Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
11/14/2026
Full time
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
11/14/2026
Full time
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
Job Description Job Description Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations. Responsibilities and Duties 1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications 2. Maintain secondary and/or working calibration standards 3. Perform basic maintenance, troubleshooting and repair of precision equipment 4. Collect, compile, measure, summarize, and record data gathered during calibration 5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. 6. Identify and correct measurement errors, as applicable 7. Prepare calibration reports and certificates 8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used 9. Train subordinates in calibration concepts and procedures 10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers 11. Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Must possess good written and oral, communication skills Basic ability to troubleshoot repair, align and optimize precision equipment Basic computer skills Proficient in use of MS Word and Excel Minimum one year of calibration experience some of which can be offset by formal metrology training Must have very good interpersonal and customer service skills Strong attention to details Must be a self motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
11/14/2026
Full time
Job Description Job Description Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations. Responsibilities and Duties 1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications 2. Maintain secondary and/or working calibration standards 3. Perform basic maintenance, troubleshooting and repair of precision equipment 4. Collect, compile, measure, summarize, and record data gathered during calibration 5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. 6. Identify and correct measurement errors, as applicable 7. Prepare calibration reports and certificates 8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used 9. Train subordinates in calibration concepts and procedures 10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers 11. Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Must possess good written and oral, communication skills Basic ability to troubleshoot repair, align and optimize precision equipment Basic computer skills Proficient in use of MS Word and Excel Minimum one year of calibration experience some of which can be offset by formal metrology training Must have very good interpersonal and customer service skills Strong attention to details Must be a self motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
11/14/2026
Full time
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
11/14/2026
Full time
Job Description Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies : SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.
Job Description Job Description Position Overview The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician Apprentice will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician Apprentice will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods or validate new methods. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, Electrical DC/Low Frequency, Electrical RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications. Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Managers, and customers. Identify and correct measurement errors, as applicable. Prepare calibration reports and certificates. Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned. Qualifications • Basic ability to troubleshoot repair, align and optimize precision equipment. • Must be able to perform general math and algebra functions. • Must have good interpersonal and customer service skills • Knowledge of MS Office applications • Must be a self-starter with innovation, integrity, and attention to detail with the ability to follow written procedures • Ability to work in a fast-paced environment within multiple departments • No previous calibration training required • Minimum High School diploma or equivalent Physical Demands
11/14/2026
Full time
Job Description Job Description Position Overview The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician Apprentice will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician Apprentice will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods or validate new methods. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, Electrical DC/Low Frequency, Electrical RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications. Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Managers, and customers. Identify and correct measurement errors, as applicable. Prepare calibration reports and certificates. Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned. Qualifications • Basic ability to troubleshoot repair, align and optimize precision equipment. • Must be able to perform general math and algebra functions. • Must have good interpersonal and customer service skills • Knowledge of MS Office applications • Must be a self-starter with innovation, integrity, and attention to detail with the ability to follow written procedures • Ability to work in a fast-paced environment within multiple departments • No previous calibration training required • Minimum High School diploma or equivalent Physical Demands