Job Description AECOM Water is actively seeking a highly talented and responsible Construction Resident Engineer (Water Treatment Design Build) for immediate employment on our active onsite construction Progressive Design Build - Advanced Water Treatment project in San Diego, CA. This is the largest project of its kind and a unique opportunity to be part of innovation within the wastewater industry. The Construction RE will be responsible for the effective coordination of the engineering design and construction teams and will interact closely with the Design Team and Quality Control Managers. Experience with Municipal Water / Wastewater Construction projects along with the installation and startup of large wastewater process systems, associated electrical and automated controls equipment is a preference. The Construction Resident Engineer is the primary point of contact to the engineering design manager and serves in this role as the liaison and is responsible in providing the necessary direction upon design coordination with Contractors, Project Engineers, Inspectors, and their Owner/Agents. This Engineer additionally will have the primary responsibility for quality assurance of the construction. The Resident Engineer will actively participate in design and construction meetings along with the Contractor, Subcontractors, Project Engineer, and the Owner. This position requires candidate to be onsite in San Diego County (Santee), CA. Relocation assistance may be provided. Responsibilities include, but are not limited to, the following: Providing coordination review of Contractor and Vendor submittals for completeness and compliance with the specification requirements while monitoring the Submittal and RFI review process. Assist in the processing of all project submittals, DCN's, RFI's and RFC's Actively manage As-Build design drawings with the latest information resulting from submittal and RFI responses Facilitate and assist in communications between the Contractor, Owner, Project Design Engineer, and the Project Manager. Respond to Contractor letters of correspondence providing interpretation of contract drawings and specifications to resolve problems or conflicts arising on site. Participate in the review and evaluation of contractor claims and change order proposals. Issue Engineering or Client initiated changes or clarifications of the contract documents to the Contractor and make high-level assessment as to the rough order of magnitude and impact Work collectively with the Quality Manager to track progress, quality of work, materials and equipment received and/or installed being incorporated into the work. Serve as oversight of final inspections, assistance and or preparation of punch list and final determination as to the completeness and acceptability of the Work.
03/28/2024
Full time
Job Description AECOM Water is actively seeking a highly talented and responsible Construction Resident Engineer (Water Treatment Design Build) for immediate employment on our active onsite construction Progressive Design Build - Advanced Water Treatment project in San Diego, CA. This is the largest project of its kind and a unique opportunity to be part of innovation within the wastewater industry. The Construction RE will be responsible for the effective coordination of the engineering design and construction teams and will interact closely with the Design Team and Quality Control Managers. Experience with Municipal Water / Wastewater Construction projects along with the installation and startup of large wastewater process systems, associated electrical and automated controls equipment is a preference. The Construction Resident Engineer is the primary point of contact to the engineering design manager and serves in this role as the liaison and is responsible in providing the necessary direction upon design coordination with Contractors, Project Engineers, Inspectors, and their Owner/Agents. This Engineer additionally will have the primary responsibility for quality assurance of the construction. The Resident Engineer will actively participate in design and construction meetings along with the Contractor, Subcontractors, Project Engineer, and the Owner. This position requires candidate to be onsite in San Diego County (Santee), CA. Relocation assistance may be provided. Responsibilities include, but are not limited to, the following: Providing coordination review of Contractor and Vendor submittals for completeness and compliance with the specification requirements while monitoring the Submittal and RFI review process. Assist in the processing of all project submittals, DCN's, RFI's and RFC's Actively manage As-Build design drawings with the latest information resulting from submittal and RFI responses Facilitate and assist in communications between the Contractor, Owner, Project Design Engineer, and the Project Manager. Respond to Contractor letters of correspondence providing interpretation of contract drawings and specifications to resolve problems or conflicts arising on site. Participate in the review and evaluation of contractor claims and change order proposals. Issue Engineering or Client initiated changes or clarifications of the contract documents to the Contractor and make high-level assessment as to the rough order of magnitude and impact Work collectively with the Quality Manager to track progress, quality of work, materials and equipment received and/or installed being incorporated into the work. Serve as oversight of final inspections, assistance and or preparation of punch list and final determination as to the completeness and acceptability of the Work.
Job Description AECOM East Water group is seeking Senior Engineering Manager - Construction Managers. Positions are located in our New York, NY and Clifton, New Jersey offices. The candidate should have experience in the construction of heavy civil works and mechanical and electrical systems. Senior Engineering Manager - Construction Manager will oversee a staff of twelve resident engineers and construction inspectors, interact with program schedulers and safety personnel, coordinate with other consultant resident engineers and inspectors on multiple projects and coordinates with the various project design consultants on design issues. The responsibilities of this position also include, but are not limited to: The ideal candidate will also interact with the project contractors to assure compliance with design documents, lead change order negotiations as required, oversee the approvals of monthly pay applications and lead in the resolution of construction issues in a timely manner. Lead the Quality Assurance, Construction/ Construction Quality Assurance effort on the project. Primary responsibilities will include managing the activities of a multi- overall project management for, scheduling, familiarity with job cost reporting, and budget control activities through the life of the project, including EAC analysis during on-site construction as prime contracting entity. Fiscal Experience - Proven project management skills to delivery projects at or under budget and on schedule. Working knowledge of job accounting and reporting methods such as earned value and estimates to complete. Team Oriented - This position requires the skill set to directly oversee and manage detailed engineering and construction teams working collaboratively together to deliver the project Review of monthly client Reports Approves correspondence related to construction and identifies key issues regarding disputed work, delays, additional and supplemental work, and non-conforming work; and Ensures that safety monitoring activities within the Program's scope of work are being accomplished. Final review and authorization of contractor payments including confirmation of Prevailing Wage interviews with trades. Responsible for review and resolution and/or approval of Inspector and Contractor reporting, forms, testing, compliance and coordination issues Monitoring and reporting on the contractor activities during the performance of the work to determine if the work is being constructed in accordance with the contract documents Primary receiver and reviewer of responses for all project correspondence.
03/28/2024
Full time
Job Description AECOM East Water group is seeking Senior Engineering Manager - Construction Managers. Positions are located in our New York, NY and Clifton, New Jersey offices. The candidate should have experience in the construction of heavy civil works and mechanical and electrical systems. Senior Engineering Manager - Construction Manager will oversee a staff of twelve resident engineers and construction inspectors, interact with program schedulers and safety personnel, coordinate with other consultant resident engineers and inspectors on multiple projects and coordinates with the various project design consultants on design issues. The responsibilities of this position also include, but are not limited to: The ideal candidate will also interact with the project contractors to assure compliance with design documents, lead change order negotiations as required, oversee the approvals of monthly pay applications and lead in the resolution of construction issues in a timely manner. Lead the Quality Assurance, Construction/ Construction Quality Assurance effort on the project. Primary responsibilities will include managing the activities of a multi- overall project management for, scheduling, familiarity with job cost reporting, and budget control activities through the life of the project, including EAC analysis during on-site construction as prime contracting entity. Fiscal Experience - Proven project management skills to delivery projects at or under budget and on schedule. Working knowledge of job accounting and reporting methods such as earned value and estimates to complete. Team Oriented - This position requires the skill set to directly oversee and manage detailed engineering and construction teams working collaboratively together to deliver the project Review of monthly client Reports Approves correspondence related to construction and identifies key issues regarding disputed work, delays, additional and supplemental work, and non-conforming work; and Ensures that safety monitoring activities within the Program's scope of work are being accomplished. Final review and authorization of contractor payments including confirmation of Prevailing Wage interviews with trades. Responsible for review and resolution and/or approval of Inspector and Contractor reporting, forms, testing, compliance and coordination issues Monitoring and reporting on the contractor activities during the performance of the work to determine if the work is being constructed in accordance with the contract documents Primary receiver and reviewer of responses for all project correspondence.
Job Description AECOM East Water group is seeking Senior Engineering Manager - Construction Managers. Positions are located in our New York and Clifton, New Jersey offices. The candidate should have experience in the construction of heavy civil works and mechanical and electrical systems. Senior Engineering Manager - Construction Manager will oversee a staff of twelve resident engineers and construction inspectors, interact with program schedulers and safety personnel, coordinate with other consultant resident engineers and inspectors on multiple projects and coordinates with the various project design consultants on design issues. The responsibilities of this position also include, but are not limited to: The ideal candidate will also interact with the project contractors to assure compliance with design documents, lead change order negotiations as required, oversee the approvals of monthly pay applications and lead in the resolution of construction issues in a timely manner. Lead the Quality Assurance, Construction/ Construction Quality Assurance effort on the project. Primary responsibilities will include managing the activities of a multi- overall project management for, scheduling, familiarity with job cost reporting, and budget control activities through the life of the project, including EAC analysis during on-site construction as prime contracting entity. Fiscal Experience - Proven project management skills to delivery projects at or under budget and on schedule. Working knowledge of job accounting and reporting methods such as earned value and estimates to complete. Team Oriented - This position requires the skill set to directly oversee and manage detailed engineering and construction teams working collaboratively together to deliver the project Review of monthly client Reports Approves correspondence related to construction and identifies key issues regarding disputed work, delays, additional and supplemental work, and non-conforming work; and Ensures that safety monitoring activities within the Program's scope of work are being accomplished. Final review and authorization of contractor payments including confirmation of Prevailing Wage interviews with trades. Responsible for review and resolution and/or approval of Inspector and Contractor reporting, forms, testing, compliance and coordination issues Monitoring and reporting on the contractor activities during the performance of the work to determine if the work is being constructed in accordance with the contract documents Primary receiver and reviewer of responses for all project correspondence.
03/28/2024
Full time
Job Description AECOM East Water group is seeking Senior Engineering Manager - Construction Managers. Positions are located in our New York and Clifton, New Jersey offices. The candidate should have experience in the construction of heavy civil works and mechanical and electrical systems. Senior Engineering Manager - Construction Manager will oversee a staff of twelve resident engineers and construction inspectors, interact with program schedulers and safety personnel, coordinate with other consultant resident engineers and inspectors on multiple projects and coordinates with the various project design consultants on design issues. The responsibilities of this position also include, but are not limited to: The ideal candidate will also interact with the project contractors to assure compliance with design documents, lead change order negotiations as required, oversee the approvals of monthly pay applications and lead in the resolution of construction issues in a timely manner. Lead the Quality Assurance, Construction/ Construction Quality Assurance effort on the project. Primary responsibilities will include managing the activities of a multi- overall project management for, scheduling, familiarity with job cost reporting, and budget control activities through the life of the project, including EAC analysis during on-site construction as prime contracting entity. Fiscal Experience - Proven project management skills to delivery projects at or under budget and on schedule. Working knowledge of job accounting and reporting methods such as earned value and estimates to complete. Team Oriented - This position requires the skill set to directly oversee and manage detailed engineering and construction teams working collaboratively together to deliver the project Review of monthly client Reports Approves correspondence related to construction and identifies key issues regarding disputed work, delays, additional and supplemental work, and non-conforming work; and Ensures that safety monitoring activities within the Program's scope of work are being accomplished. Final review and authorization of contractor payments including confirmation of Prevailing Wage interviews with trades. Responsible for review and resolution and/or approval of Inspector and Contractor reporting, forms, testing, compliance and coordination issues Monitoring and reporting on the contractor activities during the performance of the work to determine if the work is being constructed in accordance with the contract documents Primary receiver and reviewer of responses for all project correspondence.
Job Description AECOM is seeking a Construction Field Engineer to be based in Murray, Utah. Job Summary/Responsibilities Under limited supervision, conducts work requiring independent evaluation, selection, adaptation and modification of standard techniques, procedures and criteria. Assist the Resident Engineer in their duties. Participate in submittal, RFI, RFC, construction submittal reviews, claim reviews and draft responses for review by the Resident Engineer. Monitor and report on construction progress. Participate in meetings. Coordinate the work of field inspectors. Assist the RE in managing project field staff and perform field inspection and documentation of Contractor's activities. Perform field measurements for quantity calculations and reporting for pay estimates. Communicate effectively with the project team, including Clients, Contractors, and Project Stakeholders. Works on projects of substantial complexity. May assume lead responsibilities for a team of engineers and professional support personnel. Provide quality inspection to ensure that job is being built in accordance with approved plans.
03/27/2024
Full time
Job Description AECOM is seeking a Construction Field Engineer to be based in Murray, Utah. Job Summary/Responsibilities Under limited supervision, conducts work requiring independent evaluation, selection, adaptation and modification of standard techniques, procedures and criteria. Assist the Resident Engineer in their duties. Participate in submittal, RFI, RFC, construction submittal reviews, claim reviews and draft responses for review by the Resident Engineer. Monitor and report on construction progress. Participate in meetings. Coordinate the work of field inspectors. Assist the RE in managing project field staff and perform field inspection and documentation of Contractor's activities. Perform field measurements for quantity calculations and reporting for pay estimates. Communicate effectively with the project team, including Clients, Contractors, and Project Stakeholders. Works on projects of substantial complexity. May assume lead responsibilities for a team of engineers and professional support personnel. Provide quality inspection to ensure that job is being built in accordance with approved plans.
Job Description The AECOM Construction Management Practice is seeking a Construction Engineer (Junior Inspector II) to join our Construction Management team based in Glen Allen, VA. The successful candidate will work with a diverse team of technical leaders across a broad range of practice areas delivering professional construction inspection services to our key clients. The successful candidate will join an established team performing construction inspection and oversight on capital improvement projects for AECOM's client, the City of Richmond's Department of Public Utilities. This position requires the ability to read and interpret technical design drawings, excellent written and spoken communication skills, organizational and time management skills, flexibility to work on a range of projects, and a positive attitude. The successful candidate will have the ability to communicate effectively with members of the project team, clients, site personnel and office management, and have the ability to work both independently and as a part of a project team. The successful candidate will be committed to the team's success and growth; will rigorously apply safety policies and procedures; will manage the technical, and schedule elements of project inspection and delivery; and will effectively manage the quality of field efforts and project deliverables within the bounds of the AECOM Quality Management System. The job responsibilities for the position include, but will not be limited to: Under general supervision, monitor and document construction activities of the construction contractor to ensure compliance with the plans and specifications Displays knowledge and abilities to perform daily quality assurance inspections to assure the contractor's workmanship meets industry standards, is high quality, and that materials and equipment meet or exceed the requirements of the plans and specifications Compares materials and equipment installed with approved submittals, shop drawings, requests for information, and change orders and take appropriate action if unapproved materials or equipment are utilized Displays applications of sound professional judgment on details of work Prepare and submit a daily inspection report to AECOM's construction manager Performs project quantity surveys for tracking, reporting, and contractor payment purposes Coordinates field matters, as necessary, between client personnel, contractor, design engineers, and third party entities such as property owners, business, and other entities associated with the project.
03/27/2024
Full time
Job Description The AECOM Construction Management Practice is seeking a Construction Engineer (Junior Inspector II) to join our Construction Management team based in Glen Allen, VA. The successful candidate will work with a diverse team of technical leaders across a broad range of practice areas delivering professional construction inspection services to our key clients. The successful candidate will join an established team performing construction inspection and oversight on capital improvement projects for AECOM's client, the City of Richmond's Department of Public Utilities. This position requires the ability to read and interpret technical design drawings, excellent written and spoken communication skills, organizational and time management skills, flexibility to work on a range of projects, and a positive attitude. The successful candidate will have the ability to communicate effectively with members of the project team, clients, site personnel and office management, and have the ability to work both independently and as a part of a project team. The successful candidate will be committed to the team's success and growth; will rigorously apply safety policies and procedures; will manage the technical, and schedule elements of project inspection and delivery; and will effectively manage the quality of field efforts and project deliverables within the bounds of the AECOM Quality Management System. The job responsibilities for the position include, but will not be limited to: Under general supervision, monitor and document construction activities of the construction contractor to ensure compliance with the plans and specifications Displays knowledge and abilities to perform daily quality assurance inspections to assure the contractor's workmanship meets industry standards, is high quality, and that materials and equipment meet or exceed the requirements of the plans and specifications Compares materials and equipment installed with approved submittals, shop drawings, requests for information, and change orders and take appropriate action if unapproved materials or equipment are utilized Displays applications of sound professional judgment on details of work Prepare and submit a daily inspection report to AECOM's construction manager Performs project quantity surveys for tracking, reporting, and contractor payment purposes Coordinates field matters, as necessary, between client personnel, contractor, design engineers, and third party entities such as property owners, business, and other entities associated with the project.
Position Summary Engineer II - Environmental is responsible using the principles of engineering, soil science, biology, and chemistry to develop solutions to environmental problems. Ability to improve recycling, waste disposal, public health, and water and air pollution control while addressing global issues, such as unsafe drinking water, climate change, and environmental sustainability. Supervisor Responsibilities This position does not have supervisory responsibilities over other employees. Essential Duties and Responsibilities Monitoring - Water wells, Ponds, Method 9, WYPDES, Impoundments, Air quality (TEOM's & MET stations), Storm Water. Reclamation activities - Overburden sampling, topsoil compliance and disking, reclamation tracking and reporting, bond release and tracking. Waste Management - Reporting and tracking recycled waste, SPCC plan maintenance. Project Engineering - Design and construction management of drainage and road projects Provide information and answers to staff, management, and mining operations. Provide MSHA/State Mine Inspectors an annual MSHA sediment pond report. Provide information and answers to business partners and regulatory agencies. Responsible for expenditures on projects and work contracts for reclamation work. Perform related work as required. Typical Physical Demands Requires prolonged sitting, some bending, stooping and stretching. Requires constant data input for extended periods of time without leaving the work area. Occasionally lifting files or paper weighing up to 30 pounds. Requires eye-hand coordination and manual dexterity sufficient to operate a keyboard, photocopier, telephone, calculator, and other office equipment. Requires normal range of hearing and eyesight to record, prepare, and communicate appropriate reports. Requires mobility sufficient to travel. Typical Working Conditions Normal office environment. Occasional evening or weekend work. Education and Experience Bachelor's Degree from an accredited college or university in Environmental Engineering. Minimum 5 years of related work experience. Any equivalent combination of training, education, and experience that provides the required skills, knowledge and abilities. Licenses, Registration, and Certifications Ability to obtain MSHA pond inspector certification, and EPA opacity certification within 12 months of hire. Skills/Competencies Communication Problem Solving Organizational Skills Teamwork Revised: March 2020 Enviromental The Company rather than management retains the discretion to add to or change duties of position at any time. Other details Job Family :Superintendents Job Function :Operations Pay Type :Salary Travel Required :No Required Education :Bachelor's Degree Job Start Date :Tuesday, March 26, 2024 Job End Date :Tuesday, April 2, 2024
03/27/2024
Full time
Position Summary Engineer II - Environmental is responsible using the principles of engineering, soil science, biology, and chemistry to develop solutions to environmental problems. Ability to improve recycling, waste disposal, public health, and water and air pollution control while addressing global issues, such as unsafe drinking water, climate change, and environmental sustainability. Supervisor Responsibilities This position does not have supervisory responsibilities over other employees. Essential Duties and Responsibilities Monitoring - Water wells, Ponds, Method 9, WYPDES, Impoundments, Air quality (TEOM's & MET stations), Storm Water. Reclamation activities - Overburden sampling, topsoil compliance and disking, reclamation tracking and reporting, bond release and tracking. Waste Management - Reporting and tracking recycled waste, SPCC plan maintenance. Project Engineering - Design and construction management of drainage and road projects Provide information and answers to staff, management, and mining operations. Provide MSHA/State Mine Inspectors an annual MSHA sediment pond report. Provide information and answers to business partners and regulatory agencies. Responsible for expenditures on projects and work contracts for reclamation work. Perform related work as required. Typical Physical Demands Requires prolonged sitting, some bending, stooping and stretching. Requires constant data input for extended periods of time without leaving the work area. Occasionally lifting files or paper weighing up to 30 pounds. Requires eye-hand coordination and manual dexterity sufficient to operate a keyboard, photocopier, telephone, calculator, and other office equipment. Requires normal range of hearing and eyesight to record, prepare, and communicate appropriate reports. Requires mobility sufficient to travel. Typical Working Conditions Normal office environment. Occasional evening or weekend work. Education and Experience Bachelor's Degree from an accredited college or university in Environmental Engineering. Minimum 5 years of related work experience. Any equivalent combination of training, education, and experience that provides the required skills, knowledge and abilities. Licenses, Registration, and Certifications Ability to obtain MSHA pond inspector certification, and EPA opacity certification within 12 months of hire. Skills/Competencies Communication Problem Solving Organizational Skills Teamwork Revised: March 2020 Enviromental The Company rather than management retains the discretion to add to or change duties of position at any time. Other details Job Family :Superintendents Job Function :Operations Pay Type :Salary Travel Required :No Required Education :Bachelor's Degree Job Start Date :Tuesday, March 26, 2024 Job End Date :Tuesday, April 2, 2024
Job Description AECOM is currently seeking a Construction Engineer for our Baltimore, MD office. This person will acts as the liaison between Project Manager / Resident Engineer and client on construction projects, providing technical and administrative information to all parties involved in the project for our Baltimore, MD office area. This position requires an individual who possess technical knowledge and will work in an office environment in a more administrative function. Serve as the PM'S representative on all meetings with contractors, client agencies and utility companies. Act as liaisons between project management, subcontractors, and site engineers to resolve emerging issues to prevent problems before they stall the project's progress. The duties of the office engineer will depend on project and type of construction, coordinating different parties involved in a project or program, and implementing the client and AECOM's policies, procedures, regulations and guidelines. This is an onsite role and is not remote or /telecommute. Construction Engineer /Project Coordinator Duties and Responsibilities will be but not limited to the following: Assisting in the management of construction contracts: Which include preparing, processing, implementing contract modifications, submittals and participate in contract negotiations. Managing Submittals and Requests For Information and Reports: Responsible for the accurate processing of submittals to ensure the correct products and materials are installed throughout the project Manage the submittal logs and coordinate submittal drawings with subcontractors Prepare transmittals and draft correspondence for the Resident Engineer Assist with the preparation of as-built drawings and assemble the project records for close-out Review all Inspector's Daily Reports (IRDs) for accurate reporting Prepare monthly progress reports to include schedules, costs spreadsheets, and perform analysis Maintain Accurate Project Records: Organize project records/documents to allow ease of access for the project manager and other project members Manage documentation of as-built conditions of construction facilities Assist the Project Manager / Resident Engineer with the preparation of meeting agendas and prepare minutes of all meetings Ensure compliance with Project requirements and standards: Verify contractors and all other contract work are compliant with the terms of the contract Ensure project work is in compliance with industry standards, specifications, building codes, and design guidelines Ensure submittal packets contain relevant engineering drawings, designs, and specifications for of bid document Assist with the monitoring of project budgets and expenditures and communicate any issues to the project team in a timely manner: Responsible for monitoring project status Check all quantity calculations of completed work Verify all material certifications are on file and all material testing has been performed and passed before recommending payment to the contractor for completed work Assist with preparing and maintaining schedules for the projects Maintain and monitor site project schedule and progress as per CPM method and inform job progress to Project team Responsible project updates and maintenance through Project Management software MS Project, Primavera etc.
03/26/2024
Full time
Job Description AECOM is currently seeking a Construction Engineer for our Baltimore, MD office. This person will acts as the liaison between Project Manager / Resident Engineer and client on construction projects, providing technical and administrative information to all parties involved in the project for our Baltimore, MD office area. This position requires an individual who possess technical knowledge and will work in an office environment in a more administrative function. Serve as the PM'S representative on all meetings with contractors, client agencies and utility companies. Act as liaisons between project management, subcontractors, and site engineers to resolve emerging issues to prevent problems before they stall the project's progress. The duties of the office engineer will depend on project and type of construction, coordinating different parties involved in a project or program, and implementing the client and AECOM's policies, procedures, regulations and guidelines. This is an onsite role and is not remote or /telecommute. Construction Engineer /Project Coordinator Duties and Responsibilities will be but not limited to the following: Assisting in the management of construction contracts: Which include preparing, processing, implementing contract modifications, submittals and participate in contract negotiations. Managing Submittals and Requests For Information and Reports: Responsible for the accurate processing of submittals to ensure the correct products and materials are installed throughout the project Manage the submittal logs and coordinate submittal drawings with subcontractors Prepare transmittals and draft correspondence for the Resident Engineer Assist with the preparation of as-built drawings and assemble the project records for close-out Review all Inspector's Daily Reports (IRDs) for accurate reporting Prepare monthly progress reports to include schedules, costs spreadsheets, and perform analysis Maintain Accurate Project Records: Organize project records/documents to allow ease of access for the project manager and other project members Manage documentation of as-built conditions of construction facilities Assist the Project Manager / Resident Engineer with the preparation of meeting agendas and prepare minutes of all meetings Ensure compliance with Project requirements and standards: Verify contractors and all other contract work are compliant with the terms of the contract Ensure project work is in compliance with industry standards, specifications, building codes, and design guidelines Ensure submittal packets contain relevant engineering drawings, designs, and specifications for of bid document Assist with the monitoring of project budgets and expenditures and communicate any issues to the project team in a timely manner: Responsible for monitoring project status Check all quantity calculations of completed work Verify all material certifications are on file and all material testing has been performed and passed before recommending payment to the contractor for completed work Assist with preparing and maintaining schedules for the projects Maintain and monitor site project schedule and progress as per CPM method and inform job progress to Project team Responsible project updates and maintenance through Project Management software MS Project, Primavera etc.
Jacobs is seeking a full-time Lead Construction Quality Inspector who will report directly to the Project Quality Assurance Manager (PQAM) and support the Construction Manager (CM) for field-related quality process concerns. The Lead CQI supports the Jacobs QA team by leading a team of CQI's and performing direct observations and oversight of subcontractors' implementation of their quality assurance program, plans, and procedures to ensure effective implementation and verbatim compliance is maintained. This will include the arrangements needed to ensure quality during the subcontractor's procurement, manufacture, and construction phase for systems, structures, and components (SSCs). The Lead CQI works with internal Jacobs departments and subcontractors to address ongoing quality issues, continued process improvements, and ensure internal and external quality requirements are met. The Lead CQI is responsible for overseeing their assigned team and subcontractor's quality interfaces, performance, and reporting internal and subcontractor programmatic/process compliance issues/concerns to Jacobs Quality and Construction Management. The role requires direct involvement in the interactions between Subcontractors, Engineering & Design (Title III), Procurement, Auditors, and Inspection & Test Agencies (ITA's), as necessary to support the Spent Fuel Handling Recapitalization Project (SFHP) Facility construction activities. The Lead CQI needs to work well with others, effectively communicate, and have sufficient knowledge to provide guidance and direction to internal/external customers to reduce quality issues and defects, proactively identify risks, and lead initiatives to assure the applicable requirements are met. At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. With $13 billion in revenue and a talent force of more than 55,000, Jacobs provides a full spectrum of professional services including consulting, technical, scientific, and project delivery for the government and private sector. The Jacobs business model allows us to successfully service our clients, leverage our integrated services, and provide our employees with growth opportunities while delivering global solutions to our client's local programs. We consistently receive high rankings from Engineering News-Record (ENR) in many classifications, including the categories of Top Design Firms, Top Contractors, Top Green Buildings Design Firms, and Top Transportation Companies. The Lead CQI duties require the successful candidate to be present on-site for work. The SFHP Facility site is located in Scoville, Idaho (approximately 51 miles from Idaho Falls, Idaho). This is not a remote or hybrid position. Responsibilities: Provide leadership to a team of assigned CQI's for the assigned discipline to ensure the team is supporting the project sufficiently in accordance with the project requirements and provide mentorship, guidance, and direction as needed to the team. Providing feedback to the PQAM on CQI performance, assignment, and resource needs. Develop and implement a strategy and arrangements for independent observations/oversight activities as required, to ensure that the subcontractor meets specified quality requirements. Effectively communicate and have sufficient knowledge of the invoked Codes and Standards for the project to provide guidance, direction, mentorship, and leadership to a team of CQI's under the assigned Lead discipline. Schedule, perform, and record direct observations and oversight of activities affecting quality to ensure subcontractors' and the assigned CQI team can effectively implement the approved quality plans and procedures (internal/external). Provide review and oversight of the CQI teams documentation and reports of daily work journals. Additionally, document and report the outcomes of witnessed activities daily. Identify, track, and report internal and Subcontractor Key Performance Indicators (KPIs) for the assigned lead discipline. Reporting quantitative metrics to the PQAM monthly. Monitor and evaluate internal assigned CQI team, and subcontractor performance and make recommendations based on analytics (quantitative and qualitative). Develop and maintain a required level of independence necessary to perform adequate oversight activities of the Subcontractor's quality control and quality assurance processes. Ensure the assigned CQI team understands the necessity and their role within the oversight model. Generate and issue daily oversight reports, weekly progress reports, and monthly metrics related to Jacobs internal implementation (CQI's) and the assigned subcontractor's compliance performance. Identify, track, and report key performance indicators for Jacobs internal implementation (CQI's) and the assigned subcontractor's compliance performance to the projects internal and external stakeholders (PQAM, CMP, CM, PM, DPE, Client counterparts, etc.) Facilitate and support interfaces internal within Jacobs and external customers on quality matters related to the assigned lead discipline area. Effectively implement the review and approvals process and lead a team of CQI's through the performance of review and approval of supplier submittals for compliance with contract requirements. Lead a team to perform in-process document/record reviews to support an expedited turnover of records upon completion of work. Audit subcontractor-delivered quality documentation and records for completeness and compliance with project requirements. Perform subcontractor quality system assessments, if qualified, and performance evaluations. Lead a team and perform reviews of oversight observations/findings, and non-conformities and when appropriate contribute input for Title III support regarding non-conformance, corrective actions, and troubleshooting. Identify and evaluate subcontractor trends in process conformity and evaluate whether corrective actions are appropriate while analyzing (trend tracking) subcontractor data. Actively support the safety culture and ensures integration of quality in relevant processes by complying with the requirements of the Project Quality Assurance Plan. Qualifications - External BS Quality/Business/Technical/Engineering or related field from an accredited college or university and five (5) years of demonstrated, applicable experience; or ten (10) years of demonstrated applicable experience in the construction quality industry. Advanced knowledge and application of applicable nuclear codes and standards, including 10 CFR 830 Subpart A, DOE Order 414.1D, and quality standard ASME NQA-1-2008/ASME NQA-1a-2009 Addenda, and commercial standards including ISO-9001:2015 and ISO 17025:2017 Laboratory Systems is required. Certified Nuclear Lead Auditor credentials are preferred, or advanced experience participating in and supporting quality assessments, surveillances, audits and/or causal analysis. Ability to obtain a lead auditor qualification within one (1) year, is required. Demonstrated ability to effectively communicate with all levels of personnel across multiple organizations to solve complex problems. Proven ability to plan, prioritize, and schedule work to ensure completion in accordance with requirements, deadlines, and budget. Comprehensive knowledge, understanding, and ability to apply codes, standards, and regulatory requirements. Experience in Commercial Grade Dedication (CGD). Extensive knowledge and understanding across a broad range of nuclear quality issues. Models and provides role model behavior in line with company values. Strong champion and agent of people to foster a culture of high compliance to quality standards and create, maintain, and implement standardized internal and subcontractor quality policies and processes. Essential Functions: Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements are limited to 40 lbs. in the form of supplies, drawings, etc. Hand manipulation is required for simple grasping, pushing, and pulling, and fine manipulation. Right and/or left hands utilized. Occasional need to reach and/or work above the shoulder, as well as below the shoulder. Must be alert to equipment in the field, there may be occasional travel, may include work near construction job site equipment when in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. At Jacobs, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, and expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Jacobs.
03/26/2024
Full time
Jacobs is seeking a full-time Lead Construction Quality Inspector who will report directly to the Project Quality Assurance Manager (PQAM) and support the Construction Manager (CM) for field-related quality process concerns. The Lead CQI supports the Jacobs QA team by leading a team of CQI's and performing direct observations and oversight of subcontractors' implementation of their quality assurance program, plans, and procedures to ensure effective implementation and verbatim compliance is maintained. This will include the arrangements needed to ensure quality during the subcontractor's procurement, manufacture, and construction phase for systems, structures, and components (SSCs). The Lead CQI works with internal Jacobs departments and subcontractors to address ongoing quality issues, continued process improvements, and ensure internal and external quality requirements are met. The Lead CQI is responsible for overseeing their assigned team and subcontractor's quality interfaces, performance, and reporting internal and subcontractor programmatic/process compliance issues/concerns to Jacobs Quality and Construction Management. The role requires direct involvement in the interactions between Subcontractors, Engineering & Design (Title III), Procurement, Auditors, and Inspection & Test Agencies (ITA's), as necessary to support the Spent Fuel Handling Recapitalization Project (SFHP) Facility construction activities. The Lead CQI needs to work well with others, effectively communicate, and have sufficient knowledge to provide guidance and direction to internal/external customers to reduce quality issues and defects, proactively identify risks, and lead initiatives to assure the applicable requirements are met. At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. With $13 billion in revenue and a talent force of more than 55,000, Jacobs provides a full spectrum of professional services including consulting, technical, scientific, and project delivery for the government and private sector. The Jacobs business model allows us to successfully service our clients, leverage our integrated services, and provide our employees with growth opportunities while delivering global solutions to our client's local programs. We consistently receive high rankings from Engineering News-Record (ENR) in many classifications, including the categories of Top Design Firms, Top Contractors, Top Green Buildings Design Firms, and Top Transportation Companies. The Lead CQI duties require the successful candidate to be present on-site for work. The SFHP Facility site is located in Scoville, Idaho (approximately 51 miles from Idaho Falls, Idaho). This is not a remote or hybrid position. Responsibilities: Provide leadership to a team of assigned CQI's for the assigned discipline to ensure the team is supporting the project sufficiently in accordance with the project requirements and provide mentorship, guidance, and direction as needed to the team. Providing feedback to the PQAM on CQI performance, assignment, and resource needs. Develop and implement a strategy and arrangements for independent observations/oversight activities as required, to ensure that the subcontractor meets specified quality requirements. Effectively communicate and have sufficient knowledge of the invoked Codes and Standards for the project to provide guidance, direction, mentorship, and leadership to a team of CQI's under the assigned Lead discipline. Schedule, perform, and record direct observations and oversight of activities affecting quality to ensure subcontractors' and the assigned CQI team can effectively implement the approved quality plans and procedures (internal/external). Provide review and oversight of the CQI teams documentation and reports of daily work journals. Additionally, document and report the outcomes of witnessed activities daily. Identify, track, and report internal and Subcontractor Key Performance Indicators (KPIs) for the assigned lead discipline. Reporting quantitative metrics to the PQAM monthly. Monitor and evaluate internal assigned CQI team, and subcontractor performance and make recommendations based on analytics (quantitative and qualitative). Develop and maintain a required level of independence necessary to perform adequate oversight activities of the Subcontractor's quality control and quality assurance processes. Ensure the assigned CQI team understands the necessity and their role within the oversight model. Generate and issue daily oversight reports, weekly progress reports, and monthly metrics related to Jacobs internal implementation (CQI's) and the assigned subcontractor's compliance performance. Identify, track, and report key performance indicators for Jacobs internal implementation (CQI's) and the assigned subcontractor's compliance performance to the projects internal and external stakeholders (PQAM, CMP, CM, PM, DPE, Client counterparts, etc.) Facilitate and support interfaces internal within Jacobs and external customers on quality matters related to the assigned lead discipline area. Effectively implement the review and approvals process and lead a team of CQI's through the performance of review and approval of supplier submittals for compliance with contract requirements. Lead a team to perform in-process document/record reviews to support an expedited turnover of records upon completion of work. Audit subcontractor-delivered quality documentation and records for completeness and compliance with project requirements. Perform subcontractor quality system assessments, if qualified, and performance evaluations. Lead a team and perform reviews of oversight observations/findings, and non-conformities and when appropriate contribute input for Title III support regarding non-conformance, corrective actions, and troubleshooting. Identify and evaluate subcontractor trends in process conformity and evaluate whether corrective actions are appropriate while analyzing (trend tracking) subcontractor data. Actively support the safety culture and ensures integration of quality in relevant processes by complying with the requirements of the Project Quality Assurance Plan. Qualifications - External BS Quality/Business/Technical/Engineering or related field from an accredited college or university and five (5) years of demonstrated, applicable experience; or ten (10) years of demonstrated applicable experience in the construction quality industry. Advanced knowledge and application of applicable nuclear codes and standards, including 10 CFR 830 Subpart A, DOE Order 414.1D, and quality standard ASME NQA-1-2008/ASME NQA-1a-2009 Addenda, and commercial standards including ISO-9001:2015 and ISO 17025:2017 Laboratory Systems is required. Certified Nuclear Lead Auditor credentials are preferred, or advanced experience participating in and supporting quality assessments, surveillances, audits and/or causal analysis. Ability to obtain a lead auditor qualification within one (1) year, is required. Demonstrated ability to effectively communicate with all levels of personnel across multiple organizations to solve complex problems. Proven ability to plan, prioritize, and schedule work to ensure completion in accordance with requirements, deadlines, and budget. Comprehensive knowledge, understanding, and ability to apply codes, standards, and regulatory requirements. Experience in Commercial Grade Dedication (CGD). Extensive knowledge and understanding across a broad range of nuclear quality issues. Models and provides role model behavior in line with company values. Strong champion and agent of people to foster a culture of high compliance to quality standards and create, maintain, and implement standardized internal and subcontractor quality policies and processes. Essential Functions: Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements are limited to 40 lbs. in the form of supplies, drawings, etc. Hand manipulation is required for simple grasping, pushing, and pulling, and fine manipulation. Right and/or left hands utilized. Occasional need to reach and/or work above the shoulder, as well as below the shoulder. Must be alert to equipment in the field, there may be occasional travel, may include work near construction job site equipment when in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. At Jacobs, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, and expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Jacobs.
WEC Energy Group is one of the nation's largest electric generation, distribution and natural gas delivery holding companies. We employ over 7,000 people in our energy companies and service subsidiaries. As a Fortune 500 company, we value and develop our employees who are making a difference in a mission that matters. Job Summary The Engineer position is responsible for specifying and developing the hardware and software associated with the Company's natural gas field instrumentation and controls. The Engineering role is to support the safe, reliable and compliant operation (49 CFR.192) at the We Energies facilities. The Engineer will also be responsible for developing project plans for the installation and maintenance of electronic monitoring associated with the Company's SCADA system and for providing technical support for a number of critical functions at natural gas town border stations and district regulator stations. The Engineer will manage projects that may be cross-functional in nature, complex, involve multiple stakeholders and have a medium to high degree of risk. Plans and conducts work requiring judgment in the independent evaluation, selection and substantial adaptation and modification of standard techniques, procedures and criteria; devises new approaches to problems encountered. Independently performs most assignments with instructions as to the general results expected. Experience with telemetry, remote terminal units (RTUs), instrumentation and programmable logic controllers (PLCs), is desirable. Position will support the entire We Energies service footprint with the primary area of responsibility for this position being in Southeastern Wisconsin. The Engineer position is part of the (Associate Engineer, Engineer, Senior Engineer) job family and experience will be the determining factor. Job Responsibilities Primary responsibilities of the Engineer is to support the management of Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC). Support training field technicians with testing and maintenance of safety systems, process controls, and communications. Support/train field technicians with calibration of transmitters, meters, level sensors etc. Work closely with WEC IT to manage Cyber Security processes and procedures. Support gas control and field technicians in troubleshooting operational issues such as communications, instrumentation and control systems. Support capital and maintenance project planning and execution. Performs predictive and root cause analysis of problems. Determines and initiates corrective action. Applies current methods to monitor and evaluate system performance and equipment condition in order to develop system plans which will minimize life cycle costs, while maintaining reliability, safety, performance and regulatory compliance. Independently evaluates, selects and applies engineering analysis techniques. Exercises judgment in selection and adoption of alternatives which are cost effective, maintain or enhance performance and protect the health and safety of personnel and the public. Has full technical and financial responsibility for planning, developing, organizing, coordinating, and scheduling a wide variety of engineering projects. Responsible for the preparation of specifications and review of bids in support of engineering projects. Responsible for identifying and executing improvement of existing programs, practices, and procedures through continuous process improvement techniques. Interacts with other business units, vendors, regulatory agencies and authorized inspectors to ensure regulatory compliance. Provides technical expertise, leadership, direction and training in various work groups. Applies prioritization, negotiation, conflict management, interpersonal and delegation skills to accomplish goals. Manages and values diversity, while applying the management competencies. Participate on the engineer and supervisor on call list to provide computer support for natural gas field emergencies. Minimum Qualifications Bachelor's Degree in Engineering. Associate Engineer requires 0-2 yrs. relevant engineering experience (internship/co-op experience may be included as relevant engineering). Engineer requires 2-5 years relevant engineering experience. Senior Engineer requires 5+ years relevant engineering experience. Must possess a valid Driver's License and meet the company's requirements for driving. Preferred Qualifications Technical Skills Electrical Engineering and Controls experience. Professional engineering license in the state of Wisconsin is desirable. Experience with Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs) and Telemetry. Experience with pressure, temperature, flow instrumentation and knowledge of AGA gas flow measurement. Knowledge of Control Valves and PID control. Experience with AutoCAD, Rockwell software and/or Emerson ControlWave. Experience in Supervisory Control and Data Acquisition (SCADA). Knowledge of computer systems and the ability to use a variety of office and engineering software is required. Other Experience Preferences Experience in construction and field practices as well as design, operation, maintenance and repair of natural gas distribution facilities. Experience and knowledge in project management, planning, financial budgeting and report writing. Other Requirements The successful candidate must have strong written and oral communication and analytical skills with the ability to lead and direct others. Candidates must be willing to travel to sites and be willing to be called in during off hours if a problem arises. The successful candidate will be required to make themselves available to accept calls and support gas system and field operations after normal business hours.
03/26/2024
Full time
WEC Energy Group is one of the nation's largest electric generation, distribution and natural gas delivery holding companies. We employ over 7,000 people in our energy companies and service subsidiaries. As a Fortune 500 company, we value and develop our employees who are making a difference in a mission that matters. Job Summary The Engineer position is responsible for specifying and developing the hardware and software associated with the Company's natural gas field instrumentation and controls. The Engineering role is to support the safe, reliable and compliant operation (49 CFR.192) at the We Energies facilities. The Engineer will also be responsible for developing project plans for the installation and maintenance of electronic monitoring associated with the Company's SCADA system and for providing technical support for a number of critical functions at natural gas town border stations and district regulator stations. The Engineer will manage projects that may be cross-functional in nature, complex, involve multiple stakeholders and have a medium to high degree of risk. Plans and conducts work requiring judgment in the independent evaluation, selection and substantial adaptation and modification of standard techniques, procedures and criteria; devises new approaches to problems encountered. Independently performs most assignments with instructions as to the general results expected. Experience with telemetry, remote terminal units (RTUs), instrumentation and programmable logic controllers (PLCs), is desirable. Position will support the entire We Energies service footprint with the primary area of responsibility for this position being in Southeastern Wisconsin. The Engineer position is part of the (Associate Engineer, Engineer, Senior Engineer) job family and experience will be the determining factor. Job Responsibilities Primary responsibilities of the Engineer is to support the management of Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC). Support training field technicians with testing and maintenance of safety systems, process controls, and communications. Support/train field technicians with calibration of transmitters, meters, level sensors etc. Work closely with WEC IT to manage Cyber Security processes and procedures. Support gas control and field technicians in troubleshooting operational issues such as communications, instrumentation and control systems. Support capital and maintenance project planning and execution. Performs predictive and root cause analysis of problems. Determines and initiates corrective action. Applies current methods to monitor and evaluate system performance and equipment condition in order to develop system plans which will minimize life cycle costs, while maintaining reliability, safety, performance and regulatory compliance. Independently evaluates, selects and applies engineering analysis techniques. Exercises judgment in selection and adoption of alternatives which are cost effective, maintain or enhance performance and protect the health and safety of personnel and the public. Has full technical and financial responsibility for planning, developing, organizing, coordinating, and scheduling a wide variety of engineering projects. Responsible for the preparation of specifications and review of bids in support of engineering projects. Responsible for identifying and executing improvement of existing programs, practices, and procedures through continuous process improvement techniques. Interacts with other business units, vendors, regulatory agencies and authorized inspectors to ensure regulatory compliance. Provides technical expertise, leadership, direction and training in various work groups. Applies prioritization, negotiation, conflict management, interpersonal and delegation skills to accomplish goals. Manages and values diversity, while applying the management competencies. Participate on the engineer and supervisor on call list to provide computer support for natural gas field emergencies. Minimum Qualifications Bachelor's Degree in Engineering. Associate Engineer requires 0-2 yrs. relevant engineering experience (internship/co-op experience may be included as relevant engineering). Engineer requires 2-5 years relevant engineering experience. Senior Engineer requires 5+ years relevant engineering experience. Must possess a valid Driver's License and meet the company's requirements for driving. Preferred Qualifications Technical Skills Electrical Engineering and Controls experience. Professional engineering license in the state of Wisconsin is desirable. Experience with Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs) and Telemetry. Experience with pressure, temperature, flow instrumentation and knowledge of AGA gas flow measurement. Knowledge of Control Valves and PID control. Experience with AutoCAD, Rockwell software and/or Emerson ControlWave. Experience in Supervisory Control and Data Acquisition (SCADA). Knowledge of computer systems and the ability to use a variety of office and engineering software is required. Other Experience Preferences Experience in construction and field practices as well as design, operation, maintenance and repair of natural gas distribution facilities. Experience and knowledge in project management, planning, financial budgeting and report writing. Other Requirements The successful candidate must have strong written and oral communication and analytical skills with the ability to lead and direct others. Candidates must be willing to travel to sites and be willing to be called in during off hours if a problem arises. The successful candidate will be required to make themselves available to accept calls and support gas system and field operations after normal business hours.
DESCRIPTION Under the general direction of the Code Administration/ Building Official and the Community Development Director, investigates municipal license code violations, and surveys the city for unreported code and ordinance violations. Responds to reports of alleged code violations. Works independently in the field, making decisions requiring the use of technical judgment, discretion and diplomacy. Position requires flexible schedule involving weekend assignments. During occasions of local emergencies, this position shall be required to perform emergency tasks which may result in extended work hours as well as extended periods of time away from family members. This is a professional position responsible for a variety of inspections to ensure compliance to and identification of violations of City codes, ordinances and regulations. The position deals with the public on a daily basis, as well as coordination with other staff members and other City Departments. Work involves active participation in related code enforcement activities and compliance with environmental restrictions. Employee works independently, making decisions requiring the use of technical judgment and discretion. EXAMPLES OF DUTIES Maintains a continuous investigation of all business activities in the city for compliance to proper occupational licensing regulations. Working knowledge of the City's Codes and Ordinances. Investigates and inspects violations and possible violations of municipal license codes and other codes and ordinances. Investigates and inspects construction sites for the proper installation of silt fence for stormwater, dust, mud and trash control in compliance with NPDES regulations. Working knowledge of the Pinellas County Landscape maintenance Best Management Practices. Inspects and make recommendations for all tree removal permits and inspects replants when required. Prepares reports of City code and ordinance violations, and possible violations. Prepares reports of City code and ordinance violations, and possible violations. Inspects possible Building Permit violations. Prepares and submits monthly activity reports as requested. Communicates effectively with the public to assure an understanding of various codes and ordinance regulations. Explains requirements for the codes and regulations, and responds to requests for assistance by the public. On a daily basis, handles citizen complaints regarding code and ordinance violations with efficiency and tact. Investigates and prepares cases of code and ordinance violations for consideration by the city Special Master. Files cases and testifies in cases of code and ordinance violations at meetings of the city Special Master Hearing. Testifies in court as required. Posts meeting notices. Delivers Council/ Board packets as requested. Accesses, inputs and retrieves information from a computer. Interacts with other City Departments as needed. Investigates ordinance violations, prepares and serves violation letters and notices. Documents evidence, prepare reports. Provide affidavits and testimony as required for enforcement proceedings. Provides follow up on enforcement decisions to insure compliance. Performs research related to City Codes and Ordinances, as well as previously approved development plans. Establishes and maintains working relationships with state and county agencies, developers, contractors and general public. Maintains accurate records of inspections activities and violations. Undergoes training and certification in various applications related to code enforcement. Performs other job-related duties as assigned and as necessary and consistent with the position. QUALIFICATIONS Required Skills/Abilities: High school graduation or possession of an accepted equivalency diploma required (GED). Ability to communicate clearly, orally, and in writing. Knowledge of municipal codes and ordinances. Knowledge of municipal license code regulations. Ability to enforce municipal codes and ordinances impartially and with firmness and tact. Ability to handle complaints in a courteous and efficient manner. Ability to work independently and make sound decisions on well established procedures and municipal regulations. Ability to become certified as a Code Enforcement Officer within twelve (12) months from the date of hire. Experience in public safety or law enforcement with zoning experience preferred. Ability to establish and maintain activity files, and prepare reports as requested. Ability to establish and maintain effective working relationships with other employees and the general public. Ability to become a NPDES Certified Stormwater Management Inspector within twelve (12) months of hire date. Ability to become certified in the Pinellas County Landscape management Best Practices within twelve (12) months of hire. Licenses, Certifications or Registrations: Possession of valid Florida Driver's License. Certification as a Level 1 Code Enforcement Officer by the Florida Association of Code Enforcement preferred. Physical Requirements: Ability to communicate, both orally and in writing. Ability to utilize all tools, and equipment necessary in carrying out the functions of this position. Ability to utilize a computer and the related software programs in use by the Department and/or as may be required by the City. Job tasks require walking, lifting and carrying of moderate weights (15 to 45 pounds). Ability to work a flexible schedule, including weekends, and evenings. Working Conditions: Work is performed in both indoor and outdoor conditions. Exposure to heat, cold, dust, fumes, noise, and varying and inclement weather conditions. Occasionally works at heights of up to seventy-five (75) feet.
03/26/2024
Full time
DESCRIPTION Under the general direction of the Code Administration/ Building Official and the Community Development Director, investigates municipal license code violations, and surveys the city for unreported code and ordinance violations. Responds to reports of alleged code violations. Works independently in the field, making decisions requiring the use of technical judgment, discretion and diplomacy. Position requires flexible schedule involving weekend assignments. During occasions of local emergencies, this position shall be required to perform emergency tasks which may result in extended work hours as well as extended periods of time away from family members. This is a professional position responsible for a variety of inspections to ensure compliance to and identification of violations of City codes, ordinances and regulations. The position deals with the public on a daily basis, as well as coordination with other staff members and other City Departments. Work involves active participation in related code enforcement activities and compliance with environmental restrictions. Employee works independently, making decisions requiring the use of technical judgment and discretion. EXAMPLES OF DUTIES Maintains a continuous investigation of all business activities in the city for compliance to proper occupational licensing regulations. Working knowledge of the City's Codes and Ordinances. Investigates and inspects violations and possible violations of municipal license codes and other codes and ordinances. Investigates and inspects construction sites for the proper installation of silt fence for stormwater, dust, mud and trash control in compliance with NPDES regulations. Working knowledge of the Pinellas County Landscape maintenance Best Management Practices. Inspects and make recommendations for all tree removal permits and inspects replants when required. Prepares reports of City code and ordinance violations, and possible violations. Prepares reports of City code and ordinance violations, and possible violations. Inspects possible Building Permit violations. Prepares and submits monthly activity reports as requested. Communicates effectively with the public to assure an understanding of various codes and ordinance regulations. Explains requirements for the codes and regulations, and responds to requests for assistance by the public. On a daily basis, handles citizen complaints regarding code and ordinance violations with efficiency and tact. Investigates and prepares cases of code and ordinance violations for consideration by the city Special Master. Files cases and testifies in cases of code and ordinance violations at meetings of the city Special Master Hearing. Testifies in court as required. Posts meeting notices. Delivers Council/ Board packets as requested. Accesses, inputs and retrieves information from a computer. Interacts with other City Departments as needed. Investigates ordinance violations, prepares and serves violation letters and notices. Documents evidence, prepare reports. Provide affidavits and testimony as required for enforcement proceedings. Provides follow up on enforcement decisions to insure compliance. Performs research related to City Codes and Ordinances, as well as previously approved development plans. Establishes and maintains working relationships with state and county agencies, developers, contractors and general public. Maintains accurate records of inspections activities and violations. Undergoes training and certification in various applications related to code enforcement. Performs other job-related duties as assigned and as necessary and consistent with the position. QUALIFICATIONS Required Skills/Abilities: High school graduation or possession of an accepted equivalency diploma required (GED). Ability to communicate clearly, orally, and in writing. Knowledge of municipal codes and ordinances. Knowledge of municipal license code regulations. Ability to enforce municipal codes and ordinances impartially and with firmness and tact. Ability to handle complaints in a courteous and efficient manner. Ability to work independently and make sound decisions on well established procedures and municipal regulations. Ability to become certified as a Code Enforcement Officer within twelve (12) months from the date of hire. Experience in public safety or law enforcement with zoning experience preferred. Ability to establish and maintain activity files, and prepare reports as requested. Ability to establish and maintain effective working relationships with other employees and the general public. Ability to become a NPDES Certified Stormwater Management Inspector within twelve (12) months of hire date. Ability to become certified in the Pinellas County Landscape management Best Practices within twelve (12) months of hire. Licenses, Certifications or Registrations: Possession of valid Florida Driver's License. Certification as a Level 1 Code Enforcement Officer by the Florida Association of Code Enforcement preferred. Physical Requirements: Ability to communicate, both orally and in writing. Ability to utilize all tools, and equipment necessary in carrying out the functions of this position. Ability to utilize a computer and the related software programs in use by the Department and/or as may be required by the City. Job tasks require walking, lifting and carrying of moderate weights (15 to 45 pounds). Ability to work a flexible schedule, including weekends, and evenings. Working Conditions: Work is performed in both indoor and outdoor conditions. Exposure to heat, cold, dust, fumes, noise, and varying and inclement weather conditions. Occasionally works at heights of up to seventy-five (75) feet.
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. The Structural Field Inspector is also a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment. Bachelor's degree in Structural Engineering preferred; associate degree considered. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages). Working knowledge of construction materials, methods, and processes. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
03/25/2024
Full time
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. The Structural Field Inspector is also a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment. Bachelor's degree in Structural Engineering preferred; associate degree considered. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages). Working knowledge of construction materials, methods, and processes. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
Middough Inc. - 'TOP WORKPLACES' Award Winner Asset Integrity Field Inspector - Position and Responsibilities As an Asset Integrity Field Inspector with Middough, you will be the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found at client locations. The Inspector may also be a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Deploy to field locations to identify and detect deficiencies in structural systems and recommend actions for remediation. For complex deficiencies, coordinate with the engineering department for recommended actions. Rely on past experiences to determine state of a structural element. Prepare daily reports, along with a final report on information retrieved from on-site inspections. Utilize sketches and drawings to depict inspection findings and recommendations for repair. Read site drawings and make changes accordingly based upon inspection results. Keep current of the latest developments in equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support in resolving problems concerning inspection methods and procedures of completing work within the scope and intent of applicable codes and standards. Adhere to all safety policies within a heavy industrial setting. Education, Experience and Skills The successful candidate will possess the following: Technical Associate degree preferred; high school diploma may be considered. 1-5 years of work experience in similar role. Valid state driver's license for current resident state required. Basic knowledge of AutoCAD. Nondestructive testing experience. Familiar with a broad spectrum of construction materials, methods, and processes. Working knowledge of Microsoft Office. Strong analytical, problem-solving, and attention to detail abilities. Ability to multitask and organize for project efficiency. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, use repeating motions that may include the wrists/hands/fingers and talk and hear. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent lifting up to 50 pounds and frequent lifting up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Flexible Start Times Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
03/25/2024
Full time
Middough Inc. - 'TOP WORKPLACES' Award Winner Asset Integrity Field Inspector - Position and Responsibilities As an Asset Integrity Field Inspector with Middough, you will be the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found at client locations. The Inspector may also be a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Deploy to field locations to identify and detect deficiencies in structural systems and recommend actions for remediation. For complex deficiencies, coordinate with the engineering department for recommended actions. Rely on past experiences to determine state of a structural element. Prepare daily reports, along with a final report on information retrieved from on-site inspections. Utilize sketches and drawings to depict inspection findings and recommendations for repair. Read site drawings and make changes accordingly based upon inspection results. Keep current of the latest developments in equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support in resolving problems concerning inspection methods and procedures of completing work within the scope and intent of applicable codes and standards. Adhere to all safety policies within a heavy industrial setting. Education, Experience and Skills The successful candidate will possess the following: Technical Associate degree preferred; high school diploma may be considered. 1-5 years of work experience in similar role. Valid state driver's license for current resident state required. Basic knowledge of AutoCAD. Nondestructive testing experience. Familiar with a broad spectrum of construction materials, methods, and processes. Working knowledge of Microsoft Office. Strong analytical, problem-solving, and attention to detail abilities. Ability to multitask and organize for project efficiency. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, use repeating motions that may include the wrists/hands/fingers and talk and hear. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent lifting up to 50 pounds and frequent lifting up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Flexible Start Times Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
Middough Inc. - 'TOP WORKPLACES' Award Winner! On-Site Structural Field Inspector - Position and Responsibilities As an On-Site Structural Field Inspector with Middough, you will act as the Company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. In this role, you will also monitor construction repairs or installation of structures and modifications resulting from the inspection findings. This position is on-site at the client facility in Middletown, OH. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment required. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages) required. Working knowledge of construction materials, methods, and processes required. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
03/25/2024
Full time
Middough Inc. - 'TOP WORKPLACES' Award Winner! On-Site Structural Field Inspector - Position and Responsibilities As an On-Site Structural Field Inspector with Middough, you will act as the Company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. In this role, you will also monitor construction repairs or installation of structures and modifications resulting from the inspection findings. This position is on-site at the client facility in Middletown, OH. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment required. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages) required. Working knowledge of construction materials, methods, and processes required. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the Company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. In this role, you will also monitor construction repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment required. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages) required. Working knowledge of construction materials, methods, and processes required. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
03/25/2024
Full time
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the Company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. In this role, you will also monitor construction repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment required. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages) required. Working knowledge of construction materials, methods, and processes required. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. The Structural Field Inspector is also a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment. Bachelor's degree in Structural Engineering preferred; associate degree considered. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages). Working knowledge of construction materials, methods, and processes. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
03/25/2024
Full time
Middough Inc. - 'TOP WORKPLACES' Award Winner! Structural Field Inspector - Position and Responsibilities As a Structural Field Inspector with Middough, you will act as the company's field representative and gather documentation of existing conditions for the development of engineered repairs of deficiencies found. The Structural Field Inspector is also a construction monitor during repairs or installation of structures and modifications resulting from the inspection findings. Responsibilities include, but are not limited to, the following: Detect observable defects and/or failures of structural components and recommend noncomplex standard repair recommendations. Prepare daily reports on information retrieved from on-site inspections. Read site drawings and make changes accordingly based upon inspection results. Know and understand the current equipment inspection standards, codes, practices, procedures, methods, inspection equipment, as applicable. Provide technical support and problem-solving skills around inspection methods and procedures to complete work within scope and intent of applicable codes and standards. Education, Experience and Skills The successful candidate will possess the following: 5+ years of experience in a heavy industry environment. Bachelor's degree in Structural Engineering preferred; associate degree considered. High School diploma required. Basic knowledge of AutoCAD required. AMPP (Association for Materials Protection and Performance), NACE (National Association of Corrosion Engineers), AWS (American Welding Society), API (American Petroleum Institute) Certifications and/or Nondestructive testing experience preferred. Knowledge of and work experience using measuring instruments (such as tape measures, calipers, micrometers, and height gages). Working knowledge of construction materials, methods, and processes. Working knowledge of Microsoft Office. Ability to multi-task and be highly organized for effective project planning. Strong analytical and problem-solving skills. Strong interpersonal and communication skills. Physical Requirements The characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of this position, the successful candidate will: Frequently walk up to and more than 10,000 steps per day, reach with hands and arms, climb several flights of stairs per day, ladder ascending and descending, balance, stoop or kneel, bend/twist, and use repeating motions that may include the wrists/hands/fingers. Must have the ability to hear and speak at all times. Subject to confined space entries and non-confined space work requiring bending, reaching, climbing with inspection tools, harnesses, and lanyards. Frequent use of hand tools including but not limited to hammers, wire brushes, tape measures, etc. Infrequent ability to move up to 50 pounds and frequent ability to move up to 10 pounds. Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus. Should not expect adverse environmental conditions within company offices. May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed. May require occasional car or air travel to other company locations or client sites. This position requires the candidate/employee to possess and maintain a valid driver's license in their state of residence. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: A hybrid work model for work-life flexibility (based on business and client needs) Medical, Dental, and Vision coverage Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance Health Saving and Flexible Spending Accounts 401(k) Plan Paid Time Off, Company Paid Holidays Tuition Assistance Paid Certifications and Registrations (as applicable) Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.
On-Board Services is hiring a Construction Inspector in Savannah, GA! General Description: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience. Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects. General Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience preferred. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history Preferred Certifications or Able to Obtain with Prior Experience (2 years or more) • Successful completion of related internal safety certifications. • At least one or more certifications in the following areas: • NICET Level II certification in Construction Materials Testing (Asphalt, Concrete, Soils). • NICET Level II certification in Geotechnical (Construction, Laboratory, Exploration, Generalist) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Welding Society (AWS) Certified Welding Inspector (CWI) • Roadway Transportation Technician (GDOT Certification or Equivalent) • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . • Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. • ACI certification in one or more of the following areas: • Concrete Field Testing Technician Grade I • Concrete Strength Testing Technician ACI certification not required if AWS CWI, ASNT Level II, VT, MT, PT, RT or UT certification(s) have been obtained and concrete field and laboratory testing is not required as part of the job level description. • Certified in radiation safety and Nuclear Density Gauge operation . Nuclear Density Gauge operation certification not required if AWS CWI, ASNT Level II, VT, MT, PT, RT or UT certification(s) have been obtained and soils testing is not required as part of the job level description. Work Environment & Physical Requirements: • The work environment characteristics and physical demands described here are representative of those the employee encounters and must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Position typically works outside in field locations in varying weather conditions, hearing heavy operating equipment, in operating facilities, and adjacent to traffic ways. May encounter need to work at heights on fixed & portable ladders, work in confined/tight areas, exposure to hostile flora and fauna, and noise level will typically be moderate. • Work requires the use personal protective equipment (PPE) including but not limited to hard hats, safety-toe boots, safety glasses, hearing protection equipment, respiratory protection, and appropriate clothing. • While performing the duties of this job, the employee is required to regularly stand, walk, stoop, or kneel, crouch, or crawl; use hands to manipulate, handle or feel; reach with hands and arms; climb or balance; and talk and hearing. The employee must regularly lift and/or move up to 30 pounds (e.g. lifting and operating testing equipment, obtaining and carrying material samples). Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. • May be subject to one or more of the following: Hazmat and respiratory medical monitoring. • May require overnight travel in support of projects in varying locations JobDiva # 24-00700
03/25/2024
Full time
On-Board Services is hiring a Construction Inspector in Savannah, GA! General Description: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience. Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects. General Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience preferred. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history Preferred Certifications or Able to Obtain with Prior Experience (2 years or more) • Successful completion of related internal safety certifications. • At least one or more certifications in the following areas: • NICET Level II certification in Construction Materials Testing (Asphalt, Concrete, Soils). • NICET Level II certification in Geotechnical (Construction, Laboratory, Exploration, Generalist) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Welding Society (AWS) Certified Welding Inspector (CWI) • Roadway Transportation Technician (GDOT Certification or Equivalent) • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . • Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. • ACI certification in one or more of the following areas: • Concrete Field Testing Technician Grade I • Concrete Strength Testing Technician ACI certification not required if AWS CWI, ASNT Level II, VT, MT, PT, RT or UT certification(s) have been obtained and concrete field and laboratory testing is not required as part of the job level description. • Certified in radiation safety and Nuclear Density Gauge operation . Nuclear Density Gauge operation certification not required if AWS CWI, ASNT Level II, VT, MT, PT, RT or UT certification(s) have been obtained and soils testing is not required as part of the job level description. Work Environment & Physical Requirements: • The work environment characteristics and physical demands described here are representative of those the employee encounters and must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Position typically works outside in field locations in varying weather conditions, hearing heavy operating equipment, in operating facilities, and adjacent to traffic ways. May encounter need to work at heights on fixed & portable ladders, work in confined/tight areas, exposure to hostile flora and fauna, and noise level will typically be moderate. • Work requires the use personal protective equipment (PPE) including but not limited to hard hats, safety-toe boots, safety glasses, hearing protection equipment, respiratory protection, and appropriate clothing. • While performing the duties of this job, the employee is required to regularly stand, walk, stoop, or kneel, crouch, or crawl; use hands to manipulate, handle or feel; reach with hands and arms; climb or balance; and talk and hearing. The employee must regularly lift and/or move up to 30 pounds (e.g. lifting and operating testing equipment, obtaining and carrying material samples). Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. • May be subject to one or more of the following: Hazmat and respiratory medical monitoring. • May require overnight travel in support of projects in varying locations JobDiva # 24-00700
On-Board Services is hiring a Certified Welding Inspector (CWI) in Wilimington, NC! Position Details: Position Type: Full Time / Contract-to-Hire Job Location: Wilmington, NC Benefits: 401K, Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More Compensation : $28.00 - $35.00/hr (based on experience) In addition to great hourly pay, benefits, Paid Training for certifications, as well as cell phone reimbursement. Company Profile: About this opportunity Our client is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 6,000 curious minds focused on solving engineering and technical challenges from more than 175 locations nationwide. Based on eligibility, role and job status, they offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to Senior CWI or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures to determine if work is done according to contract specifications. Read and interpret construction drawings and specifications. Provides clear documentation of findings and results. Prepare inspection reports and document nonconformance daily. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the Project Manager. Interact with client and other site personnel to provide input on appropriate resolution of findings. May assist Project Manager in development of scope for testing and inspection services Maintains equipment operation and calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects Requirements : High school diploma or equivalent. Minimum 2-4 years' experience in construction inspection. Valid driver's license with acceptable violation history. Required Certifications: At least one or more certifications in the following areas: American Welding Society (AWS) Certified Welding Inspector (CWI) American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . ICC certification (Structural Steel - Bolting, Structural Steel - Welding). Apply Today! On-Board was founded in 1976 by Robert L. Wilson to provide Engineering and Design services to the chemical manufacturing industry. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America. The On-Board Family of Companies conducts operations through its Corporate Headquarters located in East Windsor, NJ along with Regional Offices in New Castle, DE and Wake Forest, NC. On-Board's Mission is to provide "Flexible Service by applying the talents of our people, work processes and technology to meet our clients' expectations in a Safe, Responsible and Dependable manner." On-Board Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, national origin, age, disability or genetics. 24-00569 INDE
03/25/2024
Full time
On-Board Services is hiring a Certified Welding Inspector (CWI) in Wilimington, NC! Position Details: Position Type: Full Time / Contract-to-Hire Job Location: Wilmington, NC Benefits: 401K, Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More Compensation : $28.00 - $35.00/hr (based on experience) In addition to great hourly pay, benefits, Paid Training for certifications, as well as cell phone reimbursement. Company Profile: About this opportunity Our client is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 6,000 curious minds focused on solving engineering and technical challenges from more than 175 locations nationwide. Based on eligibility, role and job status, they offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to Senior CWI or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures to determine if work is done according to contract specifications. Read and interpret construction drawings and specifications. Provides clear documentation of findings and results. Prepare inspection reports and document nonconformance daily. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the Project Manager. Interact with client and other site personnel to provide input on appropriate resolution of findings. May assist Project Manager in development of scope for testing and inspection services Maintains equipment operation and calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects Requirements : High school diploma or equivalent. Minimum 2-4 years' experience in construction inspection. Valid driver's license with acceptable violation history. Required Certifications: At least one or more certifications in the following areas: American Welding Society (AWS) Certified Welding Inspector (CWI) American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . ICC certification (Structural Steel - Bolting, Structural Steel - Welding). Apply Today! On-Board was founded in 1976 by Robert L. Wilson to provide Engineering and Design services to the chemical manufacturing industry. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America. The On-Board Family of Companies conducts operations through its Corporate Headquarters located in East Windsor, NJ along with Regional Offices in New Castle, DE and Wake Forest, NC. On-Board's Mission is to provide "Flexible Service by applying the talents of our people, work processes and technology to meet our clients' expectations in a Safe, Responsible and Dependable manner." On-Board Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, national origin, age, disability or genetics. 24-00569 INDE
On-Board Services is hiring a CWI in Savannah, GA! Position Details: Position Type: Full Time Direct Hire Job Location: Savannah, GA Benefits: 401K , Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Maintains equipment and calibration. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history. Required Certification: • Successful completion of related internal safety certifications. At least one or more certifications in the following areas: • American Welding Society (AWS) Certified Welding Inspector (CWI) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . JobDiva # 24-00447
03/25/2024
Full time
On-Board Services is hiring a CWI in Savannah, GA! Position Details: Position Type: Full Time Direct Hire Job Location: Savannah, GA Benefits: 401K , Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Maintains equipment and calibration. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history. Required Certification: • Successful completion of related internal safety certifications. At least one or more certifications in the following areas: • American Welding Society (AWS) Certified Welding Inspector (CWI) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . JobDiva # 24-00447
On-Board Services is hiring a CWI in Raleigh, NC! Position Details: Position Type: Full Time Direct Hire Job Location: Raleigh, NC Benefits: 401K , Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Maintains equipment and calibration. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history. Required Certification: • Successful completion of related internal safety certifications. At least one or more certifications in the following areas: • American Welding Society (AWS) Certified Welding Inspector (CWI) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . JobDiva # 24-00446
03/25/2024
Full time
On-Board Services is hiring a CWI in Raleigh, NC! Position Details: Position Type: Full Time Direct Hire Job Location: Raleigh, NC Benefits: 401K , Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, and More General Responsibilities: Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing of materials. Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards. Essential Roles and Responsibilities: • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. • Read and interpret construction drawings and specifications. • Provides clear documentation of findings and results. • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. • Communicates information to Project Manager and other personnel as directed by the Project Manager. • Draft inspection reports for review by senior inspector and/or Project Managers. • May assist more senior inspectors on projects. • Maintains equipment and calibration. • Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. • Be responsible for maintaining quality standards on all projects Requirements: • High school diploma or equivalent. • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred. • Minimum 2-4 years' experience as an Engineering Technician or other applicable experience. • 1 year experience in construction inspection preferred. • Valid driver's license with acceptable violation history. Required Certification: • Successful completion of related internal safety certifications. At least one or more certifications in the following areas: • American Welding Society (AWS) Certified Welding Inspector (CWI) • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding). • American Society for Nondestructive Testing (ASNT) Level II certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT . JobDiva # 24-00446
The Project Quality Engineer is the Quality focal point to the Project Leadership Team (PLT) and provides assurance that Quality risks are effectively managed through quality planning, assurance, control, and continuous improvement. This position requires collaborative relationships both internally and externally, rooted in the principle of partnership and simplification with our Contractors/Suppliers, towards the desired outcome of delivering safe, reliable, and competitive Deepwater projects. The position will also define and develop an integrated Quality Management program to help achieve No Defects on projects and align with the requirements from perspectives of both industry and Company standards. Accountabilities Demonstrate a commitment to HSSE (Health Safety Security and Environment). Ensure that contractors/suppliers/inspectors also demonstrate appropriate HSSE behaviors. Embrace and embed the Projects and Engineering Identity and CT2025 aspirations. Drive innovation and new ways of working to achieve CT2025 with a relentless focus on outcomes. Implementation of risk-based Project Quality Management Plan. Utilize Quality Discipline Delivery Plan and PMF to identify quality deliverables applicable to each ORS phase. Implement Quality plans, processes, and assurance activities for project execution. Provide input on Quality requirements in contracts and tendering process, including assessment and evaluation of Contractors/Suppliers. Prepare Contractors/Supplier Qualification and evaluation criteria to assess capabilities during Invitation to Tender (ITT) phase and review Contractors/Suppliers deliverables against requirements. Implementation of audit and review programs, including audit execution and monitoring close-out of audit findings. Implement requirements management program and audits for compliance. Audit contractor's quality management system, processes, and procedures for effectiveness. Assist Project in implementing DCAF and PCAP in compliance with PMF requirements; interface with project team, TAs, and document control, as well as monitor KPI (% complete), and implement best practices at the Portfolio level. Coordinate inspection services for third party verification, results, and reporting. Provide input into Contractor's equipment criticality levels, identify intervention points, contribute to inspection and test plan per portfolio level and project's contract/PO requirements. Implement improvements to Quality Control of key contractors. Participate in Quality incident and failure investigations (Root Cause Analysis/causal learning). Utilize internal database for capturing and management of NCRs (Non-Conformance Reports), observations, and inspection reports Prepare quality alerts and disseminate to the Quality networks and project communities. Facilitate Lessons Learned implementation and capture sessions with project teams and share with the wider community. Manage interfaces and issues among stakeholders. Dimensions Fabrication assurance - verification of processes, understanding of manufacturing / fabrication risks, types of inspection activities/level and criticality, types of NDE, preservation, cleanliness, and tightness methods. Qualifications and Competency - addressing certification and competency requirements of third-party inspector candidates, Contractors/Suppliers key personnel, and ensuring certifications are up to date. Auditing and Assessments - internal and external compliance to project and regulatory requirements, policies, procedures, organization, safety, and review systems for effectiveness. Resource Planning - identifying responsibilities and resource needs. Methods of analysis - compiling relevant project data to provide clear and concise status of project performance, identifying new risks and learnings; analyze and identify trends for company and industry; develop and implement mitigations. Effectively communicate with multiple Project and Portfolio stakeholders including Project Managers, Quality Leads and Quality Engineers, C&P (Contracting & Procurement), Package Leads/Contract Holders, Project Engineers, Inspection Coordinator, PCAP Coordinator, SMEs (Subject Matter Expert), EFA (Enterprise Framework Agreement) Suppliers Coordinators/Project Managers, Suppliers/Contractors engineering and quality. Skills & Requirements The qualifications for this position are a combination of the necessary skills, project execution experience, a network of diverse stakeholder relationships, and general understanding of Deepwater and Upstream business objectives. Strong management and leadership skills. Bachelor's degree required, Master's degree (preferred). 15+ years' experience associated with quality, project delivery, or discipline engineering (preferably in the Oil & Gas industry) 10+ years' experience with quality management systems, activities, and deliverables for EPC (Engineering Procurement Construction) projects. Lead auditor certification from an internationally recognized body and experience conducting internal and external quality management systems, ISO and compliance audits. ISO 9001 Quality Management System Standard expertise. Understanding of Six Sigma process. Proficient in interpreting contract scope of work and ability to provide contract quality language for ITT and contract and address clarifications. Ability to provide input to contractor's quality audit schedule/plan based on risks. Ability to execute verification activities against requirements internally or externally with EPC or Supplier. Experience with management of contractors and vendors throughout procurement, fabrication of equipment, construction, installation, and commissioning. Ability to interface and effectively communicate amongst internal and external stakeholders at all levels of the organization Experience with project completions and documentation for Statement of Fitness and P2A operations handover. Proficient in reviewing third-party inspection reports and nonconformances. Experience with the overall DCAF process (PCAP)/requirements of various ORS within projects. Expertise in capturing, vetting, and implementing lessons learned. Ability to identify gaps and mitigate risks within Contractors/Supplier's quality documents. Additional Information Houston, TX 77079 Start immediately 2 - 3 year assignment Contractor (1099) position
03/25/2024
Contractor
The Project Quality Engineer is the Quality focal point to the Project Leadership Team (PLT) and provides assurance that Quality risks are effectively managed through quality planning, assurance, control, and continuous improvement. This position requires collaborative relationships both internally and externally, rooted in the principle of partnership and simplification with our Contractors/Suppliers, towards the desired outcome of delivering safe, reliable, and competitive Deepwater projects. The position will also define and develop an integrated Quality Management program to help achieve No Defects on projects and align with the requirements from perspectives of both industry and Company standards. Accountabilities Demonstrate a commitment to HSSE (Health Safety Security and Environment). Ensure that contractors/suppliers/inspectors also demonstrate appropriate HSSE behaviors. Embrace and embed the Projects and Engineering Identity and CT2025 aspirations. Drive innovation and new ways of working to achieve CT2025 with a relentless focus on outcomes. Implementation of risk-based Project Quality Management Plan. Utilize Quality Discipline Delivery Plan and PMF to identify quality deliverables applicable to each ORS phase. Implement Quality plans, processes, and assurance activities for project execution. Provide input on Quality requirements in contracts and tendering process, including assessment and evaluation of Contractors/Suppliers. Prepare Contractors/Supplier Qualification and evaluation criteria to assess capabilities during Invitation to Tender (ITT) phase and review Contractors/Suppliers deliverables against requirements. Implementation of audit and review programs, including audit execution and monitoring close-out of audit findings. Implement requirements management program and audits for compliance. Audit contractor's quality management system, processes, and procedures for effectiveness. Assist Project in implementing DCAF and PCAP in compliance with PMF requirements; interface with project team, TAs, and document control, as well as monitor KPI (% complete), and implement best practices at the Portfolio level. Coordinate inspection services for third party verification, results, and reporting. Provide input into Contractor's equipment criticality levels, identify intervention points, contribute to inspection and test plan per portfolio level and project's contract/PO requirements. Implement improvements to Quality Control of key contractors. Participate in Quality incident and failure investigations (Root Cause Analysis/causal learning). Utilize internal database for capturing and management of NCRs (Non-Conformance Reports), observations, and inspection reports Prepare quality alerts and disseminate to the Quality networks and project communities. Facilitate Lessons Learned implementation and capture sessions with project teams and share with the wider community. Manage interfaces and issues among stakeholders. Dimensions Fabrication assurance - verification of processes, understanding of manufacturing / fabrication risks, types of inspection activities/level and criticality, types of NDE, preservation, cleanliness, and tightness methods. Qualifications and Competency - addressing certification and competency requirements of third-party inspector candidates, Contractors/Suppliers key personnel, and ensuring certifications are up to date. Auditing and Assessments - internal and external compliance to project and regulatory requirements, policies, procedures, organization, safety, and review systems for effectiveness. Resource Planning - identifying responsibilities and resource needs. Methods of analysis - compiling relevant project data to provide clear and concise status of project performance, identifying new risks and learnings; analyze and identify trends for company and industry; develop and implement mitigations. Effectively communicate with multiple Project and Portfolio stakeholders including Project Managers, Quality Leads and Quality Engineers, C&P (Contracting & Procurement), Package Leads/Contract Holders, Project Engineers, Inspection Coordinator, PCAP Coordinator, SMEs (Subject Matter Expert), EFA (Enterprise Framework Agreement) Suppliers Coordinators/Project Managers, Suppliers/Contractors engineering and quality. Skills & Requirements The qualifications for this position are a combination of the necessary skills, project execution experience, a network of diverse stakeholder relationships, and general understanding of Deepwater and Upstream business objectives. Strong management and leadership skills. Bachelor's degree required, Master's degree (preferred). 15+ years' experience associated with quality, project delivery, or discipline engineering (preferably in the Oil & Gas industry) 10+ years' experience with quality management systems, activities, and deliverables for EPC (Engineering Procurement Construction) projects. Lead auditor certification from an internationally recognized body and experience conducting internal and external quality management systems, ISO and compliance audits. ISO 9001 Quality Management System Standard expertise. Understanding of Six Sigma process. Proficient in interpreting contract scope of work and ability to provide contract quality language for ITT and contract and address clarifications. Ability to provide input to contractor's quality audit schedule/plan based on risks. Ability to execute verification activities against requirements internally or externally with EPC or Supplier. Experience with management of contractors and vendors throughout procurement, fabrication of equipment, construction, installation, and commissioning. Ability to interface and effectively communicate amongst internal and external stakeholders at all levels of the organization Experience with project completions and documentation for Statement of Fitness and P2A operations handover. Proficient in reviewing third-party inspection reports and nonconformances. Experience with the overall DCAF process (PCAP)/requirements of various ORS within projects. Expertise in capturing, vetting, and implementing lessons learned. Ability to identify gaps and mitigate risks within Contractors/Supplier's quality documents. Additional Information Houston, TX 77079 Start immediately 2 - 3 year assignment Contractor (1099) position