Bowhead / UIC Technical Services
Dahlgren, Virginia
Overview Bowhead seeks a Senior Systems Engineer as a Subject Matter Expert (SME) to support the development of technology solutions from project inception to demonstration and test for enhanced expeditionary engagement capabilities. The successful candidate will have experience with integrated systems, guidance, navigation, and sensors to improve accuracy and effectively engage moving targets with indirect fires. This position is Part-Time (20 hours a week). Responsibilities • Analyzes actual and predictable operational activities to develop a quantitative, rational basis for technology investigation, decision making or resource allocation. • Utilizes modeling and measuring techniques, mathematics, statistical methods, engineering methods, and other necessary techniques. • Provides integral support in the requirements determination, conceptualization, design, development, testing, verification, and documentation of modeling and simulation based decision support system applications. • While not a supervisory position, may provide work leadership for team members. Qualifications • Requires Bachelor's Degree in an engineering, scientific, or technical discipline. Master preferred • Twelve (12) years professional technical experience including at least six (6) years specialized experience in the areas of Model Based Systems Engineering, Weapons and/or Weapon Systems programs concept definition, design, integration, testing, and engineering. • Intermediate to advanced level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint • Ability to communicate effectively with all levels of employees and outside contacts • Strong interpersonal skills and good judgment with the ability to work alone or as part of a team Physical Demands: Must be able to lift up to 25 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must currently hold a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. MN1
Overview Bowhead seeks a Senior Systems Engineer as a Subject Matter Expert (SME) to support the development of technology solutions from project inception to demonstration and test for enhanced expeditionary engagement capabilities. The successful candidate will have experience with integrated systems, guidance, navigation, and sensors to improve accuracy and effectively engage moving targets with indirect fires. This position is Part-Time (20 hours a week). Responsibilities • Analyzes actual and predictable operational activities to develop a quantitative, rational basis for technology investigation, decision making or resource allocation. • Utilizes modeling and measuring techniques, mathematics, statistical methods, engineering methods, and other necessary techniques. • Provides integral support in the requirements determination, conceptualization, design, development, testing, verification, and documentation of modeling and simulation based decision support system applications. • While not a supervisory position, may provide work leadership for team members. Qualifications • Requires Bachelor's Degree in an engineering, scientific, or technical discipline. Master preferred • Twelve (12) years professional technical experience including at least six (6) years specialized experience in the areas of Model Based Systems Engineering, Weapons and/or Weapon Systems programs concept definition, design, integration, testing, and engineering. • Intermediate to advanced level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint • Ability to communicate effectively with all levels of employees and outside contacts • Strong interpersonal skills and good judgment with the ability to work alone or as part of a team Physical Demands: Must be able to lift up to 25 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must currently hold a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. MN1
The Computer Merchant, LTD.
Stoughton, Massachusetts
JOB TITLE: Senior Mechanical Engineer JOB LOCATION: Stoughton, MA WAGE RANGE : $150 000.00 JOB NUMBER: 25-03648 REQUIRED EXPERIENCE: 5-10 years JOB DESCRIPTION Senior Mechanical Engineer - Will work closely with a multidisciplinary team to facilitate the design, analysis, and manufacture of rotating industrial machinery and ASME code-stamped pressure vessels for a wide range of customers at the forefront of today's process technologies. This position requires in-depth knowledge of ASME BPVC Section VIII Division 1, along with a demonstrated ability to produce ASME calculations and compliance documentation. The Senior ME will collaborate with on-site manufacturing, chemical engineering, quality, and operations in a fast-paced environment. This role will play a key part in advancing the company's product lines through engineering analysis, modeling, simulation, and technical documentation.PRINCIPLE DUTIES/RESPONSIBILITIES Design and calculations of ASME code stamped pressure vessels. Design and analyses of industrial rotating equipment. Selection and verification of mechanical components including seals, bearings, motors, pumps, etc. Generate and review project documentation including but not limited to:Code calculations and design reports Stress and deflection analysis Tolerance analysis and resulting GD&T requirements Technical specifications CAD models and drawings for fabrication, machining, assembly, customer, etc. Equipment and piping layouts Design and manufacturing strategies Development of conceptual designs for prototypes. Design of lifting devices, fixtures and tooling for large-scale manufacturing operations. Coordinate with cross functional stakeholders (manufacturing, quality, etc.) as required for project execution. Review and verify compliance with technical specifications for both projects and components. Conduct finite element analyses (FEA) as needed (structural and thermal) and communicate findings through presentations or reports tailored to diverse technical audiences. Help develop and implement continuous improvement initiatives, often as a cross-functional task. Generate and review quality as well as departmental operating procedures. Oversight and review of similar work from mechanical designers and less experienced engineers. REQUIREMENTS Education & Experience:BSME degree with 5-10 years of experience in the following technical areas, or MSME with 5+ years of experience:ASME BPVC Section VIII Division 1 Industrial machine design, dynamic or rotating equipment Static and dynamic stress/deflection analysis from thermal, pressure, and other mechanical loading scenarios. General: Strong critical thinking and analytical problem-solving skills. Strong written, verbal, and graphical communication skills. Must be willing and eager to learn, teach, and contribute to a wide range of projects. Ability to evaluate efficiency and seek ways to improve or automate tasks, processes. Must be detail oriented. Capable of working in a multi-discipline, fast-paced team environment. Positive attitude, always. Technical:Thorough understanding of pressure vessel design including welding, material selection and fabrication practices. Proficiency with ASME B31.3 Process Piping, design and analysis of piping layouts Ability to efficiently interpret and generate engineering drawings and CAD models; familiarity with GD&T principles and drafting standards. Experience with ANSYS or other FEA programs, analysis of static structural/thermal models Strong command of the following software: SolidWorks, Codeware COMPRESS, Draft Sight/ AutoCAD, Excel, Word, PowerPoint. Familiarity with manufacturing processes such as metal fabrication, machining, welding, and assembly and be capable of interfacing with manufacturing personnel. Strong grasp of engineering fundamentals including stress and deflection analysis and application to real-world design challenges. Demonstrated ability to optimize component or assembly designs for manufacturing, part count reduction, material savings, and manufacturability. Experience working with SolidWorks PDM (Enterprise/Professional) in a multi-user environment or similar PLM/PDM system. Must be familiar with engineering processes, i.e. change procedures, quality control, and approval processes, document control, and file management of CAD data. DESIRABLE QUALIFICATIONS Professional Engineering (PE) License Engineer in Training (EIT) certificate with intent to pursue PE License Experience with foreign pressure vessel codes including:Pressure Equipment Directive (PED - European Union) Supervision Regulation on Safety Technology for Stationary Pressure Vessels (TSG - China) Experience designing non-traditional pressure vessels to satisfy ASME BPVC VIII 1. Proficiency in both top-down and bottom-up design techniques using SolidWorks. Experience with computational fluid dynamics (CFD) including a basic understanding of the underlying physical equations and numerical solution methods. Proficiency with engineering and manufacturing related modules of ERP systems including Part, Bill of Material, and Method of Manufacture creation and maintenance. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
JOB TITLE: Senior Mechanical Engineer JOB LOCATION: Stoughton, MA WAGE RANGE : $150 000.00 JOB NUMBER: 25-03648 REQUIRED EXPERIENCE: 5-10 years JOB DESCRIPTION Senior Mechanical Engineer - Will work closely with a multidisciplinary team to facilitate the design, analysis, and manufacture of rotating industrial machinery and ASME code-stamped pressure vessels for a wide range of customers at the forefront of today's process technologies. This position requires in-depth knowledge of ASME BPVC Section VIII Division 1, along with a demonstrated ability to produce ASME calculations and compliance documentation. The Senior ME will collaborate with on-site manufacturing, chemical engineering, quality, and operations in a fast-paced environment. This role will play a key part in advancing the company's product lines through engineering analysis, modeling, simulation, and technical documentation.PRINCIPLE DUTIES/RESPONSIBILITIES Design and calculations of ASME code stamped pressure vessels. Design and analyses of industrial rotating equipment. Selection and verification of mechanical components including seals, bearings, motors, pumps, etc. Generate and review project documentation including but not limited to:Code calculations and design reports Stress and deflection analysis Tolerance analysis and resulting GD&T requirements Technical specifications CAD models and drawings for fabrication, machining, assembly, customer, etc. Equipment and piping layouts Design and manufacturing strategies Development of conceptual designs for prototypes. Design of lifting devices, fixtures and tooling for large-scale manufacturing operations. Coordinate with cross functional stakeholders (manufacturing, quality, etc.) as required for project execution. Review and verify compliance with technical specifications for both projects and components. Conduct finite element analyses (FEA) as needed (structural and thermal) and communicate findings through presentations or reports tailored to diverse technical audiences. Help develop and implement continuous improvement initiatives, often as a cross-functional task. Generate and review quality as well as departmental operating procedures. Oversight and review of similar work from mechanical designers and less experienced engineers. REQUIREMENTS Education & Experience:BSME degree with 5-10 years of experience in the following technical areas, or MSME with 5+ years of experience:ASME BPVC Section VIII Division 1 Industrial machine design, dynamic or rotating equipment Static and dynamic stress/deflection analysis from thermal, pressure, and other mechanical loading scenarios. General: Strong critical thinking and analytical problem-solving skills. Strong written, verbal, and graphical communication skills. Must be willing and eager to learn, teach, and contribute to a wide range of projects. Ability to evaluate efficiency and seek ways to improve or automate tasks, processes. Must be detail oriented. Capable of working in a multi-discipline, fast-paced team environment. Positive attitude, always. Technical:Thorough understanding of pressure vessel design including welding, material selection and fabrication practices. Proficiency with ASME B31.3 Process Piping, design and analysis of piping layouts Ability to efficiently interpret and generate engineering drawings and CAD models; familiarity with GD&T principles and drafting standards. Experience with ANSYS or other FEA programs, analysis of static structural/thermal models Strong command of the following software: SolidWorks, Codeware COMPRESS, Draft Sight/ AutoCAD, Excel, Word, PowerPoint. Familiarity with manufacturing processes such as metal fabrication, machining, welding, and assembly and be capable of interfacing with manufacturing personnel. Strong grasp of engineering fundamentals including stress and deflection analysis and application to real-world design challenges. Demonstrated ability to optimize component or assembly designs for manufacturing, part count reduction, material savings, and manufacturability. Experience working with SolidWorks PDM (Enterprise/Professional) in a multi-user environment or similar PLM/PDM system. Must be familiar with engineering processes, i.e. change procedures, quality control, and approval processes, document control, and file management of CAD data. DESIRABLE QUALIFICATIONS Professional Engineering (PE) License Engineer in Training (EIT) certificate with intent to pursue PE License Experience with foreign pressure vessel codes including:Pressure Equipment Directive (PED - European Union) Supervision Regulation on Safety Technology for Stationary Pressure Vessels (TSG - China) Experience designing non-traditional pressure vessels to satisfy ASME BPVC VIII 1. Proficiency in both top-down and bottom-up design techniques using SolidWorks. Experience with computational fluid dynamics (CFD) including a basic understanding of the underlying physical equations and numerical solution methods. Proficiency with engineering and manufacturing related modules of ERP systems including Part, Bill of Material, and Method of Manufacture creation and maintenance. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
The Computer Merchant, LTD.
Stoughton, Massachusetts
JOB TITLE: Mechanical Engineer I JOB LOCATION: Stoughton, MA WAGE RANGE : $70,000.00-78,000.00 JOB NUMBER: 25-03647 REQUIRED EXPERIENCE: 0-3 years JOB DESCRIPTION Mechanical Engineer I - Will work closely with a multidisciplinary team to assist in the design and analysis of rotating industrial machinery and ASME code-stamped pressure vessels for a wide range of customers at the forefront of today's process technologies. This position supports continued development and growth of the company's product lines through engineering analysis, 3D modelling, simulation, and preparation of technical documentation. The ME will collaborate with on-site manufacturing, process/chemical engineering and quality teams in a dynamic work environment. We're looking for a team member with strong engineering fundamentals, curiosity, attention to detail, and a desire to learn - someone who can recognize and help solve technical problems through thoughtful analysis and collaboration.PRINCIPLE DUTIES/RESPONSIBILITIES Assists with the design, calculations, and analysis of industrial rotating equipment under the guidance of senior engineering staff. Supports pressure vessel design activities and learns to perform ASME Code calculations under supervision, gaining practical experience with Section VIII and related standards. Assists in the selection of mechanical components including seals, bearings, motors, and pumps. Prepares and maintains project documentation, including but not limited to:Fabrication and machining drawings Code calculations and design reports Customer drawings Equipment and piping layouts General arrangement and assembly drawings Installation, operation, and maintenance manuals Contributes to conceptual design development for prototypes and process equipment. Assists in the design of fixtures and tooling for large-scale manufacturing operations. Collaborates with cross-functional teams including manufacturing, quality, and process engineering. Helps review or develop technical specifications for projects and equipment components. Performs basic finite element analyses (FEA) under supervision (structural, thermal, etc.) and helps prepare findings for technical and non-technical audiences. Other related duties as assigned. REQUIREMENTS Education: BSME with 0-3 years of related engineering experience (internship or co-op experience preferred) Coursework, project, or co-op/internship experience in one or more of the following areas preferred:Industrial machine design Design of dynamic or rotating equipment Familiarity with ASME Section VIII, Division 1 (Boiler and Pressure Vessel Code) Exposure to pressure and/or thermal stress analysis. General: Strong critical thinking and analytical problem-solving skills. Clear and effective written, verbal, and graphical communication abilities. Demonstrated eagerness to learn and contribute across a wide range of projects. Ability to organize and balance multiple tasks effectively while maintaining attention to detail. Proactive in identifying opportunities to improve efficiency, automation, and design processes. Collaborative mindset, able to work effectively within a multi-disciplinary team. Technical: Foundational understanding of mechanical design principles and engineering fundamentals. Ability to read, interpret, and generate engineering drawings under the guidance of senior engineering staff; familiarity with GD&T and drafting standards a plus. Familiarity with 3D modeling and drafting software such as SolidWorks & DraftSight/AutoCAD (2D). Exposure to PDM or PLM systems preferred (SolidWorks PDM experience a plus). General awareness of engineering processes such as change control, quality assurance, document management, and CAD data organization. Basic understanding of manufacturing processes such as metal fabrication, machining operations, welding, and assembly. Apply sound engineering judgment toward manufacturability, part count reduction, cost efficiency. Proficiency with Excel, Word, and PowerPoint. DESIRABLE QUALIFICATIONS Engineer in Training (EIT) certification with intent to pursue Professional Engineering (PE) licensure. SolidWorks Certification (CSWA or higher). Familiarity with pressure vessel design, including welding, material selection, fabrication, and inspection practices per ASME Section VIII, Division 1 (Boiler and Pressure Vessel Code). Basic knowledge of industry standards such as ASME B16.5, B36.10/36.19, and typical piping schedules, fittings, and flange types. Awareness of common pressure vessel components and internals (e.g., nozzles, flanges, supports, jackets, heat transfer surfaces, seals). Experience with Codeware COMPRESS or similar pressure vessel design software. Proficiency in both top-down and bottom-up design techniques using SolidWorks. Exposure to finite element analysis (FEA) or computational fluid dynamics (CFD), with a basic understanding of the underlying physical principles. Experience working within one or more highly regulated industries. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
JOB TITLE: Mechanical Engineer I JOB LOCATION: Stoughton, MA WAGE RANGE : $70,000.00-78,000.00 JOB NUMBER: 25-03647 REQUIRED EXPERIENCE: 0-3 years JOB DESCRIPTION Mechanical Engineer I - Will work closely with a multidisciplinary team to assist in the design and analysis of rotating industrial machinery and ASME code-stamped pressure vessels for a wide range of customers at the forefront of today's process technologies. This position supports continued development and growth of the company's product lines through engineering analysis, 3D modelling, simulation, and preparation of technical documentation. The ME will collaborate with on-site manufacturing, process/chemical engineering and quality teams in a dynamic work environment. We're looking for a team member with strong engineering fundamentals, curiosity, attention to detail, and a desire to learn - someone who can recognize and help solve technical problems through thoughtful analysis and collaboration.PRINCIPLE DUTIES/RESPONSIBILITIES Assists with the design, calculations, and analysis of industrial rotating equipment under the guidance of senior engineering staff. Supports pressure vessel design activities and learns to perform ASME Code calculations under supervision, gaining practical experience with Section VIII and related standards. Assists in the selection of mechanical components including seals, bearings, motors, and pumps. Prepares and maintains project documentation, including but not limited to:Fabrication and machining drawings Code calculations and design reports Customer drawings Equipment and piping layouts General arrangement and assembly drawings Installation, operation, and maintenance manuals Contributes to conceptual design development for prototypes and process equipment. Assists in the design of fixtures and tooling for large-scale manufacturing operations. Collaborates with cross-functional teams including manufacturing, quality, and process engineering. Helps review or develop technical specifications for projects and equipment components. Performs basic finite element analyses (FEA) under supervision (structural, thermal, etc.) and helps prepare findings for technical and non-technical audiences. Other related duties as assigned. REQUIREMENTS Education: BSME with 0-3 years of related engineering experience (internship or co-op experience preferred) Coursework, project, or co-op/internship experience in one or more of the following areas preferred:Industrial machine design Design of dynamic or rotating equipment Familiarity with ASME Section VIII, Division 1 (Boiler and Pressure Vessel Code) Exposure to pressure and/or thermal stress analysis. General: Strong critical thinking and analytical problem-solving skills. Clear and effective written, verbal, and graphical communication abilities. Demonstrated eagerness to learn and contribute across a wide range of projects. Ability to organize and balance multiple tasks effectively while maintaining attention to detail. Proactive in identifying opportunities to improve efficiency, automation, and design processes. Collaborative mindset, able to work effectively within a multi-disciplinary team. Technical: Foundational understanding of mechanical design principles and engineering fundamentals. Ability to read, interpret, and generate engineering drawings under the guidance of senior engineering staff; familiarity with GD&T and drafting standards a plus. Familiarity with 3D modeling and drafting software such as SolidWorks & DraftSight/AutoCAD (2D). Exposure to PDM or PLM systems preferred (SolidWorks PDM experience a plus). General awareness of engineering processes such as change control, quality assurance, document management, and CAD data organization. Basic understanding of manufacturing processes such as metal fabrication, machining operations, welding, and assembly. Apply sound engineering judgment toward manufacturability, part count reduction, cost efficiency. Proficiency with Excel, Word, and PowerPoint. DESIRABLE QUALIFICATIONS Engineer in Training (EIT) certification with intent to pursue Professional Engineering (PE) licensure. SolidWorks Certification (CSWA or higher). Familiarity with pressure vessel design, including welding, material selection, fabrication, and inspection practices per ASME Section VIII, Division 1 (Boiler and Pressure Vessel Code). Basic knowledge of industry standards such as ASME B16.5, B36.10/36.19, and typical piping schedules, fittings, and flange types. Awareness of common pressure vessel components and internals (e.g., nozzles, flanges, supports, jackets, heat transfer surfaces, seals). Experience with Codeware COMPRESS or similar pressure vessel design software. Proficiency in both top-down and bottom-up design techniques using SolidWorks. Exposure to finite element analysis (FEA) or computational fluid dynamics (CFD), with a basic understanding of the underlying physical principles. Experience working within one or more highly regulated industries. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
