Pay : Up to $41.30/hour, based on experience 3rd Shift available, Monday to Friday 03:00 PM - 12:00 AM Shift Differential available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
09/11/2026
Full time
Pay : Up to $41.30/hour, based on experience 3rd Shift available, Monday to Friday 03:00 PM - 12:00 AM Shift Differential available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $32.25 per hour, based on experience $2 Shift Differential 3rd Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems. Document all work performed on Work Order (SAP) using Complaint, Cause, and Correction Format. Learn and develop efficiency in all Maintenance Relates Sysco Computer programs. QUALIFICATIONS Education High school diploma or equivalent. Medium/Heavy Duty truck technical training 2-year school. Experience Either, 1 Year Experience with 2 Year Technical Degree or 3 years experience in Fleet Maintenance and Repair. Certificates, Licenses, and Registrations ASE Certification ' Automotive or Medium/Heavy Duty. Current and Valid Drivers License, CDL-A Preferred. Annual Inspector Certification Knowledge Skills and Abilities. Brake Inspector Certification Knowledge Skills and Abilities. Professional Skills Basic Knowledge and skill of all vehicle systems and Components. Knowledge and skill in the diagnosis and repair of electrical systems on all equipment. Understanding and skill in welding and cutting (gas, electric, MIG, TIG). Working knowledge of Computer-based diagnostic software for OEM component mfg Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical demands to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear, climb, balance, stoop, kneel, crouch, bend and crawl Vision abilities to include Close & Distance vision, color, peripheral vision, depth perception and ability to adjust focus The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
09/11/2026
Full time
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $32.25 per hour, based on experience $2 Shift Differential 3rd Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems. Document all work performed on Work Order (SAP) using Complaint, Cause, and Correction Format. Learn and develop efficiency in all Maintenance Relates Sysco Computer programs. QUALIFICATIONS Education High school diploma or equivalent. Medium/Heavy Duty truck technical training 2-year school. Experience Either, 1 Year Experience with 2 Year Technical Degree or 3 years experience in Fleet Maintenance and Repair. Certificates, Licenses, and Registrations ASE Certification ' Automotive or Medium/Heavy Duty. Current and Valid Drivers License, CDL-A Preferred. Annual Inspector Certification Knowledge Skills and Abilities. Brake Inspector Certification Knowledge Skills and Abilities. Professional Skills Basic Knowledge and skill of all vehicle systems and Components. Knowledge and skill in the diagnosis and repair of electrical systems on all equipment. Understanding and skill in welding and cutting (gas, electric, MIG, TIG). Working knowledge of Computer-based diagnostic software for OEM component mfg Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical demands to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear, climb, balance, stoop, kneel, crouch, bend and crawl Vision abilities to include Close & Distance vision, color, peripheral vision, depth perception and ability to adjust focus The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
SIGN ON BONUS! UPTO $7,500 PAY: $32.00 - $38.00 per hour, based on experience Sunday through Thursday. 8:00 PM - 6:00 AM Shift differential : 2nd shift is $2.00/hr and 3rd shift : $3.00/hr This is a 3rd shift position Annual boot and Tool Allowance Benefits: 401K ,Stock Option Purchase ,Medical, Dental, Eye Insurance and Vacation ,Floating holidays Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
09/11/2026
Full time
SIGN ON BONUS! UPTO $7,500 PAY: $32.00 - $38.00 per hour, based on experience Sunday through Thursday. 8:00 PM - 6:00 AM Shift differential : 2nd shift is $2.00/hr and 3rd shift : $3.00/hr This is a 3rd shift position Annual boot and Tool Allowance Benefits: 401K ,Stock Option Purchase ,Medical, Dental, Eye Insurance and Vacation ,Floating holidays Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Location: 145 Colfax St. Rochester, NY 14606 Shift: Monday- Friday 7:00am- 3:30pm Pay: $29.00 - $36.00/Hour DOE $5000 Sign-on Bonus What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premium - $3.00 (2nd shift), $4.00 (3rd shift) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions: Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer
09/11/2026
Full time
Location: 145 Colfax St. Rochester, NY 14606 Shift: Monday- Friday 7:00am- 3:30pm Pay: $29.00 - $36.00/Hour DOE $5000 Sign-on Bonus What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premium - $3.00 (2nd shift), $4.00 (3rd shift) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions: Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
09/11/2026
Full time
Work Location : 238 W. Commerce St., Dallas, TX, 75208. Shift: Flexible Day Shift. M-F, Optional Saturdays. Shift Premiums - 2nd shift ($2.50), 3rd shift ($3.50), Weekends ($2.50) Position Summary: This diesel technician/mechanic position at Penske is focused on providing top service to our customers who have roadside assistance needs. This position will be responsible for being able to diagnose and repair all types of maintenance issues on the truck in all weather conditions in the safest manner on the side of the road. Qualified candidates will have prior, demonstrated experience in tractor trailer repair and have proficiency in the use of all types of repair tools. Individuals must be willing to drive a Penske Road Assist vehicle that is outfitted with tools and supplies. Preferred Skills: Customer Service & Communication: Experience working directly with customers while demonstrating professionalism, effective communication, and a commitment to delivering a positive service experience. Diverse Mechanical Experience: Experience diagnosing, maintaining, and repairing a variety of commercial vehicles, equipment, or related systems. The ability to adapt to different equipment and service environments is preferred. Mobile Service Experience: Experience working independently in a mobile or field service environment is preferred. Candidates should be comfortable traveling to customer locations to perform maintenance and repairs. Major Responsibilities: Respond timely to road assist calls and repair units by identifying and determining: 1) parts requiring replacement, and 2) warrantable repairs, documented appropriately. Perform diagnostics and non-road assist call repairs that can be dropped quickly, as needed. Restock rapid assist vehicle with tools, parts, tires, or anything else required to perform an effective road assist. Perform maintenance or repairs to road assist vehicle as required. When not out on road calls, assist with designated in-shop repairs as directed by supervisor. Other projects and tasks as assigned by supervisor Qualifications: 10+ years practical experience with tractor trailer maintenance required High school diploma or equivalent required Vocational/Technical or certification preferred Specialized training in the repair and replacement of vehicle components preferred Proficiency in the use of shop tools required Current CDL license with air brake certification required. Applicants must be domiciled in the U.S. and licensed in their state of residence. Basic computer skills preferred for data entry into maintenance systems. Ability to work in non-climate controlled conditions required The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. Regular, predictable, full attendance is an essential function of the job As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background investigation (to include past employment, education, and criminal history) and drug screening are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Penske is an Equal Opportunity Employer.
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Expected pay range: $31.07 to $35.63 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Hiring 2nd or 3rd shift Monday - Friday Operation $1/hour increase for Afternoon Shift, 2:00PM-10:30PM $3/hour increase for Night Shift, 10:00PM-6:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 7 days PTO over your first year, with accruals starting on day one Earn up to 6 days of paid sick and safe leave per year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanic s are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
09/11/2026
Full time
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Expected pay range: $31.07 to $35.63 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Hiring 2nd or 3rd shift Monday - Friday Operation $1/hour increase for Afternoon Shift, 2:00PM-10:30PM $3/hour increase for Night Shift, 10:00PM-6:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 7 days PTO over your first year, with accruals starting on day one Earn up to 6 days of paid sick and safe leave per year 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanic s are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
Pay: Upto $30-$40/HR, negotiable Shift available: 2nd shift 2PM - 10:30PM or 3rd Shift 10:30PM - 6AM Shift Differential: Yes Annual Tool allowance: Yes, $1,200 annually in 2 X $600 payments. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/11/2026
Full time
Pay: Upto $30-$40/HR, negotiable Shift available: 2nd shift 2PM - 10:30PM or 3rd Shift 10:30PM - 6AM Shift Differential: Yes Annual Tool allowance: Yes, $1,200 annually in 2 X $600 payments. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
6310 Byrd Dr, Loveland, CO 80538 What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd shift ($3.00), 3rd shift ($4.00), Weekends ($3.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Shift: Monday-Friday 11:30am-8:00pm Pay: $33.75/hr Opening Date: 6/02/2026 to Closing Date 9/02/2026 Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
09/11/2026
Full time
6310 Byrd Dr, Loveland, CO 80538 What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd shift ($3.00), 3rd shift ($4.00), Weekends ($3.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Shift: Monday-Friday 11:30am-8:00pm Pay: $33.75/hr Opening Date: 6/02/2026 to Closing Date 9/02/2026 Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
6310 Byrd Dr, Loveland, CO 80538 What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd shift ($3.00), 3rd shift ($4.00), Weekends ($3.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Shift: Monday-Friday 11:30am-8:00pm Pay: $33.75/hr Opening Date: 6/02/2026 to Closing Date 9/02/2026 Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
09/11/2026
Full time
6310 Byrd Dr, Loveland, CO 80538 What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. As a Technician I at Penske, you are a respected, experienced lead at your location a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks. Why is this job awesome? For starters, your skills and experience are recognized. You ll get to work on lots of different types of equipment not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Yes, we know you are experienced, and we will rely on your experience and leadership. But we ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc. • Keeping your work area clean and safe • Using Penske s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd shift ($3.00), 3rd shift ($4.00), Weekends ($3.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 6 years of practical experience with truck and tractor-trailer maintenance • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools) • Valid driver s license required, CDL preferred • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to travel as necessary within the district (customers yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Shift: Monday-Friday 11:30am-8:00pm Pay: $33.75/hr Opening Date: 6/02/2026 to Closing Date 9/02/2026 Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Sign-On Bonus for New Hires: UP TO $7,000 Pay: up to $26.97-$41.25 per hour, based on experience 3rd Shift $600.00 Annual Boot and Tool allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/10/2026
Full time
Sign-On Bonus for New Hires: UP TO $7,000 Pay: up to $26.97-$41.25 per hour, based on experience 3rd Shift $600.00 Annual Boot and Tool allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Sign-On Bonus for New Hires: up to $10,000 Pay: up to $22.93-$34.38 per hour, based on experience 3rd Shift available with $3 Shift Differential $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/09/2026
Full time
Sign-On Bonus for New Hires: up to $10,000 Pay: up to $22.93-$34.38 per hour, based on experience 3rd Shift available with $3 Shift Differential $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
SIGN ON BONUS : EARN UPTO $5,000 Pay Rate: $26.00-$32.00 per hour, based on experience. Overtime available Shift Available: Currently a full-time 40-hour night shift, with start times typically between 7:00 PM and 9:00 PM CST Shift Differential: Yes. Employees working the 3rd shift are eligible for an additional $3.00 per hour shift differential. Annual Tool Allowance: Yes, a $500 annual tool allowance is provided. Additional Benefits: Uniforms are provided, and employees receive $150 toward the purchase of safety boots . Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/03/2026
Full time
SIGN ON BONUS : EARN UPTO $5,000 Pay Rate: $26.00-$32.00 per hour, based on experience. Overtime available Shift Available: Currently a full-time 40-hour night shift, with start times typically between 7:00 PM and 9:00 PM CST Shift Differential: Yes. Employees working the 3rd shift are eligible for an additional $3.00 per hour shift differential. Annual Tool Allowance: Yes, a $500 annual tool allowance is provided. Additional Benefits: Uniforms are provided, and employees receive $150 toward the purchase of safety boots . Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
SIGN ON BONUS : EARN UPTO $5,000 Pay Rate: $26.00-$32.00 per hour, based on experience. Overtime available Shift Available: Currently a full-time 40-hour night shift, with start times typically between 7:00 PM and 9:00 PM CST Shift Differential: Yes. Employees working the 3rd shift are eligible for an additional $3.00 per hour shift differential. Annual Tool Allowance: Yes, a $500 annual tool allowance is provided. Additional Benefits: Uniforms are provided, and employees receive $150 toward the purchase of safety boots . Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
09/03/2026
Full time
SIGN ON BONUS : EARN UPTO $5,000 Pay Rate: $26.00-$32.00 per hour, based on experience. Overtime available Shift Available: Currently a full-time 40-hour night shift, with start times typically between 7:00 PM and 9:00 PM CST Shift Differential: Yes. Employees working the 3rd shift are eligible for an additional $3.00 per hour shift differential. Annual Tool Allowance: Yes, a $500 annual tool allowance is provided. Additional Benefits: Uniforms are provided, and employees receive $150 toward the purchase of safety boots . Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
