SUMMARY: Overseeing daily production on approximately 50 machines while ensuring overall productivity within the department. General supervision_ _of colleagues including the delegating of responsibilities, scheduling of parts to run and the issuing of job assignments. JOB RESPONSIBILITIES: * Scheduled jobs to be ready for production at the start of each shift. * Responsible for the assignment of operators. * Responsible to ensure proper job set-up. * Ensure that first shot approval is obtained from Quality Inspectors. * Ensure operator acknowledgement sheets are signed by operator and initialed by supervisor. * Ensure all hourly checks of all jobs are being done. * Quick and professional response to operator or quality personnel questions or concerns on part quality. * Record all process changes, correction of a quality issue, on the Job Set-up Sheet and obtain quality technician signature. * Record pertinent shift events in supervisors log. * Make sure equipment not scheduled for upcoming shift is properly shut down. * Assist upcoming shift with job start-up and set-up. * Make sure each operator receives required training. * Work with quality personnel to determine disposition of rejected parts. * Ensure rejected parts that need sorting are sorted at the time they are found on that shift. * If required, responsible to go to our customers' facilities to sort any suspect parts. * Know and follow all IATF-16949 and ISO-14001 policies and procedures. * Adherence to Company Policies and Regulations. * Performs other duties as assigned. REQUIREMENTS * Must have knowledge of a wide range of press sizes, injection molding processes, machines and tools. * Must possess excellent communication skills both verbal and written along with the ability to lead and direct 30 or more subordinates. * Five plus years of hands-on injection molding background in automotive setting. * High school diploma or GED is required.
10/15/2021
Full time
SUMMARY: Overseeing daily production on approximately 50 machines while ensuring overall productivity within the department. General supervision_ _of colleagues including the delegating of responsibilities, scheduling of parts to run and the issuing of job assignments. JOB RESPONSIBILITIES: * Scheduled jobs to be ready for production at the start of each shift. * Responsible for the assignment of operators. * Responsible to ensure proper job set-up. * Ensure that first shot approval is obtained from Quality Inspectors. * Ensure operator acknowledgement sheets are signed by operator and initialed by supervisor. * Ensure all hourly checks of all jobs are being done. * Quick and professional response to operator or quality personnel questions or concerns on part quality. * Record all process changes, correction of a quality issue, on the Job Set-up Sheet and obtain quality technician signature. * Record pertinent shift events in supervisors log. * Make sure equipment not scheduled for upcoming shift is properly shut down. * Assist upcoming shift with job start-up and set-up. * Make sure each operator receives required training. * Work with quality personnel to determine disposition of rejected parts. * Ensure rejected parts that need sorting are sorted at the time they are found on that shift. * If required, responsible to go to our customers' facilities to sort any suspect parts. * Know and follow all IATF-16949 and ISO-14001 policies and procedures. * Adherence to Company Policies and Regulations. * Performs other duties as assigned. REQUIREMENTS * Must have knowledge of a wide range of press sizes, injection molding processes, machines and tools. * Must possess excellent communication skills both verbal and written along with the ability to lead and direct 30 or more subordinates. * Five plus years of hands-on injection molding background in automotive setting. * High school diploma or GED is required.
Start-up, shut down, and troubleshooting of the molding processes during normal production runs. Setting up injection molding machines and all related equipment to allow the manufacture of product that meets or exceeds the established quality levels at the standard rates that have been established. Continuously monitors processes and equipment and communicates any issues to supervisor or quality. JOB RESPONSIBILITIES: * Ready all scheduled machines for production at the start of each shift. * Ensure proper job set-up. * Check that operator acknowledgement sheets are signed by operator and initialed by supervisor or process technician. * Ensure hourly system and quality checks of all operating machines are being done. * Complete Daily Cycle Time Verification Sheets. * Quick and professional response to any operator or quality personnel questions or concerns on part quality. * Record any process changes and correction of any quality issue on the Job Set-up Sheet and obtain quality technician signature. * Assist with or perform required mold changes. * Assist with making sure there are no partial boxes. * Assist with area clean up and have new packaging and material set-up ready for machine set-up. * Assist with all parts packaging making sure material and peripheral equipment for exiting job is put away. * Review any concerns or problems before coming on shift and before leaving shift. * Performs other duties as assigned. REQUIREMENTS * Five years recent experience performing set-up, processing, and troubleshooting of horizontal and vertical plastic injection mold machines in automotive industry; able to addresses processing issues. * Demonstrates knowledge of a wide variety of material variations, quality systems and tools. Strong inspection abilities required to identify part defects, and problem-solving capabilities in understanding root causes of defects. * Excellent communication skills, including verbal and written. * Must be computer literate and familiar with appropriate software programs. * Knowledge of Lean Manufacturing (Kanban, 5s, Std, Work, Problem Solving etc.) * High school diploma or GED is required; two year technical degree would be a plus.
10/15/2021
Full time
Start-up, shut down, and troubleshooting of the molding processes during normal production runs. Setting up injection molding machines and all related equipment to allow the manufacture of product that meets or exceeds the established quality levels at the standard rates that have been established. Continuously monitors processes and equipment and communicates any issues to supervisor or quality. JOB RESPONSIBILITIES: * Ready all scheduled machines for production at the start of each shift. * Ensure proper job set-up. * Check that operator acknowledgement sheets are signed by operator and initialed by supervisor or process technician. * Ensure hourly system and quality checks of all operating machines are being done. * Complete Daily Cycle Time Verification Sheets. * Quick and professional response to any operator or quality personnel questions or concerns on part quality. * Record any process changes and correction of any quality issue on the Job Set-up Sheet and obtain quality technician signature. * Assist with or perform required mold changes. * Assist with making sure there are no partial boxes. * Assist with area clean up and have new packaging and material set-up ready for machine set-up. * Assist with all parts packaging making sure material and peripheral equipment for exiting job is put away. * Review any concerns or problems before coming on shift and before leaving shift. * Performs other duties as assigned. REQUIREMENTS * Five years recent experience performing set-up, processing, and troubleshooting of horizontal and vertical plastic injection mold machines in automotive industry; able to addresses processing issues. * Demonstrates knowledge of a wide variety of material variations, quality systems and tools. Strong inspection abilities required to identify part defects, and problem-solving capabilities in understanding root causes of defects. * Excellent communication skills, including verbal and written. * Must be computer literate and familiar with appropriate software programs. * Knowledge of Lean Manufacturing (Kanban, 5s, Std, Work, Problem Solving etc.) * High school diploma or GED is required; two year technical degree would be a plus.
FUNCTION Our client, a leading manufacturer of industrial rubber goods; including molded rubber gaskets, seals, rubber-to-metal parts, as well as materials expertise, product development and in-house tool design has an opening for a Key Account Manager to manage and expand key customer accounts and to assist the engineering department. RESPONSIBILITIES * Handles all facets of key customer accounts through customer calls and visits. * Grows key customer accounts (e.g., new programs, products). * Ensures customer specific requirements, including but not limited to selection of special characteristics, corrective actions, process design and development, use of customer scorecards and portals as agreed upon are met. * Works with engineering regarding program management for his/her key customers to determine best method of production and generating quotes. * Assists CSR or Outside Sales Representative in expediting orders, quotes, customer concerns, and in collection of overdue invoices when necessary. * Assists in resolving customer concerns and/or corrective actions as necessary for assigned customers. * Negotiate prices within dictated range, air shipments; implements price increases as requested by Global Sales Manager. * Reviews annual contracts and makes proposal on pricing strategies, based on profitability and customer relationships. * Recommends delivery strategies based on insert lead-time constraints. Proposes minimum insert buys based on coverage from customers. * Reviews and signs quotes, for his/her accounts, when Global Sales Manager is unavailable. * Understands and complies with relevant management system requirements as called out on the departmental training plan. REQUIREMENTS * Bachelor's degree from four-year college or university or equivalent combination of education and experience. * Four to five years sales experience in the rubber industry is required. * Must reside in Northeast Ohio area * Open to 50% territory travel * Must be a US Citizen or Green Card holder to be considered for this opportunity.
03/04/2021
Full time
FUNCTION Our client, a leading manufacturer of industrial rubber goods; including molded rubber gaskets, seals, rubber-to-metal parts, as well as materials expertise, product development and in-house tool design has an opening for a Key Account Manager to manage and expand key customer accounts and to assist the engineering department. RESPONSIBILITIES * Handles all facets of key customer accounts through customer calls and visits. * Grows key customer accounts (e.g., new programs, products). * Ensures customer specific requirements, including but not limited to selection of special characteristics, corrective actions, process design and development, use of customer scorecards and portals as agreed upon are met. * Works with engineering regarding program management for his/her key customers to determine best method of production and generating quotes. * Assists CSR or Outside Sales Representative in expediting orders, quotes, customer concerns, and in collection of overdue invoices when necessary. * Assists in resolving customer concerns and/or corrective actions as necessary for assigned customers. * Negotiate prices within dictated range, air shipments; implements price increases as requested by Global Sales Manager. * Reviews annual contracts and makes proposal on pricing strategies, based on profitability and customer relationships. * Recommends delivery strategies based on insert lead-time constraints. Proposes minimum insert buys based on coverage from customers. * Reviews and signs quotes, for his/her accounts, when Global Sales Manager is unavailable. * Understands and complies with relevant management system requirements as called out on the departmental training plan. REQUIREMENTS * Bachelor's degree from four-year college or university or equivalent combination of education and experience. * Four to five years sales experience in the rubber industry is required. * Must reside in Northeast Ohio area * Open to 50% territory travel * Must be a US Citizen or Green Card holder to be considered for this opportunity.