What you will do: Clarios is seeking an experienced Senior Modeling Engineer to lead the development of physics-based, data-driven, and system-level models supporting next-generation automotive energy storage systems. This role is responsible for creating, validating, and applying models for batteries, supercapacitors, battery management systems (BMS), charging systems, vehicle electrical architectures, and energy management strategies. The Senior Modeling Engineer will work across product development, advanced technology, systems engineering, controls, and customer engineering teams to enable virtual design validation, performance prediction, optimization, and accelerated product development. The role supports both traditional lead-acid technologies and emerging lithium-ion and sodium-ion energy storage systems for global automotive OEM customers. How you will do it: Modeling & Simulation Development • Develop and maintain electrical, thermal, electrochemical, and system-level models of energy storage products. • Create battery equivalent circuit models (ECM), reduced-order models, and physics-based battery representations. • Develop battery aging, degradation, SOC, SOH, SOP, and RUL prediction models. • Build system simulations for: 12V vehicle networks, 48V vehicle architectures, Dual-voltage systems, Start-stop applications, xEV support functions, Intelligent power management systems • Model interactions between battery systems, DC/DC converters, alternators, loads, and vehicle electrical networks. Controls & Algorithm Development • Support development of: o State of Charge (SOC) estimation algorithms o State of Health (SOH) estimation algorithms o State of Power (SOP) prediction algorithms Vehicle & Customer Application Analysis • Simulate vehicle electrical loads and duty cycles using customer data. • Analyze battery performance under: o Cranking events o Regenerative charging o Idle-reduction strategies o Start-stop operation o Thermal extremes o Aging conditions • Support OEM customer studies regarding battery sizing, architecture selection, and performance optimization. • Develop predictive models supporting proposal and pursuit activities. Model Correlation & Validation • Correlate simulation results against laboratory and vehicle test data. • Develop validation methodologies to ensure model accuracy and robustness. • Conduct sensitivity studies and uncertainty analyses. • Establish modeling standards, assumptions, and best practices across the organization What we look for: Required: • Bachelor's degree in: Mechanical Engineering, Electrical Engineering, Systems Engineering, Chemical Engineering or Related Engineering Discipline • Minimum 8 years of engineering experience. • Minimum 5 years of modeling and simulation experience. • MATLAB/Simulink • Simscape • State-space modeling Preferred: • Master's Degree or PhD in Engineering, Applied Mathematics, Physics, or related field. • Experience developing battery models for: o Lead-acid o AGM o Lithium-ion o Sodium-ion o Ultracapacitor systems What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2026's Most Ethical Companies by Ethisphere. This prestigious recognition marks the fourth consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
09/12/2026
Full time
What you will do: Clarios is seeking an experienced Senior Modeling Engineer to lead the development of physics-based, data-driven, and system-level models supporting next-generation automotive energy storage systems. This role is responsible for creating, validating, and applying models for batteries, supercapacitors, battery management systems (BMS), charging systems, vehicle electrical architectures, and energy management strategies. The Senior Modeling Engineer will work across product development, advanced technology, systems engineering, controls, and customer engineering teams to enable virtual design validation, performance prediction, optimization, and accelerated product development. The role supports both traditional lead-acid technologies and emerging lithium-ion and sodium-ion energy storage systems for global automotive OEM customers. How you will do it: Modeling & Simulation Development • Develop and maintain electrical, thermal, electrochemical, and system-level models of energy storage products. • Create battery equivalent circuit models (ECM), reduced-order models, and physics-based battery representations. • Develop battery aging, degradation, SOC, SOH, SOP, and RUL prediction models. • Build system simulations for: 12V vehicle networks, 48V vehicle architectures, Dual-voltage systems, Start-stop applications, xEV support functions, Intelligent power management systems • Model interactions between battery systems, DC/DC converters, alternators, loads, and vehicle electrical networks. Controls & Algorithm Development • Support development of: o State of Charge (SOC) estimation algorithms o State of Health (SOH) estimation algorithms o State of Power (SOP) prediction algorithms Vehicle & Customer Application Analysis • Simulate vehicle electrical loads and duty cycles using customer data. • Analyze battery performance under: o Cranking events o Regenerative charging o Idle-reduction strategies o Start-stop operation o Thermal extremes o Aging conditions • Support OEM customer studies regarding battery sizing, architecture selection, and performance optimization. • Develop predictive models supporting proposal and pursuit activities. Model Correlation & Validation • Correlate simulation results against laboratory and vehicle test data. • Develop validation methodologies to ensure model accuracy and robustness. • Conduct sensitivity studies and uncertainty analyses. • Establish modeling standards, assumptions, and best practices across the organization What we look for: Required: • Bachelor's degree in: Mechanical Engineering, Electrical Engineering, Systems Engineering, Chemical Engineering or Related Engineering Discipline • Minimum 8 years of engineering experience. • Minimum 5 years of modeling and simulation experience. • MATLAB/Simulink • Simscape • State-space modeling Preferred: • Master's Degree or PhD in Engineering, Applied Mathematics, Physics, or related field. • Experience developing battery models for: o Lead-acid o AGM o Lithium-ion o Sodium-ion o Ultracapacitor systems What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2026's Most Ethical Companies by Ethisphere. This prestigious recognition marks the fourth consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
Date Posted: 2026-05-22 Country: United States of America Location: US-MA-MARLBOROUGH-MA1 1001 Boston Post Rd BLDG 1 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. We deliver solutions that help our nation and allies defend freedom and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. The Radar Mechanical Design Department leads mechanical design, development, and integration of some of the most innovative land-based and shipboard radars in the world. This includes phased array radar systems, electronic modules, pedestals, and power and cooling systems. The department comprises individuals with technical expertise and experience in hardware design, integration, and production support. We have an opportunity for an experienced Senior Mechanical Engineer to support our radar development programs. This person will be responsible for working with mechanical teams in all phases of our design cycles, from concept development through design, development, building and test. Key requirements for this position include proven problem-solving skills and experience in hardware design and integration, engineering analysis, and mechanical drawing creation with military hardware. Individuals will interface and collaborate primarily with other engineering disciplines, as well as operations, systems, quality and program offices. This Senior Mechanical Engineer is an on-site role in Marlborough, MA or Tewksbury, MA. What You Will Do Utilize mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, electronics packaging and/or array integration. Develop technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of phase array radars/electronics for multiple military programs. Help create the definitions of mechanical outline and construction details, component selection and specification, mechanical and assembly drawings, electrical/RF layout, and delivering the final technical data package. Employ transition-to-production practices with the ability to lead a design release into production. Work with limited supervision and meet commitments for assigned schedule, financial, and technical goals with ability to make enhancements and leverage in daily work Prepare proposal inputs on behalf of the product area. Provide technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocks. Perform complex tolerance analyses to ensure form, fit, and function are as intended by design for the use-application. Interact with senior personnel, occasionally including external customers, on significant technical matters often requiring coordination between organizations. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience. Minimum of 3 years in the design of radar architecture or electronics packaging for military or aerospace or commercial applications. Experience with ANSI/ASME Y14.5 GD&T experience in practice. Qualifications We Prefer Experience with ANSI drawing standards and technical data package creation. First order structural analysis techniques. Experience with design to military and commercial standards. Experience in leading small development efforts and teams. Experience with CREO (Pro/E) or similar 3D solid modeling software. Cognizant of machine suppliers' capabilities or have direct experience in manufacturing and assembly support role for producibility. Familiarity with the design and manufacturing processes of CCAs, mechanical/RF components, metal housings, structures, and electronics assemblies, metal fabrications and joining techniques. Experience in selection of materials for structural, thermal, mechanical, electrical, producibility, and environmental considerations including corrosion mitigation and prevention. Working knowledge of Microsoft Office (Word, Excel, PowerPoint). Excellent verbal and written communications and interpersonal skills. Advanced degree in Mechanical, Electrical or Aerospace Engineering. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Whether you're just starting out on your career journey or are an experienced professional, we offer a robust total rewards package with compensation; healthcare, wellness, retirement and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. Relocation assistance available! Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: LI-TR1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
09/12/2026
Full time
Date Posted: 2026-05-22 Country: United States of America Location: US-MA-MARLBOROUGH-MA1 1001 Boston Post Rd BLDG 1 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. We deliver solutions that help our nation and allies defend freedom and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. The Radar Mechanical Design Department leads mechanical design, development, and integration of some of the most innovative land-based and shipboard radars in the world. This includes phased array radar systems, electronic modules, pedestals, and power and cooling systems. The department comprises individuals with technical expertise and experience in hardware design, integration, and production support. We have an opportunity for an experienced Senior Mechanical Engineer to support our radar development programs. This person will be responsible for working with mechanical teams in all phases of our design cycles, from concept development through design, development, building and test. Key requirements for this position include proven problem-solving skills and experience in hardware design and integration, engineering analysis, and mechanical drawing creation with military hardware. Individuals will interface and collaborate primarily with other engineering disciplines, as well as operations, systems, quality and program offices. This Senior Mechanical Engineer is an on-site role in Marlborough, MA or Tewksbury, MA. What You Will Do Utilize mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, electronics packaging and/or array integration. Develop technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of phase array radars/electronics for multiple military programs. Help create the definitions of mechanical outline and construction details, component selection and specification, mechanical and assembly drawings, electrical/RF layout, and delivering the final technical data package. Employ transition-to-production practices with the ability to lead a design release into production. Work with limited supervision and meet commitments for assigned schedule, financial, and technical goals with ability to make enhancements and leverage in daily work Prepare proposal inputs on behalf of the product area. Provide technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocks. Perform complex tolerance analyses to ensure form, fit, and function are as intended by design for the use-application. Interact with senior personnel, occasionally including external customers, on significant technical matters often requiring coordination between organizations. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience. Minimum of 3 years in the design of radar architecture or electronics packaging for military or aerospace or commercial applications. Experience with ANSI/ASME Y14.5 GD&T experience in practice. Qualifications We Prefer Experience with ANSI drawing standards and technical data package creation. First order structural analysis techniques. Experience with design to military and commercial standards. Experience in leading small development efforts and teams. Experience with CREO (Pro/E) or similar 3D solid modeling software. Cognizant of machine suppliers' capabilities or have direct experience in manufacturing and assembly support role for producibility. Familiarity with the design and manufacturing processes of CCAs, mechanical/RF components, metal housings, structures, and electronics assemblies, metal fabrications and joining techniques. Experience in selection of materials for structural, thermal, mechanical, electrical, producibility, and environmental considerations including corrosion mitigation and prevention. Working knowledge of Microsoft Office (Word, Excel, PowerPoint). Excellent verbal and written communications and interpersonal skills. Advanced degree in Mechanical, Electrical or Aerospace Engineering. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Whether you're just starting out on your career journey or are an experienced professional, we offer a robust total rewards package with compensation; healthcare, wellness, retirement and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. Relocation assistance available! Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: LI-TR1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Job Description Job Description The successful candidate will possess: B.S. Building Construction or applicable engineering degree Excellent computer skills utilizing MS Word, Excel, Outlook; MS Projects and/or Primavera Familiarity with navigation of AutoCad 2D & 3D and Navisworks or equivalent Excellent writing and verbal communication skills Team player, enthusiastic, positive attitude and be self-motivated, organized, and dependable Employee Requirements Full Time Employment Aggressively maintain a safe working environment and comply with all government and company mandated environmental, health, and safety policies Provide daily communication with customers, field superintendents, direct supervision, and internal resources to resolve operational problems and other matters related to assigned projects Complete all administrative functions required within the scope of the department Work as part of a team with a common goal. Accept responsibility for work performed Responsibilities: Your responsibilities will include but not be limited to the following in support of the group's strategic goals: Manage profitability and projects assigned to you Prepare cost estimates for projects and change orders Purchase parts, equipment, and services for projects Develop project construction schedules including design, fabrication and installation deadlines Perform complete onsite inspections of process enclosures and air systems equipment (training will be provided) Prepare written inspection reports (training will be provided) Provide onsite project management services as needed for a variety of short duration projects Attend pre-bid meetings as needed Assist in preparation of proposals as needed Quality control Participate in technical and commercial negotiations as required for projects Ability to interpret and markup mechanical drawings Ability to manage a flexible work schedule; responsibilities from time to time could require extensive travel and extended stays Communicate directly with the internal logistics coordinator and customers to schedule material shipment Communicate construction equipment and tooling needs to superintendents and/or customers Communicate with customer regarding progress and final billings. Assist internal accounts receivable department with collections. Company Description Southern Erectors -Thermal Systems Group, Inc. is a well-respected design, build, mechanical contractor and supplying dryer section hoods, process air systems and facility ventilation systems to pulp, paper, tissue, chemical and other process industries. We are a vertically integrated company focusing on Engineering, Design, Manufacturing, Construction and Service. TSG is seeking candidates with excellent technical, written, and verbal communication skills to support a well-established but growing group. Well-rounded building construction candidates are welcome to apply as TSG seeks to place the successful candidate under the supervision of trained, highly successful team leaders. Company Description Southern Erectors -Thermal Systems Group, Inc. is a well-respected design, build, mechanical contractor and supplying dryer section hoods, process air systems and facility ventilation systems to pulp, paper, tissue, chemical and other process industries. We are a vertically integrated company focusing on Engineering, Design, Manufacturing, Construction and Service. TSG is seeking candidates with excellent technical, written, and verbal communication skills to support a well-established but growing group. Well-rounded building construction candidates are welcome to apply as TSG seeks to place the successful candidate under the supervision of trained, highly successful team leaders.
09/12/2026
Full time
Job Description Job Description The successful candidate will possess: B.S. Building Construction or applicable engineering degree Excellent computer skills utilizing MS Word, Excel, Outlook; MS Projects and/or Primavera Familiarity with navigation of AutoCad 2D & 3D and Navisworks or equivalent Excellent writing and verbal communication skills Team player, enthusiastic, positive attitude and be self-motivated, organized, and dependable Employee Requirements Full Time Employment Aggressively maintain a safe working environment and comply with all government and company mandated environmental, health, and safety policies Provide daily communication with customers, field superintendents, direct supervision, and internal resources to resolve operational problems and other matters related to assigned projects Complete all administrative functions required within the scope of the department Work as part of a team with a common goal. Accept responsibility for work performed Responsibilities: Your responsibilities will include but not be limited to the following in support of the group's strategic goals: Manage profitability and projects assigned to you Prepare cost estimates for projects and change orders Purchase parts, equipment, and services for projects Develop project construction schedules including design, fabrication and installation deadlines Perform complete onsite inspections of process enclosures and air systems equipment (training will be provided) Prepare written inspection reports (training will be provided) Provide onsite project management services as needed for a variety of short duration projects Attend pre-bid meetings as needed Assist in preparation of proposals as needed Quality control Participate in technical and commercial negotiations as required for projects Ability to interpret and markup mechanical drawings Ability to manage a flexible work schedule; responsibilities from time to time could require extensive travel and extended stays Communicate directly with the internal logistics coordinator and customers to schedule material shipment Communicate construction equipment and tooling needs to superintendents and/or customers Communicate with customer regarding progress and final billings. Assist internal accounts receivable department with collections. Company Description Southern Erectors -Thermal Systems Group, Inc. is a well-respected design, build, mechanical contractor and supplying dryer section hoods, process air systems and facility ventilation systems to pulp, paper, tissue, chemical and other process industries. We are a vertically integrated company focusing on Engineering, Design, Manufacturing, Construction and Service. TSG is seeking candidates with excellent technical, written, and verbal communication skills to support a well-established but growing group. Well-rounded building construction candidates are welcome to apply as TSG seeks to place the successful candidate under the supervision of trained, highly successful team leaders. Company Description Southern Erectors -Thermal Systems Group, Inc. is a well-respected design, build, mechanical contractor and supplying dryer section hoods, process air systems and facility ventilation systems to pulp, paper, tissue, chemical and other process industries. We are a vertically integrated company focusing on Engineering, Design, Manufacturing, Construction and Service. TSG is seeking candidates with excellent technical, written, and verbal communication skills to support a well-established but growing group. Well-rounded building construction candidates are welcome to apply as TSG seeks to place the successful candidate under the supervision of trained, highly successful team leaders.
Tualatin Hills Park & Recreation District
Beaverton, Oregon
Attention All applicants are required to apply directly to THPRD's external jobs site to be considered for employment: The Tualatin Hills Park & Recreation District (THPRD) seeks a Park Ranger to coordinate and perform trail and natural area maintenance, and habitat conservation. The position will be a champion of ongoing stewardship of trails and natural areas. Centered around high-quality habitats and well-maintained trails, successful applicants will have knowledge of paved trail maintenance and equipment operation, as well as native and non-native plants of Oregon. This park ranger will work in many areas of THPRD including, but not limited to: Westside Trail: a six-mile segment of regional trail from the Tigard city limits to the Tualatin Hills Nature Park. Waterhouse trail: a two-mile segment of community trail south of Walker Rd. Natural areas adjacent to trail segments, such as Mt Williams, Thornbrook Woods, and Beaverton Creek Wetlands. What Youll Do: Maintain and enhance trails, signage, benches, asphalt surfaces and other assets; ensure safe access via vegetation and hazard management. Patrol parks to support safety and protect natural resources. Lead volunteers and part-time staff; train others in equipment use, safety, and district procedures. Identify and manage non-native species using mechanical and chemical methods. Answer questions and engage visitors about plants, wildlife, park rules, and district programs. What You Bring: Experience using power tools, vehicles, and field equipment. Ability to work independently, make sound field decisions, and interpret district policies. Ability to train others in safe work practices and equipment use. Knowledge of trail maintenance and natural resource practices. Skills in conflict resolution, customer service, public communication, and recordkeeping. Experience identifying plant and animal species and participating in educational programs. We are committed to the full inclusion of all qualified individuals. As part of this commitment, THPRD will ensure that people experiencing disabilities are provided reasonable accommodations. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact Human Resources at (link removed)> To reduce barriers to entry, THPRD evaluates an applicant's work history and responses to supplemental questions and does not consider cover letters and resumes in the screening process. Please answer the supplemental questions thoroughly to ensure our subject matter experts can appropriately evaluate your experience. This posting will establish an eligibility list for current and future vacancies and will remain active for one year. Anticipated recruitment process: July 29: Position closes July 30 - August 14: Application review August 15 - August 28: Selection process (may include phone screen, practical assessment, and structured interviews) Mid-September- Target start date Education and Experience: Any equivalent combination of education, experience, and training that would likely provide the applicant with the required knowledge, skills and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Equivalent to high school education plus additional specialized training equal to two years college, in related field, or equivalent work-life experience, and a minimum of one (1) year of increasingly responsible experience in environmental education, habitat restoration, and identification of native plants/animals. Licenses and Certifications: Valid Oregon Driver's License with good driving record. Current Pesticide Applicators License issued by the State of Oregon is required (within 6 months of hire). Current First Aid/CPR and AED Certification, preferred.
09/12/2026
Attention All applicants are required to apply directly to THPRD's external jobs site to be considered for employment: The Tualatin Hills Park & Recreation District (THPRD) seeks a Park Ranger to coordinate and perform trail and natural area maintenance, and habitat conservation. The position will be a champion of ongoing stewardship of trails and natural areas. Centered around high-quality habitats and well-maintained trails, successful applicants will have knowledge of paved trail maintenance and equipment operation, as well as native and non-native plants of Oregon. This park ranger will work in many areas of THPRD including, but not limited to: Westside Trail: a six-mile segment of regional trail from the Tigard city limits to the Tualatin Hills Nature Park. Waterhouse trail: a two-mile segment of community trail south of Walker Rd. Natural areas adjacent to trail segments, such as Mt Williams, Thornbrook Woods, and Beaverton Creek Wetlands. What Youll Do: Maintain and enhance trails, signage, benches, asphalt surfaces and other assets; ensure safe access via vegetation and hazard management. Patrol parks to support safety and protect natural resources. Lead volunteers and part-time staff; train others in equipment use, safety, and district procedures. Identify and manage non-native species using mechanical and chemical methods. Answer questions and engage visitors about plants, wildlife, park rules, and district programs. What You Bring: Experience using power tools, vehicles, and field equipment. Ability to work independently, make sound field decisions, and interpret district policies. Ability to train others in safe work practices and equipment use. Knowledge of trail maintenance and natural resource practices. Skills in conflict resolution, customer service, public communication, and recordkeeping. Experience identifying plant and animal species and participating in educational programs. We are committed to the full inclusion of all qualified individuals. As part of this commitment, THPRD will ensure that people experiencing disabilities are provided reasonable accommodations. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact Human Resources at (link removed)> To reduce barriers to entry, THPRD evaluates an applicant's work history and responses to supplemental questions and does not consider cover letters and resumes in the screening process. Please answer the supplemental questions thoroughly to ensure our subject matter experts can appropriately evaluate your experience. This posting will establish an eligibility list for current and future vacancies and will remain active for one year. Anticipated recruitment process: July 29: Position closes July 30 - August 14: Application review August 15 - August 28: Selection process (may include phone screen, practical assessment, and structured interviews) Mid-September- Target start date Education and Experience: Any equivalent combination of education, experience, and training that would likely provide the applicant with the required knowledge, skills and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Equivalent to high school education plus additional specialized training equal to two years college, in related field, or equivalent work-life experience, and a minimum of one (1) year of increasingly responsible experience in environmental education, habitat restoration, and identification of native plants/animals. Licenses and Certifications: Valid Oregon Driver's License with good driving record. Current Pesticide Applicators License issued by the State of Oregon is required (within 6 months of hire). Current First Aid/CPR and AED Certification, preferred.
Job Description We are currently seeking a skilled Electrical and Controls tech to join our team in Venice. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offers a competitive hourly rate and overtime, favorable benefits, opportunities for advancement, great culture, and strong leadership. POSITION - Maintenance Tech LOCATION - Venice, Florida HOURLY RATE - $32-$38 per hour - Plus .50 per hour for SD - Hourly rate is based on experience and mechanical/electrical testing. SHIFT - 5pm - 3:30am - Monday - Thursday - Perform all work in a safe manner following all company safety policies and procedures - Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics - Maintain open and accurate communication with other maintenance employees as well as supervisor - Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order - Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks - Perform technical maintenance tasks under close supervision. - Provide all information necessary to maintain proper parts inventories. - Work with outside contractors to complete projects and improvements. JOB REQUIREMENTS: Must have experience in a manufacturing plant with 3 years or more of experience, high level of knowledge and skill level - will be expected to be able to train other technicians of lower skill level. - Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment. - Basic understanding of industrial electricity - Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus - Ability to maintain plant utilities (lighting, water systems, drain systems, etc.) - Ability to work independently when directed. - Basic understanding of schematics and blueprints - Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc. - Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.) - Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements - Strong written and verbal communication skills - Strong mathematical and analytical skills What We Offer At MITER Brands, we invest in your health, wealth, and wellness. Our comprehensive benefits package supports you and your eligible spouse/dependents while helping you achieve your personal and professional goals. We offer competitive pay, a 401(k) with company match, and generous paid time off to help you maintain a healthy work-life balance. Health & Wellness Three comprehensive medical plan options Prescription drug coverage Dental insurance Vision insurance Teladoc virtual healthcare services Employee Assistance Program (EAP) Annual Wellness Clinic Financial Protection Company-paid Life Insurance Voluntary Life Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Supplemental Hospital Indemnity Insurance Critical Illness Insurance Accident Insurance Additional Benefits Paid Time Off (PTO) and paid holidays 401(k) retirement plan with company match Tuition Reimbursement Program Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program MITER Brands, including MI Windows and Doors, Milgard, and PGT Innovations, is an Equal Opportunity Employer. We are committed to fostering an inclusive workplace and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, or any other protected status under applicable law. Work Authorization and Sponsorship Disclosure: The Company does not offer employer sponsorship at this time. Therefore, candidates must provide truthful and complete information regarding their eligibility to work in the U.S. and any current or future need for employment sponsorship. Misrepresentation regarding work authorization or sponsorship need at any stage of the hiring process will result in disqualification from consideration, rescission of an employment offer, or termination of employment.
09/12/2026
Full time
Job Description We are currently seeking a skilled Electrical and Controls tech to join our team in Venice. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offers a competitive hourly rate and overtime, favorable benefits, opportunities for advancement, great culture, and strong leadership. POSITION - Maintenance Tech LOCATION - Venice, Florida HOURLY RATE - $32-$38 per hour - Plus .50 per hour for SD - Hourly rate is based on experience and mechanical/electrical testing. SHIFT - 5pm - 3:30am - Monday - Thursday - Perform all work in a safe manner following all company safety policies and procedures - Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics - Maintain open and accurate communication with other maintenance employees as well as supervisor - Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order - Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks - Perform technical maintenance tasks under close supervision. - Provide all information necessary to maintain proper parts inventories. - Work with outside contractors to complete projects and improvements. JOB REQUIREMENTS: Must have experience in a manufacturing plant with 3 years or more of experience, high level of knowledge and skill level - will be expected to be able to train other technicians of lower skill level. - Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment. - Basic understanding of industrial electricity - Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus - Ability to maintain plant utilities (lighting, water systems, drain systems, etc.) - Ability to work independently when directed. - Basic understanding of schematics and blueprints - Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc. - Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.) - Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements - Strong written and verbal communication skills - Strong mathematical and analytical skills What We Offer At MITER Brands, we invest in your health, wealth, and wellness. Our comprehensive benefits package supports you and your eligible spouse/dependents while helping you achieve your personal and professional goals. We offer competitive pay, a 401(k) with company match, and generous paid time off to help you maintain a healthy work-life balance. Health & Wellness Three comprehensive medical plan options Prescription drug coverage Dental insurance Vision insurance Teladoc virtual healthcare services Employee Assistance Program (EAP) Annual Wellness Clinic Financial Protection Company-paid Life Insurance Voluntary Life Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Supplemental Hospital Indemnity Insurance Critical Illness Insurance Accident Insurance Additional Benefits Paid Time Off (PTO) and paid holidays 401(k) retirement plan with company match Tuition Reimbursement Program Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program MITER Brands, including MI Windows and Doors, Milgard, and PGT Innovations, is an Equal Opportunity Employer. We are committed to fostering an inclusive workplace and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, or any other protected status under applicable law. Work Authorization and Sponsorship Disclosure: The Company does not offer employer sponsorship at this time. Therefore, candidates must provide truthful and complete information regarding their eligibility to work in the U.S. and any current or future need for employment sponsorship. Misrepresentation regarding work authorization or sponsorship need at any stage of the hiring process will result in disqualification from consideration, rescission of an employment offer, or termination of employment.
Job Description Job Description Exxel Pacific is seeking individuals who above all else desire joining, and being a key member of, an industry leading and dynamic company that is genuinely focused on its family of employees who, through working collaboratively together, create a thriving TEAM oriented culture. Job description As a member of the Exxel TEAM, the Project Manager is responsible for managing all aspects of one or more construction projects from pre-construction and project set-up to closeout and delivers projects successfully to completion. Works directly with management team to create the best overall customer service possible. Responsibilities include working closely with company management, overseeing the on-site project team, accountable for the project budget and job cost, subcontractors and subcontracts, and maintaining strong relationships with the Client and other project consultants and team members. Essential Functions Capable of being involved in every phase of the project including pre-construction, start-up, and close-out. Participate in redline review of construction documents including architectural and structural coordination. Request, review and track value engineering. Assists with estimate preparation: Send out RFP's, compile and review sub bids, write and/or review bid summaries, prepare project budget Assist with assembly of the Owner Contract and create contract exhibits. Review and manage project schedule with project Superintendent. Project subcontractor and supplier buy-out based on schedule and/or design priorities. Set-up project job cost phase codes, owner billing Schedule of Values (SOV) and related paperwork for computer entry. Complete monthly job cost/profitability projections. Oversight of the Project Engineers (PE) duties including submittal processing, RFI and COR preparation. Prepare and/or review Change Order Requests (COR) prior to submittal to the Owner. Negotiate and write subcontractor change orders. Prepare, in conjunction with accounting, monthly applications for payment to the Owner. Reviews subcontractor invoices and billings for approval. Conduct weekly Owner, Architect, Contractor (OAC) meetings, site staff meetings and Mechanical, Electrical, Plumbing and Fire Sprinkler (MEPF) design and coordination meetings. Resolve issues with subcontractors and suppliers not handled in the field. Monitor, with Superintendent, project staffing and labor needs during the job progress. Assist the project team as needed to achieve timely project closeout and turnover while meeting quality expectations. Strong communicator with Exxel management and project team. Communicates and works closely with safety and quality control team to ensure full compliance on the job site. Degree in Construction Management or a related field (such as Architecture or Engineering), with 3-5 years of Project Management and/or construction experience, or an equivalent combination of education or experience. Possess strong knowledge base in all divisions of commercial and mixed-use building project components including civil/site-work, foundation and structural systems, interior finishes, exterior wall systems, mechanical and electrical systems. Possess strong knowledge of Owner contracts, subcontracts, billing process, scheduling, and estimating and ability to effectively create and manage these documents. Strong computer skills including the ability to use estimating software, On-Screen Takeoff (OST), Bluebeam/PDF, spread sheets, online plan rooms and company communication tools, such as email, internet, as well as working knowledge of Microsoft Office Suite and computer based scheduling software. Experience with Viewpoint is highly beneficial. The base salary range for this position is $105,000-$145,000 per year, depending on qualifications and experience. Exxel Pacific offers a comprehensive and competitive benefits package including medical, dental, vision, life, and disability insurance. Additional benefits include a 401k match, Short-Term Incentive Plan, Employee Stock Ownership Plan, Employee Assistance Program, and paid time off. Paid time off includes 8 paid holidays and 10-25 vacation days per year depending on years of service with Exxel. PI9a649503dc9c-0840
09/12/2026
Full time
Job Description Job Description Exxel Pacific is seeking individuals who above all else desire joining, and being a key member of, an industry leading and dynamic company that is genuinely focused on its family of employees who, through working collaboratively together, create a thriving TEAM oriented culture. Job description As a member of the Exxel TEAM, the Project Manager is responsible for managing all aspects of one or more construction projects from pre-construction and project set-up to closeout and delivers projects successfully to completion. Works directly with management team to create the best overall customer service possible. Responsibilities include working closely with company management, overseeing the on-site project team, accountable for the project budget and job cost, subcontractors and subcontracts, and maintaining strong relationships with the Client and other project consultants and team members. Essential Functions Capable of being involved in every phase of the project including pre-construction, start-up, and close-out. Participate in redline review of construction documents including architectural and structural coordination. Request, review and track value engineering. Assists with estimate preparation: Send out RFP's, compile and review sub bids, write and/or review bid summaries, prepare project budget Assist with assembly of the Owner Contract and create contract exhibits. Review and manage project schedule with project Superintendent. Project subcontractor and supplier buy-out based on schedule and/or design priorities. Set-up project job cost phase codes, owner billing Schedule of Values (SOV) and related paperwork for computer entry. Complete monthly job cost/profitability projections. Oversight of the Project Engineers (PE) duties including submittal processing, RFI and COR preparation. Prepare and/or review Change Order Requests (COR) prior to submittal to the Owner. Negotiate and write subcontractor change orders. Prepare, in conjunction with accounting, monthly applications for payment to the Owner. Reviews subcontractor invoices and billings for approval. Conduct weekly Owner, Architect, Contractor (OAC) meetings, site staff meetings and Mechanical, Electrical, Plumbing and Fire Sprinkler (MEPF) design and coordination meetings. Resolve issues with subcontractors and suppliers not handled in the field. Monitor, with Superintendent, project staffing and labor needs during the job progress. Assist the project team as needed to achieve timely project closeout and turnover while meeting quality expectations. Strong communicator with Exxel management and project team. Communicates and works closely with safety and quality control team to ensure full compliance on the job site. Degree in Construction Management or a related field (such as Architecture or Engineering), with 3-5 years of Project Management and/or construction experience, or an equivalent combination of education or experience. Possess strong knowledge base in all divisions of commercial and mixed-use building project components including civil/site-work, foundation and structural systems, interior finishes, exterior wall systems, mechanical and electrical systems. Possess strong knowledge of Owner contracts, subcontracts, billing process, scheduling, and estimating and ability to effectively create and manage these documents. Strong computer skills including the ability to use estimating software, On-Screen Takeoff (OST), Bluebeam/PDF, spread sheets, online plan rooms and company communication tools, such as email, internet, as well as working knowledge of Microsoft Office Suite and computer based scheduling software. Experience with Viewpoint is highly beneficial. The base salary range for this position is $105,000-$145,000 per year, depending on qualifications and experience. Exxel Pacific offers a comprehensive and competitive benefits package including medical, dental, vision, life, and disability insurance. Additional benefits include a 401k match, Short-Term Incentive Plan, Employee Stock Ownership Plan, Employee Assistance Program, and paid time off. Paid time off includes 8 paid holidays and 10-25 vacation days per year depending on years of service with Exxel. PI9a649503dc9c-0840
Job Description Field Service Technician II Location: Tucson, AZ Shift: 5:30am start time, M-F Compensation: $24.00-$35 per hour, depending on experience. Overtime is required as business needs dictate. Job Summary The Field Service Technician II is responsible for diagnosing, troubleshooting, repairing, and servicing window and door products in residential, commercial, and construction environments. This role requires hands-on experience with window and door installation or repair, strong mechanical aptitude, and a customer-first mindset. The ideal candidate is comfortable working independently, communicating directly with homeowners, builders, and contractors, and delivering quality workmanship that exceeds customer expectations. This position plays a critical role in ensuring customer satisfaction by identifying root causes of product concerns and implementing effective solutions while professionally representing MITER Brands in the field. Essential Duties and Responsibilities Professionally represent MITER Brands and provide exceptional customer service during all customer interactions. Travel to customer homes, job sites, and commercial locations to diagnose and resolve window and door product concerns. Troubleshoot, repair, adjust, and service windows, doors, hardware, glass, and related components. Independently perform service calls while maintaining quality workmanship and safety standards. Identify root causes of product issues and determine appropriate corrective actions. Operate and maintain hand tools, power tools, and service equipment safely and effectively. Document service activities, repair details, observations, and outcomes using mobile devices and company software. Complete and submit accurate service reports in a timely manner. Maintain service vehicle inventory and coordinate the pickup and delivery of parts between warehouses, manufacturing facilities, and customer locations. Inspect incoming parts and materials for quality compliance and coordinate replacements when necessary. Assist with warehouse organization, inventory management, and unloading deliveries as needed. Keep customer homes, job sites, service vehicles, and work areas clean and organized. Collaborate with other Field Service Technicians on larger projects and complex service situations. Adhere to all company safety policies, procedures, and guidelines. Demonstrate MITER Brands' Guiding Principles in all business interactions. Perform other duties as assigned. Qualifications 5+ years of working knowledge of window and door products, components, installation methods, and repair techniques. Strong troubleshooting, diagnostic, and mechanical skills. Experience using hand tools and power tools. Ability to work independently and solve product issues with minimal supervision. Strong customer service and communication skills. Basic computer proficiency, including Microsoft Outlook and Windows-based applications. Ability to effectively use mobile devices and service software for reporting and documentation. Valid driver's license and acceptable driving record in accordance with company policy. Education and Experience High School Diploma or GED preferred. Minimum of two (5) years of experience in window and door installation, field service, or repair. Experience working directly with homeowners, contractors, builders, or distributors preferred. Physical Requirements Ability to lift, carry, push, and pull materials, parts, and equipment as needed. Ability to stand, walk, bend, kneel, climb, reach, and work in physically demanding environments throughout the workday. Ability to work indoors and outdoors in varying weather conditions. Ability to work in residential, commercial, manufacturing, and active construction environments. Ability to obtain Aerial Lift Certification within six months of employment. Work Environment Field-based position supporting customers throughout the Phoenix market and surrounding areas. Frequent interaction with homeowners, builders, contractors, distributors, and internal teams. Regular use of mobile technology for scheduling, communication, reporting, and documentation. Fast-paced environment requiring strong organizational skills, attention to detail, and the ability to manage multiple priorities. Mandatory overtime may be required during peak periods or as business needs dictate. Travel Requirements Daily local travel throughout the service area is required. Travel between customer locations, warehouses, and manufacturing facilities is a regular part of the role. What We Offer At MITER Brands, we invest in your health, wealth, and wellness. Our comprehensive benefits package supports you and your eligible spouse/dependents while helping you achieve your personal and professional goals. We offer competitive pay, a 401(k) with company match, and generous paid time off to help you maintain a healthy work-life balance. Health & Wellness Three comprehensive medical plan options Prescription drug coverage Dental insurance Vision insurance Teladoc virtual healthcare services Employee Assistance Program (EAP) Annual Wellness Clinic Financial Protection Company-paid Life Insurance Voluntary Life Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Supplemental Hospital Indemnity Insurance Critical Illness Insurance Accident Insurance Additional Benefits Paid Time Off (PTO) and paid holidays 401(k) retirement plan with company match Tuition Reimbursement Program Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program MITER Brands, including MI Windows and Doors, Milgard, and PGT Innovations, is an Equal Opportunity Employer. We are committed to fostering an inclusive workplace and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, or any other protected status under applicable law. Work Authorization and Sponsorship Disclosure: The Company does not offer employer sponsorship at this time. Therefore, candidates must provide truthful and complete information regarding their eligibility to work in the U.S. and any current or future need for employment sponsorship. Misrepresentation regarding work authorization or sponsorship need at any stage of the hiring process will result in disqualification from consideration, rescission of an employment offer, or termination of employment.
09/12/2026
Full time
Job Description Field Service Technician II Location: Tucson, AZ Shift: 5:30am start time, M-F Compensation: $24.00-$35 per hour, depending on experience. Overtime is required as business needs dictate. Job Summary The Field Service Technician II is responsible for diagnosing, troubleshooting, repairing, and servicing window and door products in residential, commercial, and construction environments. This role requires hands-on experience with window and door installation or repair, strong mechanical aptitude, and a customer-first mindset. The ideal candidate is comfortable working independently, communicating directly with homeowners, builders, and contractors, and delivering quality workmanship that exceeds customer expectations. This position plays a critical role in ensuring customer satisfaction by identifying root causes of product concerns and implementing effective solutions while professionally representing MITER Brands in the field. Essential Duties and Responsibilities Professionally represent MITER Brands and provide exceptional customer service during all customer interactions. Travel to customer homes, job sites, and commercial locations to diagnose and resolve window and door product concerns. Troubleshoot, repair, adjust, and service windows, doors, hardware, glass, and related components. Independently perform service calls while maintaining quality workmanship and safety standards. Identify root causes of product issues and determine appropriate corrective actions. Operate and maintain hand tools, power tools, and service equipment safely and effectively. Document service activities, repair details, observations, and outcomes using mobile devices and company software. Complete and submit accurate service reports in a timely manner. Maintain service vehicle inventory and coordinate the pickup and delivery of parts between warehouses, manufacturing facilities, and customer locations. Inspect incoming parts and materials for quality compliance and coordinate replacements when necessary. Assist with warehouse organization, inventory management, and unloading deliveries as needed. Keep customer homes, job sites, service vehicles, and work areas clean and organized. Collaborate with other Field Service Technicians on larger projects and complex service situations. Adhere to all company safety policies, procedures, and guidelines. Demonstrate MITER Brands' Guiding Principles in all business interactions. Perform other duties as assigned. Qualifications 5+ years of working knowledge of window and door products, components, installation methods, and repair techniques. Strong troubleshooting, diagnostic, and mechanical skills. Experience using hand tools and power tools. Ability to work independently and solve product issues with minimal supervision. Strong customer service and communication skills. Basic computer proficiency, including Microsoft Outlook and Windows-based applications. Ability to effectively use mobile devices and service software for reporting and documentation. Valid driver's license and acceptable driving record in accordance with company policy. Education and Experience High School Diploma or GED preferred. Minimum of two (5) years of experience in window and door installation, field service, or repair. Experience working directly with homeowners, contractors, builders, or distributors preferred. Physical Requirements Ability to lift, carry, push, and pull materials, parts, and equipment as needed. Ability to stand, walk, bend, kneel, climb, reach, and work in physically demanding environments throughout the workday. Ability to work indoors and outdoors in varying weather conditions. Ability to work in residential, commercial, manufacturing, and active construction environments. Ability to obtain Aerial Lift Certification within six months of employment. Work Environment Field-based position supporting customers throughout the Phoenix market and surrounding areas. Frequent interaction with homeowners, builders, contractors, distributors, and internal teams. Regular use of mobile technology for scheduling, communication, reporting, and documentation. Fast-paced environment requiring strong organizational skills, attention to detail, and the ability to manage multiple priorities. Mandatory overtime may be required during peak periods or as business needs dictate. Travel Requirements Daily local travel throughout the service area is required. Travel between customer locations, warehouses, and manufacturing facilities is a regular part of the role. What We Offer At MITER Brands, we invest in your health, wealth, and wellness. Our comprehensive benefits package supports you and your eligible spouse/dependents while helping you achieve your personal and professional goals. We offer competitive pay, a 401(k) with company match, and generous paid time off to help you maintain a healthy work-life balance. Health & Wellness Three comprehensive medical plan options Prescription drug coverage Dental insurance Vision insurance Teladoc virtual healthcare services Employee Assistance Program (EAP) Annual Wellness Clinic Financial Protection Company-paid Life Insurance Voluntary Life Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Supplemental Hospital Indemnity Insurance Critical Illness Insurance Accident Insurance Additional Benefits Paid Time Off (PTO) and paid holidays 401(k) retirement plan with company match Tuition Reimbursement Program Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program MITER Brands, including MI Windows and Doors, Milgard, and PGT Innovations, is an Equal Opportunity Employer. We are committed to fostering an inclusive workplace and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, or any other protected status under applicable law. Work Authorization and Sponsorship Disclosure: The Company does not offer employer sponsorship at this time. Therefore, candidates must provide truthful and complete information regarding their eligibility to work in the U.S. and any current or future need for employment sponsorship. Misrepresentation regarding work authorization or sponsorship need at any stage of the hiring process will result in disqualification from consideration, rescission of an employment offer, or termination of employment.
HVAC Technician Amherst Campus Full Time JR7156 Amherst has taken a leadership role among highly selective liberal arts colleges and universities in successfully diversifying the racial, socio-economic, and geographic profile of its student body. The College is similarly committed to enriching its educational experience and its culture through the diversity of its faculty, administration and staff. Job Description: Amherst College invites applications for the HVAC Technician position. The HVAC Technician is a full-time, year-round position. The expected salary range for this job opportunity is: $40 to $45 per hour. The salary offered will vary based on a number of factors, including but not limited to relevant education, training, and experience, tenure status, and other nondiscriminatory business considerations. Amherst College is pleased to provide a comprehensive, highly competitive benefits package that meets the needs of staff and faculty and their families. Click here for Benefits Information . Support the efforts of the Mechanical Shop. Performs software work related to the operation, maintenance, repair, programming and installation of building automation systems and HVAC controls. This includes troubleshooting and performing maintenance services on all types of control systems associated with building automation, including information technology, safety, energy management, digital, electronic, electro-mechanical, and pneumatic. Tests, troubleshoots, diagnoses and repairs all types of building automation system equipment and software. This would include all HVAC equipment and controls, fan and blowers including troubleshooting of motors, fan coils, VAVs, heat exchangers, boilers, chillers, cooling towers, air conditioning and pumps, etc. Ability to read wiring diagrams and blueprints and troubleshoot low-voltage circuitry. Responsible for providing advice/guidance to other staff that may be working with these issues. Provides technological expertise as a point of contact for system controls with manufacturer representatives and building automation service contractors. Current on-campus systems include the Automated Logic and Andover/Schneider Electric Building Management systems. The position is considered an essential position meaning the employee is expected to report to work even if the College is closed for weather-related or other reasons. Due to the nature of the position, some work outside normal operation hours (evenings, weekends and holidays) is required and must respond to emergencies as needed. This position provides essential services to the College and requires 24-hour emergency response to address systems and operations that have a broad impact on campus. This position is expected to use their cellular device to manage these urgent response requirements as needed to perform the requirements of the position. Summary of Responsibilities: General and Planned Maintenance of Systems Maintain, troubleshoot, and repair all building management systems and controls associated with heating, ventilation, air conditioning systems, including electric, electronic, and pneumatic controls. Planned maintenance programs to keep the integrity of all building management systems. Effectively collaborate and communicate with a diverse set of colleagues. Installation of Systems Conduct new installations of HVAC systems and controls associated with space upgrades, renovations or expansion of systems. System Repair Response Response and execution of emergency calls on all HVAC and building management systems. Qualifications: Required High School Diploma or equivalent. HVAC trade school certificate or 5 + years of experience. Specialized skill training/certification in lieu of minimum education and related experience. Strong written and verbal communication and problem-solving skills. Successful completion of required reference and background checks. An acceptable criminal offender records information (CORI) check. Successful completion of pre-employment physical and lift test. Valid driver's license and successful completion of Five College Risk Management driver credentialing program. (See: ) Preferred Associate's Degree in a related field or 8 + years of experience with commercial and industrial HVAC and controls work in lieu of a degree. MA Journeyman Pipefitter's License. MA Refrigeration Technician's License. MA Oil Burner's License. Interested candidates are asked to submit a resume and cover letter online at . Please be sure to upload all requested documents prior to clicking Submit. Applications cannot be revised once submitted. (Current employees and students should apply by clicking on the Jobs Hub icon from their Workday home screen.) Review of applications will begin immediately and will continue until the position is filled. Amherst College is committed to an inclusive hiring process and will provide reasonable accommodations for candidates throughout the application and interview process upon request. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. To apply, visit > Copyright 2025 Inc. All rights reserved. Posted by the FREE value-added recruitment advertising agency je-bb253f0e3aeade04238b5537
09/12/2026
Full time
HVAC Technician Amherst Campus Full Time JR7156 Amherst has taken a leadership role among highly selective liberal arts colleges and universities in successfully diversifying the racial, socio-economic, and geographic profile of its student body. The College is similarly committed to enriching its educational experience and its culture through the diversity of its faculty, administration and staff. Job Description: Amherst College invites applications for the HVAC Technician position. The HVAC Technician is a full-time, year-round position. The expected salary range for this job opportunity is: $40 to $45 per hour. The salary offered will vary based on a number of factors, including but not limited to relevant education, training, and experience, tenure status, and other nondiscriminatory business considerations. Amherst College is pleased to provide a comprehensive, highly competitive benefits package that meets the needs of staff and faculty and their families. Click here for Benefits Information . Support the efforts of the Mechanical Shop. Performs software work related to the operation, maintenance, repair, programming and installation of building automation systems and HVAC controls. This includes troubleshooting and performing maintenance services on all types of control systems associated with building automation, including information technology, safety, energy management, digital, electronic, electro-mechanical, and pneumatic. Tests, troubleshoots, diagnoses and repairs all types of building automation system equipment and software. This would include all HVAC equipment and controls, fan and blowers including troubleshooting of motors, fan coils, VAVs, heat exchangers, boilers, chillers, cooling towers, air conditioning and pumps, etc. Ability to read wiring diagrams and blueprints and troubleshoot low-voltage circuitry. Responsible for providing advice/guidance to other staff that may be working with these issues. Provides technological expertise as a point of contact for system controls with manufacturer representatives and building automation service contractors. Current on-campus systems include the Automated Logic and Andover/Schneider Electric Building Management systems. The position is considered an essential position meaning the employee is expected to report to work even if the College is closed for weather-related or other reasons. Due to the nature of the position, some work outside normal operation hours (evenings, weekends and holidays) is required and must respond to emergencies as needed. This position provides essential services to the College and requires 24-hour emergency response to address systems and operations that have a broad impact on campus. This position is expected to use their cellular device to manage these urgent response requirements as needed to perform the requirements of the position. Summary of Responsibilities: General and Planned Maintenance of Systems Maintain, troubleshoot, and repair all building management systems and controls associated with heating, ventilation, air conditioning systems, including electric, electronic, and pneumatic controls. Planned maintenance programs to keep the integrity of all building management systems. Effectively collaborate and communicate with a diverse set of colleagues. Installation of Systems Conduct new installations of HVAC systems and controls associated with space upgrades, renovations or expansion of systems. System Repair Response Response and execution of emergency calls on all HVAC and building management systems. Qualifications: Required High School Diploma or equivalent. HVAC trade school certificate or 5 + years of experience. Specialized skill training/certification in lieu of minimum education and related experience. Strong written and verbal communication and problem-solving skills. Successful completion of required reference and background checks. An acceptable criminal offender records information (CORI) check. Successful completion of pre-employment physical and lift test. Valid driver's license and successful completion of Five College Risk Management driver credentialing program. (See: ) Preferred Associate's Degree in a related field or 8 + years of experience with commercial and industrial HVAC and controls work in lieu of a degree. MA Journeyman Pipefitter's License. MA Refrigeration Technician's License. MA Oil Burner's License. Interested candidates are asked to submit a resume and cover letter online at . Please be sure to upload all requested documents prior to clicking Submit. Applications cannot be revised once submitted. (Current employees and students should apply by clicking on the Jobs Hub icon from their Workday home screen.) Review of applications will begin immediately and will continue until the position is filled. Amherst College is committed to an inclusive hiring process and will provide reasonable accommodations for candidates throughout the application and interview process upon request. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. To apply, visit > Copyright 2025 Inc. All rights reserved. Posted by the FREE value-added recruitment advertising agency je-bb253f0e3aeade04238b5537
Job Description Job Description Who We Are Norlee Group, Inc. is a multi-trade building systems organization delivering integrated electrical, mechanical, and technology solutions across commercial, industrial, institutional, and specialty markets. As part of our continued growth under the One Norlee platform, we are expanding our Healthcare Division and looking to add talented, motivated professionals to our team. Position Summary The Electrical Foreman is responsible for leading and supervising electrical crews on commercial, residential, service, healthcare, hospitality, and/or multi family projects. This role ensures work is completed safely, on schedule, within budget, and in compliance with company standards, project specifications, and applicable electrical codes. The Electrical Foreman acts as the primary on-site leader, coordinating manpower, materials, and communication between the field and project management. Key Responsibilities Supervise, direct, and coordinate the daily activities of electrical crews on assigned job sites. Plan and schedule work activities to meet project milestones and deadlines. Read, interpret, and enforce electrical drawings, blueprints, specifications, and scopes of work. Ensure all work complies with NEC, local codes, safety regulations, and company policies. Conduct daily job briefings, safety talks, and toolbox meetings. Monitor productivity, quality of workmanship, and crew performance; provide coaching and corrective action as needed. Coordinate with Project Managers, Superintendents, General Contractors, inspectors, and other trades. Order, track, and manage materials, tools, and equipment to avoid delays or waste. Review job progress and report labor hours, material usage, and job status accurately and timely. Identify potential issues or change conditions and communicate them promptly to management. Maintain a clean, organized, and safe job site at all times. Mentor and train apprentices and helpers in proper electrical methods and safety practices. Qualifications Journeyman Electrician license required (Master license preferred, where applicable). Minimum of 5-7 years of electrical experience, including prior leadership or foreman experience. Strong knowledge of commercial and/or industrial electrical systems and installations. Thorough understanding of NEC and local electrical codes. Proven ability to read and interpret construction documents and electrical drawings. Strong leadership, communication, and problem-solving skills. Ability to manage multiple tasks and adapt to changing job site conditions. Proficient with basic technology (smartphones, tablets, timekeeping, and reporting tools). Physical Requirements Ability to stand, walk, bend, climb, and work in confined spaces for extended periods. Ability to lift up to 50 pounds regularly. Comfortable working at heights and in various weather conditions. Work Environment Active construction job sites including commercial, industrial, and institutional projects. Exposure to electrical hazards, noise, dust, and outdoor conditions. Preferred Skills & Attributes OSHA 10 and OSHA 30 certification. Strong organizational and time-management skills. Ability to motivate crews and lead by example. Commitment to safety, quality, and continuous improvement. Compensation & Benefits Competitive pay based on experience and licensing. Health, dental, and vision insurance. Retirement plan with company match. Paid time off and holidays. Opportunities for advancement and continued training. Norlee group, Inc., are equal opportunity employers. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
09/12/2026
Full time
Job Description Job Description Who We Are Norlee Group, Inc. is a multi-trade building systems organization delivering integrated electrical, mechanical, and technology solutions across commercial, industrial, institutional, and specialty markets. As part of our continued growth under the One Norlee platform, we are expanding our Healthcare Division and looking to add talented, motivated professionals to our team. Position Summary The Electrical Foreman is responsible for leading and supervising electrical crews on commercial, residential, service, healthcare, hospitality, and/or multi family projects. This role ensures work is completed safely, on schedule, within budget, and in compliance with company standards, project specifications, and applicable electrical codes. The Electrical Foreman acts as the primary on-site leader, coordinating manpower, materials, and communication between the field and project management. Key Responsibilities Supervise, direct, and coordinate the daily activities of electrical crews on assigned job sites. Plan and schedule work activities to meet project milestones and deadlines. Read, interpret, and enforce electrical drawings, blueprints, specifications, and scopes of work. Ensure all work complies with NEC, local codes, safety regulations, and company policies. Conduct daily job briefings, safety talks, and toolbox meetings. Monitor productivity, quality of workmanship, and crew performance; provide coaching and corrective action as needed. Coordinate with Project Managers, Superintendents, General Contractors, inspectors, and other trades. Order, track, and manage materials, tools, and equipment to avoid delays or waste. Review job progress and report labor hours, material usage, and job status accurately and timely. Identify potential issues or change conditions and communicate them promptly to management. Maintain a clean, organized, and safe job site at all times. Mentor and train apprentices and helpers in proper electrical methods and safety practices. Qualifications Journeyman Electrician license required (Master license preferred, where applicable). Minimum of 5-7 years of electrical experience, including prior leadership or foreman experience. Strong knowledge of commercial and/or industrial electrical systems and installations. Thorough understanding of NEC and local electrical codes. Proven ability to read and interpret construction documents and electrical drawings. Strong leadership, communication, and problem-solving skills. Ability to manage multiple tasks and adapt to changing job site conditions. Proficient with basic technology (smartphones, tablets, timekeeping, and reporting tools). Physical Requirements Ability to stand, walk, bend, climb, and work in confined spaces for extended periods. Ability to lift up to 50 pounds regularly. Comfortable working at heights and in various weather conditions. Work Environment Active construction job sites including commercial, industrial, and institutional projects. Exposure to electrical hazards, noise, dust, and outdoor conditions. Preferred Skills & Attributes OSHA 10 and OSHA 30 certification. Strong organizational and time-management skills. Ability to motivate crews and lead by example. Commitment to safety, quality, and continuous improvement. Compensation & Benefits Competitive pay based on experience and licensing. Health, dental, and vision insurance. Retirement plan with company match. Paid time off and holidays. Opportunities for advancement and continued training. Norlee group, Inc., are equal opportunity employers. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Take your career further! The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. Their dedication, expertise, and collaborative spirit are essential to achieving our goals and supporting other teams within the organization. As a member of our team, you'll have the chance to learn from industry leaders, develop your skills, and build lasting connections with colleagues nationwide. The Transportation Supervisor provides direct supervision for a group of assigned Drivers. Benefits you can count on: Pay rate: $65,000 to $75,000 per year DOE. Up to 10% potential bonus. Monday to Friday 8:00pm start. Position is based out of Northfield, MN location. Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA, and company-paid life insurance Paid time off begins day one. 401(k) Profit Sharing Plan after 90 days. Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as a Transportation Supervisor: Achieve safe, timely, and accurate deliveries to customers via a thorough working knowledge of multi-stop routing systems and dispatch procedures. Review driver logs, hours of service, and other DOT requirements to ensure compliance with all state, local and federal regulations. Coordinate activities with other distribution center departments to ensure that accurate and timely deliveries occur. This position has additional duties. Special projects may be assigned at the position supervisor's discretion. Qualifications you'll bring as a Transportation Supervisor: Have a high school diploma or GED equivalent required. A Bachelor's degree is preferred. Have at least 1 year of transportation management experience in the food distribution industry. Be knowledgeable about DOT regulations. AS/400 experience is preferred. Truck routing software experience preferred. Be able to work a varied and flexible schedule. Have basic competency with Microsoft Office programs (Excel, Outlook, Word). This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards. Fit the following? We want you here! Teamwork oriented Organized Problem solver Detailed Our roadmap. Our story. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the Restaurant, Retail, and E-Commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing teammate training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit
09/12/2026
Full time
Take your career further! The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. Their dedication, expertise, and collaborative spirit are essential to achieving our goals and supporting other teams within the organization. As a member of our team, you'll have the chance to learn from industry leaders, develop your skills, and build lasting connections with colleagues nationwide. The Transportation Supervisor provides direct supervision for a group of assigned Drivers. Benefits you can count on: Pay rate: $65,000 to $75,000 per year DOE. Up to 10% potential bonus. Monday to Friday 8:00pm start. Position is based out of Northfield, MN location. Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA, and company-paid life insurance Paid time off begins day one. 401(k) Profit Sharing Plan after 90 days. Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as a Transportation Supervisor: Achieve safe, timely, and accurate deliveries to customers via a thorough working knowledge of multi-stop routing systems and dispatch procedures. Review driver logs, hours of service, and other DOT requirements to ensure compliance with all state, local and federal regulations. Coordinate activities with other distribution center departments to ensure that accurate and timely deliveries occur. This position has additional duties. Special projects may be assigned at the position supervisor's discretion. Qualifications you'll bring as a Transportation Supervisor: Have a high school diploma or GED equivalent required. A Bachelor's degree is preferred. Have at least 1 year of transportation management experience in the food distribution industry. Be knowledgeable about DOT regulations. AS/400 experience is preferred. Truck routing software experience preferred. Be able to work a varied and flexible schedule. Have basic competency with Microsoft Office programs (Excel, Outlook, Word). This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards. Fit the following? We want you here! Teamwork oriented Organized Problem solver Detailed Our roadmap. Our story. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the Restaurant, Retail, and E-Commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing teammate training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Job Description Job Description Service Technician _ DEPARTMENT: Field Operations REPORTS TO: Area Service Manager FLSA: Non-Exempt (Hourly) Schedule: Monday-Friday, 8am-5pm (On-site) Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus , company-wide discounts , life insurance, Telemedicine access, short & long-term disability, and more! Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading , innovative technology Position Summary The Service Technician plays a critical role in supporting public safety and compliance by ensuring the reliable operation of alcohol monitoring and vehicle electronic systems. This position blends technical expertise with customer service, requiring a hands-on professional who can navigate both the automotive and electrical aspects of vehicle-based technology. Essential Duties and Responsibilities The essential functions include, but are not limited to: Install, service, troubleshoot, and remove alcohol monitoring and vehicle electronic devices. Maintain a clean, organized, and hazard-free work environment. Conduct customer training sessions and provide phone support to ensure satisfaction. Make daily or weekly reminder calls to customers with upcoming appointments. Perform monthly inventory audits and assist nearby facilities as needed. Manage weekly work hours ( 40 hours/week) and communicate effectively with management. Uphold confidentiality, data security, and compliance with all applicable laws and regulations. Perform additional duties as assigned, including vehicle-to-vehicle transfers. Qualifications Note: The qualifications listed below represent the ideal candidate profile. However, we recognize that great talent comes in many forms. If you're passionate about the role and believe you can contribute-even if you don't meet every listed requirement-we strongly encourage you to apply. Training is provided to ensure your success and growth! Education High School Diploma or equivalent required. Electrical & Technical Skills Proficient in 12-volt DC systems , such as GPS systems, remote starts, stereo, and backup camera installations. Skilled in wiring, connectors , and programming electronic devices and vehicle equipment utilizing diagnostics, multimeter testing , and circuit analysis . Experienced in servicing components such as head units, logger boxes, cameras, modems , and curly cords . Mechanical Aptitude Knowledgeable in Ignition, Starter , and Body Control Module (BCM) systems. Hands-on experience with vehicle dashboards and interior panels , including removal and restoration to factory condition. Capable of secure device mounting , ensuring concealment and clearance from moving parts. Operational & Customer Service At least 1 year of experience in a customer-facing role , demonstrating professionalism, empathy, and effective problem-solving. Ability to provide phone support , conduct training sessions , and ensure client satisfaction . Able to download log files , perform calibration updates , and deprogram devices . Strong communication skills with a focus on client satisfaction and technical support . Demonstrated ability to maintain shop cleanliness , perform vehicle-to-vehicle transfers , and support regional operations . Personal Attributes Detail-oriented , with strong organizational and time management skills. Able to work independently and as part of a collaborative team . Committed to maintaining confidentiality , professionalism , and compliance with all regulations. Other Requirements Valid driver's license and reliable transportation may be required depending on location. Ability to pass background checks and drug screening as applicable. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this role, the employee is regularly required to talk or hear, and frequently required to use hands and fingers to handle or feel objects, tools, or controls. The employee is occasionally required to stand, walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate. All duties and responsibilities listed are considered essential functions and may be modified to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent must possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document represent the minimum levels of knowledge, skills, and abilities necessary for the role. This job description does not constitute an employment contract, implied or otherwise, and maintains an "at-will" employment relationship. Employees may be required to follow other job-related instructions and perform additional duties as requested by authorized personnel.
09/12/2026
Full time
Job Description Job Description Service Technician _ DEPARTMENT: Field Operations REPORTS TO: Area Service Manager FLSA: Non-Exempt (Hourly) Schedule: Monday-Friday, 8am-5pm (On-site) Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus , company-wide discounts , life insurance, Telemedicine access, short & long-term disability, and more! Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading , innovative technology Position Summary The Service Technician plays a critical role in supporting public safety and compliance by ensuring the reliable operation of alcohol monitoring and vehicle electronic systems. This position blends technical expertise with customer service, requiring a hands-on professional who can navigate both the automotive and electrical aspects of vehicle-based technology. Essential Duties and Responsibilities The essential functions include, but are not limited to: Install, service, troubleshoot, and remove alcohol monitoring and vehicle electronic devices. Maintain a clean, organized, and hazard-free work environment. Conduct customer training sessions and provide phone support to ensure satisfaction. Make daily or weekly reminder calls to customers with upcoming appointments. Perform monthly inventory audits and assist nearby facilities as needed. Manage weekly work hours ( 40 hours/week) and communicate effectively with management. Uphold confidentiality, data security, and compliance with all applicable laws and regulations. Perform additional duties as assigned, including vehicle-to-vehicle transfers. Qualifications Note: The qualifications listed below represent the ideal candidate profile. However, we recognize that great talent comes in many forms. If you're passionate about the role and believe you can contribute-even if you don't meet every listed requirement-we strongly encourage you to apply. Training is provided to ensure your success and growth! Education High School Diploma or equivalent required. Electrical & Technical Skills Proficient in 12-volt DC systems , such as GPS systems, remote starts, stereo, and backup camera installations. Skilled in wiring, connectors , and programming electronic devices and vehicle equipment utilizing diagnostics, multimeter testing , and circuit analysis . Experienced in servicing components such as head units, logger boxes, cameras, modems , and curly cords . Mechanical Aptitude Knowledgeable in Ignition, Starter , and Body Control Module (BCM) systems. Hands-on experience with vehicle dashboards and interior panels , including removal and restoration to factory condition. Capable of secure device mounting , ensuring concealment and clearance from moving parts. Operational & Customer Service At least 1 year of experience in a customer-facing role , demonstrating professionalism, empathy, and effective problem-solving. Ability to provide phone support , conduct training sessions , and ensure client satisfaction . Able to download log files , perform calibration updates , and deprogram devices . Strong communication skills with a focus on client satisfaction and technical support . Demonstrated ability to maintain shop cleanliness , perform vehicle-to-vehicle transfers , and support regional operations . Personal Attributes Detail-oriented , with strong organizational and time management skills. Able to work independently and as part of a collaborative team . Committed to maintaining confidentiality , professionalism , and compliance with all regulations. Other Requirements Valid driver's license and reliable transportation may be required depending on location. Ability to pass background checks and drug screening as applicable. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this role, the employee is regularly required to talk or hear, and frequently required to use hands and fingers to handle or feel objects, tools, or controls. The employee is occasionally required to stand, walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate. All duties and responsibilities listed are considered essential functions and may be modified to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent must possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document represent the minimum levels of knowledge, skills, and abilities necessary for the role. This job description does not constitute an employment contract, implied or otherwise, and maintains an "at-will" employment relationship. Employees may be required to follow other job-related instructions and perform additional duties as requested by authorized personnel.
Amentum Space Exploration Division
Huntsville, Alabama
Grow With Us Your growth matters to usthats why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like Team Lead Academy, education reimbursement, mentoring, and company sponsored networking events, you can take control of your own career path on your own terms with a company that believes in you. A Place Where You Belong At the Amentum Space Exploration Division, people are at the heart of our business. We reflect a diversity of cultures, backgrounds, and experiences. We expect our people, clients, and partners to treat one another with dignity and respect. This means promoting inclusion, celebrating diversity, and appreciating the differences we all bring to our workplace. Support Your Well-Being Our comprehensive benefits package includes wellness programs, 11 paid holidays, parental leave, paid time off, employee perks and much more. With these benefits, plus the option for flexible schedules and possible remote a few days a week (depending on customer requirements) well support you as you pursue a balanced, fulfilling lifeat work and at home. Position Description: We are searching for an engineer to provide structural and mechanical design support for SLS vehicle development focusing on Spacecraft/Payload Integration. This role requires the ability to work independently and as part of an integrated, collaborative team. Responsibilities include: Providing structural and mechanical design support for flight hardware including adapters and secondary structures, secondary payload support, thermal protection system, electrical interfaces, and isolation hardware between vehicle compartments. Modeling large assembly and subassemblies in support of the Space Launch System program as well as other new and existing spaceflight programs. Managing large Computer Aided Design (CAD) files using Product Data Management (PDM) systems. Providing support for the development, review, and implementation of changes in SLS program documentation. through gathering pertinent information and documentation from appropriate disciplines and presenting to the appropriate governing boards. Participating in reviews, meetings, technical interchange meetings, boards, working groups, and trade studies related to hardware design and development. Qualifications: A degree in Engineering or related field is required (ABET-accredited university preferred). Educational requirements are a BS degree with 0 to 5 years of experience or an MS degree with 0 to 3 years of experience. Skills and experience should demonstrate: Familiarity with launch vehicle systems Experience with structural design methods, test methodology, material behavior, and fabrication methods. Experience interpreting engineering drawings and design tolerances. Ability use PTC Creo 9.0 or newer to create detailed drawings per ASME Y and/or Global Drawing Reference Manual. Ability to apply best CAD practices for robust development of PTC Creo 9.0 or newer drawings, assemblies, and models. Ability to use product design definition created with digital product definition/model-based design practices as described in ASME Y14.41. Familiarity with engineering drawing and model review and release processes. Fluency with Geometric Dimensioning and Tolerancing per ASME Y14.5 for drawing development including tolerance stack-up analysis. Experience with PTC Windchill PLM/PDM software to manage and control models and drawings is preferred. Capable of functioning in a multi-disciplinary team of engineers with expertise in aerosciences, manufacturing and producibility, structural test equipment, and test hardware. Capable of working with external teams including main propulsion systems, reaction control systems, quality control, ground support systems, safety, and system engineering and integration. Excellent written and verbal communication skills are required. Proficiency in Microsoft Office Suite competence (Word, Office, Excel, PowerPoint, Teams, and Outlook) is required. Star ID will be required to obtain access to MSFC. Proof of U.S. Citizenship is required. We are an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language. We are a background screening, drug-free workplace. ASED offers a partnership in which you can grow personally and professionally within a framework of strong leadership, competitive compensation, and rewarding career paths. Come join our team on the Engineering Services and Science Capability Augmentation (ESSCA) contract whose work is destined to have a long-range effect on future generations! For more information on why Huntsville is known as one of the smartest cities in the nation, check out these websites: (link removed) (link removed) (link removed) (link removed) (link removed) To review career opportunities and to submit your resume for Amentum Space Exploration Division in Huntsville, AL, visit (link removed) Select Career Opportunities to reach ASED jobs o Search & choose Job by title o Upload your resume to apply online o Sign-in / Register your profile / Set up Job Alerts
09/12/2026
Grow With Us Your growth matters to usthats why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like Team Lead Academy, education reimbursement, mentoring, and company sponsored networking events, you can take control of your own career path on your own terms with a company that believes in you. A Place Where You Belong At the Amentum Space Exploration Division, people are at the heart of our business. We reflect a diversity of cultures, backgrounds, and experiences. We expect our people, clients, and partners to treat one another with dignity and respect. This means promoting inclusion, celebrating diversity, and appreciating the differences we all bring to our workplace. Support Your Well-Being Our comprehensive benefits package includes wellness programs, 11 paid holidays, parental leave, paid time off, employee perks and much more. With these benefits, plus the option for flexible schedules and possible remote a few days a week (depending on customer requirements) well support you as you pursue a balanced, fulfilling lifeat work and at home. Position Description: We are searching for an engineer to provide structural and mechanical design support for SLS vehicle development focusing on Spacecraft/Payload Integration. This role requires the ability to work independently and as part of an integrated, collaborative team. Responsibilities include: Providing structural and mechanical design support for flight hardware including adapters and secondary structures, secondary payload support, thermal protection system, electrical interfaces, and isolation hardware between vehicle compartments. Modeling large assembly and subassemblies in support of the Space Launch System program as well as other new and existing spaceflight programs. Managing large Computer Aided Design (CAD) files using Product Data Management (PDM) systems. Providing support for the development, review, and implementation of changes in SLS program documentation. through gathering pertinent information and documentation from appropriate disciplines and presenting to the appropriate governing boards. Participating in reviews, meetings, technical interchange meetings, boards, working groups, and trade studies related to hardware design and development. Qualifications: A degree in Engineering or related field is required (ABET-accredited university preferred). Educational requirements are a BS degree with 0 to 5 years of experience or an MS degree with 0 to 3 years of experience. Skills and experience should demonstrate: Familiarity with launch vehicle systems Experience with structural design methods, test methodology, material behavior, and fabrication methods. Experience interpreting engineering drawings and design tolerances. Ability use PTC Creo 9.0 or newer to create detailed drawings per ASME Y and/or Global Drawing Reference Manual. Ability to apply best CAD practices for robust development of PTC Creo 9.0 or newer drawings, assemblies, and models. Ability to use product design definition created with digital product definition/model-based design practices as described in ASME Y14.41. Familiarity with engineering drawing and model review and release processes. Fluency with Geometric Dimensioning and Tolerancing per ASME Y14.5 for drawing development including tolerance stack-up analysis. Experience with PTC Windchill PLM/PDM software to manage and control models and drawings is preferred. Capable of functioning in a multi-disciplinary team of engineers with expertise in aerosciences, manufacturing and producibility, structural test equipment, and test hardware. Capable of working with external teams including main propulsion systems, reaction control systems, quality control, ground support systems, safety, and system engineering and integration. Excellent written and verbal communication skills are required. Proficiency in Microsoft Office Suite competence (Word, Office, Excel, PowerPoint, Teams, and Outlook) is required. Star ID will be required to obtain access to MSFC. Proof of U.S. Citizenship is required. We are an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language. We are a background screening, drug-free workplace. ASED offers a partnership in which you can grow personally and professionally within a framework of strong leadership, competitive compensation, and rewarding career paths. Come join our team on the Engineering Services and Science Capability Augmentation (ESSCA) contract whose work is destined to have a long-range effect on future generations! For more information on why Huntsville is known as one of the smartest cities in the nation, check out these websites: (link removed) (link removed) (link removed) (link removed) (link removed) To review career opportunities and to submit your resume for Amentum Space Exploration Division in Huntsville, AL, visit (link removed) Select Career Opportunities to reach ASED jobs o Search & choose Job by title o Upload your resume to apply online o Sign-in / Register your profile / Set up Job Alerts
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
09/12/2026
Full time
Relocation assistance provided. I. Job Summary This position reports to the Area Gas Operations Manager (AGOM) and is responsible for the operation and maintenance of landfill gas collection and control systems (GCCS) including the supervision and direction of Gas Technician I and Gas Technician II positions as well as contractors. II. Essential Duties and Responsibilities Properly operate and maintain GCCS in a timely and cost-sensitive manner to ensure regulatory compliance and optimize performance. Calibrate, operate, and maintain sensitive electronic data collection devices necessary to optimize LFG collection from the wellfield. On a routine basis, collect and manage data entry from wellfield extraction and environmental monitoring locations. Required to validate a tuning strategy to ensure proper LFG collection and high level of collection efficiency Implement GCCS preventative maintenance and develop ownership for all assigned GCCS. Install, operate, and maintain liquid management system pneumatic or electric driven pumps (troubleshoot and determine liquid levels within LFG collection wells). Perform wellfield monitoring, tuning adjustments, data collection, and field maintenance. Hands on construction using materials such as Polyvinyl Chloride (PVC) and/or High-Density Polyethylene (HDPE) piping materials and associated equipment to perform maintenance on piping or other components of the gas collection system. Troubleshoot GCCS and related systems Train and mentor Gas Technicians on GCCS operations and maintenance activities; mentor and evaluate technician proficiency Manage/supervise contractor activities Provide project management support to the AGOM for GCCS design and construction. Participate in the development of LFG related capital and expense budgets. Be available for on-call response (physically on site or by phone as required) to GCCS related malfunction events. Review and analyze GCCS operating data and prepare reports, coach technicians on same. Implement and enforce all job-related health and safety requirements and procedures. III. Qualifications A. Required Qualifications High School Diploma or GED (accredited). 5 years of landfill gas field or related experience (in addition to education requirements) Administrative Services\DL NUMBER - Driver License, Valid and in State Valid and unrestricted driver's license B. Preferred Qualifications Bachelor's degree in Environmental Science, Physical Science, Biology, or Chemistry (or related field). Electrical/Mechanical vocational or technical school graduate, or post high school technical training in mechanical systems, instrumentation, or environmental fieldwork. Working knowledge of gas collection systems and field equipment such as pumps, blowers, and flare systems. Hands on experience with PVC and/or HDPE piping, components, and associated maintenance activities. Experience with gas blower and/or flare maintenance. Experience using data logging systems and/or landfill gas instrumentation tools for monitoring and performance optimization. Industrial instrumentation experience (field troubleshooting, calibration, monitoring devices). Advanced understanding of environmental regulations related to GCCS operations and/or prior environmental monitoring experience. Background in environmental fieldwork within regulated operations (landfill, industrial, or similar). Basic project management and/or estimating experience supporting system improvements, construction, or maintenance planning. Hands on supervisory experience with the ability to lead, coach, and motivate teams, supported by strong communication, interpersonal, and conflict resolution skills. Willingness and ability to travel as required, with residence within approximately one hour of the Central Landfill to support on site operational needs and emergency response. IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Lifting Carrying Stooping Kneeling Crouching Reaching Handling Grasping Standing Walking Feeling Talking Hearing Repetitive Motions Eye/Hand/Foot Coordination Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. V. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications. Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems. Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions. Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages. Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy. Comply with all Federal, State, and Company regulations while performing duties. Collaborate with other crafts to assist in troubleshooting outside the central control system as needed. Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency. Communicate relevant information to succeeding shifts using management-approved methods. Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems. Maintain equipment records, logs, and updates, preparing reports and schedules as required. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion. Ensure system configurations comply with FAA and accreditation requirements. Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal). Understand electronic theory, computer and networking architecture, microprocessors, and discrete components. Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems. Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Perform tasks associated with other job classifications when necessary to complete assignments. Obtain and maintain applicable licenses, certificates, and certifications. Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems. Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National , lawful permanent resident, refugee, or asylee. Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: Relevant experience can include academic qualifications, military service, or other industry-related roles. 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance. 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment. Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams. Experience working around 3 phase, industrial voltages 480v, 277v, 208v. Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Oct. 13, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age . click apply for full job details
09/12/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications. Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems. Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions. Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages. Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy. Comply with all Federal, State, and Company regulations while performing duties. Collaborate with other crafts to assist in troubleshooting outside the central control system as needed. Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency. Communicate relevant information to succeeding shifts using management-approved methods. Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems. Maintain equipment records, logs, and updates, preparing reports and schedules as required. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion. Ensure system configurations comply with FAA and accreditation requirements. Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal). Understand electronic theory, computer and networking architecture, microprocessors, and discrete components. Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems. Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Perform tasks associated with other job classifications when necessary to complete assignments. Obtain and maintain applicable licenses, certificates, and certifications. Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems. Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National , lawful permanent resident, refugee, or asylee. Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: Relevant experience can include academic qualifications, military service, or other industry-related roles. 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance. 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment. Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams. Experience working around 3 phase, industrial voltages 480v, 277v, 208v. Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Oct. 13, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age . click apply for full job details
Job Description Job Description Service Technician _ DEPARTMENT: Field Operations REPORTS TO: Area Service Manager FLSA: Non-Exempt (Hourly) Schedule: Monday-Friday, 8am-5pm (On-site) Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus , company-wide discounts , life insurance, Telemedicine access, short & long-term disability, and more! Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading , innovative technology Position Summary The Service Technician plays a critical role in supporting public safety and compliance by ensuring the reliable operation of alcohol monitoring and vehicle electronic systems. This position blends technical expertise with customer service, requiring a hands-on professional who can navigate both the automotive and electrical aspects of vehicle-based technology. Essential Duties and Responsibilities The essential functions include, but are not limited to: Install, service, troubleshoot, and remove alcohol monitoring and vehicle electronic devices. Maintain a clean, organized, and hazard-free work environment. Conduct customer training sessions and provide phone support to ensure satisfaction. Make daily or weekly reminder calls to customers with upcoming appointments. Perform monthly inventory audits and assist nearby facilities as needed. Manage weekly work hours ( 40 hours/week) and communicate effectively with management. Uphold confidentiality, data security, and compliance with all applicable laws and regulations. Perform additional duties as assigned, including vehicle-to-vehicle transfers. Qualifications Note: The qualifications listed below represent the ideal candidate profile. However, we recognize that great talent comes in many forms. If you're passionate about the role and believe you can contribute-even if you don't meet every listed requirement-we strongly encourage you to apply. Training is provided to ensure your success and growth! Education High School Diploma or equivalent required. Electrical & Technical Skills Proficient in 12-volt DC systems , such as GPS systems, remote starts, stereo, and backup camera installations. Skilled in wiring, connectors , and programming electronic devices and vehicle equipment utilizing diagnostics, multimeter testing , and circuit analysis . Experienced in servicing components such as head units, logger boxes, cameras, modems , and curly cords . Mechanical Aptitude Knowledgeable in Ignition, Starter , and Body Control Module (BCM) systems. Hands-on experience with vehicle dashboards and interior panels , including removal and restoration to factory condition. Capable of secure device mounting , ensuring concealment and clearance from moving parts. Operational & Customer Service At least 1 year of experience in a customer-facing role , demonstrating professionalism, empathy, and effective problem-solving. Ability to provide phone support , conduct training sessions , and ensure client satisfaction . Able to download log files , perform calibration updates , and deprogram devices . Strong communication skills with a focus on client satisfaction and technical support . Demonstrated ability to maintain shop cleanliness , perform vehicle-to-vehicle transfers , and support regional operations . Personal Attributes Detail-oriented , with strong organizational and time management skills. Able to work independently and as part of a collaborative team . Committed to maintaining confidentiality , professionalism , and compliance with all regulations. Other Requirements Valid driver's license and reliable transportation may be required depending on location. Ability to pass background checks and drug screening as applicable. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this role, the employee is regularly required to talk or hear, and frequently required to use hands and fingers to handle or feel objects, tools, or controls. The employee is occasionally required to stand, walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate. All duties and responsibilities listed are considered essential functions and may be modified to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent must possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document represent the minimum levels of knowledge, skills, and abilities necessary for the role. This job description does not constitute an employment contract, implied or otherwise, and maintains an "at-will" employment relationship. Employees may be required to follow other job-related instructions and perform additional duties as requested by authorized personnel.
09/12/2026
Full time
Job Description Job Description Service Technician _ DEPARTMENT: Field Operations REPORTS TO: Area Service Manager FLSA: Non-Exempt (Hourly) Schedule: Monday-Friday, 8am-5pm (On-site) Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus , company-wide discounts , life insurance, Telemedicine access, short & long-term disability, and more! Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading , innovative technology Position Summary The Service Technician plays a critical role in supporting public safety and compliance by ensuring the reliable operation of alcohol monitoring and vehicle electronic systems. This position blends technical expertise with customer service, requiring a hands-on professional who can navigate both the automotive and electrical aspects of vehicle-based technology. Essential Duties and Responsibilities The essential functions include, but are not limited to: Install, service, troubleshoot, and remove alcohol monitoring and vehicle electronic devices. Maintain a clean, organized, and hazard-free work environment. Conduct customer training sessions and provide phone support to ensure satisfaction. Make daily or weekly reminder calls to customers with upcoming appointments. Perform monthly inventory audits and assist nearby facilities as needed. Manage weekly work hours ( 40 hours/week) and communicate effectively with management. Uphold confidentiality, data security, and compliance with all applicable laws and regulations. Perform additional duties as assigned, including vehicle-to-vehicle transfers. Qualifications Note: The qualifications listed below represent the ideal candidate profile. However, we recognize that great talent comes in many forms. If you're passionate about the role and believe you can contribute-even if you don't meet every listed requirement-we strongly encourage you to apply. Training is provided to ensure your success and growth! Education High School Diploma or equivalent required. Electrical & Technical Skills Proficient in 12-volt DC systems , such as GPS systems, remote starts, stereo, and backup camera installations. Skilled in wiring, connectors , and programming electronic devices and vehicle equipment utilizing diagnostics, multimeter testing , and circuit analysis . Experienced in servicing components such as head units, logger boxes, cameras, modems , and curly cords . Mechanical Aptitude Knowledgeable in Ignition, Starter , and Body Control Module (BCM) systems. Hands-on experience with vehicle dashboards and interior panels , including removal and restoration to factory condition. Capable of secure device mounting , ensuring concealment and clearance from moving parts. Operational & Customer Service At least 1 year of experience in a customer-facing role , demonstrating professionalism, empathy, and effective problem-solving. Ability to provide phone support , conduct training sessions , and ensure client satisfaction . Able to download log files , perform calibration updates , and deprogram devices . Strong communication skills with a focus on client satisfaction and technical support . Demonstrated ability to maintain shop cleanliness , perform vehicle-to-vehicle transfers , and support regional operations . Personal Attributes Detail-oriented , with strong organizational and time management skills. Able to work independently and as part of a collaborative team . Committed to maintaining confidentiality , professionalism , and compliance with all regulations. Other Requirements Valid driver's license and reliable transportation may be required depending on location. Ability to pass background checks and drug screening as applicable. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this role, the employee is regularly required to talk or hear, and frequently required to use hands and fingers to handle or feel objects, tools, or controls. The employee is occasionally required to stand, walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate. All duties and responsibilities listed are considered essential functions and may be modified to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent must possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document represent the minimum levels of knowledge, skills, and abilities necessary for the role. This job description does not constitute an employment contract, implied or otherwise, and maintains an "at-will" employment relationship. Employees may be required to follow other job-related instructions and perform additional duties as requested by authorized personnel.
