Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
12/07/2025
Full time
Date Posted: 2025-10-07 Country: United States of America Location: MA114: Andover MA 354 Lowell Suffolk 354 Lowell Street Suffolk, Andover, MA, 01810 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Production Test Engineering Section Manager will be directly responsible for managing a functional team of engineers who support production testing in the Andover factory. What You Will Do Prioritizing tasks to meet the customer's needs, Coordinating resources Managing team staffing levels and interfacing with strategic make center personnel and leaders Training, coaching, mentoring, employee performance development Responsible for technical quality of engineering tasks, product compliance and providing critical oversight to team of engineers including staffing and approval of timecards Develop sustaining solutions to technical problems, troubleshoot manufacturing systems and lead root cause and corrective action Participate or lead functional or factory improvement projects Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment. Qualifications You Must Have Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and minimum 10 years of relevant experience. 1 year of experience in leading people/teams The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience in production manufacturing test Experience leading a team of engineers Experience with lean principles in a manufacturing environment Preferred majors: Electrical Engineering, Computer Science/Engineering Technology Current DOD Secret Security Clearance Experience applying technical principles in the manufacturing life cycle Experience with Quality Systems and their application Earned Value Systems Budget Management Shop Floor Management Experience with MRP systems (ex. SAP) Experience with proposal development Experience with Estimates at Complete (EAC) development and management Skilled in risk identification and risk management Strong engineering aptitude and analytical skills Technical problem solving Excellent interpersonal and communication skills Verbal and written technical communication Customer and company oriented and driven to meet or exceed expectations Ability to maintain a professional attitude to serve as an example to the team and colleagues Ability to work cohesively in a fast paced environment Self-starter and able to manage personal and team workload Passion for functional leadership and be able to demonstrate a high level of maturity and emotional intelligence What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance is not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 124,000 USD - 250,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Middle River Aerostructure Systems
Baltimore, Maryland
Position Title: Composite Technician (Entry-Level, $20/hr + Hiring Bonus) Location: Baltimore, MD, US, 21220 Company Name: STENA Description: Please Note: Upon completion of your application and confirmation that you meet the listed qualifications, you will receive a required assessment (TestGorilla) via email within 2 business days. This assessment is a critical part of our selection process. Be sure to check your spam or junk folder if you do not see the email in your inbox. Who YOU are and what YOU can become Are you someone who thrives on precision, craftsmanship, and the challenge of working with advanced materials? If so, this role may be your perfect fit. We're looking for a meticulous and mechanically minded individual who enjoys fabricating and repairing complex composite and metal bonded assemblies. You'll be working with intricate components that demand exact alignment in fixtures that may lack standard stops or locators, and where tight tolerances are critical to success. If you take pride in building things that truly fit together and enjoy the satisfaction of clean, accurate work, this is the kind of challenge you'll love. Who WE are and where WE are going: At ST Engineering MRAS, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: To fabricate and repair complex composite and metal bonded assemblies. Includes the teardown of assemblies post cure and the cleaning of bond tools. Bonded assemblies are complex due to the quantity of interrelated components requiring precision alignment in fixtures not completely equipped with stops, locators, etc., and/or close tolerances critical to accurate assembly. To perform this function in accordance with the following duties: • Uses works from engineering and tool design drawings, specifications, sketches and/or verbal information to fabricate and repair composite and metal bonded assemblies • Studies information, tools and details to plan fabrication of assignment • Prepares materials, molds, patterns, adhesives, etc., for molding and bonding processes • Makes and uses templates to cut materials to desired shape • Lays-out resin impregnated sheets against molds where complex contours and angles are usually encountered in inaccessible areas, requiring manipulative skill to fit and smooth laminates to eliminate wrinkles and remove air pockets • Works laminate layers to desired smoothness to eliminate voids, delamination, crazing, blistering and wrinkles • Locates all parts and assemblies which involves precision alignment and location of components to close tolerances and fitting and adjusting assemblies and components in and out of fixtures to meet specifications • Determines location, position, accuracy of fit, conformity to contour, etc., of bonded assemblies by comparison with drawings and sketches • Fabricates initial bonded assemblies, proving tools and component parts used in their fabrication, ascertains location, fit, clearance, etc., of components and usability and practicability of tools • Determines method and sequence of work operations for use in assembling subsequent units • Removes parts post-cure from associated molds and tools • Cleans molds and / or tools as part of teardown process • Repairs any damage to composite and metal bonded assemblies where the repair requires the utilization of uncured or prefabricated repair details on areas requiring intricate precision layouts • Grinds, shaves, countersinks and inserts as specified in MPP's • Adheres to company safety procedures and regulations • Operation of cranes, fork trucks, people lifts, upenders, lift tables, and rotating devices is required • Duties involve working at heights, working around cured and pre-cured graphite, and use of lasers, hand and power tools • Participates and actively engages in Collaborative Work Group to meet business goals What YOU must bring to Succeed: • Must be 18 years of age or older. • HS diploma / GED equivalent. • Broad shop trade knowledge of bonding procedures. • Ability to read and interpret complex assembly drawings, lofts, and specifications, use shop mathematics and work with all types of precision measuring instruments. AT ST Engineering MRAS, we offer great rewards , competitive pay , career advancement and growth opportunities . Salary for this role: $20.00 per hour. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering MRAS offers these incentives for hourly roles: • Competitive Healthcare Benefits Package • 401k Savings Plan • Annual Pay Increases and COLA pay • Shift Differential Pay for off shift schedules • Overtime Opportunities • Paid-Time Off/Vacation • Educational Assistance Reimbursement • Health & Safety Personal Protective Program • Free Onsite Gym with weekly fitness classes • On-the-Job Training Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at , or by email at . PM19 Nearest Major Market: Baltimore PI9747cbb9cc5e-5780
12/07/2025
Full time
Position Title: Composite Technician (Entry-Level, $20/hr + Hiring Bonus) Location: Baltimore, MD, US, 21220 Company Name: STENA Description: Please Note: Upon completion of your application and confirmation that you meet the listed qualifications, you will receive a required assessment (TestGorilla) via email within 2 business days. This assessment is a critical part of our selection process. Be sure to check your spam or junk folder if you do not see the email in your inbox. Who YOU are and what YOU can become Are you someone who thrives on precision, craftsmanship, and the challenge of working with advanced materials? If so, this role may be your perfect fit. We're looking for a meticulous and mechanically minded individual who enjoys fabricating and repairing complex composite and metal bonded assemblies. You'll be working with intricate components that demand exact alignment in fixtures that may lack standard stops or locators, and where tight tolerances are critical to success. If you take pride in building things that truly fit together and enjoy the satisfaction of clean, accurate work, this is the kind of challenge you'll love. Who WE are and where WE are going: At ST Engineering MRAS, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: To fabricate and repair complex composite and metal bonded assemblies. Includes the teardown of assemblies post cure and the cleaning of bond tools. Bonded assemblies are complex due to the quantity of interrelated components requiring precision alignment in fixtures not completely equipped with stops, locators, etc., and/or close tolerances critical to accurate assembly. To perform this function in accordance with the following duties: • Uses works from engineering and tool design drawings, specifications, sketches and/or verbal information to fabricate and repair composite and metal bonded assemblies • Studies information, tools and details to plan fabrication of assignment • Prepares materials, molds, patterns, adhesives, etc., for molding and bonding processes • Makes and uses templates to cut materials to desired shape • Lays-out resin impregnated sheets against molds where complex contours and angles are usually encountered in inaccessible areas, requiring manipulative skill to fit and smooth laminates to eliminate wrinkles and remove air pockets • Works laminate layers to desired smoothness to eliminate voids, delamination, crazing, blistering and wrinkles • Locates all parts and assemblies which involves precision alignment and location of components to close tolerances and fitting and adjusting assemblies and components in and out of fixtures to meet specifications • Determines location, position, accuracy of fit, conformity to contour, etc., of bonded assemblies by comparison with drawings and sketches • Fabricates initial bonded assemblies, proving tools and component parts used in their fabrication, ascertains location, fit, clearance, etc., of components and usability and practicability of tools • Determines method and sequence of work operations for use in assembling subsequent units • Removes parts post-cure from associated molds and tools • Cleans molds and / or tools as part of teardown process • Repairs any damage to composite and metal bonded assemblies where the repair requires the utilization of uncured or prefabricated repair details on areas requiring intricate precision layouts • Grinds, shaves, countersinks and inserts as specified in MPP's • Adheres to company safety procedures and regulations • Operation of cranes, fork trucks, people lifts, upenders, lift tables, and rotating devices is required • Duties involve working at heights, working around cured and pre-cured graphite, and use of lasers, hand and power tools • Participates and actively engages in Collaborative Work Group to meet business goals What YOU must bring to Succeed: • Must be 18 years of age or older. • HS diploma / GED equivalent. • Broad shop trade knowledge of bonding procedures. • Ability to read and interpret complex assembly drawings, lofts, and specifications, use shop mathematics and work with all types of precision measuring instruments. AT ST Engineering MRAS, we offer great rewards , competitive pay , career advancement and growth opportunities . Salary for this role: $20.00 per hour. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering MRAS offers these incentives for hourly roles: • Competitive Healthcare Benefits Package • 401k Savings Plan • Annual Pay Increases and COLA pay • Shift Differential Pay for off shift schedules • Overtime Opportunities • Paid-Time Off/Vacation • Educational Assistance Reimbursement • Health & Safety Personal Protective Program • Free Onsite Gym with weekly fitness classes • On-the-Job Training Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at , or by email at . PM19 Nearest Major Market: Baltimore PI9747cbb9cc5e-5780
Job Title: Swiss/Turn-Mill CNC ProgrammerCompany: Custom Control Sensors, LLCLocation: Phoenix, AZ. Employee Type: Full Time Non-Exempt Industry: ManufacturingJob Type: Machine Shop Education: High School Diploma or GEDExperience: Technical certificate from trade school/community colleges on CNC machining And/or programming. Five or more years experience of Swiss and /or Turn- Mill programming using leading CAD/Cam system such as Part-Maker, FeatureCam, etc. Able to set-up and produce First Piece on Swiss and/or Turn- Mill lathesCompany Overview: Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001 and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our companys success.Job Description: The Swiss/Turn-Mill CNC Programmer will manage the CNC-program creation process for machine shop with expanding CNC Swiss lathes, CNC Turn-mill lathes, CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills Key Responsibilities:Interprets drawings, create new solid models (where necessary) to generate CNC programs for Swiss lathes and/or multi-axis Turn-Mill (double-turret, double-spindle) machinesCNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Using CAD/CAM system ( preferably Part-Maker, FeatureCam, etc.)Include proper methodology, tooling, cutting speeds and feeds in order to generate quality parts in accordance to product specifications.Set-up to produce First Piece on the Swiss, Turn-Mill machines,CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Run jobs when required. Studies and interprets drawings, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiency.Creates set-up sheets (tool list, x-y-z home positions) and communicate with set-up machinists of the tooling requirements, fixtures, etc.Monitors and verifies the accuracy of each jobs initial set-up and final outcome.Revises, update, and maintain all programs and documents based on engineering changes or per process improvement projects dictate.Work with machine shop supervisor/manager on process improvements and cycle time reductions including testing of new cutting tools and new processes to balance main/sub cycle time.Communicates with set-up machinists and/or Machine Shop Supervisor/Manager regarding tooling/fixtures/material requirements for upcoming and/or existing jobs on the floor.Provides shop floor assistance with inspection methods, training on machines, machine alarms, and program issues.Communicates with the Quality Engineer to develop inspection methods, First Piece Inspections (FPIs), and In-process inspection during production run.Skills and Requirements:Applicant must be ITAR compliant.5+ years of experience programming Swiss CNC Machines and/or Turn-Mill lathes (Tsugami, Star, and double-spindle + double-turret CNC machines) preferred andCNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Deep understanding of machining fundamentals or formula correlation of machining parameters (i.e. SFM, RPM, IPR, IPT, etc.) on cutting tool, work-piece materials, etc.Knowledge of newer Fanuc controls (18i, 31i), including Tsugami machines (S-series, B0-series,) multi-axis turn-mill centers and ability to learn and adapt to ever changing technologyKnowledge of measuring equipment and the application of such instruments, including but not limited to calipers, micrometers, depth gauges, indicators, comparators.Deep understanding of mechanical drawings and specifications and ability to interpret geometric tolerances and dimensions call-outs on drawings.Detailed knowledge of programming segments and corresponding operations.Working knowledge of various tool holders, cutting tools, boring bars and inserts used on various machinesKnowledge and understanding of AS9100 quality system.Proficient level of Microsoft Office Suite (Microsoft Word, Outlook, and Excel, etc).Familiar or working knowledge of Enterprise Resource Planning (ERP) software. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, to frequently walk, bend, stoop, reach, turn, twist, push, pull and to occasionally crouch or kneel. Talk or hear, and to move within the areas of the facilities and parking lots. The employee must also occasionally lift and/or carry objects or loads under 30 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. An annual eye exam may be required. EEO M/F/D/VCustom Control Sensors, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Compensation details: 30-38 Hourly Wage PIfa1287e4c1c2-4132
12/07/2025
Full time
Job Title: Swiss/Turn-Mill CNC ProgrammerCompany: Custom Control Sensors, LLCLocation: Phoenix, AZ. Employee Type: Full Time Non-Exempt Industry: ManufacturingJob Type: Machine Shop Education: High School Diploma or GEDExperience: Technical certificate from trade school/community colleges on CNC machining And/or programming. Five or more years experience of Swiss and /or Turn- Mill programming using leading CAD/Cam system such as Part-Maker, FeatureCam, etc. Able to set-up and produce First Piece on Swiss and/or Turn- Mill lathesCompany Overview: Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001 and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our companys success.Job Description: The Swiss/Turn-Mill CNC Programmer will manage the CNC-program creation process for machine shop with expanding CNC Swiss lathes, CNC Turn-mill lathes, CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills Key Responsibilities:Interprets drawings, create new solid models (where necessary) to generate CNC programs for Swiss lathes and/or multi-axis Turn-Mill (double-turret, double-spindle) machinesCNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Using CAD/CAM system ( preferably Part-Maker, FeatureCam, etc.)Include proper methodology, tooling, cutting speeds and feeds in order to generate quality parts in accordance to product specifications.Set-up to produce First Piece on the Swiss, Turn-Mill machines,CNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Run jobs when required. Studies and interprets drawings, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiency.Creates set-up sheets (tool list, x-y-z home positions) and communicate with set-up machinists of the tooling requirements, fixtures, etc.Monitors and verifies the accuracy of each jobs initial set-up and final outcome.Revises, update, and maintain all programs and documents based on engineering changes or per process improvement projects dictate.Work with machine shop supervisor/manager on process improvements and cycle time reductions including testing of new cutting tools and new processes to balance main/sub cycle time.Communicates with set-up machinists and/or Machine Shop Supervisor/Manager regarding tooling/fixtures/material requirements for upcoming and/or existing jobs on the floor.Provides shop floor assistance with inspection methods, training on machines, machine alarms, and program issues.Communicates with the Quality Engineer to develop inspection methods, First Piece Inspections (FPIs), and In-process inspection during production run.Skills and Requirements:Applicant must be ITAR compliant.5+ years of experience programming Swiss CNC Machines and/or Turn-Mill lathes (Tsugami, Star, and double-spindle + double-turret CNC machines) preferred andCNC 3 axis lathes, CNC 2 axis lathes and CNC 3 axis mills.Deep understanding of machining fundamentals or formula correlation of machining parameters (i.e. SFM, RPM, IPR, IPT, etc.) on cutting tool, work-piece materials, etc.Knowledge of newer Fanuc controls (18i, 31i), including Tsugami machines (S-series, B0-series,) multi-axis turn-mill centers and ability to learn and adapt to ever changing technologyKnowledge of measuring equipment and the application of such instruments, including but not limited to calipers, micrometers, depth gauges, indicators, comparators.Deep understanding of mechanical drawings and specifications and ability to interpret geometric tolerances and dimensions call-outs on drawings.Detailed knowledge of programming segments and corresponding operations.Working knowledge of various tool holders, cutting tools, boring bars and inserts used on various machinesKnowledge and understanding of AS9100 quality system.Proficient level of Microsoft Office Suite (Microsoft Word, Outlook, and Excel, etc).Familiar or working knowledge of Enterprise Resource Planning (ERP) software. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand, use hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, to frequently walk, bend, stoop, reach, turn, twist, push, pull and to occasionally crouch or kneel. Talk or hear, and to move within the areas of the facilities and parking lots. The employee must also occasionally lift and/or carry objects or loads under 30 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. An annual eye exam may be required. EEO M/F/D/VCustom Control Sensors, LLC. is an Equal Opportunity/Affirmative Action employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Compensation details: 30-38 Hourly Wage PIfa1287e4c1c2-4132
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. GENERAL PURPOSE: We are seeking a skilled and detail-oriented Maintenance Technician to support our manufacturing operations by ensuring the efficient and safe operation of machinery and equipment. This role is responsible for installing, repairing, and maintaining mechanical, electrical, hydraulic, conveyor, and pneumatic systems, as well as performing preventative and emergency maintenance. Key responsibilities include troubleshooting complex technical issues, conducting routine inspections, and assisting Management with process improvements and equipment upgrades. The position requires strong problem-solving skills, technical knowledge across multiple systems, the ability to interpret technical documents and schematics, and physical dexterity to perform hands-on tasks in a dynamic manufacturing environment. ESSENTIAL JOB FUNCTIONS: Perform routine inspections, preventive maintenance, and repairs on manufacturing machinery and equipment to ensure optimal performance and minimize downtime. Diagnose and troubleshoot mechanical, electrical, and pneumatic issues; repair or replace defective components. Install and calibrate new equipment, ensuring proper functionality and compliance with company standards. Maintain a clean, organized, and hazard-free work environment while adhering to all safety regulations and policies. Inspect facilities and equipment to meet health and safety standards. Maintain accurate records of maintenance activities, equipment configurations, and engineering changes. Collaborate with engineers and production teams to resolve technical issues impacting quality or output. Conduct routine testing and inspections to verify system efficiency and reliability. Interpret mechanical, electrical, and pneumatic schematics and blueprints. Provide technical support during equipment implementation, process upgrades, and continuous improvement initiatives. Train production staff on proper equipment use and basic troubleshooting techniques. Build custom parts as required; operate scissors lifts and forklifts. Monitor inventory of technical parts, tools, and supplies Respond to on-call duties and perform other tasks as assigned. SAFE WORK REQUIREMENTS: PPE: Safety Glasses, Ear Plugs or Earmuffs, Safety Shoes, Gloves when required , Hard Hats, and any other PPE Required based on the job or task. Compliance with Smurfit Westrock employment policies, handbook, and workplace safety policies, rules, and procedures. Submission of Safety Concerns and Safety Work Order / Incident Reporting and Learning / Basic understanding of the Safety Excellence System Follow the site management (General Manager, Plant Manager, Department Manager ,Shift Supervisor ) assignments for completing tasks and managing programs as part of the Safety Excellence System. Must follow Training Matix assigned in the Learning and Development System. Training could be assigned Annually, Quarterly or at the time of a new process / procedure. Must have a clear understanding of the STOP Work Process - Employees have the right to STOP the work at any time to gain a better understanding of the process or to ensure safety standards are met. QUALIFICATIONS: Must have secondary education, Trade schools, e.g., Industrial Maintenance Tech certification, Mechatronics, relevant associate degree, or 5 years of experience in lieu of degree/certificate Minimum 3 years' experience in Industrial Maintenance or Manufacturing Maintenance. Must be able to properly use rulers, calipers, micrometers, and other measuring instruments. Must have a working knowledge of AC/DC motors. Must be trained in basic electric and mechanical safety. Must have basic computer experience. e.g., CMMS - Computerized Maintenance Management System, Microsoft Office Must be knowledgeable in the safe use of hand and small power tools. Must pass color vision and color hue tests. Must be able to work on-call as needed. Must have acute troubleshooting skills. Must be able to maintain good attendance. Must be willing to work overtime as needed. Must be able to perform all essential functions of this job with or without reasonable accommodation. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
12/07/2025
Full time
Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. GENERAL PURPOSE: We are seeking a skilled and detail-oriented Maintenance Technician to support our manufacturing operations by ensuring the efficient and safe operation of machinery and equipment. This role is responsible for installing, repairing, and maintaining mechanical, electrical, hydraulic, conveyor, and pneumatic systems, as well as performing preventative and emergency maintenance. Key responsibilities include troubleshooting complex technical issues, conducting routine inspections, and assisting Management with process improvements and equipment upgrades. The position requires strong problem-solving skills, technical knowledge across multiple systems, the ability to interpret technical documents and schematics, and physical dexterity to perform hands-on tasks in a dynamic manufacturing environment. ESSENTIAL JOB FUNCTIONS: Perform routine inspections, preventive maintenance, and repairs on manufacturing machinery and equipment to ensure optimal performance and minimize downtime. Diagnose and troubleshoot mechanical, electrical, and pneumatic issues; repair or replace defective components. Install and calibrate new equipment, ensuring proper functionality and compliance with company standards. Maintain a clean, organized, and hazard-free work environment while adhering to all safety regulations and policies. Inspect facilities and equipment to meet health and safety standards. Maintain accurate records of maintenance activities, equipment configurations, and engineering changes. Collaborate with engineers and production teams to resolve technical issues impacting quality or output. Conduct routine testing and inspections to verify system efficiency and reliability. Interpret mechanical, electrical, and pneumatic schematics and blueprints. Provide technical support during equipment implementation, process upgrades, and continuous improvement initiatives. Train production staff on proper equipment use and basic troubleshooting techniques. Build custom parts as required; operate scissors lifts and forklifts. Monitor inventory of technical parts, tools, and supplies Respond to on-call duties and perform other tasks as assigned. SAFE WORK REQUIREMENTS: PPE: Safety Glasses, Ear Plugs or Earmuffs, Safety Shoes, Gloves when required , Hard Hats, and any other PPE Required based on the job or task. Compliance with Smurfit Westrock employment policies, handbook, and workplace safety policies, rules, and procedures. Submission of Safety Concerns and Safety Work Order / Incident Reporting and Learning / Basic understanding of the Safety Excellence System Follow the site management (General Manager, Plant Manager, Department Manager ,Shift Supervisor ) assignments for completing tasks and managing programs as part of the Safety Excellence System. Must follow Training Matix assigned in the Learning and Development System. Training could be assigned Annually, Quarterly or at the time of a new process / procedure. Must have a clear understanding of the STOP Work Process - Employees have the right to STOP the work at any time to gain a better understanding of the process or to ensure safety standards are met. QUALIFICATIONS: Must have secondary education, Trade schools, e.g., Industrial Maintenance Tech certification, Mechatronics, relevant associate degree, or 5 years of experience in lieu of degree/certificate Minimum 3 years' experience in Industrial Maintenance or Manufacturing Maintenance. Must be able to properly use rulers, calipers, micrometers, and other measuring instruments. Must have a working knowledge of AC/DC motors. Must be trained in basic electric and mechanical safety. Must have basic computer experience. e.g., CMMS - Computerized Maintenance Management System, Microsoft Office Must be knowledgeable in the safe use of hand and small power tools. Must pass color vision and color hue tests. Must be able to work on-call as needed. Must have acute troubleshooting skills. Must be able to maintain good attendance. Must be willing to work overtime as needed. Must be able to perform all essential functions of this job with or without reasonable accommodation. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.
About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring the best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Beverage Division manufactures a variety of packaging solutions for soft drinks, craft beers, coffees and teas as well as new energy drinks. Crown Beverage leads the packaging industry with innovative technologies that redefine how the world looks at beverage cans. With a large printable surface area and a wide range of sizes, shapes and decorating options, our aluminum cans are the perfect packaging format to create compelling brand presence where it counts. Here is your chance to join the Crown Beverage Division. Location: Olympia Position Overview: The Electrical Supervisor works closely with all aspects of the manufacturing process from the raw material to the finished product and support daily productions activities. This is a supervisory position, which would include the daily supervision of plant electricians as well as the management of plant construction, modifications, appropriations and equipment installation. Duties And Responsibilities: Reporting directly to the Plant Engineer, the Electrical Supervisors responsibilities would include, but not be limited to, the following: Applies electrical theory and related knowledge to test and modify developmental or operational electrical machinery, electrical control equipment and circuitry in industrial plant setting Oversees assembly and testing of experimental motor control devices, switch panels, transformers, generator windings, and other electrical equipment and components according to engineering data and knowledge of electrical principles Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective action Develops diagrams, drawings and specifications for modifications or expansions and directs personnel performing routine installation and maintenance duties Plans, directs and records periodic testing; recommends or initiates modification or replacement of equipment as needed Directs, coordinates, develops, trains, coaches and assesses employees Supports and encourages employees to work safely, efficiently and effectively Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements Bachelor's level new graduate in Engineering or equivalent discipline with two or more related co-op or internship work assignment in a manufacturing setting would be an alternate for the 5-7 years of work experience. Three to five years of experience in a high-speed manufacturing environment At least two years of proven supervisory experience Working knowledge of motor controls, VFD's, and DC drives. Installation, set-up and programming of PLC's Ability to design, modify and plot using AutoCAD software Process control systems - set-up and program applications (Honeywell) Instrumentation and calibration knowledge Facility power distribution Knowledge of building facilities (compressed air, water, hydraulics, vacuums, heating and cooling) Knowledge of control systems and sub-systems Must be available to work various shifts if needed and be able to work nights, weekends, and overtime to cover absences or provide additional support Approximately 5% overnight travel Preferred Requirements Packaging industry experience Electrical Journeyman's certification Green or black belt certification in Six Sigma Competencies Ability to work independently or with a team Strong problem-solving skills through an individual and/or collaborative approach Strong people and teamwork skills. Candidate should be able to demonstrate and articulate relevant experience in collaboration and team support. Must be able to look at new solutions and "think outside the box" Effective leadership skills such as conflict resolution, communication, decision making, etc. Demonstrated employee relations skills and the ability to motivate people Excellent time management and project management skills as well as the ability to multi-task Excellent oral and written communication skills Strong computer skills and working knowledge of various Microsoft programs (Excel, Word, Access, etc.) The ideal candidate will have a strong commitment to safety, quality and the knowledge of industrial electrical systems and devices, a positive attitude and a willingness to learn. Mechanical aptitude, knowledge and skills are key to this positions. Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 10 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Generally works in a plant environment but will be required to perform some job duties inside a typical office setting While performing the duties of this job, associate will be exposed to power sources While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic The associate may be exposed to a wide range of temperatures The noise level is frequently loud Possible Equivalent Military Titles Electronics Technician; Radar and Sonar Operator; Electronic Instrument and Equipment Repairer; Communications Equipment Operator; Avionics Technician Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Salary range for this position is: $103,869 - $127,523 Actual salary will be determined based on skill and experience level Benefits: Crown offers competitive pay, comprehensive benefits including free company paid health insurance for employees as well as company matched 401(k).
12/07/2025
Full time
About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring the best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Beverage Division manufactures a variety of packaging solutions for soft drinks, craft beers, coffees and teas as well as new energy drinks. Crown Beverage leads the packaging industry with innovative technologies that redefine how the world looks at beverage cans. With a large printable surface area and a wide range of sizes, shapes and decorating options, our aluminum cans are the perfect packaging format to create compelling brand presence where it counts. Here is your chance to join the Crown Beverage Division. Location: Olympia Position Overview: The Electrical Supervisor works closely with all aspects of the manufacturing process from the raw material to the finished product and support daily productions activities. This is a supervisory position, which would include the daily supervision of plant electricians as well as the management of plant construction, modifications, appropriations and equipment installation. Duties And Responsibilities: Reporting directly to the Plant Engineer, the Electrical Supervisors responsibilities would include, but not be limited to, the following: Applies electrical theory and related knowledge to test and modify developmental or operational electrical machinery, electrical control equipment and circuitry in industrial plant setting Oversees assembly and testing of experimental motor control devices, switch panels, transformers, generator windings, and other electrical equipment and components according to engineering data and knowledge of electrical principles Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective action Develops diagrams, drawings and specifications for modifications or expansions and directs personnel performing routine installation and maintenance duties Plans, directs and records periodic testing; recommends or initiates modification or replacement of equipment as needed Directs, coordinates, develops, trains, coaches and assesses employees Supports and encourages employees to work safely, efficiently and effectively Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements Bachelor's level new graduate in Engineering or equivalent discipline with two or more related co-op or internship work assignment in a manufacturing setting would be an alternate for the 5-7 years of work experience. Three to five years of experience in a high-speed manufacturing environment At least two years of proven supervisory experience Working knowledge of motor controls, VFD's, and DC drives. Installation, set-up and programming of PLC's Ability to design, modify and plot using AutoCAD software Process control systems - set-up and program applications (Honeywell) Instrumentation and calibration knowledge Facility power distribution Knowledge of building facilities (compressed air, water, hydraulics, vacuums, heating and cooling) Knowledge of control systems and sub-systems Must be available to work various shifts if needed and be able to work nights, weekends, and overtime to cover absences or provide additional support Approximately 5% overnight travel Preferred Requirements Packaging industry experience Electrical Journeyman's certification Green or black belt certification in Six Sigma Competencies Ability to work independently or with a team Strong problem-solving skills through an individual and/or collaborative approach Strong people and teamwork skills. Candidate should be able to demonstrate and articulate relevant experience in collaboration and team support. Must be able to look at new solutions and "think outside the box" Effective leadership skills such as conflict resolution, communication, decision making, etc. Demonstrated employee relations skills and the ability to motivate people Excellent time management and project management skills as well as the ability to multi-task Excellent oral and written communication skills Strong computer skills and working knowledge of various Microsoft programs (Excel, Word, Access, etc.) The ideal candidate will have a strong commitment to safety, quality and the knowledge of industrial electrical systems and devices, a positive attitude and a willingness to learn. Mechanical aptitude, knowledge and skills are key to this positions. Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 10 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Generally works in a plant environment but will be required to perform some job duties inside a typical office setting While performing the duties of this job, associate will be exposed to power sources While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic The associate may be exposed to a wide range of temperatures The noise level is frequently loud Possible Equivalent Military Titles Electronics Technician; Radar and Sonar Operator; Electronic Instrument and Equipment Repairer; Communications Equipment Operator; Avionics Technician Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Salary range for this position is: $103,869 - $127,523 Actual salary will be determined based on skill and experience level Benefits: Crown offers competitive pay, comprehensive benefits including free company paid health insurance for employees as well as company matched 401(k).
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
12/06/2025
Full time
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
12/06/2025
Full time
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
12/06/2025
Full time
Description: Summary: The electrical engineer technician designs, tests, and documents electrical/electronic system components for mobile equipment. The position applies knowledge of electrical/electronics, wireless communications, and programmable logic control systems. Essential Duties and Responsibilities: Design control system components including but not limited to motor controllers, wire harnesses, control panels, valve drivers, and wireless remote-control systems. Create schematics and wiring diagrams using CAD tools for communication with vendors, manufacturing department, and customer service. Generate and maintain wire harness drawings for manufacturing using CAD tools Develop visual aids and work instructions for installation of electrical products Troubleshoot and repair electrical/electronic components, including programmable controls, wire harnesses, power supplies, and test equipment. Develop specifications for purchasing, manufacturing, and installation standards. Responsible for complying with safety and quality systems procedures as required. Perform miscellaneous duties and projects as assigned and required. Act as a positive role model for all co-workers Promote a productive and non-disruptive work ethic within the company. Continuously promotes and fosters a culture of working safety. Perform other duties as assigned. General Competencies Required: Knowledge of electronics design techniques, tools, and principles. Operations Analysis and Critical Thinking Problem solving with emphasis on active learning Strong applied math and applied physics skills Strong orientation towards teamwork and collaboration Preferred Experience: Three to five years proven experience in the design and/or manufacturing of electrical/electronic products or electro-mechanical systems Skills Required: Computer proficiency with the ability to work with Microsoft 365 Suite. Experience with Zuken, Solidworks Electrical, or similar CAD-based schematic software Education and Experience: Associates degree or equivalent in related technical field combined with industry-specific experience. Physical Requirements: Occasional lifting may be required, items not to exceed 50 lbs. Additional Requirements: Company sponsored continuing education may be required. Travel is primarily local during the business day, although some out of the area or overnight travel may be expected. Valid drivers license. Requirements: Design & Engineering, Electrical Engineering PI58d26395ad21-3962
Industrial Mechanical Electrician (Journeyman Required) WHY DO YOU WANT TO WORK AT LIVEO RESEARCH? Career stability and opportunities for advancementComplete Benefit Package, medical, dental, vision, 401K with company match, Short Term Disability, Employee Life Generous 401K Match Liveo Research is a global manufacturer of rigid packaging solutions with five locations worldwide. Are you an experienced industrial electrician with a background in manufacturing, well then, we have a position for you. Come join our team! Key Responsibilities Electrical Maintenance & Troubleshooting: Perform routine and emergency electrical maintenance on all production equipment and systems (e.g., packaging machines, conveyors, HVAC systems, and control panels).Troubleshoot, diagnose, and repair electrical faults in machinery and equipment, including motors, drives, sensors, relays, and PLCs.Ensure electrical systems are operating within specified voltage, current, and safety parameters. Preventive Maintenance: Conduct scheduled preventive maintenance on electrical equipment to reduce downtime and increase equipment lifespan.Maintain an up-to-date record of maintenance activities, work orders, and repairs. System Upgrades & Modifications: Assist in the installation and commissioning of new electrical systems or upgrades to existing equipment.Work with the engineering team to improve and modify electrical systems to optimize performance. Safety & Compliance: Ensure all work adheres to industry safety standards, electrical codes, and GMP (Good Manufacturing Practices) regulations.Follow lockout/tagout (LOTO) procedures and other safety protocols when performing maintenance tasks.Participate in safety training and contribute to a safety-first environment. Collaboration & Support: Work closely with production and engineering teams to resolve electrical issues that may impact production schedules.Provide technical support and training to other maintenance staff or production employees as needed.Assist in the diagnosis and resolution of mechanical and pneumatic issues where electrical systems may be involved. Documentation & Reporting: Complete and maintain detailed maintenance logs, service records, and equipment specifications.Monitor inventory levels of electrical parts and supplies and communicate needs to the Maintenance Supervisor. Qualifications Education :High school diploma or equivalent; Associate's degree in Electrical Engineering, Industrial Maintenance, or a related field preferred. Experience :Minimum of 3 years of experience in electrical maintenance, preferably in a manufacturing environment (pharmaceutical packaging experience a plus).Proficiency in troubleshooting electrical circuits, controls, and PLC systems Skills & Knowledge :Strong understanding of electrical theory, controls, and industrial automation systems.Familiarity with PLC programming and troubleshooting (Siemens, Allen Bradley, or equivalent).Ability to read and interpret electrical schematics, wiring diagrams, and manuals.Knowledge of industry safety standards, including OSHA regulations and lockout/tagout procedures.Experience with preventive maintenance programs and techniques. Certifications (Preferred):Electrical or Industrial Maintenance certification (e.g., Journeyman Electrician, Certified Maintenance Technician).Knowledge of GMP and FDA regulations for the pharmaceutical industry is a plus General Employment Requirements Background Check required Drug Testing required Liveo Research is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Compensation details: 0 Yearly Salary PIb71a-0701
12/06/2025
Full time
Industrial Mechanical Electrician (Journeyman Required) WHY DO YOU WANT TO WORK AT LIVEO RESEARCH? Career stability and opportunities for advancementComplete Benefit Package, medical, dental, vision, 401K with company match, Short Term Disability, Employee Life Generous 401K Match Liveo Research is a global manufacturer of rigid packaging solutions with five locations worldwide. Are you an experienced industrial electrician with a background in manufacturing, well then, we have a position for you. Come join our team! Key Responsibilities Electrical Maintenance & Troubleshooting: Perform routine and emergency electrical maintenance on all production equipment and systems (e.g., packaging machines, conveyors, HVAC systems, and control panels).Troubleshoot, diagnose, and repair electrical faults in machinery and equipment, including motors, drives, sensors, relays, and PLCs.Ensure electrical systems are operating within specified voltage, current, and safety parameters. Preventive Maintenance: Conduct scheduled preventive maintenance on electrical equipment to reduce downtime and increase equipment lifespan.Maintain an up-to-date record of maintenance activities, work orders, and repairs. System Upgrades & Modifications: Assist in the installation and commissioning of new electrical systems or upgrades to existing equipment.Work with the engineering team to improve and modify electrical systems to optimize performance. Safety & Compliance: Ensure all work adheres to industry safety standards, electrical codes, and GMP (Good Manufacturing Practices) regulations.Follow lockout/tagout (LOTO) procedures and other safety protocols when performing maintenance tasks.Participate in safety training and contribute to a safety-first environment. Collaboration & Support: Work closely with production and engineering teams to resolve electrical issues that may impact production schedules.Provide technical support and training to other maintenance staff or production employees as needed.Assist in the diagnosis and resolution of mechanical and pneumatic issues where electrical systems may be involved. Documentation & Reporting: Complete and maintain detailed maintenance logs, service records, and equipment specifications.Monitor inventory levels of electrical parts and supplies and communicate needs to the Maintenance Supervisor. Qualifications Education :High school diploma or equivalent; Associate's degree in Electrical Engineering, Industrial Maintenance, or a related field preferred. Experience :Minimum of 3 years of experience in electrical maintenance, preferably in a manufacturing environment (pharmaceutical packaging experience a plus).Proficiency in troubleshooting electrical circuits, controls, and PLC systems Skills & Knowledge :Strong understanding of electrical theory, controls, and industrial automation systems.Familiarity with PLC programming and troubleshooting (Siemens, Allen Bradley, or equivalent).Ability to read and interpret electrical schematics, wiring diagrams, and manuals.Knowledge of industry safety standards, including OSHA regulations and lockout/tagout procedures.Experience with preventive maintenance programs and techniques. Certifications (Preferred):Electrical or Industrial Maintenance certification (e.g., Journeyman Electrician, Certified Maintenance Technician).Knowledge of GMP and FDA regulations for the pharmaceutical industry is a plus General Employment Requirements Background Check required Drug Testing required Liveo Research is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Compensation details: 0 Yearly Salary PIb71a-0701
JOB TITLE: Systems Engineering Integration & Test (SEIT) Engineer for Crypto and Cross Domain Solutions JOB LOCATION: Scottsdale, AZ WAGE RANGE : 50-54.94 JOB NUMBER: 25-03812 JOB DESCRIPTION: Our client, a large defense contractor, has an immediate opening for a Systems Engineering Integration & Test (SEIT) Engineer for Crypto and Cross Domain Solutions to work from their Scottsdale, AZ facility. As the Advanced Test Engineer, you'll participate in the planning of technical approaches, resources, schedules, budgets and equipment required for the testing and evaluating of new systems, products and special devices. Utilizing your expert knowledge and understanding of test engineering concepts and principles, you'll prepare test and diagnostic programs, design test fixtures and equipment, and complete specifications and procedures throughout the engineering development lifecycle. QUALIFICATIONS: Requires a Bachelor's degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A Bachelor's degree in Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience Proficient knowledge and experience with object-oriented programming, system processes and scripting languages Openly proposes ideas that enhance productivity and efficiency, solicits input, and optimizes solutions What sets you apart: Team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments Ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Commitment to ongoing professional development What you'll do: Participate in requirements analysis, functional analysis, performance analysis (e.g. timing, power, etc.), design (of test setups/approaches), integration and verification of test equipment/setups. Develop Test Cases, Test Procedures, Test Scripts ( Python, Bash, C), and associated test documentation (plans and reports) for formal test and verification activities. Support setup up test infrastructures and environments for performing various testing (and use of Git/GitLab) Support activities related to acquiring and setting up the test assets including identifying Bill of Materials (BOMs), working with material planners to procure materials/cables/equipment, working with Manufacturing/Operations to build, checkout, and setup the test assets and equipment. Support activities related to preparing for and conducting formal test events including Design Verification Testing (DVT), Qualification Testing (QT), Acceptance Testing (AT), EMI/EMC Testing, Radiation Testing, and other formal test events. Provide status inputs related to SEIT tasking from the team backlogs. Generally, work within the Systems Engineering Integration and Test group, but has some limited contact with other engineering and manufacturing Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
12/06/2025
Full time
JOB TITLE: Systems Engineering Integration & Test (SEIT) Engineer for Crypto and Cross Domain Solutions JOB LOCATION: Scottsdale, AZ WAGE RANGE : 50-54.94 JOB NUMBER: 25-03812 JOB DESCRIPTION: Our client, a large defense contractor, has an immediate opening for a Systems Engineering Integration & Test (SEIT) Engineer for Crypto and Cross Domain Solutions to work from their Scottsdale, AZ facility. As the Advanced Test Engineer, you'll participate in the planning of technical approaches, resources, schedules, budgets and equipment required for the testing and evaluating of new systems, products and special devices. Utilizing your expert knowledge and understanding of test engineering concepts and principles, you'll prepare test and diagnostic programs, design test fixtures and equipment, and complete specifications and procedures throughout the engineering development lifecycle. QUALIFICATIONS: Requires a Bachelor's degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A Bachelor's degree in Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience Proficient knowledge and experience with object-oriented programming, system processes and scripting languages Openly proposes ideas that enhance productivity and efficiency, solicits input, and optimizes solutions What sets you apart: Team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments Ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Commitment to ongoing professional development What you'll do: Participate in requirements analysis, functional analysis, performance analysis (e.g. timing, power, etc.), design (of test setups/approaches), integration and verification of test equipment/setups. Develop Test Cases, Test Procedures, Test Scripts ( Python, Bash, C), and associated test documentation (plans and reports) for formal test and verification activities. Support setup up test infrastructures and environments for performing various testing (and use of Git/GitLab) Support activities related to acquiring and setting up the test assets including identifying Bill of Materials (BOMs), working with material planners to procure materials/cables/equipment, working with Manufacturing/Operations to build, checkout, and setup the test assets and equipment. Support activities related to preparing for and conducting formal test events including Design Verification Testing (DVT), Qualification Testing (QT), Acceptance Testing (AT), EMI/EMC Testing, Radiation Testing, and other formal test events. Provide status inputs related to SEIT tasking from the team backlogs. Generally, work within the Systems Engineering Integration and Test group, but has some limited contact with other engineering and manufacturing Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician-Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications. Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems. Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions. Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages. Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy. Comply with all Federal, State, and Company regulations while performing duties. Collaborate with other crafts to assist in troubleshooting outside the central control system as needed. Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency. Communicate relevant information to succeeding shifts using management-approved methods. Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems. Maintain equipment records, logs, and updates, preparing reports and schedules as required. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion. Ensure system configurations comply with FAA and accreditation requirements. Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal). Understand electronic theory, computer and networking architecture, microprocessors, and discrete components. Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems. Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Perform tasks associated with other job classifications when necessary to complete assignments. Obtain and maintain applicable licenses, certificates, and certifications. Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems. Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance. 1+ years' experience troubleshooting programmable logic controllers (PLC). Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Ability to work overtime based on business requirements. Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment. Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams. Solid understanding of industrial electronic systems including HMIs, motor controls, PID loops, closed loop servo systems and electrical sensors. Experience working around 3 phase, industrial voltages 480v, 277v, 208v. Ability to work around electromagnetic fields as a result of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $47.00 per hour - $56.97 per hour. Applications for this position will be accepted until Dec. 31, 2025 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/06/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician-Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications. Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems. Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions. Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages. Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy. Comply with all Federal, State, and Company regulations while performing duties. Collaborate with other crafts to assist in troubleshooting outside the central control system as needed. Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency. Communicate relevant information to succeeding shifts using management-approved methods. Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems. Maintain equipment records, logs, and updates, preparing reports and schedules as required. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion. Ensure system configurations comply with FAA and accreditation requirements. Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal). Understand electronic theory, computer and networking architecture, microprocessors, and discrete components. Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems. Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Perform tasks associated with other job classifications when necessary to complete assignments. Obtain and maintain applicable licenses, certificates, and certifications. Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems. Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance. 1+ years' experience troubleshooting programmable logic controllers (PLC). Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Ability to work overtime based on business requirements. Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment. Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams. Solid understanding of industrial electronic systems including HMIs, motor controls, PID loops, closed loop servo systems and electrical sensors. Experience working around 3 phase, industrial voltages 480v, 277v, 208v. Ability to work around electromagnetic fields as a result of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $47.00 per hour - $56.97 per hour. Applications for this position will be accepted until Dec. 31, 2025 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
