload dictates. This may include weekdays, weekends or holidays. Work Conditions This position operates mainly in a construction site and operating industrial plant environment. The technician must comply with safety policies, practices and procedures at all times. Work is primarily done in the field which could be in a construction area requiring use of earplugs, hardhat, steel-toe boots and safety glasses. The work environment could be outdoors, hot or cold, noisy and/or dirty. Physical Demands The technician must be able to work effectively in a construction environment for system testing including climbing ladders and moving around on platforms to maneuver in and around equipment. The technician must also occasionally lift and/or move up to 50 pounds. The technician must be able to see and read printed materials, speak and comprehend verbal communication, operate a computer, travel including flying as well as driving long distances, work in confined spaces, stand for long periods of time and walk on uneven surfaces. PIf4cc691e12e6-0969

Description: Seeking a full-time Maintenance Supervisor for an apartment community in Overland Park, KS. This is an amazing opportunity with a company that values it's team mates and company culture. Rental housing discount available if living on site. About Horizon Horizon is a fast-growing property management company that owns and operates over 50 apartment communities nationwide. Horizon is based in Seattle and is ranked as one of the top 15 student housing operators. Their vibrant culture, passion for people over process, and innovative growth mentality make Horizon a top-tier company to work for. Horizon invests in their teammates through continued training and education to prepare their people for growth when the next opportunity arises. Horizon places a priority on their teammates' health and well-being which are reflected in their work/life balance, a rich benefits package, and wellness programs. Check out our careers page to learn more: Horizon's mission is to provide every client with unmatched service, respect, and integrity delivered with a sense of warmth, teamwork and company spirit. Job Description The Maintenance Supervisor reports to the Property Manager and oversees all the maintenance needs, physical appearance, and service requests on the property while working within the allotted budget. The Maintenance Supervisor's primary responsibilities are hands on maintenance of the property including general upkeep and repair to units and the grounds, ensuring the service request tracking system is used and followed up with properly, turn and make ready processes run smoothly, supervising the maintenance team, and maintaining excellent resident relations through superior customer service. On call and some weekend availability required. Your job responsibilities are included but not limited to items listed below. At Horizon, we believe in teamwork and going above and beyond in our position to accomplish results. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES Maintain positive resident relations through superior service Participate in the daily operations of the property Supervise the Maintenance Team Inspects the grounds, buildings and other community features various times throughout the day to identify, minimize and correct hazardous property conditions, liability concerns, and maintains exceptional property appearance in line with HRA standards. Fulfills resident service requests in accordance with HRA policy while maintaining superior customer service. Trains the Maintenance team on HRA standards for maintaining exceptional property appearance and fulfilling resident service requests. Monitors service request turnaround time and responsiveness, and immediately corrects if HRA standards are not being met. Performs unit inspections to determine move-in readiness after move-outs, and assist with make ready processes prior to new resident move-in both throughout the year and during turn season. Assists Property Manager with creating turn make ready board, key replacement process, vendor key system and all other turn related processes, such as ordering turn supplies/appliances for the units in a timely manner while remaining in line with the allotted budget. Additionally, oversees vendor negotiation, scheduling and contracting. Lifts and work with heavy equipment as needed. Supervises the Maintenance Team; Interview, hire and train maintenance team for property location. Plans and organizes tasks for all technicians and porters before the start of each shift. Additionally, conducts performance evaluations that are timely and constructive. Manages and maintains a preventative maintenance program that extends the life of the community while minimizing future repairs. Maintains well-organized and properly stocked maintenance shop while adhering to safety standards, OSHA guidelines and remaining in line with allotted budget. Performs hands on maintenance while overseeing the maintenance and repairs of electrical, plumbing, heating, ventilation, air conditioning (HVAC), carpentry, painting, drywalling, appliances, and other building systems. Performs Maintenance callbacks of assigned service requests. Designs, implements, and executes in-house and/or capital projects as assigned by Property Manager or Corporate team. Assists with department budget estimates and costs of specific repair projects. Ensures consistency in dealing with residents on all matters. Complies with all federal, state, and local laws relating to Fair Housing. Performs after hour and/or weekend "on call" duties as assigned. COMPENSATION We offer an excellent compensation packet including a very competitive salary (DOE), bonus potential, health, dental, and vision insurance, life insurance, disability insurance, 401k, paid time off, paid holidays, flexible spending account, HSA, etc. Hourly Wage: $30-32 DOE, plus bonus. Rental housing discount of 20% offered if living on site. Equal Opportunity Employer (EOE) PM21 PIdfd7612c4bd8-1379

HVAC TECHNICIAN Yountville, CA Laying in the heart of Napa Valley, The Estate Yountville features two magnificent hotels that embody the perfect getaway and retreat. Surrounded by vineyards, Michelin-star restaurants and exquisite views in Yountville, our 22-acre haven sits among one the most coveted viticulture regions in the world. We invite our guests to immerse themselves in a redesigned Wine Country experience in a delightfully vino-cultured manner: two luxury hotels with decidedly different personalities - the vibrant Hotel Villagio and its sophisticated counterpart, Vintage House, a chic and tranquil sanctuary. A combined room-count of nearly 200 rooms and suites allows us to create a memorable experience for any occasion! JOB SUMMARY: The HCVAC Technician is responsible for maintaining the physical functionality and safety of the hotel's equipment and machinery in the hotel continuing effort to deliver outstanding guest service and financial profitability. ESSENTIAL JOB RESPONSIBILITIES: Maintain, monitor, repair and conduct routine preventive maintenance to ensure the safe and efficient operation of hotel equipment and machinery. Adhere to all safety policies and procedures. Diagnosing electrical and mechanical faults for HVAC systems. Perform routine maintenance and preventative maintenance on heating and air conditioning systems. Inspect and perform equipment repairs and replacements. Respond to emergency/service maintenance requests. Maintaining and repairing ventilation and air conditioning systems and equipment Identifying maintenance risks on equipment. Operate a variety of hand and power tools to inspect, repair, and conduct maintenance on furnaces, coils, and condenser units etc. REQUIRED QUALIFICATIONS: 2+ years of previous experience in HVAC or other related fields Familiarity with HVAC wiring diagrams Ability to handle physical workload Strong problem solving and critical thinking skills Must be able to lift/push/pull at least 50 lbs., as well as perform overhead work and crawling/squatting, with or without a reasonable accommodation Hotel Villagio & Vintage House offer an attractive compensation and benefits package and the opportunity to be part of a dynamic team. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Hotel Villagio and Vintage House are equal opportunity employers (Minorities/Females/Disabled/Veterans) PM22 Compensation details: 50-60 Hourly Wage PIf8e930fee5-

Description: Seeking a full-time Maintenance Technician for an apartment community in Tucson, AZ. This is an exciting opportunity with a company that values their teammates and company culture. Rental housing discount available if living on site. About Horizon Horizon is a fast-growing property management company that owns and operates over 50 apartment communities nationwide. Horizon is based in Seattle and is ranked as one of the top 15 student housing operators. Their vibrant culture, passion for people over process, and innovative growth mentality make Horizon a top-tier company to work for. Horizon invests in their teammates through continued training and education to prepare their people for growth when the next opportunity arises. Horizon places a priority on their teammates' health and well-being which are reflected in their work/life balance, a rich benefits package, and wellness programs. Check out our careers page to learn more: Horizon's mission is to provide every client with unmatched service, respect, and integrity delivered with a sense of warmth, teamwork and company spirit. Job Description The Maintenance Technician reports to the Maintenance Supervisor and is responsible for assisting in all the property's maintenance needs, physical appearance, and service requests. The Maintenance Technician's primary responsibilities include assisting the Maintenance Supervisor with managing service requests, preventative maintenance, capital projects, turnover/make ready processes, and maintaining excellent resident relations through superior customer service. On call & some weekend availability required. Your job responsibilities are included but not limited to items listed below. At Horizon, we believe in teamwork and going above and beyond in our position to accomplish results. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES Maintains positive resident relations through superior service. Inspects the grounds, buildings and other community features various times throughout the day to identify, minimize and correct hazardous property conditions, liability concerns, and maintains exceptional property appearance in line with HRA standards. Fulfills resident service requests in accordance with HRA policy while maintaining superior customer service. Monitors service request turnaround time and responsiveness to ensure HRA standards are being met. Performs unit inspections to determine move-in readiness after move-outs, and performs make ready processes prior to new resident move-in both throughout the year and during turn season. Performs other turn related duties as assigned. Lifts and works with heavy equipment as needed. Promptly reports any safety or maintenance concerns to the Maintenance Supervisor. Participates in the daily operations of the property. Performs general maintenance and repairs for assigned equipment and facilities; including, but not limited to: plumbing, electrical, basic carpentry, heating & cooling and other building systems. Assists the Maintenance Supervisor with in-house projects and/or capital projects as assigned. Maintains preventative maintenance program that extends the life of the community while minimizing future repairs. Performs Maintenance callbacks of assigned service requests. Maintains well-organized and properly stocked maintenance shop while adhering to safety standards, OSHA guidelines, and while staying in line with the allotted budget. Ensures consistency in dealing with residents on all matters. Complies with all federal, state, and local laws relating to Fair Housing. Performs after hour and/or weekend "on call" duties as assigned. COMPENSATION We offer an excellent compensation packet including a very competitive salary (DOE), bonus potential, health, dental, and vision insurance, life insurance, disability insurance, 401k, paid time off, paid holidays, flexible spending account, HSA, etc. Hourly Wage: $20-22DOE, plus quarterly bonuses. Rental housing discount of 20% offered if living on site. Equal Opportunity Employer (EOE) QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. EDUCATION High school diploma or equivalent required EXPERIENCE A minimum of 1 year maintenance experience required Maintenance experience in multi-unit complexes or hotels preferred Experience with plumbing, electrical and HVAC preferred HVAC Certification preferred Mechanical background preferred REQUIREMENTS Good organizational and people skills Knowledge of general carpentry and repair Must be able to lift and work with heavy equipment Ability to use hand tools and power tools A valid driver's license, good driving record and proof of insurance is required A passion to serve residents, parents, vendors, and colleagues PM21 PIde959fe5-

Description: About Us We know you have a choice about where you work, and we're excited that you are considering a career with Levco Management. Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part of our company's success is our employees, which is why we invest so much in our team members' success through comprehensive benefits, performance bonuses, team building events, and much more. Levco places a high priority on developing our employees and providing them with the support and resources they need to achieve personal goals, professional growth, and successful long-term careers with our company. We focus on building an inclusive, team-oriented culture of passionate and hard-working professionals. Growing together as a team provides our employees with a sense of camaraderie and rewarding professional opportunities that are unique to our company. We are looking for an upbeat, hard-working individual to join us in making a positive impact on the community. If you are customer-oriented, a team player, and are ready to make a difference, join the Levco team! Multifamily HVAC Technician Position Detail: Full time, no on-call required. Hourly: $30.00 - $35.00 an hour, compensation is commensurate with experience. FLSA Status: Non-Exempt Schedule: Monday - Friday, 8:00 am - 5:00 pm, additional hours may be required upon approval. Reports to: Director of Construction and Maintenance Sign On Bonus: $2,500 General Description The HVAC Technician is responsible for the installation, testing, and maintenance of heating, ventilation, air conditioning, and refrigeration systems and related equipment. Other duties of the position include communicating with project managers to establish job scopes and related costs, reviewing and developing HVAC designs, and coordinating with other construction team members for scheduling HVAC portions of a project. Qualifications Must have a minimum of 5 years of experience working as an HVAC technician. Candidate must have or be eligible to obtain a journeyman HVAC license within 12 months of hire (Paid for by Levco). Must have an EPA universal certification. Strong working knowledge of standard practices of the HVAC and refrigeration trade and theory. Strong working knowledge of the materials, methods, and tools used in the installation, operation, and repair of HVAC systems. Strong working knowledge of applicable building codes, ordinances, and regulations pertaining to HVAC and refrigeration. Employees must have a wide variety of appropriate hand and trade related tools. Self-starter with the ability to work as a team, as well as independently in the field. Perform manual labor in an outdoor environment in various conditions, including at heights. Physical requirements of the position include, but not limited to, standing, lifting, and carrying a minimum of 50lbs unassisted, crawling, climbing ladders, kneeling, bending, etc. Ability to meet project deadlines. Comfortable with operating computers, software, and online ordering platforms. A valid driver's license is required. Responsibilities Repairing, maintaining, and installing various HVAC systems and fixtures in all types of structures (although mostly multifamily residential). Coordinating with management, maintenance, and other construction professionals on a jobsite. Reading blueprints or building plans and installing to design specifications. Following current rules and regulations related to HVAC codes, EPA regulations, OSHA, and Company policies. Keeping and maintaining records of time spent on a job and materials purchased for the work. Estimating time and costs for project bidding. Responding to HVAC emergencies, including after hours as needed. Assisting maintenance as needed. Any other duties as assigned by your supervisor. Benefits No on call required PTO: 15 days after 90 days of employment (lump sum), increases with tenure Industry leading paid Holidays Generous housing discounts Health, vision, and dental insurance plans with employer contributions Employer covered group life insurance policy Voluntary life and accident insurance Short-term disability 401(k) Cell phone reimbursement Company vehicle provided, subject to limitations terms and conditions apply Levco Construction is an Equal Opportunity Employer. Requirements: PI979c5eea5-

POSITION SUMMARY The Maintenance Technician is responsible for assisting with the overall facilities maintenance under the direction of the Assistant Superintendent or Building Superintendent. ESSENTIAL FUNCTIONS The position requires performance in a wide range of areas to the buildings, grounds, and equipment. It requires a working knowledge of the plumbing, electrical, carpentry, HVAC, appliance repair, grounds maintenance, painting, flooring, etc. These functions are not limited to the following areas: Completion of work orders in a timely basis. Preparation of apartment turnovers within established guidelines. Cleaning of the community buildings, laundry rooms, office building, maintenance shop and grounds and keeping all areas clean and sanitary. Daily collection of debris on the property. Cleaning of parking lots and dumpster areas. Coordinating with Superintendent and/or Property Manager for any unit inspections and follow-up with work orders to repair all deficiencies found. Upon notification from the Maintenance Superintendent and/or Property Manager, be available for emergency duty, such as snow removal and in case of a fire or any other emergencies as defined by Management. Completing any incident reports within 24 hours of occurrence (i.e. injuries, property damage, disturbances, etc.) Accepting maintenance requests only from Superintendent and/or Property Manager. QUALIFICATIONS: SKILLS & ABILITIES 3 years experience in all facets of property maintenance High School graduate or equivalent Knowledge in plumbing, HVAC, electrical, carpentry, appliance repair, maintenance, grounds maintenance, roofing, flooring, etc. or the ability to learn this skill Ability to communicate both orally and in writing with a wide range of people Ability to accept responsibility and account for his/her action Trait of being dependable and trustworthy Ability to utilize available time to organize and complete work within given deadlines Ability to work at a sustained pace and produce quality work Required to assist on an oncall rotation schedule Use of the proper safety equipment; gloves, goggles, back belts and proper foot wear required PHYSICAL ABILITIES Lift/Carry, Push/Pull Stand 12 lbs. or less (F) Walk 11-20 lbs. (F) Sit 21-50 lbs. (O) 26-40 lbs. (O) Handling/Fingering 51-100 lbs. (F) over 40 lbs. (N) Reach Outward/Above Shoulder (F) over 100 lbs.(N) Climb (N/A) Crawl (O) up to 33% of time Squat/Kneel (F) up to 66% of time Bend (C) more than 66% of time Compensation details: 22-23 Yearly Salary PIba1-

Position Type: Full-time, Non-exempt, Hourly Reports to: Field Services Manager Supervisory Responsibility: None Location: Monroe, Louisiana Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing This role requires being out in the field on client project sites. The projects involve the installation, testing, and commissioning of a modular cooling system at sites in Texas, Idaho, Alabama, South Carolina and Ohio. This position requires flexibility to travel around the country. Travel time is approximately 70-75%. The Field Service Technician will provide responsive electrical, mechanical and automation support for chilled water systems and ancillary components through analysis, troubleshooting, remediation, implementation, commissioning and testing. As a direct point of contact for our customers, this role will drive customer satisfaction, maximize customer retention and increase profitability in a field environment without direct supervision. Essential Functions Providing on hand support during hydro-testing & flushing to address leaks as they develop, re-torquing flanges and mechanical connections as needed Troubleshooting mechanical equipment, such as valves, and at times performing replacement Perform repair welds on as needed basis Familiarity with pipefitting and the ability to read and interpret piping schematics and blueprints. Read and interpret engineered drawings (P&ID's, loop sheets, wiring schematics, electrical one-lines, PLC ladder logic, etc.) Operate all standard service tools and electrical testing equipment (multimeters, voltmeters, megohmmeters, etc.) Calibrate, troubleshoot and monitor variable frequency drives and 0-10V/4-20mA instrumentation Perform moderately complex chilled water system start-ups Set up VFD parameters for proper interface and operation Performing any site installation of auxiliary piping & equipment What We're Looking For Must Have's: Proven experience in installing and commissioning modular cooling systems. Minimum 3 years previous experience with piping and welding (techniques such as TIG, MIG, and stick welding) in HVAC or modular systems. Knowledge of various piping materials (e.g., steel, copper, PVC) and their applications. Ability to perform precise measurements and cuts for piping installations. Ability to diagnose and troubleshoot issues related to piping and welding. Proficiency in using welding and pipefitting tools and equipment (threader, reaming and cutting, tap & die, etc.) Proficiency with working on Victaulic piping Knowledge of piping instrumentation and in line devices Prior experience with motors, control systems and motor control centers (up to 4160V, 3 phase) Prior experience calibrating and troubleshooting industrial instrumentation (pressure, temperature, flow) Ability to operate forklifts, scissor lifts and boom lifts Proficiency in Microsoft Office OSHA 30 with a strong safety record NFPA70e LOTO certification Relevant State Certifications and Licenses Knowledge of king span or metal span panels and flashing Must be authorized to work in the United States and have a current passport. Must have a valid driver's license and be able to obtain TWIC Experienced in preparing daily field reports through Autodesk or similar construction management tools Experienced in navigating the demands and responsibilities of active construction environments. Nice to Have: Familiar with Rockwell Automation ABB, VFD Drive, Rockwell Automation PLC and HMI vocational training with emphasis on industrial instrumentation Rockwell Automation certification ISA certification Certified Control Systems Technician (CCST) registration or completion of relevant training courses Experience with PLC Programming Logic (Allen Bradley and Siemens) Previous equipment startup and commissioning experience Microsoft certifications for Rockwell products and other relevant applications What We Offer Travel Per Diem Pay for lodging and food Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off. 10-Paid holidays a year. Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership Tuition Assistance What Hours You Will Work Overtime may be necessary as workload dictates. This may include weekdays, weekends or holidays. Work Conditions This position operates mainly in a construction site and operating industrial plant environment. The technician must comply with safety policies, practices and procedures at all times. Work is primarily done in the field which could be in a construction area requiring use of earplugs, hardhat, steel-toe boots and safety glasses. The work environment could be outdoors, hot or cold, noisy and/or dirty. Physical Demands The technician must be able to work effectively in a construction environment for system testing including climbing ladders and moving around on platforms to maneuver in and around equipment. The technician must also occasionally lift and/or move up to 50 pounds. The technician must be able to see and read printed materials, speak and comprehend verbal communication, operate a computer, travel including flying as well as driving long distances, work in confined spaces, stand for long periods of time and walk on uneven surfaces. PI4e3f9592b6b8-9584