DUTIES, TASKS, AND RESPONSIBILITIES Software / CAD (40%) Produce plumbing and mechanical designs based on client and company specifications using CAD software Produce dimensioned plans for single family projects to be used by field teams for construction. Project Design (30%) Comprehensively create material lists of all necessary materials for each design Identify plumbing needs for different fixtures being used in the design and accurately placing drains for these fixtures. Consistently place fixture drain and water line points in locations per RTM Standard practices. Accurately place HVAC diffusers and equipment Information Gathering (15%) Carefully review and understand builder documents associated with each project and correctly interpret builder options to accurately complete designs. Understand plumbing and HVAC code requirements to ensure designs are code compliant Communication (15%) Clearly communicate with other trades, architects, general contractors, field engineers, project managers, field staff, and relevant internal departments such as estimating, to ensure applicable information is captured and all individuals are kept abreast of project progress Correctly use project management software to coordinate with internal team POSITION COMPETENCIES Task-Focused Communicator - Communication with others is dedicated to work knowledge and providing or gathering specific information to others Accurate - Performs all duties with precision and skilled expertise to ensure high quality Task Oriented - Confidently completes all tasks successively, correctly, and following known priorities Consistent - Patiently takes the time to do work steadily and with high accuracy Detailed Expert - Skillfully works within well-defined parameters with repeatable, successful results CRITICAL SKILLS & KNOWLEDGE Clear, effective communications skills - both written and verbal Good ability to collaborate and incorporate multiple perspectives into work product Aptitude for prioritizing and problem-solving Preference for accuracy, attention to detail, and organization Mastery of entire Microsoft Suite plus Internet and email Experienced in AutoCAD or other related software Ability to utilize Autodesk Design Review and Bluebeam software A high school diploma or GED is required, Associate or Bachelor degree preferred 2 years CAD design software experience Basic construction knowledge required WORKING CONDITIONS Well-lighted, heated and/or air-conditioned indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance Sedentary physical activity performing non-strenuous daily activities of an administrative nature Must be capable of lifting up to 10 pounds No overnight travel required; some local travel required This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor. R.T. Moore is an Equal Opportunity Employer Education Preferred Bachelors or better in Design and Mechanical Systems or related field Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
08/05/2026
Full time
DUTIES, TASKS, AND RESPONSIBILITIES Software / CAD (40%) Produce plumbing and mechanical designs based on client and company specifications using CAD software Produce dimensioned plans for single family projects to be used by field teams for construction. Project Design (30%) Comprehensively create material lists of all necessary materials for each design Identify plumbing needs for different fixtures being used in the design and accurately placing drains for these fixtures. Consistently place fixture drain and water line points in locations per RTM Standard practices. Accurately place HVAC diffusers and equipment Information Gathering (15%) Carefully review and understand builder documents associated with each project and correctly interpret builder options to accurately complete designs. Understand plumbing and HVAC code requirements to ensure designs are code compliant Communication (15%) Clearly communicate with other trades, architects, general contractors, field engineers, project managers, field staff, and relevant internal departments such as estimating, to ensure applicable information is captured and all individuals are kept abreast of project progress Correctly use project management software to coordinate with internal team POSITION COMPETENCIES Task-Focused Communicator - Communication with others is dedicated to work knowledge and providing or gathering specific information to others Accurate - Performs all duties with precision and skilled expertise to ensure high quality Task Oriented - Confidently completes all tasks successively, correctly, and following known priorities Consistent - Patiently takes the time to do work steadily and with high accuracy Detailed Expert - Skillfully works within well-defined parameters with repeatable, successful results CRITICAL SKILLS & KNOWLEDGE Clear, effective communications skills - both written and verbal Good ability to collaborate and incorporate multiple perspectives into work product Aptitude for prioritizing and problem-solving Preference for accuracy, attention to detail, and organization Mastery of entire Microsoft Suite plus Internet and email Experienced in AutoCAD or other related software Ability to utilize Autodesk Design Review and Bluebeam software A high school diploma or GED is required, Associate or Bachelor degree preferred 2 years CAD design software experience Basic construction knowledge required WORKING CONDITIONS Well-lighted, heated and/or air-conditioned indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance Sedentary physical activity performing non-strenuous daily activities of an administrative nature Must be capable of lifting up to 10 pounds No overnight travel required; some local travel required This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor. R.T. Moore is an Equal Opportunity Employer Education Preferred Bachelors or better in Design and Mechanical Systems or related field Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
DUTIES, TASKS, AND RESPONSIBILITIES Software / CAD (40%) Expertly manage multiple design projects simultaneously using CAD software to produce plumbing and mechanical designs based on client and company specifications Consistently create pre-fab drawings and state, permit, and construction documents according to set timelines and expectations Project Design (30%) Accurately evaluate engineer drawings to identify opportunities to create a more efficient, cost-effective, code compliant design Precisely calculate detailed heat loads, ductwork sizes, piping, and plumbing sizes for each design Comprehensively create material lists of all necessary materials for each design Methodically generate fixture and equipment schedules to ensure each project is completed on deadline Consistently model plumbing & ductwork per code and RTM standard practices Information Gathering (15%) Carefully review and understand structural documents associated with each design and correctly interpret plumbing and HVAC code requirements to ensure designs are code compliant Thoroughly understand submittal packages and utilize in design decisions Attend and hold meetings as necessary to understand scope of project Communication (15%) Clearly communicate with other trades, architects, general contractors, field engineers, project managers, field staff, and relevant internal departments such as estimating, to ensure applicable information is captured and all individuals are kept abreast of project progress Diligently gather and apply multiple perspectives on design options and ask appropriate questions of each party to determine scope of project work Correctly use project management software to coordinate with internal team POSITION COMPETENCIES Task-Focused Communicator - Communication with others is dedicated to work knowledge and providing or gathering specific information to others Accurate - Performs all duties with precision and skilled expertise to ensure high quality Task Oriented - Confidently completes all tasks successively, correctly, and following known priorities Consistent - Patiently takes the time to do work steadily and with high accuracy Detailed Expert - Skillfully works within well-defined parameters with repeatable, successful results CRITICAL SKILLS & KNOWLEDGE Clear, effective communications skills - both written and verbal Good ability to collaborate and incorporate multiple perspectives into work product Aptitude for prioritizing and problem-solving Preference for accuracy, attention to detail, and organization Mastery of entire Microsoft Suite plus Internet and email Experienced in AutoCAD and Revit Ability to utilize Revit, Navisworks, Design Review and Bluebeam software A high school diploma or GED is required, Associate or Bachelor degree preferred 4 years CAD design software experience Basic construction knowledge required WORKING CONDITIONS Well-lighted, heated and/or air-conditioned indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance Sedentary physical activity performing non-strenuous daily activities of an administrative nature Must be capable of lifting up to 10 pounds No overnight travel required; some local travel required This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor. R.T. Moore is an Equal Opportunity Employer Education Required High School or better Licenses & Certifications Required Valid Driver's License Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
08/05/2026
Full time
DUTIES, TASKS, AND RESPONSIBILITIES Software / CAD (40%) Expertly manage multiple design projects simultaneously using CAD software to produce plumbing and mechanical designs based on client and company specifications Consistently create pre-fab drawings and state, permit, and construction documents according to set timelines and expectations Project Design (30%) Accurately evaluate engineer drawings to identify opportunities to create a more efficient, cost-effective, code compliant design Precisely calculate detailed heat loads, ductwork sizes, piping, and plumbing sizes for each design Comprehensively create material lists of all necessary materials for each design Methodically generate fixture and equipment schedules to ensure each project is completed on deadline Consistently model plumbing & ductwork per code and RTM standard practices Information Gathering (15%) Carefully review and understand structural documents associated with each design and correctly interpret plumbing and HVAC code requirements to ensure designs are code compliant Thoroughly understand submittal packages and utilize in design decisions Attend and hold meetings as necessary to understand scope of project Communication (15%) Clearly communicate with other trades, architects, general contractors, field engineers, project managers, field staff, and relevant internal departments such as estimating, to ensure applicable information is captured and all individuals are kept abreast of project progress Diligently gather and apply multiple perspectives on design options and ask appropriate questions of each party to determine scope of project work Correctly use project management software to coordinate with internal team POSITION COMPETENCIES Task-Focused Communicator - Communication with others is dedicated to work knowledge and providing or gathering specific information to others Accurate - Performs all duties with precision and skilled expertise to ensure high quality Task Oriented - Confidently completes all tasks successively, correctly, and following known priorities Consistent - Patiently takes the time to do work steadily and with high accuracy Detailed Expert - Skillfully works within well-defined parameters with repeatable, successful results CRITICAL SKILLS & KNOWLEDGE Clear, effective communications skills - both written and verbal Good ability to collaborate and incorporate multiple perspectives into work product Aptitude for prioritizing and problem-solving Preference for accuracy, attention to detail, and organization Mastery of entire Microsoft Suite plus Internet and email Experienced in AutoCAD and Revit Ability to utilize Revit, Navisworks, Design Review and Bluebeam software A high school diploma or GED is required, Associate or Bachelor degree preferred 4 years CAD design software experience Basic construction knowledge required WORKING CONDITIONS Well-lighted, heated and/or air-conditioned indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance Sedentary physical activity performing non-strenuous daily activities of an administrative nature Must be capable of lifting up to 10 pounds No overnight travel required; some local travel required This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor. R.T. Moore is an Equal Opportunity Employer Education Required High School or better Licenses & Certifications Required Valid Driver's License Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Come join our team as a Design Engineer! The position of Design Engineer is critical to providing high quality HVAC, Plumbing system designs and construction drawings that maximize installation efficiency and provide long-term value to our customers. RESPONSIBILITIES Design of plumbing systems in Multi-family, Single Family, and light commercial buildings Storm sizing Sanitary sizing Domestic water sizing Gas pipe Sizing HVAC systems design in Multi-family, Single Family, and light commercial buildings Designing and selection of HVAC equipment Calculate project heating, cooling, and ventilation loads Mechanical ventilation calculations Effectively design using applicable code requirements that effect HVAC and Plumbing Systems Coordinate Plumbing and HVAC system design with other design disciplines throughout design and construction phase of the project Maintain and communicate mechanical design through production of construction documents utilizing Revit and AutoCAD Effectively communicate with RTMC customers to understand their requirements and intent Proactively keep customers advised on project progress Work cooperatively in a positive, professional manner with in-house design team members as well as interface with other engineering disciplines, architects, owners, and customers. Maintain accurate mechanical and plumbing documents during construction process and effectively communicate all changes to field personnel Attend design and coordination meetings as well as perform site and field inspections QUALIFICATIONS Ability to work cooperatively in a positive, professional manner with in-house design staff as well as interface with other engineering disciplines, architects, owners, and clients. Strong work ethic and a drive to exceed client expectations. Proactive and assertive in problem solving. Experience managing parallel assignments and competing priorities. Aptitude to problem solve given resources and knowledge base within the company Ability to meet fast-paced deadlines while maintaining a high precision quality design. Strong experience preparing construction documents using discipline specific software (i.e., Revit, AutoCAD, RHVAC or Trane Trace, etc.). Full production modeling is not required. Good written, oral communications, staff management and client relationship skills. Ability to enter data accurately and efficiently Punctual and reliable with ability to focus and attend to details when necessary Proficient in using basic office equipment Mastery of entire Microsoft Suite plus Internet and email Ability to investigate, gather information, and be self-sufficient and organized Bachelor's Degree in Mechanical Engineering (or similar degree) 3-5 years relevant experience in HVAC and/or Plumbing Design preferred Professional Engineering (PE) License preferred, but not required SCHEDULE: Monday to Friday LOCATION: On-site SALARY/HOURLY RATE: Salary Exempt BENEFITS Medical Dental Vision Short- & long-term disability Accrued PTO Paid holidays 401(K) Profit sharing Weekly pay, 401K, Medical, Dental, and Vision Indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
08/05/2026
Full time
Come join our team as a Design Engineer! The position of Design Engineer is critical to providing high quality HVAC, Plumbing system designs and construction drawings that maximize installation efficiency and provide long-term value to our customers. RESPONSIBILITIES Design of plumbing systems in Multi-family, Single Family, and light commercial buildings Storm sizing Sanitary sizing Domestic water sizing Gas pipe Sizing HVAC systems design in Multi-family, Single Family, and light commercial buildings Designing and selection of HVAC equipment Calculate project heating, cooling, and ventilation loads Mechanical ventilation calculations Effectively design using applicable code requirements that effect HVAC and Plumbing Systems Coordinate Plumbing and HVAC system design with other design disciplines throughout design and construction phase of the project Maintain and communicate mechanical design through production of construction documents utilizing Revit and AutoCAD Effectively communicate with RTMC customers to understand their requirements and intent Proactively keep customers advised on project progress Work cooperatively in a positive, professional manner with in-house design team members as well as interface with other engineering disciplines, architects, owners, and customers. Maintain accurate mechanical and plumbing documents during construction process and effectively communicate all changes to field personnel Attend design and coordination meetings as well as perform site and field inspections QUALIFICATIONS Ability to work cooperatively in a positive, professional manner with in-house design staff as well as interface with other engineering disciplines, architects, owners, and clients. Strong work ethic and a drive to exceed client expectations. Proactive and assertive in problem solving. Experience managing parallel assignments and competing priorities. Aptitude to problem solve given resources and knowledge base within the company Ability to meet fast-paced deadlines while maintaining a high precision quality design. Strong experience preparing construction documents using discipline specific software (i.e., Revit, AutoCAD, RHVAC or Trane Trace, etc.). Full production modeling is not required. Good written, oral communications, staff management and client relationship skills. Ability to enter data accurately and efficiently Punctual and reliable with ability to focus and attend to details when necessary Proficient in using basic office equipment Mastery of entire Microsoft Suite plus Internet and email Ability to investigate, gather information, and be self-sufficient and organized Bachelor's Degree in Mechanical Engineering (or similar degree) 3-5 years relevant experience in HVAC and/or Plumbing Design preferred Professional Engineering (PE) License preferred, but not required SCHEDULE: Monday to Friday LOCATION: On-site SALARY/HOURLY RATE: Salary Exempt BENEFITS Medical Dental Vision Short- & long-term disability Accrued PTO Paid holidays 401(K) Profit sharing Weekly pay, 401K, Medical, Dental, and Vision Indoor office setting Moderately noisy environment with light traffic, office equipment, and guest entrance It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Come join our team as a Plumber I! We're currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures. Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings. Ensure adherence to safety and quality of work standards. Deliberately manage materials needed for various projects. Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days. Precisely and regularly maintain a clean and organized jobsite. Thoughtfully follow directions and processes given by site leadership. Enthusiastically motivated to learn the plumbing trade. Maintain compliance with state trade licensing programs. Build knowledge of Plumbing Code. Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic. Clear verbal communication skills. Basic mathematical ability including addition, subtraction, multiplication, and division. Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings. Critical thinking skills and ability to problem solve independently. A high school diploma or GED is required. Valid driver license is required. Obtain apprentice licensing in appropriate states. Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat. The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces. There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations. Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear. Must be able to climb or balance regularly. Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion. Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials. Wear job site-specific personal protective equipment and be able to lift at least 50 pounds. Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS Medical Dental Vision Short- & long-term disability Accrued PTO Paid holidays 401(K) Profit sharing It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer d by their supervisor. Education Preferred High School or better Licenses & Certifications Preferred Valid Driver's License Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
08/04/2026
Full time
Come join our team as a Plumber I! We're currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures. Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings. Ensure adherence to safety and quality of work standards. Deliberately manage materials needed for various projects. Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days. Precisely and regularly maintain a clean and organized jobsite. Thoughtfully follow directions and processes given by site leadership. Enthusiastically motivated to learn the plumbing trade. Maintain compliance with state trade licensing programs. Build knowledge of Plumbing Code. Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic. Clear verbal communication skills. Basic mathematical ability including addition, subtraction, multiplication, and division. Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings. Critical thinking skills and ability to problem solve independently. A high school diploma or GED is required. Valid driver license is required. Obtain apprentice licensing in appropriate states. Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat. The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces. There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations. Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear. Must be able to climb or balance regularly. Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion. Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials. Wear job site-specific personal protective equipment and be able to lift at least 50 pounds. Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS Medical Dental Vision Short- & long-term disability Accrued PTO Paid holidays 401(K) Profit sharing It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer d by their supervisor. Education Preferred High School or better Licenses & Certifications Preferred Valid Driver's License Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Come join our team as a Plumber II The position of Plumber II is critical to the successful installation of new construction plumbing while maintaining responsibility for the safety and quality of work done by apprentice plumbers. RESPONSIBILITIES Precisely install and run drain-waste-vent (DWV), water lines, tub sets, gas line installations, and pump installations according to code and up to quality standards of the company. Thoroughly understand and apply state code in all projects without fail. Correctly read and interpret job site prints and builder start packs. Helpfully provide direction, guidance, and feedback to apprentices and invest in the training and development of all apprentices by taking time to answer questions and share insight. Deliberately stock, stage, and layout for each project by taking time to diligently prepare by reading plans, gathering materials, taking walk-throughs to prepare for all aspects of the project. Patiently organize and clean jobsite and truck each day to maintain professional appearance and accurate maintenance and tracking of all materials. Maintain excellent attendance and punctuality to adhere to work schedule. Ensure adherence to safety and quality of work standards. Reliably live out company core values daily including taking pride in one's work by demonstrating first time quality work. Harmoniously build relationships with team members across all trades on each job site. Willingly demonstrate excellent work ethic to all trainees and apprentices. Cooperatively communicate with superintendent daily at the morning huddle and all members of the team, including other trades, as project needs dictate. Accurately complete all paperwork in a timely fashion to meet any deadlines for documents including time sheets, process job folders, and punch sheets. QUALIFICATIONS Motivated work ethic. Clear verbal communication skills. Basic mathematical ability including addition, subtraction, multiplication, and division. Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings. Critical thinking skills and ability to problem solve independently. A high school diploma or GED is required Obtain apprentice licensing in appropriate state National / Local Plumbing Code It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
08/04/2026
Full time
Come join our team as a Plumber II The position of Plumber II is critical to the successful installation of new construction plumbing while maintaining responsibility for the safety and quality of work done by apprentice plumbers. RESPONSIBILITIES Precisely install and run drain-waste-vent (DWV), water lines, tub sets, gas line installations, and pump installations according to code and up to quality standards of the company. Thoroughly understand and apply state code in all projects without fail. Correctly read and interpret job site prints and builder start packs. Helpfully provide direction, guidance, and feedback to apprentices and invest in the training and development of all apprentices by taking time to answer questions and share insight. Deliberately stock, stage, and layout for each project by taking time to diligently prepare by reading plans, gathering materials, taking walk-throughs to prepare for all aspects of the project. Patiently organize and clean jobsite and truck each day to maintain professional appearance and accurate maintenance and tracking of all materials. Maintain excellent attendance and punctuality to adhere to work schedule. Ensure adherence to safety and quality of work standards. Reliably live out company core values daily including taking pride in one's work by demonstrating first time quality work. Harmoniously build relationships with team members across all trades on each job site. Willingly demonstrate excellent work ethic to all trainees and apprentices. Cooperatively communicate with superintendent daily at the morning huddle and all members of the team, including other trades, as project needs dictate. Accurately complete all paperwork in a timely fashion to meet any deadlines for documents including time sheets, process job folders, and punch sheets. QUALIFICATIONS Motivated work ethic. Clear verbal communication skills. Basic mathematical ability including addition, subtraction, multiplication, and division. Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings. Critical thinking skills and ability to problem solve independently. A high school diploma or GED is required Obtain apprentice licensing in appropriate state National / Local Plumbing Code It's time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.