Kroger

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Essential Job Functions: Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures. Perform repairs to systems. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Desired Previous Job Experience/Education: Experience reading engineering drawings, manuals and schematics Supervisory experience Minimum Position Qualifications & Education Requirements: High school diploma or equivalent 35 years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Ability to use control manufacturers software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Essential Job Functions: Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures. Perform repairs to systems. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Desired Previous Job Experience/Education: Experience reading engineering drawings, manuals and schematics Supervisory experience Minimum Position Qualifications & Education Requirements: High school diploma or equivalent 35 years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Ability to use control manufacturers software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary

Position Summary: Assist with refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the companys core values of respect, honesty, integrity, diversity, inclusion and safety.

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Essential Job Functions: Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures. Perform repairs to systems. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Desired Previous Job Experience/Education: Experience reading engineering drawings, manuals and schematics Supervisory experience Minimum Position Qualifications & Education Requirements: High school diploma or equivalent 35 years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Ability to use control manufacturers software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Essential Job Functions: Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures. Perform repairs to systems. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Desired Previous Job Experience/Education: Experience reading engineering drawings, manuals and schematics Supervisory experience Minimum Position Qualifications & Education Requirements: High school diploma or equivalent 35 years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Ability to use control manufacturers software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary

Position Summary: Assist with refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the companys core values of respect, honesty, integrity, diversity, inclusion and safety.

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Essential Job Functions: Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures. Perform repairs to systems. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Desired Previous Job Experience/Education: Experience reading engineering drawings, manuals and schematics Supervisory experience Minimum Position Qualifications & Education Requirements: High school diploma or equivalent 35 years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Ability to use control manufacturers software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary

Position Summary: Assist with refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the companys core values of respect, honesty, integrity, diversity, inclusion and safety.

Position Summary: Assist with refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the companys core values of respect, honesty, integrity, diversity, inclusion and safety.

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Provide general maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures to building and equipment. Troubleshoot issues and repair equipment. Assist in performing component replacement. Navigate and investigate electronic controls interfaces. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Audit registered store equipment identification lists. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Minimum High school diploma or equivalent 35 years proven electrical/mechanical maintenance experience and satisfactory overall performance Ability to use manufacturer interface software Must hold and maintain a valid drivers license Basic knowledge of Microsoft Office Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Desired Experience reading engineering drawings, manuals and schematics EPA Type 2 Certification Supervisory experience

Position Summary: Assist with refrigeration and HVAC maintenance, repair and support to assigned service calls. Demonstrate the companys core values of respect, honesty, integrity, diversity, inclusion and safety.

Position Summary: Oversees service calls for assigned stores for specified zone. Role model and demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety of others. RESPONSIBILITIES Work with lead to develop store maintenance schedule for assigned stores. Maintains and controls inventory for truck stock. Maintains sanitation of work areas as prescribed by established standards. Demonstrate the ability and desire to promote, communicate and implement company initiatives and process improvements to direct reports in a positive manner. Able to tactfully and calmly handle stressful situations and make a positive impression on associates and customers. Be a team player and contribute positively to build team moral. Communicate and interact effectively and amicably with the team including other associates, and supervisors and exercise consideration for others. Must be able to perform the essential functions of the position with or without reasonable accommodation. QUALIFICATIONS Prior experience in the maintenance field or appropriate school training. Basic knowledge of all food service equipment and material handling equipment. Forklift certification required. Ability to travel safely with a valid drivers license and insurance. Effective written and verbal communication skills. Demonstrates ability to make intelligent decisions quickly and solve problems. Basic trouble shooting skills. Some knowledge of Company operations and procedures. Knowledge of computer applications required. Customer service role model. Selfmotivated, able to organize, prioritize, plan and meet deadlines. Must be professional, dependable, possess positive attitude, good judgment, and be able to gain the support of others to get the job done.

Position Summary: Provide equipment, refrigeration and HVAC maintenance, repair and support to assigned service calls. Assist with the development of technicians' knowledge, skills and abilities. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures, including audits. Perform repairs to systems. Maximize optimum performance of equipment by utilizing the applicable instrumentation or data. Navigate and investigate electronic controls interfaces. Assist with and perform various preventive maintenance tasks and procedures to buildings and equipment. Troubleshoot issues and repair equipment. Perform compressor, large motor and component replacement. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Provide input to supervisor and management towards maintenance best practices. Audit registered store equipment identification lists. Assist other skilled trade technicians in repairs as requested. Provide feedback on performance reviews. Coach, mentor and train other technicians. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Ability to work cooperatively in high paced and sometimes stressful environment. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Ability to act with honesty and integrity regarding customer and business information. Ability to follow directions and seek assistance when necessary to resolve customer and business issues. Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Experience reading engineering drawings, manuals and schematics Supervisory experience High school diploma or equivalent 7+ years proven refrigeration/HVAC experience and satisfactory overall performance EPA Type 2 Certification Basic knowledge of Microsoft Office Advanced technical training or related technical certifications Ability to use and instruct others in the use of control manufacturer software Must hold and maintain a valid drivers license Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Demonstrated mentoring and training experience

Provide general maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures to building and equipment. Troubleshoot issues and repair equipment. Assist in performing component replacement. Navigate and investigate electronic controls interfaces. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Audit registered store equipment identification lists. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation. QUALIFICATIONS Minimum High school diploma or equivalent 35 years proven electrical/mechanical maintenance experience and satisfactory overall performance Ability to use manufacturer interface software Must hold and maintain a valid drivers license Basic knowledge of Microsoft Office Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Desired Experience reading engineering drawings, manuals and schematics EPA Type 2 Certification Supervisory experience

Position Summary: Oversees service calls for assigned stores for specified zone. Role model and demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety of others. RESPONSIBILITIES Work with lead to develop store maintenance schedule for assigned stores. Maintains and controls inventory for truck stock. Maintains sanitation of work areas as prescribed by established standards. Demonstrate the ability and desire to promote, communicate and implement company initiatives and process improvements to direct reports in a positive manner. Able to tactfully and calmly handle stressful situations and make a positive impression on associates and customers. Be a team player and contribute positively to build team moral. Communicate and interact effectively and amicably with the team including other associates, and supervisors and exercise consideration for others. Must be able to perform the essential functions of the position with or without reasonable accommodation. QUALIFICATIONS Prior experience in the maintenance field or appropriate school training. Basic knowledge of all food service equipment and material handling equipment. Forklift certification required. Ability to travel safely with a valid drivers license and insurance. Effective written and verbal communication skills. Demonstrates ability to make intelligent decisions quickly and solve problems. Basic trouble shooting skills. Some knowledge of Company operations and procedures. Knowledge of computer applications required. Customer service role model. Selfmotivated, able to organize, prioritize, plan and meet deadlines. Must be professional, dependable, possess positive attitude, good judgment, and be able to gain the support of others to get the job done.