HWX Enterprises
Palmdale, California
Maintenance Technician Responsibilities will include: Ability to work SAFELY by following policies and procedures in an industrial / manufacturing environment. Basic troubleshooting, maintaining, and repairing pneumatic, hydraulic, electrical, and Mechanical equipment in an industrial setting. Ability to perform preventative and corrective inspections Maintenance in a team atmosphere. Maintain an inspection and servicing schedule of all tools within the facilities. Ability to read and implement manuals, schematics and diagrams. Inspecting, troubleshooting, and/or replacing mechanical components. Inspecting, troubleshooting, and/or replacing parts. DUTIES: Perform routine maintenance work Perform unskilled manual labor in a safe and timely period. Assists in preventive and predictive maintenance as directed by supervision. Assists in all adjustment of equipment systems with view toward conserving energy. Skilled in the use of common hand tools and a variety of power tools and motorized machinery. Clean and prepare equipment and areas for inspections. Maintain cleaning and service logs on all equipment; record, correct, and report all deficiencies and other unusual occurrences. Ability to read blue prints and diagrams, sketches, operation manuals, and manufacturer's specifications, on use of equipment and materials. Perform all duties in a safe manner following all safety procedures and maintain a clean work area. Comply with all company policies and procedures and adhere to company standards. o Must be a team player committed to work in a quality environment. Willingly perform other miscellaneous job-related duties as requested, including all general building maintenance activities. SKILLS / QUALIFICATIONS: High School diploma or GED, or two (2) years or equivalent work experience. Ability to use a wide variety of hand and power tools. Certification with all mobile equipment. Requires working in confining spaces, on a ladder, lifting equipment over six (6) feet above ground, and physical exertion. Must be able to work as needed including various shifts, weekends, holidays, and overtime. Valid Driver's License. Disclaimer: the duties and responsibilities of position may change as need arises. The employee will be notified of change. Relevant work experience may also be substituted for education or certification, at company's discretion. Position Type Full-Time/Regular Ability to work any shift (1st, 2nd, 3rd, or weekends). Valid Driver's License Employment offer is contingent on employee passing a pre-employment drug screen / background check. Successful completion of online safety training prior to start date. Must be a U.S. Citizen. HWX is an Equal Opportunity Employer
Maintenance Technician Responsibilities will include: Ability to work SAFELY by following policies and procedures in an industrial / manufacturing environment. Basic troubleshooting, maintaining, and repairing pneumatic, hydraulic, electrical, and Mechanical equipment in an industrial setting. Ability to perform preventative and corrective inspections Maintenance in a team atmosphere. Maintain an inspection and servicing schedule of all tools within the facilities. Ability to read and implement manuals, schematics and diagrams. Inspecting, troubleshooting, and/or replacing mechanical components. Inspecting, troubleshooting, and/or replacing parts. DUTIES: Perform routine maintenance work Perform unskilled manual labor in a safe and timely period. Assists in preventive and predictive maintenance as directed by supervision. Assists in all adjustment of equipment systems with view toward conserving energy. Skilled in the use of common hand tools and a variety of power tools and motorized machinery. Clean and prepare equipment and areas for inspections. Maintain cleaning and service logs on all equipment; record, correct, and report all deficiencies and other unusual occurrences. Ability to read blue prints and diagrams, sketches, operation manuals, and manufacturer's specifications, on use of equipment and materials. Perform all duties in a safe manner following all safety procedures and maintain a clean work area. Comply with all company policies and procedures and adhere to company standards. o Must be a team player committed to work in a quality environment. Willingly perform other miscellaneous job-related duties as requested, including all general building maintenance activities. SKILLS / QUALIFICATIONS: High School diploma or GED, or two (2) years or equivalent work experience. Ability to use a wide variety of hand and power tools. Certification with all mobile equipment. Requires working in confining spaces, on a ladder, lifting equipment over six (6) feet above ground, and physical exertion. Must be able to work as needed including various shifts, weekends, holidays, and overtime. Valid Driver's License. Disclaimer: the duties and responsibilities of position may change as need arises. The employee will be notified of change. Relevant work experience may also be substituted for education or certification, at company's discretion. Position Type Full-Time/Regular Ability to work any shift (1st, 2nd, 3rd, or weekends). Valid Driver's License Employment offer is contingent on employee passing a pre-employment drug screen / background check. Successful completion of online safety training prior to start date. Must be a U.S. Citizen. HWX is an Equal Opportunity Employer
HWX Enterprises
Lake Orion, Michigan
SUMMARY OF POSITION The CNC Maintenance Technician works with all elements involved in maintaining CNC machines to OEM standards. This involves overseeing the health of all CNC machines and participating in TPM events. Provide detailed reports on all work orders. ESSENTIAL FUNCTIONS This document in no way states or implies that these are the only duties to be performed by the employee occupying the position. Replace Spindles when needed. Perform Preventative Maintenance (PM's) per schedule. Responsible to maintain all systems on CNC machines. Troubleshoot and maintain Chiller systems, A/C Systems, and Hydraulic systems. Rebuild Rotary Heads and Gearboxes. Square up and realign 5-axis CNC Machines. Provide reports and documentation of repairs. Research problems with machine manufacturer as needed. Adherence to 6S System. Any additional duties as reasonably assigned by management. REQUIRED SKILLS, EDUCATION, AND EXPERIENCE Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered. Typical qualifications would be: High school diploma or GED. 5+ years of experience in a manufacturing/maintenance environment. 6+ months of scheduling and report experience. Problem solving ability in a machine shop environment. Excellent verbal and written communication skills. This position must meet Export Control Compliance requirements, therefore a "U.S. Person" as defined by 22.C.F.R. is required. For further details as to how a "U.S. Person" is determined, please see SPECIAL REQUIREMENTS below! PREFERRED QUALIFICATIONS Have a high degree of leadership and broad interpersonal skills. Able to read machine schematics and blueprints. Able to follow and instruct written and verbal instructions. Excellent Safety record and training. Able to foresee technical and machining problems in the manufacturing environment. Able to work varied shifts, overtime, and weekends when necessary. Experience and proficiency in the following areas: Automated controls Electrical and electronic principles Knowledge of CMMS programs Preventative maintenance procedures Industrial electrical and industrial PC literacy Department of Defense Secret Security Clearance: Though not required of this role, individuals that have current, previous, or are willing to go through the process to obtain and maintain during the duration of employment are preferred. SUPERVISORY RESPONSIBILITY No TRAVEL REQUIREMENTS May be required to travel to other site locations during the workday and would primarily be local during the business day. However, some projects may require overnight stays as well as out-of-the-area travel paid for by the business. WORKING CONDITIONS Working conditions described here are representative of those that may be experienced by an employee daily while performing the functions of this job. While performing the duties of this job, employee may be exposed to moving mechanical parts, fumes, airborne particles, caustic chemicals, vibration, and moderate noise level. May be required to work overtime or weekends to meet department and business demands. Will be working in the manufacturing plant, and therefore must be able to wear the necessary personal protective gear (PPE) for most, if not all, of the working day provided for individuals by the business. Most common PPE includes safety shoes, eye protection, and hearing protection. More specialized positions may require PPE specific to hard hats, gloves, face shield / helmet, fall protection, protective clothing, and powered air-purifying respirator (PAPR). Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must be able to sit, climb, balance, stoop, kneel, crouch or crawl. Must be able to see, talk, hear, touch, feel and reach with hands and arms. Must be able to frequently walk & stand for short periods of time Must be able to lift and move up to 35 pounds, occasionally lift and move objects up to 50lbs. Special Requirements Employment is contingent upon successfully passing an employee reference check, criminal background check, and drug screening. This position requires use of information that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'). HWX is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status or a person's relationship or association with a protected veteran, including spouses and other family members, and will not be discriminated against on the basis of disability.
SUMMARY OF POSITION The CNC Maintenance Technician works with all elements involved in maintaining CNC machines to OEM standards. This involves overseeing the health of all CNC machines and participating in TPM events. Provide detailed reports on all work orders. ESSENTIAL FUNCTIONS This document in no way states or implies that these are the only duties to be performed by the employee occupying the position. Replace Spindles when needed. Perform Preventative Maintenance (PM's) per schedule. Responsible to maintain all systems on CNC machines. Troubleshoot and maintain Chiller systems, A/C Systems, and Hydraulic systems. Rebuild Rotary Heads and Gearboxes. Square up and realign 5-axis CNC Machines. Provide reports and documentation of repairs. Research problems with machine manufacturer as needed. Adherence to 6S System. Any additional duties as reasonably assigned by management. REQUIRED SKILLS, EDUCATION, AND EXPERIENCE Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered. Typical qualifications would be: High school diploma or GED. 5+ years of experience in a manufacturing/maintenance environment. 6+ months of scheduling and report experience. Problem solving ability in a machine shop environment. Excellent verbal and written communication skills. This position must meet Export Control Compliance requirements, therefore a "U.S. Person" as defined by 22.C.F.R. is required. For further details as to how a "U.S. Person" is determined, please see SPECIAL REQUIREMENTS below! PREFERRED QUALIFICATIONS Have a high degree of leadership and broad interpersonal skills. Able to read machine schematics and blueprints. Able to follow and instruct written and verbal instructions. Excellent Safety record and training. Able to foresee technical and machining problems in the manufacturing environment. Able to work varied shifts, overtime, and weekends when necessary. Experience and proficiency in the following areas: Automated controls Electrical and electronic principles Knowledge of CMMS programs Preventative maintenance procedures Industrial electrical and industrial PC literacy Department of Defense Secret Security Clearance: Though not required of this role, individuals that have current, previous, or are willing to go through the process to obtain and maintain during the duration of employment are preferred. SUPERVISORY RESPONSIBILITY No TRAVEL REQUIREMENTS May be required to travel to other site locations during the workday and would primarily be local during the business day. However, some projects may require overnight stays as well as out-of-the-area travel paid for by the business. WORKING CONDITIONS Working conditions described here are representative of those that may be experienced by an employee daily while performing the functions of this job. While performing the duties of this job, employee may be exposed to moving mechanical parts, fumes, airborne particles, caustic chemicals, vibration, and moderate noise level. May be required to work overtime or weekends to meet department and business demands. Will be working in the manufacturing plant, and therefore must be able to wear the necessary personal protective gear (PPE) for most, if not all, of the working day provided for individuals by the business. Most common PPE includes safety shoes, eye protection, and hearing protection. More specialized positions may require PPE specific to hard hats, gloves, face shield / helmet, fall protection, protective clothing, and powered air-purifying respirator (PAPR). Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must be able to sit, climb, balance, stoop, kneel, crouch or crawl. Must be able to see, talk, hear, touch, feel and reach with hands and arms. Must be able to frequently walk & stand for short periods of time Must be able to lift and move up to 35 pounds, occasionally lift and move objects up to 50lbs. Special Requirements Employment is contingent upon successfully passing an employee reference check, criminal background check, and drug screening. This position requires use of information that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'). HWX is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status or a person's relationship or association with a protected veteran, including spouses and other family members, and will not be discriminated against on the basis of disability.
