Micro Precision

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Driver's License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PI0146c2fd5-

Description: Performs electronic calibrations and/or repairs on general purpose and/or specialized measuring and test equipment. Responsibility, Accountability and Decision Making - Normally receives detailed instructions on work; acquires job skills and learns company policies and procedures to complete routine tasks; works on assignments that are routine in nature where limited judgement is required. Duties and Responsbilities: Technical - Performs calibrations in one or more of the following skill areas, as applicable: bio-med instrumentation electronic standards fiber optics LCR and impedance nuclear and radiation physics oscilloscopes particle counters photo/radiometric optometry RADAR RF/microwave power, frequency, and impedance sound pressure level spectrophotometry (including standards) spectrum and network analysis, time interval and frequency vibration video voltage & current waveform analysis, phase and distortion. Communication and Interaction - Communicates conversationally and in writing with coherent sentence structure to all employees; regularly interacts with other technicians and sometimes with CSRs and Purchasing; interaction normally involves exchange of factual information. Leadership - Acts on important opportunities as they arise, sometimes with assistance; willing to act with a minimum of planning; learning to translate ideas into actions; does not hesitate to pursue a sound, innovative idea; works quickly; enthusiastic about assignments; willing to learn; acts ethically and honestly, identifies others whose behavior is not in line with the organization's convictions; words and actions are consistent; strives to excel; follows instructions accurately and in a timely manner, taking responsibility for assigned tasks and completing them as expected. Requirements: General Education and Training - HS Diploma with Algebra, no previous calibration training required. Skills - Performs algebraic equations with ease PIb5757dcbfb24-6778

Description: The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations. Requirements: DUTIES AND RESPONSIBILITIES Responsible for calibrating variety of test instruments for one or more skill areas, such as: ? Electrical Equipment ? Dimensional Equipment ? Industrial / Mechanical Equipment ? Temperature Equipment ? RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops. Ensure that environmental conditions are adequate for the work performed in house and at customer facility. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the customer to operate and / or calibrate the customers equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessments as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification. Everyone has the responsibility to initialize corrective actions as require or applicable for work in process. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Performs standards maintenance & checking of company standards if assigned by Lab Manager. Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager. Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes. PIffeb76c0f7f0-3045

Description: The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations. Requirements: DUTIES AND RESPONSIBILITIES Responsible for calibrating variety of test instruments for one or more skill areas, such as: ? Electrical Equipment ? Dimensional Equipment ? Industrial / Mechanical Equipment ? Temperature Equipment ? RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops. Ensure that environmental conditions are adequate for the work performed in house and at customer facility. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the customer to operate and / or calibrate the customers equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessments as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification. Everyone has the responsibility to initialize corrective actions as require or applicable for work in process. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Performs standards maintenance & checking of company standards if assigned by Lab Manager. Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager. Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes. PIffeb76c0f7f0-3045

Description: The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations. Requirements: DUTIES AND RESPONSIBILITIES Responsible for calibrating variety of test instruments for one or more skill areas, such as: ? Electrical Equipment ? Dimensional Equipment ? Industrial / Mechanical Equipment ? Temperature Equipment ? RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops. Ensure that environmental conditions are adequate for the work performed in house and at customer facility. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the customer to operate and / or calibrate the customers equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessments as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification. Everyone has the responsibility to initialize corrective actions as require or applicable for work in process. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Performs standards maintenance & checking of company standards if assigned by Lab Manager. Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager. Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes. PIffeb76c0f7f0-3045

Description: The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations. Requirements: DUTIES AND RESPONSIBILITIES Responsible for calibrating variety of test instruments for one or more skill areas, such as: ? Electrical Equipment ? Dimensional Equipment ? Industrial / Mechanical Equipment ? Temperature Equipment ? RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops. Ensure that environmental conditions are adequate for the work performed in house and at customer facility. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the customer to operate and / or calibrate the customers equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessments as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification. Everyone has the responsibility to initialize corrective actions as require or applicable for work in process. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Performs standards maintenance & checking of company standards if assigned by Lab Manager. Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager. Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes. PIffeb76c0f7f0-3045

Description: The calibration technician is responsible for maintaining, testing and calibrating the variety of instruments and equipment; Ensures that all instruments, meters and test devices are calibrated correctly and perform accurate readings. Comply with the Policy and Quality Manual (QM), Description of the System of Calibration (CSD) of MPC and the internal work regulations. Requirements: DUTIES AND RESPONSIBILITIES Responsible for calibrating variety of test instruments for one or more skill areas, such as: ? Electrical Equipment ? Dimensional Equipment ? Industrial / Mechanical Equipment ? Temperature Equipment ? RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Protect and complement the documentation pertinent to the work of the field service, including documentation on the abuse or misuse of instruments, worksheets and laptops. Ensure that environmental conditions are adequate for the work performed in house and at customer facility. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the client is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the customer to operate and / or calibrate the customers equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessments as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity qualification. Everyone has the responsibility to initialize corrective actions as require or applicable for work in process. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Performs standards maintenance & checking of company standards if assigned by Lab Manager. Travels regionally or out of the country to perform field calibration work if assigned by Lab Manager. Continues to be trained in all aspects of MP Calibration Services and shares gained knowledge and other best practices with the rest of the members of the team. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes. PIffeb76c0f7f0-3045

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and comply with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Drivers License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in the local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks vacation and 6 days of sick time annually Salary Description $30 to $40 depending on the level of experience PIf9006f2-

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681

Description: Micro Precision Calibration and its staff have provided customers with a complete calibration service for over 30 years. Micro Precision Calibration has a worldwide network of laboratories and international field service teams that can provide localized support. Micro Precision serves biomedical, pharmaceutical, fiber-optic, electronic, mechanical, and telecommunications. We are looking for an individual to join our dynamic and growing company. The principal markets served by Micro Precision include RF, Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, Industrial, and Government. The RF Technician position requires that the technician have a strong background in RF Microwave test equipment including, but not limited to RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, Vector Network Analyzers, Measurement Receivers, and Passive RF Components with familiarity in the RF microwave measurement principles; RF power, s-parameters, attenuation, phase noise, noise figure, AC/DC measure/generate and related measuring discipline. Responsibilities Apply knowledge of electronics, mathematics, and measurement science to calibrate inspection, measurement, and test equipment in the electrical disciplines to ensure measurement accuracy Identify and utilize appropriate measurement techniques Maintain calibration standards Will perform these functions within a laboratory setting or at a customer site Other duties as assigned Working Conditions Capable of lifting (50 pounds) unassisted and frequent lifting of 10-20 pounds Must be willing to travel to local and regional on-site locations Occasional overnight travel may be required Calibration lab and calibration office environment Physical activity includes walking and moderate lifting Requirements: Basic Qualifications Must have a valid driver's license High school diploma or GED 2 years of working experience on RF system/module/CCA Experience using RF Test Equipment (Spectrum Analyzer, VNA, Power Meter, Signal Analyzer, etc.) Proficient with Windows, Microsoft Office, Internet applications, and strong Excel skills Must have strong customer service skills Preferred Qualifications Military PMEL/TMDE/DOD training Electronics/Metrology degree Experience in the calibration of Test Equipment (RF Power Sensors and Meters, RF Generators, Synthesizers, Spectrum Analyzers, VNA, Attenuators, Phase modulation, residuals, and distortion, AC/DC measure/generate) Work performed in the local laboratory located at customer facilities Up to 25% of local travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental, and Vision Insurance, along with FSA 2 weeks of vacation and 6 days of sick time annually PI193f6d55492b-5681