JOB SUMMARY: Under general supervision of the Shop Foreman, this position is responsible for assuring that County vehicles and equipment are available and in good repair at all times by performing a variety of skilled duties in the maintenance and repair of mechanized and other automotive-related equipment. PRINCIPAL JOB DUTIES: Maintain a clean, functional, and safe shop environment by using appropriate safety equipment and procedures when performing duties. Perform the daily operations of equipment/vehicle maintenance for the Department and all other county vehicles. Adhere to all County policies and procedures, and all laws and regulations as they pertain to the management of assigned area. Maintain expert operating and maintenance knowledge of all vehicles and equipment owned, leased, or rented. Place Order for various parts and pick up such parts at supplier if necessary. Report to Shop Foreman - all incidents of equipment malfunction/failure, possible reasons for the problem, and suspected and obvious employee equipment abuse. May train and give general direction to lower classified employees. Perform on call duties as required. Other related duties assigned by the Shop Foreman. MINIMUM JOB REQUIREMENTS: EDUCATION: High School diploma or equivalent with 5 years experience as an automotive technician, or an associates degree in automotive maintenance or related field, or vocational training in automotive maintenance or related field. CERTIFICATIONS: ASE (Automotive Service Excellence) T1 thru T8 Certified OR Master Mechanic with ASE T1 thru T8 - Preferred. EXPERIENCE: Requires a journey level ability to independently accomplish tasks or projects of typical complexity in a consistent and accurate manner and in a variety of situations. Such a level is generally acquired through at least five years of experience in servicing, maintaining and repairing mechanized and automotive equipment such as: diesel engines, gas engines, and hydraulics. KNOWLEDGE, SKILLS, & ABILITIES : Must have a journey level knowledge of standard practices, procedures, hazards, and safety precautions relevant to the mechanical and construction trade. Able to maintain courteous and effective working relationships with the public, County departments, co-workers and other agencies. Must function at the journey level in the adjustment, operation, maintenance and repair of mechanical and automotive equipment, and in the use of mechanical tools, materials and diagnostic equipment. Must be able to accurately and effectively transmit and receive information that is necessary to the accomplishment of goals and objectives, including effective written and oral communications; and the ability to listen. NECESSARY SPECIAL REQUIREMENTS: Must possess a valid Colorado commercial driver license, Class B with tanker endorsement. Must pass background check: Criminal and Traffic ( Conviction of a crime will not be an absolute bar to employment) Must pass initial and all random alcohol & drug tests Required legal authorization to work - United States citizenship or legal authorization to work in the United States Must have a working phone, can be either land line or cell phone PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job: Work is conducted primarily indoors in a shop environment with occasional outdoor activity. When working outdoors, employees will be exposed to a variety of climatic conditions such as cold, heat, wind, rain, dust and snow. The noise level experienced will be from moderate to loud. Work is generally scheduled Monday through Friday. Rarely travel to other locations may be required by passenger vehicle. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job : While performing the duties of this job, the employee is frequently required to stand; walk; talk; use hand to finger, handle, or feel objects, tools, or controls; climb or balance; twist and turn the upper body; stoop, kneel, crouch, climb, or crawl; and reach with hands and arms. Hearing voice conversation is essential to safe and effective job performance. The employee is occasionally required to sit. Physical demands are described as medium to high (exert up to 100 lbs. of force occasionally, and/or up to 30 lbs. of force frequently, and up to 10 lbs. of force constantly to move objects). Data entry and other tasks will require minimal sitting at a computer for short periods of time. Specific vision abilities required by this job include close vision, distance vision, depth perception, adjust focus, color vision, and peripheral vision. The above statements are intended to describe the general nature and level of work. They are not intended to be an exhaustive list of requirements and duties. Clear Creek County provides reasonable job-related accommodations for disabled persons. The above statements are intended to describe the general nature and level of work. They are not intended to be an exhaustive list of requirements, duties, and responsibilities. Clear Creek County provides reasonable job-related accommodations for disabled persons. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c). Compensation details: 33.45-47.5 PI75c0a8a9c5b7-3462
09/03/2025
Full time
JOB SUMMARY: Under general supervision of the Shop Foreman, this position is responsible for assuring that County vehicles and equipment are available and in good repair at all times by performing a variety of skilled duties in the maintenance and repair of mechanized and other automotive-related equipment. PRINCIPAL JOB DUTIES: Maintain a clean, functional, and safe shop environment by using appropriate safety equipment and procedures when performing duties. Perform the daily operations of equipment/vehicle maintenance for the Department and all other county vehicles. Adhere to all County policies and procedures, and all laws and regulations as they pertain to the management of assigned area. Maintain expert operating and maintenance knowledge of all vehicles and equipment owned, leased, or rented. Place Order for various parts and pick up such parts at supplier if necessary. Report to Shop Foreman - all incidents of equipment malfunction/failure, possible reasons for the problem, and suspected and obvious employee equipment abuse. May train and give general direction to lower classified employees. Perform on call duties as required. Other related duties assigned by the Shop Foreman. MINIMUM JOB REQUIREMENTS: EDUCATION: High School diploma or equivalent with 5 years experience as an automotive technician, or an associates degree in automotive maintenance or related field, or vocational training in automotive maintenance or related field. CERTIFICATIONS: ASE (Automotive Service Excellence) T1 thru T8 Certified OR Master Mechanic with ASE T1 thru T8 - Preferred. EXPERIENCE: Requires a journey level ability to independently accomplish tasks or projects of typical complexity in a consistent and accurate manner and in a variety of situations. Such a level is generally acquired through at least five years of experience in servicing, maintaining and repairing mechanized and automotive equipment such as: diesel engines, gas engines, and hydraulics. KNOWLEDGE, SKILLS, & ABILITIES : Must have a journey level knowledge of standard practices, procedures, hazards, and safety precautions relevant to the mechanical and construction trade. Able to maintain courteous and effective working relationships with the public, County departments, co-workers and other agencies. Must function at the journey level in the adjustment, operation, maintenance and repair of mechanical and automotive equipment, and in the use of mechanical tools, materials and diagnostic equipment. Must be able to accurately and effectively transmit and receive information that is necessary to the accomplishment of goals and objectives, including effective written and oral communications; and the ability to listen. NECESSARY SPECIAL REQUIREMENTS: Must possess a valid Colorado commercial driver license, Class B with tanker endorsement. Must pass background check: Criminal and Traffic ( Conviction of a crime will not be an absolute bar to employment) Must pass initial and all random alcohol & drug tests Required legal authorization to work - United States citizenship or legal authorization to work in the United States Must have a working phone, can be either land line or cell phone PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job: Work is conducted primarily indoors in a shop environment with occasional outdoor activity. When working outdoors, employees will be exposed to a variety of climatic conditions such as cold, heat, wind, rain, dust and snow. The noise level experienced will be from moderate to loud. Work is generally scheduled Monday through Friday. Rarely travel to other locations may be required by passenger vehicle. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job : While performing the duties of this job, the employee is frequently required to stand; walk; talk; use hand to finger, handle, or feel objects, tools, or controls; climb or balance; twist and turn the upper body; stoop, kneel, crouch, climb, or crawl; and reach with hands and arms. Hearing voice conversation is essential to safe and effective job performance. The employee is occasionally required to sit. Physical demands are described as medium to high (exert up to 100 lbs. of force occasionally, and/or up to 30 lbs. of force frequently, and up to 10 lbs. of force constantly to move objects). Data entry and other tasks will require minimal sitting at a computer for short periods of time. Specific vision abilities required by this job include close vision, distance vision, depth perception, adjust focus, color vision, and peripheral vision. The above statements are intended to describe the general nature and level of work. They are not intended to be an exhaustive list of requirements and duties. Clear Creek County provides reasonable job-related accommodations for disabled persons. The above statements are intended to describe the general nature and level of work. They are not intended to be an exhaustive list of requirements, duties, and responsibilities. Clear Creek County provides reasonable job-related accommodations for disabled persons. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c). Compensation details: 33.45-47.5 PI75c0a8a9c5b7-3462
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Engineer (Tool Design Engineer) Job ID: 27793 Job Location: Culpeper, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: Our site near Culpeper, VA , in Orange County is our center of excellence for Solid Rocket Motor Propulsion and Energetics development as well as high-complexity production programs. This position will focus on component and system tooling design for solid rocket propulsion systems and component sub-assembly operations. Work is performed with general direction and exercises considerable latitude in determining objectives and approaches on assignments. The successful individual will guide design and development of Jigs, Fixtures, Lifting devices, and Semi-Automated Equipment to cast and assemble the final product. Essential Functions: Under general supervision, provides engineering design concepts in support of manufacturing process and tooling. Develops CAD Model concepts, 3D modeling and detailed 2D drawings. Is active in design conception as well as assisting in the development of processes, working in a team environment. Responsible for design completeness through fabrication, including tool and process tryout. May support more senior Tooling Engineers to develop tooling concepts and designs. Directs or supports design, fabrication, modifications and repair of special tools in support of manufacturing operations and processes of solid rocket motor, air-breathing, and warhead programs. Provides technical support to product engineering for producibility through manufacturing, test and field use. Assists in tool acceptance criteria for in-house fabrication or outside procurement of special tools. Qualifications: Bachelor's Degree and minimum 4 years of prior tool design experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Emphasis in mechanical tool design is preferred. CREO CAD modeling and drafting experience is preferred. Previous machine shop experience is desirable. Experience with solid rocket motors or other energetics is a plus L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
09/03/2025
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Engineer (Tool Design Engineer) Job ID: 27793 Job Location: Culpeper, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: Our site near Culpeper, VA , in Orange County is our center of excellence for Solid Rocket Motor Propulsion and Energetics development as well as high-complexity production programs. This position will focus on component and system tooling design for solid rocket propulsion systems and component sub-assembly operations. Work is performed with general direction and exercises considerable latitude in determining objectives and approaches on assignments. The successful individual will guide design and development of Jigs, Fixtures, Lifting devices, and Semi-Automated Equipment to cast and assemble the final product. Essential Functions: Under general supervision, provides engineering design concepts in support of manufacturing process and tooling. Develops CAD Model concepts, 3D modeling and detailed 2D drawings. Is active in design conception as well as assisting in the development of processes, working in a team environment. Responsible for design completeness through fabrication, including tool and process tryout. May support more senior Tooling Engineers to develop tooling concepts and designs. Directs or supports design, fabrication, modifications and repair of special tools in support of manufacturing operations and processes of solid rocket motor, air-breathing, and warhead programs. Provides technical support to product engineering for producibility through manufacturing, test and field use. Assists in tool acceptance criteria for in-house fabrication or outside procurement of special tools. Qualifications: Bachelor's Degree and minimum 4 years of prior tool design experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Emphasis in mechanical tool design is preferred. CREO CAD modeling and drafting experience is preferred. Previous machine shop experience is desirable. Experience with solid rocket motors or other energetics is a plus L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security (BDS) and Boeing Global Services (BGS) are looking for Experienced Workplace Coaches to join our Executive Fleet and Workforce Planning and Development teams in San Antonio, TX. In this role, you will be critical in the effort to reduce rework, improve first time quality, promote safety and initiate process improvement across all Aircraft Programs at the San Antonio site. Your aircraft electrical and structural expertise will be instrumental in building a strong versatile work force that will bolster production. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location (San Antonio, TX). This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Top Secret clearance Post Start is required Special Program Access or other Government Access Requirements are mandatory for this position Position Responsibilities: Electrical Workplace Coach (WPC) Learn and develop employees in all electrical and avionics-based aircraft skills Experience with major electrical aircraft modifications and be able to articulate, teach, and coach detailed operations therein to include but not limited to the following: sealing, wrapping, bonding, soldering, tying, crimping, terminations, and the closure of wire harnesses, shielded wires, coaxial cables, cable routing/assembly, and fiber optic wiring Lead and coach employees on detailed electrical operations, testing, referencing, and all the associated process specifications. Ability to operate and coach the proper usage of electrical test equipment to include but not limited to the following: TDRs, light loss testers, Milli-Ohm Meters, DMMs, and Oscilloscopes Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior Leadership Requirement for all site programs Able to work with minimal oversight and deliver positive results, while adhering to all Safety and FOD Pro's and Processes. Strong interpersonal skills in a teaching/coaching environment Structures Workplace Coach (WPC) Coach and develop employees in all Structures and General mechanic-based aircraft skills Experience with major structural modifications and articulate, inform and coach detailed operations to include: Use of common hand tools such as: drills, reamers, deburrers, files, rivet guns, bucking bars Setup and use a variety of precision measuring instruments such as dial indicators, micrometers, gauges, protractors, and calipers Experience with various types of materials such as aluminum, titanium, stainless steel, carbon fiber, fiberglass. Experience in the use of tooling assemblies and fixtures for depot level Modifications and Repair of Structural Components. Knowledgeable of the differences between primary and secondary structures Assemble aircraft structures and associated components with the aid of jigs and fixtures by: drilling, filing, filling, honing, reaming, counter-sinking, dimpling, burring and fastening Perform close tolerance layout, drilling, reaming, removal and installation of critical support structures and fracture critical components while performing structural Modifications and Repair. Perform close tolerance assembly operations such as: shimming, fitting, trimming, and aligning where variances may occur considerably from one assembly to another as with fairings and the mating of major structural assemblies Ability to perform the following: replace ribs, stiffeners, stringers in skinned assemblies establishing from blueprints with firm callouts, butt, center, chord, station and water lines Pickup blind hole locations for blank parts from existing structure, correct cans, buckles, wrinkles in outer skins and perform cold working, shot peen, and freeze plug processes Operate equipment such as brakes, grinders, band saws, and presses Identify different types of corrosion, clean and treat corrosion, remove damaged areas, fabricate parts to repair damaged area, determine rivet patterns, layouts, perform shop painting Experience with general mechanics and articulate repairs of aircraft components including flight controls, engines, hydraulics, pneumatics, and fuel systems and mechanical components Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions Apply expertise in restoring equipment condition and or operation Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior leadership. requirement for all site programs Deliver positive results, while adhering to all Safety and FOD Pro's and Processes Strong interpersonal skills in a teaching/coaching environment Basic Qualifications (Required Skills/Experience): 10+ years of modification experience at an airline or an MRO 5+ years of experience with understanding of TUI's, REDARS, PSDS, IETMs and HMS databases 5+ years of experience reading engineering blueprints/drawings Experience working with a GOLD Uniface/GOLDesp application computing system Ability to work variable shifts, including weekends, holidays, and overtime Ability to travel 10% of the time Preferred Qualifications (Desired Skills/Experience): Electrical: 5+ years of aircraft Avionics experience on a minimum of 2 aircraft platforms Structures: General Mechanic Experience is desired Ability to deliver information verbally in one on one or group settings Ability to learn and teach multiple platforms Knowledge of QMS and assist in root cause corrective actions for any quality defects Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: 79,050 - 106,950 Applications for this position will be accepted until Sept. 04, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
09/03/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security (BDS) and Boeing Global Services (BGS) are looking for Experienced Workplace Coaches to join our Executive Fleet and Workforce Planning and Development teams in San Antonio, TX. In this role, you will be critical in the effort to reduce rework, improve first time quality, promote safety and initiate process improvement across all Aircraft Programs at the San Antonio site. Your aircraft electrical and structural expertise will be instrumental in building a strong versatile work force that will bolster production. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location (San Antonio, TX). This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Top Secret clearance Post Start is required Special Program Access or other Government Access Requirements are mandatory for this position Position Responsibilities: Electrical Workplace Coach (WPC) Learn and develop employees in all electrical and avionics-based aircraft skills Experience with major electrical aircraft modifications and be able to articulate, teach, and coach detailed operations therein to include but not limited to the following: sealing, wrapping, bonding, soldering, tying, crimping, terminations, and the closure of wire harnesses, shielded wires, coaxial cables, cable routing/assembly, and fiber optic wiring Lead and coach employees on detailed electrical operations, testing, referencing, and all the associated process specifications. Ability to operate and coach the proper usage of electrical test equipment to include but not limited to the following: TDRs, light loss testers, Milli-Ohm Meters, DMMs, and Oscilloscopes Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior Leadership Requirement for all site programs Able to work with minimal oversight and deliver positive results, while adhering to all Safety and FOD Pro's and Processes. Strong interpersonal skills in a teaching/coaching environment Structures Workplace Coach (WPC) Coach and develop employees in all Structures and General mechanic-based aircraft skills Experience with major structural modifications and articulate, inform and coach detailed operations to include: Use of common hand tools such as: drills, reamers, deburrers, files, rivet guns, bucking bars Setup and use a variety of precision measuring instruments such as dial indicators, micrometers, gauges, protractors, and calipers Experience with various types of materials such as aluminum, titanium, stainless steel, carbon fiber, fiberglass. Experience in the use of tooling assemblies and fixtures for depot level Modifications and Repair of Structural Components. Knowledgeable of the differences between primary and secondary structures Assemble aircraft structures and associated components with the aid of jigs and fixtures by: drilling, filing, filling, honing, reaming, counter-sinking, dimpling, burring and fastening Perform close tolerance layout, drilling, reaming, removal and installation of critical support structures and fracture critical components while performing structural Modifications and Repair. Perform close tolerance assembly operations such as: shimming, fitting, trimming, and aligning where variances may occur considerably from one assembly to another as with fairings and the mating of major structural assemblies Ability to perform the following: replace ribs, stiffeners, stringers in skinned assemblies establishing from blueprints with firm callouts, butt, center, chord, station and water lines Pickup blind hole locations for blank parts from existing structure, correct cans, buckles, wrinkles in outer skins and perform cold working, shot peen, and freeze plug processes Operate equipment such as brakes, grinders, band saws, and presses Identify different types of corrosion, clean and treat corrosion, remove damaged areas, fabricate parts to repair damaged area, determine rivet patterns, layouts, perform shop painting Experience with general mechanics and articulate repairs of aircraft components including flight controls, engines, hydraulics, pneumatics, and fuel systems and mechanical components Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions Apply expertise in restoring equipment condition and or operation Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior leadership. requirement for all site programs Deliver positive results, while adhering to all Safety and FOD Pro's and Processes Strong interpersonal skills in a teaching/coaching environment Basic Qualifications (Required Skills/Experience): 10+ years of modification experience at an airline or an MRO 5+ years of experience with understanding of TUI's, REDARS, PSDS, IETMs and HMS databases 5+ years of experience reading engineering blueprints/drawings Experience working with a GOLD Uniface/GOLDesp application computing system Ability to work variable shifts, including weekends, holidays, and overtime Ability to travel 10% of the time Preferred Qualifications (Desired Skills/Experience): Electrical: 5+ years of aircraft Avionics experience on a minimum of 2 aircraft platforms Structures: General Mechanic Experience is desired Ability to deliver information verbally in one on one or group settings Ability to learn and teach multiple platforms Knowledge of QMS and assist in root cause corrective actions for any quality defects Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: 79,050 - 106,950 Applications for this position will be accepted until Sept. 04, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking a S oftware Engineer- Embedded (Mid-Level, Senior) to join the Phantom Works Weapons Software team located in Saint Charles, MO. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. The Phantom Works Weapons Software Team develops software for groundbreaking weapon systems, including hypersonic and advanced precision weapons. The PW Weapons software team develops and maintains the Operational Flight Programming (OFP) software and other real-time embedded software products that fulfill the mission processing functionality of the weapon systems. The OFP software is written in C/C++ with an emphasis on open architectures. The team performs development using the agile methodology and the Secure Digital Transformation Environment tool stack (Gitlab, Artifactory). The Software Engineer will collaborate with a diverse engineering team to design, develop, and deploy operational flight software for precision-guided weapon systems. This individual will be responsible for the design, development, and test of HDL, Linux Driver development, or Linux Kernel configuration. Our teams are currently hiring for a broad range of experience levels including; Mid-Level and Senior Software Engineers. Position Responsibilities: Leads the design, development, test, debugging and maintenance of software that is integrated into embedded devices and systems and meets industry, customer, safety and regulation standards. Leads review, analyses, and translation of customer requirements into the design of software products for embedded devices and systems. Reviews code for embedded systems software to run on specific specialized hardware. Leads integration of embedded software with hardware components. Advises on software and hardware integration domains. Leads analyses, monitoring and improvement of the efficiency and stability of embedded software systems. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): 3+ years of experience in HDL, C, C++, C#, python 3+ years of experience in Linux, VxWorks, Green Hills Integrity or another RTOS 3+ years of experience in gcc and git or similar version control system 3+ years of experience in Agile software development, software architecture development, open architectures Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 9 or more years' related work experience or an equivalent combination of education and experience Knowledge of specification format requirements, guidelines, and change control processes. Understanding of relationship between specifications/standards and aircraft/product certification systems. Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables. Knowledge of programming languages (e.g., C#, C++, C, Assembly). Knowledge of communications, networking, and protocols (e.g., Transport Control Protocol/Internet Protocol (TCP/IP), File Transfer Protocol (FTP), Extensible Mark-up Language (XML). Knowledge of computing equipment and its operating systems (e.g., Windows, Unix, Linux). Knowledge of software development and testing tools (e.g., editors, compilers, linkers, desktop simulations, configuration management tools, requirements management tools) capability and usage. Ability to apply knowledge of database engines to the design of databases and reporting structures. Ability to integrate hardware and software components into a functional system. Knowledge of software testing and usability theory. Knowledge of testing, usability practices. Ability to write and execute test scripts and perform usability analyses. Knowledge of general and real-time software development and testing tools, capability and usage. Real-time tool examples include cross compilers, target debuggers and test/performance instrumentation. Knowledge of domains, characteristics, constraints and products that require real-time software and influence architecture, requirements, interfaces, designs, and integration/test approaches. Real-time domain examples include control systems, human interfaces and signal processing. Examples of characteristics and constraints that impact real-time software include hardware/software timing, sizing, bandwidth, optimization and synchronization. Examples of products include aircraft, missiles, airborne/shipboard/space systems/ground-based operational systems and real-time support systems such as simulators and training systems. Knowledge of real-time target environments, including processor and network architectures, communication protocols, simulation frameworks and electrical interfaces. Ability to build, integrate and troubleshoot software components. Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle. Knowledge of software architecture and design methodologies. Ability to synthesize software architectures and designs that meet requirements, characteristics and constraints. Knowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the Boeing companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools. The ability to use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job. This includes the ability to locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective. Travel: 10% Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Mid-Level: $110,500.00 - $149,500.00 Summary pay range for Senior: $132,600.00 - $179,400.00 Applications for this position will be accepted until Sept. 05, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift . click apply for full job details
09/03/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking a S oftware Engineer- Embedded (Mid-Level, Senior) to join the Phantom Works Weapons Software team located in Saint Charles, MO. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. The Phantom Works Weapons Software Team develops software for groundbreaking weapon systems, including hypersonic and advanced precision weapons. The PW Weapons software team develops and maintains the Operational Flight Programming (OFP) software and other real-time embedded software products that fulfill the mission processing functionality of the weapon systems. The OFP software is written in C/C++ with an emphasis on open architectures. The team performs development using the agile methodology and the Secure Digital Transformation Environment tool stack (Gitlab, Artifactory). The Software Engineer will collaborate with a diverse engineering team to design, develop, and deploy operational flight software for precision-guided weapon systems. This individual will be responsible for the design, development, and test of HDL, Linux Driver development, or Linux Kernel configuration. Our teams are currently hiring for a broad range of experience levels including; Mid-Level and Senior Software Engineers. Position Responsibilities: Leads the design, development, test, debugging and maintenance of software that is integrated into embedded devices and systems and meets industry, customer, safety and regulation standards. Leads review, analyses, and translation of customer requirements into the design of software products for embedded devices and systems. Reviews code for embedded systems software to run on specific specialized hardware. Leads integration of embedded software with hardware components. Advises on software and hardware integration domains. Leads analyses, monitoring and improvement of the efficiency and stability of embedded software systems. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): 3+ years of experience in HDL, C, C++, C#, python 3+ years of experience in Linux, VxWorks, Green Hills Integrity or another RTOS 3+ years of experience in gcc and git or similar version control system 3+ years of experience in Agile software development, software architecture development, open architectures Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 9 or more years' related work experience or an equivalent combination of education and experience Knowledge of specification format requirements, guidelines, and change control processes. Understanding of relationship between specifications/standards and aircraft/product certification systems. Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables. Knowledge of programming languages (e.g., C#, C++, C, Assembly). Knowledge of communications, networking, and protocols (e.g., Transport Control Protocol/Internet Protocol (TCP/IP), File Transfer Protocol (FTP), Extensible Mark-up Language (XML). Knowledge of computing equipment and its operating systems (e.g., Windows, Unix, Linux). Knowledge of software development and testing tools (e.g., editors, compilers, linkers, desktop simulations, configuration management tools, requirements management tools) capability and usage. Ability to apply knowledge of database engines to the design of databases and reporting structures. Ability to integrate hardware and software components into a functional system. Knowledge of software testing and usability theory. Knowledge of testing, usability practices. Ability to write and execute test scripts and perform usability analyses. Knowledge of general and real-time software development and testing tools, capability and usage. Real-time tool examples include cross compilers, target debuggers and test/performance instrumentation. Knowledge of domains, characteristics, constraints and products that require real-time software and influence architecture, requirements, interfaces, designs, and integration/test approaches. Real-time domain examples include control systems, human interfaces and signal processing. Examples of characteristics and constraints that impact real-time software include hardware/software timing, sizing, bandwidth, optimization and synchronization. Examples of products include aircraft, missiles, airborne/shipboard/space systems/ground-based operational systems and real-time support systems such as simulators and training systems. Knowledge of real-time target environments, including processor and network architectures, communication protocols, simulation frameworks and electrical interfaces. Ability to build, integrate and troubleshoot software components. Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle. Knowledge of software architecture and design methodologies. Ability to synthesize software architectures and designs that meet requirements, characteristics and constraints. Knowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the Boeing companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools. The ability to use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job. This includes the ability to locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective. Travel: 10% Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Mid-Level: $110,500.00 - $149,500.00 Summary pay range for Senior: $132,600.00 - $179,400.00 Applications for this position will be accepted until Sept. 05, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift . click apply for full job details
QUALITY DIRECTOR Department: Quality Reports To: COO Pay Grade: Salary Supervises: Quality Department FLSA Classification: Exempt Approved By: Human Resources Administrator Revision Date: 8.25.2025 JOB SUMMARY The Quality Director focuses on developing higher-level quality systems, executing daily quality department operations, and ensuring overall compliance. They are responsible for leading and overseeing all aspects of quality control and assurance within the facility. The Quality Director plays a crucial role in ensuring that the products produced by the Company meet or exceed customer expectations and industry standards. They are responsible for continuously maintaining and improving the quality of products manufactured. The Quality Director is also responsible for overseeing and promoting a culture of quality throughout all we do. ESSENTIAL DUTIES AND RESPONSIBILITIES Develops and implements the Company's quality vision, goals, and long-term strategy aligned with machining industry standards. Drives a culture of continuous improvement, precision, and accountability across the organization. Leads the Quality Management System (QMS), ensuring compliance with ISO 9001, AS9100, IATF 16949 , and other relevant certifications. Manages internal and external audits, ensuring compliance with customer, industry, and regulatory requirements. Oversees Corrective and Preventive Actions (CAPA) and Root Cause Analysis (RCA). Implements robust in-process inspection systems (CMM, optical, surface measurement, SPC, etc.). Monitors and reduces scrap, rework, and warranty issues through data-driven analysis. Drives First Article Inspection (FAI) and Production Part Approval Process (PPAP) when required. Leads the Quality Department, including engineers, inspectors, and technicians. Provides training on inspection techniques, GD&T (Geometric Dimensioning & Tolerancing), and quality tools. Mentors employees to strengthen problem-solving and continuous improvement skills (Six Sigma, Lean, Kaizen). Act as the primary quality representative with customers during audits, product launches, and issue resolution. Manages supplier quality programs: qualification, audits, performance monitoring, and corrective actions. Ensures that customer complaints and nonconformances are resolved promptly and effectively. Defines and monitors KPIs such as PPM (Parts Per Million defect rate), OEE (Overall Equipment Effectiveness), and on-time delivery. Reports quality performance and trends to senior leadership. Develops, implements, and maintains the Company's ISO-certified Quality Management System (ISO 9001, ISO 13485, AS9100, or IATF 16949, depending on industry sector). Ensures compliance with ISO standards and customer-specific quality requirements through robust documentation, audits, and management reviews. Drives continual improvement initiatives in alignment with ISO principles of risk-based thinking, process approach, and customer focus. Provides ISO-specific training across the organization, ensuring employees understand their role in maintaining certification and compliance. Mentors staff in ISO quality tools such as Root Cause Analysis, Risk Management, and Statistical Process Control (SPC). The above list outlines the general details that describe the position's principles and essential functions. It shall not be construed as the only duties assigned to the job. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. MINIMUM QUALIFICATIONS Bachelor's degree or equivalent. Great knowledge of industry-specific quality standards and regulations. Great problem-solving and analytical skills. 5+ years' experience in quality control, assurance, or a similar field. PREFERRED QUALIFICATIONS Master's degree in mechanical engineering, industrial engineering, or a related field. Apprenticeship or vocational training. 10+ years' experience in quality control or assurance. Proven experience in quality management. Lean Six Sigma Black Belt PHYSICAL AND MENTAL DEMANDS The physical and mental demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Stand, walk, push, pull, reach overhead, and bend to the floor. Exert 1 to 25 pounds of force 5% of the time. Exert 26 to 50 pounds of force 5% of the time. Exert 50-plus pounds of force 5% of the time. Reading machine dial gauges, blueprints, precision measuring instruments, and computer screens requires near acuity and accommodation. Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals. Communicate effectively with employees. WORKING ENVIRONMENT The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Primarily an indoor shop-based position, but with an enclosed office on the shop floor. Moderate noise levels from operating machines. Physical hazards from moving equipment and machine parts. Machining fumes, dust, and mist. Skin exposed to oils and cutting fluids. Compensation details: 00 Yearly Salary PIe16b63dc72d7-1497
09/03/2025
Full time
QUALITY DIRECTOR Department: Quality Reports To: COO Pay Grade: Salary Supervises: Quality Department FLSA Classification: Exempt Approved By: Human Resources Administrator Revision Date: 8.25.2025 JOB SUMMARY The Quality Director focuses on developing higher-level quality systems, executing daily quality department operations, and ensuring overall compliance. They are responsible for leading and overseeing all aspects of quality control and assurance within the facility. The Quality Director plays a crucial role in ensuring that the products produced by the Company meet or exceed customer expectations and industry standards. They are responsible for continuously maintaining and improving the quality of products manufactured. The Quality Director is also responsible for overseeing and promoting a culture of quality throughout all we do. ESSENTIAL DUTIES AND RESPONSIBILITIES Develops and implements the Company's quality vision, goals, and long-term strategy aligned with machining industry standards. Drives a culture of continuous improvement, precision, and accountability across the organization. Leads the Quality Management System (QMS), ensuring compliance with ISO 9001, AS9100, IATF 16949 , and other relevant certifications. Manages internal and external audits, ensuring compliance with customer, industry, and regulatory requirements. Oversees Corrective and Preventive Actions (CAPA) and Root Cause Analysis (RCA). Implements robust in-process inspection systems (CMM, optical, surface measurement, SPC, etc.). Monitors and reduces scrap, rework, and warranty issues through data-driven analysis. Drives First Article Inspection (FAI) and Production Part Approval Process (PPAP) when required. Leads the Quality Department, including engineers, inspectors, and technicians. Provides training on inspection techniques, GD&T (Geometric Dimensioning & Tolerancing), and quality tools. Mentors employees to strengthen problem-solving and continuous improvement skills (Six Sigma, Lean, Kaizen). Act as the primary quality representative with customers during audits, product launches, and issue resolution. Manages supplier quality programs: qualification, audits, performance monitoring, and corrective actions. Ensures that customer complaints and nonconformances are resolved promptly and effectively. Defines and monitors KPIs such as PPM (Parts Per Million defect rate), OEE (Overall Equipment Effectiveness), and on-time delivery. Reports quality performance and trends to senior leadership. Develops, implements, and maintains the Company's ISO-certified Quality Management System (ISO 9001, ISO 13485, AS9100, or IATF 16949, depending on industry sector). Ensures compliance with ISO standards and customer-specific quality requirements through robust documentation, audits, and management reviews. Drives continual improvement initiatives in alignment with ISO principles of risk-based thinking, process approach, and customer focus. Provides ISO-specific training across the organization, ensuring employees understand their role in maintaining certification and compliance. Mentors staff in ISO quality tools such as Root Cause Analysis, Risk Management, and Statistical Process Control (SPC). The above list outlines the general details that describe the position's principles and essential functions. It shall not be construed as the only duties assigned to the job. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. MINIMUM QUALIFICATIONS Bachelor's degree or equivalent. Great knowledge of industry-specific quality standards and regulations. Great problem-solving and analytical skills. 5+ years' experience in quality control, assurance, or a similar field. PREFERRED QUALIFICATIONS Master's degree in mechanical engineering, industrial engineering, or a related field. Apprenticeship or vocational training. 10+ years' experience in quality control or assurance. Proven experience in quality management. Lean Six Sigma Black Belt PHYSICAL AND MENTAL DEMANDS The physical and mental demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Stand, walk, push, pull, reach overhead, and bend to the floor. Exert 1 to 25 pounds of force 5% of the time. Exert 26 to 50 pounds of force 5% of the time. Exert 50-plus pounds of force 5% of the time. Reading machine dial gauges, blueprints, precision measuring instruments, and computer screens requires near acuity and accommodation. Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals. Communicate effectively with employees. WORKING ENVIRONMENT The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Primarily an indoor shop-based position, but with an enclosed office on the shop floor. Moderate noise levels from operating machines. Physical hazards from moving equipment and machine parts. Machining fumes, dust, and mist. Skin exposed to oils and cutting fluids. Compensation details: 00 Yearly Salary PIe16b63dc72d7-1497
Job Description At Boeing, we innovate and collaborate to make the world a better place. Were committed to fostering an environment for every teammate thats welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) team is seeking a Senior Design and Analysis Engineer (Communication / Network Systems Design) located in El Segundo, CA Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. Here, youll work alongside more than 170,000 exceptional people focused on bringing great products and services to the market. By building a career at Boeing, youll have the opportunity to grow your skills, create relationships around the world and help shape the future of aerospace. Boeingoffers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications Leads work to test and validate to ensure system designs meet operational and functional requirements Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle Researches technology advances for potential application to company business needs Makes recommendations for technology investments This position is expected to be 100% onsite. The selected candidate will be required to work onsite at El Segundo, CA. This position requires an active U.S. Top Secret (SCI) Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Active Top Secret (SCI) Basic Qualifications (Required Skills and Experience): Bachelor of Science degree from an accredited course of study in engineering, chemistry, physics, mathematics, data science, or computer science Level 4: 9+ years of work-related experience with a bachelors degree OR 7+ years of work-related experience with a masters degree Communications and network concepts and principles Knowledge of and the ability to utilize communications and network tests Systems installation and performance experience Preferred Qualifications (Desired Skills and Experience): Knowledge of communications and network concepts Advanced experience in design concepts and techniques engineering, Design for Manufacture/Assembly Experience various engineering disciplines such as electrical, mechanical and systems Typical Education & Experience: Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st shift At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $128,350 - $173,650 Applications for this position will be accepted until Sept. 15, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a U.S. Person as defined by 22 C.F.R. 120.15 is required. U.S. Person includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Top Secret/SCI Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Required Preferred Job Industries Other
09/03/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. Were committed to fostering an environment for every teammate thats welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) team is seeking a Senior Design and Analysis Engineer (Communication / Network Systems Design) located in El Segundo, CA Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. Here, youll work alongside more than 170,000 exceptional people focused on bringing great products and services to the market. By building a career at Boeing, youll have the opportunity to grow your skills, create relationships around the world and help shape the future of aerospace. Boeingoffers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. Position Responsibilities: Leads work with customers to develop and document complex electronic and electrical system requirements Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications Leads work to test and validate to ensure system designs meet operational and functional requirements Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle Researches technology advances for potential application to company business needs Makes recommendations for technology investments This position is expected to be 100% onsite. The selected candidate will be required to work onsite at El Segundo, CA. This position requires an active U.S. Top Secret (SCI) Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Active Top Secret (SCI) Basic Qualifications (Required Skills and Experience): Bachelor of Science degree from an accredited course of study in engineering, chemistry, physics, mathematics, data science, or computer science Level 4: 9+ years of work-related experience with a bachelors degree OR 7+ years of work-related experience with a masters degree Communications and network concepts and principles Knowledge of and the ability to utilize communications and network tests Systems installation and performance experience Preferred Qualifications (Desired Skills and Experience): Knowledge of communications and network concepts Advanced experience in design concepts and techniques engineering, Design for Manufacture/Assembly Experience various engineering disciplines such as electrical, mechanical and systems Typical Education & Experience: Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st shift At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $128,350 - $173,650 Applications for this position will be accepted until Sept. 15, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a U.S. Person as defined by 22 C.F.R. 120.15 is required. U.S. Person includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Top Secret/SCI Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Required Preferred Job Industries Other
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security (BDS) and Boeing Global Services (BGS) are looking for Experienced Workplace Coaches to join our Executive Fleet and Workforce Planning and Development teams in San Antonio, TX. In this role, you will be critical in the effort to reduce rework, improve first time quality, promote safety and initiate process improvement across all Aircraft Programs at the San Antonio site. Your aircraft electrical and structural expertise will be instrumental in building a strong versatile work force that will bolster production. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location (San Antonio, TX). This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Top Secret clearance Post Start is required Special Program Access or other Government Access Requirements are mandatory for this position Position Responsibilities: Electrical Workplace Coach (WPC) Learn and develop employees in all electrical and avionics-based aircraft skills Experience with major electrical aircraft modifications and be able to articulate, teach, and coach detailed operations therein to include but not limited to the following: sealing, wrapping, bonding, soldering, tying, crimping, terminations, and the closure of wire harnesses, shielded wires, coaxial cables, cable routing/assembly, and fiber optic wiring Lead and coach employees on detailed electrical operations, testing, referencing, and all the associated process specifications. Ability to operate and coach the proper usage of electrical test equipment to include but not limited to the following: TDRs, light loss testers, Milli-Ohm Meters, DMMs, and Oscilloscopes Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior Leadership Requirement for all site programs Able to work with minimal oversight and deliver positive results, while adhering to all Safety and FOD Pro's and Processes. Strong interpersonal skills in a teaching/coaching environment Structures Workplace Coach (WPC) Coach and develop employees in all Structures and General mechanic-based aircraft skills Experience with major structural modifications and articulate, inform and coach detailed operations to include: Use of common hand tools such as: drills, reamers, deburrers, files, rivet guns, bucking bars Setup and use a variety of precision measuring instruments such as dial indicators, micrometers, gauges, protractors, and calipers Experience with various types of materials such as aluminum, titanium, stainless steel, carbon fiber, fiberglass. Experience in the use of tooling assemblies and fixtures for depot level Modifications and Repair of Structural Components. Knowledgeable of the differences between primary and secondary structures Assemble aircraft structures and associated components with the aid of jigs and fixtures by: drilling, filing, filling, honing, reaming, counter-sinking, dimpling, burring and fastening Perform close tolerance layout, drilling, reaming, removal and installation of critical support structures and fracture critical components while performing structural Modifications and Repair. Perform close tolerance assembly operations such as: shimming, fitting, trimming, and aligning where variances may occur considerably from one assembly to another as with fairings and the mating of major structural assemblies Ability to perform the following: replace ribs, stiffeners, stringers in skinned assemblies establishing from blueprints with firm callouts, butt, center, chord, station and water lines Pickup blind hole locations for blank parts from existing structure, correct cans, buckles, wrinkles in outer skins and perform cold working, shot peen, and freeze plug processes Operate equipment such as brakes, grinders, band saws, and presses Identify different types of corrosion, clean and treat corrosion, remove damaged areas, fabricate parts to repair damaged area, determine rivet patterns, layouts, perform shop painting Experience with general mechanics and articulate repairs of aircraft components including flight controls, engines, hydraulics, pneumatics, and fuel systems and mechanical components Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions Apply expertise in restoring equipment condition and or operation Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior leadership. requirement for all site programs Deliver positive results, while adhering to all Safety and FOD Pro's and Processes Strong interpersonal skills in a teaching/coaching environment Basic Qualifications (Required Skills/Experience): 10+ years of modification experience at an airline or an MRO 5+ years of experience with understanding of TUI's, REDARS, PSDS, IETMs and HMS databases 5+ years of experience reading engineering blueprints/drawings Experience working with a GOLD Uniface/GOLDesp application computing system Ability to work variable shifts, including weekends, holidays, and overtime Ability to travel 10% of the time Preferred Qualifications (Desired Skills/Experience): Electrical: 5+ years of aircraft Avionics experience on a minimum of 2 aircraft platforms Structures: General Mechanic Experience is desired Ability to deliver information verbally in one on one or group settings Ability to learn and teach multiple platforms Knowledge of QMS and assist in root cause corrective actions for any quality defects Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: 79,050 - 106,950 Applications for this position will be accepted until Sept. 04, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
09/03/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security (BDS) and Boeing Global Services (BGS) are looking for Experienced Workplace Coaches to join our Executive Fleet and Workforce Planning and Development teams in San Antonio, TX. In this role, you will be critical in the effort to reduce rework, improve first time quality, promote safety and initiate process improvement across all Aircraft Programs at the San Antonio site. Your aircraft electrical and structural expertise will be instrumental in building a strong versatile work force that will bolster production. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location (San Antonio, TX). This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Top Secret clearance Post Start is required Special Program Access or other Government Access Requirements are mandatory for this position Position Responsibilities: Electrical Workplace Coach (WPC) Learn and develop employees in all electrical and avionics-based aircraft skills Experience with major electrical aircraft modifications and be able to articulate, teach, and coach detailed operations therein to include but not limited to the following: sealing, wrapping, bonding, soldering, tying, crimping, terminations, and the closure of wire harnesses, shielded wires, coaxial cables, cable routing/assembly, and fiber optic wiring Lead and coach employees on detailed electrical operations, testing, referencing, and all the associated process specifications. Ability to operate and coach the proper usage of electrical test equipment to include but not limited to the following: TDRs, light loss testers, Milli-Ohm Meters, DMMs, and Oscilloscopes Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior Leadership Requirement for all site programs Able to work with minimal oversight and deliver positive results, while adhering to all Safety and FOD Pro's and Processes. Strong interpersonal skills in a teaching/coaching environment Structures Workplace Coach (WPC) Coach and develop employees in all Structures and General mechanic-based aircraft skills Experience with major structural modifications and articulate, inform and coach detailed operations to include: Use of common hand tools such as: drills, reamers, deburrers, files, rivet guns, bucking bars Setup and use a variety of precision measuring instruments such as dial indicators, micrometers, gauges, protractors, and calipers Experience with various types of materials such as aluminum, titanium, stainless steel, carbon fiber, fiberglass. Experience in the use of tooling assemblies and fixtures for depot level Modifications and Repair of Structural Components. Knowledgeable of the differences between primary and secondary structures Assemble aircraft structures and associated components with the aid of jigs and fixtures by: drilling, filing, filling, honing, reaming, counter-sinking, dimpling, burring and fastening Perform close tolerance layout, drilling, reaming, removal and installation of critical support structures and fracture critical components while performing structural Modifications and Repair. Perform close tolerance assembly operations such as: shimming, fitting, trimming, and aligning where variances may occur considerably from one assembly to another as with fairings and the mating of major structural assemblies Ability to perform the following: replace ribs, stiffeners, stringers in skinned assemblies establishing from blueprints with firm callouts, butt, center, chord, station and water lines Pickup blind hole locations for blank parts from existing structure, correct cans, buckles, wrinkles in outer skins and perform cold working, shot peen, and freeze plug processes Operate equipment such as brakes, grinders, band saws, and presses Identify different types of corrosion, clean and treat corrosion, remove damaged areas, fabricate parts to repair damaged area, determine rivet patterns, layouts, perform shop painting Experience with general mechanics and articulate repairs of aircraft components including flight controls, engines, hydraulics, pneumatics, and fuel systems and mechanical components Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions Apply expertise in restoring equipment condition and or operation Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation Demonstrate/coach how to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair Report out to Site and Senior leadership. requirement for all site programs Deliver positive results, while adhering to all Safety and FOD Pro's and Processes Strong interpersonal skills in a teaching/coaching environment Basic Qualifications (Required Skills/Experience): 10+ years of modification experience at an airline or an MRO 5+ years of experience with understanding of TUI's, REDARS, PSDS, IETMs and HMS databases 5+ years of experience reading engineering blueprints/drawings Experience working with a GOLD Uniface/GOLDesp application computing system Ability to work variable shifts, including weekends, holidays, and overtime Ability to travel 10% of the time Preferred Qualifications (Desired Skills/Experience): Electrical: 5+ years of aircraft Avionics experience on a minimum of 2 aircraft platforms Structures: General Mechanic Experience is desired Ability to deliver information verbally in one on one or group settings Ability to learn and teach multiple platforms Knowledge of QMS and assist in root cause corrective actions for any quality defects Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: 79,050 - 106,950 Applications for this position will be accepted until Sept. 04, 2025 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
SALARY RANGE: $28.00-$30.00 PER HOUR JOB SUMMARY: Seasonal Transit Operators are responsible for the safe operation of buses and transportation of passengers over assigned routes throughout Park City and Summit County during high volume months. This position entails performing various related duties and specialized tasks as assigned, including Route Operations Coordinator, operator training, and paratransit operations. This is an at-will position that will conclude at the end of the winter season. TYPICAL DUTIES: Responsible for safely and efficiently operating buses on designated routes during daily shift assignments throughout Park City and Summit County. Performs daily pre-trip and post-trip inspections of vehicles following Department of Transportation (DOT) and Federal Transportation Administration (FTA) regulations and communicates safety concerns and maintenance needs both verbally and in writing to the Fleet department to ensure the maximum safety of vehicles during operation. Performs basic vehicle maintenance on a daily basis, such as maintaining appropriate levels of fuel, radiator coolant, oil, tire pressure, and cleaning the interior and exterior of the vehicle, including sweeping/mopping the interior as necessary, searching for lost articles, and cleaning windshield and windows. Delivers superior customer service and functions as an ambassador for the City through professional and courteous interactions with coworkers, the public, and users of the transit system while adhering to all City and departmental safety policies and procedures. Physically assists passengers boarding and unloading with different types of equipment, such as skis, bicycles, luggage, wheelchairs, etc., as requested and complies with Americans with Disabilities Act (ADA) requirements for transporting disabled passengers, such as announcing stops, offering assistance, securing wheelchairs, and equipment, etc. As assigned, serves as the Mobility (Paratransit/Senior Service) Dispatcher position which includes, but is not limited to, answering phone calls, taking reservations, scheduling rides, responding to passenger requests and concerns, monitoring the two-way radio traffic of paratransit operators, resolving on-route issues and scheduling conflicts, and makes necessary decisions required for the smooth operation of the system with excellent judgment and professionalism. Other duties as assigned. MINIMUM QUALIFICATIONS: Must be at least 21 years of age. Ability to pass and maintain the Department of Transportation (DOT) Physical Requirements. Safety-sensitive position requires mandatory and/or random drug and alcohol screenings. Ability to pass and maintain valid Class B Commercial Driver's License with passenger and air brake endorsements. Safe driver with a valid driver's license and no more than 2 moving violations in the past 3 years. No convictions for driving under the influence of alcohol or any drugs within the past 10 years. Able and willing to work day or evening shifts, weekends, and holiday shifts as assigned. Able to prepare legible written reports of incidents and accidents. PREFERRED QUALIFICATIONS: Bilingual in English and Spanish. At least one winter season as a Transit Operator with Park City Transit. Working knowledge of Park City's transit routes and operations. Skilled and knowledgeable in the safe and efficient operation of multiple types and sizes of transit vehicles, including diesel and electric power plants, body-on-chassis vehicles, and low-floor transit coaches of varying lengths. WORKING CONDITIONS: The employee may occasionally be required to lift and move up to 50 pounds. Specific vision abilities required by this job for safe maneuvering and operation of City buses and other vehicles. Ability to read traffic signs, observe passengers, and operate a vehicle during day and night-time conditions. The employee works near moving vehicles, machinery, & mechanical parts. Work is performed inside a bus and outdoor settings, in all weather conditions including extreme temperatures day and/or night. Periodic/considerable exposure to stressful situations including passenger questions, complaints, and general transit operations and City information inquiries. The noise level includes diesel engine noise, and passenger noise and is usually low to moderate. Non-traditional working hours which include evenings and weekends. Occasional on-call working hours including evenings and weekends. Work includes day, swing, and night shifts, holidays, and weekends. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required by personnel so classified. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. PIb5-2746
09/03/2025
Full time
SALARY RANGE: $28.00-$30.00 PER HOUR JOB SUMMARY: Seasonal Transit Operators are responsible for the safe operation of buses and transportation of passengers over assigned routes throughout Park City and Summit County during high volume months. This position entails performing various related duties and specialized tasks as assigned, including Route Operations Coordinator, operator training, and paratransit operations. This is an at-will position that will conclude at the end of the winter season. TYPICAL DUTIES: Responsible for safely and efficiently operating buses on designated routes during daily shift assignments throughout Park City and Summit County. Performs daily pre-trip and post-trip inspections of vehicles following Department of Transportation (DOT) and Federal Transportation Administration (FTA) regulations and communicates safety concerns and maintenance needs both verbally and in writing to the Fleet department to ensure the maximum safety of vehicles during operation. Performs basic vehicle maintenance on a daily basis, such as maintaining appropriate levels of fuel, radiator coolant, oil, tire pressure, and cleaning the interior and exterior of the vehicle, including sweeping/mopping the interior as necessary, searching for lost articles, and cleaning windshield and windows. Delivers superior customer service and functions as an ambassador for the City through professional and courteous interactions with coworkers, the public, and users of the transit system while adhering to all City and departmental safety policies and procedures. Physically assists passengers boarding and unloading with different types of equipment, such as skis, bicycles, luggage, wheelchairs, etc., as requested and complies with Americans with Disabilities Act (ADA) requirements for transporting disabled passengers, such as announcing stops, offering assistance, securing wheelchairs, and equipment, etc. As assigned, serves as the Mobility (Paratransit/Senior Service) Dispatcher position which includes, but is not limited to, answering phone calls, taking reservations, scheduling rides, responding to passenger requests and concerns, monitoring the two-way radio traffic of paratransit operators, resolving on-route issues and scheduling conflicts, and makes necessary decisions required for the smooth operation of the system with excellent judgment and professionalism. Other duties as assigned. MINIMUM QUALIFICATIONS: Must be at least 21 years of age. Ability to pass and maintain the Department of Transportation (DOT) Physical Requirements. Safety-sensitive position requires mandatory and/or random drug and alcohol screenings. Ability to pass and maintain valid Class B Commercial Driver's License with passenger and air brake endorsements. Safe driver with a valid driver's license and no more than 2 moving violations in the past 3 years. No convictions for driving under the influence of alcohol or any drugs within the past 10 years. Able and willing to work day or evening shifts, weekends, and holiday shifts as assigned. Able to prepare legible written reports of incidents and accidents. PREFERRED QUALIFICATIONS: Bilingual in English and Spanish. At least one winter season as a Transit Operator with Park City Transit. Working knowledge of Park City's transit routes and operations. Skilled and knowledgeable in the safe and efficient operation of multiple types and sizes of transit vehicles, including diesel and electric power plants, body-on-chassis vehicles, and low-floor transit coaches of varying lengths. WORKING CONDITIONS: The employee may occasionally be required to lift and move up to 50 pounds. Specific vision abilities required by this job for safe maneuvering and operation of City buses and other vehicles. Ability to read traffic signs, observe passengers, and operate a vehicle during day and night-time conditions. The employee works near moving vehicles, machinery, & mechanical parts. Work is performed inside a bus and outdoor settings, in all weather conditions including extreme temperatures day and/or night. Periodic/considerable exposure to stressful situations including passenger questions, complaints, and general transit operations and City information inquiries. The noise level includes diesel engine noise, and passenger noise and is usually low to moderate. Non-traditional working hours which include evenings and weekends. Occasional on-call working hours including evenings and weekends. Work includes day, swing, and night shifts, holidays, and weekends. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required by personnel so classified. All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. PIb5-2746
Description: Position Summary: The Senior Maintenance Technician reports to the Facilities Manager and is responsible for performing routine building maintenance tasks and preventive maintenance in a timely and accurate manner. Performance of building maintenance tasks will include one or more fields (e.g., carpentry; electrical; heating, ventilation, and air conditioning (HVAC). Support the needs of the business and general work requirements as assigned. Follow all safety procedures and work in a fast-paced team environment. Position Responsibilities: Complete Facility Tree work orders including, but not limited to electrical, plumbing, HVAC, drywall, painting, and appliances. Electrical- perform routine electrical repairs such as: wiring, fuses, fixtures and sockets, and repair/install/service HVAC systems. Plumbing- perform routine plumbing repairs such as: replace/repair/service water heaters, clear drainlines, and replace broken pipes, worn out washers- gaskets and or faucets and floats. Carpentry- perform routine carpentry repair such as: kitchen cabinets, window screens/glass, door locks, and plaster/drywall, trim, flooring. Mechanical- perform routine mechanical repair such as: repair/diagnose all major appliances, HVAC, and other needed power tools. Other unskilled tasks such as: interior and exterior painting, floor tile installation and repair, interior cleaning, tree/shrub trimming, debris removal. Inventory- identifying, cataloging, and procuring necessary materials used in maintenance operation Perform preventative maintenance and general repairs of exterior and interior systems of Aspire buildings and residences. Responsible for after-hours emergency work orders in Aspire buildings and residences. Assist in snow/ice removal (where applicable) Basic troubleshooting and routine preventative maintenance Recognize when specialized knowledge is necessary and source appropriate resources. Assist other departments with moving furniture including unloading and storing supplies. Attend all mandatory employee staff meetings and company safety meetings/webinars. Understand and follow all safety protocols. Reporting to this Position: None Requirements: Required Education & Experience: High School Diploma or GED, required Three (3) to five (5) years of related experience and/or training; or equivalent combination of education and experience Additional Licensing/Certifications: Valid driver's license and GOOD driving record (MVR is reviewed) Required Skills, Knowledge & Abilities: Technical training or extensive hands-on experience required Ability to carry out other tasks, perform physical labor, operate tools and machinery, and lift at least 80 lbs. Microsoft Office (Word, Excel, and Outlook) proficiency Preferred Skills, Knowledge & Abilities: Forklift Certification (HVAC) Certification preferred Appliance repair experience Compensation details: 28-28.85 Hourly Wage PIa82d7b5-
09/03/2025
Full time
Description: Position Summary: The Senior Maintenance Technician reports to the Facilities Manager and is responsible for performing routine building maintenance tasks and preventive maintenance in a timely and accurate manner. Performance of building maintenance tasks will include one or more fields (e.g., carpentry; electrical; heating, ventilation, and air conditioning (HVAC). Support the needs of the business and general work requirements as assigned. Follow all safety procedures and work in a fast-paced team environment. Position Responsibilities: Complete Facility Tree work orders including, but not limited to electrical, plumbing, HVAC, drywall, painting, and appliances. Electrical- perform routine electrical repairs such as: wiring, fuses, fixtures and sockets, and repair/install/service HVAC systems. Plumbing- perform routine plumbing repairs such as: replace/repair/service water heaters, clear drainlines, and replace broken pipes, worn out washers- gaskets and or faucets and floats. Carpentry- perform routine carpentry repair such as: kitchen cabinets, window screens/glass, door locks, and plaster/drywall, trim, flooring. Mechanical- perform routine mechanical repair such as: repair/diagnose all major appliances, HVAC, and other needed power tools. Other unskilled tasks such as: interior and exterior painting, floor tile installation and repair, interior cleaning, tree/shrub trimming, debris removal. Inventory- identifying, cataloging, and procuring necessary materials used in maintenance operation Perform preventative maintenance and general repairs of exterior and interior systems of Aspire buildings and residences. Responsible for after-hours emergency work orders in Aspire buildings and residences. Assist in snow/ice removal (where applicable) Basic troubleshooting and routine preventative maintenance Recognize when specialized knowledge is necessary and source appropriate resources. Assist other departments with moving furniture including unloading and storing supplies. Attend all mandatory employee staff meetings and company safety meetings/webinars. Understand and follow all safety protocols. Reporting to this Position: None Requirements: Required Education & Experience: High School Diploma or GED, required Three (3) to five (5) years of related experience and/or training; or equivalent combination of education and experience Additional Licensing/Certifications: Valid driver's license and GOOD driving record (MVR is reviewed) Required Skills, Knowledge & Abilities: Technical training or extensive hands-on experience required Ability to carry out other tasks, perform physical labor, operate tools and machinery, and lift at least 80 lbs. Microsoft Office (Word, Excel, and Outlook) proficiency Preferred Skills, Knowledge & Abilities: Forklift Certification (HVAC) Certification preferred Appliance repair experience Compensation details: 28-28.85 Hourly Wage PIa82d7b5-
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Integrated Advanced Systems (IAS) team in Phantom Works is looking for a Senior Electronic Design Engineer to join our team to work on a variety of activities related to advanced mission systems in Berkeley, Missouri. As a Senior Electronic Design Engineer, you will be part of a team working on the development of a Software Defined Radio (SDR). You will have the opportunity to lead the embedded software development, implementation of Big Iron open architecture standards, and test of products as they move through their development lifecycle. There will also be tasks related to evaluation of effectiveness of varies mission systems technologies installed on a variety of platforms to assist with technology development and EW system evaluations along with the assisting with writing proposals for new business. Here in Phantom Works, our job is to transform technologies (both existing and new) into new and innovative products for our customers. Serve as the lead for the embedded software implementation on the team's SDR Effectively work on a diverse team that partners with customers both internal to Boeing as well as external. A willingness to learn. We're a team with lots of domain experts to learn from. You will also interact with engineers in multiple disciplines outside of electrical engineering. Apply general knowledge of electronic/electrical systems or subsystems and components including operating principles, design variables, performance, and key interfaces. Occasional travel may be required (10% of the time) Position Responsibilities: Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electricalelectronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 9+ years of work related experience with a Bachelor's OR 7+ years with a master's OR 3+ years with a PhD Experience programming in C/C++ Experience programming in Python Experience with Kubernetes or other containerization technologies Experience with message patters or transport technologies (ZMQ, Apache MQ, etc.) Experience with embedded systems development Preferred Qualifications Experience working with EW systems Experience working with RF hardware/subsystems Experience with Open Architectures, especially Big Iron Experience developing on Linux environments Typical Education & Experience 9+ years of work-related experience with a Bachelors degree OR 7+ years of work-related experience with a Masters OR 3+ years of work-related experience with a PhD In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $ 118,150 - $159,850 Applications for this position will be accepted until Sept. 09, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
09/02/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Integrated Advanced Systems (IAS) team in Phantom Works is looking for a Senior Electronic Design Engineer to join our team to work on a variety of activities related to advanced mission systems in Berkeley, Missouri. As a Senior Electronic Design Engineer, you will be part of a team working on the development of a Software Defined Radio (SDR). You will have the opportunity to lead the embedded software development, implementation of Big Iron open architecture standards, and test of products as they move through their development lifecycle. There will also be tasks related to evaluation of effectiveness of varies mission systems technologies installed on a variety of platforms to assist with technology development and EW system evaluations along with the assisting with writing proposals for new business. Here in Phantom Works, our job is to transform technologies (both existing and new) into new and innovative products for our customers. Serve as the lead for the embedded software implementation on the team's SDR Effectively work on a diverse team that partners with customers both internal to Boeing as well as external. A willingness to learn. We're a team with lots of domain experts to learn from. You will also interact with engineers in multiple disciplines outside of electrical engineering. Apply general knowledge of electronic/electrical systems or subsystems and components including operating principles, design variables, performance, and key interfaces. Occasional travel may be required (10% of the time) Position Responsibilities: Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electricalelectronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 9+ years of work related experience with a Bachelor's OR 7+ years with a master's OR 3+ years with a PhD Experience programming in C/C++ Experience programming in Python Experience with Kubernetes or other containerization technologies Experience with message patters or transport technologies (ZMQ, Apache MQ, etc.) Experience with embedded systems development Preferred Qualifications Experience working with EW systems Experience working with RF hardware/subsystems Experience with Open Architectures, especially Big Iron Experience developing on Linux environments Typical Education & Experience 9+ years of work-related experience with a Bachelors degree OR 7+ years of work-related experience with a Masters OR 3+ years of work-related experience with a PhD In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $ 118,150 - $159,850 Applications for this position will be accepted until Sept. 09, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Wake County Public School System
Cary, North Carolina
Overview: POSITION TITLE (Oracle title) SENIOR ADMINISTRATOR WORKING TITLE Senior Administrator-Lifecycle SCHOOL/DEPARTMENT Facilities Design and Construction/Lifecycle LOCATION Rock Quarry Road Office Complex, Raleigh, NC PAY GRADE Senior Administrator-Band 3 FLSA STATUS Exempt ELIGIBILITY FOR EMPLOYMENT CONTRACT No WORK WEEK SCHEDULE Monday-Friday (occasional evenings and weekends/May require emergency response availability) Position is available for a Hybrid Telework workweek POSITION PURPOSE: Represents the interests of Wake County Public School System (WCPSS) in the assessments of facilities and inventory of systems and materials to ensure compliance with the procedures and policies of the Board of Education. Coordinates with school administrators and other staff as required to assess facilities while minimizing disruption to school operations. Provides inventory of building systems and materials to Maximo team for use in maintenance of facilities, by skilled trades and regional maintenance. Uses available technology to effectively perform duties assigned. MINIMUM QUALIFICATIONS: KNOWLEDGE, SKILLS, AND ABILITIES (KSAs) Comprehensive knowledge of Microsoft Office, specifically Word, Excel, and PowerPoint; Google Apps. Knowledge of The Occupational Safety and Health Administration (OSHA) requirements; Critical thinking and problem solving skills; organizational skills; Ability to manage multiple tasks simultaneously; Ability to communicate clearly and concisely both in oral and written form using a variety of communication techniques and tools to ensure the appropriate flow of information, collaborative efforts, and feedback; Ability to be proactive and apply technical knowledge to improve deliverables, providing attention to detail to minimize errors; Ability to accurately read and interpret Construction Documents; Ability to accurately read, interpret, comprehend, and comply with WCPSS and departmental procedures; Ability to work well within a team environment that values an open exchange of ideas; Ability to interact positively and effectively with diverse group of stakeholders (e.g., WCPSS M&O and FD&C staff, design professionals, contractors, project managers, inspectors, principals, teachers, parents, other school system staff). EDUCATION, TRAINING, AND EXPERIENCE Bachelor's degree in a related field; (for example; Mechanical Engineering, Civil Engineering, Architectural Engineering, Architecture, Computer Science, Building Construction); AND Five years of directly related experience; OR An Associates degree in a related field: AND Ten years of directly related experience; OR A combination of education and relevant experience sufficient to successfully perform the essential duties of the job. CERTIFICATION AND LICENSE REQUIREMENTS Must hold and maintain a valid motor vehicle operator's license according to the State of NC requirements. Will need to travel to construction sites on a frequent and unscheduled basis. PREFERRED QUALIFICATIONS: Experience in General, HVAC, Electrical, Site or Life Safety Systems construction. ESSENTIAL DUTIES AND RESPONSIBILITIES: Prepares project budget, management plan, and contracts; participates in coordination of alternative locations for school staff and students during the pre-design phase. Participates in review of design documents for compliance with Design Guidelines and the review of construction cost estimates for adherence to project budget; obtains agency approvals as required during the design phase (e.g., Department of Insurance, Department of Public Instruction, local municipalities). Coordinates preparation of documentation for bid process; oversees bid review and prepares recommendations for Board approval. Reviews contractor schedule and regularly monitors progress; attends job site meetings and visits site as required during the construction phase. Monitors change order log and status reports; processes project pay applications and change orders for construction. Conducts ongoing quality control inspection of projects to ensure compliance with Design Guidelines, contract documents, codes and regulations. Maintains technical records and files in accordance with department procedures. Coordinates delivery of Owner-furnished items with appropriate personnel (e.g., Technology Services, Security, Child Nutrition Services, etc.); obtains Certificate of Occupancy and other agency approvals. Monitors completion of punch-list; obtains certificate letters and warranties from contractors and design consultants; obtains as-builts and final documents/ manuals during the closeout and warranty phase. Processes final pay applications from contractors and design consultants. Reconciles and closes out purchase orders in association with current projects. Schedules eleven-month warranty inspections and monitors completion of any warranty-related work. Performs other related duties as assigned. WORK ENVIRONMENT/PHYSICAL REQUIREMENTS This job operates in a professional office environment and has a noise level of mostly low to moderate. This role routinely uses standard office equipment such as computers, scanners, and copiers. The position, at times, must be able to come into direct contact with school system staff students, design professionals, contractors, and the general public. Work is considered light physical work, requiring the exertion of up to ten pounds of force. Position requires bending, stooping, lifting, carrying, standing, walking, climbing stairs and ladders. Must be able to physically access all elements of a construction site. Visits to schools and other sites are also required with possible exposure to extreme weather conditions, dust, pollen, insects and housekeeping chemicals. The work requires frequently driving of automotive equipment. EFFECTIVE DATE: 12/2023 DISCLAIMER: The above statements are intended to describe the general purpose and responsibilities assigned to this position. They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills required by the employees assigned to this position. This description may be revised by HR and approved at any time.
09/02/2025
Full time
Overview: POSITION TITLE (Oracle title) SENIOR ADMINISTRATOR WORKING TITLE Senior Administrator-Lifecycle SCHOOL/DEPARTMENT Facilities Design and Construction/Lifecycle LOCATION Rock Quarry Road Office Complex, Raleigh, NC PAY GRADE Senior Administrator-Band 3 FLSA STATUS Exempt ELIGIBILITY FOR EMPLOYMENT CONTRACT No WORK WEEK SCHEDULE Monday-Friday (occasional evenings and weekends/May require emergency response availability) Position is available for a Hybrid Telework workweek POSITION PURPOSE: Represents the interests of Wake County Public School System (WCPSS) in the assessments of facilities and inventory of systems and materials to ensure compliance with the procedures and policies of the Board of Education. Coordinates with school administrators and other staff as required to assess facilities while minimizing disruption to school operations. Provides inventory of building systems and materials to Maximo team for use in maintenance of facilities, by skilled trades and regional maintenance. Uses available technology to effectively perform duties assigned. MINIMUM QUALIFICATIONS: KNOWLEDGE, SKILLS, AND ABILITIES (KSAs) Comprehensive knowledge of Microsoft Office, specifically Word, Excel, and PowerPoint; Google Apps. Knowledge of The Occupational Safety and Health Administration (OSHA) requirements; Critical thinking and problem solving skills; organizational skills; Ability to manage multiple tasks simultaneously; Ability to communicate clearly and concisely both in oral and written form using a variety of communication techniques and tools to ensure the appropriate flow of information, collaborative efforts, and feedback; Ability to be proactive and apply technical knowledge to improve deliverables, providing attention to detail to minimize errors; Ability to accurately read and interpret Construction Documents; Ability to accurately read, interpret, comprehend, and comply with WCPSS and departmental procedures; Ability to work well within a team environment that values an open exchange of ideas; Ability to interact positively and effectively with diverse group of stakeholders (e.g., WCPSS M&O and FD&C staff, design professionals, contractors, project managers, inspectors, principals, teachers, parents, other school system staff). EDUCATION, TRAINING, AND EXPERIENCE Bachelor's degree in a related field; (for example; Mechanical Engineering, Civil Engineering, Architectural Engineering, Architecture, Computer Science, Building Construction); AND Five years of directly related experience; OR An Associates degree in a related field: AND Ten years of directly related experience; OR A combination of education and relevant experience sufficient to successfully perform the essential duties of the job. CERTIFICATION AND LICENSE REQUIREMENTS Must hold and maintain a valid motor vehicle operator's license according to the State of NC requirements. Will need to travel to construction sites on a frequent and unscheduled basis. PREFERRED QUALIFICATIONS: Experience in General, HVAC, Electrical, Site or Life Safety Systems construction. ESSENTIAL DUTIES AND RESPONSIBILITIES: Prepares project budget, management plan, and contracts; participates in coordination of alternative locations for school staff and students during the pre-design phase. Participates in review of design documents for compliance with Design Guidelines and the review of construction cost estimates for adherence to project budget; obtains agency approvals as required during the design phase (e.g., Department of Insurance, Department of Public Instruction, local municipalities). Coordinates preparation of documentation for bid process; oversees bid review and prepares recommendations for Board approval. Reviews contractor schedule and regularly monitors progress; attends job site meetings and visits site as required during the construction phase. Monitors change order log and status reports; processes project pay applications and change orders for construction. Conducts ongoing quality control inspection of projects to ensure compliance with Design Guidelines, contract documents, codes and regulations. Maintains technical records and files in accordance with department procedures. Coordinates delivery of Owner-furnished items with appropriate personnel (e.g., Technology Services, Security, Child Nutrition Services, etc.); obtains Certificate of Occupancy and other agency approvals. Monitors completion of punch-list; obtains certificate letters and warranties from contractors and design consultants; obtains as-builts and final documents/ manuals during the closeout and warranty phase. Processes final pay applications from contractors and design consultants. Reconciles and closes out purchase orders in association with current projects. Schedules eleven-month warranty inspections and monitors completion of any warranty-related work. Performs other related duties as assigned. WORK ENVIRONMENT/PHYSICAL REQUIREMENTS This job operates in a professional office environment and has a noise level of mostly low to moderate. This role routinely uses standard office equipment such as computers, scanners, and copiers. The position, at times, must be able to come into direct contact with school system staff students, design professionals, contractors, and the general public. Work is considered light physical work, requiring the exertion of up to ten pounds of force. Position requires bending, stooping, lifting, carrying, standing, walking, climbing stairs and ladders. Must be able to physically access all elements of a construction site. Visits to schools and other sites are also required with possible exposure to extreme weather conditions, dust, pollen, insects and housekeeping chemicals. The work requires frequently driving of automotive equipment. EFFECTIVE DATE: 12/2023 DISCLAIMER: The above statements are intended to describe the general purpose and responsibilities assigned to this position. They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills required by the employees assigned to this position. This description may be revised by HR and approved at any time.
Senior Mechanical Engineer - Facility Assessment Specialist US-NY-Albany Job ID: Type: Regular Full-Time # of Openings: 2 Category: MEP The LiRo Group Overview We have an immediate need for a Sr. Mechanical Engineer (focused on facility assessments) for our Albany project location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities In this role as Senior Mechanical Engineer , it will be focused on facility assessments for the New York State Office of General Services facility assessment program. The ideal candidate will have extensive experience evaluating facilities and preparing reports to support strategic decision-making and resource allocations. Additional responsibilities will include: Conduct comprehensive assessments of facilities for NYS OGS portfolio of buildings, adhering to established protocols and standards Collaborate with project stakeholders to define assessment criteria and objectives aligned with mission of LiRo-Hill and NYS OGS Utilize industry leading methodologies and tools to gather, analyze, and present assessment data effectively Develop detailed Improvement Plans that effectively prioritize facility upgrades and renovations based on assessment data and program priorities Engage with interdisciplinary teams to integrate assessment results into conceptual design for cost estimation and scheduling team members Provide technical expertise and guidance to support the program Qualifications Bachelor's Degree or Master's Degree in Mechanical Engineering Licenced PE with significant experience in facility assessments 10-15 years of industry experience Proven track record of managing assessments for public agencies or governmental organizations Familiarity with NYS OGS procedures a significant plus Strong knowledge of building systems and construction methodologies, with experience evaluating diverse facility types Excellent communication skills with the ability to convey technical information clearly to diverse audiences A detailed-oriented mindset committed to accuracy and precision in assessment methodologies and reporting Knowledge of Uniformat Group II classifications system a plus We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation Package Employee- Only Stock Purchase Plan Mentoring programs Continuing Education Program Employee referral bonus Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $100,000: $160,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates' qualifications and location. - The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. PI14ebfb77467b-4474
09/02/2025
Full time
Senior Mechanical Engineer - Facility Assessment Specialist US-NY-Albany Job ID: Type: Regular Full-Time # of Openings: 2 Category: MEP The LiRo Group Overview We have an immediate need for a Sr. Mechanical Engineer (focused on facility assessments) for our Albany project location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities In this role as Senior Mechanical Engineer , it will be focused on facility assessments for the New York State Office of General Services facility assessment program. The ideal candidate will have extensive experience evaluating facilities and preparing reports to support strategic decision-making and resource allocations. Additional responsibilities will include: Conduct comprehensive assessments of facilities for NYS OGS portfolio of buildings, adhering to established protocols and standards Collaborate with project stakeholders to define assessment criteria and objectives aligned with mission of LiRo-Hill and NYS OGS Utilize industry leading methodologies and tools to gather, analyze, and present assessment data effectively Develop detailed Improvement Plans that effectively prioritize facility upgrades and renovations based on assessment data and program priorities Engage with interdisciplinary teams to integrate assessment results into conceptual design for cost estimation and scheduling team members Provide technical expertise and guidance to support the program Qualifications Bachelor's Degree or Master's Degree in Mechanical Engineering Licenced PE with significant experience in facility assessments 10-15 years of industry experience Proven track record of managing assessments for public agencies or governmental organizations Familiarity with NYS OGS procedures a significant plus Strong knowledge of building systems and construction methodologies, with experience evaluating diverse facility types Excellent communication skills with the ability to convey technical information clearly to diverse audiences A detailed-oriented mindset committed to accuracy and precision in assessment methodologies and reporting Knowledge of Uniformat Group II classifications system a plus We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation Package Employee- Only Stock Purchase Plan Mentoring programs Continuing Education Program Employee referral bonus Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $100,000: $160,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates' qualifications and location. - The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. PI14ebfb77467b-4474
Semiconductor Field Service Technician III US-VA-Manassas Job ID: 32758 Type: Full-Time # of Openings: 1 Category: Field Service Additional Locations CUS About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in Manassas, VA to directly interface with customers to support their Anelva equipment in the field, which includes installations, preventive maintenance, troubleshooting, and repairs. The Semiconductor Field Service Technician III (Technician, Engineering III) performs technical support of high vacuum PVD equipment and related robotics. The individual must understand and have experience with vacuum technology, general practices, and procedures in the semiconductor industry and successfully perform field service duties in customer's clean room. Position provides on-site and on-call technical support, which may require off shift work. This position will require travel to Japan for the first 3-6 months for training. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time Troubleshoot hardware and software related issues and implement solutions Collect data for software related issues and discuss with headquarters in Japan Accurately document all maintenance activity and provide field service reports Install equipment control software and maintain record of software revision history Participate in the installation of equipment at customers' sites Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work Provide training and assistance to customer engineering team Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees, Escalate serious or complicated repair problems to senior level team members About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Associates degree or equivalent experience required, Bachelors degree in engineering preferred; plus 4-5 years of related experience including at least 2 years of experience working on vacuum equipment are preferred. Candidates without AS or BS may be considered with equivalent experience in the same field Multi chamber cluster systems and robotics experience are highly preferred Ability to understand electrical and mechanical drawings to troubleshoot problems. Experience with PLC and other software applications is a plus Ability to work independently following initial training and 3-6 months of on-the-job training Must have analytical skills for problem analysis and resolution Decide on problem solving road map and follow methodical means to resolution Decide and recommend spare and consumable parts for PM's and repairs Job will require international travel for training Domestic and international travel required (must have up-to-date travel documents). Valid driver's license and acceptable driving record necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies Position may require ability to work flexible shifts Requires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $33.37 - $49.98 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . Posting Tags PIb67b2c5-
09/01/2025
Full time
Semiconductor Field Service Technician III US-VA-Manassas Job ID: 32758 Type: Full-Time # of Openings: 1 Category: Field Service Additional Locations CUS About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in Manassas, VA to directly interface with customers to support their Anelva equipment in the field, which includes installations, preventive maintenance, troubleshooting, and repairs. The Semiconductor Field Service Technician III (Technician, Engineering III) performs technical support of high vacuum PVD equipment and related robotics. The individual must understand and have experience with vacuum technology, general practices, and procedures in the semiconductor industry and successfully perform field service duties in customer's clean room. Position provides on-site and on-call technical support, which may require off shift work. This position will require travel to Japan for the first 3-6 months for training. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time Troubleshoot hardware and software related issues and implement solutions Collect data for software related issues and discuss with headquarters in Japan Accurately document all maintenance activity and provide field service reports Install equipment control software and maintain record of software revision history Participate in the installation of equipment at customers' sites Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work Provide training and assistance to customer engineering team Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees, Escalate serious or complicated repair problems to senior level team members About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Associates degree or equivalent experience required, Bachelors degree in engineering preferred; plus 4-5 years of related experience including at least 2 years of experience working on vacuum equipment are preferred. Candidates without AS or BS may be considered with equivalent experience in the same field Multi chamber cluster systems and robotics experience are highly preferred Ability to understand electrical and mechanical drawings to troubleshoot problems. Experience with PLC and other software applications is a plus Ability to work independently following initial training and 3-6 months of on-the-job training Must have analytical skills for problem analysis and resolution Decide on problem solving road map and follow methodical means to resolution Decide and recommend spare and consumable parts for PM's and repairs Job will require international travel for training Domestic and international travel required (must have up-to-date travel documents). Valid driver's license and acceptable driving record necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies Position may require ability to work flexible shifts Requires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $33.37 - $49.98 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . Posting Tags PIb67b2c5-
Job Description: We are seeking a strategic and experienced Director of Functional Engineering to lead our multi-disciplinary engineering organization, including mechanical, electrical, systems, integration, and test engineering. This leadership role is responsible for organizational planning, resource alignment, and execution of engineering efforts in support of business and program objectives. The Director will work in close partnership with the Director of Technology to ensure alignment between current program execution and the long-term engineering roadmap. This position will be based at our planned location in the Detroit, Michigan area and is eligible for Saab Inc.'s relocation package. Key Responsibilities: Oversee the engineering organization, leading a multi-disciplinary team across mechanical, electrical, systems, integration, and test disciplines Drive organizational planning and execution including staffing, budgeting, and resource alignment to meet current and future program needs Partner with senior leadership to define and implement strategic engineering and programmatic objectives aligned with business goals Translate segment-level business strategy into actionable engineering plans and ensure consistent execution across all engineering functions Foster a high-performing culture of accountability, innovation, and collaboration across all engineering teams Ensure functional alignment and readiness to support multiple programs, customers, and product development efforts Champion the development of engineering talent, organizational capability, and knowledge-sharing across disciplines Provide input and partnership to the Director of Technology/Chief Engineering office in the development and continuous improvement of engineering processes, methods, and best practices to enhance functional performance Compensation Range: $184,400-248,900 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Qualifications: Bachelor's degree in engineering or a related technical field required; advanced degree preferred Aerospace and defense experience strongly preferred, with 15+ years of engineering experience DoD weapon system development, production and fielding, including systems, software, mechanical, or electrical experience, including 5+ years in engineering leadership roles managing multi-disciplinary teams Proven ability to lead complex engineering functions in a matrixed or dynamic environment Strong understanding of the product development lifecycle, systems engineering principles, and functional execution in regulated industries Demonstrated experience aligning engineering strategy and execution with broader business and programmatic goals Excellent leadership, communication, and cross-functional collaboration skills with strong competency in communicating to executive level stakeholders Must be willing to travel up to 25% Must have or be capable of obtaining a Secret level clearance Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: Medical, vision and dental insurance for employees and dependents Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability 401(k) with immediate vesting on employer match Tuition assistance Student loan assistance Wellness account, subscription and employee assistance programs Employee stock purchase program with employer match About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.
09/01/2025
Full time
Job Description: We are seeking a strategic and experienced Director of Functional Engineering to lead our multi-disciplinary engineering organization, including mechanical, electrical, systems, integration, and test engineering. This leadership role is responsible for organizational planning, resource alignment, and execution of engineering efforts in support of business and program objectives. The Director will work in close partnership with the Director of Technology to ensure alignment between current program execution and the long-term engineering roadmap. This position will be based at our planned location in the Detroit, Michigan area and is eligible for Saab Inc.'s relocation package. Key Responsibilities: Oversee the engineering organization, leading a multi-disciplinary team across mechanical, electrical, systems, integration, and test disciplines Drive organizational planning and execution including staffing, budgeting, and resource alignment to meet current and future program needs Partner with senior leadership to define and implement strategic engineering and programmatic objectives aligned with business goals Translate segment-level business strategy into actionable engineering plans and ensure consistent execution across all engineering functions Foster a high-performing culture of accountability, innovation, and collaboration across all engineering teams Ensure functional alignment and readiness to support multiple programs, customers, and product development efforts Champion the development of engineering talent, organizational capability, and knowledge-sharing across disciplines Provide input and partnership to the Director of Technology/Chief Engineering office in the development and continuous improvement of engineering processes, methods, and best practices to enhance functional performance Compensation Range: $184,400-248,900 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Qualifications: Bachelor's degree in engineering or a related technical field required; advanced degree preferred Aerospace and defense experience strongly preferred, with 15+ years of engineering experience DoD weapon system development, production and fielding, including systems, software, mechanical, or electrical experience, including 5+ years in engineering leadership roles managing multi-disciplinary teams Proven ability to lead complex engineering functions in a matrixed or dynamic environment Strong understanding of the product development lifecycle, systems engineering principles, and functional execution in regulated industries Demonstrated experience aligning engineering strategy and execution with broader business and programmatic goals Excellent leadership, communication, and cross-functional collaboration skills with strong competency in communicating to executive level stakeholders Must be willing to travel up to 25% Must have or be capable of obtaining a Secret level clearance Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: Medical, vision and dental insurance for employees and dependents Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability 401(k) with immediate vesting on employer match Tuition assistance Student loan assistance Wellness account, subscription and employee assistance programs Employee stock purchase program with employer match About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.
Technician, Engineering II (Field Service Engineer II) US-CA-San Jose Job ID: 33523 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations. This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time. Troubleshoot hardware and software related issues and implement solutions Collect data for software related issues and discuss with headquarter in Japan. Accurately document all maintenance activity and provide field service reports. Install equipment control software and maintain record of software revision history. Participate in the installation of equipment at customers' sites. Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work. Provide training and assistance to other technicians. Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees, Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring 2-3 years of experience with PVD or semiconductor vacuum equipment with AS degree is required, Bachelor's degree in engineering is preferred. Candidates without AS or BS may be considered with equivalent experience in the same field Multi chamber cluster systems and robotics experience is highly preferred Ability to understand electrical and mechanical drawings for troubleshooting Experience with PLC and other software applications is a plus Ability to work independently following 3-6 months of on the job training Must have analytical skills for problem analysis and resolution Decide on problem solving road map and follow methodical means to resolution Decide and recommend spare and consumable parts for PM's and repairs Job may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies Position may require ability to work flexible shifts Requires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $29.20 - $43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI027a6cf9ce6e-1192
09/01/2025
Full time
Technician, Engineering II (Field Service Engineer II) US-CA-San Jose Job ID: 33523 Type: Full-Time # of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in San Jose, CA to directly interface with customers to support their Anelva equipment in the field, which includes troubleshooting and installations. This position performs technical support of the high vacuum equipment for PVD and related robotics. The individual must understand vacuum technology, general practices, and procedures within the semiconductor field and be able to apply such skills fluently to perform field service duties at customer's clean room. In addition, provide on-call technical support, which may require off shift work. This position requires full-time presence at your assigned office(s)/worksite(s). Your Impact Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time. Troubleshoot hardware and software related issues and implement solutions Collect data for software related issues and discuss with headquarter in Japan. Accurately document all maintenance activity and provide field service reports. Install equipment control software and maintain record of software revision history. Participate in the installation of equipment at customers' sites. Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work. Provide training and assistance to other technicians. Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees, Escalate serious or complicated repair problems to senior level team members. About You: The Skills & Expertise You Bring 2-3 years of experience with PVD or semiconductor vacuum equipment with AS degree is required, Bachelor's degree in engineering is preferred. Candidates without AS or BS may be considered with equivalent experience in the same field Multi chamber cluster systems and robotics experience is highly preferred Ability to understand electrical and mechanical drawings for troubleshooting Experience with PLC and other software applications is a plus Ability to work independently following 3-6 months of on the job training Must have analytical skills for problem analysis and resolution Decide on problem solving road map and follow methodical means to resolution Decide and recommend spare and consumable parts for PM's and repairs Job may require domestic travel up to 25% and international travel for training. May require considerable travel throughout sales territory (valid driver's license and acceptable driving record necessary). Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies Position may require ability to work flexible shifts Requires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $29.20 - $43.73 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PI027a6cf9ce6e-1192
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At The Boeing Company, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for Mid Level Software Engineers - Simulation to join the F-22 Pilot Training Vehicle Simulation Software team located in Berkeley, Missouri. This position will focus on supporting the Boeing Global Services (BGS) Software Engineering organization. The F-22 Vehicle Simulation Team within BGS Software Engineering is responsible for developing products directly employed in the training of our nation's fighter pilots: • F-22 Pilot Training Avionics Simulation (PTAS) • F-22 Advanced Simulation Toolset (FAST) supporting the Boeing Virtual Warfare Center (VWC) These simulations support the employment and training of next generation avionics and sensor systems for the F-22 Raptor. This is an exciting opportunity that will allow you to support the long-term roadmap of the Vehicle Simulation team as a Senior Software Engineer. In this role you will interact with users to clarify requirements and timelines; help software development teams meet management/stakeholders prioritization of feature enhancements; participate in technical design and peer code reviews; enforce coding standards; provide mentoring to junior engineers; and function as a primary software developer. F-22 Vehicle Simulation Software Engineers test their changes daily in several different simulation environments including the desktop-based Development Test Environment (DTE) and Full Mission Trainer (FMT) cockpit used in conjunction with the Constant Resolution Visual System (CRVS) driving 360 degrees of immersive, visual environment. Position Responsibilities: Leads the design, architecture, and development of simulation models, virtual environments/platforms and frameworks to enhance test performance, and durability of software systems throughout the entire product lifecycle. Partners with stakeholders to lead the review and identification of simulation requirements and dynamics of the systems being simulated. Performs data collection and processing for use in simulations. Leads validation, verification, and refinement of simulation software code, models, simulations, test procedures and test environments, and modeling against real-world data, test data, benchmarks, or other similar models. Leads the documentation and maintenance of technical code, algorithms, specifications and descriptions of simulation models. Partners with cross functional engineering teams to integrate simulation software with hardware devices and systems. Leads implementing current and emerging technologies, tools, frameworks, and methods in the software engineering simulation environment. Leads modernizing, migrating, sustaining, and updating simulation software to adapt legacy systems to new operating systems. Leads simulation software project management functions. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): 5 years of experience developing in C/C++ for real time embedded systems 5 years of experience with Windows OS and Linux/Red Hat OS 5 years of experience in using Software Development tools such as Git, Bitbucket, MS Visual Studio Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Experience with VersionOne/Agility, GNAT Pro, GLStudio Experience developing in Ada, Fortran, OpenGL, Python, and Qt. Experience with incorporating Lean methodologies and Agile planning and scheduling processes. Knowledge of cloud architecture, including the different types of clouds (public, private, and hybrid), the different cloud platforms and the various components involved (computing, storage, and networking). Ability to automate and script skills. Knowledge of containerization technologies which includes understanding how to manage containers, deploy applications in a containerized environment, and troubleshoot issues. Knowledge of understanding of networking concepts, including IP addressing, subnetting, routing, and security (focus on security best practices and technologies). Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle. Knowledge and ability to design, develop, integrate, apply, and test software models, simulations, framework environments, tools, and applications with higher order programming languages, assembly, and auto-code. Ability to perform Application Programming Interface (API) design, implementation, and testing. Knowledge of real-time software architecture and design methodologies to synthesize models and simulation frameworks that meet real-time requirements; this includes knowledge of real-time target environments, its processor and network architecture, communication protocols, and electrical interfaces. Knowledge of software architecture and design methodologies. Ability to synthesize software architectures and designs that meet requirements, characteristics and constraints. Knowledge of build and execution environments that include hosts, processors, operating systems, and networks. Ability to build, integrate, test, and troubleshoot software components comprising simulation models and build/execution frameworks. Knowledge of verification, validation, certification, and qualification processes. Ability to design and develop software testing processes for different units, modules or components of a software application as a combined and integrated entity. It includes deep knowledge of integration-testing tools. Knowledge of aircraft systems, including weapons, night vision system, mechanics, hydraulics, electronics, flight controls, etc. Travel: 10% Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $110,500.00 - $149,500.00 Applications for this position will be accepted until Sept. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
09/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At The Boeing Company, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for Mid Level Software Engineers - Simulation to join the F-22 Pilot Training Vehicle Simulation Software team located in Berkeley, Missouri. This position will focus on supporting the Boeing Global Services (BGS) Software Engineering organization. The F-22 Vehicle Simulation Team within BGS Software Engineering is responsible for developing products directly employed in the training of our nation's fighter pilots: • F-22 Pilot Training Avionics Simulation (PTAS) • F-22 Advanced Simulation Toolset (FAST) supporting the Boeing Virtual Warfare Center (VWC) These simulations support the employment and training of next generation avionics and sensor systems for the F-22 Raptor. This is an exciting opportunity that will allow you to support the long-term roadmap of the Vehicle Simulation team as a Senior Software Engineer. In this role you will interact with users to clarify requirements and timelines; help software development teams meet management/stakeholders prioritization of feature enhancements; participate in technical design and peer code reviews; enforce coding standards; provide mentoring to junior engineers; and function as a primary software developer. F-22 Vehicle Simulation Software Engineers test their changes daily in several different simulation environments including the desktop-based Development Test Environment (DTE) and Full Mission Trainer (FMT) cockpit used in conjunction with the Constant Resolution Visual System (CRVS) driving 360 degrees of immersive, visual environment. Position Responsibilities: Leads the design, architecture, and development of simulation models, virtual environments/platforms and frameworks to enhance test performance, and durability of software systems throughout the entire product lifecycle. Partners with stakeholders to lead the review and identification of simulation requirements and dynamics of the systems being simulated. Performs data collection and processing for use in simulations. Leads validation, verification, and refinement of simulation software code, models, simulations, test procedures and test environments, and modeling against real-world data, test data, benchmarks, or other similar models. Leads the documentation and maintenance of technical code, algorithms, specifications and descriptions of simulation models. Partners with cross functional engineering teams to integrate simulation software with hardware devices and systems. Leads implementing current and emerging technologies, tools, frameworks, and methods in the software engineering simulation environment. Leads modernizing, migrating, sustaining, and updating simulation software to adapt legacy systems to new operating systems. Leads simulation software project management functions. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): 5 years of experience developing in C/C++ for real time embedded systems 5 years of experience with Windows OS and Linux/Red Hat OS 5 years of experience in using Software Development tools such as Git, Bitbucket, MS Visual Studio Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Experience with VersionOne/Agility, GNAT Pro, GLStudio Experience developing in Ada, Fortran, OpenGL, Python, and Qt. Experience with incorporating Lean methodologies and Agile planning and scheduling processes. Knowledge of cloud architecture, including the different types of clouds (public, private, and hybrid), the different cloud platforms and the various components involved (computing, storage, and networking). Ability to automate and script skills. Knowledge of containerization technologies which includes understanding how to manage containers, deploy applications in a containerized environment, and troubleshoot issues. Knowledge of understanding of networking concepts, including IP addressing, subnetting, routing, and security (focus on security best practices and technologies). Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle. Knowledge and ability to design, develop, integrate, apply, and test software models, simulations, framework environments, tools, and applications with higher order programming languages, assembly, and auto-code. Ability to perform Application Programming Interface (API) design, implementation, and testing. Knowledge of real-time software architecture and design methodologies to synthesize models and simulation frameworks that meet real-time requirements; this includes knowledge of real-time target environments, its processor and network architecture, communication protocols, and electrical interfaces. Knowledge of software architecture and design methodologies. Ability to synthesize software architectures and designs that meet requirements, characteristics and constraints. Knowledge of build and execution environments that include hosts, processors, operating systems, and networks. Ability to build, integrate, test, and troubleshoot software components comprising simulation models and build/execution frameworks. Knowledge of verification, validation, certification, and qualification processes. Ability to design and develop software testing processes for different units, modules or components of a software application as a combined and integrated entity. It includes deep knowledge of integration-testing tools. Knowledge of aircraft systems, including weapons, night vision system, mechanics, hydraulics, electronics, flight controls, etc. Travel: 10% Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $110,500.00 - $149,500.00 Applications for this position will be accepted until Sept. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Careers With Purpose Join our not-for-profit organization that has provided over 100 years of housing and services to seniors with a commitment to quality care and service in a Christian environment. Facility: GSS MN Waconia Ctr Location: Waconia, MN Address: 333 W 5th St, Waconia, MN 55387, USA Shift: Day Job Schedule: Full time Weekly Hours: 40.00 Salary Range: $17.50 - $28.00 Pay Info: $5000 Sign On Bonus! Department Details $5,000 Sign on Bonus Available Come join a rewarding and humbling team environment that not only cares about the people who live here but also those that work here. We are hiring a Full Time Maintenance position - Monday - Friay with a weekend on call rotation. Boiler's License Required (special license)- low pressure Competitive Compensation Direct access to your earnings daily Fun, Family Oriented Work Environment Excellent Health, Dental and Vision Insurance Generous Shift Differentials Health Savings Account Company Matched 401(k) Retirement Plan Salary Increases Referral Bonuses Advancement Opportunities Paid Time Off Compassionate Leave Education Assistance Scholarships and Sponsorships Continuing Education Competitive Compensation Direct access to your earnings daily Fun, Family Oriented Work Environment Excellent Health, Dental and Vision Insurance Generous Shift Differentials Health Savings Account Company Matched 401(k) Retirement Plan Salary Increases Referral Bonuses Advancement Opportunities Paid Time Off Compassionate Leave Education Assistance Scholarships and Sponsorships Continuing Education Job Summary Responsible for light maintenance repair and cleaning tasks completed in a safe, professional manner. Must take extra precautions when working in patient/resident care areas and specifically keep tools out of the reach of children. Must possess basic mechanical knowledge and show competence in the use of hand tools, meters, measuring devices and gauges. Ability to work from blueprints, schematics and technical manuals helpful. Must be able to explain conditions and situations accurately while troubleshooting, and function with safety, moral end efficiency of the department in mind. Ability to work all shifts and hours as scheduled. Must comply with all corporate and facility policies and dress code. Must understand written and verbal communications. Good written and oral communications skills required. Works independently with minimal supervision. Must have knowledge of federal, state, and local codes, specifications, and ordinances. Depending on facility size, additional duties may include but are not limited to: perform installation and maintenance of mechanical and stationary systems, including boiler operations, to ensure a safe and efficient environment; maintain campus grounds and perform other outside maintenance duties; perform general duties such as electrical, plumbing, carpentry, painting, HVAC, and bed repair and maintenance. May require on-call duties as needed or as directed by the department. Qualifications High school diploma or equivalent preferred. Trade school or vocational school preferred. Minimum of two years experience in building systems preferred. Depending on location, a valid driver's license and a good driving record may be required. Benefits The Good Samaritan offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit . The Good Samaritan is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1- or send an email to . The Good Samaritan has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R- Job Function: Facilities and General Services Featured: No
09/01/2025
Full time
Careers With Purpose Join our not-for-profit organization that has provided over 100 years of housing and services to seniors with a commitment to quality care and service in a Christian environment. Facility: GSS MN Waconia Ctr Location: Waconia, MN Address: 333 W 5th St, Waconia, MN 55387, USA Shift: Day Job Schedule: Full time Weekly Hours: 40.00 Salary Range: $17.50 - $28.00 Pay Info: $5000 Sign On Bonus! Department Details $5,000 Sign on Bonus Available Come join a rewarding and humbling team environment that not only cares about the people who live here but also those that work here. We are hiring a Full Time Maintenance position - Monday - Friay with a weekend on call rotation. Boiler's License Required (special license)- low pressure Competitive Compensation Direct access to your earnings daily Fun, Family Oriented Work Environment Excellent Health, Dental and Vision Insurance Generous Shift Differentials Health Savings Account Company Matched 401(k) Retirement Plan Salary Increases Referral Bonuses Advancement Opportunities Paid Time Off Compassionate Leave Education Assistance Scholarships and Sponsorships Continuing Education Competitive Compensation Direct access to your earnings daily Fun, Family Oriented Work Environment Excellent Health, Dental and Vision Insurance Generous Shift Differentials Health Savings Account Company Matched 401(k) Retirement Plan Salary Increases Referral Bonuses Advancement Opportunities Paid Time Off Compassionate Leave Education Assistance Scholarships and Sponsorships Continuing Education Job Summary Responsible for light maintenance repair and cleaning tasks completed in a safe, professional manner. Must take extra precautions when working in patient/resident care areas and specifically keep tools out of the reach of children. Must possess basic mechanical knowledge and show competence in the use of hand tools, meters, measuring devices and gauges. Ability to work from blueprints, schematics and technical manuals helpful. Must be able to explain conditions and situations accurately while troubleshooting, and function with safety, moral end efficiency of the department in mind. Ability to work all shifts and hours as scheduled. Must comply with all corporate and facility policies and dress code. Must understand written and verbal communications. Good written and oral communications skills required. Works independently with minimal supervision. Must have knowledge of federal, state, and local codes, specifications, and ordinances. Depending on facility size, additional duties may include but are not limited to: perform installation and maintenance of mechanical and stationary systems, including boiler operations, to ensure a safe and efficient environment; maintain campus grounds and perform other outside maintenance duties; perform general duties such as electrical, plumbing, carpentry, painting, HVAC, and bed repair and maintenance. May require on-call duties as needed or as directed by the department. Qualifications High school diploma or equivalent preferred. Trade school or vocational school preferred. Minimum of two years experience in building systems preferred. Depending on location, a valid driver's license and a good driving record may be required. Benefits The Good Samaritan offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit . The Good Samaritan is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1- or send an email to . The Good Samaritan has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R- Job Function: Facilities and General Services Featured: No
B. Braun Medical, Inc. Company: B. BRAUN MEDICAL (US) INC Job Posting Location: Allentown, Pennsylvania, United States Functional Area: Other Areas Working Model: Onsite Days of Work: Wednesday, Thursday, Tuesday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 5152 B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS . Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit Position Summary: Ensure that proven Reliability Engineering methods and techniques are used across the B. Braun US and Dominican Republic manufacturing plants to maximize system availability, throughput, safety, quality and environmental performance. The role of the Senior Reliability Engineer is to identify and mitigate risks that could adversely affect plant or business operations. The Senior Reliability Engineer provides leadership and technical expertise in support of the B. Braun asset management strategy, asset reliability excellence, performance reliability excellence and world class maintenance associated practices, to ensure maximum equipment reliability at minimum life cycle cost. This self-driven, self-motivated individual works equally well independently or as a part of a team. The Senior Reliability Engineer must be capable of: analyzing conditions, performing technical troubleshooting, and identifying the root cause(s). communicating and building census for solutions to issues with each sites RE. evaluating asset/equipment conditions using invasive and non-invasive practices/technologies to monitor equipment for early signs of deteriorating condition; allowing for early prediction and failure analysis. The Senior Reliability Engineer coordinates/ assists in training and mentoring of mechanics in electrical, mechanical, hydraulic, and pneumatic maintenance and repair of assets. The Senior Reliability Engineer oversees mitigation and intervention of identified issues to ensure that the temporary/permanent resolution is planned, scheduled, and implemented. The Senior Reliability Engineer fosters effective working relationships built upon trust and respect across all levels of the organization. Proficient computer skills including: MS Office Outlook, Word, Excel, and PowerPoint Availability Simulation and Modeling Software Statistical Analysis Software Familiarity with Lean/Six Sigma methods and processes Certified Maintenance and Reliability Professional (CMRP) Certified Reliability Leader (CRL) Level 1 Certification in one or more proactive technologies like Ultrasound, Oil Analysis, Thermography or Vibration Analysis Responsibilities: Essential Duties Provides technical oversight and management for the development of the facility's equipment hierarchy Facilitates and manages Asset Health Matrix for all process lines and critical assets Facilitates and manages the development and maintenance of the Asset Criticality Database Facilitates the development of failure modes driven Equipment Maintenance Plans (EMPs) Uses statistical methods to analyze asset failure data to determine the need for adjustments in: MRO inventory Planned maintenance task and/or frequencies Equipment design Uses statistical methods and reliability modeling to determine optimized equipment maintenance strategies based on: Cost of process downtime Cost of direct maintenance EHS impact Provides technical oversight for the development and management of condition based monitoring activities (Remote Sensors, Ultrasound, Thermography, Vibration Analysis, Oil Analysis and others) Provides technical oversight and management of the facility's Failure Reporting, Analysis, and Corrective Action System (FRACAS) Applies reliability analysis methods to new designs to determine system, asset and component reliability to ensure that new equipment meets performance expectations. Provides leadership and technical expertise in support of the B. Braun asset management strategy, asset reliability excellence, performance reliability excellence and world class maintenance associated practices, to ensure maximum equipment reliability at minimum life cycle cost. Ensure Reliability Engineering methods and techniques are used across the B. Braun US and Dominican Republic manufacturing plants to maximize system availability, throughput, safety, quality and environmental performance. Identify and mitigate risks that could adversely affect plant or business operations. Analyze conditions, perform technical troubleshooting, and identify root cause(s). Communicate and build census for solutions to issues with each sites Reliability Engineer Evaluate asset/equipment conditions using invasive and non-invasive practices/technologies to monitor equipment for early signs of deteriorating condition, allowing for early prediction and failure analysis. Coordinates/ assists in training and mentoring of mechanics in electrical, mechanical, hydraulic, and pneumatic maintenance and repair of assets. Oversees mitigation and intervention of identified issues to ensure that the temporary/permanent resolution is planned, scheduled, and implemented. The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. General: It shall be the duty of every employee while at work to take reasonable care for safety and health of himself/herself and other person. Expertise: Knowledge & Skills Requires advanced knowledge of professional field and industry. Influences the development of and drives the application of principles, theories, concepts. Determines best course of action. Advanced understanding of proactive (predictive) and preventive maintenance processes Demonstrated knowledge of TPM Total Productive Maintenance, Reliability and Maintenance tools and techniques including Focused Improvement and Autonomous Maintenance Demonstrated Leadership Skills Strong written, verbal, communication, and presentation skills Expertise: Qualifications -Education/Experience/Training/Etc Required: Bachelor's degree required. 03-05 years related experience ORTechnical requirements completed and pass assessment at appropriate level. Applicable industry/professional certification preferred. Frequent business travel required, Ability to work non-standard schedule as needed Attendance Requirement Regular and predictable attendance Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is expected to: Light work - Exerting up to 20 lbs of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Lifting, Carrying, Pushing, Pulling and Reaching: Occasionally: Reaching upward and downward, Push/pull, Stand Frequently: Sit Activities: Environmental Conditions: Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally: Reaching upward and downward, Push/pull, Stand Target Based Range: $98,483 - $123,096 The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Compensation decisions are dependent on the facts and circumstances of each case. The range provided is a reasonable estimate. B. Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement. To learn more about B . click apply for full job details
09/01/2025
Full time
B. Braun Medical, Inc. Company: B. BRAUN MEDICAL (US) INC Job Posting Location: Allentown, Pennsylvania, United States Functional Area: Other Areas Working Model: Onsite Days of Work: Wednesday, Thursday, Tuesday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 5152 B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS . Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit Position Summary: Ensure that proven Reliability Engineering methods and techniques are used across the B. Braun US and Dominican Republic manufacturing plants to maximize system availability, throughput, safety, quality and environmental performance. The role of the Senior Reliability Engineer is to identify and mitigate risks that could adversely affect plant or business operations. The Senior Reliability Engineer provides leadership and technical expertise in support of the B. Braun asset management strategy, asset reliability excellence, performance reliability excellence and world class maintenance associated practices, to ensure maximum equipment reliability at minimum life cycle cost. This self-driven, self-motivated individual works equally well independently or as a part of a team. The Senior Reliability Engineer must be capable of: analyzing conditions, performing technical troubleshooting, and identifying the root cause(s). communicating and building census for solutions to issues with each sites RE. evaluating asset/equipment conditions using invasive and non-invasive practices/technologies to monitor equipment for early signs of deteriorating condition; allowing for early prediction and failure analysis. The Senior Reliability Engineer coordinates/ assists in training and mentoring of mechanics in electrical, mechanical, hydraulic, and pneumatic maintenance and repair of assets. The Senior Reliability Engineer oversees mitigation and intervention of identified issues to ensure that the temporary/permanent resolution is planned, scheduled, and implemented. The Senior Reliability Engineer fosters effective working relationships built upon trust and respect across all levels of the organization. Proficient computer skills including: MS Office Outlook, Word, Excel, and PowerPoint Availability Simulation and Modeling Software Statistical Analysis Software Familiarity with Lean/Six Sigma methods and processes Certified Maintenance and Reliability Professional (CMRP) Certified Reliability Leader (CRL) Level 1 Certification in one or more proactive technologies like Ultrasound, Oil Analysis, Thermography or Vibration Analysis Responsibilities: Essential Duties Provides technical oversight and management for the development of the facility's equipment hierarchy Facilitates and manages Asset Health Matrix for all process lines and critical assets Facilitates and manages the development and maintenance of the Asset Criticality Database Facilitates the development of failure modes driven Equipment Maintenance Plans (EMPs) Uses statistical methods to analyze asset failure data to determine the need for adjustments in: MRO inventory Planned maintenance task and/or frequencies Equipment design Uses statistical methods and reliability modeling to determine optimized equipment maintenance strategies based on: Cost of process downtime Cost of direct maintenance EHS impact Provides technical oversight for the development and management of condition based monitoring activities (Remote Sensors, Ultrasound, Thermography, Vibration Analysis, Oil Analysis and others) Provides technical oversight and management of the facility's Failure Reporting, Analysis, and Corrective Action System (FRACAS) Applies reliability analysis methods to new designs to determine system, asset and component reliability to ensure that new equipment meets performance expectations. Provides leadership and technical expertise in support of the B. Braun asset management strategy, asset reliability excellence, performance reliability excellence and world class maintenance associated practices, to ensure maximum equipment reliability at minimum life cycle cost. Ensure Reliability Engineering methods and techniques are used across the B. Braun US and Dominican Republic manufacturing plants to maximize system availability, throughput, safety, quality and environmental performance. Identify and mitigate risks that could adversely affect plant or business operations. Analyze conditions, perform technical troubleshooting, and identify root cause(s). Communicate and build census for solutions to issues with each sites Reliability Engineer Evaluate asset/equipment conditions using invasive and non-invasive practices/technologies to monitor equipment for early signs of deteriorating condition, allowing for early prediction and failure analysis. Coordinates/ assists in training and mentoring of mechanics in electrical, mechanical, hydraulic, and pneumatic maintenance and repair of assets. Oversees mitigation and intervention of identified issues to ensure that the temporary/permanent resolution is planned, scheduled, and implemented. The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. General: It shall be the duty of every employee while at work to take reasonable care for safety and health of himself/herself and other person. Expertise: Knowledge & Skills Requires advanced knowledge of professional field and industry. Influences the development of and drives the application of principles, theories, concepts. Determines best course of action. Advanced understanding of proactive (predictive) and preventive maintenance processes Demonstrated knowledge of TPM Total Productive Maintenance, Reliability and Maintenance tools and techniques including Focused Improvement and Autonomous Maintenance Demonstrated Leadership Skills Strong written, verbal, communication, and presentation skills Expertise: Qualifications -Education/Experience/Training/Etc Required: Bachelor's degree required. 03-05 years related experience ORTechnical requirements completed and pass assessment at appropriate level. Applicable industry/professional certification preferred. Frequent business travel required, Ability to work non-standard schedule as needed Attendance Requirement Regular and predictable attendance Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is expected to: Light work - Exerting up to 20 lbs of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Lifting, Carrying, Pushing, Pulling and Reaching: Occasionally: Reaching upward and downward, Push/pull, Stand Frequently: Sit Activities: Environmental Conditions: Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally: Reaching upward and downward, Push/pull, Stand Target Based Range: $98,483 - $123,096 The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Compensation decisions are dependent on the facts and circumstances of each case. The range provided is a reasonable estimate. B. Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement. To learn more about B . click apply for full job details
Job Purpose: Join our dynamic team as the Director of Programs, where you will be responsible for leading a team of Program Managers, overseeing project management standards and ensuring alignment with organization goals. In this role, you manage programs and collaborate with diverse teams to ensure program excellence and impact. This is an exciting opportunity to influence strategic direction and make a tangible difference within our organization and the customers we serve. Duties: - Oversee the planning, implementation, and evaluation of all program activities to ensure alignment with LEI-Laser solutions business unit and LEI Corporate objectives and goals. - Lead a team of program managers, providing guidance, mentorship, and performance evaluations. - Oversee the development of and manage program budgets, including forecasting and reporting to ensure financial sustainability and stakeholder awareness. - Establish and maintain relationships with stakeholders, including LEI-Laser solutions business unit senior management and LEI Corporate Leadership as well as customers and subcontractors. - Analyze program data and metrics to assess impact and drive continuous improvement. - Ensure compliance with relevant regulations, standards, and best practices in program startup, execution and closure. - Collaborate with cross-functional teams to integrate program initiatives with overall organizational strategy. - Prepare and present regular updates and reports to LEI-Laser solutions business unit senior management and LEI Corporate leadership. - Develop and implement strategic plans to expand and enhance program offerings. - Lead the development of program policies, procedures, and protocols per LEI Corporate directives. - Coordinate and facilitate program-related meetings, workshops, and events. - Foster a culture of innovation and excellence within program teams. - Handle escalated issues and resolve complex problems related to program delivery. - Plan and manage programs from initial startup through closeout - Work with the Business Development team to prepare and review proposals Skills/Qualifications: - Bachelors degree in Physics, Electrical or Mechanical Engineering or a related technical field; Masters preferred - Minimum of 10 years of experience in program management - Familiarity with Earned Value Management and DoD Contracts including CPFF, FFP, and OTA type contracts - Proficiency in understanding and tracking program health metrics, including but not limited to, Budget, Plan, Actuals, Estimate to Complete, Slack, Variance, and Open Commits. - Firm understanding of Program Risk and Opportunity Management and how to implement and monitor within a program - Proven experience in leading and managing teams - Experience in organizing and leading review meetings to communicate progress and issues. - Strong strategic planning and organizational skills - Excellent communication and interpersonal abilities - Demonstrated ability to manage multiple projects simultaneously - Strong analytical and problem-solving skills - Ability to develop and manage budgets effectively - Experience in stakeholder management and engagement - Knowledge of industry-specific regulations and standards - Ability to adapt to a fast-paced and changing environment - Leadership skills with a focus on team development and mentoring - Strong decision-making capabilities - Experience in developing and implementing program policies and procedures - Proficiency in Microsoft Tool Suite including Microsoft Project. Leonardo is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law. NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Here are the hiring process steps and what you can expect from us: Step 1: Application Review: Upon submitting your application, it is made available to the recruitment team to review and ensure you meet the basic qualifications. Step 2: Interview: If you have been identified to move forward in the process, you may be invited to participate in a one-on-one or panel interview. The interview format can be a phone call, in-person, or virtual meeting. Step 3: Offer: If you reach this stage of the interview process, congratulations! You will be provided an offer to join the Leonardo Electronics US Inc. team. The offer will include details about your salary, benefits package and start date. PIe7bbc9c5-
09/01/2025
Full time
Job Purpose: Join our dynamic team as the Director of Programs, where you will be responsible for leading a team of Program Managers, overseeing project management standards and ensuring alignment with organization goals. In this role, you manage programs and collaborate with diverse teams to ensure program excellence and impact. This is an exciting opportunity to influence strategic direction and make a tangible difference within our organization and the customers we serve. Duties: - Oversee the planning, implementation, and evaluation of all program activities to ensure alignment with LEI-Laser solutions business unit and LEI Corporate objectives and goals. - Lead a team of program managers, providing guidance, mentorship, and performance evaluations. - Oversee the development of and manage program budgets, including forecasting and reporting to ensure financial sustainability and stakeholder awareness. - Establish and maintain relationships with stakeholders, including LEI-Laser solutions business unit senior management and LEI Corporate Leadership as well as customers and subcontractors. - Analyze program data and metrics to assess impact and drive continuous improvement. - Ensure compliance with relevant regulations, standards, and best practices in program startup, execution and closure. - Collaborate with cross-functional teams to integrate program initiatives with overall organizational strategy. - Prepare and present regular updates and reports to LEI-Laser solutions business unit senior management and LEI Corporate leadership. - Develop and implement strategic plans to expand and enhance program offerings. - Lead the development of program policies, procedures, and protocols per LEI Corporate directives. - Coordinate and facilitate program-related meetings, workshops, and events. - Foster a culture of innovation and excellence within program teams. - Handle escalated issues and resolve complex problems related to program delivery. - Plan and manage programs from initial startup through closeout - Work with the Business Development team to prepare and review proposals Skills/Qualifications: - Bachelors degree in Physics, Electrical or Mechanical Engineering or a related technical field; Masters preferred - Minimum of 10 years of experience in program management - Familiarity with Earned Value Management and DoD Contracts including CPFF, FFP, and OTA type contracts - Proficiency in understanding and tracking program health metrics, including but not limited to, Budget, Plan, Actuals, Estimate to Complete, Slack, Variance, and Open Commits. - Firm understanding of Program Risk and Opportunity Management and how to implement and monitor within a program - Proven experience in leading and managing teams - Experience in organizing and leading review meetings to communicate progress and issues. - Strong strategic planning and organizational skills - Excellent communication and interpersonal abilities - Demonstrated ability to manage multiple projects simultaneously - Strong analytical and problem-solving skills - Ability to develop and manage budgets effectively - Experience in stakeholder management and engagement - Knowledge of industry-specific regulations and standards - Ability to adapt to a fast-paced and changing environment - Leadership skills with a focus on team development and mentoring - Strong decision-making capabilities - Experience in developing and implementing program policies and procedures - Proficiency in Microsoft Tool Suite including Microsoft Project. Leonardo is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law. NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Here are the hiring process steps and what you can expect from us: Step 1: Application Review: Upon submitting your application, it is made available to the recruitment team to review and ensure you meet the basic qualifications. Step 2: Interview: If you have been identified to move forward in the process, you may be invited to participate in a one-on-one or panel interview. The interview format can be a phone call, in-person, or virtual meeting. Step 3: Offer: If you reach this stage of the interview process, congratulations! You will be provided an offer to join the Leonardo Electronics US Inc. team. The offer will include details about your salary, benefits package and start date. PIe7bbc9c5-
B. Braun US Pharmaceutical Manufacturing LLC
Irvine, California
B. Braun Medical, Inc. Company: B. Braun US Pharmaceutical Manufacturing LLC Job Posting Location: Irvine, California, United States Functional Area: Other Areas Working Model: Onsite Days of Work: Wednesday, Thursday, Tuesday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 4253 B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS . Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit Position Summary: This position will be responsible for providing control system engineering support to troubleshoot, maintain and improvement projects of Automation and Controls systems for the Automated Equipment in a dynamic GMP regulated environment, requiring minimal downtime of the machinery. Responsibilities include fast response for troubleshooting to sustain machinery uptime when unscheduled downtime occurs, identification of improvements, light programming (modifications/configuration), and preventive/corrective maintenance for automation and control systems. Participate in projects implementation as a technical Subject Matter Expert. Production equipment to be supported includes automated and packaging machines. Automation and Controls Systems include, Allen Bradley, Siemens, GE, Telemechanic and Modicon PLCs; Wonderware In-Touch and Rockwell HMIs; Cognex, Fanuc IR Vision and Schneider Vision Systems; Ethernet IP and DeviceNet communication protocols; VFDs, and Motion Controls Systems (robot and servo motors). Automated equipment to be supported includes Plastic Injection Molding, Blow Molders, Film Extrusion, Compounding, Conveyors, Packaging Equipment, Printers, Leak Detectors, Particle Inspection Systems, and Filling and Finishing machines. Responsibilities: Essential Duties Analyzes existing equipment, processes, facilities, infrastructure and systems to identify areas of improvement and recommend solutions to optimize performance. Acts as a Subject Matter Expert for designated systems/ technologies and provide technical recommendations Anticipate potential process related problems, risks and technical conflicts and develop the necessary contingency plans to improve business continuity. Performs troubleshooting and modifications to the automated equipment adhering to Pharmaceutical and Medical Devices GMP change control standards and policies. Creates and modifies system specifications and standard operating procedures for the systems supported. Trains users and peers on systems. Supports software life cycle efforts. Contributes to development of continuous improvement to systems. Documentation, testing, commissioning and validation support following GDP. Provides project implementation support. Performs administrative, upgrades and maintenance tasks for equipment/ control systems. Supervises consultants and contractors. Ability to manage medium complex projects without assistance. The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. General: It shall be the duty of every employee while at work to take reasonable care for safety and health of himself/herself and other persons. Expertise: Knowledge & Skills Requires breadth of professional field and industry knowledge. Ability to integrate critical information and champion advanced strategies/concepts through the organization. Drives development of advanced technologies, principles and processes. Work under minimal supervision. Relies on experience and judgement to plan and accomplish assigned goals. May periodically assist in orienting, training, and/or reviewing the work of peers. Judgement is required in resolving complex problems based on experience. Interacts with internal and/or external clients and customers to negotiate and interpret information on projects and unit operations. May consult with senior management. Strong background in machine control systems including PLCs, servo controls, and Variable Speed Drives and troubleshooting. Proficiency in using personal computers and a working knowledge of software such as MS Excel and Word. Troubleshooting skills. Ability to analyze, investigate and help solve technical issues involving the equipment. Knowledge of Allen-Bradley, Siemens and GE PLCs. Good communication skills, both verbal and written. Be a team player. Ability to work with minimal supervision. Be a self-starter and proactive. Strong knowledge of equipment safety and machine guarding procedures. Ability to provide technical support and assists troubleshooting equipment when unscheduled downtime occurs. Expertise: Qualifications -Education/Experience/Training/Etc Required: Bachelor's degree required. 10-12 years related experience required. Regular and predictable attendance Occasional business travel required, Valid driver's license and passport While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Responsibilities: Other Duties: The preceding functions have been provided as examples of the types of work performed by employees assigned to this position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed in this description are representative of the knowledge, skill, and/or ability required. Management reserves the right to add, modify, change or rescind the work assignments of different positions due to reasonable accommodation or other reasons. Physical Demands: While performing the duties of this job, the employee is expected to: Light work - Exerting up to 20 lbs of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Lifting, Carrying, Pushing, Pulling and Reaching: Occasionally:Reaching upward and downward, Push/pull Frequently:Stand, Sit Constantly:N/A Activities: Occasionally:Handling, Push/pull, Reaching upward and downward Frequently:Sitting , Standing, Talking - ordinary, loud/quick, Walking Constantly:N/A Environmental Conditions: Occasionally:N/A Frequently:Proximity to moving parts Constantly:N/A Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Noise Intensity:Moderate Occasionally:N/A Frequently:Office environment, Production/manufacturing environment Constantly:N/A $122,407.00 - $153,014.00/ Annually The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Compensation decisions are dependent on the facts and circumstances of each case. The range provided is a reasonable estimate. B. Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement. To learn more about B. Braun and our safety healthcare products or view a listing of our employment opportunities, please visit us on the internet at . Through its "Sharing Expertise " initiative, B. Braun promotes best practices for continuous improvement of healthcare products and services. We are an equal opportunity employer. We evaluate applications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected characteristic. Know Your Rights: Workplace Discrimination is Illegal, click here . All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status . click apply for full job details
09/01/2025
Full time
B. Braun Medical, Inc. Company: B. Braun US Pharmaceutical Manufacturing LLC Job Posting Location: Irvine, California, United States Functional Area: Other Areas Working Model: Onsite Days of Work: Wednesday, Thursday, Tuesday, Friday, Monday Shift: 5X8 Relocation Available: No Requisition ID: 4253 B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS . Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit Position Summary: This position will be responsible for providing control system engineering support to troubleshoot, maintain and improvement projects of Automation and Controls systems for the Automated Equipment in a dynamic GMP regulated environment, requiring minimal downtime of the machinery. Responsibilities include fast response for troubleshooting to sustain machinery uptime when unscheduled downtime occurs, identification of improvements, light programming (modifications/configuration), and preventive/corrective maintenance for automation and control systems. Participate in projects implementation as a technical Subject Matter Expert. Production equipment to be supported includes automated and packaging machines. Automation and Controls Systems include, Allen Bradley, Siemens, GE, Telemechanic and Modicon PLCs; Wonderware In-Touch and Rockwell HMIs; Cognex, Fanuc IR Vision and Schneider Vision Systems; Ethernet IP and DeviceNet communication protocols; VFDs, and Motion Controls Systems (robot and servo motors). Automated equipment to be supported includes Plastic Injection Molding, Blow Molders, Film Extrusion, Compounding, Conveyors, Packaging Equipment, Printers, Leak Detectors, Particle Inspection Systems, and Filling and Finishing machines. Responsibilities: Essential Duties Analyzes existing equipment, processes, facilities, infrastructure and systems to identify areas of improvement and recommend solutions to optimize performance. Acts as a Subject Matter Expert for designated systems/ technologies and provide technical recommendations Anticipate potential process related problems, risks and technical conflicts and develop the necessary contingency plans to improve business continuity. Performs troubleshooting and modifications to the automated equipment adhering to Pharmaceutical and Medical Devices GMP change control standards and policies. Creates and modifies system specifications and standard operating procedures for the systems supported. Trains users and peers on systems. Supports software life cycle efforts. Contributes to development of continuous improvement to systems. Documentation, testing, commissioning and validation support following GDP. Provides project implementation support. Performs administrative, upgrades and maintenance tasks for equipment/ control systems. Supervises consultants and contractors. Ability to manage medium complex projects without assistance. The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. General: It shall be the duty of every employee while at work to take reasonable care for safety and health of himself/herself and other persons. Expertise: Knowledge & Skills Requires breadth of professional field and industry knowledge. Ability to integrate critical information and champion advanced strategies/concepts through the organization. Drives development of advanced technologies, principles and processes. Work under minimal supervision. Relies on experience and judgement to plan and accomplish assigned goals. May periodically assist in orienting, training, and/or reviewing the work of peers. Judgement is required in resolving complex problems based on experience. Interacts with internal and/or external clients and customers to negotiate and interpret information on projects and unit operations. May consult with senior management. Strong background in machine control systems including PLCs, servo controls, and Variable Speed Drives and troubleshooting. Proficiency in using personal computers and a working knowledge of software such as MS Excel and Word. Troubleshooting skills. Ability to analyze, investigate and help solve technical issues involving the equipment. Knowledge of Allen-Bradley, Siemens and GE PLCs. Good communication skills, both verbal and written. Be a team player. Ability to work with minimal supervision. Be a self-starter and proactive. Strong knowledge of equipment safety and machine guarding procedures. Ability to provide technical support and assists troubleshooting equipment when unscheduled downtime occurs. Expertise: Qualifications -Education/Experience/Training/Etc Required: Bachelor's degree required. 10-12 years related experience required. Regular and predictable attendance Occasional business travel required, Valid driver's license and passport While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Responsibilities: Other Duties: The preceding functions have been provided as examples of the types of work performed by employees assigned to this position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed in this description are representative of the knowledge, skill, and/or ability required. Management reserves the right to add, modify, change or rescind the work assignments of different positions due to reasonable accommodation or other reasons. Physical Demands: While performing the duties of this job, the employee is expected to: Light work - Exerting up to 20 lbs of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Lifting, Carrying, Pushing, Pulling and Reaching: Occasionally:Reaching upward and downward, Push/pull Frequently:Stand, Sit Constantly:N/A Activities: Occasionally:Handling, Push/pull, Reaching upward and downward Frequently:Sitting , Standing, Talking - ordinary, loud/quick, Walking Constantly:N/A Environmental Conditions: Occasionally:N/A Frequently:Proximity to moving parts Constantly:N/A Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Noise Intensity:Moderate Occasionally:N/A Frequently:Office environment, Production/manufacturing environment Constantly:N/A $122,407.00 - $153,014.00/ Annually The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Compensation decisions are dependent on the facts and circumstances of each case. The range provided is a reasonable estimate. B. Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement. To learn more about B. Braun and our safety healthcare products or view a listing of our employment opportunities, please visit us on the internet at . Through its "Sharing Expertise " initiative, B. Braun promotes best practices for continuous improvement of healthcare products and services. We are an equal opportunity employer. We evaluate applications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected characteristic. Know Your Rights: Workplace Discrimination is Illegal, click here . All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status . click apply for full job details
