Description: Responsible for straightening castings by utilizing a hydraulic press, hammer, micrometers, and indicators according to blueprint specifications, under the direct supervision of the Production Supervisor. Essential Duties and Responsibilities: • Read work orders or production schedules to determine specifications, such as the number of parts to be worked on, the type of work needed and the appropriate machines or equipment to be used. • Examine work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts. • Determines if castings require straightening. • Sets up and/or clamps cas5ing to block in the machine and straighten parts using dies or other tools. • Bends, straightens castings by hammering or using hydraulic press to remove warpage. • Operate straightening press for castings with normal temperature and specified parts to be warm in the furnace before straightening them. • Assist supervisor in die setup. • Inspect or measure finished work pieces to determine conformance to specifications like size and shape of casting, using measuring instruments such as gauges, micrometers, indicators on template. • Finish the assigned work in the allotted time and maintain production levels. • Sort and store castings according to part number and daily log production. • Feed the number and types of parts worked on in the ERP system using routers. • Place scrap castings in assigned carts as instructed by the supervisor. • Use computer programs to record accurate data / follow router / achieve rat3es established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Report problems or concerns with quality, processes, equipment, materials, and labor to Production Supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee handbook and adhere to proper code of conduct while in the company property. • Ensure work meets quality standards and is performed according to established procedures. • Perform all work in a safe and efficient manner and comply with safety regulations and maintain clean and orderly work areas. • Attend scheduled training programs to enhance skills and for safety purposes. • Perform other duties as assigned. Requirements: Education and Experience Requirements/Preferences: • High school diploma or equivalent preferred. • At least two years' work-related skill, knowledge, or experience preferred. Skills & Physical Requirements: • Basic mathematical, grammatical, and arithmetic skills required. • Thorough understanding of mechanics and other properties of machines. • Ability to follow written instructions, diagrams, and blueprints. • Ability to follow proper safety protocols. • Ability to determine whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. • Must be able to work in noisy environments. • Must be able to lift up to 30 pounds, unassisted at times. • Must be able to bend, stretch, squat, and climb to access all parts of the machine. PI9fd7fde31b05-7491
11/18/2026
Full time
Description: Responsible for straightening castings by utilizing a hydraulic press, hammer, micrometers, and indicators according to blueprint specifications, under the direct supervision of the Production Supervisor. Essential Duties and Responsibilities: • Read work orders or production schedules to determine specifications, such as the number of parts to be worked on, the type of work needed and the appropriate machines or equipment to be used. • Examine work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts. • Determines if castings require straightening. • Sets up and/or clamps cas5ing to block in the machine and straighten parts using dies or other tools. • Bends, straightens castings by hammering or using hydraulic press to remove warpage. • Operate straightening press for castings with normal temperature and specified parts to be warm in the furnace before straightening them. • Assist supervisor in die setup. • Inspect or measure finished work pieces to determine conformance to specifications like size and shape of casting, using measuring instruments such as gauges, micrometers, indicators on template. • Finish the assigned work in the allotted time and maintain production levels. • Sort and store castings according to part number and daily log production. • Feed the number and types of parts worked on in the ERP system using routers. • Place scrap castings in assigned carts as instructed by the supervisor. • Use computer programs to record accurate data / follow router / achieve rat3es established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Report problems or concerns with quality, processes, equipment, materials, and labor to Production Supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee handbook and adhere to proper code of conduct while in the company property. • Ensure work meets quality standards and is performed according to established procedures. • Perform all work in a safe and efficient manner and comply with safety regulations and maintain clean and orderly work areas. • Attend scheduled training programs to enhance skills and for safety purposes. • Perform other duties as assigned. Requirements: Education and Experience Requirements/Preferences: • High school diploma or equivalent preferred. • At least two years' work-related skill, knowledge, or experience preferred. Skills & Physical Requirements: • Basic mathematical, grammatical, and arithmetic skills required. • Thorough understanding of mechanics and other properties of machines. • Ability to follow written instructions, diagrams, and blueprints. • Ability to follow proper safety protocols. • Ability to determine whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. • Must be able to work in noisy environments. • Must be able to lift up to 30 pounds, unassisted at times. • Must be able to bend, stretch, squat, and climb to access all parts of the machine. PI9fd7fde31b05-7491
Description: Grind parts using machines, hand tools or hand-held power tools, for a variety of metals. Responsible to finish work pieces that must show high surface quality (e.g., low surface roughness) and high accuracy of shape and dimension using an abrasive wheel as the cutting tool, under the direct supervision of the Production Supervisor. Essential Duties and Responsibilities: • Read work orders or production schedules to determine specifications, such as types and number of parts to be grinded and the appropriate machines or equipment to be used. • Examine work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts before grinding them. • Grind parts to completely remove the gates from the castings creating a smooth finish or to prepare surfaces for further finishing, using hand tools, power tools and machines. • Mark defects such as cracks and splits for repair. • Move controls to adjust, start, or stop equipment during grinding processes. • Use auto-grinders for heavy gating and h and grinders for smaller gating based on the type of the parts, using abrasive belt grinders. • Setup grinding fixtures (automatic and manual grinders) with supervision and set the dimensional requirements; replace belts and parts when needed. • Select files or other abrasives, according to materials, sizes and shapes of work pieces, amount of stock to be removed, finishes specified, and steps in finishing processes. • Measure and mark equipment, objects, or parts to ensure grinding standards are met. • Finish the assigned work in the allotted time and maintain the production levels. • Sort and store castings according to part number and daily log production. • Feed the number and types of parts worked on in the ERP system using the routers. • Place scrap castings in assigned carts as instructed by the supervisor. • Use computer programs to record accurate data/ follow router / achieve rates established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Report problems or concerns with quality, processes, equipment, materials, and labor to Production Supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee handbook and adhere to proper code of conduct while in the company property. • Ensure work meets quality standards and is performed according to established procedures. Requirements: Education and Experience Requirements/Preferences: • High school diploma or equivalent preferred. Skills & Physical Requirements: • Basic mathematical, grammatical, and arithmetic skills required. • Thorough understanding of mechanics and other properties of machines. • Ability to follow written instructions, diagrams, and blueprints. • Ability to follow proper safety protocols. • Ability to determine whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. • Must be able to work in noisy environments. • Must be able to lift up to 30 pounds, unassisted at times. • Must be able to bend, stretch, squat, and climb to access all parts of the machine. PI6-
11/18/2026
Full time
Description: Grind parts using machines, hand tools or hand-held power tools, for a variety of metals. Responsible to finish work pieces that must show high surface quality (e.g., low surface roughness) and high accuracy of shape and dimension using an abrasive wheel as the cutting tool, under the direct supervision of the Production Supervisor. Essential Duties and Responsibilities: • Read work orders or production schedules to determine specifications, such as types and number of parts to be grinded and the appropriate machines or equipment to be used. • Examine work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts before grinding them. • Grind parts to completely remove the gates from the castings creating a smooth finish or to prepare surfaces for further finishing, using hand tools, power tools and machines. • Mark defects such as cracks and splits for repair. • Move controls to adjust, start, or stop equipment during grinding processes. • Use auto-grinders for heavy gating and h and grinders for smaller gating based on the type of the parts, using abrasive belt grinders. • Setup grinding fixtures (automatic and manual grinders) with supervision and set the dimensional requirements; replace belts and parts when needed. • Select files or other abrasives, according to materials, sizes and shapes of work pieces, amount of stock to be removed, finishes specified, and steps in finishing processes. • Measure and mark equipment, objects, or parts to ensure grinding standards are met. • Finish the assigned work in the allotted time and maintain the production levels. • Sort and store castings according to part number and daily log production. • Feed the number and types of parts worked on in the ERP system using the routers. • Place scrap castings in assigned carts as instructed by the supervisor. • Use computer programs to record accurate data/ follow router / achieve rates established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Report problems or concerns with quality, processes, equipment, materials, and labor to Production Supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee handbook and adhere to proper code of conduct while in the company property. • Ensure work meets quality standards and is performed according to established procedures. Requirements: Education and Experience Requirements/Preferences: • High school diploma or equivalent preferred. Skills & Physical Requirements: • Basic mathematical, grammatical, and arithmetic skills required. • Thorough understanding of mechanics and other properties of machines. • Ability to follow written instructions, diagrams, and blueprints. • Ability to follow proper safety protocols. • Ability to determine whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. • Must be able to work in noisy environments. • Must be able to lift up to 30 pounds, unassisted at times. • Must be able to bend, stretch, squat, and climb to access all parts of the machine. PI6-
Description: Operate or tend furnaces, such as electric induction furnaces to melt and refine metal before casting or to produce specified types of alloy, under the direct supervision of the Production Supervisor. Tasks • Read work orders or production schedules to determine specifications, such as part number, selects alloys and heat numbers, amount of materials to be melted, appropriate oven time and temperature, and the foundry method to be followed. • Examine shells/work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts. • Verifies incoming metal shipments; stores metal and ensures weight accuracy of all materials/ orders prior to processing in the foundry. • Perform furnace, system and equipment checks; ensure required ladles are available; ensure the temperatures of the pre-heat furnaces meet specifications; and make changes to the controller settings as deemed necessary. • Determine crucible size for shells being cast; identify alloy grade and melt practice to be used; determine pouring parameters and adhere to the melt procedures. • Fill furnace with metal and observe the melting process so as to avoid damage to equipment and personnel. • Skims slag from surface of molten metal in the furnace, using hand strainer. • Read temperature gauges and observe color changes, adjusting electrical heating units as necessary to melt metal to specifications. • Responsible for the deoxidization procedure for ferrous alloys. • Draw smelted metal samples from furnaces or kettles for analysis and calculate types and amounts of materials needed to ensure that materials meet specifications. • Completes records and reports as required to record production data, and maintain production logs. • Operate controls to move or discharge metal work pieces from furnaces. • Follow and maintain metallurgical and foundry quality standards. • Finish the assigned work in the allotted time and maintain the production levels. • Use computer programs to record accurate data / follow router/ achieve rates established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee Handbook and adhere to proper code of conduct while in the company property. • Perform all work in a safe and efficient manner and comply with safety regulations and maintain clean and orderly work areas. • Perform other tasks as directed by your supervisor. Requirements: Education - High School Diploma or equivalent is preferred. Willing to train the right individuals. PIa711c5b12ae1-8483
11/16/2026
Full time
Description: Operate or tend furnaces, such as electric induction furnaces to melt and refine metal before casting or to produce specified types of alloy, under the direct supervision of the Production Supervisor. Tasks • Read work orders or production schedules to determine specifications, such as part number, selects alloys and heat numbers, amount of materials to be melted, appropriate oven time and temperature, and the foundry method to be followed. • Examine shells/work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts. • Verifies incoming metal shipments; stores metal and ensures weight accuracy of all materials/ orders prior to processing in the foundry. • Perform furnace, system and equipment checks; ensure required ladles are available; ensure the temperatures of the pre-heat furnaces meet specifications; and make changes to the controller settings as deemed necessary. • Determine crucible size for shells being cast; identify alloy grade and melt practice to be used; determine pouring parameters and adhere to the melt procedures. • Fill furnace with metal and observe the melting process so as to avoid damage to equipment and personnel. • Skims slag from surface of molten metal in the furnace, using hand strainer. • Read temperature gauges and observe color changes, adjusting electrical heating units as necessary to melt metal to specifications. • Responsible for the deoxidization procedure for ferrous alloys. • Draw smelted metal samples from furnaces or kettles for analysis and calculate types and amounts of materials needed to ensure that materials meet specifications. • Completes records and reports as required to record production data, and maintain production logs. • Operate controls to move or discharge metal work pieces from furnaces. • Follow and maintain metallurgical and foundry quality standards. • Finish the assigned work in the allotted time and maintain the production levels. • Use computer programs to record accurate data / follow router/ achieve rates established or notify lead person for effective communication. • Inspect and report product or equipment defects or malfunctions to the supervisor. • Follow standard operating procedures (SOPs) as instructed by the supervisor. • Report any accident occurred in the plant related to person, equipment, material or any other to the Production Supervisor as soon as possible. • Follow documented policies and procedures as designated by the company's Employee Handbook and adhere to proper code of conduct while in the company property. • Perform all work in a safe and efficient manner and comply with safety regulations and maintain clean and orderly work areas. • Perform other tasks as directed by your supervisor. Requirements: Education - High School Diploma or equivalent is preferred. Willing to train the right individuals. PIa711c5b12ae1-8483