Join the Keystone Community We are changing the world, one world at a time, by providing various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets. Location: Lambert International Airport-St. Louis, MO 3rd Shift: 10 PM-6:30 AM (Sunday-Thursday) Salary: $21.44 - $24.33 per hour including a $0.35 shift differential Job Summary: The Facilities Maintenance Technician I is responsible for performing essential preventive maintenance and repair of building plumbing, mechanical, electrical, and control systems, including refrigeration, and A/C units. Essential Job Duties and Responsibilities Repair, maintain/monitor all equipment and amenities. Diagnose equipment issues & assist in the diagnosis of process-related problems. Train other maintenance personnel on mechanical systems and personal areas of expertise. Change of all filters for HVAC as required. Change light bulbs, interior and exterior, as needed. Use computer-based CMMS system to create and closeout work orders with data including labor hours, equipment maintenance and parts used. Carry a company radio/cell phone for coverage and site-wide communication. Available to work flexible hours. Available for an assigned emergency on-call schedule. Assists outside service personnel, inspectors and vendors. Keeps workspace neat, clean and free of clutter. Understand and comply with OSHA, Safety and PPE requirements. Perform other work-related duties as assigned. Benefits Included 401(k) 401(k) matching Dental insurance, Vision insurance & Health insurance Employee assistance program Life insurance Paid time off Birthday off Referral program Tuition reimbursement KNOWLEDGE, SKILLS, AND EDUCATION A minimum of 2 years' experience in mechanical, electrical, HVAC, with an emphasis in plumbing and carpentry maintenance or any combination. Experience performing preventative maintenance (PM's) on equipment. HS Diploma or Equivalent Professional Painting experience is a plus. Commercial Carpentry experience is a plus. WORKING CONDITIONS, TRAVEL, PHYSICAL REQUIREMENTS This is a full-time position, 40 hours per week, with additional hours as needed to address the needs of the customer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions/physical requirements of the job. Additional requirements are as follows: Ability to stand for long periods. Ability to walk on level, uneven and slippery surfaces. Ability to frequently reach, twist, turn, kneel, bend, squat and stoop. Ability to operate office equipment, computer and tools. Ability to walk long distances within the airport. Ability to regularly lift, drag, carry and push equipment, tools and supplies up to 75 pounds. Ability to climb ladders. Ability to function in high-pressure situations. Ability to drive a vehicle. Exposure to mechanical, electrical and noise hazards Exposure to inclement weather conditions OTHER REQUIREMENTS Pass a Keystone Management, LLC background check. Pass a Federal Aviation Administration background check. Pass a Lambert International Airport SIDA badge and drivers test within two (2) tries. Pass a driving history check. Possess a current driving license. This position is located in St. Louis, MO. Keystone Management, LLC is an Equal Opportunity Employer offering competitive compensation and an excellent benefits package. Upon receiving contingent offer of employment, selected candidate must comply with the following as a condition of employment: CANDIDATE MUST SUCCESSFULLY PASS BACKGROUND AND DRUG SCREENS, AND MOTOR VEHICLE CHECK (MVR). EOE Statement: Keystone Management, LLC is an Equal Opportunity/Affirmative Action employer. It is our policy to employ qualified applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, genetic information, or other protected status. E-Verify Company Information: KEYSTONE MANAGEMENT, LLC participates in the Federal Government E-Verify Program which is an internet-based system that allows businesses to determine the eligibility of their employees to work in the United States. Federal law required all employers to verify the identity and employment eligibility of all persons hired to work in the United States. Powered by JazzHR Compensation details: 21.44-24.33 Hourly Wage PI13bfcf08df44-9234
09/02/2025
Full time
Join the Keystone Community We are changing the world, one world at a time, by providing various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets. Location: Lambert International Airport-St. Louis, MO 3rd Shift: 10 PM-6:30 AM (Sunday-Thursday) Salary: $21.44 - $24.33 per hour including a $0.35 shift differential Job Summary: The Facilities Maintenance Technician I is responsible for performing essential preventive maintenance and repair of building plumbing, mechanical, electrical, and control systems, including refrigeration, and A/C units. Essential Job Duties and Responsibilities Repair, maintain/monitor all equipment and amenities. Diagnose equipment issues & assist in the diagnosis of process-related problems. Train other maintenance personnel on mechanical systems and personal areas of expertise. Change of all filters for HVAC as required. Change light bulbs, interior and exterior, as needed. Use computer-based CMMS system to create and closeout work orders with data including labor hours, equipment maintenance and parts used. Carry a company radio/cell phone for coverage and site-wide communication. Available to work flexible hours. Available for an assigned emergency on-call schedule. Assists outside service personnel, inspectors and vendors. Keeps workspace neat, clean and free of clutter. Understand and comply with OSHA, Safety and PPE requirements. Perform other work-related duties as assigned. Benefits Included 401(k) 401(k) matching Dental insurance, Vision insurance & Health insurance Employee assistance program Life insurance Paid time off Birthday off Referral program Tuition reimbursement KNOWLEDGE, SKILLS, AND EDUCATION A minimum of 2 years' experience in mechanical, electrical, HVAC, with an emphasis in plumbing and carpentry maintenance or any combination. Experience performing preventative maintenance (PM's) on equipment. HS Diploma or Equivalent Professional Painting experience is a plus. Commercial Carpentry experience is a plus. WORKING CONDITIONS, TRAVEL, PHYSICAL REQUIREMENTS This is a full-time position, 40 hours per week, with additional hours as needed to address the needs of the customer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions/physical requirements of the job. Additional requirements are as follows: Ability to stand for long periods. Ability to walk on level, uneven and slippery surfaces. Ability to frequently reach, twist, turn, kneel, bend, squat and stoop. Ability to operate office equipment, computer and tools. Ability to walk long distances within the airport. Ability to regularly lift, drag, carry and push equipment, tools and supplies up to 75 pounds. Ability to climb ladders. Ability to function in high-pressure situations. Ability to drive a vehicle. Exposure to mechanical, electrical and noise hazards Exposure to inclement weather conditions OTHER REQUIREMENTS Pass a Keystone Management, LLC background check. Pass a Federal Aviation Administration background check. Pass a Lambert International Airport SIDA badge and drivers test within two (2) tries. Pass a driving history check. Possess a current driving license. This position is located in St. Louis, MO. Keystone Management, LLC is an Equal Opportunity Employer offering competitive compensation and an excellent benefits package. Upon receiving contingent offer of employment, selected candidate must comply with the following as a condition of employment: CANDIDATE MUST SUCCESSFULLY PASS BACKGROUND AND DRUG SCREENS, AND MOTOR VEHICLE CHECK (MVR). EOE Statement: Keystone Management, LLC is an Equal Opportunity/Affirmative Action employer. It is our policy to employ qualified applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, genetic information, or other protected status. E-Verify Company Information: KEYSTONE MANAGEMENT, LLC participates in the Federal Government E-Verify Program which is an internet-based system that allows businesses to determine the eligibility of their employees to work in the United States. Federal law required all employers to verify the identity and employment eligibility of all persons hired to work in the United States. Powered by JazzHR Compensation details: 21.44-24.33 Hourly Wage PI13bfcf08df44-9234
Grow your career with Cargill in Oklahoma City, OK ! Join our team as a full time Industrial Electrical Technician on our 2nd and 3rd shift! Pay range $30.00-$40.00/hr and comprehensive benefits such as Medical, Dental, Vision, and Prescription Drug Insurance, Paid Vacation and Holidays, 401(k) with Cargill matching contributions, Paid Parental Leave and more! A Typical Work Day May Include: Completing preventative, predictive, and reactive industrial maintenance throughout the facility Installing, maintaining, testing, evaluating, and repairing various electrical components and systems Operating standard maintenance tools such as power tools, electric tools, precision maintenance tools, preventative maintenance technology tools, etc. Utilize maintenance trades and components such as welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, hydraulic and pneumatic systems Interpreting and understanding electrical and mechanical schematics, blueprints, and/or operation manuals Documenting completed work and the conditions found, utilizing maintenance computer software as necessary Interacting regularly with external vendors, peers, and management to pursue continuous improvement of facility operations and promote a teamwork focused environment Operating mobile equipment such as forklifts, loaders, scissor lifts, and aerial lifts Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Other duties as assigned What You Will Need: Eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) including a respirator Ability to work in elevated areas (4 feet and above) Ability to understand and communicate in English (verbal/written) Ability to work in confined spaces Basic computer skills Ability to work overtime including holidays, nights, weekends, or different shifts with advance notice Minimum of one year of experience with industrial electrical knowledge and any mechanical maintenance trade Equal Opportunity Employer, including Disability/Vet . Date posted: 08/25/2025
09/02/2025
Full time
Grow your career with Cargill in Oklahoma City, OK ! Join our team as a full time Industrial Electrical Technician on our 2nd and 3rd shift! Pay range $30.00-$40.00/hr and comprehensive benefits such as Medical, Dental, Vision, and Prescription Drug Insurance, Paid Vacation and Holidays, 401(k) with Cargill matching contributions, Paid Parental Leave and more! A Typical Work Day May Include: Completing preventative, predictive, and reactive industrial maintenance throughout the facility Installing, maintaining, testing, evaluating, and repairing various electrical components and systems Operating standard maintenance tools such as power tools, electric tools, precision maintenance tools, preventative maintenance technology tools, etc. Utilize maintenance trades and components such as welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, hydraulic and pneumatic systems Interpreting and understanding electrical and mechanical schematics, blueprints, and/or operation manuals Documenting completed work and the conditions found, utilizing maintenance computer software as necessary Interacting regularly with external vendors, peers, and management to pursue continuous improvement of facility operations and promote a teamwork focused environment Operating mobile equipment such as forklifts, loaders, scissor lifts, and aerial lifts Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Other duties as assigned What You Will Need: Eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) including a respirator Ability to work in elevated areas (4 feet and above) Ability to understand and communicate in English (verbal/written) Ability to work in confined spaces Basic computer skills Ability to work overtime including holidays, nights, weekends, or different shifts with advance notice Minimum of one year of experience with industrial electrical knowledge and any mechanical maintenance trade Equal Opportunity Employer, including Disability/Vet . Date posted: 08/25/2025
As a Maintenance Apprentice you work in a team environment alongside other maintenance technicians and the production team to perform routine preventative maintenance and repairs on production equipment, fabrication, and building facilities. You will perform a wide rage or repairs to include but not limited to mechanical, plumbing, electrical, pneumatic, and hydraulic system. Work on fabrication and design for new systems and improvements to others. _ _ Essential Functions Perform routine preventative maintenance procedures on various production equipment to maintain the machinery in peak operational performance. Respond quickly to a malfunction inhibiting production and perform troubleshooting and repair work as necessary to restore the equipment to operation. Use technical documentation to quick diagnose system malfunctions and affect repairs. Escalate issues and problems quickly to the Maintenance Team Lead and the Maintenance Manager. Coordinate with the Production Shift Supervisor to ensure all machinery is operating and all maintenance issues are known. Assist and maintain an inventory record of parts and supplies. Assist in Creating, Implementing, and modification of Standard Operating Procedures (SOP) for the Maintenance Department. Communicate well with Extrusion Operators to understand problems with equipment and help resolve current and any preventive issues. Qualifications Required Basic understanding of pneumatics, hydraulics, mechanical, electrical circuits, pump theory, heat transfer, and fluid flow. Proficient in reading and interpreting electrical and mechanical drawings to aid in troubleshooting and diagnosing probable faults. Able to follow troubleshooting guides in technical manuals and other technical documentation. Ability to work in a team environment. Working knowledge of tools and test devices. Good problem-solving skills and attention to detail. Physically capable of lifting 50 pounds. Ability to maintain a driver's license Basic knowledge of rigging. Education and/or Experience High school diploma or equivalent. Desire to participate in an apprenticeship program Welding and fabrication experience preferred. Working knowledge of Microsoft Office suite and CMMS software is preferred. Sunday - Thursday, 10:45pm - 7:15pm Sunday - Thursday, 10:45pm - 7:15pm PI3539fcc1bd9d-4201
09/01/2025
Full time
As a Maintenance Apprentice you work in a team environment alongside other maintenance technicians and the production team to perform routine preventative maintenance and repairs on production equipment, fabrication, and building facilities. You will perform a wide rage or repairs to include but not limited to mechanical, plumbing, electrical, pneumatic, and hydraulic system. Work on fabrication and design for new systems and improvements to others. _ _ Essential Functions Perform routine preventative maintenance procedures on various production equipment to maintain the machinery in peak operational performance. Respond quickly to a malfunction inhibiting production and perform troubleshooting and repair work as necessary to restore the equipment to operation. Use technical documentation to quick diagnose system malfunctions and affect repairs. Escalate issues and problems quickly to the Maintenance Team Lead and the Maintenance Manager. Coordinate with the Production Shift Supervisor to ensure all machinery is operating and all maintenance issues are known. Assist and maintain an inventory record of parts and supplies. Assist in Creating, Implementing, and modification of Standard Operating Procedures (SOP) for the Maintenance Department. Communicate well with Extrusion Operators to understand problems with equipment and help resolve current and any preventive issues. Qualifications Required Basic understanding of pneumatics, hydraulics, mechanical, electrical circuits, pump theory, heat transfer, and fluid flow. Proficient in reading and interpreting electrical and mechanical drawings to aid in troubleshooting and diagnosing probable faults. Able to follow troubleshooting guides in technical manuals and other technical documentation. Ability to work in a team environment. Working knowledge of tools and test devices. Good problem-solving skills and attention to detail. Physically capable of lifting 50 pounds. Ability to maintain a driver's license Basic knowledge of rigging. Education and/or Experience High school diploma or equivalent. Desire to participate in an apprenticeship program Welding and fabrication experience preferred. Working knowledge of Microsoft Office suite and CMMS software is preferred. Sunday - Thursday, 10:45pm - 7:15pm Sunday - Thursday, 10:45pm - 7:15pm PI3539fcc1bd9d-4201
The Maintenance Technician will troubleshoot, install, setup, maintain, repair and upgrade production lines, will assemble and disassemble mixing, heating and extrusion equipment, and will perform building and HVAC maintenance. This position will assist with inventory management of supplies, materials, parts & tools. The Maintenance Technician will play an active and instrumental role during large-scale production & building upgrades and/or changeover projects. The Maintenance Technician will be responsible for partnering with outside vendors, as required, to successfully perform all expectations of the role. Essential Duties and Responsibilities: Perform troubleshooting, repair and installation of: -Mechanical devices and components including Gears, bearings, drives and gearboxes -Electronic devices and components including low and high voltage AC & DC motors, sensors, PLC's, actuators, power supplies, transformers, heating and cooling controls and systems -Pneumatics systems including compressors, logic circuits, actuators, sensors Perform preventive inspections, lubrication, periodic and incidental maintenance, and repair of production equipment & HVAC. Perform maintenance, inspection, testing, and operation of all steam boilers and related equipment. Perform fabrication of equipment and parts through welding and some basic machining processes Assist in the design, specification and/or procurement of new equipment Coach and train production operators in basic maintenance of production machinery and equipment Work as a team and communicate professionally. Maintain a clean and safe work environment. Perform duties within quality control and safety guidelines. Keep work area, shop floor and other areas clean and maintained. Follow standard work protocols, WOs, WIPs Understand and promote safety in all areas of the facility Communicate status of maintenance projects and issues with department lead and management Accept direction and work with minimal supervision Education and Experience High school diploma or general education degree and five or more years industrial maintenance or equivalent experience Two-year technical training degree desired Forklift certification Proficient use of hand and power tools, pipe threading, TIG welding Electrical experience with AC/DC high and low voltages Read and comprehend schematics, blueprints, specifications, procedure manuals and instructions Possess a valid Special MN Boiler's License, or ability to obtain Skilled operation of stand-up and sit-down forklifts. Knowledge of maintenance and asset management software (FIIX, MP2 etc.) Experience in manufacturing environment Experience in an FDA regulated environment Compensation details: 30-38 PI0f138b1832e7-9157
09/01/2025
Full time
The Maintenance Technician will troubleshoot, install, setup, maintain, repair and upgrade production lines, will assemble and disassemble mixing, heating and extrusion equipment, and will perform building and HVAC maintenance. This position will assist with inventory management of supplies, materials, parts & tools. The Maintenance Technician will play an active and instrumental role during large-scale production & building upgrades and/or changeover projects. The Maintenance Technician will be responsible for partnering with outside vendors, as required, to successfully perform all expectations of the role. Essential Duties and Responsibilities: Perform troubleshooting, repair and installation of: -Mechanical devices and components including Gears, bearings, drives and gearboxes -Electronic devices and components including low and high voltage AC & DC motors, sensors, PLC's, actuators, power supplies, transformers, heating and cooling controls and systems -Pneumatics systems including compressors, logic circuits, actuators, sensors Perform preventive inspections, lubrication, periodic and incidental maintenance, and repair of production equipment & HVAC. Perform maintenance, inspection, testing, and operation of all steam boilers and related equipment. Perform fabrication of equipment and parts through welding and some basic machining processes Assist in the design, specification and/or procurement of new equipment Coach and train production operators in basic maintenance of production machinery and equipment Work as a team and communicate professionally. Maintain a clean and safe work environment. Perform duties within quality control and safety guidelines. Keep work area, shop floor and other areas clean and maintained. Follow standard work protocols, WOs, WIPs Understand and promote safety in all areas of the facility Communicate status of maintenance projects and issues with department lead and management Accept direction and work with minimal supervision Education and Experience High school diploma or general education degree and five or more years industrial maintenance or equivalent experience Two-year technical training degree desired Forklift certification Proficient use of hand and power tools, pipe threading, TIG welding Electrical experience with AC/DC high and low voltages Read and comprehend schematics, blueprints, specifications, procedure manuals and instructions Possess a valid Special MN Boiler's License, or ability to obtain Skilled operation of stand-up and sit-down forklifts. Knowledge of maintenance and asset management software (FIIX, MP2 etc.) Experience in manufacturing environment Experience in an FDA regulated environment Compensation details: 30-38 PI0f138b1832e7-9157
ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer's specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: Craftsmanship - We take pride in precision and quality - every mesh we make reflects our skill and standards. Care - We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step. Trust - We build lasting relationships through consistent quality, transparency, and reliability. Accountable - We own our work, honor our commitments, and deliver results you can count on. Empower - We grow together, investing in people and partners to innovate, improve, and lead with confidence. Our Perks & Benefits: Competitive pay Comprehensive medical, dental, and vision insurance plans 100% employer paid medical option available Short- and long-term disability insurance Life and AD&D insurance 11 paid company holidays Paid vacation time Paid sick leave 401(k) retirement plan with an employer match of up to 4% $5,000 undergraduate & $15,000 graduate annual tuition reimbursement In-house career growth development programs $5000 SIGN-ON BONUS ($2500 AFTER 90 DAYS AND $2500 AFTER 12 MONTHS) SHIFT: 3rd Shift Friday-Sunday 7pm-7:30am Training will be Monday-Friday 7am-3:30pm for up to 6 weeks We are seeking an experienced Maintenance Technician that will be responsible for facility and equipment maintenance, maintaining our facility to provide a neat and professional appearance and optimizing repair and maintenance expenditures. Assist in developing and interpreting blueprints and schematics. Key factors to success are the ability to assist in fostering a well-trained and motivated staff, be a team player while maintaining a professional demeanor are critical. SUMMARY Responsible for facility and industrial machine equipment maintenance. Assist in developing and interpreting blueprints and schematics. PRIMARY RESPONSIBILITIES Responsible for troubleshooting production machines. Follow and interpret blueprints. Follow and interpret schematics. Responsible for the maintenance of complete production lines. Complete PM in a timely manner. Assure compliance with appropriate safety practices and procedures and with applicable federal, State, and local codes, regulations, and requirements. Perform skilled maintenance and repair on mechanical and electrical equipment. Maintain various records related to materials and work orders. KNOWLEDGE AND SKILL REQUIREMENTS Five years of experience in related field or three-year technical schooling. Basic computer and mathematical skills. Experience in troubleshooting of one or more of the following PLC programs: Siemens, S5, S7, ABB, and Bosch is a plus. Understand control wiring, and logic diagrams. Heavy lifting (up to 50 pounds), bending, and stooping may be required. Must be able to work overtime as needed. Responsible for assisting with improvements of the production equipment and controls to increase productivity throughout the Columbus facility. Must be dedicated to, and assist in the carrying out of the goals, plans, and policies of the department. They will carry oneself in a manner consistent with sound principles. They will also be responsible for following all policies, procedures, and instructions in accordance with company guidelines. Ability to multitask, completing projects while supporting daily activities. Excellent oral and written communication skills. Work in a team-oriented process by being an active participant. Work with minimal supervision. PLC and HMI troubleshooting experience are a plus. Desire for "hands-on" engineering. Interpret component catalogs. Competitive pay commensurate with skill set. An aptitude test is required for selected candidates. Compensation details: 32-34 Hourly Wage PId81a6ea0a51a-5366
09/01/2025
Full time
ABOUT ITC MANUFACTURING: Our Why: Pride in Every Weld. Our purpose is simple - to build trust with relentless quality and to empower every person by turning hard work into lasting opportunity. Our Mission: We engineer and manufacture precision wire mesh solutions that meet the highest standards of quality, safety, and performance. By aligning our expertise with each customer's specific needs, we build trust through consistent delivery, proven durability, and pride in every weld. Our Core Values: Craftsmanship - We take pride in precision and quality - every mesh we make reflects our skill and standards. Care - We value people and processes, protecting safety, promoting sustainability, and creating satisfaction at every step. Trust - We build lasting relationships through consistent quality, transparency, and reliability. Accountable - We own our work, honor our commitments, and deliver results you can count on. Empower - We grow together, investing in people and partners to innovate, improve, and lead with confidence. Our Perks & Benefits: Competitive pay Comprehensive medical, dental, and vision insurance plans 100% employer paid medical option available Short- and long-term disability insurance Life and AD&D insurance 11 paid company holidays Paid vacation time Paid sick leave 401(k) retirement plan with an employer match of up to 4% $5,000 undergraduate & $15,000 graduate annual tuition reimbursement In-house career growth development programs $5000 SIGN-ON BONUS ($2500 AFTER 90 DAYS AND $2500 AFTER 12 MONTHS) SHIFT: 3rd Shift Friday-Sunday 7pm-7:30am Training will be Monday-Friday 7am-3:30pm for up to 6 weeks We are seeking an experienced Maintenance Technician that will be responsible for facility and equipment maintenance, maintaining our facility to provide a neat and professional appearance and optimizing repair and maintenance expenditures. Assist in developing and interpreting blueprints and schematics. Key factors to success are the ability to assist in fostering a well-trained and motivated staff, be a team player while maintaining a professional demeanor are critical. SUMMARY Responsible for facility and industrial machine equipment maintenance. Assist in developing and interpreting blueprints and schematics. PRIMARY RESPONSIBILITIES Responsible for troubleshooting production machines. Follow and interpret blueprints. Follow and interpret schematics. Responsible for the maintenance of complete production lines. Complete PM in a timely manner. Assure compliance with appropriate safety practices and procedures and with applicable federal, State, and local codes, regulations, and requirements. Perform skilled maintenance and repair on mechanical and electrical equipment. Maintain various records related to materials and work orders. KNOWLEDGE AND SKILL REQUIREMENTS Five years of experience in related field or three-year technical schooling. Basic computer and mathematical skills. Experience in troubleshooting of one or more of the following PLC programs: Siemens, S5, S7, ABB, and Bosch is a plus. Understand control wiring, and logic diagrams. Heavy lifting (up to 50 pounds), bending, and stooping may be required. Must be able to work overtime as needed. Responsible for assisting with improvements of the production equipment and controls to increase productivity throughout the Columbus facility. Must be dedicated to, and assist in the carrying out of the goals, plans, and policies of the department. They will carry oneself in a manner consistent with sound principles. They will also be responsible for following all policies, procedures, and instructions in accordance with company guidelines. Ability to multitask, completing projects while supporting daily activities. Excellent oral and written communication skills. Work in a team-oriented process by being an active participant. Work with minimal supervision. PLC and HMI troubleshooting experience are a plus. Desire for "hands-on" engineering. Interpret component catalogs. Competitive pay commensurate with skill set. An aptitude test is required for selected candidates. Compensation details: 32-34 Hourly Wage PId81a6ea0a51a-5366
Description: Alsum Farms & Produce Inc., a grower, packer, and shipper of potatoes & onions located in Friesland, WI is looking for full-time Third (3rd) Shift Maintenance Technicians! As a Third (3rd) Shift Maintenance Technician, you will perform the maintenance of large production machinery while maintaining records of repairs. Essential Duties and Responsibilities: Performs preventive maintenance inspections and service on machines Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary Lubricates machines to ensure effective performance Records and reports damaged, worn, or broken parts to be ordered Installs replacement parts for machines Identifies the causes of unexpected breakdowns of machines Repairs broken machines quickly and efficiently Use of CMMS for documenting work performed Maintains a clean, organized, store room, and maintains shop areas, tools, and supplies Coordinates with manager to schedule regular maintenance on machines Collaborates with Maintenance manager regarding new products being added and modifications that will be required Makes necessary modifications and testing equipment; confers with production manager regarding test results and makes additional alterations to machinery as required Perform other related duties as necessary or assigned Education and Experience: Some vocational or community college with related coursework or equivalent experience, required. Why the Maintenance Technician position is important to Alsum Farms and Produce: Poorly maintained resources can completely stop production & operations. We need people like you to help maintain the facilities so we can provide field to fork potatoes to the dinner tables of Americans. Job Details: Job Type: Full-time Job Schedule: Third (3rd) Shift 10:30pm to 7:00am; Monday through Friday Salary: $24.90-$33.00 per hour depending on experience Work Location: Friesland, WI Travel Requirements: None Supplemental Pay: Quarterly Attendance Bonus Monthly Tool Reimbursement Company-provided uniforms Requirements: Required Skills and Abilities: Mechanically inclined with great problem-solving skills Works well independently and with others Good communication skills Organized with attention to detail Ability to work in a fast-paced and stressful environment Valid state motor vehicle license with acceptable motor vehicle record Self-motivated and able to function as part of a team Ability to utilize Computerized Maintenance Management System (CMMS) software Ability to utilize Human Resource Information System (HRIS) software Physical and Environmental Demands: Prolonged periods standing and walking Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery Must be able to visually inspect machines Must be able to climb ladders when needed Must be able to lift and carry up to 100 pounds Must wear safety glasses and hearing protection in designated areas Exposure to airborne particles or fumes Perform repairs at heights greater than 20 feet Ability to withstand cold and warm working conditions Alsum Benefits Alsum Farms & Produce offers its full-time (30 hours or more) employees: Employer contributed health plan Employer paid life insurance Voluntary dental, life, disability, and vision insurance Onsite fitness center Vacation and holiday pay Profit sharing 401(k) with company match Employee discounts Educational assistance program We are an Equal Opportunity Employer and a Drug Free Workplace Compensation details: 24.9-33 Hourly Wage PI58c01cf1ed29-2512
09/01/2025
Full time
Description: Alsum Farms & Produce Inc., a grower, packer, and shipper of potatoes & onions located in Friesland, WI is looking for full-time Third (3rd) Shift Maintenance Technicians! As a Third (3rd) Shift Maintenance Technician, you will perform the maintenance of large production machinery while maintaining records of repairs. Essential Duties and Responsibilities: Performs preventive maintenance inspections and service on machines Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary Lubricates machines to ensure effective performance Records and reports damaged, worn, or broken parts to be ordered Installs replacement parts for machines Identifies the causes of unexpected breakdowns of machines Repairs broken machines quickly and efficiently Use of CMMS for documenting work performed Maintains a clean, organized, store room, and maintains shop areas, tools, and supplies Coordinates with manager to schedule regular maintenance on machines Collaborates with Maintenance manager regarding new products being added and modifications that will be required Makes necessary modifications and testing equipment; confers with production manager regarding test results and makes additional alterations to machinery as required Perform other related duties as necessary or assigned Education and Experience: Some vocational or community college with related coursework or equivalent experience, required. Why the Maintenance Technician position is important to Alsum Farms and Produce: Poorly maintained resources can completely stop production & operations. We need people like you to help maintain the facilities so we can provide field to fork potatoes to the dinner tables of Americans. Job Details: Job Type: Full-time Job Schedule: Third (3rd) Shift 10:30pm to 7:00am; Monday through Friday Salary: $24.90-$33.00 per hour depending on experience Work Location: Friesland, WI Travel Requirements: None Supplemental Pay: Quarterly Attendance Bonus Monthly Tool Reimbursement Company-provided uniforms Requirements: Required Skills and Abilities: Mechanically inclined with great problem-solving skills Works well independently and with others Good communication skills Organized with attention to detail Ability to work in a fast-paced and stressful environment Valid state motor vehicle license with acceptable motor vehicle record Self-motivated and able to function as part of a team Ability to utilize Computerized Maintenance Management System (CMMS) software Ability to utilize Human Resource Information System (HRIS) software Physical and Environmental Demands: Prolonged periods standing and walking Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery Must be able to visually inspect machines Must be able to climb ladders when needed Must be able to lift and carry up to 100 pounds Must wear safety glasses and hearing protection in designated areas Exposure to airborne particles or fumes Perform repairs at heights greater than 20 feet Ability to withstand cold and warm working conditions Alsum Benefits Alsum Farms & Produce offers its full-time (30 hours or more) employees: Employer contributed health plan Employer paid life insurance Voluntary dental, life, disability, and vision insurance Onsite fitness center Vacation and holiday pay Profit sharing 401(k) with company match Employee discounts Educational assistance program We are an Equal Opportunity Employer and a Drug Free Workplace Compensation details: 24.9-33 Hourly Wage PI58c01cf1ed29-2512
Compensation Details: $20.00 - $28 per hour Why should you join our team? We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don't often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand. In addition to providing our employees a great culture, Ace also offers competitive benefits that address life's necessities and perks, many of which expand and improve year after year, including: Weekly Pay Paid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire. Comprehensive health coverage (medical, dental, vision and disability - up to 26 weeks short-term disability and long-term disability ) & life insurance benefits for you and your dependents. Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 10.4% of total eligible compensation Dock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver position Long-term Career Opportunities: Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters. Our company is growing, and we would love to have you grow with us! Tuition Reimbursement Program Employee Recognition Program Merchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more! Employee Assistance Program (EAP) - access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events. Adoption cost reimbursement Identity theft protection Benefits are provided in compliance with applicable plans and policies. Job Description: Maintenance Mechanic 2nd/3rd Shift What You'll Do Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary. Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment. Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. Record type and cost of maintenance or repair work. Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization. What you need to succeed: Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role. Be an active participant in contributing to a successful safety culture in the facility. High school diploma or GED equivalent preferred. Must be at least 18 years of age. Ability and willingness to work non-traditional shifts and hours. Experience with general maintenance/ electrical duties preferred. Have general knowledge of conveyors systems, and ability to trouble shoot. Ability to CMMS and good computer skills for utilizing PM Software system. Maintenance experience within a manufacturing/ distribution environment. Want to be notified when new jobs are posted? Follow the link below to create an account and set up custom job alerts: Create Job Alert We want to hear from you! When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products? Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets. Equal Opportunity Employer Ace Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws. Disclaimer The pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual's education, training and experience, the position's work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written "Position Description" is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
08/29/2025
Full time
Compensation Details: $20.00 - $28 per hour Why should you join our team? We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don't often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand. In addition to providing our employees a great culture, Ace also offers competitive benefits that address life's necessities and perks, many of which expand and improve year after year, including: Weekly Pay Paid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire. Comprehensive health coverage (medical, dental, vision and disability - up to 26 weeks short-term disability and long-term disability ) & life insurance benefits for you and your dependents. Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 10.4% of total eligible compensation Dock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver position Long-term Career Opportunities: Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters. Our company is growing, and we would love to have you grow with us! Tuition Reimbursement Program Employee Recognition Program Merchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more! Employee Assistance Program (EAP) - access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events. Adoption cost reimbursement Identity theft protection Benefits are provided in compliance with applicable plans and policies. Job Description: Maintenance Mechanic 2nd/3rd Shift What You'll Do Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary. Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment. Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. Record type and cost of maintenance or repair work. Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization. What you need to succeed: Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role. Be an active participant in contributing to a successful safety culture in the facility. High school diploma or GED equivalent preferred. Must be at least 18 years of age. Ability and willingness to work non-traditional shifts and hours. Experience with general maintenance/ electrical duties preferred. Have general knowledge of conveyors systems, and ability to trouble shoot. Ability to CMMS and good computer skills for utilizing PM Software system. Maintenance experience within a manufacturing/ distribution environment. Want to be notified when new jobs are posted? Follow the link below to create an account and set up custom job alerts: Create Job Alert We want to hear from you! When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products? Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets. Equal Opportunity Employer Ace Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws. Disclaimer The pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual's education, training and experience, the position's work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written "Position Description" is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
08/28/2025
Full time
3rd Shift, 10:55 PM-7:00 AM, Sunday-Thursday Typical starting pay, $38.82/hr., plus $2.00 shift differential What Can We Give You? Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! Maintenance Technician at The Toro Company: This employee is responsible for electrical/electronic systems, equipment and facilities maintenance which include repair/layout or modification of facilities/equipment with an emphasis on CNC machine controls. What Will You Do? Plan and/or perform installation and preventative maintenance/repair on a variety of electrical/mechanical equipment, such as control panels, junction boxes and switches, electronic control equipment, hydraulics, mechanical drives, and other apparatus as associated with machine tools. Diagnose and correct mechanical/electrical/electronic problems using a wide variety of hand/power tools, machine shop equipment and measuring instruments to determine tolerances, fit and wear, rebuilding and adjusting of machines and equipment. Work from electrical, electronic, pneumatic, hydraulic and machine schematic diagrams, drawings and specifications. Replace, adjust, and calibrate components to align: control, machine components, pressure, and other apparatus to required operating specifications. Use oscilloscopes, voltmeter, strip chart records, ammeter, analog converters, amplifiers, and other diagnostic equipment to test circuitry and components. Work closely with outside vendor service technicians, engineers, electricians and millwrights in the repair and installation of new/existing equipment/systems or change-over of plant layout requiring movement of machines, control equipment, and other apparatus. Follow safety rules, producing quality workmanship, and for good housekeeping in work area and areas where maintenance/repair and installations are performed. Complete all associated paperwork and recordkeeping as required. Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company. What Do You Need? High school diploma or equivalent required. Vocational/trade school or equivalent training in the following areas: electrical/electronics, hydraulics, mechanical drives, pneumatics, electro-mechanical principles, machine operations, CNC machine controls or equivalent work experience. Trade knowledge in areas such as plumbing, welding, and mechanical processes. Work Environment: Requires heavy lifting on an occasional basis and working from awkward positions. Frequently exposed to fumes, solvents, grease/oil, noise, working at various heights, etc. The primary hazard involved in this job is that of the possibility of electrical shock. Injuries resulting from inattention or carelessness would usually result in burns, but could possibly be life threatening. Other hazards associated with this position could involve injury to self such as cuts, bruises, or potentially more serious injuries. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees. Required Preferred Job Industries Maintenance & Janitorial
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Electrical Maintenance Technician - Winston-Salem, NC Shift: 3rd shift - 11pm to 7am The Opportunity: As an Electrical Maintenance Technician you will be responsible for supporting the operation of a fast-paced packaging manufacturing facility. The ideal candidate must be able to conduct, maintain, test and repair electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. Must be able to apply knowledge of electrical/mechanical principles in determining equipment malfunctions and restore in all areas of Manufacturing. Primary duties include the install, start up and shut down of equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements; inform appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved and maintain company-required performance and maintenance records for identified equipment. The job also includes performing preventative maintenance functions as directed, assisting maintenance personnel with technical troubleshooting, and performing other duties as required. The ideal candidate will have a strong commitment to working safely and demonstrate the ability to work in a fast-paced environment, possess a strong desire to learn the maintenance of complex machinery, and have a desire to advance within the company. What you need to succeed: High school diploma or equivalent required Minimum of 3 years' electrical maintenance experience in industrial or manufacturing setting Military training and/or technical school preferred , but not required. Computer experience/operation and PLC Programming Must be available to work 3 rd shift. Ability to maintain various manufacturing equipment, follow specific directions, and perform other duties as assigned. Ability to work safely, maintain a clean and safe work environment, and comply with all safety regulations. A thorough knowledge of electrical components and equipment including the use of special instruments for diagnostic purposes What we offer: Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. An attractive salary reflecting skills, competencies and potential; the rate for this position ranging from $23.00 - $30.00 hour with an attractive benefits package plus shift differential for both 2nd and 3rd shift. A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
08/27/2025
Full time
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Electrical Maintenance Technician - Winston-Salem, NC Shift: 3rd shift - 11pm to 7am The Opportunity: As an Electrical Maintenance Technician you will be responsible for supporting the operation of a fast-paced packaging manufacturing facility. The ideal candidate must be able to conduct, maintain, test and repair electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. Must be able to apply knowledge of electrical/mechanical principles in determining equipment malfunctions and restore in all areas of Manufacturing. Primary duties include the install, start up and shut down of equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements; inform appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved and maintain company-required performance and maintenance records for identified equipment. The job also includes performing preventative maintenance functions as directed, assisting maintenance personnel with technical troubleshooting, and performing other duties as required. The ideal candidate will have a strong commitment to working safely and demonstrate the ability to work in a fast-paced environment, possess a strong desire to learn the maintenance of complex machinery, and have a desire to advance within the company. What you need to succeed: High school diploma or equivalent required Minimum of 3 years' electrical maintenance experience in industrial or manufacturing setting Military training and/or technical school preferred , but not required. Computer experience/operation and PLC Programming Must be available to work 3 rd shift. Ability to maintain various manufacturing equipment, follow specific directions, and perform other duties as assigned. Ability to work safely, maintain a clean and safe work environment, and comply with all safety regulations. A thorough knowledge of electrical components and equipment including the use of special instruments for diagnostic purposes What we offer: Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. An attractive salary reflecting skills, competencies and potential; the rate for this position ranging from $23.00 - $30.00 hour with an attractive benefits package plus shift differential for both 2nd and 3rd shift. A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like La Brea Bakery , Otis Spunkmeyer , and Oakrun Farm Bakery . With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers' expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration. The Maintenance Technician III provides complex technical repairs and preventive maintenance on Bakery equipment including mechanical, electrical, pneumatic, hydraulic, and computerized systems to minimize downtime. This role troubleshoots issues, performs repairs, installs new parts, executes equipment overhauls, tests repaired equipment, and maintains records in the computerized maintenance system. Responsibilities: Provides technical repairs to complex electronic, mechanical, and Programmable Logic Controllers (PLCs). Troubleshoots, repairs, fabricates, and/or installs electronic systems, complex gauges, instrumentation repairs, and new parts including mechanical and electronic interfaces Troubleshoots, repairs, adjusts, installs, and programs electronic, electric, and pneumatic controls and instrumentation used to control and measure equipment performance, access to buildings, building automation systems, fire protection systems, material handling systems (elevators, etc.), and energy measurement systems. Assists production workers in diagnosing malfunctions in systems and equipment. Executes major equipment overhauls. Tests equipment after repairs, changeovers, or extended downtime. Maintains production equipment while operating on a defined production schedule. Operates general machinery and tools including saws, drills, power tools, scissor lifts, forklifts, etc. Interacts with and maintains records in accordance with Maintenance Management System requirements and job assignments and communicates via email, all with the use of computer systems Completes duties in accordance with quality assurance, GMPs, safety, and other company programs and procedures, and in compliance with government code and regulations. Maintains clean, organized, and safe work area, including wiping and washing equipment and tools, sweeping and mopping floors, and trash removal. Confers with and coordinates activities with Bakery personnel and other departments to minimize disruptions to production and maintenance schedules. Performs other duties as assigned or required. Qualifications: High school diploma with a minimum of 4 years of experience in instrumentation, measurement, and control systems, electronics, mechanical and/or electrical experience in industrial and manufacturing machinery or 6 years of experience in instrumentation, measurement, and control systems, electronics, mechanical and/or electrical experience in industrial and manufacturing machinery. A Bachelor's degree in Engineering or a related field is preferred. 4 or more years experience in industrial maintenance environment troubleshooting PLC software, I/O, and field devices and working with mechanical, pneumatic, or hydraulic systems preferred Experience in three of the following skills: refrigeration, plumbing, electrical, mechanical, and food manufacturing process controls. Knowledge of equipment set-up, functionality, operating procedures, and preventative maintenance techniques. Able to handle multiple tasks with the capability of prioritizing and planning work activities. Must have the ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation and vendor-supplied documents including Process & Instrument Drawings (PID), electrical single line drawings, instrument loop drawings, electrical cable, routing and termination, mechanical diagrams and machine layout drawings. Must be able to work in a fast-paced environment and must also adapt to frequent changes that occur on the production line. Shift: 3rd shift ( 9:30pm - 5:45am) Aspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
08/20/2025
Full time
Aspire Bakeries is a North American baking company with a leadership position in specialty frozen baked goods. Formed from leading bakery companies, its innovative food portfolio includes breads, artisan breads, buns, cookies, donuts, muffins and pastries from beloved brands like La Brea Bakery , Otis Spunkmeyer , and Oakrun Farm Bakery . With 13 bakeries in North America, we are committed to driving innovation, predicting upcoming consumer trends and flavors, and exceeding our customers' expectations. Aspire Bakeries champions the values of Integrity, Ownership, Customer Focus, Creativity and Care to help us deliver on People Safety, Food Safety, Quality and Collaboration. The Maintenance Technician III provides complex technical repairs and preventive maintenance on Bakery equipment including mechanical, electrical, pneumatic, hydraulic, and computerized systems to minimize downtime. This role troubleshoots issues, performs repairs, installs new parts, executes equipment overhauls, tests repaired equipment, and maintains records in the computerized maintenance system. Responsibilities: Provides technical repairs to complex electronic, mechanical, and Programmable Logic Controllers (PLCs). Troubleshoots, repairs, fabricates, and/or installs electronic systems, complex gauges, instrumentation repairs, and new parts including mechanical and electronic interfaces Troubleshoots, repairs, adjusts, installs, and programs electronic, electric, and pneumatic controls and instrumentation used to control and measure equipment performance, access to buildings, building automation systems, fire protection systems, material handling systems (elevators, etc.), and energy measurement systems. Assists production workers in diagnosing malfunctions in systems and equipment. Executes major equipment overhauls. Tests equipment after repairs, changeovers, or extended downtime. Maintains production equipment while operating on a defined production schedule. Operates general machinery and tools including saws, drills, power tools, scissor lifts, forklifts, etc. Interacts with and maintains records in accordance with Maintenance Management System requirements and job assignments and communicates via email, all with the use of computer systems Completes duties in accordance with quality assurance, GMPs, safety, and other company programs and procedures, and in compliance with government code and regulations. Maintains clean, organized, and safe work area, including wiping and washing equipment and tools, sweeping and mopping floors, and trash removal. Confers with and coordinates activities with Bakery personnel and other departments to minimize disruptions to production and maintenance schedules. Performs other duties as assigned or required. Qualifications: High school diploma with a minimum of 4 years of experience in instrumentation, measurement, and control systems, electronics, mechanical and/or electrical experience in industrial and manufacturing machinery or 6 years of experience in instrumentation, measurement, and control systems, electronics, mechanical and/or electrical experience in industrial and manufacturing machinery. A Bachelor's degree in Engineering or a related field is preferred. 4 or more years experience in industrial maintenance environment troubleshooting PLC software, I/O, and field devices and working with mechanical, pneumatic, or hydraulic systems preferred Experience in three of the following skills: refrigeration, plumbing, electrical, mechanical, and food manufacturing process controls. Knowledge of equipment set-up, functionality, operating procedures, and preventative maintenance techniques. Able to handle multiple tasks with the capability of prioritizing and planning work activities. Must have the ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation and vendor-supplied documents including Process & Instrument Drawings (PID), electrical single line drawings, instrument loop drawings, electrical cable, routing and termination, mechanical diagrams and machine layout drawings. Must be able to work in a fast-paced environment and must also adapt to frequent changes that occur on the production line. Shift: 3rd shift ( 9:30pm - 5:45am) Aspire Bakeries is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: On the 2nd or 3rd shift: Primary duties include providing safe preventative maintenance, installation, service, repair, timely electrical support, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience (preferred), a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How You Will Impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What You Need To succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level. An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives (preferred but not required). PLC trouble shooting and problem solving ability (preferred but not required). Practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits. Some knowledge of the various types of sensors and limit switches. Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime. High school diploma or equivalent Military training and or Technical School preferred. What We Offer: Benefits package that includes pension eligibility, generous 401K match, medical, dental, vision, employee stock purchase plan, wellness program, short-term disability coverage, and more! An attractive salary reflecting skills, competencies, and potential. Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. Referral Program - Get rewarded for referrals: $1250 per hourly employee. A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
08/19/2025
Full time
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: On the 2nd or 3rd shift: Primary duties include providing safe preventative maintenance, installation, service, repair, timely electrical support, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience (preferred), a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How You Will Impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What You Need To succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level. An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives (preferred but not required). PLC trouble shooting and problem solving ability (preferred but not required). Practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits. Some knowledge of the various types of sensors and limit switches. Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime. High school diploma or equivalent Military training and or Technical School preferred. What We Offer: Benefits package that includes pension eligibility, generous 401K match, medical, dental, vision, employee stock purchase plan, wellness program, short-term disability coverage, and more! An attractive salary reflecting skills, competencies, and potential. Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. Referral Program - Get rewarded for referrals: $1250 per hourly employee. A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: On the 2nd or 3rd shift: Primary duties include providing safe preventative maintenance, installation, service, repair, timely electrical support, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience (preferred), a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How You Will Impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What You Need To succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level. An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives (preferred but not required). PLC trouble shooting and problem solving ability (preferred but not required). Practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits. Some knowledge of the various types of sensors and limit switches. Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime. High school diploma or equivalent Military training and or Technical School preferred. What We Offer: Benefits package that includes pension eligibility, generous 401K match, medical, dental, vision, employee stock purchase plan, wellness program, short-term disability coverage, and more! An attractive salary reflecting skills, competencies, and potential. Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. Referral Program - Get rewarded for referrals: $1250 per hourly employee. A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
08/19/2025
Full time
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: On the 2nd or 3rd shift: Primary duties include providing safe preventative maintenance, installation, service, repair, timely electrical support, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience (preferred), a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How You Will Impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What You Need To succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level. An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives (preferred but not required). PLC trouble shooting and problem solving ability (preferred but not required). Practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits. Some knowledge of the various types of sensors and limit switches. Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime. High school diploma or equivalent Military training and or Technical School preferred. What We Offer: Benefits package that includes pension eligibility, generous 401K match, medical, dental, vision, employee stock purchase plan, wellness program, short-term disability coverage, and more! An attractive salary reflecting skills, competencies, and potential. Corporate culture based on integrity, respect, accountability, and excellence. Comprehensive training with numerous learning and development opportunities. Referral Program - Get rewarded for referrals: $1250 per hourly employee. A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
**Aerotek is hiring in Russellville, KY: 3rd Shift Maintenance Technician** We are actively seeking maintenance technicians to join our team in Russellville! Working with us means working with the most reputable companies, and having direct access to the most competitive job opportunities. **Typical Duties Include:** + Perform PM's + Allen Bradley PLC troubleshooting + Work from electrical schematics and mechanical blueprints + Perform electrical high and low voltage work to existing electrical systems, switches, electric motors, fuses, lights, etc. + Maintain & troubleshoot hydraulic & pneumatic systems + Work with high and low voltage + Work with VFD's, servo drives, complex circuits, 480v three phase circuits, & wire control panels + Troubleshoot and repair FANUC robots **Additional Skills & Qualifications:** + 3-5 years maintenance experience or a degree in maintenance with 1-3 years experience + Must be proficient with troubleshooting PLC's + Must have experience with furnaces **Shift Available:** + 3rd shift - 11 PM - 7 AM Monday - Friday **Pay Rate:** $24-$26 with performances raises **Company Benefits and Perks:** + Health, Vision, Dental Benefits Available + 401K with 100% match up to 5% and an additional 2.5% each quarter! + Paid Time Off **About Aerotek:** We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
10/31/2021
Full time
**Aerotek is hiring in Russellville, KY: 3rd Shift Maintenance Technician** We are actively seeking maintenance technicians to join our team in Russellville! Working with us means working with the most reputable companies, and having direct access to the most competitive job opportunities. **Typical Duties Include:** + Perform PM's + Allen Bradley PLC troubleshooting + Work from electrical schematics and mechanical blueprints + Perform electrical high and low voltage work to existing electrical systems, switches, electric motors, fuses, lights, etc. + Maintain & troubleshoot hydraulic & pneumatic systems + Work with high and low voltage + Work with VFD's, servo drives, complex circuits, 480v three phase circuits, & wire control panels + Troubleshoot and repair FANUC robots **Additional Skills & Qualifications:** + 3-5 years maintenance experience or a degree in maintenance with 1-3 years experience + Must be proficient with troubleshooting PLC's + Must have experience with furnaces **Shift Available:** + 3rd shift - 11 PM - 7 AM Monday - Friday **Pay Rate:** $24-$26 with performances raises **Company Benefits and Perks:** + Health, Vision, Dental Benefits Available + 401K with 100% match up to 5% and an additional 2.5% each quarter! + Paid Time Off **About Aerotek:** We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
