Advanced Molding Technologies, LLC

Compensation: $42.55 to $51.75 per hour (inclusive of $37.00 to $45.00 hourly base plus 15% shift premium for 3rd shift). Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Schedule: 3rd shift (10:00pm - 6:30am Sunday through Thursday) Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Position Summary: The Senior Process Technician serves as a technical expert in injection molding setup, troubleshooting, and process optimization. This position ensures molding processes operate within validated and documented parameters while supporting productivity, quality, and safety objectives in a regulated medical device manufacturing environment. The Senior Process Technician provides advanced technical support, leads troubleshooting efforts, assists with development samples when needed, and mentors Process Technicians I and II. This role requires consistent compliance with ISO 13485, ISO 9001, cGMP, and all company Quality Management System (QMS) procedures. Essential Duties and Responsibilities: Perform and verify setups as needed, including both routine and complex molding setups, ensuring adherence to approved parameters and work instructions. Assist and mentor Process Technician I and II employees during setups and startups, providing guidance and verification to ensure correct procedures are followed. Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Troubleshoot complex molding, tooling, and equipment issues to determine root cause and implement corrective actions or escalate appropriately. Collaborate closely with Engineering, Quality, and Maintenance to resolve process deviations, nonconformances, and equipment-related issues. Review and verify accuracy of Standard Work Instructions (SWIs), Master Process Sheets, and process documentation; coordinate with Engineering or Document Control when corrections or updates are needed. Support development sampling and validation activities as assigned, assisting with setup, documentation, and process adjustments under Engineering or Process Development direction. Apply scientific molding principles and data-driven methods during troubleshooting and process improvement efforts. Ensure all process-related documentation is complete, accurate, and compliant with GDP and QMS standards. Write, review, and track Tooling Work Orders (TWOs) for tooling or process issues requiring maintenance or engineering attention. Verify that all relevant process and maintenance documentation is completed correctly by Process Technicians I and II. Support QMS initiatives including CAPA, NCR investigations, internal audit readiness, and continuous improvement documentation. Participate in or lead small-scale continuous improvement projects to enhance efficiency, product quality, or safety. Partner with Production Supervisors to ensure smooth shift transitions, effective communication, and adherence to production schedules. Demonstrate and enforce proper cleanroom and contamination control procedures in both cleanroom and general production areas. Other duties as assigned Knowledge, Skills, and Abilities: Expert-level understanding of injection molding processes, tooling, materials, and auxiliary equipment. Strong knowledge of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficiency in root-cause analysis and troubleshooting techniques. Ability to interpret process data, setup sheets, validation reports, and engineering drawings. Working knowledge of scientific molding principles, data collection, and process control. Demonstrated leadership, mentoring, and team collaboration skills. Strong attention to detail and accuracy in documentation and communication. Effective cross-functional collaboration with Engineering, Quality, and Production departments. Commitment to workplace safety, product quality, and regulatory compliance. Education and Experience Requirements: High school diploma or equivalent required; associate or technical degree in plastics, manufacturing, or engineering technology preferred. 5 or more years of experience in injection molding, including process setup, troubleshooting, and optimization. Experience in a medical device or other regulated manufacturing environment required. Completion of AIM Molding II required (or obtained within defined timeframe). Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Exposure to moderate heat, noise, and occasional airborne particulates during purging, maintenance, or repair activities. Must remain alert and safety-focused when working around moving machinery, overhead loads, and energized equipment. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 42.55-51.75 Hourly Wage PI6530e72c36c7-3032

Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738

Department: Quality Reports To: Quality Lab Supervisor FLSA Status: Non-Exempt Schedule: 2nd Shit (2:00pm-10:30pm Monday through Friday) Compensation: The hourly pay range for this position is $23.00 to $27.00 with an additional $1.00 shift premium on top of the base for 2nd shift. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: The Quality Inspector I performs inspections and tests on raw materials, components, in-process parts, and finished products to verify conformance to approved company and customer requirements. This position uses established inspection instructions and measuring equipment to identify defects, document results, and communicate quality concerns. Working with Quality and Production personnel, the Quality Inspector I supports product identification, traceability, and control of nonconforming material within AMT's plastic injection molding and medical device component manufacturing environment. Essential Duties and Responsibilities: Inspect raw materials, components, in-process parts, and finished products using approved inspection instructions, specifications, drawings, and acceptance criteria. Perform visual and dimensional inspections and assigned tests using calipers, micrometers, gauges, and semi-automated or automated inspection equipment after appropriate training. Verify that the correct inspection documents, product identification, and equipment are being used; seek guidance when requirements are unclear or inspection results are inconsistent. Check measuring equipment for visible damage and current calibration status, where applicable, before use; report equipment concerns and do not use equipment identified as unsuitable for inspection. Accurately document inspection and test results in required records, reports, and quality databases, including nonconformance information and assigned tracking of rework, scrap, and waste. Review product labeling and packaging against approved requirements; apply inspection stamps, tags, or other status identification in accordance with company procedures and assigned authorization. Identify and report suspected nonconforming material; support labeling, segregation, and documentation to prevent unintended use or shipment while awaiting authorized disposition. Communicate inspection findings promptly to Quality and Production personnel; escalate recurring defects, unclear acceptance decisions, and conditions that may affect product quality. Assist with quality investigations by providing inspection results, examples of defects, and observations; suggest potential causes or improvements for review by responsible personnel. Perform assigned reinspection of reworked or sorted product using approved instructions and document results. Maintain organized inspection areas, protect measuring equipment from damage, and handle parts and materials in a manner that preserves identification and prevents damage or contamination. Follow company policies, approved procedures, and applicable ISO 9001, ISO 13485, and FDA-related requirements in support of the Quality Management System. Perform other duties as assigned within the scope of the position. Knowledge, Skills, and Abilities: Basic to intermediate knowledge of inspection practices, injection molding processes, and quality expectations for medical device components. Basic to intermediate use of calipers, micrometers, gauges, and other basic inspection instruments; ability to learn assigned semi-automated and automated inspection equipment. Ability to read and follow inspection instructions, recognize basic dimensional requirements, and compare results with defined acceptance criteria. Basic math skills sufficient to interpret measurements, compare values with tolerances, and accurately record numerical information. Strong attention to detail and ability to recognize visual defects, inconsistencies, and missing or incorrect information. Ability to maintain accurate, legible, and complete inspection records and preserve product and record traceability. Basic working knowledge of Microsoft Excel, Word, Outlook, and Teams and ability to learn quality databases and ERP functions. Ability to communicate findings clearly, ask questions when requirements are uncertain, and work cooperatively with Quality and Production personnel. Strong organizational skills and ability to complete repetitive inspection tasks consistently while maintaining accuracy. Ability to follow safety, material-handling, and contamination-prevention procedures and demonstrate alignment with AMT's Core Values. Education and Experience Requirements: High school diploma or GED required. 2+ years of recent quality control, quality inspection or quality assurance experience. Previous experience in injection molding or medical device manufacturing preferred. Previous experience using measuring instruments, documenting inspection results, or following manufacturing inspection instructions preferred. Previous experience using ERP systems preferred; experience with IQMS is an advantage. Physical Requirements: Ability to stand and walk for extended periods and occasionally lift, carry, push, or pull objects weighing up to 30 pounds. Sufficient hand-eye coordination and manual dexterity to handle small parts and inspection tools and perform repetitive precision measurements. Vision, with or without corrective lenses, sufficient to inspect small details, read digital and analog displays, and review inspection documents and quality charts; ability to distinguish colors when required by assigned inspections. Ability to move throughout production areas and between buildings and bend, stoop, and reach shelves or inspection locations as needed. Ability to work safely where exposure to chemicals used in manufacturing may occur, following applicable handling, disposal, and exposure-control procedures. Ability to wear required personal protective equipment, including safety glasses, hearing protection, and gloves, for assigned activities and extended periods as needed. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 23-27 Hourly Wage PIc18a02ab6-