At a Glance Company: Barnes Aerospace Location: 7 Connecticut South Dr, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:00 PM - 11:30 PM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3-5+ years VTL / lathe machining experience) Work Authorization: Must be authorized to work in the United States Safety Sensitive: Yes (FAA & DOT compliance required) Why This Role Exists This role exists to support aerospace manufacturing and repair programs requiring precision turning of rotating components. At Barnes Aerospace, this position plays a key role in machining complex parts on VTL and lathe equipment, ensuring performance, reliability, and compliance with aerospace standards. The Work You'll Be Doing In this role, you will: Perform complex setups and operate CNC and/or manual VTL and lathe machines Support both production and NPI (New Product Introduction) work with minimal supervision Machine rotating aerospace components, including parts with plasma coatings and K/E seals Make program edits and process adjustments to meet part specifications Read and interpret blueprints, operation sheets, and machining instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Work with engineering teams to optimize machining processes, tooling, and setups Detect and report machining issues, material concerns, or quality deviations Maintain safety, quality, and production standards Provide guidance and training to other machinists as needed Machines, Controls & Software You'll work with equipment such as: Machines: CNC and manual VTLs and lathes Equipment Brands: Mazak, Mori Seiki, Leblond (and similar) Controls: Fanuc Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys Coated aerospace components (plasma coatings, K/E seals) What We're Looking ForRequired 3-5+ years of machining experience in an aerospace environment 3+ years of experience setting up and operating VTLs and/or lathes Strong math skills and understanding of GD&T Ability to read and interpret blueprints and operation sheets Experience machining tight-tolerance components Strong problem-solving skills and ability to work independently Ability to work in a team-based manufacturing environment Preferred (Not Required) Experience machining plasma coatings and K/E seals Experience with Mazak, Mori Seiki, or Leblond machines Familiarity with Statistical Process Control (SPC) Willingness to learn CNC programming Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing and repair programs Opportunity to work on complex rotating components Modern equipment and strong engineering support Competitive pay with 15% shift differential Team-driven environment focused on quality and precision Opportunities to expand skills and grow within the company Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:00 PM - 11:30 PM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: 7 Connecticut South Dr, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:00 PM - 11:30 PM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3-5+ years VTL / lathe machining experience) Work Authorization: Must be authorized to work in the United States Safety Sensitive: Yes (FAA & DOT compliance required) Why This Role Exists This role exists to support aerospace manufacturing and repair programs requiring precision turning of rotating components. At Barnes Aerospace, this position plays a key role in machining complex parts on VTL and lathe equipment, ensuring performance, reliability, and compliance with aerospace standards. The Work You'll Be Doing In this role, you will: Perform complex setups and operate CNC and/or manual VTL and lathe machines Support both production and NPI (New Product Introduction) work with minimal supervision Machine rotating aerospace components, including parts with plasma coatings and K/E seals Make program edits and process adjustments to meet part specifications Read and interpret blueprints, operation sheets, and machining instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Work with engineering teams to optimize machining processes, tooling, and setups Detect and report machining issues, material concerns, or quality deviations Maintain safety, quality, and production standards Provide guidance and training to other machinists as needed Machines, Controls & Software You'll work with equipment such as: Machines: CNC and manual VTLs and lathes Equipment Brands: Mazak, Mori Seiki, Leblond (and similar) Controls: Fanuc Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys Coated aerospace components (plasma coatings, K/E seals) What We're Looking ForRequired 3-5+ years of machining experience in an aerospace environment 3+ years of experience setting up and operating VTLs and/or lathes Strong math skills and understanding of GD&T Ability to read and interpret blueprints and operation sheets Experience machining tight-tolerance components Strong problem-solving skills and ability to work independently Ability to work in a team-based manufacturing environment Preferred (Not Required) Experience machining plasma coatings and K/E seals Experience with Mazak, Mori Seiki, or Leblond machines Familiarity with Statistical Process Control (SPC) Willingness to learn CNC programming Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing and repair programs Opportunity to work on complex rotating components Modern equipment and strong engineering support Competitive pay with 15% shift differential Team-driven environment focused on quality and precision Opportunities to expand skills and grow within the company Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:00 PM - 11:30 PM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: 7 Connecticut South Dr, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:00 PM - 11:30 PM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3-5+ years CNC machining experience) Why This Role Exists This role exists to support aerospace manufacturing and repair programs requiring precision milling across both production and NPI (New Product Introduction) work. At Barnes Aerospace, this position plays a key role in machining complex components while supporting process development and continuous improvement. The Work You'll Be Doing In this role, you will: Perform complex setups and operate CNC milling machines, including Devlieg equipment Support both established production jobs and NPI work with minimal supervision Make program edits and process adjustments to ensure parts meet specifications Read and interpret blueprints, operation sheets, and machining instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Work with engineering to optimize part positioning, tooling pressure, and machining processes Detect and report machining issues, material concerns, or quality deviations Maintain high standards for safety, quality, and process consistency Support continuous improvement initiatives and Lean manufacturing practices Machines, Controls & Software You'll work with equipment such as: Machines: CNC milling machines including Devlieg and other multi-axis equipment Controls: Fanuc Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys What We're Looking ForRequired 3-5+ years of CNC machining experience Experience setting up and operating CNC milling machines Familiarity with Fanuc controls Strong math skills and understanding of GD&T Ability to read and interpret blueprints and operation sheets Experience troubleshooting machining processes and making adjustments Strong communication and teamwork skills Preferred (Not Required) Aerospace manufacturing experience Experience with Devlieg milling machines Familiarity with Statistical Process Control (SPC) Willingness to learn CNC programming Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing and repair programs Opportunity to work on both production and NPI projects Modern equipment and strong engineering support Competitive pay with 15% shift differential Team-based environment focused on continuous improvement Opportunities to expand technical skills Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:00 PM - 11:30 PM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: 7 Connecticut South Dr, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:00 PM - 11:30 PM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3-5+ years CNC machining experience) Why This Role Exists This role exists to support aerospace manufacturing and repair programs requiring precision milling across both production and NPI (New Product Introduction) work. At Barnes Aerospace, this position plays a key role in machining complex components while supporting process development and continuous improvement. The Work You'll Be Doing In this role, you will: Perform complex setups and operate CNC milling machines, including Devlieg equipment Support both established production jobs and NPI work with minimal supervision Make program edits and process adjustments to ensure parts meet specifications Read and interpret blueprints, operation sheets, and machining instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Work with engineering to optimize part positioning, tooling pressure, and machining processes Detect and report machining issues, material concerns, or quality deviations Maintain high standards for safety, quality, and process consistency Support continuous improvement initiatives and Lean manufacturing practices Machines, Controls & Software You'll work with equipment such as: Machines: CNC milling machines including Devlieg and other multi-axis equipment Controls: Fanuc Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys What We're Looking ForRequired 3-5+ years of CNC machining experience Experience setting up and operating CNC milling machines Familiarity with Fanuc controls Strong math skills and understanding of GD&T Ability to read and interpret blueprints and operation sheets Experience troubleshooting machining processes and making adjustments Strong communication and teamwork skills Preferred (Not Required) Aerospace manufacturing experience Experience with Devlieg milling machines Familiarity with Statistical Process Control (SPC) Willingness to learn CNC programming Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing and repair programs Opportunity to work on both production and NPI projects Modern equipment and strong engineering support Competitive pay with 15% shift differential Team-based environment focused on continuous improvement Opportunities to expand technical skills Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:00 PM - 11:30 PM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC grinding or machining experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs requiring advanced grinding operations. At Barnes Aerospace, this position plays a key role in finishing complex components to tight tolerances using high-efficiency deep grinding (HEDG) and other precision grinding processes. The Work You'll Be Doing In this role, you will: Set up and operate CNC grinding machines in a precision aerospace environment Perform high-efficiency deep grinding (HEDG) and other grinding operations Machine components to tight tolerances and exact specifications Make program edits, offset adjustments, and tooling changes as needed Read and interpret blueprints, operation sheets, and work instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Perform in-process inspection to ensure part quality and compliance Work with exotic materials including Inconel, Rene, and other aerospace alloys Collaborate with engineering and production teams to resolve machining and quality issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC grinding machines, including HEDG and precision grinding equipment (Campbell grinders and similar) Controls: Fanuc and other CNC control systems depending on equipment Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Rene alloys Titanium Stainless Steel Other aerospace-grade materials What We're Looking ForRequired 3+ years of CNC grinding or machining experience Experience setting up and operating CNC equipment Ability to read blueprints and understand GD&T Strong mechanical aptitude and math skills Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work in a team environment Preferred (Not Required) Experience with HEDG or precision grinding operations Aerospace manufacturing experience Experience machining exotic materials such as Inconel or Rene alloys Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing programs Opportunity to work on advanced grinding processes Modern equipment and structured production environment Competitive pay with 15% shift differential Opportunities to expand skills in precision machining Strong team environment and engineering support Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC grinding or machining experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs requiring advanced grinding operations. At Barnes Aerospace, this position plays a key role in finishing complex components to tight tolerances using high-efficiency deep grinding (HEDG) and other precision grinding processes. The Work You'll Be Doing In this role, you will: Set up and operate CNC grinding machines in a precision aerospace environment Perform high-efficiency deep grinding (HEDG) and other grinding operations Machine components to tight tolerances and exact specifications Make program edits, offset adjustments, and tooling changes as needed Read and interpret blueprints, operation sheets, and work instructions Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and verniers Perform in-process inspection to ensure part quality and compliance Work with exotic materials including Inconel, Rene, and other aerospace alloys Collaborate with engineering and production teams to resolve machining and quality issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC grinding machines, including HEDG and precision grinding equipment (Campbell grinders and similar) Controls: Fanuc and other CNC control systems depending on equipment Inspection Tools: Micrometers, depth gages, height gages, verniers, and other precision measuring tools Materials You'll Work With Inconel Rene alloys Titanium Stainless Steel Other aerospace-grade materials What We're Looking ForRequired 3+ years of CNC grinding or machining experience Experience setting up and operating CNC equipment Ability to read blueprints and understand GD&T Strong mechanical aptitude and math skills Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work in a team environment Preferred (Not Required) Experience with HEDG or precision grinding operations Aerospace manufacturing experience Experience machining exotic materials such as Inconel or Rene alloys Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing programs Opportunity to work on advanced grinding processes Modern equipment and structured production environment Competitive pay with 15% shift differential Opportunities to expand skills in precision machining Strong team environment and engineering support Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC machining experience) Why This Role Exists This role exists to support ongoing aerospace production programs focused on precision turning operations. At Barnes Aerospace, this position plays a key role in machining complex components from forgings and raw materials while maintaining tight tolerances and consistent quality. The Work You'll Be Doing In this role, you will: Set up and operate CNC turning centers in a production environment Run multiple machines within a machining cell when feasible Perform job setups, tool changes, and offset adjustments Read and interpret blueprints, operation sheets, and CNC programs Machine aerospace components to tight tolerances ( .001") Load and unload parts manually or using hoists and lifting equipment Apply coolant, monitor tooling, and replace worn or damaged tools Perform in-process inspection using precision measuring instruments Maintain quality standards and ensure parts meet customer specifications Collaborate with engineering, quality, and production teams to resolve issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC turning centers from Doosan, Mazak, Okuma, and Mori Seiki Controls: Fanuc Inspection Tools: Micrometers, dial indicators, gauges, and other precision measuring tools Equipment: Hoists, fixtures, and standard shop tooling Materials You'll Work With Inconel Titanium Stainless Steel Aluminum What We're Looking ForRequired 3+ years of CNC turning or machining experience Experience setting up and operating CNC machines Ability to read blueprints and understand GD&T Strong mechanical aptitude and math skills Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work independently or in a team Preferred (Not Required) Aerospace manufacturing experience Experience running multiple machines within a cell environment Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace programs with long-term work Modern CNC equipment and structured production environment Competitive pay with 15% shift differential Opportunities to work on precision components and develop skills Strong team environment and engineering support Overtime opportunities available Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC machining experience) Why This Role Exists This role exists to support ongoing aerospace production programs focused on precision turning operations. At Barnes Aerospace, this position plays a key role in machining complex components from forgings and raw materials while maintaining tight tolerances and consistent quality. The Work You'll Be Doing In this role, you will: Set up and operate CNC turning centers in a production environment Run multiple machines within a machining cell when feasible Perform job setups, tool changes, and offset adjustments Read and interpret blueprints, operation sheets, and CNC programs Machine aerospace components to tight tolerances ( .001") Load and unload parts manually or using hoists and lifting equipment Apply coolant, monitor tooling, and replace worn or damaged tools Perform in-process inspection using precision measuring instruments Maintain quality standards and ensure parts meet customer specifications Collaborate with engineering, quality, and production teams to resolve issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC turning centers from Doosan, Mazak, Okuma, and Mori Seiki Controls: Fanuc Inspection Tools: Micrometers, dial indicators, gauges, and other precision measuring tools Equipment: Hoists, fixtures, and standard shop tooling Materials You'll Work With Inconel Titanium Stainless Steel Aluminum What We're Looking ForRequired 3+ years of CNC turning or machining experience Experience setting up and operating CNC machines Ability to read blueprints and understand GD&T Strong mechanical aptitude and math skills Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work independently or in a team Preferred (Not Required) Aerospace manufacturing experience Experience running multiple machines within a cell environment Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace programs with long-term work Modern CNC equipment and structured production environment Competitive pay with 15% shift differential Opportunities to work on precision components and develop skills Strong team environment and engineering support Overtime opportunities available Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 1st Shift: Monday-Friday 7:00 AM - 3:30 PM 2nd Shift: Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC milling experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs across multi-axis milling operations. At Barnes Aerospace, this position plays a key role in producing complex components using modern CNC equipment in a structured, team-based environment. The Work You'll Be Doing In this role, you will: Set up and operate 3-, 4-, and 5-axis CNC milling machines Run multiple machines within machining cells when feasible Perform job setups, changeovers, and tooling adjustments Read and interpret blueprints, operation sheets, and CNC programs at the machine Machine aerospace components from raw material to finished part Work with hard metals including Inconel, Titanium, and Stainless Steel Load parts and fixtures manually or using hoists and lifting equipment Use Fanuc controls and make offsets as required by the program Perform in-process inspection using precision measuring tools Hold tight tolerances (thousandths) on precision components Collaborate with engineering, quality, and production teams to resolve issues and improve processes Machines, Controls & Software You'll work with equipment such as: Machines: Multi-axis CNC milling machines from Doosan, Mazak, Okuma, Matsuura, Mori Seiki, and Johnford Controls: Fanuc Inspection Tools: Gauges, swing gauges, calipers, micrometers Equipment: Hoists, fixtures, right-angle heads Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys What We're Looking ForRequired 3+ years of CNC milling experience (multi-axis preferred) Experience setting up and operating CNC machines Ability to read blueprints and understand GD&T Strong math skills and mechanical aptitude Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work in a team environment Preferred (Not Required) Aerospace manufacturing experience Experience running multiple machines in a cell environment Experience working with exotic materials Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing programs Modern multi-axis CNC equipment Opportunities to work on complex, high-precision parts Competitive pay with 2nd shift differential Strong team environment and engineering support Opportunities to expand skills and grow within the company Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: 1st Shift: Monday-Friday 7:00 AM - 3:30 PM 2nd Shift: Monday-Friday 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: 39 Bradley Park Rd, East Granby, CT 06026 (on-site) Job Type: Full-Time Pay Range: $26 - $38 per hour (based on experience) Shift: 1st Shift: Monday-Friday 7:00 AM - 3:30 PM 2nd Shift: Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC milling experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs across multi-axis milling operations. At Barnes Aerospace, this position plays a key role in producing complex components using modern CNC equipment in a structured, team-based environment. The Work You'll Be Doing In this role, you will: Set up and operate 3-, 4-, and 5-axis CNC milling machines Run multiple machines within machining cells when feasible Perform job setups, changeovers, and tooling adjustments Read and interpret blueprints, operation sheets, and CNC programs at the machine Machine aerospace components from raw material to finished part Work with hard metals including Inconel, Titanium, and Stainless Steel Load parts and fixtures manually or using hoists and lifting equipment Use Fanuc controls and make offsets as required by the program Perform in-process inspection using precision measuring tools Hold tight tolerances (thousandths) on precision components Collaborate with engineering, quality, and production teams to resolve issues and improve processes Machines, Controls & Software You'll work with equipment such as: Machines: Multi-axis CNC milling machines from Doosan, Mazak, Okuma, Matsuura, Mori Seiki, and Johnford Controls: Fanuc Inspection Tools: Gauges, swing gauges, calipers, micrometers Equipment: Hoists, fixtures, right-angle heads Materials You'll Work With Inconel Titanium Stainless Steel Aerospace-grade alloys What We're Looking ForRequired 3+ years of CNC milling experience (multi-axis preferred) Experience setting up and operating CNC machines Ability to read blueprints and understand GD&T Strong math skills and mechanical aptitude Experience working with tight tolerances Ability to use precision measuring tools Strong problem-solving skills and ability to work in a team environment Preferred (Not Required) Aerospace manufacturing experience Experience running multiple machines in a cell environment Experience working with exotic materials Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace manufacturing programs Modern multi-axis CNC equipment Opportunities to work on complex, high-precision parts Competitive pay with 2nd shift differential Strong team environment and engineering support Opportunities to expand skills and grow within the company Pay, Benefits & Schedule Pay Range: $26 - $38/hr (DOE) Pay Notes: % shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: 1st Shift: Monday-Friday 7:00 AM - 3:30 PM 2nd Shift: Monday-Friday 3:30 PM - 12:00 AM Overtime available Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (DOE) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % Overtime: Available (not required) Experience Level: Mid-Senior (3-10+ years CNC machining) Why This Role Exists This role exists to support growing aerospace production demand across precision turning operations. At Barnes Aerospace, this position plays a key role in machining forged aerospace components to tight tolerances for long-term commercial and defense programs. The Work You'll Be Doing In this role, you will: Set up and operate CNC turning centers in a production environment Run multiple machines within a machining cell when feasible Machine aerospace forgings and components to tight tolerances ( .001") Read and interpret blueprints, tool setup sheets, and operation instructions Perform first-piece and in-process inspection using precision tools Load and unload parts manually or using hoists Adjust offsets, replace tooling, and troubleshoot machining issues Maintain quality and safety standards throughout production Machines, Controls & Software Machines: Mazak, Okuma, Doosan, Mori Seiki turning centers Controls: Fanuc Inspection Tools: Micrometers, dial indicators, gauges, profilometers Materials You'll Work With Inconel Titanium Stainless Steel Aluminum What We're Looking ForRequired: 3+ years CNC turning experience Ability to read blueprints and understand GD&T Experience with setups, offsets, and tool changes Comfortable holding tight tolerances Strong problem-solving and attention to detail Preferred: Aerospace machining experience Multi-machine / cell experience Fanuc control familiarity Why Machinists Like Working Here Stable aerospace programs Modern CNC equipment Clean, organized shop 15% shift differential Opportunity to grow skills across machines Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Shift Differential: % Benefits: Medical, dental, vision (start 1st of month after hire) 401(k): 50% match on first 6% + 4% annual contribution PTO: 2 weeks + 4 floating holidays Quarterly incentives + annual bonus potential 100% education reimbursement after 1 year Flex time program + Calm app discounts Schedule: Monday-Friday 3:30 PM - 12:00 AM Overtime available (not required) Apply Apply directly through hireCNC. Apply now or save this job to come back later.
06/15/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (DOE) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % Overtime: Available (not required) Experience Level: Mid-Senior (3-10+ years CNC machining) Why This Role Exists This role exists to support growing aerospace production demand across precision turning operations. At Barnes Aerospace, this position plays a key role in machining forged aerospace components to tight tolerances for long-term commercial and defense programs. The Work You'll Be Doing In this role, you will: Set up and operate CNC turning centers in a production environment Run multiple machines within a machining cell when feasible Machine aerospace forgings and components to tight tolerances ( .001") Read and interpret blueprints, tool setup sheets, and operation instructions Perform first-piece and in-process inspection using precision tools Load and unload parts manually or using hoists Adjust offsets, replace tooling, and troubleshoot machining issues Maintain quality and safety standards throughout production Machines, Controls & Software Machines: Mazak, Okuma, Doosan, Mori Seiki turning centers Controls: Fanuc Inspection Tools: Micrometers, dial indicators, gauges, profilometers Materials You'll Work With Inconel Titanium Stainless Steel Aluminum What We're Looking ForRequired: 3+ years CNC turning experience Ability to read blueprints and understand GD&T Experience with setups, offsets, and tool changes Comfortable holding tight tolerances Strong problem-solving and attention to detail Preferred: Aerospace machining experience Multi-machine / cell experience Fanuc control familiarity Why Machinists Like Working Here Stable aerospace programs Modern CNC equipment Clean, organized shop 15% shift differential Opportunity to grow skills across machines Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Shift Differential: % Benefits: Medical, dental, vision (start 1st of month after hire) 401(k): 50% match on first 6% + 4% annual contribution PTO: 2 weeks + 4 floating holidays Quarterly incentives + annual bonus potential 100% education reimbursement after 1 year Flex time program + Calm app discounts Schedule: Monday-Friday 3:30 PM - 12:00 AM Overtime available (not required) Apply Apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $26 - $36 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (5+ years inspection experience) Why This Role Exists This role exists to support aerospace manufacturing programs by ensuring all components meet strict quality and customer specifications. At Barnes Aerospace, this position plays a critical role in verifying precision machined parts through detailed inspection processes and maintaining compliance with aerospace standards. The Work You'll Be Doing In this role, you will: Perform final and in-process inspection of aerospace engine components Conduct dimensional and visual inspections using both CMM and manual inspection tools Create, edit, and correlate PC-DMIS programs based on prints and solid models Verify measurements using both CMM data and hard gaging methods Interpret blueprints, operation sheets, and customer specifications Ensure all inspected parts meet customer requirements for acceptance Identify non-conforming parts and complete required documentation for rework or disposition Support incoming, in-process, and final inspection activities Work independently to troubleshoot inspection and measurement issues Machines, Controls & Software You'll work with equipment such as: Inspection Equipment: CMM machines Software: PC-DMIS Inspection Tools: Micrometers, calipers, swing gages, height gages, and other precision measuring equipment Materials You'll Work With Aerospace engine components Precision machined metal parts (Inconel, Titanium, Stainless Steel, Aluminum) What We're Looking ForRequired 5+ years of inspection experience in aerospace or manufacturing Strong experience with CMM operation and PC-DMIS programming Ability to read, analyze, and interpret blueprints and technical documents Strong understanding of GD&T Experience performing dimensional and visual inspections Ability to work independently and solve problems with minimal supervision Strong attention to detail and ability to work in a fast-paced environment Preferred (Not Required) Experience with incoming, in-process, and final inspection Experience building or calibrating hard gaging Aerospace manufacturing experience Why Inspectors Like Working Here Inspectors choose Barnes Aerospace because: Critical role in aerospace quality and compliance Clean, structured, and process-driven environment Advanced inspection equipment and tools Competitive pay with 15% shift differential Overtime opportunities available Strong benefits and long-term stability Pay, Benefits & Schedule Pay Range: $26 - $36/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.
06/14/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $26 - $36 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Senior (5+ years inspection experience) Why This Role Exists This role exists to support aerospace manufacturing programs by ensuring all components meet strict quality and customer specifications. At Barnes Aerospace, this position plays a critical role in verifying precision machined parts through detailed inspection processes and maintaining compliance with aerospace standards. The Work You'll Be Doing In this role, you will: Perform final and in-process inspection of aerospace engine components Conduct dimensional and visual inspections using both CMM and manual inspection tools Create, edit, and correlate PC-DMIS programs based on prints and solid models Verify measurements using both CMM data and hard gaging methods Interpret blueprints, operation sheets, and customer specifications Ensure all inspected parts meet customer requirements for acceptance Identify non-conforming parts and complete required documentation for rework or disposition Support incoming, in-process, and final inspection activities Work independently to troubleshoot inspection and measurement issues Machines, Controls & Software You'll work with equipment such as: Inspection Equipment: CMM machines Software: PC-DMIS Inspection Tools: Micrometers, calipers, swing gages, height gages, and other precision measuring equipment Materials You'll Work With Aerospace engine components Precision machined metal parts (Inconel, Titanium, Stainless Steel, Aluminum) What We're Looking ForRequired 5+ years of inspection experience in aerospace or manufacturing Strong experience with CMM operation and PC-DMIS programming Ability to read, analyze, and interpret blueprints and technical documents Strong understanding of GD&T Experience performing dimensional and visual inspections Ability to work independently and solve problems with minimal supervision Strong attention to detail and ability to work in a fast-paced environment Preferred (Not Required) Experience with incoming, in-process, and final inspection Experience building or calibrating hard gaging Aerospace manufacturing experience Why Inspectors Like Working Here Inspectors choose Barnes Aerospace because: Critical role in aerospace quality and compliance Clean, structured, and process-driven environment Advanced inspection equipment and tools Competitive pay with 15% shift differential Overtime opportunities available Strong benefits and long-term stability Pay, Benefits & Schedule Pay Range: $26 - $36/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available, but not required Experience Level: Mid-Level to Senior (3+ years CNC milling experience) Why This Role Exists This role exists to support ongoing aerospace production demand across complex multi-axis milling operations. At Barnes Aerospace, this position plays a key role in machining precision aerospace components with a strong focus on quality, consistency, and craftsmanship. The Work You'll Be Doing In this role, you will: Set up and operate CNC multi-axis milling machines in a high-precision aerospace environment Run complex milling jobs with minimal supervision while ensuring parts meet print and process requirements Perform job changeovers and make adjustments as needed to maintain part quality Read and interpret blueprints, work instructions, and operation sheets Work with standard and geometric tolerances on aerospace components Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and dial calipers Hold tight tolerances on precision machined parts Support repeat production work while maintaining quality and throughput Collaborate with production, engineering, and quality teams to solve machining issues and keep work moving Machines, Controls & Software You'll work with equipment such as: Machines: Multi-axis CNC milling machines, including equipment from Doosan, Mazak, Okuma, Matsuura, Mori Seiki, and Johnford Controls: Fanuc and other CNC controls depending on machine Inspection Tools: Micrometers, depth gages, height gages, dial calipers, and other standard precision measuring tools Materials You'll Work With Stainless Steel Titanium Inconel Other aerospace alloys What We're Looking ForRequired 3+ years of experience setting up and operating CNC multi-axis milling machines Strong blueprint reading skills and understanding of GD&T Experience performing job setups and changeovers on CNC equipment Strong mechanical aptitude and solid math skills Ability to hold tight tolerances and inspect your own work Strong communication and problem-solving skills Ability to work in a team-based aerospace manufacturing environment Preferred (Not Required) Aerospace manufacturing experience Experience machining larger precision parts Experience with multi-axis milling in a high-precision environment Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace work with long-term programs Clean, professional manufacturing environment Modern equipment and advanced machining work Competitive pay plus 15% shift differential Overtime is available, but not required Strong benefits package Opportunities to continue growing your machining skills in a precision-focused shop Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available, but not required Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/14/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available, but not required Experience Level: Mid-Level to Senior (3+ years CNC milling experience) Why This Role Exists This role exists to support ongoing aerospace production demand across complex multi-axis milling operations. At Barnes Aerospace, this position plays a key role in machining precision aerospace components with a strong focus on quality, consistency, and craftsmanship. The Work You'll Be Doing In this role, you will: Set up and operate CNC multi-axis milling machines in a high-precision aerospace environment Run complex milling jobs with minimal supervision while ensuring parts meet print and process requirements Perform job changeovers and make adjustments as needed to maintain part quality Read and interpret blueprints, work instructions, and operation sheets Work with standard and geometric tolerances on aerospace components Verify dimensions using precision measuring tools such as micrometers, depth gages, height gages, and dial calipers Hold tight tolerances on precision machined parts Support repeat production work while maintaining quality and throughput Collaborate with production, engineering, and quality teams to solve machining issues and keep work moving Machines, Controls & Software You'll work with equipment such as: Machines: Multi-axis CNC milling machines, including equipment from Doosan, Mazak, Okuma, Matsuura, Mori Seiki, and Johnford Controls: Fanuc and other CNC controls depending on machine Inspection Tools: Micrometers, depth gages, height gages, dial calipers, and other standard precision measuring tools Materials You'll Work With Stainless Steel Titanium Inconel Other aerospace alloys What We're Looking ForRequired 3+ years of experience setting up and operating CNC multi-axis milling machines Strong blueprint reading skills and understanding of GD&T Experience performing job setups and changeovers on CNC equipment Strong mechanical aptitude and solid math skills Ability to hold tight tolerances and inspect your own work Strong communication and problem-solving skills Ability to work in a team-based aerospace manufacturing environment Preferred (Not Required) Aerospace manufacturing experience Experience machining larger precision parts Experience with multi-axis milling in a high-precision environment Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace work with long-term programs Clean, professional manufacturing environment Modern equipment and advanced machining work Competitive pay plus 15% shift differential Overtime is available, but not required Strong benefits package Opportunities to continue growing your machining skills in a precision-focused shop Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available, but not required Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available, but not required Experience Level: Mid-Level to Senior (3+ years CNC grinding or machining experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs requiring tight-tolerance grinding operations. At Barnes Aerospace, this position plays a key role in finishing critical components where surface integrity, dimensional accuracy, and consistency are essential. The Work You'll Be Doing In this role, you will: Set up and operate CNC and manual grinding equipment in a precision machining environment Perform surface and precision grinding operations on aerospace components Work from blueprints, operation sheets, and work instructions to meet exact specifications Make adjustments to offsets and machine parameters to maintain quality Verify dimensions using precision measuring instruments such as micrometers, depth gages, height gages, and dial calipers Hold tight tolerances on critical features and surfaces Perform in-process inspection to ensure parts meet print requirements Support production flow by preparing parts for downstream operations Collaborate with production and engineering teams to resolve machining and quality issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC grinding machines and surface grinders, including Campbell grinders and other precision grinding equipment Controls: Fanuc and other CNC control systems depending on equipment Inspection Tools: Micrometers, depth gages, height gages, dial calipers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Other aerospace alloys What We're Looking ForRequired 3+ years of CNC grinding or machining experience Experience setting up and operating precision grinding equipment or CNC machines Ability to read blueprints and understand GD&T Strong attention to detail and ability to hold tight tolerances Experience using precision measuring instruments Strong mechanical aptitude and problem-solving skills Ability to work in a team-based manufacturing environment Preferred (Not Required) Aerospace manufacturing experience Experience with surface grinding or precision grinding operations Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace programs with long-term work Clean, organized, and professional shop environment Advanced precision work on critical components Competitive pay plus 15% shift differential Overtime available but not required Strong benefits package and career growth opportunities Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available, but not required Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
06/14/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $28 - $38 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available, but not required Experience Level: Mid-Level to Senior (3+ years CNC grinding or machining experience) Why This Role Exists This role exists to support precision aerospace manufacturing programs requiring tight-tolerance grinding operations. At Barnes Aerospace, this position plays a key role in finishing critical components where surface integrity, dimensional accuracy, and consistency are essential. The Work You'll Be Doing In this role, you will: Set up and operate CNC and manual grinding equipment in a precision machining environment Perform surface and precision grinding operations on aerospace components Work from blueprints, operation sheets, and work instructions to meet exact specifications Make adjustments to offsets and machine parameters to maintain quality Verify dimensions using precision measuring instruments such as micrometers, depth gages, height gages, and dial calipers Hold tight tolerances on critical features and surfaces Perform in-process inspection to ensure parts meet print requirements Support production flow by preparing parts for downstream operations Collaborate with production and engineering teams to resolve machining and quality issues Machines, Controls & Software You'll work with equipment such as: Machines: CNC grinding machines and surface grinders, including Campbell grinders and other precision grinding equipment Controls: Fanuc and other CNC control systems depending on equipment Inspection Tools: Micrometers, depth gages, height gages, dial calipers, and other precision measuring tools Materials You'll Work With Inconel Titanium Stainless Steel Other aerospace alloys What We're Looking ForRequired 3+ years of CNC grinding or machining experience Experience setting up and operating precision grinding equipment or CNC machines Ability to read blueprints and understand GD&T Strong attention to detail and ability to hold tight tolerances Experience using precision measuring instruments Strong mechanical aptitude and problem-solving skills Ability to work in a team-based manufacturing environment Preferred (Not Required) Aerospace manufacturing experience Experience with surface grinding or precision grinding operations Familiarity with Fanuc controls Why Machinists Like Working Here Machinists choose Barnes Aerospace because: Stable aerospace programs with long-term work Clean, organized, and professional shop environment Advanced precision work on critical components Competitive pay plus 15% shift differential Overtime available but not required Strong benefits package and career growth opportunities Pay, Benefits & Schedule Pay Range: $28 - $38/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available, but not required Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $90,000 - $110,000 per year (based on experience) Shift: 1st Shift Monday-Friday Overtime: As needed Experience Level: Senior (5+ years CNC process / manufacturing engineering) Why This Role Exists This role exists to support ongoing aerospace production programs by developing, optimizing, and sustaining CNC machining processes across milling, turning, and grinding operations. At Barnes Aerospace, this position plays a critical role in bridging engineering and production to ensure efficient, repeatable, and high-quality manufacturing outcomes. The Work You'll Be Doing In this role, you will: Own and support CNC machining processes from concept through production Develop and optimize CNC programs for multi-axis milling, turning, and grinding operations Select tooling and cutting strategies to maximize efficiency, quality, and tool life Design and implement fixtures and workholding solutions to improve repeatability and throughput Work directly with machinists and production leads to resolve issues in real time Provide hands-on shop floor support for setups, prove-outs, and process validation Drive material review board (MRB) activities and implement corrective actions Collaborate with quality, lab engineers, and production teams to meet technical and customer requirements Support continuous improvement initiatives and Lean manufacturing efforts Machines, Controls & Software You'll work with and support: Machines: Multi-axis CNC milling machines, CNC lathes, and grinding equipment Controls: Fanuc and other CNC controls depending on equipment CAM Software: NX, Mastercam, or similar CAM platforms CAD/Engineering Tools: CAD modeling and process validation tools Inspection Tools: Standard precision inspection equipment and quality systems Materials You'll Work With Titanium Inconel Stainless Steel Other aerospace alloys What We're Looking ForRequired 5+ years of CNC process engineering or manufacturing engineering experience Hands-on experience with multi-axis machining (milling, turning, and/or grinding) Strong knowledge of CNC programming, tooling selection, and machining strategy Experience designing fixtures and workholding solutions Ability to read and interpret complex blueprints and GD&T Experience working directly with production teams in a fast-paced environment Strong organizational, communication, and problem-solving skills Experience with CAD/CAM systems Preferred (Not Required) Aerospace manufacturing experience Lean manufacturing experience Bachelor's degree in Engineering or related field Why Engineers Like Working Here Engineers choose Barnes Aerospace because: High-impact role with direct influence on production performance Opportunity to work on complex aerospace machining processes Strong collaboration between engineering and shop floor teams Stable, long-term aerospace programs Clean, structured, and safety-focused environment Opportunities for career growth and technical development Pay, Benefits & Schedule Pay Range: $90,000 - $110,000 per year (DOE) Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 1st Shift Overtime as needed Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.
06/14/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $90,000 - $110,000 per year (based on experience) Shift: 1st Shift Monday-Friday Overtime: As needed Experience Level: Senior (5+ years CNC process / manufacturing engineering) Why This Role Exists This role exists to support ongoing aerospace production programs by developing, optimizing, and sustaining CNC machining processes across milling, turning, and grinding operations. At Barnes Aerospace, this position plays a critical role in bridging engineering and production to ensure efficient, repeatable, and high-quality manufacturing outcomes. The Work You'll Be Doing In this role, you will: Own and support CNC machining processes from concept through production Develop and optimize CNC programs for multi-axis milling, turning, and grinding operations Select tooling and cutting strategies to maximize efficiency, quality, and tool life Design and implement fixtures and workholding solutions to improve repeatability and throughput Work directly with machinists and production leads to resolve issues in real time Provide hands-on shop floor support for setups, prove-outs, and process validation Drive material review board (MRB) activities and implement corrective actions Collaborate with quality, lab engineers, and production teams to meet technical and customer requirements Support continuous improvement initiatives and Lean manufacturing efforts Machines, Controls & Software You'll work with and support: Machines: Multi-axis CNC milling machines, CNC lathes, and grinding equipment Controls: Fanuc and other CNC controls depending on equipment CAM Software: NX, Mastercam, or similar CAM platforms CAD/Engineering Tools: CAD modeling and process validation tools Inspection Tools: Standard precision inspection equipment and quality systems Materials You'll Work With Titanium Inconel Stainless Steel Other aerospace alloys What We're Looking ForRequired 5+ years of CNC process engineering or manufacturing engineering experience Hands-on experience with multi-axis machining (milling, turning, and/or grinding) Strong knowledge of CNC programming, tooling selection, and machining strategy Experience designing fixtures and workholding solutions Ability to read and interpret complex blueprints and GD&T Experience working directly with production teams in a fast-paced environment Strong organizational, communication, and problem-solving skills Experience with CAD/CAM systems Preferred (Not Required) Aerospace manufacturing experience Lean manufacturing experience Bachelor's degree in Engineering or related field Why Engineers Like Working Here Engineers choose Barnes Aerospace because: High-impact role with direct influence on production performance Opportunity to work on complex aerospace machining processes Strong collaboration between engineering and shop floor teams Stable, long-term aerospace programs Clean, structured, and safety-focused environment Opportunities for career growth and technical development Pay, Benefits & Schedule Pay Range: $90,000 - $110,000 per year (DOE) Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 1st Shift Overtime as needed Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $26 - $36 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Level (3+ years maintenance experience) Why This Role Exists This role exists to support continuous production by maintaining and repairing CNC machines and facility equipment. At Barnes Aerospace, this position plays a critical role in minimizing downtime, improving machine performance, and ensuring manufacturing operations run safely and efficiently. The Work You'll Be Doing In this role, you will: Perform mechanical, electrical, hydraulic, and pneumatic repairs on CNC machines and facility equipment Troubleshoot machine tool issues and identify root causes of failures Maintain and repair multi-axis CNC machines, including up to 5-axis equipment Perform preventative maintenance (PM) tasks and support scheduling of maintenance activities Read and interpret machine manuals, diagrams, and technical documentation Work closely with production, quality, and engineering teams to keep equipment running reliably Perform machine leveling, alignment, and accuracy checks Replace and repair machine components such as linear guides, ball screws, and other mechanical systems Support continuous improvement of maintenance procedures and PM schedules Coordinate with external vendors and service providers as needed Respond to urgent machine-down situations with a strong sense of urgency Support general facility maintenance as required Machines, Controls & Equipment You'll work with equipment such as: Machines: Multi-axis CNC mills, lathes, and other production equipment (up to 5-axis) Controls: Fanuc and other OEM machine controllers Systems: Hydraulic, pneumatic, electrical, and mechanical systems Tools: Hand tools, power tools, diagnostic equipment Materials You'll Work With CNC machine components and assemblies Mechanical and electrical systems within manufacturing equipment What We're Looking ForRequired 3+ years of maintenance or machine repair experience in a manufacturing environment Basic knowledge of hydraulic, pneumatic, mechanical, and electrical systems Strong troubleshooting and problem-solving skills Ability to read blueprints, diagrams, and technical documentation Experience working with CNC machines and production equipment Strong communication skills and ability to work across teams Basic computer skills Preferred (Not Required) Experience maintaining multi-axis CNC machines (3, 4, or 5-axis) Familiarity with OEM machine controls (Fanuc or similar) Experience with preventative maintenance systems and scheduling Experience with CNC probing systems Why Technicians Like Working Here Maintenance technicians choose Barnes Aerospace because: Stable aerospace manufacturing environment Opportunity to work on advanced CNC equipment Strong team collaboration across departments Competitive pay with 15% shift differential Overtime opportunities available Long-term career stability with a strong benefits package Pay, Benefits & Schedule Pay Range: $26 - $36/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.
06/14/2026
Full time
At a Glance Company: Barnes Aerospace Location: East Hartford, CT 06108 (on-site) Job Type: Full-Time Pay Range: $26 - $36 per hour (based on experience) Shift: 2nd Shift Monday-Friday 3:30 PM - 12:00 AM Shift Differential: % for 2nd shift Overtime: Available Experience Level: Mid-Level (3+ years maintenance experience) Why This Role Exists This role exists to support continuous production by maintaining and repairing CNC machines and facility equipment. At Barnes Aerospace, this position plays a critical role in minimizing downtime, improving machine performance, and ensuring manufacturing operations run safely and efficiently. The Work You'll Be Doing In this role, you will: Perform mechanical, electrical, hydraulic, and pneumatic repairs on CNC machines and facility equipment Troubleshoot machine tool issues and identify root causes of failures Maintain and repair multi-axis CNC machines, including up to 5-axis equipment Perform preventative maintenance (PM) tasks and support scheduling of maintenance activities Read and interpret machine manuals, diagrams, and technical documentation Work closely with production, quality, and engineering teams to keep equipment running reliably Perform machine leveling, alignment, and accuracy checks Replace and repair machine components such as linear guides, ball screws, and other mechanical systems Support continuous improvement of maintenance procedures and PM schedules Coordinate with external vendors and service providers as needed Respond to urgent machine-down situations with a strong sense of urgency Support general facility maintenance as required Machines, Controls & Equipment You'll work with equipment such as: Machines: Multi-axis CNC mills, lathes, and other production equipment (up to 5-axis) Controls: Fanuc and other OEM machine controllers Systems: Hydraulic, pneumatic, electrical, and mechanical systems Tools: Hand tools, power tools, diagnostic equipment Materials You'll Work With CNC machine components and assemblies Mechanical and electrical systems within manufacturing equipment What We're Looking ForRequired 3+ years of maintenance or machine repair experience in a manufacturing environment Basic knowledge of hydraulic, pneumatic, mechanical, and electrical systems Strong troubleshooting and problem-solving skills Ability to read blueprints, diagrams, and technical documentation Experience working with CNC machines and production equipment Strong communication skills and ability to work across teams Basic computer skills Preferred (Not Required) Experience maintaining multi-axis CNC machines (3, 4, or 5-axis) Familiarity with OEM machine controls (Fanuc or similar) Experience with preventative maintenance systems and scheduling Experience with CNC probing systems Why Technicians Like Working Here Maintenance technicians choose Barnes Aerospace because: Stable aerospace manufacturing environment Opportunity to work on advanced CNC equipment Strong team collaboration across departments Competitive pay with 15% shift differential Overtime opportunities available Long-term career stability with a strong benefits package Pay, Benefits & Schedule Pay Range: $26 - $36/hr (DOE) Pay Notes: 15% shift differential for 2nd shift Benefits: Medical, dental, and vision insurance starting the 1st of the month following start date 401(k) with 50% match on the first 6% 4% retirement contribution deposited into the 401(k) plan Quarterly incentive opportunities Yearly performance bonus 100% education reimbursement after 1 year PTO: 2 weeks in year one plus 4 floating holidays Flex time program Discounted membership Discounted Calm app membership Schedule: Monday-Friday 2nd Shift 3:30 PM - 12:00 AM Overtime available Apply Interested candidates can apply directly through hireCNC. Apply now or save this job to come back later.