10 jobs found

QAI JOB NUMBER: QAI-ELEMC- JOB TITLE: Technician I NUMBER OF POSITIONS: 1 LOCATION: Middleburg Heights, Ohio DEPARTMENT: ELE & EMC BACKGROUND: Founded in 1995 by a group of experienced certifications and testing experts, QAI Laboratories Ltd. (QAI) is a multi-national professional certification body, test laboratory, and inspection agency with offices throughout North America and Asia. Recognition of the QAI name and logo have grown significantly over the past few years resulting in significant expansion of the business. At QAI, we live and breathe our mission statement: to provide reliable conformity assessments and market access while maintaining the trust of society. We're always striving to be the go-to source for conformity assessments through our commitment to knowledge, excellent service, and continual development, as stated in our vision statement. QAI has an exciting career opportunity within the testing department . We are currently seeking an experienced Technician to support the ELE and EMC Department at our Middleburg Heights, Ohio location. This role involves Electrical Product Safety and Electromagnetic Compatibility (EMC) testing, supporting compliance evaluations, data analysis, and reporting for a wide range of products to ensure they meet regulatory and safety standards. DUTIES : The successful candidate will perform, but not be limited to, the following duties: ELE Read, understand, organize, and execute testing programs for a variety of different material and assembly evaluations. Have the ability to read and interpret various electrical safety standards (CSA, UL, IEC, etc.).Liaison with QAI account managers and clients to ensure appropriate testing and timelines to meet client expectations and goals. Work independently to ensure completion of testing, reporting and certification programs. Observe QAI Quality Management Systems and best work practices. Present professional and friendly work environment for QAI clients and fellow staff. General lab duties including clean up, organizing, material procurement as required. Lab equipment maintenance and construction of test fixtures.Duties as assigned by management. EMC Perform testing of equipment to recognized standardsRecord and analyze test dataUnderstand technical result from relevant equipment (such as spectrum analyzers, oscilloscopes, signal generators, radio frequency amplifiers, chart recorders etc.)Write concise and accurate test reports:Interpret technical instructions and log sheets including maintaining a log of reports and update management of project status as neededEnter test data using Microsoft Office and other programs.Write clear and concise language that is responsive to requirements.Interact effectively with clients and staffWork with Program Managers to incorporate customer editsWork collaboratively with engineers and other subject matters expert to understand the operation and application of all products and services that are being documentedMaintain test equipment and track calibration recordsEnsure work complies with the QAI quality systemOther duties as assigned by the manager or its designee QUALIFICATIONS : The successful candidate will: Minimum Have a technician / trade school diploma / two or more years degree or equivalent directly related experience. Possess the ability to read, understand, and apply technical Electrical Safety & EMC standards towards product testing programsPossess "Good Laboratory Practice" skills essential for testing products.Possess strong analytical skillsPossess good interpersonal and communication skills, both written and oralPossess ability to work effectively within the team while under tight deadlines Possess superior MS Word and Excel skills and be proficient with email correspondence KEY TECHNICAL COMPETENCE: Accepts instruction and follows it for testing outside of their general scope of knowledge and experience.Able to grasp general concepts in a field of testing and apply it to specific test methods.Able to perform testing and as knowledge grows in a specific field of testing graduates to more complex testing methods.Seeks assistance and knowledge from more senior personnel when a specific requirement is outside of their general scope ofknowledge.Good working knowledge of the test methods in their specific discipline.Able to multi-task with some degree of efficiency and accuracy.Maintains a sense of ownership and responsibility for projects assigned to them. ADDITIONAL INFORMATION: Candidates must hold a valid driver's license (willingness to travel as needed). Candidates must be open to working extended hours during peak service demands. Join our Team! Learn, Develop, Grow! At QAI, you will have the opportunity to put your aptitude, experience, knowledge, and desire to learn to the test. We make a difference in people's lives through the work we do as a top-notch Product Testing, Certification, and Inspection body whilst providing rewarding careers for our employees. Equal Opportunity Employer QAI Laboratories is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. NOTE : No sponsorship is available. PI030cc654f5ec-2432

Job Purpose: We are seeking a hands-on Semiconductor Packaging Engineer to work for a High-Tech Semiconductor Manufacturer in the Tucson, Area. The Semiconductor Packaging Engineer will ensure stable, robust, repeatable, sustainable and high-yielding manufacturing processes and products are achieved, monitored and maintained and will help to implement a new MES system. Process development and optimize physical packaging. Developing and improving manufacturing processes for packaging, including wafer-level and chip-level assembly, and bonding. Responsibilities include development, continuous improvement, and sustaining processes all in close partnership with Device and Integration Engineering as well as design teams. You will be expected to clearly communicate goals, roles, and responsibilities, engage and motivate engineering talent, define and set deliverables, plan resources, and achieve desired results. You will be expected to contribute technically, maintain an optimistic, can-do approach, and present status to executive level management. Excellent judgment, expertise in semiconductor processing, and leadership are essential to success in this role. The position reports to the Process Engineering Manager. Will monitor and control of the process. Improve the process or introduce new process and tools to improve yield, capacity and quality. Work with engineering team to develop new products. Work with engineering team to transfer new products or new process to production and will help to implement a new MES system. Position responsibilities include daily oversight of manufacturing operations, continuous improvement of operational processes including scheduling and executing production for Back End Assembly Process. Conducts studies in operations to optimize workflow and space utilization. Ensures facility efficiency and workplace safety. Responsibilities: Manufacturing monitoring and improvements with SPC. Creating weekly yield reports using statistical tools. Creating and maintaining work standards using work measurement, and dynamic and static capacity and cost simulation models. Workflow optimization through creating and implementing in-process kanbans models. Working with materials manager for supply chain optimization and inventory minimization through creating and implementing raw material kanbans. Design of Experiments (DOE) and data analysis to support engineering efforts to improve product design and manufacturability. Performance measurement and analysis to monitor and improve manufacturing. Applying various statistical methods to improve reproducibility and manufacturability through Failure Mode Effect Analysis (FMEA) , Control Plan and Gage R&R studies. Data analysis and improvements to manufacturing capabilities. Work with information technology department to improve database structures and collection methods to improve manufacturing. Cost and net worth analysis to evaluate capital expenditures for expansion scenarios. Maximize space utilization through layout evaluation, design, and improvements, using design software such as AutoCAD, Draftsight. Duties: Develop and maintain positive working relationships with applicable departments and suppliers to evaluate potential new processes and materials to improve cost, yield, reliability and quality. Drive identification and implementation of process improvements to increase yield and reduce operating costs. Identify new hardware requirements to meet the developing process/customer needs. Ensure these requirements are addressed appropriately with regard to specifications, budget constraints, supplier identification and thorough evaluation. Develop, modify and/or continuously improve manufacturing process and procedures to enable higher productivity, reduced scrap, and improved quality. Skills/Qualifications: Must have a B.S. or M.S. Electrical or Mechanical Engineering or a related field. Must have knowledge of process Assembly of semiconductor lasers. Communication and managing skills are required. Clean room manufacturing environment, experience working in cleanrooms and labs. Exposure to medium to long term projects. 3+ years of experience within the semiconductor industry (die bonding, oven, wire bonding, lead frame design, SMT, reflowing, among other processes). New Product Introduction. Strong verbal, written, presentation, analytical and interpersonal skills. Leadership capabilities to drive and deliver results through motivating cross-cultural teams. Highly proficient in Excel, Word, Powerpoint and statistical software. Strong analytical and problem solving ability. Appreciation of both practical and theoretical methodologies. Experienced in equipment selection, commissioning and process set-up. Knowledge of troubleshooting guides, working documentation, safety. Knowledge of quality systems and reliability assessment. Strong SPC and DOE skill set and experience. Experience with Lean and 5S programs. Experience with Six Sigma. Demonstrated success in project management. Detailed working knowledge of semiconductor wafer fabrication processes, including wet and dry etching, thin films, moderate scale photolithography. Proven track record in program management and technical team leadership. Self-motivated with the ability to work both independently and in a team environment This position is located in the United States and will require use of information which is subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Leonardo is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law. NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Here are the hiring process steps and what you can expect from us: Step 1: Application Review: Upon submitting your application, it is made available to the recruitment team to review and ensure you meet the basic qualifications. Step 2: Interview: If you have been identified to move forward in the process, you may be invited to participate in a one-on-one or panel interview. The interview format can be a phone call, in-person, or virtual meeting. Step 3: Offer: If you reach this stage of the interview process, congratulations! You will be provided an offer to join the Leonardo Electronics US Inc. team. The offer will include details about your salary, benefits package and start date. PI6252fa05f5-

Electrical Project Engineer - Youngstown, Ohio - Job 25-01359 Salary: $75K - $120K Permanent Position with Benefits Youngstown, Ohio manufacturer is seeking to hire an experienced Electrical Project Engineer to schedule, plan, forecast, resource, and manage technical project accuracy and quality from conception to completion. REQUIREMENTS: Bachelor Degree / BSEE (or Associate Degree with 10+ years applicable engineering work experience) 3+ years' experience electrical equipment manufacturing designing electrical engineering circuits, and systems Strong understanding of NEC, UL, IEC, and IEEE Work experience using AutoCAD, EPLAN, and electrical design tools Design Electrical/Control Systems, Create detailed electrical schematics, diagrams, and layouts for power distribution, control systems, and equipment. Designs include electrical control circuits, bus bar system, Component Selection: Select components as required and generate project Bill of Materials (BOM). Knowledge of SWBD (switch panels, overcurrent protection devices), MCC, Panelboard, VFD control, ATS, industrial control panels, relays, power supplies, transformers, HVAC, etc. Build and test prototypes of electrical systems and engineered products to validate design concepts and performance Conduct thorough testing, analysis, and troubleshooting to identify and resolve any issues or inefficiencies. Conduct thorough testing and evaluation of products for performance, reliability, and compatibility Project Planning and Coordination: Collaborate with project management and product teams to determine electrical requirements and specifications. Coordinate with other engineers and stakeholders to verify electrical systems and overall project design accuracy Open to 20% travel Candidates are required to pass a Criminal Background Check and a 10 Panel Drug Screen. Only U.S. Citizens or persons with a Green Card work permit may apply. Due to the large amount of resumes we expect to receive only the most qualified candidates will be contacted. We will retain all other resumes for any future job considerations. Integrity Technical Services, Inc. 14 Whitehall Drive Suite 102 Akron, Ohio 44278 Toll Free: 1- Akron: Cleveland: Website: (To view all of our open positions please visit our website) Integrity Technical Services, Inc. does not charge a fee for finding anyone a job. Integrity Technical Services is an Equal Opportunity Employer.

Position Summary: The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Responsible for project completion in accordance with qualify assurance policies, standards and project specifications Prepare and review engineering plans and drawings Assist in the preparation of project proposals, cost estimates, and feasibility studies Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion Performs and/or directs design computations by hand and by computer software Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Perform quality control reviews at appropriate milestones Mentors, trains and develops less experienced staff Participates in business development activities to include developing and maintaining relationships with clients Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others, with minimal supervision. Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation Familiarity with local regulations, permitting processes, and design standards Excellent oral, written, and interpersonal communication skills. Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu RISA/RAM Enercalc Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing Structural Design & Calculations for Buildings Load Path Analysis Lateral Analysis - Seismic and Wind Load Lateral force-resisting systems Structural Elements Design (beams, columns, joists, slabs, walls, and foundations) Structural Materials (Steel, Concrete, Masonry, Wood) Storm Shelters Deep Foundation Systems Precision Equipment/Machine Foundations Pre-Engineered Metal Building Foundations Building Condition Assessments Structural Repair/Retrofit of Existing Buildings Education and Experience: Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required. Minimum four (4) years of experience in engineering. License and Certification: Professional Engineering (PE) license in the location of practice is required. Summary of Benefits Medical Dental Vision 401K Matching Life Insurance Short- and Long-Term Disability Maternity Leave Identity Theft Insurance Cancer Insurance Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A) : N/A PEC is an AA/EEO/Veteran/Disabled employer. PM21 PI06c2e3ef218d-4826

Position Summary: The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Responsible for project completion in accordance with qualify assurance policies, standards and project specifications Prepare and review engineering plans and drawings Assist in the preparation of project proposals, cost estimates, and feasibility studies Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion Performs and/or directs design computations by hand and by computer software Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Perform quality control reviews at appropriate milestones Mentors, trains and develops less experienced staff Participates in business development activities to include developing and maintaining relationships with clients Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others, with minimal supervision. Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation Familiarity with local regulations, permitting processes, and design standards Excellent oral, written, and interpersonal communication skills. Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu RISA/RAM Enercalc Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing Structural Design & Calculations for Buildings Load Path Analysis Lateral Analysis - Seismic and Wind Load Lateral force-resisting systems Structural Elements Design (beams, columns, joists, slabs, walls, and foundations) Structural Materials (Steel, Concrete, Masonry, Wood) Storm Shelters Deep Foundation Systems Precision Equipment/Machine Foundations Pre-Engineered Metal Building Foundations Building Condition Assessments Structural Repair/Retrofit of Existing Buildings Education and Experience: Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required. Minimum four (4) years of experience in engineering. License and Certification: Professional Engineering (PE) license in the location of practice is required. Summary of Benefits Medical Dental Vision 401K Matching Life Insurance Short- and Long-Term Disability Maternity Leave Identity Theft Insurance Cancer Insurance Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A) : N/A PEC is an AA/EEO/Veteran/Disabled employer. PM21 PIa1f5-

Position Summary: The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Responsible for project completion in accordance with qualify assurance policies, standards and project specifications Prepare and review engineering plans and drawings Assist in the preparation of project proposals, cost estimates, and feasibility studies Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion Performs and/or directs design computations by hand and by computer software Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Perform quality control reviews at appropriate milestones Mentors, trains and develops less experienced staff Participates in business development activities to include developing and maintaining relationships with clients Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others, with minimal supervision. Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation Familiarity with local regulations, permitting processes, and design standards Excellent oral, written, and interpersonal communication skills. Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu RISA/RAM Enercalc Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing Structural Design & Calculations for Buildings Load Path Analysis Lateral Analysis - Seismic and Wind Load Lateral force-resisting systems Structural Elements Design (beams, columns, joists, slabs, walls, and foundations) Structural Materials (Steel, Concrete, Masonry, Wood) Storm Shelters Deep Foundation Systems Precision Equipment/Machine Foundations Pre-Engineered Metal Building Foundations Building Condition Assessments Structural Repair/Retrofit of Existing Buildings Education and Experience: Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required. Minimum four (4) years of experience in engineering. License and Certification: Professional Engineering (PE) license in the location of practice is required. Summary of Benefits Medical Dental Vision 401K Matching Life Insurance Short- and Long-Term Disability Maternity Leave Identity Theft Insurance Cancer Insurance Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A) : N/A PEC is an AA/EEO/Veteran/Disabled employer. PM21 PIf081a9b7874b-5277

Position Summary: The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Responsible for project completion in accordance with qualify assurance policies, standards and project specifications Prepare and review engineering plans and drawings Assist in the preparation of project proposals, cost estimates, and feasibility studies Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion Performs and/or directs design computations by hand and by computer software Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Perform quality control reviews at appropriate milestones Mentors, trains and develops less experienced staff Participates in business development activities to include developing and maintaining relationships with clients Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others, with minimal supervision. Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation Familiarity with local regulations, permitting processes, and design standards Excellent oral, written, and interpersonal communication skills. Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu RISA/RAM Enercalc Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing Structural Design & Calculations for Buildings Load Path Analysis Lateral Analysis - Seismic and Wind Load Lateral force-resisting systems Structural Elements Design (beams, columns, joists, slabs, walls, and foundations) Structural Materials (Steel, Concrete, Masonry, Wood) Storm Shelters Deep Foundation Systems Precision Equipment/Machine Foundations Pre-Engineered Metal Building Foundations Building Condition Assessments Structural Repair/Retrofit of Existing Buildings Education and Experience: Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required. Minimum four (4) years of experience in engineering. License and Certification: Professional Engineering (PE) license in the location of practice is required. Summary of Benefits Medical Dental Vision 401K Matching Life Insurance Short- and Long-Term Disability Maternity Leave Identity Theft Insurance Cancer Insurance Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A) : N/A PEC is an AA/EEO/Veteran/Disabled employer. PM21 PIa68-5275

Position Summary: The Project Engineer will be responsible for design on multiple projects, directing and/or leading other design professionals within their discipline, and working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for providing design deliverables for a variety of projects, while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Responsible for project completion in accordance with qualify assurance policies, standards and project specifications Prepare and review engineering plans and drawings Assist in the preparation of project proposals, cost estimates, and feasibility studies Performs and/or directs engineering design, coordination with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Serves as an advisor to the Project Manager, identifying and communicating any potential risk to the project in a timely fashion Performs and/or directs design computations by hand and by computer software Uses experience, education, and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Oversees tasks that have been delegated to other engineers and support staff Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Perform quality control reviews at appropriate milestones Mentors, trains and develops less experienced staff Participates in business development activities to include developing and maintaining relationships with clients Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others, with minimal supervision. Strong attention to detail and accuracy in preparing engineering plans, reports, and documentation Familiarity with local regulations, permitting processes, and design standards Excellent oral, written, and interpersonal communication skills. Knowledge and skill in determining project requirements, setting project scope of work, determining design budgets, determining preliminary construction budgets, and review of contracts. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu RISA/RAM Enercalc Experience with codes and regulations, interpreting plans, and design discipline specific project components as described below: Electrical Equipment Layout and Room Sizing Structural Design & Calculations for Buildings Load Path Analysis Lateral Analysis - Seismic and Wind Load Lateral force-resisting systems Structural Elements Design (beams, columns, joists, slabs, walls, and foundations) Structural Materials (Steel, Concrete, Masonry, Wood) Storm Shelters Deep Foundation Systems Precision Equipment/Machine Foundations Pre-Engineered Metal Building Foundations Building Condition Assessments Structural Repair/Retrofit of Existing Buildings Education and Experience: Minimum of a B.S. Degree in an appropriate field of study from an accredited college is required. Minimum four (4) years of experience in engineering. License and Certification: Professional Engineering (PE) license in the location of practice is required. Summary of Benefits Medical Dental Vision 401K Matching Life Insurance Short- and Long-Term Disability Maternity Leave Identity Theft Insurance Cancer Insurance Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A) : N/A PEC is an AA/EEO/Veteran/Disabled employer. PM21 PIa3cd1666e7ff-5276