Job Description Job Description Conformal Coating Operator Position Summary The Conformal Coating Operator is responsible for operating, monitoring, and supporting automated and semi-automated conformal coating equipment to apply protective coatings to printed circuit boards (PCBs). This role ensures boards are coated accurately, consistently, and in accordance with workmanship standards, customer requirements, and internal procedures. The operator works closely with technicians, leads, and quality personnel to maintain throughput, quality, and process stability. Key ResponsibilitiesMachine Operation & Production Set up, operate, and monitor conformal coating equipment (selective spray, automated systems, or manual-assisted processes). Load and unload PCBAs, ensuring correct orientation, fixturing, and program selection. Start, stop, and adjust machine parameters as directed by work instructions or process documentation. Monitor coating application for proper coverage, thickness, and alignment during production runs. Process Monitoring & Quality Perform in-process inspections using UV light, magnification, or inspection lamps to verify coating quality. Identify coating defects such as skips, bubbles, bridging, overspray, or masking issues. Escalate quality concerns or recurring defects to leads, supervisors, or process engineering. Support minor touch-up or corrective actions as trained and approved. Masking & Board Preparation Apply and remove masking materials per work instructions prior to and after coating. Prepare boards for coating by verifying cleanliness, masking integrity, and traveler accuracy. Assist with demasking and post-coating handling to prevent damage to coated assemblies. Equipment & Material Handling Refill coating materials, solvents, and consumables following safety and handling procedures. Perform routine machine cleaning and basic preventive maintenance tasks. Maintain coating equipment, fixtures, and workstations in a clean and organized condition. Properly label, store, and handle chemicals in accordance with safety and environmental requirements. Documentation & Reporting Accurately complete travelers, production logs, and inspection checklists. Record lot information, machine settings (as required), and any process deviations. Communicate production status, downtime, or issues during shift handoffs. Compliance & Safety Follow all manufacturing instructions, IPC workmanship standards, and ESD control procedures. Adhere to chemical safety, PPE, and environmental regulations. Maintain a clean, organized, and compliant work area at all times. QualificationsPreferred Experience operating manufacturing or automated equipment in an electronics or PCBA environment. Familiarity with conformal coating processes and materials (acrylic, silicone, urethane). Ability to read and follow work instructions, travelers, and process documentation. Basic understanding of IPC-A-610 standards or willingness to obtain certification. Comfortable working with UV inspection tools and precision equipment. Soft Skills Strong attention to detail and process discipline. Ability to work independently and as part of a production team. Clear communication skills and willingness to escalate issues. Dependable, safety-conscious, and quality-focused. Physical Requirements Ability to stand or sit for extended periods. Fine-motor coordination for handling PCBAs and masking materials. Ability to lift up to 20 lbs as required. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, high-tech manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekend availability as needed Pay Range $20-$24 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
07/28/2026
Full time
Job Description Job Description Conformal Coating Operator Position Summary The Conformal Coating Operator is responsible for operating, monitoring, and supporting automated and semi-automated conformal coating equipment to apply protective coatings to printed circuit boards (PCBs). This role ensures boards are coated accurately, consistently, and in accordance with workmanship standards, customer requirements, and internal procedures. The operator works closely with technicians, leads, and quality personnel to maintain throughput, quality, and process stability. Key ResponsibilitiesMachine Operation & Production Set up, operate, and monitor conformal coating equipment (selective spray, automated systems, or manual-assisted processes). Load and unload PCBAs, ensuring correct orientation, fixturing, and program selection. Start, stop, and adjust machine parameters as directed by work instructions or process documentation. Monitor coating application for proper coverage, thickness, and alignment during production runs. Process Monitoring & Quality Perform in-process inspections using UV light, magnification, or inspection lamps to verify coating quality. Identify coating defects such as skips, bubbles, bridging, overspray, or masking issues. Escalate quality concerns or recurring defects to leads, supervisors, or process engineering. Support minor touch-up or corrective actions as trained and approved. Masking & Board Preparation Apply and remove masking materials per work instructions prior to and after coating. Prepare boards for coating by verifying cleanliness, masking integrity, and traveler accuracy. Assist with demasking and post-coating handling to prevent damage to coated assemblies. Equipment & Material Handling Refill coating materials, solvents, and consumables following safety and handling procedures. Perform routine machine cleaning and basic preventive maintenance tasks. Maintain coating equipment, fixtures, and workstations in a clean and organized condition. Properly label, store, and handle chemicals in accordance with safety and environmental requirements. Documentation & Reporting Accurately complete travelers, production logs, and inspection checklists. Record lot information, machine settings (as required), and any process deviations. Communicate production status, downtime, or issues during shift handoffs. Compliance & Safety Follow all manufacturing instructions, IPC workmanship standards, and ESD control procedures. Adhere to chemical safety, PPE, and environmental regulations. Maintain a clean, organized, and compliant work area at all times. QualificationsPreferred Experience operating manufacturing or automated equipment in an electronics or PCBA environment. Familiarity with conformal coating processes and materials (acrylic, silicone, urethane). Ability to read and follow work instructions, travelers, and process documentation. Basic understanding of IPC-A-610 standards or willingness to obtain certification. Comfortable working with UV inspection tools and precision equipment. Soft Skills Strong attention to detail and process discipline. Ability to work independently and as part of a production team. Clear communication skills and willingness to escalate issues. Dependable, safety-conscious, and quality-focused. Physical Requirements Ability to stand or sit for extended periods. Fine-motor coordination for handling PCBAs and masking materials. Ability to lift up to 20 lbs as required. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, high-tech manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekend availability as needed Pay Range $20-$24 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
Job Description Job Description As an SMT Operator at Rocket EMS, you will play a critical role in building high-reliability PCB assemblies by setting up, operating, and monitoring SMT production equipment. You'll run screen printers, SPI, pick-and-place machines, and reflow ovens to ensure every build meets IPC-A-610 Class 2 and 3 workmanship standards. This position requires strong technical aptitude, attention to detail, and the ability to follow precise build documentation in a fast-paced electronics manufacturing environment. Responsibilities Review build documentation such as MPIs, assembly drawings, ECOs, BOMs, and customer requirements before beginning work. Set up and operate SMT equipment including: Screen printers Solder paste inspection (SPI) systems Pick-and-place machines (Fuji, Panasonic, Juki, etc.) Reflow ovens Verify feeder setups, component orientation, reference designators, and correct loadouts according to the BOM. Perform machine program loading, verification, and first-article checks as required. Monitor machine performance, address mis-picks, placement errors, and stoppages promptly, and escalate recurring issues to the Lead, Engineer, or Supervisor. Conduct visual and AOI pre-verification to ensure solder paste deposits, component placements, and reflow results meet IPC-A-610 standards. Perform basic machine maintenance, cleaning, and calibration tasks according to established procedures. Assist in first article builds, ensuring accuracy of placements, polarity, and component values. Identify and correct SMT-related defects; escalate systemic issues to Engineering or Quality. Maintain clean, organized work areas and follow all ESD, MSD, and handling procedures. Record production data, downtime events, and pass-down information accurately. Support other areas of production-such as AOI, rework, or kit prep-as directed by Supervisor, Engineer, or Manager. Participate in continuous improvement initiatives and 5S activities to improve efficiency and quality. Qualifications Education High school diploma or equivalent (required) Experience Minimum 1-2 years of SMT production experience in contract manufacturing or electronics assembly (preferred). Experience operating pick-and-place machines, SPI, and reflow ovens (preferred). IPC-A-610 certification (preferred or required depending on role level). Skills Ability to read assembly drawings, MPIs, ECOs, and BOMs. Strong understanding of component identification, polarity, and package types (0402, 0201, ICs, BGAs, QFNs, etc.). Knowledge of solder paste application and reflow profiles. Mechanical aptitude for troubleshooting minor machine issues. Excellent attention to detail and commitment to high-quality workmanship. Basic computer skills (Excel, Word, Outlook). Clear written and verbal communication skills in English. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, technology-driven manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed Pay Range $20-$23 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
07/28/2026
Full time
Job Description Job Description As an SMT Operator at Rocket EMS, you will play a critical role in building high-reliability PCB assemblies by setting up, operating, and monitoring SMT production equipment. You'll run screen printers, SPI, pick-and-place machines, and reflow ovens to ensure every build meets IPC-A-610 Class 2 and 3 workmanship standards. This position requires strong technical aptitude, attention to detail, and the ability to follow precise build documentation in a fast-paced electronics manufacturing environment. Responsibilities Review build documentation such as MPIs, assembly drawings, ECOs, BOMs, and customer requirements before beginning work. Set up and operate SMT equipment including: Screen printers Solder paste inspection (SPI) systems Pick-and-place machines (Fuji, Panasonic, Juki, etc.) Reflow ovens Verify feeder setups, component orientation, reference designators, and correct loadouts according to the BOM. Perform machine program loading, verification, and first-article checks as required. Monitor machine performance, address mis-picks, placement errors, and stoppages promptly, and escalate recurring issues to the Lead, Engineer, or Supervisor. Conduct visual and AOI pre-verification to ensure solder paste deposits, component placements, and reflow results meet IPC-A-610 standards. Perform basic machine maintenance, cleaning, and calibration tasks according to established procedures. Assist in first article builds, ensuring accuracy of placements, polarity, and component values. Identify and correct SMT-related defects; escalate systemic issues to Engineering or Quality. Maintain clean, organized work areas and follow all ESD, MSD, and handling procedures. Record production data, downtime events, and pass-down information accurately. Support other areas of production-such as AOI, rework, or kit prep-as directed by Supervisor, Engineer, or Manager. Participate in continuous improvement initiatives and 5S activities to improve efficiency and quality. Qualifications Education High school diploma or equivalent (required) Experience Minimum 1-2 years of SMT production experience in contract manufacturing or electronics assembly (preferred). Experience operating pick-and-place machines, SPI, and reflow ovens (preferred). IPC-A-610 certification (preferred or required depending on role level). Skills Ability to read assembly drawings, MPIs, ECOs, and BOMs. Strong understanding of component identification, polarity, and package types (0402, 0201, ICs, BGAs, QFNs, etc.). Knowledge of solder paste application and reflow profiles. Mechanical aptitude for troubleshooting minor machine issues. Excellent attention to detail and commitment to high-quality workmanship. Basic computer skills (Excel, Word, Outlook). Clear written and verbal communication skills in English. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, technology-driven manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed Pay Range $20-$23 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
Job Description Job Description AOI / AXI OperatorAbout the Role As an AOI / AXI Operator at Rocket EMS, you will play a critical role in maintaining product quality across our SMT production lines. You'll operate Automated Optical Inspection (AOI) and Automated X-ray Inspection (AXI) systems to identify defects, verify workmanship, and ensure PCB assemblies meet IPC and customer requirements. This position requires strong attention to detail, sound judgment, and close collaboration with Quality, Engineering, and Production teams. Responsibilities Operate AOI and AXI inspection equipment to inspect PCB assemblies for component placement, polarity, solder defects, and workmanship issues. Review and understand job documentation, including MPIs, ECOs, deviations, and customer specifications, prior to inspection. Perform first article and in-process inspections to verify compliance with IPC-A-610 Class 2 and Class 3 standards. Analyze inspection results, classify defects, and accurately document findings. Escalate critical or recurring defects immediately; stop production when quality is at risk and notify appropriate personnel. Communicate inspection results and quality trends during daily pass-downs to leads and supervisors. Support defect verification and root-cause analysis in partnership with Engineering and Rework teams. Ensure inspection equipment is properly set up, maintained, and kept clean for consistent performance. Adhere to and enforce ESD, MSD, safety, housekeeping, and inspection procedures at all times. Assist in continuous improvement efforts by identifying process issues, false calls, and opportunities to improve inspection efficiency. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years of experience in AOI, AXI, or SMT inspection within an electronics manufacturing environment preferred. Experience in contract manufacturing or high-reliability production is a plus. IPC-A-610 and/or J-STD-001 certification (preferred). Skills Strong knowledge of IPC-A-610 Class 2 and Class 3 workmanship standards. Ability to interpret inspection images, drawings, and BOMs. Proficient with basic computer applications (MS Word, Excel, Outlook). Strong verbal and written communication skills. Highly detail-oriented with the ability to accurately identify, classify, and document defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Opportunities for growth in a high-reliability electronics manufacturing environment Schedule 8-hour shifts, Monday-Friday Overtime and weekend work as required Pay Range $22-$26 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
07/28/2026
Full time
Job Description Job Description AOI / AXI OperatorAbout the Role As an AOI / AXI Operator at Rocket EMS, you will play a critical role in maintaining product quality across our SMT production lines. You'll operate Automated Optical Inspection (AOI) and Automated X-ray Inspection (AXI) systems to identify defects, verify workmanship, and ensure PCB assemblies meet IPC and customer requirements. This position requires strong attention to detail, sound judgment, and close collaboration with Quality, Engineering, and Production teams. Responsibilities Operate AOI and AXI inspection equipment to inspect PCB assemblies for component placement, polarity, solder defects, and workmanship issues. Review and understand job documentation, including MPIs, ECOs, deviations, and customer specifications, prior to inspection. Perform first article and in-process inspections to verify compliance with IPC-A-610 Class 2 and Class 3 standards. Analyze inspection results, classify defects, and accurately document findings. Escalate critical or recurring defects immediately; stop production when quality is at risk and notify appropriate personnel. Communicate inspection results and quality trends during daily pass-downs to leads and supervisors. Support defect verification and root-cause analysis in partnership with Engineering and Rework teams. Ensure inspection equipment is properly set up, maintained, and kept clean for consistent performance. Adhere to and enforce ESD, MSD, safety, housekeeping, and inspection procedures at all times. Assist in continuous improvement efforts by identifying process issues, false calls, and opportunities to improve inspection efficiency. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years of experience in AOI, AXI, or SMT inspection within an electronics manufacturing environment preferred. Experience in contract manufacturing or high-reliability production is a plus. IPC-A-610 and/or J-STD-001 certification (preferred). Skills Strong knowledge of IPC-A-610 Class 2 and Class 3 workmanship standards. Ability to interpret inspection images, drawings, and BOMs. Proficient with basic computer applications (MS Word, Excel, Outlook). Strong verbal and written communication skills. Highly detail-oriented with the ability to accurately identify, classify, and document defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Opportunities for growth in a high-reliability electronics manufacturing environment Schedule 8-hour shifts, Monday-Friday Overtime and weekend work as required Pay Range $22-$26 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
Job Description Job Description Position Summary The Through-Hole Assembly Operator is responsible for assembling electronic components onto printed circuit board assemblies (PCBAs) using manual insertion techniques. This role requires attention to detail, the ability to follow assembly documentation, and adherence to quality and workmanship standards to ensure reliable electronic products. The operator will work closely with Manufacturing and Quality teams to ensure assemblies meet production requirements and customer specifications. Essential Duties and Responsibilities • Perform manual insertion of through-hole electronic components into printed circuit boards according to assembly documentation • Follow work instructions, assembly drawings, and bills of material (BOMs) • Identify correct component types, polarity, and orientation prior to insertion • Prepare assemblies for wave solder or selective solder processes • Perform lead forming, trimming, and component preparation as required • Inspect work to ensure compliance with workmanship standards • Maintain ESD compliance and proper handling procedures for electronic components • Report component shortages, defects, or process issues to supervisors or engineering • Maintain a clean and organized workstation in accordance with manufacturing standards • Support production goals by maintaining quality and throughput requirements Required Skills and Qualifications • Ability to follow assembly instructions and documentation • Strong attention to detail and manual dexterity • Ability to identify component polarity and orientation • Basic understanding of electronic components and PCB assemblies • Ability to work in a fast-paced manufacturing environment • Good communication and teamwork skills Preferred Qualifications • Experience working in electronics manufacturing or PCBA assembly • Familiarity with through-hole component insertion and lead forming • Knowledge of ESD handling practices • Certification or familiarity with IPC-A-610 Physical Requirements • Ability to sit or stand for extended periods • Ability to perform repetitive hand movements • Ability to lift up to 25 lbs occasionally Work Environment This position operates in an electronics manufacturing environment and requires adherence to ESD and safety protocols . Pay Range $24-$26 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
07/28/2026
Full time
Job Description Job Description Position Summary The Through-Hole Assembly Operator is responsible for assembling electronic components onto printed circuit board assemblies (PCBAs) using manual insertion techniques. This role requires attention to detail, the ability to follow assembly documentation, and adherence to quality and workmanship standards to ensure reliable electronic products. The operator will work closely with Manufacturing and Quality teams to ensure assemblies meet production requirements and customer specifications. Essential Duties and Responsibilities • Perform manual insertion of through-hole electronic components into printed circuit boards according to assembly documentation • Follow work instructions, assembly drawings, and bills of material (BOMs) • Identify correct component types, polarity, and orientation prior to insertion • Prepare assemblies for wave solder or selective solder processes • Perform lead forming, trimming, and component preparation as required • Inspect work to ensure compliance with workmanship standards • Maintain ESD compliance and proper handling procedures for electronic components • Report component shortages, defects, or process issues to supervisors or engineering • Maintain a clean and organized workstation in accordance with manufacturing standards • Support production goals by maintaining quality and throughput requirements Required Skills and Qualifications • Ability to follow assembly instructions and documentation • Strong attention to detail and manual dexterity • Ability to identify component polarity and orientation • Basic understanding of electronic components and PCB assemblies • Ability to work in a fast-paced manufacturing environment • Good communication and teamwork skills Preferred Qualifications • Experience working in electronics manufacturing or PCBA assembly • Familiarity with through-hole component insertion and lead forming • Knowledge of ESD handling practices • Certification or familiarity with IPC-A-610 Physical Requirements • Ability to sit or stand for extended periods • Ability to perform repetitive hand movements • Ability to lift up to 25 lbs occasionally Work Environment This position operates in an electronics manufacturing environment and requires adherence to ESD and safety protocols . Pay Range $24-$26 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
Job Description Job Description Conformal Coating Operator Position Summary The Conformal Coating Operator is responsible for operating, monitoring, and supporting automated and semi-automated conformal coating equipment to apply protective coatings to printed circuit boards (PCBs). This role ensures boards are coated accurately, consistently, and in accordance with workmanship standards, customer requirements, and internal procedures. The operator works closely with technicians, leads, and quality personnel to maintain throughput, quality, and process stability. Key ResponsibilitiesMachine Operation & Production Set up, operate, and monitor conformal coating equipment (selective spray, automated systems, or manual-assisted processes). Load and unload PCBAs, ensuring correct orientation, fixturing, and program selection. Start, stop, and adjust machine parameters as directed by work instructions or process documentation. Monitor coating application for proper coverage, thickness, and alignment during production runs. Process Monitoring & Quality Perform in-process inspections using UV light, magnification, or inspection lamps to verify coating quality. Identify coating defects such as skips, bubbles, bridging, overspray, or masking issues. Escalate quality concerns or recurring defects to leads, supervisors, or process engineering. Support minor touch-up or corrective actions as trained and approved. Masking & Board Preparation Apply and remove masking materials per work instructions prior to and after coating. Prepare boards for coating by verifying cleanliness, masking integrity, and traveler accuracy. Assist with demasking and post-coating handling to prevent damage to coated assemblies. Equipment & Material Handling Refill coating materials, solvents, and consumables following safety and handling procedures. Perform routine machine cleaning and basic preventive maintenance tasks. Maintain coating equipment, fixtures, and workstations in a clean and organized condition. Properly label, store, and handle chemicals in accordance with safety and environmental requirements. Documentation & Reporting Accurately complete travelers, production logs, and inspection checklists. Record lot information, machine settings (as required), and any process deviations. Communicate production status, downtime, or issues during shift handoffs. Compliance & Safety Follow all manufacturing instructions, IPC workmanship standards, and ESD control procedures. Adhere to chemical safety, PPE, and environmental regulations. Maintain a clean, organized, and compliant work area at all times. QualificationsPreferred Experience operating manufacturing or automated equipment in an electronics or PCBA environment. Familiarity with conformal coating processes and materials (acrylic, silicone, urethane). Ability to read and follow work instructions, travelers, and process documentation. Basic understanding of IPC-A-610 standards or willingness to obtain certification. Comfortable working with UV inspection tools and precision equipment. Soft Skills Strong attention to detail and process discipline. Ability to work independently and as part of a production team. Clear communication skills and willingness to escalate issues. Dependable, safety-conscious, and quality-focused. Physical Requirements Ability to stand or sit for extended periods. Fine-motor coordination for handling PCBAs and masking materials. Ability to lift up to 20 lbs as required. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, high-tech manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekend availability as needed Pay Range $20-$24 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.
07/28/2026
Full time
Job Description Job Description Conformal Coating Operator Position Summary The Conformal Coating Operator is responsible for operating, monitoring, and supporting automated and semi-automated conformal coating equipment to apply protective coatings to printed circuit boards (PCBs). This role ensures boards are coated accurately, consistently, and in accordance with workmanship standards, customer requirements, and internal procedures. The operator works closely with technicians, leads, and quality personnel to maintain throughput, quality, and process stability. Key ResponsibilitiesMachine Operation & Production Set up, operate, and monitor conformal coating equipment (selective spray, automated systems, or manual-assisted processes). Load and unload PCBAs, ensuring correct orientation, fixturing, and program selection. Start, stop, and adjust machine parameters as directed by work instructions or process documentation. Monitor coating application for proper coverage, thickness, and alignment during production runs. Process Monitoring & Quality Perform in-process inspections using UV light, magnification, or inspection lamps to verify coating quality. Identify coating defects such as skips, bubbles, bridging, overspray, or masking issues. Escalate quality concerns or recurring defects to leads, supervisors, or process engineering. Support minor touch-up or corrective actions as trained and approved. Masking & Board Preparation Apply and remove masking materials per work instructions prior to and after coating. Prepare boards for coating by verifying cleanliness, masking integrity, and traveler accuracy. Assist with demasking and post-coating handling to prevent damage to coated assemblies. Equipment & Material Handling Refill coating materials, solvents, and consumables following safety and handling procedures. Perform routine machine cleaning and basic preventive maintenance tasks. Maintain coating equipment, fixtures, and workstations in a clean and organized condition. Properly label, store, and handle chemicals in accordance with safety and environmental requirements. Documentation & Reporting Accurately complete travelers, production logs, and inspection checklists. Record lot information, machine settings (as required), and any process deviations. Communicate production status, downtime, or issues during shift handoffs. Compliance & Safety Follow all manufacturing instructions, IPC workmanship standards, and ESD control procedures. Adhere to chemical safety, PPE, and environmental regulations. Maintain a clean, organized, and compliant work area at all times. QualificationsPreferred Experience operating manufacturing or automated equipment in an electronics or PCBA environment. Familiarity with conformal coating processes and materials (acrylic, silicone, urethane). Ability to read and follow work instructions, travelers, and process documentation. Basic understanding of IPC-A-610 standards or willingness to obtain certification. Comfortable working with UV inspection tools and precision equipment. Soft Skills Strong attention to detail and process discipline. Ability to work independently and as part of a production team. Clear communication skills and willingness to escalate issues. Dependable, safety-conscious, and quality-focused. Physical Requirements Ability to stand or sit for extended periods. Fine-motor coordination for handling PCBAs and masking materials. Ability to lift up to 20 lbs as required. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off and company holidays Opportunities for advancement in a growing, high-tech manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekend availability as needed Pay Range $20-$24 USD Rocket EMS will consider qualified applicants with criminal histories in a manner consistent with the California Fair Chance Act. Candidates are not required to disclose criminal history or participate in a background check unless and until a conditional offer of employment has been made. Any final offer of employment may be conditioned on completion of a background check, consistent with applicable law.