706 jobs found

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $38.99/ hour including Master Certification $3,500 in bonuses Tool allowance of $400 per quarter Company-provided uniforms This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .

What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $39.99/ hour including Master Certification and shift differential. 2nd Shift, 3:00pm-11:30pm Monday - Friday Company-provided uniforms Tool allowance of $400 per quarter This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .

What you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Monday - Friday operation Night Shift, 11:00PM-7:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .

What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Experienced Trailer Mechanics can earn up to $34.75/ hour including shift differential. Night Shift, Monday-Friday, 9:30PM-5:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .

Heavy Duty Equipment Technician ABOUT UC SANTA CRUZ UC Santa Cruz is a public university like no other in California, combining the experience of a small, liberal arts college with the depth and rigor of a major research university. It's known as an unconventional place where innovation and experimentation is part of the campus's DNA. That playful, bold spirit still thrives today, all on a campus renowned as among the most beautiful in the world. DEPARTMENT OVERVIEW Physical Planning, Development & Operations (PPDO) manages and oversees all University activities and services related to physical and environmental planning, design and construction, engineering, physical plant maintenance and operations, capital planning and space management, and the associated business services necessary to support these functions. The University's main campus is spread across more than 2,000 acres and includes over 500 buildings comprising more than 8 million square feet. The department includes operating budgets of over $48 million, manages a capital project portfolio of approximately $500 million, and employs nearly 300 full-time staff to carry forth the duties necessary for the campus' development and operation. JOB SUMMARY Under the direction of the Fleet Services Technical Staff Supervisor, the Heavy-Duty Equipment Technician performs operational level heavy duty vehicular and equipment maintenance and repair duties. The Heavy Duty Equipment Technician inspects, maintains, repairs, diagnoses, adjusts, and replaces mechanical and electrical components on University-owned vehicles and equipment. Vehicles and equipment maintained include passenger sedans, light duty trucks, vans (both passenger and cargo), medium duty and heavy duty trucks, fire and police vehicles, passenger transport buses, tractors and landscape maintenance equipment, street sweepers, standby generators (1-kw to 150-kw), and other vehicles and equipment used in the day to day operations of the University. Systems and sub-systems maintained and repaired include but are not limited to the following: engine, transmission, ignition, fuel delivery, charging and starting, exhaust, electrical, drive-train, braking systems (both hydraulic and air actuated), air comfort, steering, suspension, and hydraulic systems. The incumbent will also perform fabrication and welding duties, operate and maintain shop tools and equipment, and document work performed. Additional duties include TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and shearing of various metals, including steel, aluminum, stainless steel, and cast aluminum. APPOINTMENT INFORMATION Budgeted Salary: $40.27-$50.09/hourly. Salary commensurate with skills, qualifications and experience. Under California law, the University of California, Santa Cruz is required to post a reasonable estimate of the compensation for this role. The salary shown above is the budgeted amount the University reasonably expects to pay and the salary extended should not exceed this posted amount. Benefits Level Eligibility: Full benefits Schedule Information: • Full-time, Fixed • Percentage of Time: 100%, 40 Hours per Week • Days of the Week: Mon-Fri • Shift Includes: Day Employee Classification: Career appointment Job End Date: None Work Location: UC Santa Cruz Main Campus Union Representation: Service Employees (SX) Job Code Classification: HVY DUTY EQUIP TCHN (008476) Travel: Never or Rarely JOB DUTIES 65% - Maintenance/Repair/Metal Fabrication • Performs or assists other Heavy-Duty Equipment Technicians and Automotive Technicians in major repair and maintenance of automotive and heavy-duty vehicles and equipment, including major system overhauls. • Maintains and repairs emission control systems to ensure conformity to all local, state, and Federal emission regulations. • Performs maintenance and repair to vehicles and equipment operating on gasoline, diesel motor fuel, propane, compressed natural gas, and electric-powered vehicles and equipment. • Reads and interprets basic blueprints and executes metal fabrication projects as directed. 15% - Diagnostic • Inspects automotive and heavy equipment to determine corrective action necessary. • Performs drivability diagnosis of computer-controlled systems. • Performs repairs in the most cost-efficient manner possible. 10% - Equipment Operation • Operates vehicles and equipment during the course of maintenance and repair. • Utilizes engine analyzers, emission analyzers. • Operates shop tools and equipment, operate welding and fabrication equipment. 10% - Record Keeping • Prepares maintenance and repair records. • Prepares work orders that accurately reflect time and materials used in the course of repairs. REQUIRED QUALIFICATIONS • Journeyman level experience and skill in automotive heavy vehicle and equipment maintenance and repair. • Experience in the operation and maintenance of tools and special tools used in the course of performing job duties. • Ability to perform welding and fabrication operations required in the course of performing job duties. • Knowledge in the proper use and operation of diagnostic equipment used in the course of performing job duties. • Ability to properly inspect vehicles and equipment for needed maintenance and repairs, and to perform those maintenance and repair operations. • Ability to safely operate University owned vehicles and equipment. • Ability to work both individually and cooperatively with others with minimal or no supervision. • Ability to identify and correct hazardous conditions and to exercise good judgment when to report unsafe and hazardous conditions. • Ability to prioritize work assignments to meet deadlines, flexibility to work with changing workloads and deadlines, good customer service skills and the ability to work with interruptions. • Good interpersonal skills to effectively interact with coworkers and the ability to exercise diplomacy in dealing with diverse groups of people. PREFERRED QUALIFICATIONS • Demonstrated experience completing advanced welding and fabrication projects such as TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and sheering of various metals including but not limited to steel, aluminum, stainless steel, and cast aluminum. SPECIAL CONDITIONS OF EMPLOYMENT • Selected candidate will be required to pass a pre-employment criminal history background check. • Selected candidate must pass the employment misconduct disclosure process. • Must possess a valid license to drive in the state of California and be able to participate in the Department of Motor Vehicles (DMV) pull notice program. • Must possess a valid Class B Commercial license to drive in the State of California, with passenger endorsement and a satisfactory driving record. License must not be restricted to vehicles 15 passengers or less including the driver, but must certify individual to drive passenger vehicles weighing more than 26, 001 gross vehicle weight rating (GVWR) and carrying 20 passengers or more including the driver (DMV CLASS B LICENSE WITH PASSENGER ENDORSEMENT). • Must possess, or obtain within 6 months of hire, a valid California Class B license to drive and participate in the Department of Motor Vehicles (DMV) pull notice program. Must participate in DOT drug testing program. • Ability to safely lift parts, components and supplies while bending, kneeling or stooping with or without accommodation. • Ability to safely push and move equipment weighing up to 160 pounds with or without accommodation. • Must have the ability to: operate a vacuum, floor scrubber, and polisher; use cleaning chemical compounds; perform essential custodial duties including dumping bags into dumpster or moving equipment and materials with or without accommodations. • Ability to occasionally work overtime with little or no advance notice, and work on-call to respond to emergencies after hours as necessary for emergency repairs. • Ability to work shift work, 6AM to 2:30PM. • Ability to work overtime including evenings, nights, weekends and holidays to meet operational needs, and work an alternate work schedule shift as required. • The University of California has implemented a covering all employees. Employees, including new hires, are required to comply with any applicable policies relating to the University of California vaccine program. • Per the Child Abuse and Neglect Reporting Act (CANRA), this position has been identified as a Mandated Reporter. The selected candidate will be required to report known or suspected child abuse or neglect as defined by CANRA and will be required to sign a Statement Acknowledging Requirement to Report Child Abuse prior to commencing employment. CANRA Penal Codes, and related definitions, requirements, and responsibilities may be obtained: leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=PEN&division=&title=1.∂=4.&chapter=2.&article=2.5. MISCONDUCT DISCLOSURE REQUIREMENT . click apply for full job details

What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Expected pay range: $29.36 to $37.09 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .

Maintenance Technician B - (II) Transdev in Lancaster, California is seeking an experienced B-Level Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining vehicles and equipment. As a Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. Transdev is proud to offer: Competitive compensation package of minimum $34.00 (70,720) - Maximum $41.00 (85,280) Benefits include: Vacation: minimum of two (2) weeks Sick days: 5 days Holidays: 12 days; 8 standard and 4 floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Company paid ASE testing, training materials Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: Conduct diagnostic tests using advanced tools and software to troubleshoot engine issues. Perform moderate complexity repairs and replacements on engine components, ensuring optimal functionality. Assist A-Level Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow. Execute routine maintenance tasks to prevent breakdowns and optimize engine performance. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for engines. Perform advanced troubleshooting and repair tasks on engines, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge Perform vehicle maintenance and repairs to ensure vehicles are safe for our customers. Diagnose and perform accurately all phases of vehicle and equipment repair including the repair of brakes, HVAC systems, engine tune-ups, suspensions, drive trains, transmissions, electrical systems, drivability and other repairs Assist with road calls and emergency service repairs Ensure work orders are completed properly and accurately. Maintain records of all maintenance work completed including parts and supplies used. Complete preventative maintenance (PMs), safety inspections, and annual maintenance inspections. Other duties as required. Qualifications: 5 years of experience as a Mechanic, preferred. 21 years or older Valid driver's license required with a clean driving record. Good fabrication and problem-solving skills Excellent communication skills. 5+ years of automotive or electric vehicle repair employment experience or combination of education & experience. Ability to pass a DOT physical examination, including a background and a drug test. Must have appropriate mechanic's tool set. ASE certifications preferred; ASE certification program provided Mechanic's Tool Set Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: Must be able to work shifts or flexible work schedules as needed. Ability to lift a minimum of 50 lbs Ability to perform work in all weather conditions The employee is generally subjected to long periods spent sitting, standing. Work environment will be a combination of both indoors and outdoors. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: PleaseClick Herefor CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6377 Pay Group: 2V9 Cost Center: 55374 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.

Wha t you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Up to $3,500 in bonuses available Monday - Friday operation 2nd or 3rd Shift Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here . Eligible participants who are hired while the program is in effect will receive a $1,500 sign-on bonus, if you voluntarily terminate employment before 12 months of continuous employment, you are required to repay 100% of the sign-on bonus. If you terminate employment after 12 months but before 24 months, you are required to repay 50% of the sign-on bonus. The sign-on bonus will be paid in accordance with the Company's payroll procedures on the normal payroll date following 30 days of your continuous employment. Current XPO employees are not eligible for sign-on bonuses. A $1,000 retention bonus will be paid to those eligible participants who are hired while the program is in effect and attain 6 months of continuous employment with XPO in their current qualified position. Eligible participants who are hired while the program is in effect and attain 12 months of continuous employment in their current qualified position will receive another $1,000 bonus. The bonuses are subject to all applicable taxes. All other rules governing this program will apply. Current XPO employees are not eligible for retention bonuses.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.