27 jobs found

At a Glance Company: Prototek Digital Manufacturing Location: Rancho Cordova, CA (On-site) Job Type: Full-Time Pay Range: $40.00 - $50.00/hr (based on experience) Shift: 1st Shift (6:30 AM - 3:00 PM) Overtime: As Needed Experience Level: Senior (5+ years) Work Authorization: U.S. Person status required (ITAR compliance) Why This Role Exists This role supports Prototek's growing demand for complex CNC machining and EDM programs . As a CNC Programmer, you'll play a critical role in developing accurate, efficient programs that drive production success across prototype and short-run manufacturing . This is a high-impact position where your programming decisions directly influence cycle time, quality, and overall shop performance . The Work You'll Be Doing In this role, you will: Develop advanced CNC programs for 3-axis, 5-axis, and lathe machining Create and optimize toolpaths using Fusion 360 Design fixtures and workholding solutions for complex geometries Select tooling and optimize spindle time for efficiency Interpret blueprints and apply GD&T to programming strategies Validate programs and ensure quality before production release Continuously improve existing programs for performance and repeatability Collaborate with machinists, engineers, and project managers on job planning and quoting Machines, Controls & Software Machines: CNC Mills (3-axis, 5-axis), CNC Lathes, EDM equipment Controls: Fanuc, Haas (varies by machine) CAM Software: Fusion 360 (expert level required) CAD Software: SolidWorks Inspection Tools: Standard metrology tools and validation processes Materials You'll Work With Aluminum Stainless Steel Titanium Inconel Plastics What We're Looking For Required: 5+ years of CNC programming and/or machining experience Expert-level proficiency with Fusion 360 Strong SolidWorks modeling experience Deep understanding of tooling strategies, feeds/speeds, and shop math Ability to read prints and apply GD&T in programming decisions Experience working with high-tolerance precision components Preferred (Not Required): Experience with multi-axis machining (5-axis strongly preferred) EDM programming exposure Experience in high-mix, low-volume environments Background in aerospace, medical, or similar industries Why Machinists & Programmers Like Working Here Professionals choose Prototek because: Complex, interesting work - not repetitive production High level of ownership and impact on machining strategy Modern equipment and advanced CAM tools Collaborative environment between programming and machining teams Competitive pay and strong benefits Opportunities for growth into leadership or advanced technical roles Pay, Benefits & Schedule Pay Range: $40.00 - $50.00/hr Schedule: 1st Shift (6:30 AM - 3:00 PM) Overtime: As needed Benefits: Medical, dental, vision insurance Company-paid life and long-term disability insurance 401(k) with match (100% of 3%, 50% of 4-5%) PTO starting at 80 hours + paid holidays Education reimbursement Employee Assistance Program (EAP) Career advancement opportunities Apply Interested CNC Programmers can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Ichor Systems Location: Livermore, CA (On-site) Address: 225 Mountain Vista Pkwy, Livermore, CA 94551 Job Type: Full-Time (Direct Hire Only) Pay Range: $24.09 - $56.73 per hour (based on experience & level) Shift: Day Shift (exact hours to be confirmed) Overtime: Available as needed Experience Level: Mid to Senior (5-10+ years depending on level) Work Authorization: U.S. Person Required (ITAR environment typical) Why This Role Exists This role exists to support high-precision machining demand at Ichor Systems' Livermore facility, including complex multi-axis programs and advanced manufacturing work. In this position, you'll play a key role in producing tight-tolerance components for high-tech industries, with a strong focus on quality, process ownership, and machining excellence. The Work You'll Be Doing In this role, you will: Set up and operate CNC machines including 3-axis, 4-axis, and 5-axis mills and mill-turn equipment Work on complex parts requiring multi-axis machining and tight tolerances Read and interpret blueprints and apply GD&T principles Edit and optimize G-code and machining strategies at the machine Select tooling, set offsets, and verify workholding setups Perform first-article and in-process inspections Troubleshoot machining and setup issues independently Collaborate with programmers and engineers to improve processes (Senior level) Mentor junior machinists and lead setups on complex jobs Machines, Controls & Software You'll work with equipment such as: Machines: Haas, Makino, Hermle, Nakamura (mills, 5-axis, mill-turn) Capabilities: Vertical, Horizontal, 5-Axis Milling, Mill-Turn Controls: Fanuc, Siemens, Haas CAM Software: Mastercam (or similar) Inspection Tools: Micrometers, height gauges, bore gauges, calipers Materials You'll Work With Aluminum Stainless Steel Alloy Steel What We're Looking For Required: 5+ years of CNC machining experience (Level 2-3) 10+ years for senior-level roles (Level 4-5) Strong understanding of CNC machining processes Ability to read blueprints and apply GD&T Experience with multi-axis machining (3+ axis required, 5-axis preferred) Knowledge of G-code and M-code Strong troubleshooting and setup skills Reliable, detail-oriented, and team-focused Preferred (Not Required): Experience with Haas, Makino, Hermle, or Nakamura machines Experience with Fanuc, Siemens, or Haas controls Mastercam or other CAM programming experience Background in aerospace, medical, or high-precision industries Why Machinists Like Working Here Machinists choose Ichor Systems because: Advanced machining environment with true 5-axis and mill-turn work Clean, organized, high-tech production facility Opportunities to work on complex, high-value parts Strong benefits and long-term stability Ability to grow into advanced setup, programming, or leadership roles Backed by a global manufacturing company with steady demand Pay, Benefits & Schedule Pay Range: $24.09 - $56.73/hr (DOE & level) Benefits: Medical, dental, vision coverage 401(k) with company match (immediate vesting) Employee Stock Purchase Plan (ESPP) PTO + paid holidays Tuition reimbursement Disability insurance Schedule: Day Shift (exact hours to be confirmed) Overtime: Available as needed Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later

Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. We are currently looking for a CNC Programmer to join our team in Birmingham, Alabama. PURPOSE OF POSITION Reporting to the Manufacturing Engineering Manager, the CNC Programmer is responsible for writing CNC Programmers, keep up with tool inventory and work with operators for feedback and edits. Task and Responsibilities: SAFETY: Make sure all programs operate in a manner that keeps all employees safe. Comply with all applicable safety policies and regulations, especially in manufacturing areas. QUALITY: Maintains the tool system for stocking, tracking, usage and ordering of hand tools, carbide inserts and other small consumable tooling for the shop floor. Make sure all programs create a quality product that meets all tolerances. Work with QA and production to ensure first article proof run is complete and within tolerances. Assists maintenance staff with installation verification, and commissioning of machinery. ON-TIME DELIVERY: Programs should be issued in a timely manner and in advance of production schedule needs. Maintain the system to control all CNC programs to aid in the manufacture of recurring parts. COST: Research processes and present ideas to result in the most efficient and cost-effective manufacturing methods and selection of appropriate cutting tools. Monitor operations on machines to assure that the proper tooling, cutters, and cutting speeds are being utilized. Reduces machining costs by the implementation of improved tooling, methods, and speeds. PEOPLE: Support employees with CNC program questions and issues, operator assistance and tooling issues. Aid in training of CNC Operators. Liaison with external customers with tooling or other issues. Cooperates and interacts with all levels of personnel with a teamwork approach. Create and maintain machine backups. ENVIRONMENTAL: Adhere to Nortrak's Environmental Procedures, Practices and Policies. Other duties as assigned. JOB REQUIREMENTS: A college degree in manufacturing technology or programming is recommended. In lieu of formal education, a minimum of 5 years of programming experience is required. At least 5 years of CNC machining and/or CNC programming experience in a heavy manufacturing environment is preferred. Strong knowledge of CAD software, preferably in Siemens NX and SurfCAM. Ability to read and interpret technical drawings. Skilled in creating CAD models from drawings and modifying existing model features. Proficiency in reading work orders and blueprints is desirable. Computer literacy, including Microsoft Office applications. Excellent interpersonal, written, and verbal communication skills. Highly responsible, attentive, and detail-oriented. PHYSICAL DEMANDS: Prolonged periods of sitting at a desk and working on a computer. Occasional standing, walking, stooping, kneeling, crouching or climbing. Must be able to lift or handle up to 25 pounds at times. Use hands to finger, handle or feel, and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Occasional travel may be required which includes walking, standing, sitting and driving from short to long periods of time. WORKING LOCATION: Birmingham, Alabama BENEFITS: A supportive, family oriented Nortrak Blue culture We provide an environment where Health and Safety is our priority Career development opportunities and competitive pay progression Competitive medical, dental & vision benefits Company paid life and disability insurance Paid holidays and vacation Retirement plan with matching contributions Tuition Assistance Program Wellness Program Employee Assistance Program Employee Recognition Programs If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak ("Nortrak") is a subsidiary of voestalpine AG ( ) one of Europe's premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine's Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications.

At a Glance Company: MetalTech, Inc. Location: Auburn, Washington 98002 (On-site) Job Type: Full-Time Pay Range: $30 - $40 per hour (DOE) Shift: Day Shift: Mon-Thu 5:00 AM - 3:30 PM (OT Fridays as needed) Swing Shift: Mon-Thu 3:00 PM - 1:30 AM (OT Fridays as needed) Weekend Shift: Fri-Sun 5:00 AM - 5:00 PM (paid 40 hours) Overtime: Available / As needed Experience Level: Mid-Senior (3-5+ years CNC machining/setup experience) Work Authorization: Must be eligible to work in the U.S. (aerospace environment) Published: April 10, 2026 Apply Link: Quick Apply (MetalTech Careers) Why This Role Exists MetalTech is expanding its aerospace and precision manufacturing capacity to support growing demand in aerospace, defense, and commercial space programs. This CNC Mill Set-Up Machinist role is critical to producing high-precision, flight-critical components that require tight tolerances, repeatable setups, and strong machining expertise. The Work You'll Be Doing In this role, you will: Set up and operate 3, 4, and 5-axis CNC vertical and horizontal mills Work from complex aerospace prints and technical drawings Write, edit, and run G-code and M-code programs Set tool offsets, select tooling, and establish workholding setups Perform in-process inspection using precision measurement tools Read and apply GD&T (Geometric Dimensioning & Tolerancing) Troubleshoot machining issues and improve setups for efficiency and quality Collaborate with machinists, programmers, and quality inspectors Support continuous improvement in machining processes Machines, Controls & Software You'll work with equipment such as: Machines: 3-axis, 4-axis, and 5-axis CNC vertical mills Horizontal machining centers Controls: Fanuc Haas Okuma Programming & Editing: G-code / M-code editing at machine level Inspection Tools: Calipers, micrometers, bore gauges, indicators Precision inspection equipment (in-process verification) Materials You'll Work With Aluminum alloys Stainless steel Titanium Aerospace-grade engineered metals What We're Looking ForRequired: 3+ years CNC milling setup experience (aerospace preferred) 5+ years CNC machining/operator experience preferred Strong blueprint reading and GD&T understanding Hands-on experience with CNC setups, tooling, and offsets Experience with 3/4/5-axis CNC milling Ability to inspect parts and maintain quality standards Strong ownership mindset and accountability Preferred: Aerospace machining experience Fanuc, Haas, or Okuma control experience G-code programming and editing experience Multi-axis machining exposure (4/5-axis) Leadership or mentoring mindset Why Machinists Like Working Here Machinists choose MetalTech because: Aerospace-grade, high-precision machining environment Clean, organized, and well-equipped machine shop Modern CNC equipment and tooling systems Stable full-time work with consistent demand Opportunity to work on complex, meaningful aerospace components Growth opportunities into senior setup, programming, or leadership roles Respect for skilled machinists and craftsmanship Pay, Benefits & Schedule Pay Range: $30 - $40/hour (DOE) Benefits: 401(k) with company match (3% + additional matching options) Medical, dental, vision insurance Life insurance Paid time off (PTO) Overtime availability Structured full-time employment (40-50 hrs/week) Schedule: Day Shift: Mon-Thu 5:00 AM - 3:30 PM Swing Shift: Mon-Thu 3:00 PM - 1:30 AM Weekend Shift: Fri-Sun 5:00 AM - 5:00 PM (paid 40 hours) Overtime: Fridays as needed Apply Interested CNC machinists can apply directly: Quick Apply at MetalTech, Inc.

At a Glance Company: Hive Manufacturing (a division of HA Industries) Location: Sterling Heights, MI (On-site) Job Type: Full-Time Pay Range: $33 - $35/hour (based on experience) Shift: Day Shift (5:00 AM - 1:30 PM) Overtime: Available (up to 50 hours/week, optional Saturdays) Experience Level: Mid-Senior (5+ years) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists This role exists to strengthen and lead the lathe department as Hive Manufacturing continues to grow its capabilities and take on more complex work. At Hive Manufacturing, this position plays a key role in producing precision components across a range of industries, with a strong focus on process ownership, programming, and hands-on machining . The Work You'll Be Doing In this role, you will: Program, set up, and run CNC lathes - with a strong focus on hands-on machining Take ownership of jobs from print to completed part (programming + setup + run) Work directly at the machine using Fanuc controls Develop and edit programs using Fusion 360 (modeling + CAM) Select tooling, set offsets, and optimize cutting strategies Run a mix of prototype and production work Hold tight tolerances and ensure part quality Perform first-article and in-process inspection Troubleshoot machining issues and make real-time adjustments Collaborate with engineering and leadership to improve processes and expand capabilities This is not an operator role. This is a 50/50 programming + machining position with real ownership of the work. Machines, Controls & Software You'll primarily work with: Machines: DN Solutions Lynx 2600SY (dual spindle, live tooling, Y-axis), additional CNC turning centers Controls: Fanuc CAM Software: Fusion 360 (primary), GibbsCAM (available), Mastercam (accepted background) Inspection Tools: Micrometers, indicators, bore gauges, and other precision measurement tools Materials You'll Work With Mild & alloy steels (4140, 8620, etc.) Stainless steels Tool steels Aluminum What We're Looking ForRequired: 5+ years of CNC machining experience Strong experience with CNC lathes (programming + setup + operation) Experience with Fanuc controls Ability to read blueprints and understand GD&T Hands-on experience taking parts from print to completion Strong understanding of tooling, offsets, and machining strategy Comfortable working independently and owning the process Preferred (Not Required): Experience with Fusion 360 or other CAM software Exposure to multi-axis or live-tooling lathes Some milling experience (not required) Experience in high-mix or prototype environments Why Machinists Like Working Here Machinists choose Hive Manufacturing because: Clean, organized, and well-run shop Modern equipment and strong investment in technology Backed by HA Industries - stability with room to grow Real opportunity to lead and shape the lathe department Variety of work - from simpler parts to increasingly complex components Team-focused, family-oriented environment Overtime available for those who want it Pay, Benefits & Schedule Pay Range: $33 - $35/hour (DOE) Pay Notes: Top-end pay expected for experienced candidates Benefits: Medical (Blue Cross - multiple plan options) 401(k) (growth plan includes future matching) Paid Time Off (2-4 weeks based on tenure) 8 sick days (rollover) Schedule: Monday - Friday 5:00 AM - 1:30 PM Optional overtime available (up to 50 hours/week) Optional Saturday work Apply Interested machinists can apply directly through hireCNC. Apply now to take ownership of a growing lathe department and work on a wide variety of precision components.

At a Glance Company: Helander Metal Spinning Company Location: Addison, IL, United States (On-site) Job Type: Full-Time Pay Range: $42 - $65/hr (based on experience) Shift: Day Shift (hours to be confirmed) Overtime: Available Experience Level: Senior (8+ years) Work Authorization: ITAR environment (U.S. Person required) Why This Role Exists This role exists to support complex, high-precision manufacturing in a regulated environment. At Helander Metal Spinning Company, this position plays a key role in producing aerospace and high-performance components , with a strong focus on process ownership, quality, and repeatability . The Work You'll Be Doing In this role, you will: Set up and operate CNC mills, lathes, and multi-axis machines Write, edit, and optimize CNC programs Machine tight-tolerance parts ( .005" or better) Interpret blueprints, CAD models, and GD&T Select tooling, fixturing, and machining strategies Perform first-article and in-process inspection Troubleshoot machining, tooling, and programming issues Improve processes, documentation, and repeatability Mentor less experienced machinists and support the shop floor Machines, Controls & Software You'll work with equipment such as: Machines: CNC Mills, Lathes, Multi-Axis Machines (3, 4, 5-Axis) Controls: Fanuc / similar industry-standard controls CAM Software: MasterCAM or Fusion360 (any CAM experience valuable) Inspection Tools: Calipers, micrometers, gauges, first-article inspection tools Materials You'll Work With Titanium Copper Inconel / Nickel-based alloys Other high-performance metals What We're Looking For Required: 8+ years CNC machining experience Strong CNC programming experience (writing, modifying, optimizing) Experience with complex setups and multi-axis machining Strong blueprint reading and GD&T knowledge Ability to independently troubleshoot machining and tooling issues Comfortable working in a hands-on, production-driven role Preferred (Not Required): Experience with 3-, 4-, and 5-axis machining Experience with tooling and fixturing design Background in aerospace, defense, or medical manufacturing Experience in regulated environments (AS9100, ISO, ITAR, NADCAP) Why Machinists Like Working Here Machinists choose Helander Metal Spinning Company because: Work on aerospace and high-performance components Stable, long-standing company Challenging high-mix manufacturing environment Opportunity to own processes and make real impact Strong technical culture with experienced machinists Pay, Benefits & Schedule Pay Range: $42 - $65/hr (DOE) Benefits: Competitive compensation Stable workload in a regulated industry Opportunity to work on complex, high-value parts Schedule: Day Shift (hours to be confirmed) Overtime: Available Apply Interested machinists can apply directly through hireCNC. Apply Now

At a Glance Company: Tool & Die Systems LLC Location: Wixom, MI (On-site) Job Type: Full-Time Pay Range: $56,000 - $85,000 per year (based on experience) Shift: Day Shift (typical shop hours) Overtime: As Needed Experience Level: Senior (5+ years) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists Tool & Die Systems (TDS) is continuing to grow its CNC machining capabilities across production, tooling, and assembly work. This role exists to support a steady flow of new parts and programs - from prototype through production - with a strong focus on ownership, efficiency, and quality. You'll play a key role in taking parts from print to production in a shop that handles everything from machining to kitting and assembly. The Work You'll Be Doing In this role, you will: Program, set up, and run CNC parts from print to completion (cradle-to-grave) Create fixtures, jaws, and workholding solutions for new parts Prove out new programs and transition jobs into production Populate and maintain tooling sheets for all new jobs Troubleshoot machine issues, crashes, or process problems and get jobs back up and running Identify and implement process improvements to reduce cycle times and improve efficiency Work closely with the team to maintain production flow and part quality Machines, Controls & Software You'll work with equipment such as: Machines: Fadal CNC Mills Bridgeport Machines Neway Equipment Brother CNC Machines CAM Software: Fusion 360 BobCAD-CAM Mastercam Inspection Tools: Calipers Micrometers Standard shop inspection tools Materials You'll Work With Aluminum Steel What We're Looking For Required: 5+ years of CNC machining experience Strong programming, setup, and troubleshooting ability Experience taking parts from print to production independently Ability to create fixtures and workholding solutions Comfortable optimizing processes and improving cycle times Ability to read blueprints and work to tight tolerances Preferred (Not Required): Experience with Fadal, Bridgeport, Neway, or Brother machines Experience with Fusion 360, BobCAD, or Mastercam Experience in a job shop or high-mix environment Why Machinists Like Working Here Machinists choose Tool & Die Systems because: You're not just running parts - you own the full process Variety of work (production, tooling, fixtures, assembly support) Small team environment where your input actually matters Opportunity to improve processes and make a real impact Stable workload with a mix of prototype and production work Pay, Benefits & Schedule Pay Range: $56,000 - $85,000 per year (DOE) Benefits: Competitive compensation based on experience Stable, full-time work environment Opportunities to grow into more advanced programming and process roles Schedule: Day Shift (standard shop hours) Overtime: As needed Apply Interested machinists can apply directly through hireCNC. Apply now or save this job to come back later.

At a Glance Company: All-Tech Manufacturing Location: Akron, OH Job Type: Full-Time Pay Range: $27 - $35 per hour (based on experience) Shift: Day Shift (standard weekday schedule) Overtime: Available as needed Experience Level: Senior (5+ years) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists All-Tech Manufacturing is expanding its machining capacity to support a steady pipeline of precision components across aerospace, medical, and industrial programs. This role is critical in taking parts from print to completion - with a strong focus on CNC lathe work, process ownership, and first-piece quality. The Work You'll Be Doing In this role, you will: Program, set up, and run CNC lathes (primary focus) and mills as needed Take parts from print to first-piece completion independently Work heavily on DMG Mori NLX 2500/700 lathes Read and interpret blueprints, tolerances, and specifications Select tooling and optimize machining processes Prove out programs and validate setups Perform first-article and in-process inspection Troubleshoot issues and adjust feeds, speeds, and offsets Machines, Controls & Software You'll work with equipment such as: CNC Lathes (Primary Focus): DMG Mori NLX 2500/700 (2023 & 2025) (primary machine of this position) Mori Seiki NL2500/700 Doosan Puma 200 Doosan Lynx Series (220LC, 300) Doosan Puma GT2100 (bar-fed) Daewoo Puma Series Hitachi Seiki HT20 CNC Mills: Doosan DNM 4500 Doosan DNM 400 Hyundai KF5600 Controls: Fanuc Mitsubishi Programming: CAM programming and conversational controls Inspection Tools: Calipers, micrometers, gauges, and standard inspection equipment Materials You'll Work With Aluminum Stainless Steel Alloy Steel Production metals across multiple industries What We're Looking For Required: 5+ years of CNC machining experience Strong CNC lathe experience (setup + programming) Ability to take parts from print to completion independently Blueprint reading and tolerance interpretation Strong understanding of tooling, offsets, and process optimization Preferred: Experience with DMG Mori NLX or similar high-end turning centers Experience with bar-fed lathe environments CAM programming experience Exposure to high-mix production Why Machinists Like Working Here Machinists choose All-Tech Manufacturing because: Strong lathe-focused shop with modern equipment Newer DMG Mori NLX machines alongside proven platforms High level of independence and ownership Variety of work (prototype production) Stable workload across industries Competitive pay + overtime opportunities Pay, Benefits & Schedule Pay Range: $27 - $35/hr (DOE) Benefits may include: Medical, dental, vision PTO and paid holidays 401(k) options Overtime opportunities Schedule: Day shift, Monday-Friday Overtime: Available as needed Apply Apply now through hireCNC to work on modern lathe equipment and take ownership of your work.

At a Glance Company: Meta Tech Industries Location: Houston, TX (On-site) Job Type: Full-Time Pay Range: $28 - $35 per hour (based on experience) Shift: Day Shift (typical shop hours; confirm specifics) Overtime: Available Experience Level: Intermediate / Senior (5+ years) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists Meta Tech Industries is growing and expanding its machining capacity to support increasing demand across oil & gas, space, and defense industries. This role is critical to producing complex, tight-tolerance components from exotic materials , and is ideal for a machinist who can own the entire process - from programming to setup to finished part. The Work You'll Be Doing In this role, you will: Program, set up, and operate Okuma CNC lathes independently Machine complex precision parts from print/model to finished product Work with live tooling / mill-turn operations (when applicable) Select tooling, set offsets, and establish workholding Perform first-piece and in-process inspection Hold tight tolerances on high-spec components Troubleshoot machining issues and adjust feeds, speeds, and offsets Identify and correct out-of-tolerance conditions Collaborate with production, quality, and leadership to resolve issues Support and mentor less experienced machinists as needed Maintain a clean, organized workspace and perform basic machine maintenance Machines, Controls & Equipment You'll be working with: Machines: Okuma CNC lathes (single turret, live tooling / mill-turn) Controls: Okuma OSP (REQUIRED) Inspection Tools: Calipers, micrometers (ID/OD), depth gauges, indicators, scales Materials You'll Work With Stainless Steel Alloy Steels Exotic Materials (common in oilfield, aerospace, and defense applications) What We're Looking ForRequired: 5+ years of CNC lathe machining experience Strong experience with Okuma OSP controls Ability to program, set up, and run independently Ability to read blueprints and interpret GD&T Strong understanding of tooling, inserts, boring bars, and workholding Experience using precision measuring instruments Solid math skills (geometry, basic algebra for machining calculations) Ability to communicate clearly in English (written and verbal) Adaptability in a fast-paced, production-driven environment Preferred (Not Required): Experience with live tooling / mill-turn lathes Experience machining tight-tolerance parts in aerospace, oil & gas, or defense Why Machinists Like Working Here Machinists choose Meta Tech Industries because: Modern equipment and strong Okuma platform Exposure to complex, high-value parts (not repetitive low-skill work) Opportunity to own your work - programming through production Clean, organized shop with a strong quality culture Stable workload across multiple industries Team environment where experienced machinists are trusted and respected Pay, Benefits & Schedule Pay Range: $28 - $35/hr (DOE) Additional Pay: Overtime, performance bonuses, yearly bonus opportunities Benefits: Medical, dental, and vision insurance Health Savings Account (HSA) 401(k) with company match Life insurance Paid time off Schedule: Day shift (specific hours to be confirmed) Overtime available based on workload Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later

At a Glance Company: Technimark LLC Location: Asheboro (On-site) Job Type: Full-Time Shift: Day Shift Monday-Friday Overtime: As Needed Experience Level: Senior (5+ years) Work Authorization: U.S. Person Why This Role Exists This role exists to support continued growth and demand within Technimark's tooling division, Accuchrome Tool & Mold. In this position, you'll play a key role in producing high-precision injection mold components that support critical manufacturing across healthcare, consumer, and industrial products. This is a hands-on role where programming, setup, and machining expertise directly impact quality, lead times, and overall production success. The Work You'll Be Doing In this role, you will: Program CNC milling machines for new tooling and mold repair work Set up and validate CNC mills after programming Machine high-precision injection mold components Work with hardened tool steels and complex geometries Load/unload parts and manage production runs Hold tight tolerances on critical tooling components Perform in-process inspection and ensure dimensional accuracy Troubleshoot machining issues and optimize performance Support maintenance tasks including machine cleaning and minor repairs Maintain a clean, safe, and organized workspace Machines, Controls & Software You'll work with equipment such as: Machines: 3-axis and 5-axis CNC milling machines Controls: Fanuc, Siemens CAM Software: Cimatron (or similar CAD/CAM platforms) Inspection Tools: Calipers, micrometers, indicators, precision measuring equipment Materials You'll Work With Hardened tool steels Mold-grade steels Precision tooling materials What We're Looking ForRequired: 5+ years of CNC machining and/or mold making experience Strong CNC milling experience (setup + programming) Experience with CAD/CAM software (Cimatron or similar) Ability to machine hardened tool steels Proven ability to hold tight tolerances Experience machining complex 3D surfaces Ability to read blueprints and understand GD&T Strong attention to detail and quality Preferred (Not Required): 5-axis machining experience Experience with injection mold tooling Experience with Fanuc and/or Siemens controls Trade school or formal machining education Why Machinists Like Working Here Machinists choose Technimark LLC because: Stable, growing global manufacturer with diverse industries High-precision, challenging tooling work (not repetitive production only) Modern equipment and advanced manufacturing processes Strong team environment with a "no ego, just outcomes" mindset Clean, organized, and safety-focused facility Opportunities to grow into advanced programming and tooling roles Benefits & Schedule Benefits: Medical, dental, and vision insurance 401(k) with company match Paid time off and holidays Career growth and advancement opportunities Training and development support Schedule: Day Shift Monday-Friday Overtime: As needed Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later

Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI726fa50a5-

At a Glance Company: Kinetic Engine Systems Location: Westfield, MA (On-site) Job Type: Full-Time Pay Range: Competitive - based on experience Shift: Day Shift Overtime: As needed Experience Level: 5+ years (Multi-axis programming experience required) Work Authorization: Must be able to work in the U.S. Apply Link: Apply through hireCNC Why This Role Exists This role exists to support continued demand for ultra-complex aerospace engine components and advanced manufacturing programs. At Kinetic Engine Systems, this position plays a critical role in translating engineering designs into optimized CNC programs that drive precision, efficiency, and repeatability across multi-axis machining operations. The Work You'll Be Doing In this role, you will: Develop CNC programs for complex multi-axis milling operations Select tooling, cutting strategies, and toolpaths using CAD/CAM software Validate programs using simulation software (Vericut) Create tooling lists, setup sheets, and process documentation Analyze and troubleshoot machining issues on the production floor Optimize programs and setup times for continuous improvement Modify existing programs and processes as needed Collaborate with machinists, engineers, and quality teams Ensure compliance with safety standards and procedures Maintain organized work areas using 6S practices Machines, Controls & Software You'll work with advanced aerospace manufacturing equipment such as: Machines: Multi-axis CNC milling centers (including 5-axis) CAM Software: Siemens NX (preferred) Simulation: Vericut Inspection & Documentation Tools: Setup sheets, process documentation, GD&T interpretation Materials You'll Work With Aluminum Titanium Nickel-based superalloys Other aerospace-grade materials These materials align with Kinetic's expertise in ultra-complex engine components. What We're Looking ForRequired High school diploma or GED Strong multi-axis CNC milling programming experience Ability to read blueprints and apply GD&T Knowledge of cutting tools, speeds, feeds, and machining processes Understanding of aerospace manufacturing standards and specifications Experience selecting or designing tooling Strong analytical and problem-solving skills Excellent communication and organizational skills Ability to work independently and meet deadlines Preferred Associate degree or higher in a related field CAD/CAM experience with Siemens NX Processing or manufacturing engineering experience Knowledge of outsource processes (plating, surface treatments, heat treat) Experience in aerospace manufacturing environments Why Machinists Like Working Here Professionals choose Kinetic Engine Systems because of: Advanced aerospace work on highly complex components Modern multi-axis machining environment Collaborative engineering and manufacturing teams Stable demand in the aerospace and defense sector Strong culture focused on safety and continuous improvement Pay, Benefits & Schedule Pay: Competitive - based on experience Benefits Include: Medical, dental, and vision insurance Life and disability coverage Retirement savings plan with company match Paid time off and holidays Wellness resources and Employee Assistance Program Education reimbursement Employee referral program Schedule: Day shift Overtime: As needed Working Conditions & Physical Requirements Environment: Production setting with noise, moving equipment, and metalworking hazards Exposure to cutting fluids, dust, and fumes Travel between Southwick and Westfield facilities may be required Physical Requirements: Ability to lift up to 30 lbs Standing, walking, bending, reaching, and sitting for extended periods Ability to read documents with or without corrective lenses Apply Interested CNC Programmers can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Aveox, Inc. Location: Simi Valley, CA (On-site) Job Type: Full-Time Pay Range: $41.00 - $45.00 per hour (based on experience) Shift: 4/10 Schedule (Monday-Thursday) Overtime: As Needed Experience Level: Senior (5+ Years) Work Authorization: U.S. Citizen or Permanent Resident Required (ITAR) Apply Link: Apply through hireCNC Why This Role Exists This role exists to support continued production demand for mission-critical electromechanical components used across aerospace, defense, and industrial applications. At Aveox, Inc., this position plays a key role in producing precision parts for advanced brushless DC motors, motion control systems, and power conversion technologies - where quality, traceability, and reliability are non-negotiable. The Work You'll Be Doing In this role, you will: Program, set up, and operate multi-axis CNC lathes (2-, 3-, 5-, and 6-axis) Create first-article parts from prints and prototypes Perform live tooling operations and mill-turn work Select tooling, set offsets, and verify workholding Machine print-to-part components to tight tolerances Self-inspect first articles and complex parts using precision measurement tools Ensure full traceability per AS9100 standards Detect and report nonconforming materials or process issues Collaborate with purchasing and vendors for tooling and material needs Perform preventative maintenance on machines Work independently with minimal supervision in a high-precision environment Machines, Controls & Software You'll work with equipment such as: Machines: Multi-axis CNC lathes with live tooling (mill-turn capability) Controls: Fanuc-type controls common in multi-axis turning environments CAM Software: GibbsCAM (required) Inspection Tools: Calipers, micrometers, indicators, and other precision gauges Materials You'll Work With Aluminum Alloy and stainless steels Other aerospace-grade materials used in electromechanical assemblies What We're Looking For Required: 5+ years of CNC programming and machining experience Strong experience with CNC lathes and mill-turn operations Proficiency with GibbsCAM Ability to read blueprints and complex sectional drawings Solid understanding of GD&T Experience performing setups, offsets, and first-article inspections Ability to work independently and manage priorities U.S. Citizen or Permanent Resident (ITAR requirement) Preferred (Not Required): Experience with Doosan machines Experience in aerospace or regulated manufacturing environments Why Machinists Like Working Here Machinists choose Aveox because: Work on advanced, mission-critical technology Clean, professional, engineering-driven environment Stable company serving aerospace, military, and industrial sectors Modern equipment and in-house capabilities Collaborative culture where technical expertise is valued 4-day workweek - every Friday off Pay, Benefits & Schedule Pay Range: $41.00 - $45.00/hr (DOE) Benefits: Competitive compensation with performance-based increases 4/10 schedule (Monday-Thursday) - Fridays off 401(k) Safe Harbor plan with employer match Flexible Spending Accounts (medical & dependent care) Additional voluntary benefits Schedule: Monday-Thursday 4 x 10-hour shifts Overtime: As needed About Aveox, Inc. Aveox designs and manufactures advanced brushless DC motors, motion controllers, and power conversion electronics for mission-critical applications. Founded in 1992, the company supports aerospace, defense, and industrial customers with integrated motion control solutions known for performance, efficiency, and reliability. Key credentials include: Made in the USA ITAR Registered AS9100 Rev D Certified IPC J-STD-001 Certified With extensive in-house engineering, machining, rotor/stator manufacturing, electronics assembly, and testing capabilities, Aveox delivers end-to-end solutions from concept through production. Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later

At a Glance Company: Advance Screw Products Location: St. Francis, WI (On-Site) Job Type: Full-Time Pay Range: $26 - $35 per hour (based on experience) Shift: 1st Shift - 6:00 AM-2:30 PM or 7:00 AM-3:00 PM (Mon-Fri) Overtime: Available (optional Saturday mornings) Experience Level: Mid-Level (2+ years CNC lathe setup experience) Why This Role Exists Advance Screw Products is adding capacity to support consistent demand for precision turned components across multiple industries. This position is essential to maintaining efficient production, reliable quality, and on-time delivery in a fast-paced job shop environment. As a CNC Lathe Setup Machinist, you will produce complex small components on dual-spindle turning centers, ensuring stable processes and high productivity from setup through production. The Work You'll Be Doing In this role, you will: Perform complete setups on CNC dual-spindle lathes Synchronize main and sub-spindle operations Load, verify, and prove out CNC programs at the machine Install tooling, holders, collets, chucks, bar feeders, and part catchers Set tool offsets, wear offsets, and work coordinates Conduct first-article inspections and adjust as needed Troubleshoot machining, tooling, and setup issues Optimize cycle times, feeds, speeds, and tool life Maintain process stability during production Document setup parameters and production data Collaborate with programmers, quality, and production teams Machines, Controls & Equipment You'll work with equipment such as: Machines: Dual-Spindle CNC Lathes (Doosan, Miyano, Ganesh) Controls: Fanuc Production Systems: Bar feeders, part catchers, automation accessories Inspection Tools: Micrometers, calipers, bore gauges, comparators Materials You'll Work With Carbon steels Stainless steel Brass Aluminum Specialty alloys and plastics What We're Looking ForRequired 2+ years of CNC lathe setup experience Ability to independently set up jobs from prints and setup sheets Strong understanding of G-code and CNC controls Proficiency with precision measuring instruments Solid knowledge of cutting tools and inserts Ability to read blueprints and GD&T Reliable, safety-focused, and detail-oriented Preferred (Not Required) Experience with dual-spindle machines Live tooling, Y-axis, or mill-turn experience Bar-fed production experience Familiarity with SPC or process capability concepts High-mix, low-to-medium volume job shop experience Why Machinists Like Working Here Machinists choose Advance Screw Products because: Clean, organized, heated shop environment Family-owned company with long-term stability Specialized work on precision turned parts Mix of modern CNC equipment and proven production machines Realistic schedules with optional overtime Strong benefits and profit-sharing potential Team culture that respects skilled tradespeople Pay, Benefits & Schedule Pay Range: $26 - $35 per hour (DOE) Benefits (after eligibility period) Medical, dental, and vision insurance Company-paid life insurance Retirement plan with profit sharing Paid holidays and vacation Paid personal days Weekly pay Uniform service provided Optional overtime opportunities Schedule 1st Shift: 6:00 AM - 2:30 PM or 7:00 AM - 3:00 PM (Monday-Friday) Optional Saturday overtime: 6:00 AM - 11:00 AM Apply Interested machinists can apply directly through hireCNC. Apply now to join a precision machining team where your setup skills drive production success.

At a Glance Company: AirBoss Location: Auburn Hills (Lake Angelus), Michigan Facility: Plant 2 - Auburn Hills, MI Job Type: Full-Time Pay Range: $30.88 - $37.26 per hour Shift: 1st Shift: 7:00 AM - 3:00 PM 2nd Shift: 3:00 PM - 11:00 PM Overtime: Yes - strong overtime availability Experience Level: Mid to Senior Level Industry: Rubber Injection Mold Manufacturing Work Environment: On-site manufacturing facility Apply Link: Apply directly through hireCNC AirBoss is actively hiring a CNC Programmer / Machinist to support its tooling department in Auburn Hills, MI. This role supports both mold repair work and new mold manufacturing inside a busy rubber injection molding environment. Why This Role Exists This role exists because AirBoss continues to expand tooling department capabilities supporting both ongoing mold repair work and new mold introduction. The tooling team plays a critical role in keeping production running while also supporting new manufacturing initiatives. This is a hands-on position where you will own the full machining process - from programming through setup, operation, inspection, and troubleshooting. The shop is looking for machinists who enjoy problem-solving, varied work, and taking ownership of their jobs rather than simply loading production parts all day. The Work You'll Be Doing In this role, you will: Create and edit CNC programs using Fusion 360 Set up and operate CNC mills and lathes Machine and repair rubber injection molds Perform hands-on troubleshooting and process adjustments Work from customer-supplied CAD models Machine repaired and welded tooling back to specification Perform inspection using calipers, micrometers, and precision measuring tools Utilize new Creaform scanning technology as part of the inspection and repair workflow Support both mold repair work and occasional new mold builds Collaborate closely with tool room leadership and operators This is a high-variety environment where job sizes, complexity, and repair scope can change from day to day. Machines, Controls & Software You'll work with equipment such as: Machines Haas VF8 (3-axis mill) Haas ST20 Lathe Doosan Mill YCM Mills 5-Axis Capability (3+2 work) Manual machining equipment Software Fusion 360 CAM Inspection Equipment Calipers Micrometers Creaform Scanning System Materials & Work Environment You'll primarily work with tooling and mold components used in rubber injection molding production environments. Shop environment includes: Generally clean facility Air filtration systems in place Some heat and smoke due to rubber manufacturing processes Non-climate-controlled environment (typically mid-80s maximum) What We're Looking ForRequired CNC programming and machining experience Experience setting up and operating CNC mills and/or lathes Ability to read blueprints and CAD models Strong understanding of tooling, offsets, and machining processes Comfortable performing inspections using precision measuring tools Reliable work history with strong tenure Team-oriented mindset Preferred Fusion 360 experience Mold manufacturing or mold repair experience Multi-axis machining experience Welding repair machining experience Experience in tooling or tool room environments Why Machinists Like Working Here Machinists choose AirBoss because: Strong overtime availability Stable union environment with structured raises Annual wage increases already planned for the next two years Opportunity to advance quickly based on performance Diverse work - not repetitive production machining Hands-on programming and machining ownership Exposure to new inspection and scanning technology Team-oriented tool room environment Pay, Benefits & SchedulePay Range CNC Programmer: $30.88/hr Senior Tool & Die Level Pay Potential: Up to $37.26/hr Pay Notes Approximately 4.5% annual raises planned over the next two years Significant overtime opportunities available Union pay structure with advancement opportunities Benefits Blue Cross Blue Shield PPO and HSA options Affordable family coverage Additional benefits details provided during interview process Schedule1st Shift Monday-Friday 7:00 AM - 3:00 PM 2nd Shift Monday-Friday 3:00 PM - 11:00 PM Overtime Strong OT availability Early starts and extended shifts common Saturday overtime available Interview Process Brief phone screening Onsite interview with leadership and technical assessment Fast interview feedback is common. Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Hogge Precision Parts Co., Inc. Location: Hartsville Job Type: Full-Time Pay Range: $75,000 - $85,000 per year (based on experience) Shift: Day Shift Overtime: As Needed Experience Level: Mid-Level (3+ years CMM programming or advanced inspection experience) Industry: Precision CNC Machining / Aerospace Manufacturing Relocation Assistance: Available for the right candidate Work Authorization: Authorized to work in the United States Apply Link: Apply directly through hireCNC Why This Role Exists This role exists because Hogge Precision Parts Co., Inc. continues to expand its advanced inspection and quality capabilities within a modern aerospace-focused CNC machining environment. The company recently invested in a new 5-axis CMM system and is looking for a skilled CMM Programmer to help support increasingly complex precision-machined components across aerospace, medical, industrial, and fluid-control industries. This is an opportunity to join a highly respected precision manufacturer with established AS9100 and ISO 9001 systems, advanced machining technology, and a strong technical quality team already in place. The Work You'll Be Doing In this role, you will: Program and operate CMM equipment within a precision machining environment Develop inspection routines and measurement strategies for tight-tolerance machined components Work closely with machinists, quality personnel, and manufacturing leadership to support production and first-article inspections Interpret blueprints, GD&T requirements, and customer specifications Verify dimensional accuracy on aerospace and precision-machined components Support first-article inspection, in-process inspection, and final inspection activities Troubleshoot inspection challenges and improve measurement efficiency Maintain inspection documentation and quality records Assist with APQP, PPAP, and customer quality requirements as needed Support continuous improvement initiatives within the quality department Most of the parts produced at Hogge Precision are small precision components that can fit in your hand, often requiring tolerances as close as 0.0005". Machines, Equipment & Software You'll work in a modern 42,000-square-foot, climate-controlled precision machining facility equipped with advanced manufacturing and inspection technology. Inspection & Quality Equipment includes: 5-axis CMM systems Vision Measurement Systems Optical Comparators Precision inspection tooling Thread gauging systems Software & Systems: Mitutoyo MCosmos APQP / PPAP systems GD&T-based inspection workflows Digital inspection documentation systems Manufacturing equipment onsite includes: 7 & 8-axis CNC turning centers CNC Swiss machining centers Horizontal and vertical machining centers Multi-spindle screw machines Lights-out machining systems Materials & Industries You'll support inspection processes for components used in: Aerospace & Defense Medical Manufacturing Fluid & Air Controls Motion Control Power Transmission Industrial Manufacturing Common materials include: Aluminum Stainless Steel Alloy Steels Copper & Brass What We're Looking ForRequired 3+ years of CMM programming or advanced inspection experience Experience working in a CNC machining or precision manufacturing environment Ability to read blueprints and interpret GD&T Strong understanding of dimensional inspection and measurement processes Experience using precision inspection tools and equipment Strong attention to detail and process discipline Ability to communicate effectively with machinists, quality personnel, and leadership Preferred Experience with Mitutoyo MCosmos software Aerospace machining or AS9100 environment experience Experience supporting PPAP, APQP, or FAI documentation Experience with vision systems or optical inspection equipment Background in Swiss machining or tight-tolerance precision manufacturing Why Machinists & Manufacturing Professionals Like Working Here Manufacturing professionals choose Hogge Precision Parts Co., Inc. because of the company's clean environment, advanced technology, and long-term manufacturing stability. Highlights include: Climate-controlled, organized manufacturing facility Advanced CNC machining and inspection technology Strong AS9100 / ISO 9001 quality systems Modern Swiss machining and multi-axis manufacturing environment Stable aerospace, medical, and industrial manufacturing work Collaborative technical team environment Opportunities to grow within quality and advanced manufacturing operations Pay, Benefits & SchedulePay Range $75,000 - $85,000 per year (DOE) Benefits Health insurance (70-80% company paid) Life insurance Simple IRA retirement plan 3-4 weeks PTO Relocation assistance available for the right candidate Schedule Day Shift Full-time onsite role Overtime as needed based on workload Apply Interested CMM programmers and quality professionals can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Hogge Precision Parts Co., Inc. Location: Hartsville Job Type: Full-Time Pay Range: $115,000 - $140,000 per year (based on experience) Shift: Day Shift Overtime: As Needed Experience Level: Senior Level (5+ years leadership experience in aerospace machining quality) Industry: Precision CNC Machining / Aerospace Manufacturing Relocation Assistance: Available for the right candidate Work Authorization: Authorized to work in the United States Apply Link: Apply directly through hireCNC Why This Role Exists This role exists because a long-tenured Quality Manager is preparing for retirement after helping build and maintain the high-level quality systems that power Hogge Precision's reputation in the aerospace and precision-machining industries. For more than 30 years, Hogge Precision has supplied precision machined components and assemblies to customers across aerospace, medical, fluid control, power transmission, and industrial markets. This position plays a critical leadership role in maintaining AS9100 and ISO 9001 quality standards while helping guide the next phase of operational and quality-system growth. You will step into a well-established quality department with strong technical talent already in place. The company is looking for someone who can bring strategic thinking, leadership, customer communication skills, and deep machining knowledge to the management side of the operation. The Work You'll Be Doing In this role, you will: Lead and manage the company's quality department within a precision CNC machining environment Serve as the management representative during AS9100 and ISO audits Oversee quality planning for new jobs and production launches Develop inspection plans and measurement strategies based on customer drawings and GD&T requirements Define measurement methods, tooling, inspection flow, and quality documentation processes Support APQP, PPAP, FAI, and customer-specific quality requirements Review dimensional requirements and determine appropriate inspection methods and gauging Collaborate closely with machinists, programmers, engineering, and production teams Maintain customer-facing communication regarding quality, corrective actions, and audits Drive continuous improvement initiatives throughout manufacturing and inspection processes Support traceability, documentation control, inspection reporting, and certification management Machines, Equipment & Quality Systems You'll work in a modern 42,000-square-foot, climate-controlled precision machining facility featuring advanced CNC manufacturing and inspection technology. Manufacturing capabilities include: 7 & 8-axis CNC turning centers CNC Swiss machining Horizontal and vertical machining centers Multi-spindle screw machines Lights-out manufacturing systems Quality equipment and systems include: CMM inspection systems Vision measurement systems Optical comparators Micrometers, calipers, thread gauging, and precision inspection tools Mitutoyo MCosmos software environment APQP / PPAP quality planning systems GD&T-based inspection processes First Article Inspection (FAI) documentation Materials & Industries You'll support manufacturing operations producing precision components for industries including: Aerospace & Defense Medical Devices Fluid & Air Controls Power Transmission Motion Control Hydraulics & Pneumatics Industrial Manufacturing Common materials include: Aluminum Stainless Steel Mild & Alloy Steels Copper & Brass Typical tolerances are held as close as 0.0005". What We're Looking ForRequired 5+ years leading quality operations in an aerospace CNC machining environment Strong understanding of AS9100 and ISO 9001 quality systems Experience managing audits and serving as company representative during certification audits Strong machining background and understanding of CNC manufacturing processes Experience with blueprint reading and GD&T interpretation Hands-on experience with precision inspection tools and measurement systems Experience developing inspection plans and quality processes for new production jobs Strong communication and customer-facing skills Leadership experience managing or mentoring quality teams Bachelor's degree or equivalent relevant experience Preferred Experience with CMM programming or vision systems Experience with Mitutoyo MCosmos software Background in APQP / PPAP environments Medical or aerospace manufacturing experience Experience supporting high-mix precision machining operations Why Machinists & Manufacturing Professionals Like Working Here Manufacturing professionals choose Hogge Precision Parts Co., Inc. because of the company's strong reputation, clean facility, and investment in advanced machining technology. Highlights include: Climate-controlled, organized manufacturing environment Modern CNC machining and inspection equipment Established AS9100 / ISO 9001 systems Stable long-term business with more than 30 years in operation Strong technical team already in place Diverse aerospace, medical, and industrial work Leadership team that values quality and continuous improvement Opportunities to help shape the future direction of the quality department Pay, Benefits & SchedulePay Range $115,000 - $140,000 per year (DOE) Benefits Health insurance (70-80% company paid) Life insurance Simple IRA retirement plan 3-4 weeks PTO Relocation assistance available for the right candidate Schedule Day Shift Full-time onsite role Overtime as needed based on business demands Apply Interested manufacturing and quality professionals can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Advance Screw Products Location: St. Francis, WI (On-Site) Job Type: Full-Time Pay Range: $26 - $35 per hour (based on experience) Shift: 1st Shift - 6:00 AM-2:30 PM or 7:00 AM-3:00 PM (Mon-Fri) Overtime: Available (optional Saturday mornings) Experience Level: Mid-Level (2+ years Swiss setup experience preferred) Why This Role Exists Advance Screw Products is expanding capacity to support steady customer demand for high-precision turned components. This role is critical to maintaining efficient production, consistent quality, and reliable delivery across complex Swiss-machined parts. As a CNC Swiss Setup Machinist, you will play a key role in producing small, high-precision components for industries including automotive, medical, industrial, and consumer equipment - with a strong emphasis on craftsmanship and process stability. The Work You'll Be Doing In this role, you will: Perform complete setups on CNC Swiss-type lathes Load, verify, and prove out CNC programs at the machine Install guide bushings, collets, bar stock, and tooling Set tool heights, offsets, and work coordinates Configure bar feeders and support production runs Conduct first-article inspections and make adjustments Monitor part quality and maintain process stability Troubleshoot machining and tooling issues Collaborate with programmers, quality, and production teams Maintain a clean, organized workspace following safety standards Machines, Controls & Equipment You'll work with equipment such as: Machines: Citizen D25 CNC Swiss Lathes Controls: Mitsubishi Production Systems: Bar feeders, automated part handling Inspection Tools: Micrometers, calipers, pin gauges, bore gauges, optical comparators Materials You'll Work With Carbon steels (including free-machining grades) Stainless steel Brass Aluminum Plastics and specialty alloys What We're Looking ForRequired 2+ years of CNC Swiss setup experience Strong understanding of Swiss machining principles and guide bushing operation Ability to independently set up jobs from prints and setup sheets Proficiency with G-code and CNC controls Ability to read blueprints and GD&T Strong knowledge of tooling, inserts, and offsets Reliable, safety-minded, and detail-oriented Preferred (Not Required) Experience with live tooling, cross drilling, and milling operations Experience machining small-diameter, tight-tolerance parts Familiarity with unattended or lights-out machining Knowledge of SPC or process capability concepts Why Machinists Like Working Here Machinists choose Advance Screw Products because: Clean, organized, heated shop environment Family-owned company with long-term stability Specialized work on precision turned components Modern Swiss equipment alongside proven production machines Realistic schedules with optional overtime Strong benefits and profit-sharing potential Team culture that values skilled tradespeople Pay, Benefits & Schedule Pay Range: $26 - $35 per hour (DOE) Benefits (after eligibility period) Medical, dental, and vision insurance Company-paid life insurance Retirement plan with profit sharing Paid holidays and vacation Paid personal days Weekly pay Uniform service provided Optional overtime opportunities Schedule 1st Shift: 6:00 AM - 2:30 PM or 7:00 AM - 3:00 PM (Monday-Friday) Optional Saturday overtime: 6:00 AM - 11:00 AM Apply Interested machinists can apply directly through hireCNC. Apply now to join a precision machining team where your setup skills truly matter.

At a Glance Company: Lone Star Silencer Location: Midlothian, TX (On-Site) Job Type: Full-Time Pay Range: $100,000 - $120,000 per year (DOE) Shift: 1st Shift Monday - Friday (Flexible Schedule) Overtime: As Needed Experience Level: Senior (7+ Years) Work Authorization: U.S. Person Required (Defense Manufacturing Environment) Relocation Assistance: Considered for the right candidate Why This Role Exists Lone Star Silencer is growing and looking for a highly skilled CNC machinist/programmer who is ready to take ownership of shop-floor operations and help shape the future of the business. This role goes beyond simply programming and running machines. The ideal candidate will help drive production, mentor machinists, improve processes, and serve as a trusted decision-maker within a modern defense manufacturing environment. If you're a strong CNC programmer or setup machinist who has been looking for the opportunity to step into leadership, this could be the next step in your career. The Work You'll Be Doing In this role, you will: Program, set up, and optimize CNC mills and lathes Create, edit, and troubleshoot CNC programs using CAM software Support production scheduling and workflow decisions Lead and mentor machinists on the shop floor Improve machining processes, cycle times, and overall efficiency Select tooling, workholding, and machining strategies Perform setup verification and prove-outs for new jobs Ensure operators are properly inspecting and verifying parts Troubleshoot machining, tooling, and quality issues Help establish best practices and continuous improvement initiatives Collaborate directly with ownership on shop growth and operational decisions This is a hands-on leadership role where you'll have significant influence over how the shop operates and scales moving forward. Machines, Controls & Software You'll work with equipment such as: Mills Haas UMC-500 5-Axis Machining Center Haas DN Solutions Mill Doosan DNM 6700 Multiple Haas and Doosan 3-Axis Vertical Mills Lathes Doosan Lynx 2700 Haas ST-20Y Live Tooling and Sub-Spindle Turning Centers Controls Haas Controls Doosan Controls CAM Software Fusion 360 Mastercam Other CAM platforms as needed Inspection Equipment Calipers Micrometers Indicators Standard precision inspection equipment Materials You'll Work With Aluminum Stainless Steel Alloy Steels Other materials commonly used in military and defense applications What We're Looking ForRequired 7+ years of CNC machining experience Strong CNC programming and setup experience Multi-axis milling experience Lathe experience including live tooling Ability to edit and optimize CNC programs Experience using CAM software such as Fusion 360 or Mastercam Strong blueprint reading and GD&T interpretation skills Understanding of production management and workflow optimization Ability to lead others and make sound shop-floor decisions Strong troubleshooting and problem-solving skills U.S. Person status due to defense-related manufacturing requirements Preferred (Not Required) Previous Lead Machinist, Shop Lead, or Supervisor experience 5-axis machining experience Defense or military manufacturing experience Experience helping build processes and shop procedures Experience mentoring and training machinists Why Machinists Like Working Here Machinists choose Lone Star Silencer because: Modern Haas and Doosan equipment Fully climate-controlled facility Stable and growing defense manufacturing business Low-drama, team-oriented environment Large percentage of repeat production work Opportunity to make a real impact on shop operations Leadership team that values skilled tradespeople Clear path for career growth and increased responsibility Ability to help shape the future direction of the company This isn't a large corporate manufacturing facility. It's an opportunity to join a growing team where your expertise will directly influence production, quality, and long-term success. Pay, Benefits & SchedulePay Range $100,000 - $120,000 per year (DOE) Benefits Medical Insurance (Company Pays Approximately 80%) Dental Insurance Vision Insurance 401(k) with Company Match Two Weeks PTO Paid Major Holidays Christmas Shutdown Period Relocation Assistance Considered Schedule Monday - Friday 1st Shift Flexible Hours Overtime as Needed Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later.

At a Glance Company: Staging Dimensions Location: New Castle, Delaware (On-Site) Job Type: Full-Time Pay Range: $27.00 - $44.00 per hour (based on experience) Shift: Day Shift Monday-Friday 7:00 AM - 3:30 PM Overtime: Occasional overtime and weekend work as needed Experience Level: Mid to Senior Level (3+ years CNC programming experience required) Benefits Eligibility: First of the month following 60 days of full-time employment Why This Role Exists Staging Dimensions is expanding its CNC manufacturing capabilities and is seeking an experienced CNC Programmer / Fabricator to lead programming and machining operations within its 60,000-square-foot facility in New Castle, Delaware. This position plays a critical role in producing custom steel, aluminum, wood, and display-related components used in high-profile staging, exhibit, and fabrication projects. You'll have significant ownership over CNC programming, machine setup, process improvement, scheduling, and operator support. The Work You'll Be Doing In this role, you will: Program, set up, and operate CNC vertical machining centers Create and modify programs using Mastercam Edit and troubleshoot G-code and M-code at the machine Set up and break down machining centers for production runs Schedule preventative maintenance and machine cleaning activities Troubleshoot machine, tooling, and production issues Create production schedules for machining centers Train and support CNC machine operators Fabricate custom components from steel, aluminum, wood, and other materials Work with designers, engineering, and management teams to achieve customer requirements Read and interpret blueprints, shop drawings, and fabrication plans Operate additional shop equipment including manual mills, press brakes, saws, drills, and lathes Maintain quality standards while meeting production deadlines Support quick-turn custom manufacturing projects in a fast-paced environment Machines, Controls & Software You'll work with equipment and software such as: CNC Machines Haas VF-10 Vertical Machining Center Haas VF-4 Vertical Machining Center Haas VF-3 Vertical Machining Center Fadal Vertical Machining Centers Software Mastercam AutoCAD SolidWorks Additional Equipment Manual mills Press brakes Saws Manual lathes Drill presses Materials You'll Work With Aluminum Steel Wood Plexiglas Laminates and veneers (helpful experience) Custom fabrication materials used in staging and display manufacturing What We're Looking ForRequired 3+ years of CNC programming experience with vertical mills Strong Mastercam programming experience Experience setting up and operating CNC vertical machining centers Ability to edit and troubleshoot G-code and M-code Knowledge of AutoCAD and SolidWorks Experience with machine setup, tooling, offsets, and production troubleshooting Ability to read blueprints and fabrication drawings Experience working with steel and aluminum Strong fabrication and shop-floor skills Reliable transportation Ability to lift up to 75 pounds Preferred Experience with Haas and Fadal machining centers Experience working with wood and Plexiglas Experience with laminates and veneers Forklift certification Leadership or operator training experience Why Machinists Like Working Here Machinists choose Staging Dimensions because: Diverse work with custom fabrication projects rather than repetitive production work Opportunity to own programming, setup, and process decisions Large 60,000-square-foot manufacturing facility with a 40,000-square-foot shop floor Mix of CNC machining and hands-on fabrication work Stable Monday-Friday day shift schedule Competitive pay based on experience Opportunity to lead and mentor machine operators Collaborative environment working closely with designers and production teams Pay, Benefits & SchedulePay $27.00 - $44.00 per hour (DOE) Schedule Monday - Friday 7:00 AM - 3:30 PM Occasional overtime and weekend work as needed Benefits Medical Insurance Dental Insurance Vision Insurance Life Insurance Simple IRA with employer match Aflac supplemental coverage Paid Time Off 1 week PTO after 6 months 2 weeks PTO after 1 year Benefits begin the first of the month following 60 days of full-time employment Additional Details Bi-weekly payroll Full-time permanent position Leadership growth opportunity within the CNC department Apply Interested CNC Programmers and Fabricators can apply directly through hireCNC. Apply Now or Save This Job to come back later.