Wayne Brothers Companies

Position Title: Mid-South Operations Supervisor Date Posted: 08/06/2025 Location: Eagleville, TN Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. General Summary Plan, Direct, and Coordinate the day-to-day operations of Preferred Construction Supply at the Eagleville TN location. Supervise any staff to include those working in the PCS warehouse, Shop Maintenance Department, and Facility Maintenance department. Ensure that materials are at appropriate levels such as to meet the expectations and needs of our customers. Maintain constant communication with Group Manager to ensure operations of all departments are operating at expectation. Essential Duties and Responsibilities Work in a safe manner, recognize and correct warehouse / yard hazards, and comply with WBC safety requirements Serve as a safe and productive member Preferred Supply Supervise Preferred Supply staff(Warehouse, Inside Sales, Procurement, Clerical) and ensure they are being productive, supporting Outside Sales Rep(s), performing their duties to meet expectations, and staying on task Identify products and materials we should warehouse and make recommendations to Group Manager Develop and Maintain relationships / rapport with Internal / External Customers, Logistics, Shop Maintenance, and Facilities Maintenance team members and supervisors Manage the receipt and storage of all products ordered and stocked in the Eagleville, TN warehouse Distribution of products / materials - receive requests and arrange for the efficient delivery of such materials Utilize the automated inventory management system using the inventory module in Viewpoint or any future warehouse management system Maintain accurate records of proof of purchase / receipt for accounting Maintain accurate records of shipping and billing to the appropriate WBI Job or Outside Sales Customer Ensure that product is available to meet the customer's orders by controlling inventory levels via physical counts and reconciling with the inventory system / Group Manager Coordinate directly with HQ Purchasing Representative to ensure that inventory levels are being maintained properly and place restock orders Maintain the warehouse and yard in a neat, clean physical condition Coordinate deliveries via the logistics group Order / Source any maintenance consumables needed for the shop or facility, e.g., oil filter, air filters, oil, flowers, pine needles, etc. On occasion deliver materials / products to customers Supervise full-time and part-time employees Create / Review / Maintain management reports and statistics Assist with annual budgets as needed Safety equipment and field survey equipment - manage the internal and outsourced repair of these items Facility Security - Develop and maintain security measures for the site Perform all other tasks and duties as assigned Marginal Duties and Responsibilities Maintain existing procedures of all outgoing and incoming product/materials. Oversee inventory and maintain the warehouse in a clean and organized fashion. Support sales and marketing activities as needed Supervise Shop Maintenance employee(s) and ensure they are productive and staying on task (Perform tasks until position is filled) Supervise Facility Maintenance employee(s) and ensure they are productive and staying on task (Perform tasks until position is filled) Qualifications Excellent interpersonal communication, customer service and leadership skills Frugal (Driven to save), strong business acumen Intelligent, thinks logically and critically, strong analytical ability Excellent planning and organization skills Make decisions based on facts / statistics, problem solve, prioritize assignments Knowledge of the legal requirements of operating a warehouse People supervisory skills, including the ability to lead and motivate others, delegate work and explain ideas Strong technical skills, particularly database management and spreadsheets Industry relevant experience Ability to work under and meet deadlines Personnel additions and issues should be discussed with Group Manager ID21 Education and/or Experience High School Diploma / GED - Required Knowledge, Skills and Abilities Required Light equipment training / experience - Required Computer Skills (typing, email, internet, MS Office / Excel) - Required Valid driver's license - Required Working Conditions Indoors - Frequently Outdoors - Frequently Temperatures - Seasonal Loud Noise - Infrequently Forty to Fifty-hour work weeks - Frequently Certificates, Licenses, Registrations OSHA 10-Hour Certification - Required (Provided by company) Physical Demands Lifting, carrying or moving up to 50 pounds Standing for long periods of time Driving for short and/or long periods of time Frequent climbing and leaning Manual dexterity PM20 Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI44179da7edf7-4028

Position Title: Foreman - Piping Systems Division Date Posted: 07/23/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY Provide front-line supervision of Pipefitting and Welding related tasks and processes to WB Welders, Fitters, and Apprentice level Help ESSENTIAL DUTIES Perform safely, productively and with a focus on quality all duties of a Fitter/Welder as necessary. • Supervise and coordinate activities of workers engaged in construction of WB contract items. Examine/interpret Pipe drawings, Floor Plans and PID's to determine dimensions, specifications, and/or discover any errors in design of project. Under the guidance and supervision of the superintendent, develop, implement and monitor Pre-Task Safety Planning on assigned job sites. Oversee and ensure "lay out" of WB construction work using framing square, tape measure, and other mechanical or electronic measuring devices (theodolites, box levels, etc.). Assist superintendent in selecting and organizing materials to be used on assigned project. Assist superintendent in planning the sequence of activities needed to complete the assigned project. Assign welders, Fitters, and laborers tasks necessary to complete an assigned project. Operate equipment safely when necessary to convey building materials and/or prepare locations for building processes including, but not limited to, excavations, material handling, slab on grade prep, etc. Calculate Pipe and fitting quantities and schedule delivery in a timely manner. Supervise Piping installations and basic welding activities as necessary and appropriate. Examine and adjust delivered piping as necessary to within project specifications prior to installation. Using the Plan, Do, Study, and Act (PDSA) approach, make necessary adjustments to complete the assigned project at the highest level of safety, quality, production, and innovation. Communicate project status and needs to superintendent and/or project managers (e.g., staffing, materials, equipment, etc.) Troubleshoot and handle any problems that may arise during WB construction activities. Assist the superintendent and project manager as necessary with coordinating construction activities to assure that the work is completed at the highest level of safety, quality, production, and innovation. Comply with all pertinent WB, state, OSHA safety rules, regulations, guidelines and policies. Assure that all pertinent WB, state and OSHA safety rules, regulations, guidelines, and policies are followed by all employees, at all times. Report any job site and/or WB employee related safety violation(s) to superintendent and safety department. Assist superintendent with personnel and work evaluation processes. Complete any appropriate paperwork on incidents (e.g., equipment accidents, safety violations, equipment repairs, equipment usage reports, equipment "tag out", other personnel matters, etc.) to superintendent and safety department as necessary or requested. Meet and walk with Engineers, Construction Managers or special inspection personnel (e.g. Structural Engineer, Passivation). Coordinate construction activities with other trades and subcontractors at the field level. Assist and coordinate deliveries of materials and equipment with the superintendent as needed. Oversee loading and unloading materials and equipment so as to ensure they are staged in the appropriate area. Coordinate safely the loading and unloading of delivered equipment and materials to create on-site inventory count of items delivered and when returning equipment and materials (e.g., Pipe/Tube, Skids, Fittings,Valves, etc.) Participate in company sponsored craft and safety training activities. Serve as a safe and productive team member of a construction crew/team. Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times. PM20 Education and/or Experience High School Diploma/GED/Apprenticeship - preferred Vocational or technical training in construction - desirable Knowledge, Skills and Abilities Required Planning, prioritizing, and scheduling work tasks, processes, and teams. Analyzing and interpreting blueprints, shop drawings, PID's and various construction documents. Measuring and calculating square/Linear feet precisely. Problem-solving and troubleshooting. Communicating/reporting with supervisors and team. Analyzing, supervising, and guiding the completion of site safety and work-task plans. Recognizing and correcting/teaching job site hazards. Making judgments and decisions. Listening, speaking, reading and writing at a basic level. Thinking logically and critically. Seeing and interpreting details close-up and far away. Consistent focus on Safety, Quality, Production, and Innovation. Interaction with other trades or subcontractors. Working Conditions Outdoors - rarely Indoors - frequently Loud noise - frequently Temperatures - seasonal Personal Protective Equipment - at all times Multi-activity worksites - frequently Traveling/out of town - frequently 40 to 60-hour work week - frequently Heights and depths - frequently Certificates, Licenses, Registrations Valid driver's license - preferred OSHA 10-Hour Certification - required; training provided by Wayne Brothers OSHA 30-Hour Certification - required; training provided by Wayne Brothers First Aid/CPR - desirable All-terrain material handler certification -desirable Aerial lift certification - desirable WB Craft Training and other certifications up through Foreman Level - preferred Physical Demands Lifting and carrying up to 50 pounds Frequent lifting, bending, kneeling and reaching Standing for long periods of time Climbing ladders, working at heights, wearing/using fall protection harness Handling pipe and associated fittings Rigging and Setting equipment and materials Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI8bd651931bb2-7089

Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed." Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED - required Automotive maintenance training / experience - required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors - frequently Outdoors - periodically Temperatures - seasonal Loud noise - frequently Forty to fifty-hour work week - frequently Multi-activity worksites - infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B driver's license - required OSHA - 10-Hour Certification - required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR - desirable ASE Certification - desirable All-terrain material handler certification - required when offered by WBC Aerial lift certification - required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PId42a0-7287

Position Title: Support Assistant Date Posted: 06/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Position Summary The Support Assistant is responsible for the weekly, monthly and annual tasks associated with equipment reporting and billing, logistics/heavy trucking, and service center work orders. Being highly motivated and willing to complete any task assigned while having the ability to communicate with other team members and their manager is a must. Using good judgment is required in all duties and any other tasks as assigned and directed by their manager. Essential Duties and Responsibilities Promote the WBI Core Values. Lead by example. Serve as a safe and productive member of the PCS department. Update equipment location, odometer and hour meter readings in Viewpoint; enter truck usage for trucking tickets and meter readings from work orders. Maintain equipment job lists for monthly billing audit. Follow up on and bill for missing tools. Process equipment billing - auto usage and Field Time Console billing. Send monthly email reminder for equipment coding in Field Time Console. Conduct monthly equipment billing audits to ensure all equipment is billed correctly. Enter unutilized equipment usage for any equipment that was not coded in Field Time Console. Organize and file of service center work orders. Maintain a list of work order quantity by technician. Prepare Job Cost Adjustments for service center work orders and damaged equipment. Match field tickets for department invoices, match and code Comdata receipts. Summarize Wright Express invoice for job billing and off road fuel tax refunds. Maintain list of equipment damages by employee; follow up to ensure Equipment Incident Reports are received. Prepare monthly reports - WBI owned and rented/leased equipment, trucking ticket totals, work order totals, preventative incident totals File IFTA quarterly tax returns. Assist/support Facilities & PCS Support Manager, Directory of Support Services, Logistics Supervisor and Service Center Supervisor as needed. Interact with internal and external customers professionally. Perform other administrative support-related duties as assigned. Marginal Duties and Responsibilities Serve as back-up for administrative office support staff as needed. Qualifications Initiative, people skills and an aptitude for achievement Education and/or Experience Minimum three years' office administrative support experience College degree preferred Excellent organizational skills, communications skills (oral and written), ability to excel at details Experience and skilled in the use of software programs such as MS Word, Excel, Outlook Knowledge, Skills and Abilities Required Plan and efficiently organize work in terms of setting and meeting priorities Interpret and follow oral and written instructions with attentiveness to detail Use independent judgment and thinking in making sound decisions and in developing solutions to problems Communicate clearly and concisely; writing, speaking, listening, etc. Correct English usage, spelling, grammar, punctuation and sentence structure Ability to support diverse personalities Ability to maintain a pleasant personality, positive and proactive thinking Utilize software and data processing applications Analyze and interpret data Creative, innovative thinking Ability to successfully manage multiple tasks simultaneously Adaptable, flexible and quick to learn new skills and office technology Discreetly handle confidential and sensitive matters Working Conditions Indoors - frequently Outdoors - occasionally Temperatures - seasonal Forty-hour work week, occasional overtime if needed Certificates, Licenses, Registrations OSHA 10-Hour Certification - provided by WB Physical Demands Sitting for long periods of time Manual dexterity Lifting, carrying or moving up to 50 pounds PM20 Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI0c0c5b8c7bc2-4777

Position Title: Pipe Layer Date Posted: 09/26/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY To provide safe and efficient pipe laying / labor skills to achieve the daily assigned tasks and project objectives, while looking for ways to improve and grow inside the company. ESSENTIAL DUTIES • Keep a safety mindset by looking for at risk behaviors and reporting near misses • Pipe fitting / labor as necessary to complete the daily assigned tasks. • Assist the team with equipment fueling, greasing and onsite preventative maintenance • Operate compaction and small equipment as necessary to achieve daily assigned tasks and goals • Set pipe laser up, maintain grade for pipe, connect all fittings. • Utility testing Storm, Sanitary Sewer, Water • Spot/flag equipment, vehicles, or traffic as necessary • Continue to foster growth in the company by attending training and participating in mentorship Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times. PM20 Education and/or Experience • High School Education / GED - Preferred KNOWLEDGE, SKILLS AND ABILITIES REQUIRED • Good attitude and character • Willing to learn and share knowledge. • Able to communicate verbally and hand signals. • Willing to stop unsafe work or at-risk behaviors. • Shovel stone/ dirt for pipe work • Keep grade with laser, set laser up, • Connect all fittings and apparatuses for pipe. • Understands utility testing requirements. • Understand pipe installation for water, storm, sewer. • Exhibits proficiency with hand excavation tools. • Install inlet protection and other erosion measures. • Fueling and greasing equipment • Complete excavation and confined space training • Complete or test out of level I Civil Group Training Working Conditions • Please reference the job specific work condition document Indoors: 10% Outdoors: 90% Loud Noise: Occasionally Temperature Changes - Seasonal Traveling/Out of Town - Frequently 40 to 60-hour work week - Frequently Certificates, Licenses, Registrations • Valid Driver's License - Preferred • Understands blueprints- Preferred • OSHA 10-Hour Certification - Required; training provided by Wayne Brothers • Confine space training • Excavation training Physical Demands • Walking Frequently • Twisting/turning/climbing • Repetitive hand/wrist motion • Sitting occasionally • Standing frequently • Lifting, carrying or moving up to 90 pounds • Wearing all PPE when on any project site (e.g., Steel toed boots, Hard hat, Safety glasses, gloves, earplugs, etc.) • Reach above shoulder - Occasionally • Use of voice in communicating along with hand signals - Frequently. • Driving to job sites - Frequently • Communication with operator, frequently R eporting and Advancement: • Reports to the Pipe Foreman, Assistant Superintendent, Superintendent or General Superintendent • Advancement position - Operator tech or Civil tech • Follows instruction from other Team Members Wayne Brothers Companies is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI948c19c0e0be-7868

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturers documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return problem not fixed. Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED required Automotive maintenance training / experience required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors frequently Outdoors - periodically Temperatures seasonal Loud noise - frequently Forty to fifty-hour work week frequently Multi-activity worksites infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B drivers license required OSHA - 10-Hour Certification required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR desirable ASE Certification desirable All-terrain material handler certification required when offered by WBC Aerial lift certification required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI0001c75180f8-7287 Required Preferred Job Industries Other

Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturers documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return problem not fixed. Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED required Automotive maintenance training / experience required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors frequently Outdoors - periodically Temperatures seasonal Loud noise - frequently Forty to fifty-hour work week frequently Multi-activity worksites infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B drivers license required OSHA - 10-Hour Certification required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR desirable ASE Certification desirable All-terrain material handler certification required when offered by WBC Aerial lift certification required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI0001c75180f8-7287 Required Preferred Job Industries Other

Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturers documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return problem not fixed. Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED required Automotive maintenance training / experience required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors frequently Outdoors - periodically Temperatures seasonal Loud noise - frequently Forty to fifty-hour work week frequently Multi-activity worksites infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B drivers license required OSHA - 10-Hour Certification required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR desirable ASE Certification desirable All-terrain material handler certification required when offered by WBC Aerial lift certification required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI0001c75180f8-7287 Required Preferred Job Industries Other

Position Title: Pipe Layer Date Posted: 09/26/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY To provide safe and efficient pipe laying / labor skills to achieve the daily assigned tasks and project objectives, while looking for ways to improve and grow inside the company. ESSENTIAL DUTIES Keep a safety mindset by looking for at risk behaviors and reporting near misses Pipe fitting / labor as necessary to complete the daily assigned tasks. Assist the team with equipment fueling, greasing and onsite preventative maintenance Operate compaction and small equipment as necessary to achieve daily assigned tasks and goals Set pipe laser up, maintain grade for pipe, connect all fittings. Utility testing Storm, Sanitary Sewer, Water Spot/flag equipment, vehicles, or traffic as necessary Continue to foster growth in the company by attending training and participating in mentorship Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times. PM20 Education and/or Experience High School Education / GED Preferred KNOWLEDGE, SKILLS AND ABILITIES REQUIRED Good attitude and character Willing to learn and share knowledge. Able to communicate verbally and hand signals. Willing to stop unsafe work or at-risk behaviors. Shovel stone/ dirt for pipe work Keep grade with laser, set laser up, Connect all fittings and apparatuses for pipe. Understands utility testing requirements. Understand pipe installation for water, storm, sewer. Exhibits proficiency with hand excavation tools. Install inlet protection and other erosion measures. Fueling and greasing equipment Complete excavation and confined space training Complete or test out of level I Civil Group Training Working Conditions Please reference the job specific work condition document Indoors: 10% Outdoors: 90% Loud Noise: Occasionally Temperature Changes - Seasonal Traveling/Out of Town - Frequently 40 to 60-hour work week - Frequently Certificates, Licenses, Registrations Valid Drivers License Preferred Understands blueprints- Preferred OSHA 10-Hour Certification Required; training provided by Wayne Brothers Confine space training Excavation training Physical Demands Walking Frequently Twisting/turning/climbing Repetitive hand/wrist motion Sitting occasionally Standing frequently Lifting, carrying or moving up to 90 pounds Wearing all PPE when on any project site (e.g., Steel toed boots, Hard hat, Safety glasses, gloves, earplugs, etc.) Reach above shoulder - Occasionally Use of voice in communicating along with hand signals - Frequently. Driving to job sites - Frequently Communication with operator, frequently R eporting and Advancement: Reports to the Pipe Foreman, Assistant Superintendent, Superintendent or General Superintendent Advancement position Operator tech or Civil tech Follows instruction from other Team Members Wayne Brothers Companies is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIe25047cc76dc-7868 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: Millwright/Rigger - Travel Required Date Posted: 03/11/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY A tradesman engaged with the erection of machinery. This includes such tasks as leveling, aligning and installing machinery on foundations or base plates and setting, leveling and aligning electric motors or other power sources such as turbines with the equipment. We typically work with steel and must often combine the skills of other mechanical trades in order to successfully install industrial machinery or to assemble machines from prefabricated parts. Millwrights must also be able to read blueprints and other schematics to aid them in the construction of complex systems. ESSENTIAL DUTIES Mechanically inclined to disassemble and assemble machinery and own the personal hand tooling to do so. Familiar with and capable of operating machinery rigging equipment and tooling such as but not limited to dollies, jacks, lift trucks, scissors lifts, and other powered material handling equipment. Read Blueprints, schematics and other technical documents and execute floor layouts and the setting of equipment elevations from provided drawings. Understand complex material handling systems, equipment, motors, and alignment of the same and capable of working on and installation of the same. Working knowledge of and capable of using alignment and leveling tooling such as Brunson, K&E, Rotalign and others a plus. Minimum of 5 years working in the industry and in manufacturing facilities. PM20 Education and/or Experience High school diploma or equivalent Knowledge, Skills and Abilities Required Willingness to safely complete any tasks that are assigned, with a positive attitude. Mechanical aptitude Must be computer literate to operate the alignment equipment Rigging knowledge and skill to assist with movements, as needed. Working Conditions Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. Certificates, Licenses, Registrations Valid Drivers License Preferred OSHA 10-Hour Certification Physical Demands Must be able to stand and/or be on their feet 10-12 hours / day Must be able to lift 50-bs as needed Must be able to go up and down on ladder, steps, or other lifts as needed Must be able to work in outdoor weather and/or unregulated temperatures for 10-12 hours / day Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIa4f52a12627b-7325 Required Preferred Job Industries Other

Position Title: (Mechanic) Shop Service Technician Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed." Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED - required Automotive maintenance training / experience - required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors - frequently Outdoors - periodically Temperatures - seasonal Loud noise - frequently Forty to fifty-hour work week - frequently Multi-activity worksites - infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid driver's license - required OSHA - 10-Hour Certification - required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR - desirable ASE Certification - desirable All-terrain material handler certification - required when offered by WBC Aerial lift certification - required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIe082e330a8b1-7289

Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed." Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED - required Automotive maintenance training / experience - required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors - frequently Outdoors - periodically Temperatures - seasonal Loud noise - frequently Forty to fifty-hour work week - frequently Multi-activity worksites - infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B driver's license - required OSHA - 10-Hour Certification - required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR - desirable ASE Certification - desirable All-terrain material handler certification - required when offered by WBC Aerial lift certification - required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PIb2394e8d6cfe-7287

Position Title: Foreman - Piping Systems Division Date Posted: 07/23/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY Provide front-line supervision of Pipefitting and Welding related tasks and processes to WB Welders, Fitters, and Apprentice level Help ESSENTIAL DUTIES Perform safely, productively and with a focus on quality all duties of a Fitter/Welder as necessary. • Supervise and coordinate activities of workers engaged in construction of WB contract items. Examine/interpret Pipe drawings, Floor Plans and PID's to determine dimensions, specifications, and/or discover any errors in design of project. Under the guidance and supervision of the superintendent, develop, implement and monitor Pre-Task Safety Planning on assigned job sites. Oversee and ensure "lay out" of WB construction work using framing square, tape measure, and other mechanical or electronic measuring devices (theodolites, box levels, etc.). Assist superintendent in selecting and organizing materials to be used on assigned project. Assist superintendent in planning the sequence of activities needed to complete the assigned project. Assign welders, Fitters, and laborers tasks necessary to complete an assigned project. Operate equipment safely when necessary to convey building materials and/or prepare locations for building processes including, but not limited to, excavations, material handling, slab on grade prep, etc. Calculate Pipe and fitting quantities and schedule delivery in a timely manner. Supervise Piping installations and basic welding activities as necessary and appropriate. Examine and adjust delivered piping as necessary to within project specifications prior to installation. Using the Plan, Do, Study, and Act (PDSA) approach, make necessary adjustments to complete the assigned project at the highest level of safety, quality, production, and innovation. Communicate project status and needs to superintendent and/or project managers (e.g., staffing, materials, equipment, etc.) Troubleshoot and handle any problems that may arise during WB construction activities. Assist the superintendent and project manager as necessary with coordinating construction activities to assure that the work is completed at the highest level of safety, quality, production, and innovation. Comply with all pertinent WB, state, OSHA safety rules, regulations, guidelines and policies. Assure that all pertinent WB, state and OSHA safety rules, regulations, guidelines, and policies are followed by all employees, at all times. Report any job site and/or WB employee related safety violation(s) to superintendent and safety department. Assist superintendent with personnel and work evaluation processes. Complete any appropriate paperwork on incidents (e.g., equipment accidents, safety violations, equipment repairs, equipment usage reports, equipment "tag out", other personnel matters, etc.) to superintendent and safety department as necessary or requested. Meet and walk with Engineers, Construction Managers or special inspection personnel (e.g. Structural Engineer, Passivation). Coordinate construction activities with other trades and subcontractors at the field level. Assist and coordinate deliveries of materials and equipment with the superintendent as needed. Oversee loading and unloading materials and equipment so as to ensure they are staged in the appropriate area. Coordinate safely the loading and unloading of delivered equipment and materials to create on-site inventory count of items delivered and when returning equipment and materials (e.g., Pipe/Tube, Skids, Fittings,Valves, etc.) Participate in company sponsored craft and safety training activities. Serve as a safe and productive team member of a construction crew/team. Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times. PM20 Education and/or Experience High School Diploma/GED/Apprenticeship - preferred Vocational or technical training in construction - desirable Knowledge, Skills and Abilities Required Planning, prioritizing, and scheduling work tasks, processes, and teams. Analyzing and interpreting blueprints, shop drawings, PID's and various construction documents. Measuring and calculating square/Linear feet precisely. Problem-solving and troubleshooting. Communicating/reporting with supervisors and team. Analyzing, supervising, and guiding the completion of site safety and work-task plans. Recognizing and correcting/teaching job site hazards. Making judgments and decisions. Listening, speaking, reading and writing at a basic level. Thinking logically and critically. Seeing and interpreting details close-up and far away. Consistent focus on Safety, Quality, Production, and Innovation. Interaction with other trades or subcontractors. Working Conditions Outdoors - rarely Indoors - frequently Loud noise - frequently Temperatures - seasonal Personal Protective Equipment - at all times Multi-activity worksites - frequently Traveling/out of town - frequently 40 to 60-hour work week - frequently Heights and depths - frequently Certificates, Licenses, Registrations Valid driver's license - preferred OSHA 10-Hour Certification - required; training provided by Wayne Brothers OSHA 30-Hour Certification - required; training provided by Wayne Brothers First Aid/CPR - desirable All-terrain material handler certification -desirable Aerial lift certification - desirable WB Craft Training and other certifications up through Foreman Level - preferred Physical Demands Lifting and carrying up to 50 pounds Frequent lifting, bending, kneeling and reaching Standing for long periods of time Climbing ladders, working at heights, wearing/using fall protection harness Handling pipe and associated fittings Rigging and Setting equipment and materials Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI0a16ffdc0eab-7089

Position Title: BIM Engineer for Structures Date Posted: 09/26/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. BIM Engineer Wayne Brothers has provided Civil & Infrastructure and Concrete Construction solutions throughout the Southeast for over 30 years, and has become recognized throughout the construction industry for their progressive culture. All of this is evident through the careful attention to design, the selection of the most effective materials, and the investments made in cutting edge technologies. We are currently seeking a BIM Engineer for Structures to join our team. This position involves more than drafting. The structural modeling technician (referred to as "Building Information Modeling (BIM) Engineer" internally) will work closely with our concrete construction experts to create and coordinate constructible 3D models. If you enjoy learning new skills and solving problems using the latest technologies, this may the opportunity you have been looking for. Summary WBI is currently seeking a full time BIM Engineer for Structures to work out of our Davidson, NC office. Reporting to the Manager of Virtual Design, the BIM Engineer will be responsible for the creation coordination of project models. Elements modeled include concrete, rebar, formwork and embedded items. POSITION SUMMARY A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the BIM Engineer for structures position. All employees are expected to communicate, build relationships with other team members, and always use good judgment. The BIM Engineer for structures is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Generate BIM models in a manner that can be used for project management, project coordination, field engineering (export to robotics for layout) and client and subcontractor communication whereas the model would provide all project team members with a 3D view of the structure, sequencing, logistics, conflicts/issues, animated scheduling, what-if analysis, automated sketch / construction document generation, model element attributes, concrete pour history, etc. Collaborate with the design manager and WBC project teams to ensure effective and efficient model creation and usage in the field. Attend conferences, seminars, workshops and software specific training sessions for VDC, bringing back learning and reporting the information to the appropriate team members. Coordinate with Project Engineering, Project Management and Virtual Construction groups to incorporate changes and revisions into the model during the construction phase. Detail rebar, formwork, structural steel, and other embedded items as required by job scope. • Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times. OTHER RESPONSIBILITIES: • Manage time efficiently to ensure consistent productivity and accuracy in modeling. Maintain record of time spent on each project, along with any extra time spent due to change orders. Maintain model folders for efficient retrieval of any pertinent files. Incorporate pertinent object level details as determined by WBC Standards Utilize file naming standards for all files transmitted to team members, vendors, and clients. Communicate with the estimating team on a regular basis. Communicate with the VDC Manager to establish model "substantial completion" deadlines. PM20 Education and/or Experience 4-year degree in Engineering or Construction Management, or 2-year degree plus applicable experience (Required) Experience with Tekla Structures (Preferred) Experience with construction estimating and/or detailing (Preferred) Proficiency with the Windows environment (Required) Knowledge, Skills and Abilities Required Attention to detail Working to a deadline Organization Working Conditions Working inside Occasional travel Occasional meetings Certificates, Licenses, Registrations Valid Driver's License - Preferred OSHA 10-Hour Certification - Required & Provided by Wayne Brothers Physical Demands Sitting at desk Reading Typing Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI7bd873767abd-6716