Careers With Purpose Join our not-for-profit organization that has provided over 100 years of housing and services to seniors with a commitment to quality care and service in a Christian environment. Facility: GSS IA St Ansgar Ctr Location: Saint Ansgar, IA Address: 701 E 4th St, St Ansgar, IA 50472, USA Shift: Day Job Schedule: Part time Weekly Hours: 20.00 Salary Range: $11 - $17 Job Summary Environmental Services Technician is responsible for maintaining a safe and sanitary environment in patient/resident rooms and assigned areas for patients/residents, visitors and associates by following infection control, safety, and procedural guidelines. Tasks that the individual will be responsible for include but not limited to; emptying waste baskets, sweeping, scrubbing, waxing, or polishing floors, using brooms, mops, or powered scrubbing and waxing machines. Demonstrate knowledge of housekeeping processes, tools and techniques in a healthcare environment; ability to apply this to provide a clean and sterile environment for patients/residents and facility staff. May be responsible for the following locations to clean but not limited to; patient/resident rooms, hallways, lobbies, lounges, restrooms, corridors, elevators, stairways, locker rooms, and other work areas so that health standards are met. Wear the proper protective equipment following the appropriate guidelines. Keep storage, equipment and carts well-stocked, clean, and tidy. Environmental Services Technicians will have access to pagers and other technology that they will be responsible to use appropriately when needed. Assist in the laundry areas as appropriate. Depending upon location and availability of programs, may have access to use of technology applications. Physical activities include but not limited to, considerable use of arms and legs and moving of whole body; such as climbing, lifting, balancing, walking, stooping, twisting, squatting, and handling materials. Ability to lift and/or move up to 40-50lbs and push/pull up variable weight limits on flat surfaces or up and down ramps. This position will require the individual to be on their feet for the majority of their shift. May be exposed to certain levels of noise with the equipment in operation. Depending on location of position, work hours will vary depending on patient/resident needs. This may include overtime, call, backup call, nights, days, weekends, and holidays. Qualifications High school diploma or equivalent preferred. Minimum of six months housekeeping or commercial cleaning experience preferred. Ability to use computer and prior cleaning experience is helpful. Knowledge of materials, equipment, cleaning methods and cleaning chemicals is helpful. Strong customer service, communication and interpersonal skills are required. Previous custodial experience in a healthcare environment is preferred. Benefits The Good Samaritan offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit . The Good Samaritan is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1- or send an email to . The Good Samaritan has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R- Job Function: Facilities and General Services Featured: No
11/01/2025
Full time
Careers With Purpose Join our not-for-profit organization that has provided over 100 years of housing and services to seniors with a commitment to quality care and service in a Christian environment. Facility: GSS IA St Ansgar Ctr Location: Saint Ansgar, IA Address: 701 E 4th St, St Ansgar, IA 50472, USA Shift: Day Job Schedule: Part time Weekly Hours: 20.00 Salary Range: $11 - $17 Job Summary Environmental Services Technician is responsible for maintaining a safe and sanitary environment in patient/resident rooms and assigned areas for patients/residents, visitors and associates by following infection control, safety, and procedural guidelines. Tasks that the individual will be responsible for include but not limited to; emptying waste baskets, sweeping, scrubbing, waxing, or polishing floors, using brooms, mops, or powered scrubbing and waxing machines. Demonstrate knowledge of housekeeping processes, tools and techniques in a healthcare environment; ability to apply this to provide a clean and sterile environment for patients/residents and facility staff. May be responsible for the following locations to clean but not limited to; patient/resident rooms, hallways, lobbies, lounges, restrooms, corridors, elevators, stairways, locker rooms, and other work areas so that health standards are met. Wear the proper protective equipment following the appropriate guidelines. Keep storage, equipment and carts well-stocked, clean, and tidy. Environmental Services Technicians will have access to pagers and other technology that they will be responsible to use appropriately when needed. Assist in the laundry areas as appropriate. Depending upon location and availability of programs, may have access to use of technology applications. Physical activities include but not limited to, considerable use of arms and legs and moving of whole body; such as climbing, lifting, balancing, walking, stooping, twisting, squatting, and handling materials. Ability to lift and/or move up to 40-50lbs and push/pull up variable weight limits on flat surfaces or up and down ramps. This position will require the individual to be on their feet for the majority of their shift. May be exposed to certain levels of noise with the equipment in operation. Depending on location of position, work hours will vary depending on patient/resident needs. This may include overtime, call, backup call, nights, days, weekends, and holidays. Qualifications High school diploma or equivalent preferred. Minimum of six months housekeeping or commercial cleaning experience preferred. Ability to use computer and prior cleaning experience is helpful. Knowledge of materials, equipment, cleaning methods and cleaning chemicals is helpful. Strong customer service, communication and interpersonal skills are required. Previous custodial experience in a healthcare environment is preferred. Benefits The Good Samaritan offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit . The Good Samaritan is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1- or send an email to . The Good Samaritan has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R- Job Function: Facilities and General Services Featured: No
University of California Santa Cruz
Santa Cruz, California
Heavy Duty Equipment Technician ABOUT UC SANTA CRUZ UC Santa Cruz is a public university like no other in California, combining the experience of a small, liberal arts college with the depth and rigor of a major research university. It's known as an unconventional place where innovation and experimentation is part of the campus's DNA. That playful, bold spirit still thrives today, all on a campus renowned as among the most beautiful in the world. DEPARTMENT OVERVIEW Physical Planning, Development & Operations (PPDO) manages and oversees all University activities and services related to physical and environmental planning, design and construction, engineering, physical plant maintenance and operations, capital planning and space management, and the associated business services necessary to support these functions. The University's main campus is spread across more than 2,000 acres and includes over 500 buildings comprising more than 8 million square feet. The department includes operating budgets of over $48 million, manages a capital project portfolio of approximately $500 million, and employs nearly 300 full-time staff to carry forth the duties necessary for the campus' development and operation. JOB SUMMARY Under the direction of the Fleet Services Technical Staff Supervisor, the Heavy-Duty Equipment Technician performs operational level heavy duty vehicular and equipment maintenance and repair duties. The Heavy Duty Equipment Technician inspects, maintains, repairs, diagnoses, adjusts, and replaces mechanical and electrical components on University-owned vehicles and equipment. Vehicles and equipment maintained include passenger sedans, light duty trucks, vans (both passenger and cargo), medium duty and heavy duty trucks, fire and police vehicles, passenger transport buses, tractors and landscape maintenance equipment, street sweepers, standby generators (1-kw to 150-kw), and other vehicles and equipment used in the day to day operations of the University. Systems and sub-systems maintained and repaired include but are not limited to the following: engine, transmission, ignition, fuel delivery, charging and starting, exhaust, electrical, drive-train, braking systems (both hydraulic and air actuated), air comfort, steering, suspension, and hydraulic systems. The incumbent will also perform fabrication and welding duties, operate and maintain shop tools and equipment, and document work performed. Additional duties include TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and shearing of various metals, including steel, aluminum, stainless steel, and cast aluminum. APPOINTMENT INFORMATION Budgeted Salary: $40.27-$50.09/hourly. Salary commensurate with skills, qualifications and experience. Under California law, the University of California, Santa Cruz is required to post a reasonable estimate of the compensation for this role. The salary shown above is the budgeted amount the University reasonably expects to pay and the salary extended should not exceed this posted amount. Benefits Level Eligibility: Full benefits Schedule Information: • Full-time, Fixed • Percentage of Time: 100%, 40 Hours per Week • Days of the Week: Mon-Fri • Shift Includes: Day Employee Classification: Career appointment Job End Date: None Work Location: UC Santa Cruz Main Campus Union Representation: Service Employees (SX) Job Code Classification: HVY DUTY EQUIP TCHN (008476) Travel: Never or Rarely JOB DUTIES 65% - Maintenance/Repair/Metal Fabrication • Performs or assists other Heavy-Duty Equipment Technicians and Automotive Technicians in major repair and maintenance of automotive and heavy-duty vehicles and equipment, including major system overhauls. • Maintains and repairs emission control systems to ensure conformity to all local, state, and Federal emission regulations. • Performs maintenance and repair to vehicles and equipment operating on gasoline, diesel motor fuel, propane, compressed natural gas, and electric-powered vehicles and equipment. • Reads and interprets basic blueprints and executes metal fabrication projects as directed. 15% - Diagnostic • Inspects automotive and heavy equipment to determine corrective action necessary. • Performs drivability diagnosis of computer-controlled systems. • Performs repairs in the most cost-efficient manner possible. 10% - Equipment Operation • Operates vehicles and equipment during the course of maintenance and repair. • Utilizes engine analyzers, emission analyzers. • Operates shop tools and equipment, operate welding and fabrication equipment. 10% - Record Keeping • Prepares maintenance and repair records. • Prepares work orders that accurately reflect time and materials used in the course of repairs. REQUIRED QUALIFICATIONS • Journeyman level experience and skill in automotive heavy vehicle and equipment maintenance and repair. • Experience in the operation and maintenance of tools and special tools used in the course of performing job duties. • Ability to perform welding and fabrication operations required in the course of performing job duties. • Knowledge in the proper use and operation of diagnostic equipment used in the course of performing job duties. • Ability to properly inspect vehicles and equipment for needed maintenance and repairs, and to perform those maintenance and repair operations. • Ability to safely operate University owned vehicles and equipment. • Ability to work both individually and cooperatively with others with minimal or no supervision. • Ability to identify and correct hazardous conditions and to exercise good judgment when to report unsafe and hazardous conditions. • Ability to prioritize work assignments to meet deadlines, flexibility to work with changing workloads and deadlines, good customer service skills and the ability to work with interruptions. • Good interpersonal skills to effectively interact with coworkers and the ability to exercise diplomacy in dealing with diverse groups of people. PREFERRED QUALIFICATIONS • Demonstrated experience completing advanced welding and fabrication projects such as TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and sheering of various metals including but not limited to steel, aluminum, stainless steel, and cast aluminum. SPECIAL CONDITIONS OF EMPLOYMENT • Selected candidate will be required to pass a pre-employment criminal history background check. • Selected candidate must pass the employment misconduct disclosure process. • Must possess a valid license to drive in the state of California and be able to participate in the Department of Motor Vehicles (DMV) pull notice program. • Must possess a valid Class B Commercial license to drive in the State of California, with passenger endorsement and a satisfactory driving record. License must not be restricted to vehicles 15 passengers or less including the driver, but must certify individual to drive passenger vehicles weighing more than 26, 001 gross vehicle weight rating (GVWR) and carrying 20 passengers or more including the driver (DMV CLASS B LICENSE WITH PASSENGER ENDORSEMENT). • Must possess, or obtain within 6 months of hire, a valid California Class B license to drive and participate in the Department of Motor Vehicles (DMV) pull notice program. Must participate in DOT drug testing program. • Ability to safely lift parts, components and supplies while bending, kneeling or stooping with or without accommodation. • Ability to safely push and move equipment weighing up to 160 pounds with or without accommodation. • Must have the ability to: operate a vacuum, floor scrubber, and polisher; use cleaning chemical compounds; perform essential custodial duties including dumping bags into dumpster or moving equipment and materials with or without accommodations. • Ability to occasionally work overtime with little or no advance notice, and work on-call to respond to emergencies after hours as necessary for emergency repairs. • Ability to work shift work, 6AM to 2:30PM. • Ability to work overtime including evenings, nights, weekends and holidays to meet operational needs, and work an alternate work schedule shift as required. • The University of California has implemented a covering all employees. Employees, including new hires, are required to comply with any applicable policies relating to the University of California vaccine program. • Per the Child Abuse and Neglect Reporting Act (CANRA), this position has been identified as a Mandated Reporter. The selected candidate will be required to report known or suspected child abuse or neglect as defined by CANRA and will be required to sign a Statement Acknowledging Requirement to Report Child Abuse prior to commencing employment. CANRA Penal Codes, and related definitions, requirements, and responsibilities may be obtained: leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=PEN&division=&title=1.∂=4.&chapter=2.&article=2.5. MISCONDUCT DISCLOSURE REQUIREMENT . click apply for full job details
11/01/2025
Full time
Heavy Duty Equipment Technician ABOUT UC SANTA CRUZ UC Santa Cruz is a public university like no other in California, combining the experience of a small, liberal arts college with the depth and rigor of a major research university. It's known as an unconventional place where innovation and experimentation is part of the campus's DNA. That playful, bold spirit still thrives today, all on a campus renowned as among the most beautiful in the world. DEPARTMENT OVERVIEW Physical Planning, Development & Operations (PPDO) manages and oversees all University activities and services related to physical and environmental planning, design and construction, engineering, physical plant maintenance and operations, capital planning and space management, and the associated business services necessary to support these functions. The University's main campus is spread across more than 2,000 acres and includes over 500 buildings comprising more than 8 million square feet. The department includes operating budgets of over $48 million, manages a capital project portfolio of approximately $500 million, and employs nearly 300 full-time staff to carry forth the duties necessary for the campus' development and operation. JOB SUMMARY Under the direction of the Fleet Services Technical Staff Supervisor, the Heavy-Duty Equipment Technician performs operational level heavy duty vehicular and equipment maintenance and repair duties. The Heavy Duty Equipment Technician inspects, maintains, repairs, diagnoses, adjusts, and replaces mechanical and electrical components on University-owned vehicles and equipment. Vehicles and equipment maintained include passenger sedans, light duty trucks, vans (both passenger and cargo), medium duty and heavy duty trucks, fire and police vehicles, passenger transport buses, tractors and landscape maintenance equipment, street sweepers, standby generators (1-kw to 150-kw), and other vehicles and equipment used in the day to day operations of the University. Systems and sub-systems maintained and repaired include but are not limited to the following: engine, transmission, ignition, fuel delivery, charging and starting, exhaust, electrical, drive-train, braking systems (both hydraulic and air actuated), air comfort, steering, suspension, and hydraulic systems. The incumbent will also perform fabrication and welding duties, operate and maintain shop tools and equipment, and document work performed. Additional duties include TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and shearing of various metals, including steel, aluminum, stainless steel, and cast aluminum. APPOINTMENT INFORMATION Budgeted Salary: $40.27-$50.09/hourly. Salary commensurate with skills, qualifications and experience. Under California law, the University of California, Santa Cruz is required to post a reasonable estimate of the compensation for this role. The salary shown above is the budgeted amount the University reasonably expects to pay and the salary extended should not exceed this posted amount. Benefits Level Eligibility: Full benefits Schedule Information: • Full-time, Fixed • Percentage of Time: 100%, 40 Hours per Week • Days of the Week: Mon-Fri • Shift Includes: Day Employee Classification: Career appointment Job End Date: None Work Location: UC Santa Cruz Main Campus Union Representation: Service Employees (SX) Job Code Classification: HVY DUTY EQUIP TCHN (008476) Travel: Never or Rarely JOB DUTIES 65% - Maintenance/Repair/Metal Fabrication • Performs or assists other Heavy-Duty Equipment Technicians and Automotive Technicians in major repair and maintenance of automotive and heavy-duty vehicles and equipment, including major system overhauls. • Maintains and repairs emission control systems to ensure conformity to all local, state, and Federal emission regulations. • Performs maintenance and repair to vehicles and equipment operating on gasoline, diesel motor fuel, propane, compressed natural gas, and electric-powered vehicles and equipment. • Reads and interprets basic blueprints and executes metal fabrication projects as directed. 15% - Diagnostic • Inspects automotive and heavy equipment to determine corrective action necessary. • Performs drivability diagnosis of computer-controlled systems. • Performs repairs in the most cost-efficient manner possible. 10% - Equipment Operation • Operates vehicles and equipment during the course of maintenance and repair. • Utilizes engine analyzers, emission analyzers. • Operates shop tools and equipment, operate welding and fabrication equipment. 10% - Record Keeping • Prepares maintenance and repair records. • Prepares work orders that accurately reflect time and materials used in the course of repairs. REQUIRED QUALIFICATIONS • Journeyman level experience and skill in automotive heavy vehicle and equipment maintenance and repair. • Experience in the operation and maintenance of tools and special tools used in the course of performing job duties. • Ability to perform welding and fabrication operations required in the course of performing job duties. • Knowledge in the proper use and operation of diagnostic equipment used in the course of performing job duties. • Ability to properly inspect vehicles and equipment for needed maintenance and repairs, and to perform those maintenance and repair operations. • Ability to safely operate University owned vehicles and equipment. • Ability to work both individually and cooperatively with others with minimal or no supervision. • Ability to identify and correct hazardous conditions and to exercise good judgment when to report unsafe and hazardous conditions. • Ability to prioritize work assignments to meet deadlines, flexibility to work with changing workloads and deadlines, good customer service skills and the ability to work with interruptions. • Good interpersonal skills to effectively interact with coworkers and the ability to exercise diplomacy in dealing with diverse groups of people. PREFERRED QUALIFICATIONS • Demonstrated experience completing advanced welding and fabrication projects such as TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and sheering of various metals including but not limited to steel, aluminum, stainless steel, and cast aluminum. SPECIAL CONDITIONS OF EMPLOYMENT • Selected candidate will be required to pass a pre-employment criminal history background check. • Selected candidate must pass the employment misconduct disclosure process. • Must possess a valid license to drive in the state of California and be able to participate in the Department of Motor Vehicles (DMV) pull notice program. • Must possess a valid Class B Commercial license to drive in the State of California, with passenger endorsement and a satisfactory driving record. License must not be restricted to vehicles 15 passengers or less including the driver, but must certify individual to drive passenger vehicles weighing more than 26, 001 gross vehicle weight rating (GVWR) and carrying 20 passengers or more including the driver (DMV CLASS B LICENSE WITH PASSENGER ENDORSEMENT). • Must possess, or obtain within 6 months of hire, a valid California Class B license to drive and participate in the Department of Motor Vehicles (DMV) pull notice program. Must participate in DOT drug testing program. • Ability to safely lift parts, components and supplies while bending, kneeling or stooping with or without accommodation. • Ability to safely push and move equipment weighing up to 160 pounds with or without accommodation. • Must have the ability to: operate a vacuum, floor scrubber, and polisher; use cleaning chemical compounds; perform essential custodial duties including dumping bags into dumpster or moving equipment and materials with or without accommodations. • Ability to occasionally work overtime with little or no advance notice, and work on-call to respond to emergencies after hours as necessary for emergency repairs. • Ability to work shift work, 6AM to 2:30PM. • Ability to work overtime including evenings, nights, weekends and holidays to meet operational needs, and work an alternate work schedule shift as required. • The University of California has implemented a covering all employees. Employees, including new hires, are required to comply with any applicable policies relating to the University of California vaccine program. • Per the Child Abuse and Neglect Reporting Act (CANRA), this position has been identified as a Mandated Reporter. The selected candidate will be required to report known or suspected child abuse or neglect as defined by CANRA and will be required to sign a Statement Acknowledging Requirement to Report Child Abuse prior to commencing employment. CANRA Penal Codes, and related definitions, requirements, and responsibilities may be obtained: leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=PEN&division=&title=1.∂=4.&chapter=2.&article=2.5. MISCONDUCT DISCLOSURE REQUIREMENT . click apply for full job details
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Mechatronics Maintenance Technician to join our Equipment Services team in various locations across Washington State. As a Mechatronics Maintenance Technician, you will be at the forefront of cutting-edge technology, ensuring that our advanced manufacturing equipment operates at peak performance. Your expertise will be essential in performing preventative maintenance, troubleshooting complex systems, and implementing innovative solutions to enhance operational efficiency. You will work with a wide range of machinery, from automated tooling systems to multi-axis robotic equipment, all while collaborating with a skilled team dedicated to excellence. Your role will not only involve hands-on technical work but also the opportunity to contribute to continuous improvement initiatives that drive our success in the aviation industry. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform routine preventative maintenance on production equipment, tooling, and building systems according to specifications and standardized processes. Repair and replace less complex mechanical and electrical components, such as sensors, relays, and motors, while assisting higher classified employees with more complex systems. Conduct operational checks of machines to ensure proper functionality and performance. Utilize shop tools, including powered and non-powered hand tools, as well as test equipment like multimeters and calipers, for maintenance tasks. Prepare and maintain mechanical maintenance reports, logs, and charts, summarizing information for stakeholders. Inspect equipment as requested to identify necessary repairs and prevent breakdowns or major overhauls. Participate in continuous improvement initiatives, providing recommendations for equipment design and performance enhancements. Gather samples and data for predictive maintenance analysis and collaborate with team members for effective troubleshooting. Follow Hazardous Energy Control Process (HECP) protocols, including lockout/tagout procedures, to ensure safety during maintenance activities. Operate power industrial trucks, floor-operated cranes, and mobile elevating work platforms to move heavy components and equipment safely. Recommend updates to equipment manuals and documentation to reflect current practices and improvements. Work in compliance with environmental, health, and safety regulations to maintain a safe working environment. Coordinate with management, engineering, and equipment vendors to analyze design requirements and order necessary parts and services. Verify accurate setups of downstream equipment, including conveyors and robotic tooling, to ensure seamless operations. Respond to emergency situations and equipment failures, taking appropriate action to mitigate risks. Participate in training sessions to maintain certifications related to safety and equipment operation. Communicate effectively with team members and other departments regarding maintenance activities and equipment status. Monitor and manage the inventory of parts and supplies needed for maintenance tasks. Adapt to new technologies and equipment as they are introduced to the facility. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications : 1+ years of experience working in the field of Mechatronics or an equivalent combination of education and work experience. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Currently possess an Associate's degree or higher in Mechatronics, Industrial Robotics, Electronics or equivalent from an accredited institution of higher learning. Ability to work around electromagnetic fields because of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement : This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $32.10/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
11/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Mechatronics Maintenance Technician to join our Equipment Services team in various locations across Washington State. As a Mechatronics Maintenance Technician, you will be at the forefront of cutting-edge technology, ensuring that our advanced manufacturing equipment operates at peak performance. Your expertise will be essential in performing preventative maintenance, troubleshooting complex systems, and implementing innovative solutions to enhance operational efficiency. You will work with a wide range of machinery, from automated tooling systems to multi-axis robotic equipment, all while collaborating with a skilled team dedicated to excellence. Your role will not only involve hands-on technical work but also the opportunity to contribute to continuous improvement initiatives that drive our success in the aviation industry. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform routine preventative maintenance on production equipment, tooling, and building systems according to specifications and standardized processes. Repair and replace less complex mechanical and electrical components, such as sensors, relays, and motors, while assisting higher classified employees with more complex systems. Conduct operational checks of machines to ensure proper functionality and performance. Utilize shop tools, including powered and non-powered hand tools, as well as test equipment like multimeters and calipers, for maintenance tasks. Prepare and maintain mechanical maintenance reports, logs, and charts, summarizing information for stakeholders. Inspect equipment as requested to identify necessary repairs and prevent breakdowns or major overhauls. Participate in continuous improvement initiatives, providing recommendations for equipment design and performance enhancements. Gather samples and data for predictive maintenance analysis and collaborate with team members for effective troubleshooting. Follow Hazardous Energy Control Process (HECP) protocols, including lockout/tagout procedures, to ensure safety during maintenance activities. Operate power industrial trucks, floor-operated cranes, and mobile elevating work platforms to move heavy components and equipment safely. Recommend updates to equipment manuals and documentation to reflect current practices and improvements. Work in compliance with environmental, health, and safety regulations to maintain a safe working environment. Coordinate with management, engineering, and equipment vendors to analyze design requirements and order necessary parts and services. Verify accurate setups of downstream equipment, including conveyors and robotic tooling, to ensure seamless operations. Respond to emergency situations and equipment failures, taking appropriate action to mitigate risks. Participate in training sessions to maintain certifications related to safety and equipment operation. Communicate effectively with team members and other departments regarding maintenance activities and equipment status. Monitor and manage the inventory of parts and supplies needed for maintenance tasks. Adapt to new technologies and equipment as they are introduced to the facility. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications : 1+ years of experience working in the field of Mechatronics or an equivalent combination of education and work experience. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Currently possess an Associate's degree or higher in Mechatronics, Industrial Robotics, Electronics or equivalent from an accredited institution of higher learning. Ability to work around electromagnetic fields because of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement : This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $32.10/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Mechatronics Maintenance Technician to join our Equipment Services team in various locations across Washington State. As a Mechatronics Maintenance Technician, you will be at the forefront of cutting-edge technology, ensuring that our advanced manufacturing equipment operates at peak performance. Your expertise will be essential in performing preventative maintenance, troubleshooting complex systems, and implementing innovative solutions to enhance operational efficiency. You will work with a wide range of machinery, from automated tooling systems to multi-axis robotic equipment, all while collaborating with a skilled team dedicated to excellence. Your role will not only involve hands-on technical work but also the opportunity to contribute to continuous improvement initiatives that drive our success in the aviation industry. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform routine preventative maintenance on production equipment, tooling, and building systems according to specifications and standardized processes. Repair and replace less complex mechanical and electrical components, such as sensors, relays, and motors, while assisting higher classified employees with more complex systems. Conduct operational checks of machines to ensure proper functionality and performance. Utilize shop tools, including powered and non-powered hand tools, as well as test equipment like multimeters and calipers, for maintenance tasks. Prepare and maintain mechanical maintenance reports, logs, and charts, summarizing information for stakeholders. Inspect equipment as requested to identify necessary repairs and prevent breakdowns or major overhauls. Participate in continuous improvement initiatives, providing recommendations for equipment design and performance enhancements. Gather samples and data for predictive maintenance analysis and collaborate with team members for effective troubleshooting. Follow Hazardous Energy Control Process (HECP) protocols, including lockout/tagout procedures, to ensure safety during maintenance activities. Operate power industrial trucks, floor-operated cranes, and mobile elevating work platforms to move heavy components and equipment safely. Recommend updates to equipment manuals and documentation to reflect current practices and improvements. Work in compliance with environmental, health, and safety regulations to maintain a safe working environment. Coordinate with management, engineering, and equipment vendors to analyze design requirements and order necessary parts and services. Verify accurate setups of downstream equipment, including conveyors and robotic tooling, to ensure seamless operations. Respond to emergency situations and equipment failures, taking appropriate action to mitigate risks. Participate in training sessions to maintain certifications related to safety and equipment operation. Communicate effectively with team members and other departments regarding maintenance activities and equipment status. Monitor and manage the inventory of parts and supplies needed for maintenance tasks. Adapt to new technologies and equipment as they are introduced to the facility. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications : 1+ years of experience working in the field of Mechatronics or an equivalent combination of education and work experience. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Currently possess an Associate's degree or higher in Mechatronics, Industrial Robotics, Electronics or equivalent from an accredited institution of higher learning. Ability to work around electromagnetic fields because of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement : This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $32.10/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
11/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Mechatronics Maintenance Technician to join our Equipment Services team in various locations across Washington State. As a Mechatronics Maintenance Technician, you will be at the forefront of cutting-edge technology, ensuring that our advanced manufacturing equipment operates at peak performance. Your expertise will be essential in performing preventative maintenance, troubleshooting complex systems, and implementing innovative solutions to enhance operational efficiency. You will work with a wide range of machinery, from automated tooling systems to multi-axis robotic equipment, all while collaborating with a skilled team dedicated to excellence. Your role will not only involve hands-on technical work but also the opportunity to contribute to continuous improvement initiatives that drive our success in the aviation industry. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform routine preventative maintenance on production equipment, tooling, and building systems according to specifications and standardized processes. Repair and replace less complex mechanical and electrical components, such as sensors, relays, and motors, while assisting higher classified employees with more complex systems. Conduct operational checks of machines to ensure proper functionality and performance. Utilize shop tools, including powered and non-powered hand tools, as well as test equipment like multimeters and calipers, for maintenance tasks. Prepare and maintain mechanical maintenance reports, logs, and charts, summarizing information for stakeholders. Inspect equipment as requested to identify necessary repairs and prevent breakdowns or major overhauls. Participate in continuous improvement initiatives, providing recommendations for equipment design and performance enhancements. Gather samples and data for predictive maintenance analysis and collaborate with team members for effective troubleshooting. Follow Hazardous Energy Control Process (HECP) protocols, including lockout/tagout procedures, to ensure safety during maintenance activities. Operate power industrial trucks, floor-operated cranes, and mobile elevating work platforms to move heavy components and equipment safely. Recommend updates to equipment manuals and documentation to reflect current practices and improvements. Work in compliance with environmental, health, and safety regulations to maintain a safe working environment. Coordinate with management, engineering, and equipment vendors to analyze design requirements and order necessary parts and services. Verify accurate setups of downstream equipment, including conveyors and robotic tooling, to ensure seamless operations. Respond to emergency situations and equipment failures, taking appropriate action to mitigate risks. Participate in training sessions to maintain certifications related to safety and equipment operation. Communicate effectively with team members and other departments regarding maintenance activities and equipment status. Monitor and manage the inventory of parts and supplies needed for maintenance tasks. Adapt to new technologies and equipment as they are introduced to the facility. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications : 1+ years of experience working in the field of Mechatronics or an equivalent combination of education and work experience. Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: Currently possess an Associate's degree or higher in Mechatronics, Industrial Robotics, Electronics or equivalent from an accredited institution of higher learning. Ability to work around electromagnetic fields because of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement : This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $32.10/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Rochester Regional Health
Clifton Springs, New York
Job Title: ES Floor Technician Department: Environmental Services Location: Clifton Springs Hospital - 2 Coulter Rd, Clifton Springs, NY 14432 Hours Per Week: 40 Schedule: 3:00 PM - 11:30 OM Every other weekend rotation SUMMARY: As an Environmental Services Floor Tech, your strong attention to detail and superior customer service skills are key in maintaining a sanitary, safe and attractive environment throughout the hospital RESPONSIBILITIES: Daily Cleaning. Perform daily cleaning tasks in assigned areas including, but not limited to: washing ceilings and walls; mopping hallways, stairwells and public areas; washing, waxing and/or vacuuming floors Equipment Management. Operate manual, battery-powered and electric equipment; use cleaning equipment such as mechanical floor cleaners, polishers and scrubbers; clean and maintain equipment; monitor assigned areas and equipment for needed repairs and inform supervisor Waste Removal. Gather and dispose of garbage, waste, soiled linen; remove trash in the prescribed manner PREFERRED QUALIFICATIONS: Environmental Services experience preferred. Previous floor care experience preferred EDUCATION: HS (Required) LICENSES / CERTIFICATIONS: NYS DL - valid New York State Driver's License - New York State Department of Motor Vehicles (NYSDMV) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee's physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $18.25 CITY: Clifton Springs POSTAL CODE: 14432 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.
10/31/2025
Full time
Job Title: ES Floor Technician Department: Environmental Services Location: Clifton Springs Hospital - 2 Coulter Rd, Clifton Springs, NY 14432 Hours Per Week: 40 Schedule: 3:00 PM - 11:30 OM Every other weekend rotation SUMMARY: As an Environmental Services Floor Tech, your strong attention to detail and superior customer service skills are key in maintaining a sanitary, safe and attractive environment throughout the hospital RESPONSIBILITIES: Daily Cleaning. Perform daily cleaning tasks in assigned areas including, but not limited to: washing ceilings and walls; mopping hallways, stairwells and public areas; washing, waxing and/or vacuuming floors Equipment Management. Operate manual, battery-powered and electric equipment; use cleaning equipment such as mechanical floor cleaners, polishers and scrubbers; clean and maintain equipment; monitor assigned areas and equipment for needed repairs and inform supervisor Waste Removal. Gather and dispose of garbage, waste, soiled linen; remove trash in the prescribed manner PREFERRED QUALIFICATIONS: Environmental Services experience preferred. Previous floor care experience preferred EDUCATION: HS (Required) LICENSES / CERTIFICATIONS: NYS DL - valid New York State Driver's License - New York State Department of Motor Vehicles (NYSDMV) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee's physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $18.25 CITY: Clifton Springs POSTAL CODE: 14432 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law.
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Preferred: NICET Certification in Fire Alarm Systems Level 2 (required to be obtained within 2 years of employment). Member of the Emergency Response Team (ERT) must maintain CPR/1st Aid/AED (defibrillator) certification; may be obtained within first 6 months on the job. Physical Demands: Up to 66% of the day: Lift and transfer objects which weigh up to 20 pounds from floor to a 36 height (tools, manuals, computer monitors, small batteries). Maximum lift and carry of objects weighing up to 42 pounds from floor to waist height, for a distance of up to 300 feet (10-16-foot ladders). Stand and walk 34-66% of the day and sit 0-33% of the day. 0-33% of the day: Lift and transfer objects weighing 21-42 pounds from floor to a height of 36 and back to the floor (55amp batteries, TV monitors, ladders). 0-33% of the day: Push objects with up to 38 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). Pull objects with up to 52 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). 0-33% of the day: Maximum reach and lift of objects weighting up to 21 pounds from chest height to a height of 68 inches. (Remove and replace 12 V 25-amp batteries above shoulder height while standing on a ladder). Must be able to balance and walk quickly, climb stairs, ladders and inclines, as well as crawl, squat and kneel. Use one or both hands to lift, carry and manipulate small objects, and move trunk forward, backward, and side to side. Work involves driving, hearing, the ability to communicate. Work involves seeing, including peripheral vision and depth perception. Work involves the ability to discriminate colors. Working Conditions: Work is inside and outside, with and around others. May also be required to work alone May be required to work in cramped workspaces up to 33% of the day Potential environmental hazards in the form of: Dust Physical hazard exposures include the potential for: Heat, Cold, Low-level noise (in the penthouse and around the air handling units) Mechanical/ergonomic hazard exposures include the potential for: Lifting, pulling, pushing and reaching; Awkward postures Biological Hazards: Potential for blood/body fluid exposure related to participation on the Emergency Response Team Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $27.01 Pay Range - End: $40.51 Geographic Specific Pay Structure: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. FIND YOUR FUTURE We're excited about the potential people bring to Northwestern Mutual. You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging. Flexible work schedules Concierge service Comprehensive benefits Employee resource groups PandoLogic. Category:Installation & Maintenance,
10/07/2025
Full time
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Preferred: NICET Certification in Fire Alarm Systems Level 2 (required to be obtained within 2 years of employment). Member of the Emergency Response Team (ERT) must maintain CPR/1st Aid/AED (defibrillator) certification; may be obtained within first 6 months on the job. Physical Demands: Up to 66% of the day: Lift and transfer objects which weigh up to 20 pounds from floor to a 36 height (tools, manuals, computer monitors, small batteries). Maximum lift and carry of objects weighing up to 42 pounds from floor to waist height, for a distance of up to 300 feet (10-16-foot ladders). Stand and walk 34-66% of the day and sit 0-33% of the day. 0-33% of the day: Lift and transfer objects weighing 21-42 pounds from floor to a height of 36 and back to the floor (55amp batteries, TV monitors, ladders). 0-33% of the day: Push objects with up to 38 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). Pull objects with up to 52 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). 0-33% of the day: Maximum reach and lift of objects weighting up to 21 pounds from chest height to a height of 68 inches. (Remove and replace 12 V 25-amp batteries above shoulder height while standing on a ladder). Must be able to balance and walk quickly, climb stairs, ladders and inclines, as well as crawl, squat and kneel. Use one or both hands to lift, carry and manipulate small objects, and move trunk forward, backward, and side to side. Work involves driving, hearing, the ability to communicate. Work involves seeing, including peripheral vision and depth perception. Work involves the ability to discriminate colors. Working Conditions: Work is inside and outside, with and around others. May also be required to work alone May be required to work in cramped workspaces up to 33% of the day Potential environmental hazards in the form of: Dust Physical hazard exposures include the potential for: Heat, Cold, Low-level noise (in the penthouse and around the air handling units) Mechanical/ergonomic hazard exposures include the potential for: Lifting, pulling, pushing and reaching; Awkward postures Biological Hazards: Potential for blood/body fluid exposure related to participation on the Emergency Response Team Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $27.01 Pay Range - End: $40.51 Geographic Specific Pay Structure: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. FIND YOUR FUTURE We're excited about the potential people bring to Northwestern Mutual. You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging. Flexible work schedules Concierge service Comprehensive benefits Employee resource groups PandoLogic. Category:Installation & Maintenance,
Overview: Interstate Waste Services is looking for a Full- Time experienced diesel mechanic. MUST have at least 1 to 2 years heavy truck diesel mechanic experience. FULL Time 2nd Shift - Monday thru Friday 12PM to 10PM with 1 or 2 Saturday's a month as needed. Pay is commensurate with experience. Pay range is $27 to $35 an hour. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process Conducts safety checks on vehicles and equipment during Safety Lane and PM's. Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule Ability to learn and utilize brake inspection procedures and complete documentation daily Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body. Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs. Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner. Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas. Conducts repairs utilizing Factory Service Manuals. Maintain high standard of Ethics and Dependability. Follows all safety policies and procedures. Requirements and Qualifications Ability to assist drivers with Pre/Post trip process Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc. Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid Knowledge of tire inspections and air pressure adjustments Ability to support technicians in repair of lights, wipers, mirrors. Ability to understand and use lubrication charts for waste trucks Ability to lubricate components on trucks as scheduled (training provided) Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks. Knowledge of all tools required to perform repairs and maintenance on vehicles. Basic computer skills as required. OTHER JOB RESPONSIBILITIES: Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate Any additional job duties that may be assigned by the Supervisor. Exposure to chemical and residential waste. Walking, Jogging, Twisting, Crouching, Lifting Sufficient stamina for steady work pace throughout the day Able to utilize all Personal Protective Equipment as mandated by company Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day Physically able to lift 50 to 75 pounds from the floor to waist height unassisted Physically able to lift 50 pounds from the floor to shoulder height unassisted Physically able to lift 50 pounds form the floor to overhead unassisted Physically able to push and pull 50 pounds unassisted Physically able to frequently (100-200 times) bend at the knees and waist Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work Physically able to frequently (100-200 times) twist at the waist to perform work Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.
10/06/2025
Full time
Overview: Interstate Waste Services is looking for a Full- Time experienced diesel mechanic. MUST have at least 1 to 2 years heavy truck diesel mechanic experience. FULL Time 2nd Shift - Monday thru Friday 12PM to 10PM with 1 or 2 Saturday's a month as needed. Pay is commensurate with experience. Pay range is $27 to $35 an hour. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process Conducts safety checks on vehicles and equipment during Safety Lane and PM's. Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule Ability to learn and utilize brake inspection procedures and complete documentation daily Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body. Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs. Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner. Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas. Conducts repairs utilizing Factory Service Manuals. Maintain high standard of Ethics and Dependability. Follows all safety policies and procedures. Requirements and Qualifications Ability to assist drivers with Pre/Post trip process Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc. Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid Knowledge of tire inspections and air pressure adjustments Ability to support technicians in repair of lights, wipers, mirrors. Ability to understand and use lubrication charts for waste trucks Ability to lubricate components on trucks as scheduled (training provided) Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks. Knowledge of all tools required to perform repairs and maintenance on vehicles. Basic computer skills as required. OTHER JOB RESPONSIBILITIES: Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate Any additional job duties that may be assigned by the Supervisor. Exposure to chemical and residential waste. Walking, Jogging, Twisting, Crouching, Lifting Sufficient stamina for steady work pace throughout the day Able to utilize all Personal Protective Equipment as mandated by company Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day Physically able to lift 50 to 75 pounds from the floor to waist height unassisted Physically able to lift 50 pounds from the floor to shoulder height unassisted Physically able to lift 50 pounds form the floor to overhead unassisted Physically able to push and pull 50 pounds unassisted Physically able to frequently (100-200 times) bend at the knees and waist Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work Physically able to frequently (100-200 times) twist at the waist to perform work Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.
Overview: Interstate Waste Services is looking for a Full- Time experienced diesel mechanic. MUST have at least 1 to 2 years heavy truck diesel mechanic experience. FULL Time 2nd Shift - Monday thru Friday 12PM to 10PM with 1 or 2 Saturday's a month as needed. Pay is commensurate with experience. Pay range is $27 to $35 an hour. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process Conducts safety checks on vehicles and equipment during Safety Lane and PM's. Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule Ability to learn and utilize brake inspection procedures and complete documentation daily Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body. Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs. Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner. Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas. Conducts repairs utilizing Factory Service Manuals. Maintain high standard of Ethics and Dependability. Follows all safety policies and procedures. Requirements and Qualifications Ability to assist drivers with Pre/Post trip process Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc. Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid Knowledge of tire inspections and air pressure adjustments Ability to support technicians in repair of lights, wipers, mirrors. Ability to understand and use lubrication charts for waste trucks Ability to lubricate components on trucks as scheduled (training provided) Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks. Knowledge of all tools required to perform repairs and maintenance on vehicles. Basic computer skills as required. OTHER JOB RESPONSIBILITIES: Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate Any additional job duties that may be assigned by the Supervisor. Exposure to chemical and residential waste. Walking, Jogging, Twisting, Crouching, Lifting Sufficient stamina for steady work pace throughout the day Able to utilize all Personal Protective Equipment as mandated by company Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day Physically able to lift 50 to 75 pounds from the floor to waist height unassisted Physically able to lift 50 pounds from the floor to shoulder height unassisted Physically able to lift 50 pounds form the floor to overhead unassisted Physically able to push and pull 50 pounds unassisted Physically able to frequently (100-200 times) bend at the knees and waist Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work Physically able to frequently (100-200 times) twist at the waist to perform work Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.
10/06/2025
Full time
Overview: Interstate Waste Services is looking for a Full- Time experienced diesel mechanic. MUST have at least 1 to 2 years heavy truck diesel mechanic experience. FULL Time 2nd Shift - Monday thru Friday 12PM to 10PM with 1 or 2 Saturday's a month as needed. Pay is commensurate with experience. Pay range is $27 to $35 an hour. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process Conducts safety checks on vehicles and equipment during Safety Lane and PM's. Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule Ability to learn and utilize brake inspection procedures and complete documentation daily Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body. Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs. Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner. Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas. Conducts repairs utilizing Factory Service Manuals. Maintain high standard of Ethics and Dependability. Follows all safety policies and procedures. Requirements and Qualifications Ability to assist drivers with Pre/Post trip process Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc. Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid Knowledge of tire inspections and air pressure adjustments Ability to support technicians in repair of lights, wipers, mirrors. Ability to understand and use lubrication charts for waste trucks Ability to lubricate components on trucks as scheduled (training provided) Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks. Knowledge of all tools required to perform repairs and maintenance on vehicles. Basic computer skills as required. OTHER JOB RESPONSIBILITIES: Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate Any additional job duties that may be assigned by the Supervisor. Exposure to chemical and residential waste. Walking, Jogging, Twisting, Crouching, Lifting Sufficient stamina for steady work pace throughout the day Able to utilize all Personal Protective Equipment as mandated by company Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day Physically able to lift 50 to 75 pounds from the floor to waist height unassisted Physically able to lift 50 pounds from the floor to shoulder height unassisted Physically able to lift 50 pounds form the floor to overhead unassisted Physically able to push and pull 50 pounds unassisted Physically able to frequently (100-200 times) bend at the knees and waist Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work Physically able to frequently (100-200 times) twist at the waist to perform work Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Preferred: NICET Certification in Fire Alarm Systems Level 2 (required to be obtained within 2 years of employment). Member of the Emergency Response Team (ERT) must maintain CPR/1st Aid/AED (defibrillator) certification; may be obtained within first 6 months on the job. Physical Demands: Up to 66% of the day: Lift and transfer objects which weigh up to 20 pounds from floor to a 36 height (tools, manuals, computer monitors, small batteries). Maximum lift and carry of objects weighing up to 42 pounds from floor to waist height, for a distance of up to 300 feet (10-16-foot ladders). Stand and walk 34-66% of the day and sit 0-33% of the day. 0-33% of the day: Lift and transfer objects weighing 21-42 pounds from floor to a height of 36 and back to the floor (55amp batteries, TV monitors, ladders). 0-33% of the day: Push objects with up to 38 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). Pull objects with up to 52 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). 0-33% of the day: Maximum reach and lift of objects weighting up to 21 pounds from chest height to a height of 68 inches. (Remove and replace 12 V 25-amp batteries above shoulder height while standing on a ladder). Must be able to balance and walk quickly, climb stairs, ladders and inclines, as well as crawl, squat and kneel. Use one or both hands to lift, carry and manipulate small objects, and move trunk forward, backward, and side to side. Work involves driving, hearing, the ability to communicate. Work involves seeing, including peripheral vision and depth perception. Work involves the ability to discriminate colors. Working Conditions: Work is inside and outside, with and around others. May also be required to work alone May be required to work in cramped workspaces up to 33% of the day Potential environmental hazards in the form of: Dust Physical hazard exposures include the potential for: Heat, Cold, Low-level noise (in the penthouse and around the air handling units) Mechanical/ergonomic hazard exposures include the potential for: Lifting, pulling, pushing and reaching; Awkward postures Biological Hazards: Potential for blood/body fluid exposure related to participation on the Emergency Response Team Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $27.01 Pay Range - End: $40.51 Geographic Specific Pay Structure: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. FIND YOUR FUTURE We're excited about the potential people bring to Northwestern Mutual. You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging. Flexible work schedules Concierge service Comprehensive benefits Employee resource groups PandoLogic. Category:Installation & Maintenance,
10/05/2025
Full time
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Preferred: NICET Certification in Fire Alarm Systems Level 2 (required to be obtained within 2 years of employment). Member of the Emergency Response Team (ERT) must maintain CPR/1st Aid/AED (defibrillator) certification; may be obtained within first 6 months on the job. Physical Demands: Up to 66% of the day: Lift and transfer objects which weigh up to 20 pounds from floor to a 36 height (tools, manuals, computer monitors, small batteries). Maximum lift and carry of objects weighing up to 42 pounds from floor to waist height, for a distance of up to 300 feet (10-16-foot ladders). Stand and walk 34-66% of the day and sit 0-33% of the day. 0-33% of the day: Lift and transfer objects weighing 21-42 pounds from floor to a height of 36 and back to the floor (55amp batteries, TV monitors, ladders). 0-33% of the day: Push objects with up to 38 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). Pull objects with up to 52 pounds of force for a distance of 20 feet over smooth hard surfaces (Inside lift). 0-33% of the day: Maximum reach and lift of objects weighting up to 21 pounds from chest height to a height of 68 inches. (Remove and replace 12 V 25-amp batteries above shoulder height while standing on a ladder). Must be able to balance and walk quickly, climb stairs, ladders and inclines, as well as crawl, squat and kneel. Use one or both hands to lift, carry and manipulate small objects, and move trunk forward, backward, and side to side. Work involves driving, hearing, the ability to communicate. Work involves seeing, including peripheral vision and depth perception. Work involves the ability to discriminate colors. Working Conditions: Work is inside and outside, with and around others. May also be required to work alone May be required to work in cramped workspaces up to 33% of the day Potential environmental hazards in the form of: Dust Physical hazard exposures include the potential for: Heat, Cold, Low-level noise (in the penthouse and around the air handling units) Mechanical/ergonomic hazard exposures include the potential for: Lifting, pulling, pushing and reaching; Awkward postures Biological Hazards: Potential for blood/body fluid exposure related to participation on the Emergency Response Team Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $27.01 Pay Range - End: $40.51 Geographic Specific Pay Structure: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. FIND YOUR FUTURE We're excited about the potential people bring to Northwestern Mutual. You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging. Flexible work schedules Concierge service Comprehensive benefits Employee resource groups PandoLogic. Category:Installation & Maintenance,
Rochester Regional Health
Clifton Springs, New York
Job Title: ES Floor Technician Department: Environmental Services Location: Clifton Springs Hospital - 2 Coulter Rd, Clifton Springs, NY 14432 Hours Per Week: 40 Schedule: 3:00 PM - 11:30 OM Every other weekend rotation SUMMARY: As an Environmental Services Floor Tech, your strong attention to detail and superior customer service skills are key in maintaining a sanitary, safe and attractive environment throughout the hospital RESPONSIBILITIES: Daily Cleaning. Perform daily cleaning tasks in assigned areas including, but not limited to: washing ceilings and walls; mopping hallways, stairwells and public areas; washing, waxing and/or vacuuming floors Equipment Management. Operate manual, battery-powered and electric equipment; use cleaning equipment such as mechanical floor cleaners, polishers and scrubbers; clean and maintain equipment; monitor assigned areas and equipment for needed repairs and inform supervisor Waste Removal. Gather and dispose of garbage, waste, soiled linen; remove trash in the prescribed manner PREFERRED QUALIFICATIONS: Environmental Services experience preferred. Previous floor care experience preferred EDUCATION: HS (Required) LICENSES / CERTIFICATIONS: NYS DL - valid New York State Driver's License - New York State Department of Motor Vehicles (NYSDMV) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee's physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $18.25 CITY: Clifton Springs POSTAL CODE: 14432 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law. By applying, you consent to your information being transmitted by Veritone to the Employer, as data controller, through the Employer's data processor SonicJobs. See Rochester Regional Health Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at PandoLogic. Category:Building Maintenance,
10/05/2025
Full time
Job Title: ES Floor Technician Department: Environmental Services Location: Clifton Springs Hospital - 2 Coulter Rd, Clifton Springs, NY 14432 Hours Per Week: 40 Schedule: 3:00 PM - 11:30 OM Every other weekend rotation SUMMARY: As an Environmental Services Floor Tech, your strong attention to detail and superior customer service skills are key in maintaining a sanitary, safe and attractive environment throughout the hospital RESPONSIBILITIES: Daily Cleaning. Perform daily cleaning tasks in assigned areas including, but not limited to: washing ceilings and walls; mopping hallways, stairwells and public areas; washing, waxing and/or vacuuming floors Equipment Management. Operate manual, battery-powered and electric equipment; use cleaning equipment such as mechanical floor cleaners, polishers and scrubbers; clean and maintain equipment; monitor assigned areas and equipment for needed repairs and inform supervisor Waste Removal. Gather and dispose of garbage, waste, soiled linen; remove trash in the prescribed manner PREFERRED QUALIFICATIONS: Environmental Services experience preferred. Previous floor care experience preferred EDUCATION: HS (Required) LICENSES / CERTIFICATIONS: NYS DL - valid New York State Driver's License - New York State Department of Motor Vehicles (NYSDMV) PHYSICAL REQUIREMENTS: M - Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects; Requires frequent walking, standing or squatting. For disease specific care programs refer to the program specific requirements of the department for further specifications on experience and educational expectations, including continuing education requirements. Any physical requirements reported by a prospective employee and/or employee's physician or delegate will be considered for accommodations. PAY RANGE: $17.25 - $18.25 CITY: Clifton Springs POSTAL CODE: 14432 The listed base pay range is a good faith representation of current potential base pay for a successful full time applicant. It may be modified in the future and eligible for additional pay components. Pay is determined by factors including experience, relevant qualifications, specialty, internal equity, location, and contracts. Rochester Regional Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, predisposing genetic characteristics, marital or familial status, military or veteran status, citizenship or immigration status, or any other characteristic protected by federal, state, or local law. By applying, you consent to your information being transmitted by Veritone to the Employer, as data controller, through the Employer's data processor SonicJobs. See Rochester Regional Health Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at PandoLogic. Category:Building Maintenance,
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
10/04/2025
Full time
POSITION: WASTE WATER TECHNICIAN SHIFT: 5 pm - 3:00 am and Rotating Saturdays REPORTS TO: MANAGER - ENVIRONMENTAL HEALTH & SAFETY BENEFITS & PERKS WASTE WATER TECHNICIAN Top Work Place Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K/Profit Sharing Generous PTO Bonus Potential (Referral Bonus &Years of Service Bonus) SCOPE WASTE WATER TECHNICIAN Serve as equipment operator for (2) separate industrial pretreatment plants on-site. Perform maintenance and troubleshooting of all treatment equipment, as well as other mechanical & electrical components. Monitor the entire industrial pretreatment system, collaborating with Operations, Engineering & Maintenance departments; to ensure wastewater effluent is compliant with City Permit limits. Receive and process up to 220,000 gallons of water per day. KEY RESPONSIBILITIES WASTE WATER TECHNICIAN Use a variety of hand and power tools, to perform routine and emergency maintenance tasks, including but not limited to troubleshooting & repairs of: Pumps centrifugal, air-operated diaphragm, rotary lobe, double-disc (mechanical seals, gaskets, impellers, etc) Process piping valves (automated, manual ball valves, butterfly, etc) Electrical motors (associated with pumps, mixers, etc) Chemical dosing pumps (acid, caustic, polymers, etc) Instrumentation (pH sensor, temperature probes, level sensors) Various other mechanical components Serve as primary operator for ALL equipment components at each of the (2) separate industrial pretreatment plants. Major equipment listed below: Dissolved Air Flotation (DAF) equipment, primary pretreatment device Rotary drum screen and solids compactor/auger (4) different lift stations, associated pumps and piping/valves Screw Press for de-watering sludge Tricanter (3-phase) Centrifuge for separating pure oil for re-sale Proficiency in the use of wastewater treatment chemicals, including but not limited to: Sulfuric Acid, Sodium Hydroxide, Polymers, Coagulant, Sodium Nitrate Must be able to record/log data accurately and understand trend-line displays, to ensure safe operating conditions are maintained. Must be able to navigate various HMI control panels to adjust setpoints, view tank levels, troubleshoot alarms, etc. Responsible for monitoring various bulk tanks, to ensure safe operating conditions are maintained, such as level, temperature, pH, mixing equipment, CIP processes 200,000 gallon EQ tank 50,000 gallon sludge holding tank 15,000 gallon centrifuge feed tank 6,000 gallon sludge balance tank 5,000 gallon coagulant chemical tank Must comply with all JTM safety policies, including but not limited to: Chemical Handling & Storage Personal Protective Equipment (PPE) Fall Protection Lockout/Tagout (LOTO) Must understand JTM's spill policy, including how to respond to an uncontrolled release/spill (diking, containment, reporting, etc.) Coordinate with contracted waste disposal services for pick-up and scheduling. Must be able to operate forklifts, scissor lifts, and aerial boom lifts Must be able to perform daily cleaning tasks, including high-pressure washing floors, tanks, equipment components, etc. Must be able to climb ladders, work on elevated platforms, rake/shovel solid waste, occasionally lift heavy items (50-60lbs) Other duties and/or special projects as assigned by Supervisor/Manager SUCCESS CRITERIA WASTE WATER TECHNICIAN Safety/GMP/Food Safety/Quality policies followed BRC Compliance Reporting accuracy Waste water Treatment Policies followed 100% Attendance requirements met EXPERIENCE AND SKILL REQUIREMENTS: - WASTE WATER TECHNICIAN At least 6 months of previous experience in manufacturing environment and/or maintenance operations Able to build strong relationships, provide customer service, and problem solve. Requires a High School diploma or GED Must be highly motivated and able to work independently and as part of a team. Knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunctions, and perform preventative maintenance/repair as needed. Ability to use Microsoft Applications (Word, Excel, PowerPoint, Teams) Good written and verbal communications skills. Ability to work a flexible schedule as required arriving early, staying late and/or weekends. This position is an onsite position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify. PI969533b3f1-
Fayetteville State University
Fayetteville, North Carolina
Position Title Building Environmental Services Technician Working Title Housekeeper Position Number 001681 Full-time or Part-time Full Time Time Limited Position No Number of Vacancies 1 Department Facilities Management Posting Number SHRA/EHRA SHRA Job Category Service/Maintenance Hiring Range $33,540.00 - $34,320.00 Overall Position Competency Contributing Primary Purpose of the Organization The Division of Facilities Management functions are to design, construct, maintain and operate the physical facilities of the University. The number one objective of the department is to provide and maintain facilities that will enhance and support the mission and academic goals of the University. Our approach is centered upon providing a superior level of customer service. Primary Purpose of the Position This position provides daily routine and detail cleaning of campus building interior and exterior areas (25 feet from entrance) including but not limited to offices, lounges, restrooms, classrooms, laboratories, entrances, exits, and stairways. General duties include vacuuming, sweeping, mopping, dusting, floor care, and trash removal. Minimum Education and Experience Requirements Some knowledge of cleaning procedures, ability to follow instructions and to perform medium to heavy physical work; or an equivalent combination of training and experience. A valid driver's license. Must have and maintain an acceptable driving record, preferably five or more years of driving experience with no more than one minor at fault accident or violation in the past three years. Knowledge skills and abilities Knowledge-Technical : Performs basic cleaning such as sweeping, mopping, scrubbing dusting, disinfecting, vacuuming, etc. to keep working areas in a clean and orderly condition. Fills dispensers, such as tissue and soap dispensers, with the proper product and amount. Customer Service : Recognizes potential problems in service and addresses and resolves promptly and respectfully. Communication: Listens to instructions asks necessary questions to complete tasks. Safety/Health Compliance : Services and or replaces cleaning and maintenance machinery equipment and machinery. Interpersonal Skills: Develops and maintains effective working relationships with others in order to encourage and support communication and teamwork. Preferred Qualifications Minimum of one year of experience performing housekeeping duties in a university or commercial environment. Special Instructions to Applicants The application must be completed in full detail (including work history) for your qualifications to be considered.Failure to complete the application completely may result in you not being considered for the vacant position. Notice to Applicants Please make sure that the work history listed on your application is identical to the work history listed on your resume. The application must be filled out completely, Do Not Use the phrase "see resume." Please list at least three (3) professional references to include a current supervisor. References will only be contact if you are selected for the position and with your permission. Closing Date 10/12/2025 Open Until Filled No Other Information If no applicants apply who meet the required competency level and training & experience requirements, then management may consider other applicants. Salary would be determined based on competencies, equity, budget, and market considerations. EEO Statement This position is subject to the successful completion of an employment background check. An employment background check includes a criminal background check, employment verification, reference checks, license verification (if applicable), academic verification and credit history check (if applicable). Fayetteville State University is committed to equality of educational opportunity and employment and does not discriminate against applicants, students, or employees based on race, color, national origin, religion, sex, gender identity, sexual orientation, age, disability, genetic information or veteran status. Moreover, Fayetteville State University values diversity and actively seeks to recruit talented students, faculty, and staff from diverse backgrounds. Veteran's Statement Fayetteville State University is a VEVRAA Federal Contractor and seeks priority referrals of protected veterans for our openings. Quick Link:
10/03/2025
Full time
Position Title Building Environmental Services Technician Working Title Housekeeper Position Number 001681 Full-time or Part-time Full Time Time Limited Position No Number of Vacancies 1 Department Facilities Management Posting Number SHRA/EHRA SHRA Job Category Service/Maintenance Hiring Range $33,540.00 - $34,320.00 Overall Position Competency Contributing Primary Purpose of the Organization The Division of Facilities Management functions are to design, construct, maintain and operate the physical facilities of the University. The number one objective of the department is to provide and maintain facilities that will enhance and support the mission and academic goals of the University. Our approach is centered upon providing a superior level of customer service. Primary Purpose of the Position This position provides daily routine and detail cleaning of campus building interior and exterior areas (25 feet from entrance) including but not limited to offices, lounges, restrooms, classrooms, laboratories, entrances, exits, and stairways. General duties include vacuuming, sweeping, mopping, dusting, floor care, and trash removal. Minimum Education and Experience Requirements Some knowledge of cleaning procedures, ability to follow instructions and to perform medium to heavy physical work; or an equivalent combination of training and experience. A valid driver's license. Must have and maintain an acceptable driving record, preferably five or more years of driving experience with no more than one minor at fault accident or violation in the past three years. Knowledge skills and abilities Knowledge-Technical : Performs basic cleaning such as sweeping, mopping, scrubbing dusting, disinfecting, vacuuming, etc. to keep working areas in a clean and orderly condition. Fills dispensers, such as tissue and soap dispensers, with the proper product and amount. Customer Service : Recognizes potential problems in service and addresses and resolves promptly and respectfully. Communication: Listens to instructions asks necessary questions to complete tasks. Safety/Health Compliance : Services and or replaces cleaning and maintenance machinery equipment and machinery. Interpersonal Skills: Develops and maintains effective working relationships with others in order to encourage and support communication and teamwork. Preferred Qualifications Minimum of one year of experience performing housekeeping duties in a university or commercial environment. Special Instructions to Applicants The application must be completed in full detail (including work history) for your qualifications to be considered.Failure to complete the application completely may result in you not being considered for the vacant position. Notice to Applicants Please make sure that the work history listed on your application is identical to the work history listed on your resume. The application must be filled out completely, Do Not Use the phrase "see resume." Please list at least three (3) professional references to include a current supervisor. References will only be contact if you are selected for the position and with your permission. Closing Date 10/12/2025 Open Until Filled No Other Information If no applicants apply who meet the required competency level and training & experience requirements, then management may consider other applicants. Salary would be determined based on competencies, equity, budget, and market considerations. EEO Statement This position is subject to the successful completion of an employment background check. An employment background check includes a criminal background check, employment verification, reference checks, license verification (if applicable), academic verification and credit history check (if applicable). Fayetteville State University is committed to equality of educational opportunity and employment and does not discriminate against applicants, students, or employees based on race, color, national origin, religion, sex, gender identity, sexual orientation, age, disability, genetic information or veteran status. Moreover, Fayetteville State University values diversity and actively seeks to recruit talented students, faculty, and staff from diverse backgrounds. Veteran's Statement Fayetteville State University is a VEVRAA Federal Contractor and seeks priority referrals of protected veterans for our openings. Quick Link:
CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician to join our team in Livonia, MI! Key Responsibilities May Include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. This is a 2nd Shift role (Mon-Fri 2pm-11:30pm). Once hired, training will be on 1st shift hours within the first 60 days before transitioning to the assigned shift Person will be responsible for PMs on equipment including but not limited to: electric forklifts, dock doors, grinder, air compressors, pumps, etc. Livonia site has 13 repair stations that include conveyors, stackers, paint stations and one robot Hands-on experience with mechanical, electrical and electronic troubleshooting as low as 5 VDC to as high as 480 VAC Additional tasks include automation projects, new equipment installations and continuous improvements Schedule: Monday to Friday 2:00pm-11:30pm, after initial 60-days training on 1st shift Position Purpose: As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. The Maintenance Technician 1 will adhere to all health and safety policies and directives and maintain a clean safe work area. This position partners with internal and external engineering services and local parts vendors to ensure automated equipment operates at the highest level of efficiencies and will advocate improvement projects as assigned. Major/Key Accountabilities: Responsible for hands on maintenance, troubleshooting and repair of all plant pneumatics, hydraulics, and electric systems including program logic control (PLC) systems controls machine network devices (EthernetIP Network). The Maintenance Technician 2 will diagnose and repair mechanical and electrical failures in all plant manufacturing equipment. This includes, but is not limited to, conveyers, process pallet handling machines, dismantling, painting and stencilling systems. Responsible for hands on maintenance, troubleshooting and repair of all process hand tools, such as pneumatic or electric reciprocating saws and nail guns Performs minor unscheduled maintenance and repair on trucking equipment such as forklifts and yard shuttle trucks The Maintenance Technician 1 is responsible for accurate and timely documentation of performance and processes as required by local and regional leadership. The Maintenance Technician 2 will schedule, execute and properly document work orders within the corporate Computerized Maintenance Management System (CMMS). The Maintenance Technician 1 will accurately complete additional scheduling and repair material documentation and reporting as required. Active participation in machine process and design improvement forums is required. The Maintenance Technician 2 will provide coaching on use and repair of industrial production equipment. Maintenance Technician 1 will participate in health and safety programs including council or committee meetings, OSHA and corporate mandated training, certification and recertification. Basic use of welding/cutting equipment. And any other duties as assigned. Qualifications: Mechanically inclined - Knowledge of and demonstrable ability to use common mechanics tools. Willing to work non-traditional hours including nights, weekends and holidays with on-call availability. Associate's degree or equivalent experience. Ability to stand and walk on concrete floors for up to 12 hours and lift 75 pounds. Ability to read and use mechanical and electrical schematics for troubleshooting. Ability to use an electrical Multimeter for troubleshooting. Understanding of and ability to troubleshoot and repair industrial pneumatic and hydraulic system components, such as pumps, valves, cylinders, motors and solenoids. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Understanding of industrial air compressors and peripheral components such as, dryers, water separators and automatic bleed off. Experience: This position requires demonstrated experience in maintaining and repairing plant production equipment. Specific areas of expertise include: 3-5 years of experience in industrial machine maintenance. Knowledge of HMI operation and troubleshooting. Proven track record of production machine maintenance and repair success. History of effectively working in a team environment. Demonstrated success handling multiple high priority projects, in addition to normal responsibilities. Skills and Knowledge: This position requires knowledge in maintaining and repairing plant production equipment. Specific areas of expertise include: Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic (RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience Mechanical Knowledge Chain Drive Live Roller Conveyor systems Chain Conveyors Belt Conveyors Hydraulics pumps and circuits Air compressors Pneumatic circuits valves General Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. NEC 70E electrical Safety. Ability to use Computerized Maintenance Management Systems (CMMS). Strong written and verbal communication skills. Physical Requirements: May require standing for long periods of time, intermittent stooping/bending, pushing/pulling, reaching above shoulder, and repetitively rotating hand/wrist/forearm with or without accommodation. Working Conditions: The role involves working in a warehouse or manufacturing environment. Exposure to noise, dust, and varying temperatures may occur. Personal protective equipment (PPE) required. What we Offer: Competitive Pay + Annual Bonus Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance Employee Stock Match Program! Tuition reimbursement, parental leave, childcare assistance, profit sharing, wellness incentives and MORE! Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer . click apply for full job details
10/03/2025
Full time
CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician to join our team in Livonia, MI! Key Responsibilities May Include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. This is a 2nd Shift role (Mon-Fri 2pm-11:30pm). Once hired, training will be on 1st shift hours within the first 60 days before transitioning to the assigned shift Person will be responsible for PMs on equipment including but not limited to: electric forklifts, dock doors, grinder, air compressors, pumps, etc. Livonia site has 13 repair stations that include conveyors, stackers, paint stations and one robot Hands-on experience with mechanical, electrical and electronic troubleshooting as low as 5 VDC to as high as 480 VAC Additional tasks include automation projects, new equipment installations and continuous improvements Schedule: Monday to Friday 2:00pm-11:30pm, after initial 60-days training on 1st shift Position Purpose: As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. The Maintenance Technician 1 will adhere to all health and safety policies and directives and maintain a clean safe work area. This position partners with internal and external engineering services and local parts vendors to ensure automated equipment operates at the highest level of efficiencies and will advocate improvement projects as assigned. Major/Key Accountabilities: Responsible for hands on maintenance, troubleshooting and repair of all plant pneumatics, hydraulics, and electric systems including program logic control (PLC) systems controls machine network devices (EthernetIP Network). The Maintenance Technician 2 will diagnose and repair mechanical and electrical failures in all plant manufacturing equipment. This includes, but is not limited to, conveyers, process pallet handling machines, dismantling, painting and stencilling systems. Responsible for hands on maintenance, troubleshooting and repair of all process hand tools, such as pneumatic or electric reciprocating saws and nail guns Performs minor unscheduled maintenance and repair on trucking equipment such as forklifts and yard shuttle trucks The Maintenance Technician 1 is responsible for accurate and timely documentation of performance and processes as required by local and regional leadership. The Maintenance Technician 2 will schedule, execute and properly document work orders within the corporate Computerized Maintenance Management System (CMMS). The Maintenance Technician 1 will accurately complete additional scheduling and repair material documentation and reporting as required. Active participation in machine process and design improvement forums is required. The Maintenance Technician 2 will provide coaching on use and repair of industrial production equipment. Maintenance Technician 1 will participate in health and safety programs including council or committee meetings, OSHA and corporate mandated training, certification and recertification. Basic use of welding/cutting equipment. And any other duties as assigned. Qualifications: Mechanically inclined - Knowledge of and demonstrable ability to use common mechanics tools. Willing to work non-traditional hours including nights, weekends and holidays with on-call availability. Associate's degree or equivalent experience. Ability to stand and walk on concrete floors for up to 12 hours and lift 75 pounds. Ability to read and use mechanical and electrical schematics for troubleshooting. Ability to use an electrical Multimeter for troubleshooting. Understanding of and ability to troubleshoot and repair industrial pneumatic and hydraulic system components, such as pumps, valves, cylinders, motors and solenoids. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Understanding of industrial air compressors and peripheral components such as, dryers, water separators and automatic bleed off. Experience: This position requires demonstrated experience in maintaining and repairing plant production equipment. Specific areas of expertise include: 3-5 years of experience in industrial machine maintenance. Knowledge of HMI operation and troubleshooting. Proven track record of production machine maintenance and repair success. History of effectively working in a team environment. Demonstrated success handling multiple high priority projects, in addition to normal responsibilities. Skills and Knowledge: This position requires knowledge in maintaining and repairing plant production equipment. Specific areas of expertise include: Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic (RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience Mechanical Knowledge Chain Drive Live Roller Conveyor systems Chain Conveyors Belt Conveyors Hydraulics pumps and circuits Air compressors Pneumatic circuits valves General Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. NEC 70E electrical Safety. Ability to use Computerized Maintenance Management Systems (CMMS). Strong written and verbal communication skills. Physical Requirements: May require standing for long periods of time, intermittent stooping/bending, pushing/pulling, reaching above shoulder, and repetitively rotating hand/wrist/forearm with or without accommodation. Working Conditions: The role involves working in a warehouse or manufacturing environment. Exposure to noise, dust, and varying temperatures may occur. Personal protective equipment (PPE) required. What we Offer: Competitive Pay + Annual Bonus Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance Employee Stock Match Program! Tuition reimbursement, parental leave, childcare assistance, profit sharing, wellness incentives and MORE! Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer . click apply for full job details
CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician to join our team in Livonia, MI! Key Responsibilities May Include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. This is a 3rd Shift role (Mon-Fri 10pm-6:30am). Once hired, training will begin on 1st shift for the first 60 days before transitioning to 3rd shift Person will be responsible for PMs on equipment including but not limited to: electric forklifts, dock doors, grinder, air compressors, pumps, etc. Livonia site has 13 repair stations that include conveyors, stackers, paint stations and one robot Hands-on experience with mechanical, electrical and electronic troubleshooting as low as 5 VDC to as high as 480 VAC Additional tasks include automation projects, new equipment installations and continuous improvements Schedule: Monday to Friday 10:00pm-6:30am, after initial 60-days training on 1st shift Position Purpose: As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. The Maintenance Technician 1 will adhere to all health and safety policies and directives and maintain a clean safe work area. This position partners with internal and external engineering services and local parts vendors to ensure automated equipment operates at the highest level of efficiencies and will advocate improvement projects as assigned. Major/Key Accountabilities: Responsible for hands on maintenance, troubleshooting and repair of all plant pneumatics, hydraulics, and electric systems including program logic control (PLC) systems controls machine network devices (EthernetIP Network). The Maintenance Technician 2 will diagnose and repair mechanical and electrical failures in all plant manufacturing equipment. This includes, but is not limited to, conveyers, process pallet handling machines, dismantling, painting and stencilling systems. Responsible for hands on maintenance, troubleshooting and repair of all process hand tools, such as pneumatic or electric reciprocating saws and nail guns Performs minor unscheduled maintenance and repair on trucking equipment such as forklifts and yard shuttle trucks The Maintenance Technician 1 is responsible for accurate and timely documentation of performance and processes as required by local and regional leadership. The Maintenance Technician 2 will schedule, execute and properly document work orders within the corporate Computerized Maintenance Management System (CMMS). The Maintenance Technician 1 will accurately complete additional scheduling and repair material documentation and reporting as required. Active participation in machine process and design improvement forums is required. The Maintenance Technician 2 will provide coaching on use and repair of industrial production equipment. Maintenance Technician 1 will participate in health and safety programs including council or committee meetings, OSHA and corporate mandated training, certification and recertification. Basic use of welding/cutting equipment. And any other duties as assigned. Qualifications: Mechanically inclined - Knowledge of and demonstrable ability to use common mechanics tools. Willing to work non-traditional hours including nights, weekends and holidays with on-call availability. Associates Degree or equivalent experience. Ability to stand and walk on concrete floors for up to 12 hours and lift 75 pounds. Ability to read and use mechanical and electrical schematics for troubleshooting. Ability to use an electrical Multimeter for troubleshooting. Understanding of and ability to troubleshoot and repair industrial pneumatic and hydraulic system components, such as pumps, valves, cylinders, motors and solenoids. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Understanding of industrial air compressors and peripheral components such as, dryers, water separators and automatic bleed off. Experience: This position requires demonstrated experience in maintaining and repairing plant production equipment. Specific areas of expertise include: 3-5 years of experience in industrial machine maintenance. Knowledge of HMI operation and troubleshooting. Proven track record of production machine maintenance and repair success. History of effectively working in a team environment. Demonstrated success handling multiple high priority projects, in addition to normal responsibilities. Skills and Knowledge: This position requires knowledge in maintaining and repairing plant production equipment. Specific areas of expertise include: Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic (RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience Mechanical Knowledge Chain Drive Live Roller Conveyor systems Chain Conveyors Belt Conveyors Hydraulics pumps and circuits Air compressors Pneumatic circuits valves General Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. NEC 70E electrical Safety. Ability to use Computerized Maintenance Management Systems (CMMS). Strong written and verbal communication skills. Physical Requirements: May require standing for long periods of time, intermittent stooping/bending, pushing/pulling, reaching above shoulder, and repetitively rotating hand/wrist/forearm with or without accommodation. Working Conditions: The role involves working in a warehouse or manufacturing environment. Exposure to noise, dust, and varying temperatures may occur. Personal protective equipment (PPE) required. What we Offer: Competitive Pay + Annual Bonus Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance Employee Stock Match Program! Tuition reimbursement, parental leave, childcare assistance, profit sharing, wellness incentives and MORE! Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer, and we are committed to developing a diverse workforce in which everyone is treated fairly . click apply for full job details
10/03/2025
Full time
CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll join an international organization big enough to take you anywhere, and small enough to get you there sooner. You'll help change how goods get to market and contribute to global sustainability. You'll be empowered to bring your authentic self to work and be surrounded by diverse and driven professionals. And you can maximize your work-life balance and flexibility through our Hybrid Work Model . Job Description Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Automation Technician to join our team in Livonia, MI! Key Responsibilities May Include: Perform proactive and reactive maintenance activities with a multi-skilled approach, ensuring strict adherence to health and safety protocols at all times. Support the site's reliability initiatives by identifying failure modes, conducting root cause analysis, and implementing corrective actions to improve equipment performance. Assist in scheduling and executing maintenance tasks, ensuring proper documentation of work orders and tasks to maintain accurate maintenance records. Actively seek opportunities to improve maintenance processes and procedures, ensuring compliance with health and safety regulations and contributing to overall plant performance. Conduct risk assessments for all tasks using site-specific or dynamic risk assessment procedures to ensure the safety of both equipment and personnel. Prioritize employee health and safety, product quality, and environmental protection in all maintenance activities, ensuring all efforts contribute to improved plant performance and reliability. This is a 3rd Shift role (Mon-Fri 10pm-6:30am). Once hired, training will begin on 1st shift for the first 60 days before transitioning to 3rd shift Person will be responsible for PMs on equipment including but not limited to: electric forklifts, dock doors, grinder, air compressors, pumps, etc. Livonia site has 13 repair stations that include conveyors, stackers, paint stations and one robot Hands-on experience with mechanical, electrical and electronic troubleshooting as low as 5 VDC to as high as 480 VAC Additional tasks include automation projects, new equipment installations and continuous improvements Schedule: Monday to Friday 10:00pm-6:30am, after initial 60-days training on 1st shift Position Purpose: As a proactive team member, working varying shifts, the Automation Technician I is responsible for performing and managing plant maintenance programs under the direction of the Plant Manager. Maintenance activities must ensure that employee health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. The Maintenance Technician 1 will adhere to all health and safety policies and directives and maintain a clean safe work area. This position partners with internal and external engineering services and local parts vendors to ensure automated equipment operates at the highest level of efficiencies and will advocate improvement projects as assigned. Major/Key Accountabilities: Responsible for hands on maintenance, troubleshooting and repair of all plant pneumatics, hydraulics, and electric systems including program logic control (PLC) systems controls machine network devices (EthernetIP Network). The Maintenance Technician 2 will diagnose and repair mechanical and electrical failures in all plant manufacturing equipment. This includes, but is not limited to, conveyers, process pallet handling machines, dismantling, painting and stencilling systems. Responsible for hands on maintenance, troubleshooting and repair of all process hand tools, such as pneumatic or electric reciprocating saws and nail guns Performs minor unscheduled maintenance and repair on trucking equipment such as forklifts and yard shuttle trucks The Maintenance Technician 1 is responsible for accurate and timely documentation of performance and processes as required by local and regional leadership. The Maintenance Technician 2 will schedule, execute and properly document work orders within the corporate Computerized Maintenance Management System (CMMS). The Maintenance Technician 1 will accurately complete additional scheduling and repair material documentation and reporting as required. Active participation in machine process and design improvement forums is required. The Maintenance Technician 2 will provide coaching on use and repair of industrial production equipment. Maintenance Technician 1 will participate in health and safety programs including council or committee meetings, OSHA and corporate mandated training, certification and recertification. Basic use of welding/cutting equipment. And any other duties as assigned. Qualifications: Mechanically inclined - Knowledge of and demonstrable ability to use common mechanics tools. Willing to work non-traditional hours including nights, weekends and holidays with on-call availability. Associates Degree or equivalent experience. Ability to stand and walk on concrete floors for up to 12 hours and lift 75 pounds. Ability to read and use mechanical and electrical schematics for troubleshooting. Ability to use an electrical Multimeter for troubleshooting. Understanding of and ability to troubleshoot and repair industrial pneumatic and hydraulic system components, such as pumps, valves, cylinders, motors and solenoids. Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors. Understanding of industrial air compressors and peripheral components such as, dryers, water separators and automatic bleed off. Experience: This position requires demonstrated experience in maintaining and repairing plant production equipment. Specific areas of expertise include: 3-5 years of experience in industrial machine maintenance. Knowledge of HMI operation and troubleshooting. Proven track record of production machine maintenance and repair success. History of effectively working in a team environment. Demonstrated success handling multiple high priority projects, in addition to normal responsibilities. Skills and Knowledge: This position requires knowledge in maintaining and repairing plant production equipment. Specific areas of expertise include: Electrical Control panels and power cabinets. 3 phase 480-volt power systems. Rockwell Automation Compact Logic (RSLogix 5000). Ethernet IP networks, EthernetIP on machine devices and VFDs. Yaskawa, Fanuc or Kuka robot experience Mechanical Knowledge Chain Drive Live Roller Conveyor systems Chain Conveyors Belt Conveyors Hydraulics pumps and circuits Air compressors Pneumatic circuits valves General Ability to use and navigate MS office and internet applications. Knowledge of OSHA and Control of Hazardous Energy procedures and regulations. NEC 70E electrical Safety. Ability to use Computerized Maintenance Management Systems (CMMS). Strong written and verbal communication skills. Physical Requirements: May require standing for long periods of time, intermittent stooping/bending, pushing/pulling, reaching above shoulder, and repetitively rotating hand/wrist/forearm with or without accommodation. Working Conditions: The role involves working in a warehouse or manufacturing environment. Exposure to noise, dust, and varying temperatures may occur. Personal protective equipment (PPE) required. What we Offer: Competitive Pay + Annual Bonus Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance Employee Stock Match Program! Tuition reimbursement, parental leave, childcare assistance, profit sharing, wellness incentives and MORE! Remote Type Not Remote Skills to succeed in the role Active Learning, Active Learning, Adaptability, Compressors, Vacuum Pumps and Related Equipment, Computer Literacy, Cross-Functional Work, Curiosity, Data Analysis, Data Literacy, Digital Literacy, Drawings and Schematics, Electric and Electronic Controls, Electric Motors, Emotional Intelligence, Empathy, Fans, Blowers and Supporting Ductwork, Initiative, Lubrication Types and Systems, Machining (Lathes, Milling, and Drill Presses), Mathematic Literacy, Mechanical Literacy, Pipe Systems and Valves, Pneumatic and Hydraulic Systems, Power Transmission Systems, Problem Solving + 1 more We are an Equal Opportunity Employer, and we are committed to developing a diverse workforce in which everyone is treated fairly . click apply for full job details
