Description: Certified Welding Inspector (1st Shift, Full-Time) $27.00-$34.00/hour Schedule: Monday-Friday, 6:30am-2:30pm POSITION SUMMARY: Under the direction of the CWI supervisor, the Certified Welding Inspector (CWI) carries out tasks as part of the Weld team in support of JARP Operations and JARP Engineering. Frequent and direct interaction with interested parties such as JARP employees and suppliers is required, along with communication across the business. The CWI will support the Operations and Engineering teams in producing quality results by auditing welding standards, procedures, instructions, prints and equipment, providing monitoring, measurement and analysis services of weld operations and processes, and assisting in driving improvement methodologies related to weld across the business. Mentoring and training of new employees. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Auditing standards, specifications, techniques, processes, procedures, instructions, forms and other documents related to JARP's welding processes. 2. Support Operations in the day-to-day verification and visual inspection (VT) of welded products and of welding processes, to ensure ongoing compliance with all federal, state, and industry welding regulations. 3. Support Engineering in the understanding of customer requirements relating to weld, and in the evaluation of usual, unusual or otherwise complex materials, heating requirements or other material science related to product performance and functionality. 4. Assist in the creation of, or prepare, technical reports related to welding as required. 5. Day-to-day support in the investigation of JARP customer complaints when required. 6. Support of Root Cause Analysis for instances of nonconformance with products and services involving welded components. 7. Assist with returned / nonconforming product and material as part of JARP's Warranty Evaluation process as required. 8. Tactical responsibility for following JARP's internal Quality Management System (QMS) audit program as a member of the Quality team, with specific focus on weld processes and documentation. 9. Work with shop welding team with Continuous Improvement (CI) projects. 10. Help Identify nonconformities such as repeat weld related issues with orientation, weld leaks, weld quality. 11. Perform random weld audits, verify processes are followed, as well as personnel qualifications 12. Identify the need for jigs and fixtures. 13. Knowledge of PQR/ WPS welder qualification to AWS D1.1 14. Maintains basic welding equipment. Schedule maintenance with welding equipment failures, verify calibration of welding equipment. 15. Verifying welding consumables shelf life. Requirements: EDUCATION AND EXPERIENCE: 1. 2 years minimum cumulative experience in similar or related roles, preferably within a manufacturing or engineering environment (e.g. CWI, Welder, robotic welding etc.). 2. Experience in the mentoring and training of individuals and small groups is required. LICENCES AND CERTIFICATIONS: American Welding Society (AWS) - Certified Welding Inspector (CWI) credentials and up to date. Further areas of study that would be desirable are: 1. ASME endorsement 2. Military welding code Navsea etc 3. Certified Process Analyst 4. Six Sigma (Yellow / Green belt) Other certifications held by the individual will be reviewed for suitability towards successfully performing the role. QUALIFICATIONS AND SKILLS: 1. Excellent technical drawing and blueprint interpretation skills. 2. Knowledge of PQR/ WPS to AWS D1.1 3. Working knowledge of NDT/ NDE techniques. 4. Good strategic abilities - can understand situations quickly and carry out suitable measures and countermeasures. 5. Strong team working abilities; will not dismiss or rebuff others and can demonstrate the capability to agree or disagree constructively when necessary. 6. Good negotiation skills and the ability to resolve issues by identifying effective courses of action. 7. Goal-oriented, with the ability to self-prioritize effectively. 8. First class communication skills, with the ability to interact appropriately with all levels of the business. 9. Excellent writing, reading, oral and technical presentation skills. 10. Excellent computer literacy, including the ability to adapt quickly to new software, technology and similar. What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI9b600b6a4d51-2665
07/10/2026
Full time
Description: Certified Welding Inspector (1st Shift, Full-Time) $27.00-$34.00/hour Schedule: Monday-Friday, 6:30am-2:30pm POSITION SUMMARY: Under the direction of the CWI supervisor, the Certified Welding Inspector (CWI) carries out tasks as part of the Weld team in support of JARP Operations and JARP Engineering. Frequent and direct interaction with interested parties such as JARP employees and suppliers is required, along with communication across the business. The CWI will support the Operations and Engineering teams in producing quality results by auditing welding standards, procedures, instructions, prints and equipment, providing monitoring, measurement and analysis services of weld operations and processes, and assisting in driving improvement methodologies related to weld across the business. Mentoring and training of new employees. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Auditing standards, specifications, techniques, processes, procedures, instructions, forms and other documents related to JARP's welding processes. 2. Support Operations in the day-to-day verification and visual inspection (VT) of welded products and of welding processes, to ensure ongoing compliance with all federal, state, and industry welding regulations. 3. Support Engineering in the understanding of customer requirements relating to weld, and in the evaluation of usual, unusual or otherwise complex materials, heating requirements or other material science related to product performance and functionality. 4. Assist in the creation of, or prepare, technical reports related to welding as required. 5. Day-to-day support in the investigation of JARP customer complaints when required. 6. Support of Root Cause Analysis for instances of nonconformance with products and services involving welded components. 7. Assist with returned / nonconforming product and material as part of JARP's Warranty Evaluation process as required. 8. Tactical responsibility for following JARP's internal Quality Management System (QMS) audit program as a member of the Quality team, with specific focus on weld processes and documentation. 9. Work with shop welding team with Continuous Improvement (CI) projects. 10. Help Identify nonconformities such as repeat weld related issues with orientation, weld leaks, weld quality. 11. Perform random weld audits, verify processes are followed, as well as personnel qualifications 12. Identify the need for jigs and fixtures. 13. Knowledge of PQR/ WPS welder qualification to AWS D1.1 14. Maintains basic welding equipment. Schedule maintenance with welding equipment failures, verify calibration of welding equipment. 15. Verifying welding consumables shelf life. Requirements: EDUCATION AND EXPERIENCE: 1. 2 years minimum cumulative experience in similar or related roles, preferably within a manufacturing or engineering environment (e.g. CWI, Welder, robotic welding etc.). 2. Experience in the mentoring and training of individuals and small groups is required. LICENCES AND CERTIFICATIONS: American Welding Society (AWS) - Certified Welding Inspector (CWI) credentials and up to date. Further areas of study that would be desirable are: 1. ASME endorsement 2. Military welding code Navsea etc 3. Certified Process Analyst 4. Six Sigma (Yellow / Green belt) Other certifications held by the individual will be reviewed for suitability towards successfully performing the role. QUALIFICATIONS AND SKILLS: 1. Excellent technical drawing and blueprint interpretation skills. 2. Knowledge of PQR/ WPS to AWS D1.1 3. Working knowledge of NDT/ NDE techniques. 4. Good strategic abilities - can understand situations quickly and carry out suitable measures and countermeasures. 5. Strong team working abilities; will not dismiss or rebuff others and can demonstrate the capability to agree or disagree constructively when necessary. 6. Good negotiation skills and the ability to resolve issues by identifying effective courses of action. 7. Goal-oriented, with the ability to self-prioritize effectively. 8. First class communication skills, with the ability to interact appropriately with all levels of the business. 9. Excellent writing, reading, oral and technical presentation skills. 10. Excellent computer literacy, including the ability to adapt quickly to new software, technology and similar. What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI9b600b6a4d51-2665
Description: POSITION SUMMARY: Under the direction of the General Manager, the Controller is responsible for all general ledger accounting functions, budgeting and forecasting, oversight of capital expenditures and risk management. Please note that this role is onsite only and does not offer remote or hybrid options. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Responsible for ensuring cash, invoicing, budget vs actual, and payroll reporting is completed as required 2. Manage the budgeting and forecasting processes 3. Provide oversight of capital expenditures 4. Provide oversight, completion and reporting of cash collections, including credit authorization 5. Responsible for cash flow reporting 6. Responsible for oversight and completion of month end reporting 7. Responsible for financial reporting 8. Responsible for oversight of A/R and A/P processing 9. Perform year-end preparation and processing for annual financial audit and R&D tax credit 10. Responsible for weekly/monthly/annual reporting and information processing for management reports 11. Provide oversight and maintenance of internal controls 12. Responsible for risk management Requirements: EDUCATION AND EXPERIENCE: 1. Bachelor's degree in accounting or finance 2. Minimum of 10 years' experience in an accounting position 3. Experience with cost accounting, financial reporting and internal controls 4. Manufacturing knowledge and experience required What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PIab40ed3dfad9-2763
07/09/2026
Full time
Description: POSITION SUMMARY: Under the direction of the General Manager, the Controller is responsible for all general ledger accounting functions, budgeting and forecasting, oversight of capital expenditures and risk management. Please note that this role is onsite only and does not offer remote or hybrid options. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Responsible for ensuring cash, invoicing, budget vs actual, and payroll reporting is completed as required 2. Manage the budgeting and forecasting processes 3. Provide oversight of capital expenditures 4. Provide oversight, completion and reporting of cash collections, including credit authorization 5. Responsible for cash flow reporting 6. Responsible for oversight and completion of month end reporting 7. Responsible for financial reporting 8. Responsible for oversight of A/R and A/P processing 9. Perform year-end preparation and processing for annual financial audit and R&D tax credit 10. Responsible for weekly/monthly/annual reporting and information processing for management reports 11. Provide oversight and maintenance of internal controls 12. Responsible for risk management Requirements: EDUCATION AND EXPERIENCE: 1. Bachelor's degree in accounting or finance 2. Minimum of 10 years' experience in an accounting position 3. Experience with cost accounting, financial reporting and internal controls 4. Manufacturing knowledge and experience required What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PIab40ed3dfad9-2763
Job Description Job Description Description: POSITION SUMMARY: Under the direction of the General Manager, the Controller is responsible for all general ledger accounting functions, budgeting and forecasting, oversight of capital expenditures and risk management. Please note that this role is onsite only and does not offer remote or hybrid options. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Responsible for ensuring cash, invoicing, budget vs actual, and payroll reporting is completed as required 2. Manage the budgeting and forecasting processes 3. Provide oversight of capital expenditures 4. Provide oversight, completion and reporting of cash collections, including credit authorization 5. Responsible for cash flow reporting 6. Responsible for oversight and completion of month end reporting 7. Responsible for financial reporting 8. Responsible for oversight of A/R and A/P processing 9. Perform year-end preparation and processing for annual financial audit and R&D tax credit 10. Responsible for weekly/monthly/annual reporting and information processing for management reports 11. Provide oversight and maintenance of internal controls 12. Responsible for risk management Requirements: EDUCATION AND EXPERIENCE: 1. Bachelor's degree in accounting or finance 2. Minimum of 10 years' experience in an accounting position 3. Experience with cost accounting, financial reporting and internal controls 4. Manufacturing knowledge and experience required What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI1f6bf9082f84-2763
07/05/2026
Full time
Job Description Job Description Description: POSITION SUMMARY: Under the direction of the General Manager, the Controller is responsible for all general ledger accounting functions, budgeting and forecasting, oversight of capital expenditures and risk management. Please note that this role is onsite only and does not offer remote or hybrid options. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Responsible for ensuring cash, invoicing, budget vs actual, and payroll reporting is completed as required 2. Manage the budgeting and forecasting processes 3. Provide oversight of capital expenditures 4. Provide oversight, completion and reporting of cash collections, including credit authorization 5. Responsible for cash flow reporting 6. Responsible for oversight and completion of month end reporting 7. Responsible for financial reporting 8. Responsible for oversight of A/R and A/P processing 9. Perform year-end preparation and processing for annual financial audit and R&D tax credit 10. Responsible for weekly/monthly/annual reporting and information processing for management reports 11. Provide oversight and maintenance of internal controls 12. Responsible for risk management Requirements: EDUCATION AND EXPERIENCE: 1. Bachelor's degree in accounting or finance 2. Minimum of 10 years' experience in an accounting position 3. Experience with cost accounting, financial reporting and internal controls 4. Manufacturing knowledge and experience required What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI1f6bf9082f84-2763
Description: CNC Machinist (1st shift, Full-Time) Location: JARP RE $23.00 - $40.00/hour Schedule: Monday - Friday, 6:30am - 2:30pm POSITION SUMMARY: Under the direction of the Team Lead or Plant Management Team, the experienced CNC Machinist is responsible for evaluation of the hydraulic cylinders and/or components, identify those that can be repaired or re-used, clean, polish, hone, assemble and test those cylinders that can be. The experienced CNC machinist is also responsible for setting up and running the equipment per the appropriate work instructions. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Conduct inspection of parts during "run" per the work instruction and maintain part specification. 2. Responsible for maintaining tooling/inserts. 3. Conduct daily/weekly maintenance inspections of equipment and record. 4. May operate other equipment/machines as directed by supervision. 5. Must maintain flexibility as job or machining priorities change day to day. 6. Review the priority list, drain, blast or process to build in priority order. 7. Identify all parts as good or repairable and direct to proper location. 8. Wash/clean product as required. 9. Use prints and/or standard practices for proper assembly of the required components. 10. Review the work instruction, print and "J"/customer specifications for proper assembly techniques. 11. Set up and use torquer and nut-buster for assembly or disassembly of product. 12. Set-up the appropriate test stand to properly test assembled product when trained. 13. Conduct final testing and record on the correct "test log" when properly trained. 14. Maintain identification of all components during the assembly process. Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. MARGINAL RESPONSIBILITIES: 1. Help keep the area clean and neat (practice housekeeping). 2. Assist with the development of more efficient manufacturing methods and procedures. 3. Check machine coolant/concentration levels and service as needed. 4. May be directed to perform other tasks due to a decrease in the work load, machine being down for maintenance or a critical need exists in another area. 5. Must be open-minded to various product designs. 6. Must be able to stay on the "task" due to the manual environment. Requirements: EDUCATION AND EXPERIENCE: 1. High school diploma or equivalent 2. Two-year Associates Degree in Machine Tool techniques with one year of on-the-job CNC Machinist experience required 3. With no applicable degree, minimum of three years of on-the-job CNC Machinist experience required QUALIFICATIONS AND SKILLS: 1. Must be able to read and understand blue prints 2. Set up and operate precision measurement equipment 3. Must be able to work independently What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI2e9c32b6176d-9919
07/02/2026
Full time
Description: CNC Machinist (1st shift, Full-Time) Location: JARP RE $23.00 - $40.00/hour Schedule: Monday - Friday, 6:30am - 2:30pm POSITION SUMMARY: Under the direction of the Team Lead or Plant Management Team, the experienced CNC Machinist is responsible for evaluation of the hydraulic cylinders and/or components, identify those that can be repaired or re-used, clean, polish, hone, assemble and test those cylinders that can be. The experienced CNC machinist is also responsible for setting up and running the equipment per the appropriate work instructions. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Conduct inspection of parts during "run" per the work instruction and maintain part specification. 2. Responsible for maintaining tooling/inserts. 3. Conduct daily/weekly maintenance inspections of equipment and record. 4. May operate other equipment/machines as directed by supervision. 5. Must maintain flexibility as job or machining priorities change day to day. 6. Review the priority list, drain, blast or process to build in priority order. 7. Identify all parts as good or repairable and direct to proper location. 8. Wash/clean product as required. 9. Use prints and/or standard practices for proper assembly of the required components. 10. Review the work instruction, print and "J"/customer specifications for proper assembly techniques. 11. Set up and use torquer and nut-buster for assembly or disassembly of product. 12. Set-up the appropriate test stand to properly test assembled product when trained. 13. Conduct final testing and record on the correct "test log" when properly trained. 14. Maintain identification of all components during the assembly process. Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. MARGINAL RESPONSIBILITIES: 1. Help keep the area clean and neat (practice housekeeping). 2. Assist with the development of more efficient manufacturing methods and procedures. 3. Check machine coolant/concentration levels and service as needed. 4. May be directed to perform other tasks due to a decrease in the work load, machine being down for maintenance or a critical need exists in another area. 5. Must be open-minded to various product designs. 6. Must be able to stay on the "task" due to the manual environment. Requirements: EDUCATION AND EXPERIENCE: 1. High school diploma or equivalent 2. Two-year Associates Degree in Machine Tool techniques with one year of on-the-job CNC Machinist experience required 3. With no applicable degree, minimum of three years of on-the-job CNC Machinist experience required QUALIFICATIONS AND SKILLS: 1. Must be able to read and understand blue prints 2. Set up and operate precision measurement equipment 3. Must be able to work independently What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI2e9c32b6176d-9919
Description: CNC Mill Machinist - Vertical or Horizontal Machining Centers (2nd or 3rd Shift, Full-Time) $23.00-$40.00/hour + $1.50/hr Shift Premium Schedule: Monday-Thursday, 2:00pm-12:00am (2nd shift) Monday - Thursday, 8:00pm - 6:00am (3rd shift) If you're a CNC Machinist who excels in Vertical or Horizontal Mill Machining Centers - setup and operation , this is a place where your expertise truly matters. Join a team that values precision, craftsmanship, and continuous improvement while giving you the space to work independently and grow your skills. What You'll Do Set up and operate Vertical or Horizontal Mill Machining Centers with accuracy and efficiency Perform "first piece" inspections and ongoing part checks to maintain tight specifications Maintain tooling, inserts, and machine readiness Complete daily and weekly equipment maintenance checks Follow all material handling and safety procedures Support additional machining operations as needed Adapt to shifting priorities in a fast-paced production environment Keep your work area clean, organized, and production-ready Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. What You Bring High school diploma or equivalent Either: A two-year Associate's Degree in Machine Tool Technology + 1 year CNC experience OR 3+ years of hands-on CNC Machinist experience Strong experience with Machining Centers Ability to read and interpret blueprints Proficiency with precision measurement tools Ability to work independently with strong attention to detail Openness to learning new product designs and machining methods Requirements: What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date Build Your Future With Us If you're a skilled CNC Machinist ready to put your Machining Center expertise to work, we'd love to meet you. Apply today and join a team committed to quality, safety, and continuous improvement. PIcbfde8f73de0-8375
07/02/2026
Full time
Description: CNC Mill Machinist - Vertical or Horizontal Machining Centers (2nd or 3rd Shift, Full-Time) $23.00-$40.00/hour + $1.50/hr Shift Premium Schedule: Monday-Thursday, 2:00pm-12:00am (2nd shift) Monday - Thursday, 8:00pm - 6:00am (3rd shift) If you're a CNC Machinist who excels in Vertical or Horizontal Mill Machining Centers - setup and operation , this is a place where your expertise truly matters. Join a team that values precision, craftsmanship, and continuous improvement while giving you the space to work independently and grow your skills. What You'll Do Set up and operate Vertical or Horizontal Mill Machining Centers with accuracy and efficiency Perform "first piece" inspections and ongoing part checks to maintain tight specifications Maintain tooling, inserts, and machine readiness Complete daily and weekly equipment maintenance checks Follow all material handling and safety procedures Support additional machining operations as needed Adapt to shifting priorities in a fast-paced production environment Keep your work area clean, organized, and production-ready Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. What You Bring High school diploma or equivalent Either: A two-year Associate's Degree in Machine Tool Technology + 1 year CNC experience OR 3+ years of hands-on CNC Machinist experience Strong experience with Machining Centers Ability to read and interpret blueprints Proficiency with precision measurement tools Ability to work independently with strong attention to detail Openness to learning new product designs and machining methods Requirements: What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date Build Your Future With Us If you're a skilled CNC Machinist ready to put your Machining Center expertise to work, we'd love to meet you. Apply today and join a team committed to quality, safety, and continuous improvement. PIcbfde8f73de0-8375
Description: Experienced Machine Operator (2nd Shift, Full-Time) $23.00-$33.00/hour + $1.50/hour Shift Premium Schedule: Monday-Thursday, 2:00pm-12:00am POSITION SUMMARY: Under the direction of the Team Lead, the experienced Machine Operator is responsible for set up, adjustment and operation of the hone machine to meet dimension and finish requirements on internal surfaces of cylinders, tubes, sleeves, etc. What You'll Do Set up and run equipment per the proper work instruction. Read and interpret shop routing and prints for final diameter and surface finish requirements. Set up and run equipment per the proper work instruction. Fill out SPC charting as required. Conduct inspection of parts during run per the work instruction. Locate and obtain the parts for the job to the work station. Conduct computer functions on a day to day basis. Conduct daily/weekly maintenance inspection of equipment and record. Responsible for checking and maintaining hone "stones". Wipe out (clean) and de-burr all pieces run. What You Bring High school diploma or equivalent Either: Two year Associates Degree in Machine Tool techniques OR 2+ years of on the job machine operating experience Knowledge in the use of inspection equipment require Able to understand blue prints and gage reading Requirements: What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date Build Your Future With Us If you're an experienced Machine Operator who is ready to put your expertise to work, we'd love to meet you! Apply today and join a team committed to quality, safety, and continuous improvement. Compensation details: 20-23 Hourly Wage PIb9caa311402f-3871
07/02/2026
Full time
Description: Experienced Machine Operator (2nd Shift, Full-Time) $23.00-$33.00/hour + $1.50/hour Shift Premium Schedule: Monday-Thursday, 2:00pm-12:00am POSITION SUMMARY: Under the direction of the Team Lead, the experienced Machine Operator is responsible for set up, adjustment and operation of the hone machine to meet dimension and finish requirements on internal surfaces of cylinders, tubes, sleeves, etc. What You'll Do Set up and run equipment per the proper work instruction. Read and interpret shop routing and prints for final diameter and surface finish requirements. Set up and run equipment per the proper work instruction. Fill out SPC charting as required. Conduct inspection of parts during run per the work instruction. Locate and obtain the parts for the job to the work station. Conduct computer functions on a day to day basis. Conduct daily/weekly maintenance inspection of equipment and record. Responsible for checking and maintaining hone "stones". Wipe out (clean) and de-burr all pieces run. What You Bring High school diploma or equivalent Either: Two year Associates Degree in Machine Tool techniques OR 2+ years of on the job machine operating experience Knowledge in the use of inspection equipment require Able to understand blue prints and gage reading Requirements: What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date Build Your Future With Us If you're an experienced Machine Operator who is ready to put your expertise to work, we'd love to meet you! Apply today and join a team committed to quality, safety, and continuous improvement. Compensation details: 20-23 Hourly Wage PIb9caa311402f-3871
Description: CNC Programmer (1st shift, Full-Time, Onsite only) $32.00 - $36.50/hour Schedule: Monday-Friday, 7:00am-4:00pm POSITION SUMMARY: Under the direction of the Manufacturing Engineer / CNC Programming Team Lead, the experienced CNC Programmer is to assist with the development and provide programming as assigned for computerized machine processes in manufacturing. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Write machining programs for new parts as assigned by the Senior Programmer. 2. Maintain facilities on routings for most current machines. 3. Determines machining process from established drawings/prints. 4. Write machining programs for parts with CAM software. 5. Decide which cutting tools and speeds and feeds are appropriate, considering the design specifications, materials. 6. Run simulation tests. 7. Create set-up sheets for programmed parts. 8. Evaluate programs and determine if improvements can be made to the code to increase efficiency, quality and safety. 9. Review ECN's for possible program changes. Requirements: EDUCATION AND EXPERIENCE: Programming education from a vocational/technical school or 2 years of equivalent experience What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PIfff4a4e2a6ba-1864
07/02/2026
Full time
Description: CNC Programmer (1st shift, Full-Time, Onsite only) $32.00 - $36.50/hour Schedule: Monday-Friday, 7:00am-4:00pm POSITION SUMMARY: Under the direction of the Manufacturing Engineer / CNC Programming Team Lead, the experienced CNC Programmer is to assist with the development and provide programming as assigned for computerized machine processes in manufacturing. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Write machining programs for new parts as assigned by the Senior Programmer. 2. Maintain facilities on routings for most current machines. 3. Determines machining process from established drawings/prints. 4. Write machining programs for parts with CAM software. 5. Decide which cutting tools and speeds and feeds are appropriate, considering the design specifications, materials. 6. Run simulation tests. 7. Create set-up sheets for programmed parts. 8. Evaluate programs and determine if improvements can be made to the code to increase efficiency, quality and safety. 9. Review ECN's for possible program changes. Requirements: EDUCATION AND EXPERIENCE: Programming education from a vocational/technical school or 2 years of equivalent experience What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PIfff4a4e2a6ba-1864
Description: CNC Lathe Machinist - (1st, 2nd or 3rd Shift, Full-Time)$23.00 - $40.00/hour + $1.50/hr Shift Premium for 2nd & 3rd shiftSchedule: 1st shift: Monday - Friday, 6:00am - 2:00pm2nd shift: Monday - Thursday, 2:00pm-12:00am3rd shift: Monday - Thursday, 8:00pm - 6:00am POSITION SUMMARY:Under the direction of the Team Lead or Plant Management Team, the experienced CNC Lathe Machinist is responsible for setting up and running the equipment per the appropriate work instructions. Also, the CNC Lathe Machinist is responsible for measuring and obtaining the inspection of the "first" piece produced.ESSENTIAL DUTIES AND RESPONSIBILITIES:1. Conduct inspection of parts during "run" per the work instruction and maintain part specification.2. Responsible for maintaining tooling/inserts.3. Conduct daily/weekly maintenance inspections of equipment and record.4. Follow established material handling procedures.5. May operate other equipment/machines as directed by supervision.6. Must maintain flexibility as job or machining priorities change day to day.7. Follow all safety rules while performing job functions.Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. MARGINAL RESPONSIBILITIES: 1. Help keep the area clean and neat (practice housekeeping).2. Assist with the development of more efficient manufacturing methods and procedures.3. Check machine coolant/concentration levels and service as needed.4. May be directed to perform other tasks due to a decrease in the work load, machine being down for maintenance or a critical need exists in another area.5. Must be open-minded to various product designs.6. Must be able to stay on the "task" due to the manual environment. Requirements: EDUCATION AND EXPERIENCE:1. High school diploma or equivalent2. Two-year Associates Degree in Machine Tool techniques with one year of on-the-job CNC Machinist experience required3. With no applicable degree, minimum of three years of on-the-job CNC Machinist experience requiredQUALIFICATIONS AND SKILLS:1. Must be able to read and understand blue prints2. Set up and operate precision measurement equipment3. Must be able to work independently What You'll Love About Working HereWe offer a full, comprehensive benefits package designed to support you and your family, including:Paid Time Off (PTO)10 paid holidaysMedical, dental, and vision insuranceHSA and FSA optionsCompany-paid life and AD&D insuranceCompany-paid Short-term disability (STD)Company-paid Long-term disability (LTD)Employee Assistance Program (EAP)401kBenefit eligibility begins on the first day of the month following your hire date PI5d7f5eb8fb86-9823
06/25/2026
Description: CNC Lathe Machinist - (1st, 2nd or 3rd Shift, Full-Time)$23.00 - $40.00/hour + $1.50/hr Shift Premium for 2nd & 3rd shiftSchedule: 1st shift: Monday - Friday, 6:00am - 2:00pm2nd shift: Monday - Thursday, 2:00pm-12:00am3rd shift: Monday - Thursday, 8:00pm - 6:00am POSITION SUMMARY:Under the direction of the Team Lead or Plant Management Team, the experienced CNC Lathe Machinist is responsible for setting up and running the equipment per the appropriate work instructions. Also, the CNC Lathe Machinist is responsible for measuring and obtaining the inspection of the "first" piece produced.ESSENTIAL DUTIES AND RESPONSIBILITIES:1. Conduct inspection of parts during "run" per the work instruction and maintain part specification.2. Responsible for maintaining tooling/inserts.3. Conduct daily/weekly maintenance inspections of equipment and record.4. Follow established material handling procedures.5. May operate other equipment/machines as directed by supervision.6. Must maintain flexibility as job or machining priorities change day to day.7. Follow all safety rules while performing job functions.Candidates may be required to complete a machinist skills assessment, which may include blueprint reading, precision measurement, gauge usage, and basic machining calculations. MARGINAL RESPONSIBILITIES: 1. Help keep the area clean and neat (practice housekeeping).2. Assist with the development of more efficient manufacturing methods and procedures.3. Check machine coolant/concentration levels and service as needed.4. May be directed to perform other tasks due to a decrease in the work load, machine being down for maintenance or a critical need exists in another area.5. Must be open-minded to various product designs.6. Must be able to stay on the "task" due to the manual environment. Requirements: EDUCATION AND EXPERIENCE:1. High school diploma or equivalent2. Two-year Associates Degree in Machine Tool techniques with one year of on-the-job CNC Machinist experience required3. With no applicable degree, minimum of three years of on-the-job CNC Machinist experience requiredQUALIFICATIONS AND SKILLS:1. Must be able to read and understand blue prints2. Set up and operate precision measurement equipment3. Must be able to work independently What You'll Love About Working HereWe offer a full, comprehensive benefits package designed to support you and your family, including:Paid Time Off (PTO)10 paid holidaysMedical, dental, and vision insuranceHSA and FSA optionsCompany-paid life and AD&D insuranceCompany-paid Short-term disability (STD)Company-paid Long-term disability (LTD)Employee Assistance Program (EAP)401kBenefit eligibility begins on the first day of the month following your hire date PI5d7f5eb8fb86-9823